@zwave-js/config 15.7.0 → 15.9.0

package/config/devices/0x0086/dsb54.json

@@ -41,8 +41,7 @@
 		{
 			"#": "111",
 			"$import": "templates/aeotec_template.json#low_battery_interval",
-			"maxValue": 4294967295,
-			"defaultValue": 86640
+			"maxValue": 4294967295
 		},
 		{
 			"#": "121[0x01]",

package/config/devices/0x0086/dsc26.json

@@ -60,10 +60,10 @@
 		}
 	],
 	"metadata": {
-		"wakeup": "Press and release the button which is on Micro Smart Energy Switch G2.",
-		"inclusion": "1. Start by placing the controller into inclusion mode.\n2. While the Micro Smart Energy Switch G2 is powered in a 3-wire system, the external switch/button can be toggled to initiate pairing into the Z-Wave network. Or the internal button can be pushed to initiate pairing into the Z-Wave network if the Micro Smart Energy Switch G2 was not put into in-wall box.",
-		"exclusion": "1. Start by placing the controller into exclusion mode.\n2. While the Micro Smart Energy Switch G2 is powered in a 3-wire system, the external switch/button can be toggled 10 times in quick succession to initiate removing from the Z-Wave network. Or the internal button can be pushed to initiate pairing into the Z-Wave network if Micro Smart Energy Switch G2 was not put into in-wall box.",
-		"reset": "Press and hold the button which is on Micro Smart Energy Switch G2 for 20 seconds",
+		"wakeup": "Press and release the button on the device.",
+		"inclusion": "1. Toggle the external switch/button to start inclusion.\n2. Alternatively, press the internal button if the device is not installed in-wall.",
+		"exclusion": "1. Toggle the external switch/button 10 times in quick succession.\n2. Alternatively, press the internal button if the device is not installed in-wall.",
+		"reset": "Press and hold the button on the device for 20 seconds.",
 		"manual": "https://help.aeotec.com/support/solutions/articles/6000165733-micro-switch-g2-user-guide-"
 	}
 }

package/config/devices/0x0086/zw056.json

@@ -202,9 +202,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the Action button.",
+		"exclusion": "Short press the Action button.",
+		"reset": "Press and hold the Action button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1307/Doorbell%20manual(20150604).pdf"
 	}
 }

package/config/devices/0x0086/zw062.json

@@ -314,9 +314,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find on the product's housing",
-		"reset": "Press and hold the Z-Wave button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the Z-Wave button.",
+		"exclusion": "Short press the Z-Wave button.",
+		"reset": "Press and hold the Z-Wave button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1445/Aeon%20Labs%20Garage%20Door%20Controller%20Gen5%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw074.json

@@ -171,9 +171,9 @@
 		"forceNotificationIdleReset": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
-		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Z-Wave button on the back of the device.",
+		"exclusion": "Short press the Z-Wave button on the back of the device.",
+		"reset": "Press and hold the Z-Wave button on the back of the device for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1163/Instructions%20-%20MultiSensor%20Gen5%20MCert1.pdf"
 	}
 }

package/config/devices/0x0086/zw075.json

@@ -168,9 +168,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button.",
+		"exclusion": "Short press the Action button.",
+		"reset": "Press and hold the Action button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1056/Aeon%20Labs%20Smart%20Switch%20Gen5_Update%202.pdf"
 	}
 }

package/config/devices/0x0086/zw078.json

@@ -50,7 +50,7 @@
 		},
 		{
 			"#": "80",
-			"$import": "/templates/aeotec_template.json#enable_notifications"
+			"$import": "templates/aeotec_template.json#enable_notifications"
 		},
 		{
 			"#": "90",
@@ -143,17 +143,17 @@
 		},
 		{
 			"#": "252",
-			"$import": "/templates/aeotec_template.json#lock_configuration"
+			"$import": "templates/aeotec_template.json#lock_configuration"
 		},
 		{
 			"#": "255",
-			"$import": "/templates/aeotec_template.json#factory_reset_exclude"
+			"$import": "templates/aeotec_template.json#factory_reset_exclude"
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button",
-		"reset": "Press and hold the Z-Wave button for 20 seconds and then release",
+		"inclusion": "Short press the Z-Wave button.",
+		"exclusion": "Short press the Z-Wave button.",
+		"reset": "Press and hold the Z-Wave button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/998/Engineering%20Spec%20-%20Aeon%20Labs%20Heavy%20Duty%20Smart%20Switch%20Gen5.pdf"
 	}
 }

package/config/devices/0x0086/zw080.json

@@ -80,9 +80,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button.",
+		"exclusion": "Short press the Action button.",
+		"reset": "Press and hold the Action button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1141/Siren%20Gen5%20Manual.pdf"
 	}
 }

package/config/devices/0x0086/zw088.json

@@ -43,7 +43,7 @@
 		}
 	],
 	"metadata": {
-		"reset": "Press and hold the 'Mode' button and 'Learn' button for 20 seconds and then release",
+		"reset": "Press and hold the Mode button and Learn button for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1165/Instructions%20-%20Aeon%20Labs%20Key%20Fob%20Gen5%20MCert.pdf"
 	}
 }

package/config/devices/0x0086/zw089.json

@@ -70,9 +70,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
-		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Z-Wave button on the back of the device.",
+		"exclusion": "Short press the Z-Wave button on the back of the device.",
+		"reset": "Press and hold the Z-Wave button on the back of the device for 20 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1179/Recessed%20Door%20Sensor%20Gen5%20-%20Manual%20MCert.pdf"
 	}
 }

package/config/devices/0x0086/zw090.json

@@ -55,12 +55,12 @@
 			"$import": "templates/aeotec_template.json#factory_reset"
 		}
 	],
-	"metadata": {
-		"reset": "Use this procedure only in the event that the primary controller is missing or otherwise inoperable.\n\nPress and hold the Action Button on Z-Stick for 20 seconds and then release",
-		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1345/Z%20Stick%20Gen5%20manual%201.pdf"
-	},
 	"compat": {
 		// Workaround for a firmware bug in 500 series controllers
 		"$import": "~/templates/master_template.json#500_series_controller_compat_flags"
+	},
+	"metadata": {
+		"reset": "Press and hold the Action Button for 20 seconds and then release.",
+		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1345/Z%20Stick%20Gen5%20manual%201.pdf"
 	}
 }

package/config/devices/0x0086/zw095.json

@@ -444,9 +444,9 @@
 		"preserveRootApplicationCCValueIDs": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 10 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product housing",
+		"exclusion": "Short press the Action button on the product housing",
+		"reset": "Press and hold the Action button on the product housing for 10 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2046/Home%20Energy%20Meter%20Gen5%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw096.json

@@ -180,9 +180,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the Action button on the device housing",
+		"exclusion": "Short press the Action button on the device housing",
+		"reset": "Press and hold the Action button on the device housing for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3119/Instructions%20-%20Aeon%20Labs%20Smart%20Switch%206%20(2).pdf"
 	}
 }

package/config/devices/0x0086/zw097.json

@@ -64,9 +64,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
-		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action Button on the back of the product",
+		"exclusion": "Short press the Action Button on the back of the product",
+		"reset": "Press the Action Button on the back of the product for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1495/Dry%20Contact%20Sensor%20Gen5%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw098.json

@@ -375,9 +375,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, press the external switch of LED Bulb to turn it off and then press the external switch again to turn it on",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times",
-		"reset": "Turn the controller of Z-Wave network into exclusion mode, press the external switch of LED Bulb to turn off and then press the external switch again to turn on it, repeat the operation 3 times.\nAfter the LED Bulb is excluded from network, it will be reset to factory default state.\nUse this procedure only in the event that your primary network controller is missing or inoperable",
+		"inclusion": "Press the external switch to turn the LED Bulb off and then press the external switch again to turn it on",
+		"exclusion": "Press the external switch to turn the LED Bulb off and then press the external switch again to turn it on. Repeat this operation 3 times",
+		"reset": "Press the external switch to turn the LED Bulb off and then press the external switch again to turn it on. Repeat this operation 3 times",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1851/LED%20Bulb%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw099.json

@@ -183,9 +183,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product housing",
+		"exclusion": "Short press the Action button on the product housing",
+		"reset": "Press and hold the Action button on the product housing for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2246/Aeon%20Labs%20Smart%20Dimmer%206%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw100.json

@@ -572,9 +572,9 @@
 		"reportTimeout": 2000
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
-		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Z-Wave button on the back of the product",
+		"exclusion": "Short press the Z-Wave button on the back of the product",
+		"reset": "Press and hold the Z-Wave button on the back of the product for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1390/Aeon%20Labs%20MultiSensor%206%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw111.json

@@ -492,9 +492,9 @@
 		"treatMultilevelSwitchSetAsEvent": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product housing",
+		"exclusion": "Short press the Action button on the product housing",
+		"reset": "Press and hold the Action button on the product housing for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2149/Aeon%20Labs%20Nano%20Dimmer%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw112.json

@@ -87,9 +87,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
-		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action Button on the back of the product",
+		"exclusion": "Short press the Action Button on the back of the product",
+		"reset": "Press the Action Button on the back of the product for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1611/Door%20Window%20Sensor%206%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw116.json

@@ -440,9 +440,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product housing",
+		"exclusion": "Short press the Action button on the product housing",
+		"reset": "Press and hold the Action button on the product housing for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2208/Nano%20Switch%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw117.json

@@ -74,9 +74,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, press the Z-Wave Button on Range Extender 6",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, press the Z-Wave Button on Range Extender 6",
-		"reset": "Press and hold the Z-Wave Button for 20 seconds and then release it.\nUse this procedure only in the event that your primary network controller is missing or inoperable",
+		"inclusion": "Press the Z-Wave Button on Range Extender 6",
+		"exclusion": "Press the Z-Wave Button on Range Extender 6",
+		"reset": "Press and hold the Z-Wave Button for 20 seconds and then release it",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2520/Range%20Extender%206%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw120.json

@@ -84,9 +84,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
-		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action Button on the back of the product.",
+		"exclusion": "Short press the Action Button on the back of the product.",
+		"reset": "Press and hold the Action Button on the back of the product for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1574/Door%20Window%20Sensor%20Gen5%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw121.json

@@ -373,9 +373,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, press the Action Button on the LED Strip Controller",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, press the Action Button on the LED Strip Controller",
-		"reset": "Press and hold the Action Button on the LED Strip Controller for 20 seconds and then release it.\nUse this procedure only in the event that your primary network controller is missing or inoperable",
+		"inclusion": "Press the Action Button on the LED Strip Controller.",
+		"exclusion": "Press the Action Button on the LED Strip Controller.",
+		"reset": "Press and hold the Action Button on the LED Strip Controller for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1963/LED%20Strip%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw122.json

@@ -390,9 +390,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find on the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find on the product",
-		"reset": "Press and hold the Action Button that you can find on the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action Button on the product.",
+		"exclusion": "Short press the Action Button on the product.",
+		"reset": "Press and hold the Action Button on the product for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2407/Aeon%20Labs%20Water%20Sensor%206%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw129.json

@@ -106,7 +106,7 @@
 		}
 	],
 	"metadata": {
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"reset": "Press and hold the Action button on the product's housing for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2232/Aeon%20Labs%20WallMote%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw130.json

@@ -132,9 +132,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
+		"inclusion": "Short press the Action button on the product's housing.",
+		"exclusion": "Short press the Action button on the product's housing.",
+		"reset": "Press and hold the Action button on the product's housing for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3264/Aeon%20Labs%20WallMote%20Quad%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw132.json

@@ -513,9 +513,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product's housing.",
+		"exclusion": "Short press the Action button on the product's housing.",
+		"reset": "Press and hold the Action button on the product's housing for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2136/Dual%20Nano%20Switch%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw139.json

@@ -304,9 +304,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product's housing.",
+		"exclusion": "Short press the Action button on the product's housing.",
+		"reset": "Press and hold the Action button on the product's housing for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2306/Nano%20Switch%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw140.json

@@ -304,9 +304,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
+		"inclusion": "Short press the Action button on the product's housing.",
+		"exclusion": "Short press the Action button on the product's housing.",
+		"reset": "Press and hold the Action button on the product's housing for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2247/Dual%20Nano%20Switch%20manual.pdf"
 	}
 }

package/config/devices/0x0086/zw141.json

@@ -110,9 +110,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing.\n\nIf the Nano Dimmer has been successfully added to your Z-Wave network, its RGB LED will be solid. If unsuccessful, the red LED will be on for 2 seconds and then remain a colorful gradient, repeat the instructions above from step 1.",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, quick press the product's Action button 6 times that you can find on the product's housing or toggle the external manual switch 2 times in fast succession.\n\nIf the Nano Dimmer has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load), repeat the instructions above from step 1",
-		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or otherwise inoperable",
+		"inclusion": "Short press the Action button on the product's housing. If successful, the RGB LED will be solid. If unsuccessful, the red LED will be on for 2 seconds and then remain a colorful gradient.",
+		"exclusion": "Quick press the Action button 6 times on the product's housing or toggle the external manual switch 2 times in fast succession. If successful, the RGB LED will remain colorful gradient. If unsuccessful, the RGB LED will still be solid.",
+		"reset": "Press and hold the Action button on the product's housing for 20 seconds and then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3269/Aeon%20Labs%20Nano%20Shutter%20-manual%20-%202.pdf"
 	}
 }

package/config/devices/0x0090/8225.json

@@ -172,9 +172,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
-		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
+		"inclusion": "Press button A on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.",
+		"exclusion": "Press button A on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"reset": "1. Remove the battery pack.\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3353/Baldwin_8225_Product_Manual_5_9.pdf"
 	}
 }

package/config/devices/0x0090/8252.json

@@ -172,9 +172,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
-		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
+		"inclusion": "Press button A on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.",
+		"exclusion": "Press button A on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"reset": "1. Remove the battery pack.\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3070/Install_Guide_8285_9_5_2018.pdf"
 	}
 }

package/config/devices/0x0090/910.json

@@ -235,9 +235,9 @@
 		]
 	},
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
-		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
+		"inclusion": "Press button A on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.",
+		"exclusion": "Press button A on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"reset": "1. Remove the battery pack.\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2239/Install_Guide_910_02_27_2017.pdf"
 	}
 }

package/config/devices/0x0090/ged1455.json

@@ -221,9 +221,9 @@
 		]
 	},
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
-		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
+		"inclusion": "Press button A on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.",
+		"exclusion": "Press button A on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"reset": "1. Remove the battery pack.\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.",
 		"manual": "http://www.weiserlock.com/PDFs/instructions/Electronics/SmartCode_5_Installation_and_User_Guide_English.pdf"
 	}
 }

package/config/devices/0x0090/ged2350.json

@@ -172,9 +172,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
-		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
+		"inclusion": "Press button A on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.",
+		"exclusion": "Press button A on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"reset": "1. Remove the battery pack.\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2377/Install%20Guide%20GED2350%2004242017.pdf"
 	}
 }

package/config/devices/0x0090/smartcode_888.json

@@ -184,9 +184,9 @@
 		]
 	},
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
-		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
+		"inclusion": "Press button A on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.",
+		"exclusion": "Press button A on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"reset": "1. Remove the battery pack.\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2176/Install%20Guide%20888%20ENG_Merged.pdf"
 	}
 }

package/config/devices/0x0094/2gig-edg-n.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"reset": "Reset Controller\nAvailable only for Installers, the Reset Controller option\nis also found on the Z-Wave settings menu.\nReset the panel's Z-Wave Controller back to default\nsettings.\n1. Tap Reset Controller",
+		"reset": "Tap 'Reset Controller' in the Settings menu.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4076/10029908%20Rev-X11b%20-%202GIG%20Edge%20User%20Guide_sm.pdf"
 	}
 }