@zwave-js/config 15.7.0 → 15.9.0

package/config/devices/0x0136/sl-1500.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "1. Click the customize button on the upper right-hand corner of the mashup. \n2. Click Select App.\n3. Select the proper application.\n4. As list of gateways appear on the Gateways mashup, click the Manage Gateways button. \n5. In the lower left-hand corner, press the Factory Reset button.\n6. Confirm the factory reset.",
+		"reset": "1. Click the customize button on the upper right-hand corner of the mashup.\n2. Click Select App.\n3. Select the proper application.\n4. As list of gateways appear on the Gateways mashup, click the Manage Gateways button.\n5. In the lower left-hand corner, press the Factory Reset button.\n6. Confirm the factory reset.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1275/SysLINK%201000%20User%20Guide%20-%20Z-Wave%20Market%20Certification.docx"
 	}
 }

package/config/devices/0x0138/smco400.json

@@ -50,9 +50,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "ADDING ALARM\n1. Slide battery door open.\n2. Insert batteries checking the correct orientation.\n3. Press and hold the test button with your finger or thumb. Keep it held down as you slide the battery drawer closed. You may then release the button.\nNOTE: Use only your finger or thumb on the test button. The use of any other instrument is strictly prohibited",
-		"exclusion": "REMOVING ALARM\n1. Slide battery door open.\n2. Remove and re-insert batteries checking the correct orientation.\n3. Press and hold the test button with your finger or thumb. Keep it held down as you slide the battery drawer closed. You may then release the button.\nNOTE: Use only your finger or thumb on the test button. The use of any other instrument is strictly prohibited",
-		"reset": "RESETTING ALARM\nIf the device is powered up with the test button held down for 10+ seconds, the device will reset all Z-Wave settings and leave the network.\nUpon completion of the Reset operation, the LED will glow and the horn will sound for ~1 second.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "1. Slide battery door open.\n2. Insert batteries checking the correct orientation.\n3. Press and hold the test button with your finger or thumb.\n4. Keep it held down as you slide the battery drawer closed.\n5. Release the button.",
+		"exclusion": "1. Slide battery door open.\n2. Remove and re-insert batteries checking the correct orientation.\n3. Press and hold the test button with your finger or thumb.\n4. Keep it held down as you slide the battery drawer closed.\n5. Release the button.",
+		"reset": "Press and hold the test button for 10+ seconds while powering up the device. Upon completion of the Reset operation, the LED will glow and the horn will sound for ~1 second.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4087/User_Manual_M08-0456-170694.pdf"
 	}
 }

package/config/devices/0x0138/zcombo-g.json

@@ -53,10 +53,10 @@
 		}
 	],
 	"metadata": {
-		"wakeup": "WAKEUP\n1. Slide battery door open and then closed with the batteries inserted.",
-		"inclusion": "ADD\n1. Slide battery door open.\n2. Insert batteries checking the correct orientation.\n3. Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button.\nNOTE: Use only your finger or thumb on the test button. The use of any other instrument is strictly prohibited",
-		"exclusion": "REMOVE\n1. Slide battery door open.\n2. Remove and re-insert batteries checking the correct orientation.\n3. Press and hold the test button. Keep it held down as you slide the battery drawer closed. You may then release the button.\nNOTE: Use only your finger or thumb on the test button. The use of any other instrument is strictly prohibited",
-		"reset": "RESET DEVICE\nIf the device is powered up with the test button held down for 10+ seconds, the device will reset all Z-Wave settings and leave the network.\nUpon completion of the Reset operation, the LED will glow and the horn will sound for ~1 second.\nPlease use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"wakeup": "Slide battery door open and then closed with the batteries inserted.",
+		"inclusion": "1. Slide battery door open.\n2. Insert batteries checking the correct orientation.\n3. Press and hold the test button.\n4. Keep it held down as you slide the battery drawer closed.\n5. Release the button.",
+		"exclusion": "1. Slide battery door open.\n2. Remove and re-insert batteries checking the correct orientation.\n3. Press and hold the test button.\n4. Keep it held down as you slide the battery drawer closed.\n5. Release the button.",
+		"reset": "Press and hold the test button for 10+ seconds while powering up the device. Upon completion of the Reset operation, the LED will glow and the horn will sound for ~1 second.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3886/User_Manual_M08-0456-173833_D2.pdf"
 	}
 }

package/config/devices/0x013c/nsg-ab-02.json

@@ -96,6 +96,6 @@
 	"metadata": {
 		"inclusion": "Press the On/Off button three times within 2 seconds.",
 		"exclusion": "Press the On/Off button three times within 2 seconds.",
-		"reset": "1. Press the On/Off button three times within 2 seconds\n2. Within 1 second, press the On/Off button again for 5 seconds"
+		"reset": "1. Press the On/Off button three times within 2 seconds.\n2. Within 1 second, press the On/Off button again for 5 seconds."
 	}
 }

package/config/devices/0x013c/pac01.json

@@ -17,7 +17,7 @@
 	"metadata": {
 		"inclusion": "Press the Include button three times within 2 seconds.",
 		"exclusion": "Press the Include button three times within 2 seconds.",
-		"reset": "1. Press the Include button three times within 2 seconds\n2. Within 1 second, press the Include button again for 5 seconds",
+		"reset": "1. Press the Include button three times within 2 seconds.\n2. Within 1 second, press the Include button again for 5 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3619/PAC01_UserManual.pdf"
 	}
 }

package/config/devices/0x013c/pad07.json

@@ -36,7 +36,7 @@
 		{
 			"#": "2",
 			"label": "LED Indication Mode",
-			"description": "1. show dimmer state：when dimmer is on, LED is on. when dimmer is off, LED is off. the default setting is show dimmer state.  2. show night mode：when dimmer is on, LED is off. when dimmer is off, LED is on.  3. one flash mode : when dimmer on/off state changes, LED will light on one second and then off",
+			"description": "1. show dimmer state: when dimmer is on, LED is on. when dimmer is off, LED is off. the default setting is show dimmer state.  2. show night mode: when dimmer is on, LED is off. when dimmer is off, LED is on.  3. one flash mode : when dimmer on/off state changes, LED will light on one second and then off",
 			"valueSize": 1,
 			"unit": "seconds",
 			"defaultValue": 1,
@@ -59,7 +59,7 @@
 		{
 			"#": "3",
 			"label": "External Switch Type",
-			"description": "1. one switch mode：only s1 can dim up the light bulb to brightest level, then dim down to darkest level, and so on…  2. two switch mode：s1 and s2 can dim up the light bulb to brightest level, then dim down to darkest level, and so on…  3. up/down switch mode：s1 can only dim up the light bulb to brightest level, and s2 can only dim down to off",
+			"description": "1. one switch mode: only s1 can dim up the light bulb to brightest level, then dim down to darkest level, and so on…  2. two switch mode: s1 and s2 can dim up the light bulb to brightest level, then dim down to darkest level, and so on…  3. up/down switch mode: s1 can only dim up the light bulb to brightest level, and s2 can only dim down to off",
 			"valueSize": 1,
 			"defaultValue": 1,
 			"allowManualEntry": false,
@@ -104,7 +104,7 @@
 	"metadata": {
 		"inclusion": "Press the Include button three times within 2 seconds.",
 		"exclusion": "Press the Include button three times within 2 seconds.",
-		"reset": "1. Press the Include button three times within 2 seconds\n2. Within 1 second, press the Include button again for 5 seconds",
+		"reset": "1. Press the Include button three times within 2 seconds.\n2. Within 1 second, press the Include button again for 5 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2356/PAD07-A1%20manual-20170413.pdf"
 	}
 }

package/config/devices/0x013c/pad09.json

@@ -46,7 +46,7 @@
 	"metadata": {
 		"inclusion": "Press the Include button three times within 2 seconds.",
 		"exclusion": "Press the Include button three times within 2 seconds.",
-		"reset": "1. Press the Include button three times within 2 seconds\n2. Within 1 second, press the Include button again for 5 seconds",
+		"reset": "1. Press the Include button three times within 2 seconds.\n2. Within 1 second, press the Include button again for 5 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3142/PAD09_UserManual_Philio.pdf"
 	}
 }

package/config/devices/0x013c/pan15-1-nes.json

@@ -91,7 +91,7 @@
 		{
 			"#": "9",
 			"label": "Rf Off Command Mode",
-			"description": "Whenever a switch off command, basic_set、binary_switch_set、switch_all_off, is received, it could be interpreted as 4 variety of commands.  1.switch off：it switches to off state. the default setting is switch off.  2.ignore：the switch off command will be ignored.  3.switch toggle：it switches to the inverse of current state.  4.switch on：it switches to on state",
+			"description": "Whenever a switch off command, basic_set、binary_switch_set、switch_all_off, is received, it could be interpreted as 4 variety of commands.  1.switch off: it switches to off state. the default setting is switch off.  2.ignore: the switch off command will be ignored.  3.switch toggle: it switches to the inverse of current state.  4.switch on: it switches to on state",
 			"valueSize": 1,
 			"defaultValue": 0,
 			"allowManualEntry": false,

package/config/devices/0x013c/pan26.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Press the middle button (button ⑤) three times within 2 seconds.",
-		"exclusion": "Press the middle button (button ⑤) three times within 2 seconds.",
-		"reset": "Press and hold the middle button (button ⑤) four times, keeping it held on the 4th press for 3-10 seconds, then release.",
+		"inclusion": "Press the middle button three times within 2 seconds.",
+		"exclusion": "Press the middle button three times within 2 seconds.",
+		"reset": "Press and hold the middle button four times, keeping it held on the 4th press for 3-10 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3603/PAN26%20manual-20190806.pdf"
 	}
 }

package/config/devices/0x013c/pan34.json

@@ -96,9 +96,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Press the Include Button three times within 2 seconds.",
-		"exclusion": "Press the Include Button three times within 2 seconds.",
-		"reset": "1. Press the Include Button three times within 2 seconds\n2. Within 1 second, press the On/Off button for 5 seconds",
+		"inclusion": "Press the Include button three times within 2 seconds.",
+		"exclusion": "Press the Include button three times within 2 seconds.",
+		"reset": "1. Press the Include button three times within 2 seconds\n2. Within 1 second, press the On/Off button for 5 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4250/PAN34%20manual-20210713.pdf"
 	}
 }

package/config/devices/0x013c/psc03.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Click Reset Gateway to reset the Z-Wave controller.",
+		"reset": "Click the Reset Gateway button.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2964/PSC03%20Gateway%20User%20ManualV1.1_20180613.pdf"
 	}
 }

package/config/devices/0x013c/psm09.json

@@ -28,8 +28,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Press the tamper key three times within 3 seconds. If successful, the LED will flash slowly.",
-		"exclusion": "Press the tamper key three times within 3 seconds. If successful, the code light will flash for 30 seconds.",
+		"inclusion": "Press the tamper key three times within 3 seconds.",
+		"exclusion": "Press the tamper key three times within 3 seconds.",
 		"reset": "1. Press the button three times in three seconds\n2. The LED will flash slowly for one second\n3. Press and hold the button until the LED lights up\n4. After about three seconds, the LED will turn off\n5. Release the button within two seconds\nIf successful, the LED will flash once per second.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3462/PSM09_UserManual_0624.pdf"
 	}

package/config/devices/0x013c/psr03-b.json

@@ -121,7 +121,7 @@
 	"metadata": {
 		"inclusion": "Press the key three times within 1.5 seconds.",
 		"exclusion": "Press the key three times within 1.5 seconds.",
-		"reset": "1. Press and hold the key four times within 1.5 seconds, keeping it held on the 4th press until the LED lights up\n2. Release the key within 2 seconds after the LED turns off.",
+		"reset": "1. Press and hold the key four times within 1.5 seconds, keeping it held on the 4th press\n2. Wait for the LED to light up for 3 seconds, then turn off\n3. Release the key within 2 seconds after the LED turns off",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1407/PSR03_ABC_version_Manual.pdf"
 	},
 	"compat": {

package/config/devices/0x013c/psr07.json

@@ -65,7 +65,7 @@
 	"metadata": {
 		"inclusion": "1. Rotate to area A\n2. Press the button three times within 1.5 seconds",
 		"exclusion": "1. Rotate to area A\n2. Press the button three times within 1.5 seconds",
-		"reset": "1. Rotate to area A\n2. Press and hold the button four times within 1.5 seconds, keeping it held on the 4th press until the red LED lights up\n3. Release the button within 2 seconds after the red LED turns off.",
+		"reset": "1. Rotate to area A\n2. Press and hold the button four times within 1.5 seconds, keeping it held on the 4th press\n3. Wait for the red LED to light up for 3 seconds, then turn off\n4. Release the button within 2 seconds after the red LED turns off",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1988/PSR07_UserManual.pdf"
 	}
 }

package/config/devices/0x013c/pst02-a-br.json

@@ -304,9 +304,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Press any tamper key three times within 1.5 seconds.\nNote: There are two tamper keys - one on the back side and one on the front side.",
-		"exclusion": "Press any tamper key three times within 1.5 seconds.\nNote: There are two tamper keys - one on the back side and one on the front side.",
-		"reset": "1. Press and hold any tamper key four times within 1.5 seconds, keeping it held on the 4th press until the LED lights up\n2. Release the tamper key within 2 seconds after the LED turns off\nNote: There are two tamper keys - one on the back side and one on the front side.",
+		"inclusion": "Press any tamper key three times within 1.5 seconds.",
+		"exclusion": "Press any tamper key three times within 1.5 seconds.",
+		"reset": "1. Press and hold any tamper key four times within 1.5 seconds, keeping it held on the 4th press\n2. Wait for the LED to light up for 3 seconds, then turn off\n3. Release the tamper key within 2 seconds after the LED turns off",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2625/Manual.pdf"
 	}
 }

package/config/devices/0x013c/pst02a.json

@@ -299,8 +299,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Triple-click the tamper switch within 1.5 seconds.",
-		"exclusion": "Triple-click the tamper switch within 1.5 seconds.",
-		"reset": "1. Press and hold the tamper key four times within 1.5 seconds, keeping it held on the 4th press until the LED lights up\n2. Release the tamper key within 2 seconds after the LED turns off."
+		"inclusion": "Press the tamper switch three times within 1.5 seconds.",
+		"exclusion": "Press the tamper switch three times within 1.5 seconds.",
+		"reset": "1. Press and hold the tamper key four times within 1.5 seconds, keeping it held on the 4th press\n2. Wait for the LED to light up for 3 seconds, then turn off\n3. Release the tamper key within 2 seconds after the LED turns off"
 	}
 }

package/config/devices/0x013c/pst02b.json

@@ -221,8 +221,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Triple-click the tamper switch within 1.5 seconds.",
-		"exclusion": "Triple-click the tamper switch within 1.5 seconds.",
-		"reset": "1. Press and hold the tamper key four times within 1.5 seconds, keeping it held on the 4th press until the LED lights up\n2. Release the tamper key within 2 seconds after the LED turns off."
+		"inclusion": "Press the tamper switch three times within 1.5 seconds.",
+		"exclusion": "Press the tamper switch three times within 1.5 seconds.",
+		"reset": "1. Press and hold the tamper key four times within 1.5 seconds, keeping it held on the 4th press\n2. Wait for the LED to light up for 3 seconds, then turn off\n3. Release the tamper key within 2 seconds after the LED turns off"
 	}
 }

package/config/devices/0x0140/fkabz002.json

@@ -15,9 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add the product to the system, please follow the following steps. \n1. Start the COQON App \n2. Select \"Device\" then \"Settings\" and tap on \"+\" to add your Window Sensor \n3. Select COQON \n4. Follow the steps in the App",
-		"exclusion": "To remove your device from the system, please start the exclusion process to exclude the device from the COQON App. The device will be reset.",
-		"reset": "Factory reset: \n\n1. Remove battery \n2. Hold the Tamper\n3. Insert Battery \n4. Release Tamper within 5 sec. \n\nNote: Please use this procedure only when the primary controller is missing or inoperable!",
+		"reset": "1. Remove battery\n2. Hold the tamper button\n3. Insert battery\n4. Release tamper button within 5 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3022/FKABZ002New.pdf"
 	}
 }

package/config/devices/0x0140/sc428zw.json

@@ -160,9 +160,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Refer to the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n• Locate the Device Specific Key (DSK) label located on the back(plug side) of the SmartPlug, scan QR code to obtain DSK.\n• Plug the SmartPlug switch into an AC outlet at the desired location to account for any radio interference.\n• Press the Multi Button once to initiate adding the device to the network",
-		"exclusion": "Refer to the instructions for your Z-Wave certified controller to remove a device to the Z-Wave network.\n• Press the Multi Button once to remove the switch from the network",
-		"reset": "Press and hold the Multi Button for more than 10 seconds.\nThe amber LED will be illuminated for 2 seconds while it searches\nfor the network. Please use this procedure only when the network\nprimary controller is missing or otherwise inoperable",
+		"inclusion": "Press the Multi Button once.",
+		"exclusion": "Press the Multi Button once.",
+		"reset": "Press and hold the Multi Button for more than 10 seconds. The amber LED will be illuminated for 2 seconds while it searches for the network.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4098/SMC-QG-SC428ZW-20213v1_20210308.pdf"
 	}
 }

package/config/devices/0x0147/razberry7_pro.json

@@ -14,7 +14,6 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Z-Wave Serial API SetDefault command is used to reset the RaZberry7 Pro board to factory default settings.",
 		"manual": "https://rus.z-wave.me/drive/?file=24e4716409e82d0e27379e3e5208c8667b99"
 	}
 }

package/config/devices/0x0149/wmsr.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Press \"Factory Reset\" on the controller Setup menu. \nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\"",
+		"reset": "Press \"Factory Reset\" on the Setup menu.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2754/WiDom%20Controller%20Quick%20Guide.pdf"
 	}
 }

package/config/devices/0x014a/ddls2-zwave5.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED on the front of the unit will turn off when included.",
-		"exclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch.",
+		"inclusion": "Press the inclusion / exclusion button on the device. The LED on the front of the unit will turn off when included.",
+		"exclusion": "Press the inclusion / exclusion button on the device.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2781/DDLS2-ZWAVE5_Prod_Rev02.pdf"
 	}
 }

package/config/devices/0x014a/dls-zwave5.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"inclusion": "1. Locate the light switch desired to be used with the Light Switch.\n2. Press the inclusion button on the Light Switch.\n3. The LED on the front of the unit will turn off when included.",
+		"inclusion": "Press the inclusion button on the Light Switch. The LED on the front of the unit will turn off when included.",
 		"exclusion": "Press the inclusion / exclusion button on the Light Switch.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2164/Ecolink%20Decora%20Light%20Switch%20Z-Wave%20Plus%20Manual.pdf"
 	}

package/config/devices/0x014a/dtls2-zwave5.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED on the front of the unit will turn off when network inclusion occurs.",
-		"exclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED in front of the unit will blink steadily when network exclusion occurs.",
+		"inclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED on the front of the unit will turn off when included.",
+		"exclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED in front of the unit will blink steadily when excluded.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2863/DTLS2-ZWAVE5_Prod_Rev06.pdf"
 	}
 }

package/config/devices/0x014a/dwzwave25.json

@@ -31,8 +31,8 @@
 		"forceNotificationIdleReset": true
 	},
 	"metadata": {
-		"wakeup": "Removing the top case from the sensor will put in device into a tampered mode in which the sensor will stay awake and able to receive messages.",
-		"inclusion": "1. Activate inclusion mode for the sensor by removing the plastic pull-tab from the back of the sensor.\n2. When the inclusion process is complete, the LED on the sensor will be solid blue, then go out.",
+		"wakeup": "Remove the top case from the sensor to put the device into a tampered mode in which the sensor will stay awake and able to receive messages.",
+		"inclusion": "1. Remove the plastic pull-tab from the back of the sensor.\n2. The LED on the sensor will be solid blue, then go out when inclusion is complete.",
 		"exclusion": "1. Remove the cover of the sensor.\n2. Remove the battery for 10 seconds.\n3. Reinsert the battery and replace the sensor cover.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1498/D.W.%20Zwave%20Manual%20R1.04.docx"
 	}

package/config/devices/0x014a/ff-zwave5-eco.json

@@ -16,8 +16,8 @@
 	},
 	"metadata": {
 		"inclusion": "Press the learn button for 1 second which is located on the PCB between the LED and the tamper switch. If the LED starts blinking continuously, the sensor was not successfully added.",
-		"exclusion": "Press the learn button located near the LED and Tamper switch. The sensor's LED should blink continuously when removed.",
-		"reset": "1. Put the battery into the sensor.\n2. Do not press the tamper switch.\n3. Hold the learn button down for 10 seconds until the LED turns RED.\n4. Release the learn button and the sensor's green LED will 'breath' on and off continuously.",
+		"exclusion": "Press the learn button located near the LED and tamper switch. The sensor's LED should blink continuously when removed.",
+		"reset": "1. Put the battery into the sensor.\n2. Do not press the tamper switch.\n3. Hold the learn button down for 10 seconds until the LED turns red.\n4. Release the learn button and the sensor's green LED will breathe on and off continuously.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1827/1%20-%20Ecolink%20FireFighter%20Z-wave%20plus%20Manual%20(standard).pdf"
 	}
 }

package/config/devices/0x014a/flf-zwave5_r1.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Power up the device to enter inclusion mode. If the LED starts blinking continuously, the sensor was not successfully added. Make sure to remove the battery for 10 seconds if adding to a Z-Wave network fails.",
-		"exclusion": "1. Open the Flood Freeze case and remove the battery for 1 seconds.\n2. Replace the battery.",
-		"reset": "The Flood Freeze sensor factory defaults on network exclusion.",
+		"inclusion": "Power up the device. If the LED starts blinking continuously, the sensor was not successfully added. Remove the battery for 10 seconds if adding fails.",
+		"exclusion": "Open the case and remove the battery for 1 second. Replace the battery.",
+		"reset": "Remove the device from the Z-Wave network.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2929/51557%20%20Z-Wave%20FLF%20H214104%20ZWAVE_Ver04.pdf"
 	}
 }

package/config/devices/0x014a/gdzw7-eco.json

@@ -70,9 +70,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Locate and press the hub button on the device. The device will beep and blink green once when added.",
-		"exclusion": "Locate and press the hub button. Device's status indicator will blink red and beep three times when removed.",
-		"reset": "Hold the reset button down for ten seconds. The status indicator will blink red while the reset button is pressed and will go out after ten seconds. The device's status indicator will turn green when the reset operation is complete.",
+		"inclusion": "Press the hub button on the device. The device will beep and blink green once when added.",
+		"exclusion": "Press the hub button. The status indicator will blink red and beep three times when removed.",
+		"reset": "Hold the reset button down for ten seconds. The status indicator will blink red while the reset button is pressed and will go out after ten seconds. The status indicator will turn green when complete.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=cert_portal/certs/74/GarageDoorControllerUserManualV3.pdf"
 	}
 }

package/config/devices/0x014a/iszw7-eco.json

@@ -88,9 +88,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Press the Pair Button (the smaller of the two buttons). During inclusion mode, the Green LED will blink two times every three seconds. When inclusion times-out, the device will blink red and green.",
-		"exclusion": "Press the smaller of the two buttons (Add/Test). The device's red led will come on solid for 1 second when removed.",
-		"reset": "Hold the Pair button for 10 seconds. During the 10 seconds the green LED will flash, and after 10 seconds the red LED will come on solid for 1 second after factory reset.",
+		"inclusion": "Press the Pair Button (the smaller of the two buttons). During inclusion mode, the green LED will blink two times every three seconds. If inclusion times out, the device will blink red and green.",
+		"exclusion": "Press the smaller of the two buttons (Add/Test). The red LED will come on solid for 1 second when removed.",
+		"reset": "Hold the Pair button for 10 seconds. During the 10 seconds the green LED will flash, and after 10 seconds the red LED will come on solid for 1 second.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4000/ISZW7-ECO%20-%20Operation%20Manual%20v9.pdf"
 	}
 }

package/config/devices/0x014a/sc-zwave5.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Locate the power outlet desired to be used with the Z-Wave Plus Siren.\n2. Plug in the Z-Wave Siren and verify a single beep sound is heard.\n3. The LED on the front of the unit will turn off when included.",
-		"exclusion": "1. Unplug and re-plug in your Z-Wave Plus Siren.\n2. The device will play a long beep and the LED will begin to breathe when removed.",
+		"inclusion": "1. Plug in the Z-Wave Siren and verify a single beep sound is heard.\n2. The LED on the front of the unit will turn off when included.",
+		"exclusion": "Unplug and re-plug in your Z-Wave Plus Siren. The device will play a long beep and the LED will begin to breathe when removed.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1899/0%20-%20Ecolink%20Siren%20Z-Wave%20Plus%20Manual%20(standard).pdf"
 	}
 }

package/config/devices/0x014a/sdls2-zwave5.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED on the front of the unit will turn off when included.",
-		"exclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch.",
+		"inclusion": "Press the inclusion/exclusion button. The LED on the front will turn off when successfully included.",
+		"exclusion": "Press the inclusion/exclusion button.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2783/SDLS2-ZWAVE5_Prod_Rev02.pdf"
 	}
 }

package/config/devices/0x014a/stls2-zwave5.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED on the front of the unit will turn off if network inclusion is successful.",
-		"exclusion": "Press the inclusion / exclusion button on the Z-Wave Plus Smart Switch. The LED in front of the unit will blink steadily if the network exclusion is successful.",
+		"inclusion": "Press the inclusion/exclusion button. The LED on the front will turn off if successfully included.",
+		"exclusion": "Press the inclusion/exclusion button. The LED in front will blink steadily if successfully excluded.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2864/STLS2-ZWAVE5_Prod_Rev05.pdf"
 	}
 }

package/config/devices/0x014a/tstat-tbz500.json

@@ -703,8 +703,8 @@
 		}
 	},
 	"metadata": {
-		"inclusion": "1. Press and hold the FAN button on the Thermostat until the screen changes to the Menu screen.\n2. Press the UP button until ZWAVE is shown in the Status Display line then press Select.\n3. INSTALL should be shown on the status line.\n4. Press the 'Select' button to install.\n5. Press Done on the Thermostat to exit the ZWAVE screen.\n6. Press Done on the Thermostat again to exit the Menu screen.",
-		"exclusion": "1. Press and hold the FAN button for 3 seconds until the Menu screen is displayed.\n2. Press the UP arrow button to scroll to the 'ZWAVE' menu.\n3. Press 'Select' to select the ZWAVE screen.\n4. The display will show 'REMOVE' in the text line.\n5. Press 'Select' to perform the remove action.\n6. Press 'Done' to exit back to the thermostat screen.",
+		"inclusion": "1. Press and hold the FAN button until the Menu screen appears.\n2. Press the UP button until ZWAVE is shown, then press Select.\n3. INSTALL should be shown on the status line.\n4. Press Select to install.\n5. Press Done to exit the ZWAVE screen.\n6. Press Done again to exit the Menu screen.",
+		"exclusion": "1. Press and hold the FAN button for 3 seconds until the Menu screen is displayed.\n2. Press the UP arrow button to scroll to ZWAVE.\n3. Press Select to select the ZWAVE screen.\n4. REMOVE will be shown on the text line.\n5. Press Select to perform the remove action.\n6. Press Done to exit back to the thermostat screen.",
 		"reset": "1. Remove power from the TBZ500.\n2. Restore power to the TBZ500.\n3. When 'TBZ500' appears on the screen, hold down the MODE and FAN buttons at the same time.\n4. Release the buttons when RESET appears on the Status Line.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4093/TBZ500_manual_8_5x5_5_inch__SC_20210325.pdf"
 	}

package/config/devices/0x014d/dkc1000.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "In mobile app, tap \"RESET\" menu.\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "In the mobile app, tap RESET menu.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2024/DKC1000_Manual_Ver0.8%20-%20지웨이브인증용.pdf"
 	}
 }

package/config/devices/0x014d/dkc1001.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Tap \"RESET\" button in controller functions menu\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Tap RESET button in the controller functions menu.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2642/DK_DKC1001_Ver0.1.pdf"
 	}
 }

package/config/devices/0x014d/ibdk-01.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Please execute this reset procedure only when the primary controller is missing or inoperable.\n1. Open battery cover.\n2. Press and hold the button there\n3. LED is turned on after 5 seconds. Keep holding.\n4. LET starts blinking after 10 seconds.\n5. Release the button when the LED blinks",
+		"reset": "Open battery cover. Press and hold the button until the LED starts blinking after 10 seconds, then release.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3209/UVA01A_Manual_20190111.pdf"
 	}
 }

package/config/devices/0x014d/ss302.json

@@ -25,7 +25,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "In setting app, enter into following menu.\n\"About Enblink > Factory reset\"\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "In the setting app, enter the following menu: About Enblink > Factory reset.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2023/Manual.pdf"
 	}
 }

package/config/devices/0x014f/2gig-gc2.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "using UI, \"Reset Controller\" under Z-Wave toolbox (Advanced)",
+		"reset": "Using the UI, select Reset Controller under Z-Wave toolbox (Advanced).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3687/10022313%20A%20-%202GIG-GC2E%20CONTORL%20PANEL%20USER%20GUIDE_WEB-compressed.pdf"
 	}
 }

package/config/devices/0x014f/el-sc-100.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "1. Navigation to the Communication Device: ELAN Z-Wave Network page under Security, Climate, Lighting or\nInput/Output Tabs in Configurator 2. Management View: Network Management 3. Network Action: Reset 4.\nExecute (button to right of Network action)",
+		"reset": "1. Navigate to the 'Communication Device: ELAN Z-Wave Network' page under Security, Climate, Lighting or Input/Output Tabs in Configurator.\n2. Management View: Network Management.\n3. Network Action: Reset.\n4. Click Execute button to the right of Network action.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4083/10024525_Rev-B_Literature_Quick_Installation_Guide_System_Controller_Elan_EL-SC-300.pdf"
 	}
 }

package/config/devices/0x014f/f-adt-hub.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "In the SmartThings mobile app, go to the \"My Home\" section, \"Things\" tab, and tap \"Add a Thing.\" When the app shows \"Looking for devices...\" the panel is ready to include Z-Wave devices",
-		"exclusion": "In the SmartThings mobile app, go to the \"My Home\" section, \"Things\" tab, and tap the name of the device to show the device details. Then, tap the gear icon in the upper right and tap \"Remove.\"\n\nAlternatively, open the side menu (\"More\" in the iOS app) and tap on \"Hub is Online.\" Tap \"Z-Wave Utilities\" then \"General Device Exclusion\" and then the \"Remove\" button to confirm. The panel will enter Exclude Mode.",
-		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "In the SmartThings mobile app, go to the \"My Home\" section, \"Things\" tab, and tap \"Add a Thing.\"",
+		"exclusion": "In the SmartThings mobile app, go to the \"My Home\" section, \"Things\" tab, and tap the name of the device to show the device details. Then, tap the gear icon in the upper right and tap \"Remove.\"",
+		"reset": "Open the side menu and tap on \"Hub is Online.\" Tap \"Z-Wave Utilities\" then \"General Device Exclusion\" and then the \"Remove\" button to confirm.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2616/SmartThings.pdf"
 	}
 }

package/config/devices/0x014f/gd00z-6-7-8.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Place your Z-Wave Controller into Discovery or Include mode.\n\n2. Press and release the link button\non the GD00Z-8.-GC\n\n3. Confirm that the GD00Z-8-GC was recognized by your Z-Wave Controller",
-		"exclusion": "1. Place your Z-Wave Controller into Exclude mode.\n\n2. Press and release the link button\non the GD00Z-8.-GC\n\n3. Confirm that the GD00Z-8-GC was excluded by your Z-Wave Controller",
-		"reset": "Reset the GD00Z-8-ADT by pressing the LINK button 5 times. A quick beep followed by a longer beep will indicate the reset.\nReset should only be used in the case of a missing or inoperative primary controller",
+		"inclusion": "Press and release the link button.",
+		"exclusion": "Press and release the link button.",
+		"reset": "Press the link button 5 times. A quick beep followed by a longer beep will indicate success.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3710/10025383%20Rev-B%20-%20GD00Z-8%20GC_WEB.pdf"
 	}
 }

package/config/devices/0x014f/husbz.json

@@ -15,7 +15,6 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Not applicable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1363/SmartStick-QuickStart-Guide.pdf"
 	}
 }

package/config/devices/0x014f/lb60z-1.json

@@ -35,8 +35,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "With the controller in inclusion mode, turn the power to the light bulb socket ON.",
-		"exclusion": "Reset the bulb by using the wall switch to turn the power to the bulb ON while the controller is in exclusion mode. The Smart LED Light Bulb will flash twice to confirm the removal.",
+		"inclusion": "Turn the power to the light bulb socket ON.",
+		"exclusion": "Use the wall switch to turn the power to the bulb ON. The Smart LED Light Bulb will flash twice to confirm removal.",
 		"manual": "https://www.gocontrol.com/manuals/LB60Z-1-Install.pdf"
 	}
 }

package/config/devices/0x014f/ps15emz51.json

@@ -37,8 +37,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "With the controller in inclusion mode, tap the button on the face of the outlet. The LED will blink slowly when adding.",
-		"exclusion": "Remove the switch by tapping the button on the face of the outlet 2 times. The LED will begin blinking slowly for 10 seconds indicating that it has been removed.",
+		"inclusion": "Tap the button on the face of the outlet. The LED will blink slowly during addition.",
+		"exclusion": "Tap the button on the face of the outlet 2 times. The LED will begin blinking slowly for 10 seconds during removal.",
 		"manual": "https://www.gocontrol.com/manuals/ps15emz5-1_installation_guide_10008371c.pdf"
 	}
 }

package/config/devices/0x014f/wadwaz-1.json

@@ -24,8 +24,8 @@
 		"mapBasicSet": "auto"
 	},
 	"metadata": {
-		"inclusion": "With your Controller in Inclusion mode, depress the internal program switch for 1 second then release.",
-		"exclusion": "With your Controller in Exclusion mode, depress the internal program switch for 1 second then release.",
+		"inclusion": "Depress the internal program switch for 1 second then release.",
+		"exclusion": "Depress the internal program switch for 1 second then release.",
 		"manual": "https://www.gocontrol.com/manuals/WADWAZ-1-Install.pdf"
 	}
 }