@zwave-js/config 15.7.0 → 15.9.0

package/config/devices/0x0060/ac137.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the link button 3 times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the link button 3 times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "1. Press the link button 3 times within 1.5 seconds to put the unit into exclusion mode.\n\n2. Within 1 second of step 1, press the link button again and hold for 5 seconds.\n\n3. Node ID is excluded. The device reverts to factory default state.\n\n(This procedure should only be used when the controller is inoperable.)",
+		"inclusion": "Press the link button 3 times within 1.5 seconds.",
+		"exclusion": "Press the link button 3 times within 1.5 seconds.",
+		"reset": "Press the link button 3 times within 1.5 seconds. Within 1 second, press the link button again and hold for 5 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3363/AC137%20user%20manual.pdf"
 	}
 }

package/config/devices/0x0060/ac301.json

@@ -131,9 +131,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the P button 3 times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the P button 3 times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "1. Press the P button 3 times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press the button P again and hold for 5 seconds.\n3. Node ID is excluded. The device reverts to factory default state.",
+		"inclusion": "Press the P button 3 times within 1.5 seconds.",
+		"exclusion": "Press the P button 3 times within 1.5 seconds.",
+		"reset": "Press the P button 3 times within 1.5 seconds. Within 1 second, press the button P again and hold for 5 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4641/ZRT-106%20user%20manual.pdf"
 	},
 	"compat": {

package/config/devices/0x0060/ad146.json

@@ -87,9 +87,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "(This procedure should only be used when the primary controller is no longer operational.)\n1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press link key again and hold until LED is off (about 5 sec.).\n3. Node ID is excluded, and the unit is returned to the factory default state.",
+		"inclusion": "Press the link key 3 times within 1.5 seconds.",
+		"exclusion": "Press the link key 3 times within 1.5 seconds.",
+		"reset": "Press the link key 3 times within 1.5 seconds. Within 1 second, press link key again and hold until LED is off (about 5 seconds).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1057/Manual_AD146-0_20140728.pdf"
 	}
 }

package/config/devices/0x0060/ad147.json

@@ -65,9 +65,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode. (Please refer to the documentation for the location of the link key.)",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode. (Please refer to the documentation for the location of the link key.)",
-		"reset": "(This procedure should only be used when the network primary controller is inoperable.)\n1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press link key again and hold it until LED is off (about 5 seconds). (Please refer to the documentation for the location of the link key.)\n3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes",
+		"inclusion": "Press the link key 3 times within 1.5 seconds.",
+		"exclusion": "Press the link key 3 times within 1.5 seconds.",
+		"reset": "Press the link key 3 times within 1.5 seconds. Within 1 second, press link key again and hold it until LED is off (about 5 seconds).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1065/Manual_AD147_20140728.pdf"
 	}
 }

package/config/devices/0x0060/an184.json

@@ -107,9 +107,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press link key again and hold it until LED is off (about 5 seconds).\n3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 25 secs.\n(Use this procedure only in the event that the network primary controller is missing, or otherwise inoperable.)",
+		"inclusion": "Press the link key 3 times within 1.5 seconds.",
+		"exclusion": "Press the link key 3 times within 1.5 seconds.",
+		"reset": "Press the link key 3 times within 1.5 seconds. Within 1 second, press link key again and hold it until LED is off (about 5 seconds).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3126/AN184%201022-A501112743R.pdf"
 	}
 }

package/config/devices/0x0060/an186.json

@@ -26,9 +26,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into Inclusion mode.\n2. Press the On/Off knob 3 times within 1.5 seconds to put the unit into Inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into Exclusion mode.\n2. Press the On/Off knob 3 times within 1.5 seconds to put the unit into Exclusion mode.",
-		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable.\n1. Press the On/Off knob 3 times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press and hold the knob for 5 seconds.\n3. Node ID is deleted. The device reverts to factory default state.",
+		"inclusion": "Press the On/Off knob 3 times within 1.5 seconds.",
+		"exclusion": "Press the On/Off knob 3 times within 1.5 seconds.",
+		"reset": "Press the On/Off knob 3 times within 1.5 seconds. Within 1 second, press and hold the knob for 5 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2659/AN186_UserManual-20171026.pdf"
 	}
 }

package/config/devices/0x0060/an188.json

@@ -107,9 +107,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press link key again and hold it until LED is off (about 5 seconds).\n3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 25 secs.\n(Use this procedure only in the event that the network primary controller is missing, or otherwise inoperable.)",
+		"inclusion": "Press the link key 3 times within 1.5 seconds.",
+		"exclusion": "Press the link key 3 times within 1.5 seconds.",
+		"reset": "Press the link key 3 times within 1.5 seconds. Within 1 second, press link key again and hold it until LED is off (about 5 seconds).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3139/AN188.pdf"
 	}
 }

package/config/devices/0x0060/an196.json

@@ -106,9 +106,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1.Put the Z-Wave Controller into inclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "1. Press the link key three times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press link key again and hold until LED is off (about 5 seconds).\n3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes.",
+		"inclusion": "Press the link key 3 times within 1.5 seconds.",
+		"exclusion": "Press the link key 3 times within 1.5 seconds.",
+		"reset": "1. Press the link key 3 times within 1.5 seconds\n2. Within 1 second of step 1, press link key again and hold until LED is off (about 5 seconds)",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4640/AN-196%20user%20manual.pdf"
 	}
 }

package/config/devices/0x0060/eh403.json

@@ -46,9 +46,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Auto Inclusion\nThe unit supports Auto Inclusion feature where it will automatically enter Inclusion mode when first powered up after a factory reset.\n\n1. Prepare the Z-Wave controller.\n2. Plug the cable plug to the wall socket to power up the unit.\n3. The Link LED will start to blink slowly with 2-second on, 2-second off (for 2 minutes) which shows the unit does not be paired.\n4. Within 30 seconds, put the Z-Wave Controller into inclusion mode.\n5. The Inclusion process should be completed when the Link LED stops blinking.\n\nNote: If you are connecting this unit to a Z-Wave Controller that utilizes the S2 security protocol, you may be asked by your controller to enter a 5-digit Device Specific Key (DSK) that is unique to each unit. This can be found in one of two places:\n- on the QR code label on the back of the unit\n- on the insert card inside the packaging.\n\n6. Turn on the floodlight using the controller to check if the auto inclusion is working properly.\n\nManual Inclusion\n1. Prepare the Z-Wave controller.\n2. Press the tamper switch 3 times within 1.5 seconds to put the unit into inclusion mode",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the tamper switch 3 times within 1.5 seconds to put the unit into exclusion mode",
-		"reset": "1. Press the tamper switch 3 times within 1.5 seconds to put the unit into exclusion mode\n2. Within 1 second of step 1, press the tamper switch again and hold until LED is off (about 5 seconds).\n3. Node ID is excluded. The device reverts to factory default state and will be in auto-inclusion mode for 4 minutes.\n4. Please use this procedure only when the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press the tamper switch 3 times within 1.5 seconds",
+		"exclusion": "Press the tamper switch 3 times within 1.5 seconds",
+		"reset": "Press the tamper switch 3 times within 1.5 seconds, then within 1 second press the tamper switch again and hold until LED is off",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2890/EH403%20Manual_20180522修改-A501112670R.pdf"
 	},
 	"compat": {

package/config/devices/0x0060/se813.json

@@ -59,9 +59,9 @@
 		}
 	},
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the Link button 3 times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the Link button 3 times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "1. Press the Link button 3 times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press the Link button again and hold for 5 seconds.\n3. Node ID is excluded. The unit reverts to factory default state.\n(This procedure should only be used when the controller is missing or inoperable.)",
+		"inclusion": "Press the Link button 3 times within 1.5 seconds",
+		"exclusion": "Press the Link button 3 times within 1.5 seconds",
+		"reset": "1. Press the Link button 3 times within 1.5 seconds\n2. Within 1 second, press the Link button again and hold for 5 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3138/SE813%20user%20manual_1031.pdf"
 	}
 }

package/config/devices/0x0060/sm810.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the tamper switch 3 times within 1.5 seconds to put the unit into inclusion mode",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the tamper switch 3 times within 1.5 seconds to put the unit into exclusion mode",
-		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable.\n\n1. Press the tamper switch 3 times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press the tamper switch again and hold for 5 seconds.\n3. Node ID is excluded. The device reverts to factory default state",
+		"inclusion": "Press the tamper switch 3 times within 1.5 seconds",
+		"exclusion": "Press the tamper switch 3 times within 1.5 seconds",
+		"reset": "1. Press the tamper switch 3 times within 1.5 seconds\n2. Within 1 second, press the tamper switch again and hold for 5 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2985/SM810_UserManual_A501112654R01-20171120.pdf"
 	}
 }

package/config/devices/0x0060/sp815.json

@@ -47,9 +47,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Put the Z-Wave Controller into inclusion mode.\n2. Press the learn key 3 times within 1.5 seconds to put the unit into inclusion mode.",
-		"exclusion": "1. Put the Z-Wave Controller into exclusion mode.\n2. Press the learn key 3 times within 1.5 seconds to put the unit into exclusion mode.",
-		"reset": "1. Press the learn key 3 times within 1.5 seconds to put the unit into exclusion mode.\n2. Within 1 second of step 1, press the learn key again and hold for 5 seconds.\n3. Node ID is excluded. The device reverts to factory default state.\n(This procedure should only be used when the controller is inoperable.)",
+		"inclusion": "Press the learn key 3 times within 1.5 seconds",
+		"exclusion": "Press the learn key 3 times within 1.5 seconds",
+		"reset": "Press the learn key 3 times within 1.5 seconds, then within 1 second press the learn key again and hold for 5 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3366/SP815%20user%20manual_05102019-A501112752R01.pdf"
 	}
 }

package/config/devices/0x0063/14286_zw1001.json

@@ -21,9 +21,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the Program Button to add it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to\nremove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the manual/program button on the smart dimmer to\nremove it from the network",
-		"reset": "1. Press and hold the button for at least 3 seconds. The LED light\nwill blink 5 times to confirm.\nNOTE: This should only be used in the event your network's primary\ncontroller is missing or otherwise inoperable",
+		"inclusion": "Press and release the Program Button.",
+		"exclusion": "Press and release the Program Button.",
+		"reset": "Press and hold the button for at least 3 seconds. The LED light will blink 5 times to confirm.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2112/Binder1.pdf"
 	}
 }

package/config/devices/0x0063/14287_zw4002.json

@@ -45,9 +45,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press and release the top or bottom of the smart fan control switch (rocker) to include it in the network.\n3. Once your controller has confirmed the device has been included, refresh the Z-Wave network to optimize performance",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. \n2. Once the controller is ready to Exclude your device, press and release the top or bottom of the wireless smart switch (rocker) to exclude it from the network",
-		"reset": "1. Quickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the top or bottom of the rocker.",
+		"exclusion": "Press and release the top or bottom of the rocker.",
+		"reset": "1. Quickly press top button three times then immediately press the bottom button three times.\n2. The LED will flash ON/OFF 5 times when completed successfully.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2506/Binder2.pdf"
 	}
 }

package/config/devices/0x0063/14288_zw1002.json

@@ -21,9 +21,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the Program Button to add it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to\nremove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the manual/program button to remove it from the\nnetwork",
-		"reset": "Press the button 3 times, then press and hold the button for at least 3\nseconds. The LED will blink 5 times to confirm.\nNOTE: This should only be used in the event your network's primary\ncontroller is missing or otherwise inoperable",
+		"inclusion": "Press and release the Program Button.",
+		"exclusion": "Press and release the Program Button.",
+		"reset": "Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2236/14288%20QSG%20v1.pdf"
 	}
 }

package/config/devices/0x0063/14293_zw4009.json

@@ -21,9 +21,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to include a device to the Z-Wave network.\n2. Once the controller is ready to add your device,\npress toggle up and release to include it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device,\npress toggle up or down to exclude it from the network",
-		"reset": "1. Quickly press ON (up) button three (3) times then\nimmediately press the OFF (down) button three\n(3) times. \nNote: This should only be used in the event your\nnetwork's primary controller is missing or otherwise\ninoperable",
+		"inclusion": "Press toggle up and release.",
+		"exclusion": "Press toggle up or down.",
+		"reset": "Quickly press top button three times then immediately press the bottom button three times.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2055/Binder2.pdf"
 	}
 }

package/config/devices/0x0063/14297_zw1002.json

@@ -24,9 +24,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the Program Button to add it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to\nremove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the manual/program button to remove it from the\nnetwork",
-		"reset": "Press the button 3 times, then press and hold the button for at least 3\nseconds. The LED will blink 5 times to confirm.\nNOTE: This should only be used in the event your network's primary\ncontroller is missing or otherwise inoperable",
+		"inclusion": "Press and release the program button",
+		"exclusion": "Press and release the program button",
+		"reset": "Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2236/14288%20QSG%20v1.pdf"
 	}
 }

package/config/devices/0x0063/14298_zw4203.json

@@ -44,9 +44,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the top or bottom of the wireless smart switch (rocker)",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller\nto remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the top or bottom of the wireless smart switch (rocker)",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the button for at least 3 seconds\nwhile you plug the switch into a receptacle.\nNote: This should only be used in the event your network's\nprimary controller is missing or otherwise inoperable.",
+		"inclusion": "Press and release the top or bottom of the smart switch",
+		"exclusion": "Press and release the top or bottom of the smart switch",
+		"reset": "Unplug the switch from the receptacle. Press and hold the button for at least 3 seconds while you plug the switch into a receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3408/14298%20EnFrSp%20QSG%20v1.pdf"
 	}
 }

package/config/devices/0x0063/14307_zw3107.json

@@ -45,9 +45,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance.",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network.",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable.",
+		"inclusion": "Press and release the manual/program button on the smart dimmer",
+		"exclusion": "Press and release the manual/program button on the smart dimmer",
+		"reset": "Unplug the switch from the receptacle. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1401/14307%20QSG.pdf"
 	}
 }

package/config/devices/0x0063/14309_zw4106.json

@@ -21,9 +21,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance.",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network.",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable.",
+		"inclusion": "Press and release the manual/program button on the smart switch",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch from the receptacle. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1402/14309%20QSG.pdf"
 	}
 }

package/config/devices/0x0063/14311_zw4201.json

@@ -34,9 +34,9 @@
 		"mapBasicReport": false
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to\ninclude the smart switch to the Z-Wave network.\n2. Once the controller is ready to include your outdoor smart\nswitch, single press and release the manual/program\nbutton on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch\nhas been included, refresh the Z-Wave network to\noptimize performance",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to\nexclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and\nrelease the manual/program button on the smart switch to exclude\nit from the network",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug\nthe switch into a receptacle.\nNote: This should only be used in the event your network's\nprimary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart switch",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch from the receptacle. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1370/14311-1%20QSG.pdf"
 	}
 }

package/config/devices/0x0063/14313_zw1001.json

@@ -40,9 +40,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified\ncontroller to include a device to the Z-wave network.\n2. Once the controller is ready to include your device, press and\nrelease the Program Button to include it in the network.\n3. Once your controller has confirmed that the device has been\nincluded, refresh the Z-wave network to optimize performance",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to\nexclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and\nrelease the manual/program button on the smart dimmer to\nexclude it from the network",
-		"reset": "1. Press and hold the button for at least 3 seconds. The LED light\nwill blink 5 times to confirm.\nNote: This should only be used in the event your network's\nprimary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the program button",
+		"exclusion": "Press and release the program button",
+		"reset": "Press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1935/14313%20EnFrSp%20QSG%20V1%2003.pdf"
 	}
 }

package/config/devices/0x0063/14314_zw4002.json

@@ -40,9 +40,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Linking your device\n1. Follow the instructions for your Z-wave certified controller to include a device to\nthe Z-wave network.\n2. Once the controller is ready to include your device, press and release the top or\nbottom of the wireless smart switch(rocker) to include it in the network.\nNote: Your controller may need to be within 10 feet of the device to be included.\n3. Once your controller has confirmed that the device has been included, refresh the\nZ-wave network to optimize performance.\nPlease reference the controller's manual for instructions",
-		"exclusion": "Note: To exclude and reset the device, follow the instructions provided by your\nZ-Wave controller",
-		"reset": "Quickly press ON (Top) button three (3) times and then immediately press the OFF (Bottom) button three (3) times. The LED will flash ON/OFF 5 times when completed successfully. Use this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the top or bottom of the smart switch",
+		"exclusion": "Press and release the top or bottom of the smart switch",
+		"reset": "Quickly press the top button three times, then immediately press the bottom button three times. The LED will flash on/off 5 times when completed successfully",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1937/Binder1.pdf"
 	}
 }

package/config/devices/0x0063/14315_zw1002.json

@@ -21,9 +21,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and\nrelease the Program Button to add it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to\nremove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the manual/program button to remove it from the\nnetwork",
-		"reset": "Press the button 3 times, then press and hold the button for at least 3\nseconds. The LED will blink 5 times to confirm.\nNOTE: This should only be used in the event your network's primary\ncontroller is missing or otherwise inoperable",
+		"inclusion": "Press and release the program button",
+		"exclusion": "Press and release the program button",
+		"reset": "Press the button 3 times, then press and hold the button for at least 3 seconds. The LED will blink 5 times to confirm",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2236/14288%20QSG%20v1.pdf"
 	}
 }

package/config/devices/0x0063/14319_zw4003.json

@@ -40,9 +40,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network. \n2. Once the controller is ready to include your device, press up and release on the toggle to include it in the network. \n3. Once your controller has confirmed that the device has been included, refresh the Z-Wave network to optimize performance.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. \n2. Once the controller is ready to exclude your device, press up and release on the toggle to exclude it from the network.",
-		"reset": "1. Quickly press ON (up) 3 times then immediately press the OFF (Down) button 3 times. Note: This should only be used in the event your networks primary controller is missing or otherwise inoperable.",
+		"inclusion": "Press up and release on the toggle",
+		"exclusion": "Press up and release on the toggle",
+		"reset": "Quickly press the up button 3 times, then immediately press the down button 3 times",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2539/Binder1.pdf"
 	}
 }

package/config/devices/0x0063/14320_zw4003.json

@@ -38,9 +38,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include a device to the Z-Wave network.\n2. Once the controller is ready to include your device, press up and release the Toggle Switch to add it in the network.\n3. Once your controller has confirmed that the device has been included",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network.\n2. Once the controller is ready to Exclude your device, press and release the top or bottom of the wireless smart dimmer (rocker) to exclude it from the network",
-		"reset": "1. Quickly press ON (up) three (3) times then immediately press the OFF (down) button three (3) times. \n\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press up and release the toggle switch",
+		"exclusion": "Press and release the top or bottom of the smart dimmer",
+		"reset": "Quickly press the up button three times, then immediately press the down button three times",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2054/Binder2.pdf"
 	},
 	"compat": {

package/config/devices/0x0063/14322_zw3004.json

@@ -64,9 +64,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Adding your device to a Z-wave network:\n1. Follow the instructions for your Z-wave certified controller to include a device to\nthe Z-wave network.\n2. Once the controller is ready to include your device, press up and release on the\ntoggle to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh\nthe Z-wave network to optimize performance.\nPlease reference the controller's manual for instructions.\nNow you have complete control to turn your fixture ON/OFF or dim\naccording to groups, scenes, schedules and interactive automations\nprogrammed by your controller.\nIf your Z-wave certified controller features Remote Access, you can now control\nyour fixture from your mobile devices",
-		"exclusion": "To exclude and reset the device\n1. Follow the instructions for your Z-wave certified controller to exclude a device from\nthe Z-wave network.\n2. Once the controller is ready to Exclude your device, press up and release on the\ntoggle to exclude it from the network",
-		"reset": "To return your switch to factory defaults:\n1. Quickly press ON (Up) button three (3) times then immediately press the OFF\n(Down) button three (3) times. Note: This should only be used in the event your\nnetwork's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press up and release on the toggle",
+		"exclusion": "Press up and release on the toggle",
+		"reset": "Quickly press the top button three times, then immediately press the bottom button three times",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2123/Binder1.pdf"
 	}
 }

package/config/devices/0x0063/14325_zw4203.json

@@ -44,9 +44,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add the smart switch to the Z-Wave network.\n2. Once the controller is ready to add your outdoor smart switch, press and release the manual/program button on the smart switch.\n3. The controller's app will indicate if it has discovered the switch. If prompted by the controller to enter the S2 security code, refer to the QR code/security number on the side of the box or the QR code label on the product (see Figure 1). Enter the 5-digit code",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the manual/program button on the smart switch to remove it from the network",
-		"reset": "1. If plugged in, unplug the switch from the receptacle.\n2. Press and hold the manual/program button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used if your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart switch",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch from the receptacle. Press and hold the manual/program button for at least 3 seconds while you plug the switch into a receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3407/14325%20EnFrSp%20QSG%20v1%20(002).pdf"
 	}
 }

package/config/devices/0x0063/14326_zw3006.json

@@ -68,9 +68,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Adding your device to a Z-wave network\n1. Follow the instructions for your Z-wave certified controller to include a device to the Z-wave\nnetwork.\n2. Once the controller is ready to include your device, press and release the top or bottom of the\nwireless smart switch(rocker) to include it in the network.\n3. Once your controller has confirmed that the device has been included, refresh the Z-wave network\nto optimize performance.\nPlease reference the controller's manual for instructions.\nNow you have complete control to turn your fixture ON/OFFaccording to groups, scenes, schedules\nand interactive automations programmed by your controller.\nIf your Z-wave certified controller features Remote Access, you can now control your fixture from\nyour mobile devices",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave\nnetwork.\n2. Once the controller is ready to Exclude your device, press and release the top or bottom of the\nwireless smart dimmer (rocker) to exclude it from the network",
-		"reset": "To return your switch to factory defaults:\nQuickly press ON (Top) button three (3) times then immediately press the OFF (Bottom) button three\n(3) times. The LED will flash ON/OFF 5 times when completed successfully.\nNote: This should only be used in the event your networks' primary controller is\nmissing or otherwise inoperable",
+		"inclusion": "Press and release the top or bottom of the smart switch",
+		"exclusion": "Press and release the top or bottom of the smart switch",
+		"reset": "Quickly press the top button three times, then immediately press the bottom button three times. The LED will flash on/off 5 times when completed successfully",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2041/Binder1.pdf"
 	}
 }

package/config/devices/0x0063/24770_zw4006.json

@@ -57,9 +57,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to include the smart switch to the\nZ-Wave network.\n2. Once the controller is ready to include your smart\nswitch, press and release the top or bottom button\non the smart switch to include it in the network",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to exclude a device from the Z-Wave\nnetwork.\n2. Once the controller is ready to exclude your device,\npress and release the top or bottom button on the\nsmart switch to exclude it from the network",
-		"reset": "Press and release the top button ten times.\nNote: This should only be used in the event your\nnetwork's primary controller is missing or otherwise\ninoperable",
+		"inclusion": "Press and release the top or bottom button on the smart switch",
+		"exclusion": "Press and release the top or bottom button on the smart switch",
+		"reset": "Press and release the top button 10 times",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2126/24770%20EnFrSp%20QSG%20v1.3.pdf"
 	}
 }

package/config/devices/0x0063/28166_zw3104.json

@@ -69,9 +69,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart dimmer",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch, then press and hold the top button for at least 3 seconds while plugging the switch back into the receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2036/28166%20EnFrSp%20QSG%20v2.2.pdf"
 	}
 }

package/config/devices/0x0063/28170_zw3105.json

@@ -64,9 +64,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart dimmer",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch, then press and hold the top button for at least 3 seconds while plugging the switch back into the receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2172/Binder1.pdf"
 	}
 }

package/config/devices/0x0063/28171_zw3105.json

@@ -45,9 +45,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart dimmer to include it in the network",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart dimmer",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch, then press and hold the top button for at least 3 seconds while plugging the switch back into the receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1441/28171-1%20EnFrSp%20QSG.pdf"
 	}
 }

package/config/devices/0x0063/28172_zw4104.json

@@ -40,9 +40,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart switch",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch, then press and hold the top button for at least 3 seconds while plugging the switch back into the receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2973/28172%20binder.pdf"
 	}
 }

package/config/devices/0x0063/28173_zw4104.json

@@ -40,9 +40,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to include the device to the Z-wave network.\n2. Once the controller is ready to include your smart switch, single press and release the manual/program button on the smart switch to include it in the network.\n3. Once your controller has confirmed that the smart switch has been included, refresh the Z-wave network to optimize performance",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to exclude a device from the Z-wave network.\n2. Once the controller is ready to Exclude your device, press and release the manual/program button on the smart switch to exclude it from the network",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you plug the switch into a receptacle.\nNote: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart switch",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch, then press and hold the top button for at least 3 seconds while plugging the switch back into the receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2973/28172%20binder.pdf"
 	}
 }

package/config/devices/0x0063/28176_zw4105.json

@@ -40,9 +40,9 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-wave certified controller to\nadd the device to the Z-wave network.\n2. Once the controller is ready to add your smart switch,\nsingle press and release the manual/program button on the\nsmart switch to add it in the network.\n3. Once your controller has confirmed that the smart switch\nhas been added, refresh the Z-wave network to optimize\nperformance.",
-		"exclusion": "1. Follow the instructions for your Z-wave certified controller to\nremove a device from the Z-wave network.\n2. Once the controller is ready to remove your device, press and\nrelease the manual/program button on the smart switch to\nremove it from the network",
-		"reset": "1. If plugged in, unplug the Switch from the receptacle.\n2. Press and hold the top button for at least 3 seconds while you\nplug the switch into a receptacle.\nNote: This should only be used in the event your network's\nprimary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the manual/program button on the smart switch",
+		"exclusion": "Press and release the manual/program button on the smart switch",
+		"reset": "Unplug the switch, then press and hold the top button for at least 3 seconds while plugging the switch back into the receptacle",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2191/Binder2.pdf"
 	}
 }

package/config/devices/0x0063/32562_zw6301.json

@@ -21,9 +21,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to include the device to the Z-Wave network.\n2. Once the controller is ready to include your Hinge Pin Smart Door Sensor press and release the manual/program button on the smart switch to include it in the network.",
-		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to exclude a device from the Z-Wave network. \n2. Once the controller is ready to exclude your device, press and release the manual/program button on the Hinge Pin Smart Door Sensor to exclude it from the network.",
-		"reset": "You may wish to reset all of your Hinge Pin Smart Door Sensor's settings to their factory defaults. To do this, press the program button 10 times within 6 seconds. If your Door Sensor has been successfully reset, its LED light will blink for 3 seconds. \n\nThis should only be used in the event your network's primary controller is missing or otherwise inoperable",
+		"inclusion": "Press and release the program button on the device.",
+		"exclusion": "Press and release the program button on the device.",
+		"reset": "Press the program button 10 times within 6 seconds. The LED will blink for 3 seconds if successful.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1795/32562-1%20EnFrSp%20QSG%20-%20Combined.pdf"
 	}
 }