@overvis/hmi-workspace-ui 0.0.0-stage → 0.1.0

package/dist/src/i18n/catalogs/en/fleet.d.ts

@@ -0,0 +1,247 @@
+declare const _default: {
+    readonly fleet_active_alarms: "Active alarms ({count})";
+    readonly fleet_active_count: "{count}/{total} active";
+    readonly fleet_add_alarm: "Add alarm";
+    readonly fleet_add_control: "Add control";
+    readonly fleet_add_reading: "Add reading";
+    readonly fleet_add_step: "Add step";
+    readonly fleet_add_zone: "Add zone";
+    readonly fleet_alarm_inactive: "No";
+    readonly fleet_alarm_unavailable: "Alarm data unavailable";
+    readonly fleet_alarms: "Alarms";
+    readonly fleet_alarms_hint: "Shows an alarm while the bound parameter meets the condition.";
+    readonly fleet_all_statuses: "All statuses";
+    readonly fleet_all_zones: "All zones";
+    readonly fleet_board: "Board settings";
+    readonly fleet_cancel: "Cancel";
+    readonly fleet_cards: "Compact visuals";
+    readonly fleet_category: "Control purpose";
+    readonly fleet_category_mode: "Operating mode";
+    readonly fleet_category_other: "Other";
+    readonly fleet_category_reset: "Acknowledge / reset";
+    readonly fleet_category_start: "Start";
+    readonly fleet_category_stop: "Stop";
+    readonly fleet_clear_selection: "Clear";
+    readonly fleet_cluster_label: "Sites: {count}. Most urgent: {status}";
+    readonly fleet_columns: "Summary readings";
+    readonly fleet_command: "Command sequence";
+    readonly fleet_command_done: "{name}: writes acknowledged. Check the live equipment state for the result.";
+    readonly fleet_command_failed: "Execution stopped. A write failed or its result is unknown. Check the live equipment state before sending another command.";
+    readonly fleet_command_hint: "Steps run in order while this page remains open. Execution stops at the first failed or unconfirmed write. Verify equipment state before sending another command.";
+    readonly fleet_condition: "Active condition";
+    readonly fleet_confirm: "Confirm operation";
+    readonly fleet_conflict: "This configuration changed while you were editing. Close and reopen this form to use the latest version.";
+    readonly fleet_conflict_retry: "The configuration changed elsewhere. The latest version is shown now; make the change again.";
+    readonly fleet_controls: "Controls";
+    readonly fleet_controls_mode: "Mode";
+    readonly fleet_controls_operation: "Operation";
+    readonly fleet_controls_actions: "Actions";
+    readonly fleet_controls_hint: "Lets operators change a setpoint or run an ordered sequence of writes.";
+    readonly fleet_copy_name: "{name} (copy)";
+    readonly fleet_current: "Current value";
+    readonly fleet_date: "YYYY-MM-DD HH:mm:ss";
+    readonly fleet_date_hint: "Enter the date and time as YYYY-MM-DD HH:mm:ss in your local timezone.";
+    readonly fleet_date_invalid: "Enter a valid local date and time: YYYY-MM-DD HH:mm:ss.";
+    readonly fleet_delete: "Delete";
+    readonly fleet_delete_confirm: "Delete this item? Its configuration will be removed. Equipment parameter values will not change.";
+    readonly fleet_delete_named: "Delete {name}";
+    readonly fleet_drawing_limit: "This schematic exceeds the drawing capacity. Reduce its complexity before saving.";
+    readonly fleet_duplicate: "Duplicate";
+    readonly fleet_duplicate_all_found: "Every binding has a matching parameter.";
+    readonly fleet_duplicate_branch_missing: "{path}: bindings without a unique match will be left out ({count}):";
+    readonly fleet_duplicate_choose: "Choose a branch";
+    readonly fleet_duplicate_complete_branches: "Branches where every binding has a matching parameter: {count}.";
+    readonly fleet_duplicate_copies: "Copies: {count}. Each is named after its branch:";
+    readonly fleet_duplicate_hint: "Copies the site’s equipment, readings, alarms and controls. Each binding is matched to the parameter with the same relative path in the chosen branch. The map position is not copied.";
+    readonly fleet_duplicate_id: "Identifiers overlap with existing equipment or drawings. Reload the dashboard and recreate the item with new identifiers.";
+    readonly fleet_duplicate_missing: "Bindings without a unique match will be left out ({count}):";
+    readonly fleet_duplicate_no_bindings: "This site has no parameter bindings yet, so the copy contains only its structure.";
+    readonly fleet_duplicate_search: "Search branches";
+    readonly fleet_duplicate_site: "Duplicate site";
+    readonly fleet_duplicate_source: "Current bindings are in {path}.";
+    readonly fleet_duplicate_target: "Bind the copy to branch";
+    readonly fleet_duplicate_target_required: "Choose the branch that holds the new site’s parameters.";
+    readonly fleet_duplicate_targets: "Bind copies to branches";
+    readonly fleet_edit: "Edit";
+    readonly fleet_edit_maintenance: "Edit maintenance due date";
+    readonly fleet_edit_verification: "Edit verification due date";
+    readonly fleet_execute: "Execute";
+    readonly fleet_geo_invalid: "Choose a geo position parameter.";
+    readonly fleet_group: "Group by zone";
+    readonly fleet_history: "History / report";
+    readonly fleet_history_limit: "History includes {count} parameters. Quick reports support up to {limit}.";
+    readonly fleet_invalid_configuration: "These settings cannot be saved. Check the values and try again.";
+    readonly fleet_invalid_drawing: "The generated drawing is invalid. Check its elements and parameter bindings before saving again. Your saved drawing has not changed.";
+    readonly fleet_labeled: "{name}:";
+    readonly fleet_last_data: "Last data {time}";
+    readonly fleet_maintenance: "Maintenance due";
+    readonly fleet_maintenance_invalid: "Choose a writable date and time parameter.";
+    readonly fleet_maintenance_overdue: "Maintenance overdue ({count})";
+    readonly fleet_map_legend: "Map legend";
+    readonly fleet_map_unavailable: "Map unavailable. Sites are still listed below.";
+    readonly fleet_marker_title: "{name} – {status}";
+    readonly fleet_more_alarms: "Active alarms not shown: {count}";
+    readonly fleet_no_active_alarms: "No active alarms";
+    readonly fleet_alarms_unknown: "Some alarm states are unavailable";
+    readonly fleet_move_down: "Move {name} down";
+    readonly fleet_move_earlier: "Earlier";
+    readonly fleet_move_later: "Later";
+    readonly fleet_move_up: "Move {name} up";
+    readonly fleet_name: "Name";
+    readonly fleet_no_coordinates: "No sites with coordinates in this selection.";
+    readonly fleet_no_results: "No sites match these filters.";
+    readonly fleet_not_found: "Page not found.";
+    readonly fleet_open: "Open";
+    readonly fleet_operator: "Comparison";
+    readonly fleet_operator_eq: "Equals";
+    readonly fleet_operator_gt: "Greater than";
+    readonly fleet_operator_gte: "Greater than or equal";
+    readonly fleet_operator_lt: "Less than";
+    readonly fleet_operator_lte: "Less than or equal";
+    readonly fleet_operator_ne: "Does not equal";
+    readonly fleet_overdue: "Overdue";
+    readonly fleet_parameter: "Parameter";
+    readonly fleet_parameter_read_only: "This parameter is read-only. Choose a writable parameter.";
+    readonly fleet_parameter_unavailable: "Could not check this parameter. Try saving again.";
+    readonly fleet_readings: "Readings";
+    readonly fleet_readings_hint: "Shows a live parameter value with its unit and summary category.";
+    readonly fleet_remove: "Remove";
+    readonly fleet_remove_zone: "Remove zone {name}";
+    readonly fleet_reorder_list: "Change order: {list}";
+    readonly fleet_representation: "Site display";
+    readonly fleet_retry: "Retry";
+    readonly fleet_role: "Reading category";
+    readonly fleet_save: "Save";
+    readonly fleet_saving: "Saving…";
+    readonly fleet_search: "Search";
+    readonly fleet_select: "Select";
+    readonly fleet_select_all_matching: "Select all matching ({count})";
+    readonly fleet_select_shown: "Select all shown";
+    readonly fleet_select_site: "Select {name}";
+    readonly fleet_selected_count: "{count} selected";
+    readonly fleet_selection: "Selection";
+    readonly fleet_selection_done: "Done";
+    readonly fleet_setpoint: "Setpoint";
+    readonly fleet_severity: "Severity";
+    readonly fleet_severity_critical: "Critical";
+    readonly fleet_severity_warning: "Warning";
+    readonly fleet_show_in_summary: "Show on the fleet overview when its category is a summary column";
+    readonly fleet_show_more: "Show more ({count})";
+    readonly fleet_sort: "Sort";
+    readonly fleet_sort_configured: "Configured order";
+    readonly fleet_sort_name: "Name";
+    readonly fleet_sort_status: "Most urgent first";
+    readonly fleet_stale_position: "Last known position";
+    readonly fleet_status: "Status";
+    readonly fleet_status_active: "Active";
+    readonly fleet_status_alarm: "Alarm";
+    readonly fleet_status_inactive: "Inactive";
+    readonly fleet_status_loading: "Loading…";
+    readonly fleet_status_normal: "Normal";
+    readonly fleet_status_offline: "No data";
+    readonly fleet_status_unconfigured: "Not configured";
+    readonly fleet_status_unknown: "Unknown";
+    readonly fleet_status_warning: "Warning";
+    readonly fleet_step: "Step";
+    readonly fleet_step_number: "Step {number}";
+    readonly fleet_steps: "Ordered command steps";
+    readonly fleet_steps_required: "Add at least one step.";
+    readonly fleet_table: "Table";
+    readonly fleet_unassigned: "No zone";
+    readonly fleet_unavailable: "Data unavailable";
+    readonly fleet_unit: "Unit";
+    readonly fleet_value: "Value";
+    readonly fleet_value_hint: "Enter or choose a valid value.";
+    readonly fleet_value_invalid: "Enter a valid value.";
+    readonly fleet_verification: "Verification due";
+    readonly fleet_verification_overdue: "Verification overdue ({count})";
+    readonly fleet_zone: "Zone";
+    readonly fleet_zone_name: "Zone {number} name";
+    readonly fleet_zones: "Zones";
+    readonly fleet_inventory_unavailable: "Could not load the parameter tree, so bindings cannot be matched. Retry before duplicating.";
+    readonly fleet_duplicate_not_found: "None of this site's bound parameters exist in the workspace, so the copy will leave these out:";
+    readonly fleet_counter_integer: "Integer pulse counters have no period totals. Choose a calculated parameter that scales the pulses to the metered quantity, such as kWh.";
+    readonly fleet_counter_invalid: "Choose a numeric counter parameter.";
+    readonly fleet_numeric_invalid: "Choose a numeric parameter. Scale an integer reading with a calc parameter.";
+    readonly fleet_counter_background_off: "{name} has background readings off, so its history is recorded only while someone views it.";
+    readonly fleet_counter_unit_differs: "The unit ({unit}) differs from the parent's ({parent}), so no share of the parent is shown.";
+    readonly fleet_counter_totals_failed: "Period totals can't be loaded right now.";
+    readonly fleet_default_period: "Default period";
+    readonly fleet_time_zone: "Time zone for calendar periods";
+    readonly fleet_time_zone_workspace: "Workspace time zone";
+    readonly fleet_time_zone_browser: "Each viewer's own time zone";
+    readonly fleet_time_zone_zone: "A specific time zone";
+    readonly fleet_time_zone_name: "Time zone";
+    readonly fleet_time_zone_hint: "An IANA name such as Europe/Warsaw.";
+    readonly fleet_time_zone_invalid: "Enter an IANA time zone such as Europe/Warsaw.";
+    readonly fleet_counter_bars_failed: "The chart couldn't load.";
+    readonly fleet_counter_average: "Average {value}";
+    readonly fleet_counter_no_data: "No data";
+    readonly fleet_counter_partial_hint: "Readings cover only part of this period.";
+    readonly fleet_counter_period: "Period";
+    readonly fleet_counter_period_24h: "Last 24 hours";
+    readonly fleet_counter_period_7d: "Last 7 days";
+    readonly fleet_counter_period_30d: "Last 30 days";
+    readonly fleet_counter_period_today: "Today";
+    readonly fleet_counter_period_yesterday: "Yesterday";
+    readonly fleet_counter_period_this_week: "This week";
+    readonly fleet_counter_period_last_week: "Last week";
+    readonly fleet_counter_period_this_month: "This month";
+    readonly fleet_counter_period_last_month: "Last month";
+    readonly fleet_counter_reset: "Counter reset";
+    readonly fleet_counter_reset_hint: "The counter dropped during this period, so no total is shown.";
+    readonly fleet_counter_since: "Since {time}";
+    readonly fleet_counter_until: "Until {time}";
+    readonly fleet_counter_vs_24h: "vs previous 24 hours";
+    readonly fleet_counter_vs_7d: "vs previous 7 days";
+    readonly fleet_counter_vs_30d: "vs previous 30 days";
+    readonly fleet_counter_vs_today: "vs same time yesterday";
+    readonly fleet_counter_vs_yesterday: "vs the day before";
+    readonly fleet_counter_vs_this_week: "vs same time last week";
+    readonly fleet_counter_vs_last_week: "vs the week before";
+    readonly fleet_counter_vs_this_month: "vs same time last month";
+    readonly fleet_counter_vs_last_month: "vs the month before";
+    readonly fleet_coordinate_missing: "Enter both coordinates, or leave both empty.";
+    readonly fleet_coordinates_hint: "Leave both coordinates empty to keep this site off the map.";
+    readonly fleet_latitude: "Latitude";
+    readonly fleet_latitude_invalid: "Enter a latitude from -90 to 90.";
+    readonly fleet_longitude: "Longitude";
+    readonly fleet_longitude_invalid: "Enter a longitude from -180 to 180.";
+    readonly fleet_map_pick: "Location on the map";
+    readonly fleet_map_pick_unavailable: "Map unavailable. Enter the coordinates above.";
+    readonly fleet_position_coordinates: "Fixed coordinates";
+    readonly fleet_position_parameter: "Geo position parameter";
+    readonly fleet_position_parameter_hint: "The site follows the live value of this parameter, for mobile or relocatable units. It stays off the map while the value is unavailable.";
+    readonly fleet_position_source: "Map position";
+    readonly fleet_mode_automatic: "Automatic";
+    readonly fleet_mode_manual: "Manual";
+    readonly fleet_mode_local: "Local";
+    readonly fleet_mode_unknown: "Mode unknown";
+    readonly fleet_local_blocked: "Local control is on: remote commands have no effect.";
+    readonly fleet_local_unknown: "The local selector is unknown: commands are sent, but have no effect under local control.";
+    readonly fleet_command_changed: "This command was changed in setup. Close it and open it again.";
+    readonly fleet_automatic_warning: "Automatic mode: the controller may switch it back at its next scheduled change.";
+    readonly fleet_unknown_mode_warning: "The mode is unknown: in automatic mode, the controller may switch it back at its next scheduled change.";
+    readonly fleet_group_automatic_warning: "In automatic mode: {count}. Their controllers may switch them back at their next scheduled change.";
+    readonly fleet_group_unknown_mode_warning: "Mode unknown: {count}. If they are in automatic mode, their controllers may switch them back.";
+    readonly fleet_group_limit: "At most {count} can be operated at once.";
+    readonly fleet_group_nothing: "Nothing selected can be operated from here.";
+    readonly fleet_group_failed: "The commands could not be sent. Check the connection and try again.";
+    readonly fleet_group_changed: "Their state changed since this list was made. Update the list and review it before confirming.";
+    readonly fleet_group_refresh: "Update list";
+    readonly fleet_left_out: "Left out: {count}";
+    readonly fleet_left_out_no_command: "no command bound";
+    readonly fleet_left_out_several_steps: "the command has several steps; operate it from its own page";
+    readonly fleet_left_out_local: "local control is on";
+    readonly fleet_left_out_conflict: "another selected item writes a different value to the same command parameter";
+    readonly fleet_no_current_data: "No current data";
+    readonly fleet_results_title: "{action}: results";
+    readonly fleet_results_hint: "Nothing is retried or reversed automatically. Select the failed ones to try again.";
+    readonly fleet_result_done: "Done";
+    readonly fleet_result_no_response: "No response";
+    readonly fleet_result_failed: "Failed";
+    readonly fleet_now: "Now: {state}";
+    readonly fleet_select_failed: "Select failed ({count})";
+    readonly fleet_dismiss: "Dismiss";
+};
+export default _default;

package/dist/src/i18n/catalogs/en/formula.d.ts

@@ -0,0 +1,35 @@
+declare const _default: {
+    readonly formula_problem_at: "{problem} (character {position})";
+    readonly formula_type_number: "number";
+    readonly formula_type_boolean: "true/false";
+    readonly formula_type_string: "text";
+    readonly formula_type_instant: "point in time";
+    readonly formula_type_duration: "duration";
+    readonly formula_type_time_of_day: "time of day";
+    readonly formula_count_at_least: "at least {min}";
+    readonly formula_diagnostic_empty_formula: "Enter a formula.";
+    readonly formula_diagnostic_unexpected_character: "The character {char} cannot be used here.";
+    readonly formula_diagnostic_unterminated_string: "Close the quoted text.";
+    readonly formula_diagnostic_invalid_number: "{text} is not a number or a duration.";
+    readonly formula_diagnostic_invalid_time_of_day: "{text} is not a time of day. Use HH:MM or HH:MM:SS.";
+    readonly formula_diagnostic_unexpected_token: "{token} cannot be used here.";
+    readonly formula_diagnostic_unexpected_end: "The formula ends too early.";
+    readonly formula_diagnostic_missing_closing_parenthesis: "Close the parenthesis.";
+    readonly formula_diagnostic_chained_comparison: "Comparisons cannot be chained. Combine them with and.";
+    readonly formula_diagnostic_too_deep: "The formula nests deeper than {max} levels.";
+    readonly formula_diagnostic_unknown_name: "Unknown name {name}.";
+    readonly formula_diagnostic_unknown_function: "Unknown function {name}.";
+    readonly formula_diagnostic_not_a_function: "{name} is not a function.";
+    readonly formula_diagnostic_placeholder_out_of_range: "#{index} is not one of the inputs #1 to #{count}.";
+    readonly formula_diagnostic_placeholder_unavailable: "Inputs such as #{index} cannot be used here.";
+    readonly formula_diagnostic_argument_count: "Wrong number of values for {name}(): {actual} given, {count} expected.";
+    readonly formula_diagnostic_argument_types: "{name}() cannot take these types: {types}.";
+    readonly formula_diagnostic_operand_types: "{operator} cannot be used with these types: {types}.";
+    readonly formula_diagnostic_result_type: "Result type: {actual}. Expected: {expected}.";
+    readonly formula_diagnostic_time_unavailable: "{name}() cannot be used in this formula.";
+    readonly formula_diagnostic_division_by_zero: "Division by zero.";
+    readonly formula_diagnostic_not_finite: "The result is not a finite number.";
+    readonly formula_diagnostic_invalid_argument: "Invalid value for {name}().";
+    readonly formula_diagnostic_location_required: "{name}() needs the workspace location.";
+};
+export default _default;