@overvis/hmi-workspace-ui 0.0.0-stage → 0.1.0

package/dist/src/i18n/catalogs/en/action.d.ts

@@ -0,0 +1,14 @@
+declare const _default: {
+    readonly action_saving: "Saving…";
+    readonly action_creating: "Creating…";
+    readonly action_deleting: "Deleting…";
+    readonly action_uploading: "Uploading…";
+    readonly action_cancel: "Cancel";
+    readonly action_previous: "Previous";
+    readonly action_next: "Next";
+    readonly action_skip: "Skip";
+    readonly action_submit: "Submit";
+    readonly action_close: "Close";
+    readonly action_save: "Save";
+};
+export default _default;

package/dist/src/i18n/catalogs/en/alarm.d.ts

@@ -0,0 +1,79 @@
+declare const _default: {
+    readonly alarm_nav: "Alarms";
+    readonly alarm_nav_waiting: "Alarms waiting for acknowledgement: {count}";
+    readonly alarm_page_title: "Alarms";
+    readonly alarm_page_description: "Active alarms of this workspace and their history. Operators acknowledge and shelve them.";
+    readonly alarm_tab_active: "Active";
+    readonly alarm_tab_active_count: "Active · {count}";
+    readonly alarm_tab_history: "History";
+    readonly alarm_active_title: "Active alarms";
+    readonly alarm_none_active: "No active alarms.";
+    readonly alarm_feed_failed: "Alarms could not be loaded. Retrying…";
+    readonly alarm_untitled: "Alarm";
+    readonly alarm_unavailable_title: "Alarm inputs unavailable: {name}";
+    readonly alarm_unavailable_body: "The values this alarm rule reads have been unknown for too long, so the alarm can neither be raised nor cleared. Check the devices and their connection.";
+    readonly alarm_needs_acknowledgement: "Not acknowledged";
+    readonly alarm_shelved: "Shelved";
+    readonly alarm_raised_at: "Raised {time}";
+    readonly alarm_state_active: "Active";
+    readonly alarm_state_cleared: "Cleared {time}";
+    readonly alarm_state_acknowledged: "Acknowledged {time}";
+    readonly alarm_state_acknowledged_by: "Acknowledged by {name}, {time}";
+    readonly alarm_state_shelved: "Shelved until {time}";
+    readonly alarm_state_shelved_by: "Shelved by {name} until {time}";
+    readonly alarm_acknowledge: "Acknowledge";
+    readonly alarm_acknowledging: "Acknowledging…";
+    readonly alarm_acknowledge_title: "Acknowledge alarm";
+    readonly alarm_acknowledge_comment: "Comment";
+    readonly alarm_acknowledge_comment_placeholder: "Optional: what was done";
+    readonly alarm_shelve: "Shelve";
+    readonly alarm_shelving: "Shelving…";
+    readonly alarm_shelve_title: "Shelve alarm";
+    readonly alarm_shelve_explanation: "A shelved alarm sends no notifications and plays no sound until the shelf ends. It stays in the list.";
+    readonly alarm_shelve_duration: "For";
+    readonly alarm_shelve_15m: "15 min";
+    readonly alarm_shelve_1h: "1 hour";
+    readonly alarm_shelve_8h: "8 hours";
+    readonly alarm_shelve_24h: "24 hours";
+    readonly alarm_shelve_7d: "7 days";
+    readonly alarm_shelve_reason: "Reason";
+    readonly alarm_shelve_reason_placeholder: "Why it is shelved, for example maintenance";
+    readonly alarm_unshelve: "End shelf";
+    readonly alarm_unshelving: "Ending…";
+    readonly alarm_unshelve_title: "End shelf now?";
+    readonly alarm_unshelve_explanation: "If the alarm is still active and not acknowledged, its notifications are sent at once.";
+    readonly alarm_history_title: "Alarm history";
+    readonly alarm_history_filters: "History filters";
+    readonly alarm_history_severity: "Severity";
+    readonly alarm_history_all_severities: "All severities";
+    readonly alarm_history_kind: "Event";
+    readonly alarm_history_all_kinds: "All events";
+    readonly alarm_history_source: "Source";
+    readonly alarm_history_all_sources: "All sources";
+    readonly alarm_history_alarm_rules: "Alarm rules";
+    readonly alarm_history_automations: "Automations";
+    readonly alarm_history_period: "Period";
+    readonly alarm_history_one_alarm: "Show all alarms";
+    readonly alarm_history_of_alarm: "History";
+    readonly alarm_history_clear_filters: "Clear filters";
+    readonly alarm_history_delay: "A change can take a moment to appear in the history.";
+    readonly alarm_history_empty: "No alarm events match these filters.";
+    readonly alarm_history_more: "Load older";
+    readonly alarm_event_raised: "Raised";
+    readonly alarm_event_cleared: "Cleared";
+    readonly alarm_event_acknowledged: "Acknowledged";
+    readonly alarm_event_shelved: "Shelved";
+    readonly alarm_event_unshelved: "Shelf ended";
+    readonly alarm_event_removed: "Removed";
+    readonly alarm_event_removed_detail: "The rule or automation that raised it was disabled, deleted or no longer raises it.";
+    readonly alarm_event_shelved_until: "until {time}";
+    readonly alarm_sound_toggle: "Alarm sound in this browser";
+    readonly alarm_sound_description: "Off unless you turn it on. Plays in one open tab for warning and urgent alarms until they are acknowledged, shelved or silenced.";
+    readonly alarm_sound_unavailable: "This browser cannot play sounds.";
+    readonly alarm_sound_playing: "Alarm sound is playing: {count} waiting for acknowledgement.";
+    readonly alarm_sound_blocked: "Alarm sound is on, but the browser blocked it: {count} waiting for acknowledgement.";
+    readonly alarm_sound_allow: "Allow sound";
+    readonly alarm_sound_open: "View alarms";
+    readonly alarm_sound_silence: "Silence";
+};
+export default _default;

package/dist/src/i18n/catalogs/en/api-error.d.ts

@@ -0,0 +1,261 @@
+declare const _default: {
+    readonly error_input_invalid: "The submitted data is invalid.";
+    readonly error_workspace_no_access: "You do not have access to this workspace.";
+    readonly error_workspace_suspended: "This workspace is suspended. Open it to see why.";
+    readonly error_workspace_not_owner: "Only the workspace owner can do that.";
+    readonly error_workspace_not_admin: "Only a workspace admin or owner can do that.";
+    readonly error_workspace_not_editor: "Only a workspace editor, admin, or owner can do that.";
+    readonly error_workspace_not_operator: "Only a workspace operator, editor, admin, or owner can do that.";
+    readonly error_dashboard_not_found: "Dashboard not found.";
+    readonly error_dashboard_source_file_not_found: "Dashboard source file not found.";
+    readonly error_dashboard_source_path_invalid: "Invalid dashboard source file path.";
+    readonly error_dashboard_name_invalid: "Enter a dashboard name.";
+    readonly error_dashboard_reorder_mismatch: "The dashboard list changed. Refresh and try again.";
+    readonly error_dashboard_template_not_found: "That dashboard template was not found.";
+    readonly error_report_preset_not_found: "Report not found.";
+    readonly error_report_preset_title_invalid: "Enter a report title.";
+    readonly error_report_preset_validation_failed: "Check the report settings for invalid or missing values.";
+    readonly error_report_preset_parameter_missing: "One or more selected parameters no longer exist.";
+    readonly error_report_preset_freeze_limit_exceeded: "This report contains too many parameters. Remove some and try again.";
+    readonly error_report_preset_no_supported_parameters: "None of the selected parameters can be used in a report.";
+    readonly error_report_preset_temporary_limit_exceeded: "Select at most 20 parameters for a quick report.";
+    readonly error_report_preset_temporary_counter_not_requested: "Counters must be among the report parameters.";
+    readonly error_report_preset_temporary_update_forbidden: "Save this quick report before editing it from Setup.";
+    readonly error_uploads_not_found: "File not found.";
+    readonly error_uploads_too_large: "That file is too large to upload.";
+    readonly error_uploads_invalid_name: "Choose a file with a valid name.";
+    readonly error_uploads_invalid_zip: "That zip file cannot be unpacked.";
+    readonly error_uploads_zip_too_large: "The unpacked zip is too large.";
+    readonly error_uploads_zip_too_many_files: "The zip contains too many files.";
+    readonly error_uploads_empty_zip: "The zip has no files to unpack.";
+    readonly error_uploads_not_ingestable: "Only PDF and Excel files can be processed.";
+    readonly error_uploads_ingest_exists: "Processed files already exist. Delete the output folder before processing this file again.";
+    readonly error_job_runner_unavailable: "Could not start file processing. Try again.";
+    readonly error_job_already_running: "This file is already being processed.";
+    readonly error_report_comment_not_found: "Comment not found.";
+    readonly error_report_comment_forbidden: "You do not have permission to change this comment.";
+    readonly error_report_comment_validation_failed: "Comment validation failed.";
+    readonly error_report_comment_preset_not_found: "Report not found.";
+    readonly error_report_comment_parameter_missing: "That parameter is not on this report.";
+    readonly error_report_render_not_found: "Report not found.";
+    readonly error_report_render_limit_exceeded: "This snapshot is too large to share. Try a shorter time range or fewer parameters.";
+    readonly error_report_render_invalid_files: "Could not create a valid report snapshot. Try again.";
+    readonly error_report_render_promote_failed: "The snapshot was saved, but its share link could not be published. Try again.";
+    readonly error_readings_limit_exceeded: "Too many readings for this request — narrow the time range or reduce points.";
+    readonly error_readings_invalid_window: "Invalid readings time window.";
+    readonly error_readings_browser_timezone: "Browser timezone is not valid for this readings request.";
+    readonly error_readings_invalid_timezone: "Unknown timezone for this readings request.";
+    readonly error_readings_unsupported_value_type: "Unsupported parameter value type for readings.";
+    readonly error_readings_unsupported_aggregation: "Unsupported readings aggregation.";
+    readonly error_readings_unsupported_cadence: "This time interval is not supported.";
+    readonly error_readings_realtime_unavailable: "Live readings are unavailable. Historical data still shows.";
+    readonly error_endpoint_not_found: "Endpoint not found.";
+    readonly error_endpoint_hostname_invalid: "Enter a valid hostname or IP address.";
+    readonly error_endpoint_hostname_blocked: "This hostname is not allowed for Direct endpoints.";
+    readonly error_endpoint_settings_invalid: "Endpoint settings are invalid.";
+    readonly error_endpoint_name_invalid: "Enter a endpoint name.";
+    readonly error_parameter_not_found: "Parameter not found.";
+    readonly error_parameter_mixed_workspace: "All selected parameters and branches must belong to the same workspace.";
+    readonly error_parameter_branch_not_found: "Branch not found.";
+    readonly error_parameter_endpoint_not_found: "Endpoint not found in this workspace.";
+    readonly error_parameter_input_not_found: "One or more calc inputs were not found.";
+    readonly error_parameter_formula_invalid: "This formula cannot be evaluated. Check the placeholders and operators.";
+    readonly error_parameter_input_cycle: "Calc inputs would form a loop. A parameter cannot depend on its own value, even indirectly.";
+    readonly error_parameter_in_use: "A calc parameter, automation or alarm rule uses this parameter. Change or delete it first.";
+    readonly error_parameter_input_self_reference: "A calc parameter cannot reference itself.";
+    readonly error_parameter_invalid_disabled_since: "Invalid disabled timestamp.";
+    readonly error_parameter_invalid_value_type: "This parameter has an invalid value type configuration.";
+    readonly error_parameter_name_invalid: "Enter a name.";
+    readonly error_parameter_const_value_invalid: "This constant value is not valid Base64, or is larger than 1 KiB.";
+    readonly error_template_not_found: "Template not found.";
+    readonly error_template_private: "This template is not available.";
+    readonly error_template_endpoint_not_found: "Endpoint not found in this workspace.";
+    readonly error_template_branch_not_found: "Parent branch not found.";
+    readonly error_template_unit_id_required: "Enter a Modbus unit ID (0–255).";
+    readonly error_template_invalid: "This template could not be applied.";
+    readonly error_endpoint_pin_invalid: "Enter a valid 8-character PIN code.";
+    readonly error_endpoint_pin_not_found: "No device found for this PIN.";
+    readonly error_endpoint_pin_no_public_key: "This device has no VPN public key and cannot be bound.";
+    readonly error_endpoint_public_key_invalid: "Enter a valid WireGuard public key.";
+    readonly error_endpoint_public_key_in_use: "This WireGuard public key is already used by another endpoint.";
+    readonly error_endpoint_identity_frozen: "Kind and public key cannot be changed. Delete this endpoint and create a new one.";
+    readonly error_endpoint_sku_invalid: "Device SKU from the registry is invalid.";
+    readonly error_endpoint_vpn_not_assigned: "No VPN address is assigned to this device. For a PIN device, power it on and connect it to the internet. If the problem persists, contact support.";
+    readonly error_endpoint_vpn_pending: "The VPN address is being assigned. This takes a few seconds.";
+    readonly error_endpoint_vpn_assignment_conflict: "This public key already has a different kind of VPN assignment.";
+    readonly error_endpoint_vpn_pool_exhausted: "No free WireGuard VPN addresses remain.";
+    readonly error_endpoint_vpn_owner_slug_missing: "WireGuard VPN allocation is not configured.";
+    readonly error_endpoint_registry_unavailable: "Device registry is temporarily unavailable.";
+    readonly error_endpoint_vpn_db_unavailable: "The VPN assignment database is temporarily unavailable.";
+    readonly error_endpoint_hostname_not_allowed: "PIN endpoints do not use a hostname.";
+    readonly error_endpoint_device_ui_unsupported: "This endpoint has no device web UI.";
+    readonly error_device_api_endpoint_unsupported: "Device operations are available only for PIN endpoints.";
+    readonly error_device_api_endpoint_disabled: "This endpoint is disabled.";
+    readonly error_device_api_device_unsupported: "This device offers no device operations.";
+    readonly error_device_api_operation_not_found: "This device has no such operation.";
+    readonly error_device_api_role_too_low: "Your role in this workspace does not allow this device operation.";
+    readonly error_device_api_surface_not_allowed: "This device operation cannot be used from here.";
+    readonly error_device_api_input_invalid: "The input does not match this device operation.";
+    readonly error_device_api_rate_limited: "This device operation was called too often. Try again later.";
+    readonly error_device_api_rate_limit_unavailable: "Device operations are temporarily unavailable. Try again shortly.";
+    readonly error_device_api_device_offline: "The device did not answer over the VPN. Check that it is online.";
+    readonly error_device_api_device_busy: "The device is busy with another request. Try again.";
+    readonly error_device_api_access_denied: "The device does not allow this operation over the VPN. Check its access settings.";
+    readonly error_device_api_device_error: "The device answered with an error.";
+    readonly error_endpoint_already_connected: "This PIN is already connected in this workspace.";
+    readonly error_endpoint_presence_unavailable: "The device is not reachable right now. Power it on and try again.";
+    readonly error_endpoint_presence_unsupported: "This MC252 needs firmware 49 or newer to confirm the device is yours. Update the firmware in the device web interface (Administration), then try again.";
+    readonly error_endpoint_presence_required: "Confirm this is your device first.";
+    readonly error_endpoint_presence_invalid: "This confirmation is no longer valid. Start again.";
+    readonly error_endpoint_presence_rejected: "The device did not confirm this code. Check the code on its screen and try again, or press the R button.";
+    readonly error_endpoint_presence_not_pressed: "Press the R button on the device, or enter the code from its screen.";
+    readonly error_endpoint_live_unavailable: "Live connection status is unavailable right now.";
+    readonly error_endpoint_modbus_read_unavailable: "Modbus reads are unavailable right now. Try again shortly.";
+    readonly error_endpoint_modbus_read_invalid: "This Modbus read asks for too many values or goes past address 65535.";
+    readonly error_endpoint_in_use: "Parameters, edge programs, automations or alarm rules still use this endpoint. Move or change them, or delete them first.";
+    readonly error_automation_not_found: "Automation not found.";
+    readonly error_alarm_rule_not_found: "Alarm rule not found.";
+    readonly error_automation_starter_not_found: "That starter was not found.";
+    readonly error_edge_program_starter_not_found: "That starter program was not found.";
+    readonly error_automation_invalid: "This change would leave an automation or alarm rule with errors. Nothing was saved.";
+    readonly error_automation_in_use: "Another automation uses this automation. Change or delete that automation first.";
+    readonly error_alarm_not_found: "This alarm is no longer active.";
+    readonly error_alarm_already_acknowledged: "Someone has already acknowledged this alarm.";
+    readonly error_alarm_not_shelved: "This alarm is not shelved.";
+    readonly error_alarm_log_invalid_cursor: "This history page is no longer valid. Reload the history.";
+    readonly error_alarm_rule_in_use: "An automation uses this alarm rule. Change or delete that automation first.";
+    readonly error_edge_program_not_found: "Edge program not found.";
+    readonly error_device_log_parameter_unsupported: "Only Modbus parameters can take history from device records.";
+    readonly error_edge_endpoint_unsupported: "Edge programs and edge settings are only available for MC252 endpoints.";
+    readonly error_edge_program_name_invalid: "Enter an 8.3 file name with the .TXT extension: up to 8 letters A–Z, digits, _ or - before .TXT.";
+    readonly error_edge_program_name_taken: "Another program on this device already has this file name.";
+    readonly error_edge_program_source_invalid: "The program source must be UTF-8 text of up to 256 KB without NUL characters.";
+    readonly error_edge_device_log_input_invalid: "Read the device log either after a cursor or before an offset, not both.";
+    readonly error_setup_conflict: "Someone changed this item in the meantime. Nothing was saved. Look at the latest version and try again.";
+    readonly error_dashboard_configuration_conflict: "The dashboard configuration changed. Reload it before saving your changes.";
+    readonly error_dashboard_configuration_invalid: "The dashboard configuration does not match its template. Check the highlighted fields and save again.";
+    readonly error_dashboard_configuration_patch_failed: "The change could not be applied to the dashboard configuration: a path in it does not exist, or a test failed.";
+    readonly error_dashboard_document_invalid: "The document has errors. Fix the formulas, names and references it reports, then save again.";
+    readonly error_graphics_conflict: "Someone changed this drawing while you were editing it. Your changes are still in this editor. Review the saved version before saving again.";
+    readonly error_graphics_not_found: "The drawing or image was not found.";
+    readonly error_graphics_invalid_document: "The drawing has invalid values or parameter references. Check its properties and parameter assignments.";
+    readonly error_graphics_invalid_image: "Choose a valid PNG or JPEG image.";
+    readonly error_graphics_image_too_large: "This image is too large. Choose an image under 10 MB.";
+    readonly error_graphics_storage_error: "Could not save the drawing or image. Try again.";
+    readonly error_job_claim_failed: "Could not start the task. Try again.";
+    readonly error_job_persist_failed: "Could not start the task because it could not be saved. Try again.";
+    readonly error_workspace_disabled: "This workspace is suspended. This action is unavailable until it is enabled again.";
+    readonly error_job_schedule_failed: "Could not schedule the task. Try again.";
+    readonly error_job_config_invalid: "Could not start the task because its settings are invalid.";
+    readonly error_job_not_found: "Task not found.";
+    readonly error_job_type_mismatch: "This task is of a different type and cannot be opened here.";
+    readonly error_job_status_invalid: "Could not read the task result. Try again.";
+    readonly error_maps_not_configured: "Maps are not available on this server.";
+    readonly error_maps_rate_limited: "Too many address lookups. Wait a moment and try again.";
+    readonly error_maps_geocode_unavailable: "Could not look up the address for this location. Try again later.";
+    readonly error_endpoint_sku_unsupported: "Device search is only available for Overvis MC252 devices.";
+    readonly error_endpoint_disabled: "This endpoint is disabled. Enable it and try again.";
+    readonly error_endpoint_not_pin: "Device search is only available for endpoints added with a PIN code.";
+    readonly error_class_find_overlay_invalid: "This workspace's device identification catalog is invalid or too large. Fix it and try again.";
+    readonly error_class_find_catalog_unavailable: "The device identification catalog is temporarily unavailable. Try again later.";
+    readonly error_pull_token_invalid: "This download command is not valid. Copy a new command from the Develop locally page.";
+    readonly error_pull_token_expired: "This download command has expired. Refresh the Develop locally page and copy a new command.";
+    readonly error_pull_token_used: "This download command has already been used. Refresh the Develop locally page and copy a new command.";
+    readonly error_pull_api_key_forbidden: "This action is not available with an API key. Sign in to the web app to do it.";
+    readonly error_push_agent_key: "This preview is read-only. Device writes and saved changes are blocked.";
+    readonly error_push_admin_required: "Only a workspace admin or owner can rename the workspace or change its logo or favicon.";
+    readonly error_push_workspace_missing: "This workspace no longer exists.";
+    readonly error_push_conflict: "Someone else changed the same items in the meantime. Get the latest version and try again.";
+    readonly error_push_blob_missing: "Some file contents were not uploaded before sending the changes. Send your changes again.";
+    readonly error_blob_invalid_hash: "The file content identifier is not valid.";
+    readonly error_blob_hash_mismatch: "The uploaded file content does not match its identifier. Upload it again.";
+    readonly error_request_body_too_large: "This request is too large for the server. Send less data at once.";
+    readonly error_blob_too_large: "This file is too large. Files can be at most 50 MB.";
+    readonly error_blob_not_found: "This file content is not part of the workspace.";
+    readonly error_client_outdated: "This version of the workspace app is too old for the server. Update the @overvis/hmi-workspace-ui package in this project and reload the page.";
+    readonly error_push_stage_incomplete: "Some parts of the changes did not arrive. Send your changes again.";
+    readonly error_push_stage_overlap: "Some changes were sent more than once. Send your changes again.";
+    readonly error_push_stage_too_large: "These changes are too large for one push. Push fewer changes at a time.";
+    readonly error_push_id_reused: "These changes were sent with an ID that is already taken: an earlier attempt was already applied, or another push is using it. Get the latest version, then send your changes again.";
+    readonly error_push_create_id_exists: "An item with this ID already exists elsewhere. Create it with a new ID.";
+    readonly error_push_update_id_missing: "An item you changed no longer exists. Get the latest version and try again.";
+    readonly error_push_delete_id_missing: "An item you deleted no longer exists. Get the latest version and try again.";
+    readonly error_push_invalid_create_id: "A new item has an invalid ID. Give it a new randomly generated ID.";
+    readonly error_push_unsafe_path: "A file path is not allowed. Use a relative path inside the workspace folder.";
+    readonly error_push_unknown_path: "A file is in a location that is not synced with the cloud.";
+    readonly error_push_schema_invalid: "Some changes are in an invalid format. Check them and try again.";
+    readonly error_push_pairing: "Dashboard settings and source files must be sent together.";
+    readonly error_push_unknown_dashboard: "The changes refer to a dashboard that does not exist.";
+    readonly error_push_unknown_endpoint: "The changes refer to an endpoint that does not exist.";
+    readonly error_push_unknown_parameter: "The changes refer to a parameter that does not exist.";
+    readonly error_push_unknown_parameter_branch: "The changes refer to a parameter branch that does not exist.";
+    readonly error_push_unknown_report_preset: "The changes refer to a report that does not exist.";
+    readonly error_push_unknown_report_comment: "The changes refer to a report comment that does not exist.";
+    readonly error_push_duplicate_dashboard_id: "The same dashboard appears more than once in the changes.";
+    readonly error_push_duplicate_endpoint_id: "The same endpoint appears more than once in the changes.";
+    readonly error_push_duplicate_parameter_id: "The same parameter appears more than once in the changes.";
+    readonly error_push_duplicate_parameter_branch_id: "The same parameter branch appears more than once in the changes.";
+    readonly error_push_duplicate_report_preset_id: "The same report appears more than once in the changes.";
+    readonly error_push_duplicate_report_comment_id: "The same report comment appears more than once in the changes.";
+    readonly error_push_validation_failed: "Some changes are not valid. Check them and try again.";
+    readonly error_readings_unavailable: "Readings are temporarily unavailable. Try again later.";
+    readonly error_readings_parameter_not_found: "One or more parameters for these readings were not found.";
+    readonly error_readings_family_mismatch: "Some values do not match the parameter's value type.";
+    readonly error_readings_rollup_dirty_failed: "Could not finish saving the readings. Try again.";
+    readonly error_readings_busy: "Other readings are being saved right now. Try again in a minute.";
+    readonly error_workspace_api_key_scope: "This API key is limited to one workspace and cannot be used for this action.";
+    readonly error_workspace_member_exists: "This person is already a member of this workspace.";
+    readonly error_workspace_invitation_missing: "This invitation is no longer pending. Refresh the member list.";
+    readonly error_workspace_owner_cannot_leave: "The workspace owner cannot leave the workspace.";
+    readonly error_billing_account_no_access: "Billing account not found, or you are not a member of it.";
+    readonly error_billing_account_not_manager: "Only owners and managers of the billing account can do this.";
+    readonly error_billing_account_closed: "This billing account is closed.";
+    readonly error_billing_account_missing: "You have no billing account that can pay for a new workspace. Ask the owner of a billing account to make you its manager.";
+    readonly error_helpdesk_not_configured: "Ticket submission is unavailable. Contact support@overvis.com.";
+    readonly error_helpdesk_unavailable: "Helpdesk is unavailable. Try again later.";
+    readonly error_helpdesk_create_failed: "Could not file the Helpdesk ticket.";
+    readonly error_problem_report_unavailable: "Problem reporting is unavailable right now. Try again later.";
+    readonly error_problem_report_invalid_screenshot: "Use a PNG, JPEG, or WebP screenshot no larger than 5 MB.";
+    readonly error_problem_report_delivery_failed: "Could not send the report. Try again.";
+    readonly error_problem_report_rate_limited: "Too many reports were sent recently. Try again later.";
+    readonly error_branding_path_invalid: "This logo file path is not valid.";
+    readonly error_branding_slot_duplicate: "Each logo slot can hold only one file.";
+    readonly error_branding_extension_invalid: "Logos must be SVG or PNG files.";
+    readonly error_branding_file_too_large: "The logo file is too large.";
+    readonly error_branding_file_invalid: "The logo file is not a valid image.";
+    readonly error_branding_image_too_large: "The logo image is too large in pixels.";
+    readonly error_branding_not_found: "Logo not found.";
+    readonly error_authentication_required: "Sign in to continue.";
+    readonly error_admission_required: "Your account does not have access yet. Use an invitation or access code to continue.";
+    readonly error_onboarding_required: "Complete your profile in the web app to continue.";
+    readonly error_audit_invalid_cursor: "This history page is no longer valid. Reload the history.";
+    readonly error_audit_archived_workspace_required: "Choose a deleted workspace to view its history.";
+    readonly error_checkpoint_not_found: "This checkpoint no longer exists. Reload the history.";
+    readonly error_checkpoint_not_named: "Only named checkpoints can be renamed or deleted.";
+    readonly error_checkpoint_invalid_cursor: "This checkpoint list is no longer valid. Reload the history.";
+    readonly error_checkpoint_revert_target_invalid: "Choose either a checkpoint or a moment to revert to.";
+    readonly error_checkpoint_revert_before_history: "Setup history does not reach that far back. Choose a later moment.";
+    readonly error_checkpoint_revert_conflict: "The setup changed since you opened this revert. Review the changes again.";
+    readonly error_checkpoint_revert_file_missing: "Some files of that setup are no longer stored, so it cannot be restored.";
+    readonly error_checkpoint_revert_unreadable: "Some items of that setup can no longer be read, so it cannot be restored exactly.";
+    readonly error_checkpoint_revert_device_unconfirmed: "Confirm every deleted device on site before reverting: press R on it, or enter the code from its screen. Revert from Setup → Activity history.";
+    readonly error_checkpoint_revert_device_changed: "The PIN of a deleted connection now belongs to another device, so it cannot be restored.";
+    readonly error_notification_channel_not_connected: "Set this channel up before turning it on.";
+    readonly error_notification_phone_invalid: "Enter a mobile number in international format, starting with + and the country code.";
+    readonly error_notification_phone_country_unsupported: "SMS cannot be sent to numbers from this country.";
+    readonly error_notification_phone_rate_limited: "Too many codes were requested. Try again later.";
+    readonly error_notification_phone_code_invalid: "The code is not correct. Check the SMS and try again.";
+    readonly error_notification_phone_code_expired: "This code is no longer valid. Request a new one.";
+    readonly error_telegram_unavailable: "This installation has no Telegram bot to connect.";
+    readonly error_telegram_link_impersonation: "Support staff signed in to your account cannot connect Telegram to it.";
+    readonly error_storage_override_not_found: "This retention rule no longer exists. Reload the page.";
+    readonly error_storage_override_empty: "Choose at least one parameter or branch for this rule.";
+    readonly error_storage_target_not_found: "Some chosen parameters or branches no longer exist. Reload the page.";
+    readonly error_storage_target_taken: "Another retention rule already covers some of the chosen parameters or branches.";
+    readonly error_storage_invalid_range: "The start of the period must be before its end.";
+    readonly error_storage_history_too_recent: "Activity history of the last 30 days cannot be deleted.";
+    readonly error_storage_alarm_log_too_recent: "Alarm log events of the last 30 days cannot be deleted.";
+    readonly error_storage_unavailable: "Stored data cannot be read right now. Try again in a minute.";
+    readonly error_storage_range_too_recent: "A deletion must end at least five minutes ago. Count it again, then delete.";
+};
+export default _default;

package/dist/src/i18n/catalogs/en/audit.d.ts

@@ -0,0 +1,133 @@
+declare const _default: {
+    readonly audit_title: "Activity history";
+    readonly audit_description: "Saved setup changes and confirmed writes to parameters.";
+    readonly audit_menu: "Activity history";
+    readonly audit_time: "Time";
+    readonly audit_actor: "Actor";
+    readonly audit_action: "Action";
+    readonly audit_target: "Target";
+    readonly audit_all_actors: "All actors";
+    readonly audit_actor_user: "User";
+    readonly audit_actor_assistant: "Assistant";
+    readonly audit_actor_api_key: "API key";
+    readonly audit_actor_automation: "Automation";
+    readonly audit_actor_system: "System";
+    readonly audit_empty: "No activity matches these filters.";
+    readonly audit_more: "Load older";
+    readonly audit_export_json: "Export JSON";
+    readonly audit_export_csv: "Export CSV";
+    readonly audit_before: "Before";
+    readonly audit_after: "After";
+    readonly audit_operation_create: "Created";
+    readonly audit_operation_update: "Changed";
+    readonly audit_operation_delete: "Deleted";
+    readonly audit_operation_write: "Write";
+    readonly audit_operation_call: "Call";
+    readonly audit_filter_actor: "Person or ID";
+    readonly audit_filter_origin: "Performed via";
+    readonly audit_export_truncated: "The export reached 10,000 events. Narrow the filters to export the remaining history.";
+    readonly audit_credential: "Credential: {id}";
+    readonly audit_write_complete: "Complete";
+    readonly audit_write_partial: "Partial";
+    readonly audit_filters: "Filters";
+    readonly audit_clear_filters: "Clear filters";
+    readonly audit_period: "Period";
+    readonly audit_more_targets: "+{count} more";
+    readonly audit_show_details: "Show details";
+    readonly audit_hide_details: "Hide details";
+    readonly audit_target_key: "Key: {key}";
+    readonly audit_field: "Field";
+    readonly audit_value: "Value";
+    readonly audit_target_type_workspace: "Workspace";
+    readonly audit_target_type_workspace_permission: "Workspace access";
+    readonly audit_target_type_workspace_invitation: "Invitation";
+    readonly audit_target_type_workspace_file: "Workspace file";
+    readonly audit_target_type_dashboard: "Dashboard";
+    readonly audit_target_type_endpoint: "Endpoint";
+    readonly audit_target_type_device_api: "Device API";
+    readonly audit_target_type_readings: "Readings";
+    readonly audit_target_type_audit_history: "Activity history";
+    readonly audit_target_type_alarm_log: "Alarm log";
+    readonly audit_target_type_readings_retention_override: "Readings retention rule";
+    readonly audit_storage_records_deleted: "{count} records deleted";
+    readonly audit_storage_records_incomplete: "{count} records selected, the deletion stopped before it finished";
+    readonly audit_storage_records_stopped: "Records deleted: {count}, the deletion stopped before it finished";
+    readonly audit_target_type_edge_program: "Edge program";
+    readonly audit_target_type_parameter_tree_branch: "Parameter branch";
+    readonly audit_target_type_parameter: "Parameter";
+    readonly audit_target_type_report_preset: "Report";
+    readonly audit_target_type_report_preset_parameter: "Report parameter";
+    readonly audit_target_type_report_comment: "Report comment";
+    readonly audit_target_type_alarm_rule: "Alarm rule";
+    readonly audit_target_type_automation: "Automation";
+    readonly audit_target_type_workspace_billing_link: "Billing account";
+    readonly audit_target_type_workspace_suspension: "Suspension";
+    readonly audit_target_type_user: "User account";
+    readonly audit_target_type_account: "Sign-in method";
+    readonly audit_target_type_api_key: "API key";
+    readonly audit_target_type_audit_probe: "Audit storage check";
+    readonly audit_via: "Via";
+    readonly audit_all_origins: "All channels";
+    readonly audit_all_actions: "All actions";
+    readonly audit_origin_ui: "Web app";
+    readonly audit_origin_assistant: "Assistant";
+    readonly audit_origin_api: "API";
+    readonly audit_origin_auth: "Authentication";
+    readonly audit_origin_http: "File upload";
+    readonly audit_origin_admin: "Local administration";
+    readonly audit_origin_system: "System";
+    readonly audit_origin_pmapper: "Device service";
+    readonly audit_origin_automation_runner: "Automations";
+    readonly audit_target_type_impersonation_grant: "Support login authorization";
+    readonly audit_target_type_support_session: "Support session";
+    readonly audit_view: "Show";
+    readonly audit_view_activity: "All activity";
+    readonly audit_view_checkpoints: "Checkpoints only";
+    readonly checkpoint_scope: "Checkpoint kinds";
+    readonly checkpoint_scope_important: "Important checkpoints";
+    readonly checkpoint_scope_all: "All checkpoints";
+    readonly checkpoint_create: "Create checkpoint";
+    readonly checkpoint_create_description: "Mark the current setup with a name so you can find this point in the history again.";
+    readonly checkpoint_name: "Name";
+    readonly checkpoint_reason: "Reason (optional)";
+    readonly checkpoint_rename: "Rename";
+    readonly checkpoint_rename_title: "Rename checkpoint";
+    readonly checkpoint_delete: "Delete";
+    readonly checkpoint_delete_title: "Delete checkpoint “{name}”?";
+    readonly checkpoint_delete_description: "The checkpoint is removed from the history. The setup and the activity history stay as they are.";
+    readonly checkpoint_revert: "Revert to this checkpoint";
+    readonly checkpoint_revert_title: "Revert the setup to “{name}”?";
+    readonly checkpoint_revert_description: "The setup returns to how it was at {time}. A “Before revert” checkpoint is taken first, so you can undo this.";
+    readonly checkpoint_revert_loading: "Working out the changes…";
+    readonly checkpoint_revert_changes: "The revert makes these changes:";
+    readonly checkpoint_revert_no_changes: "The setup already matches this checkpoint.";
+    readonly checkpoint_revert_const_values: "Constant values to restore: {count}.";
+    readonly checkpoint_revert_unreadable: "These items can no longer be read, so the setup cannot be restored exactly:";
+    readonly checkpoint_revert_devices: "Confirm these devices to restore them";
+    readonly checkpoint_revert_devices_description: "They were deleted after this checkpoint. Press R on each device, or enter the code from its screen. Revert turns on once every device is confirmed.";
+    readonly checkpoint_revert_device_confirmed: "Confirmed";
+    readonly checkpoint_revert_device_retry: "Try again";
+    readonly checkpoint_revert_readings: "Restored parameters keep their recorded readings. Readings that were deleted, by people or by retention, stay deleted. Local checkouts get the reverted setup on their next pull.";
+    readonly checkpoint_revert_confirm: "Revert";
+    readonly checkpoint_revert_pending: "Reverting…";
+    readonly checkpoint_actions: "Actions for checkpoint “{name}”";
+    readonly checkpoint_marker: "Checkpoint";
+    readonly checkpoint_kind_named: "Checkpoint";
+    readonly checkpoint_kind_before_push: "Before push";
+    readonly checkpoint_kind_before_assistant_turn: "Before assistant changes";
+    readonly checkpoint_kind_before_template: "Before template";
+    readonly checkpoint_kind_before_import: "Before import";
+    readonly checkpoint_kind_before_revert: "Before revert";
+    readonly checkpoint_kind_before_bulk_delete: "Before bulk delete";
+    readonly checkpoint_kind_daily: "Daily";
+    readonly checkpoint_author_assistant: "Assistant for {name}";
+    readonly checkpoint_author_deleted: "Deleted user";
+    readonly checkpoint_show_changes: "Show changes after this checkpoint";
+    readonly checkpoint_hide_changes: "Hide changes";
+    readonly checkpoint_changes_until_next: "Setup changes until the next checkpoint";
+    readonly checkpoint_changes_until_now: "Setup changes since this checkpoint";
+    readonly checkpoint_changes_none: "No setup changes.";
+    readonly checkpoint_changes_loading: "Collecting changes…";
+    readonly checkpoint_empty: "No checkpoints yet. Create one to mark the current setup.";
+};
+export default _default;