@crossbind/port-gdal-wasi 2.0.0-beta.50

package/dist/prebuilt/wasi-wasm32-st-release/share/man/man1/gdal-raster-pipeline.1

@@ -0,0 +1,1256 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "GDAL-RASTER-PIPELINE" "1" "Aug 18, 2026" "" "GDAL"
+.SH NAME
+gdal-raster-pipeline \- Process a raster dataset applying several steps
+.sp
+Added in version 3.11.
+
+.SH DESCRIPTION
+.sp
+\fBgdal raster pipeline\fP can be used to process a raster dataset and
+perform various processing steps that accept raster and generate raster.
+.sp
+For pipelines mixing raster and vector, consult \fI\%gdal pipeline\fP\&.
+.sp
+Most steps proceed in on\-demand evaluation of raster blocks,
+unless otherwise stated in their documentation, without \(dqmaterializing\(dq the
+resulting dataset of the operation of each step. It may be desirable sometimes
+for performance purposes to proceed to materializing an intermediate dataset
+to disk using \fI\%gdal raster materialize\fP\&.
+.SH SYNOPSIS
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+Usage: gdal raster pipeline [OPTIONS] <PIPELINE>
+
+Process a raster dataset applying several steps.
+
+Positional arguments:
+
+Common Options:
+  \-h, \-\-help              Display help message and exit
+  \-\-json\-usage            Display usage as JSON document and exit
+  \-\-config <KEY>=<VALUE>  Configuration option [may be repeated]
+  \-q, \-\-quiet             Quiet mode (no progress bar or warning message) [not available in pipelines]
+
+<PIPELINE> is of the form: read|mosaic|stack [READ\-OPTIONS] ( ! <STEP\-NAME> [STEP\-OPTIONS] )* ! info|compare|tile|write [WRITE\-OPTIONS]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+A pipeline chains several steps, separated with the \fI!\fP (exclamation mark) character.
+The first step must be \fBread\fP, \fBcalc\fP, \fBcreate\fP, \fBmosaic\fP or \fBstack\fP,
+and the last one \fBwrite\fP, \fBinfo\fP or \fBtile\fP\&.
+Each step has its own positional or non\-positional arguments.
+Apart from \fBread\fP, \fBcalc\fP, \fBmosaic\fP, \fBstack\fP, \fBcompare\fP, \fBinfo\fP, \fBtile\fP and \fBwrite\fP,
+all other steps can potentially be used several times in a pipeline.
+.SH STEPS
+.INDENT 0.0
+.IP \(bu 2
+\fI\%aspect\fP
+.IP \(bu 2
+\fI\%blend\fP
+.IP \(bu 2
+\fI\%calc\fP
+.IP \(bu 2
+\fI\%clip\fP
+.IP \(bu 2
+\fI\%color\-map\fP
+.IP \(bu 2
+\fI\%compare\fP
+.IP \(bu 2
+\fI\%create\fP
+.IP \(bu 2
+\fI\%edit\fP
+.IP \(bu 2
+\fI\%external\fP
+.IP \(bu 2
+\fI\%fill\-nodata\fP
+.IP \(bu 2
+\fI\%hillshade\fP
+.IP \(bu 2
+\fI\%info\fP
+.IP \(bu 2
+\fI\%materialize\fP
+.IP \(bu 2
+\fI\%mosaic\fP
+.IP \(bu 2
+\fI\%neighbors\fP
+.IP \(bu 2
+\fI\%nodata\-to\-alpha\fP
+.IP \(bu 2
+\fI\%overview\fP
+.IP \(bu 2
+\fI\%pansharpen\fP
+.IP \(bu 2
+\fI\%proximity\fP
+.IP \(bu 2
+\fI\%read\fP
+.IP \(bu 2
+\fI\%reclassify\fP
+.IP \(bu 2
+\fI\%reproject\fP
+.IP \(bu 2
+\fI\%resize\fP
+.IP \(bu 2
+\fI\%rgb\-to\-palette\fP
+.IP \(bu 2
+\fI\%roughness\fP
+.IP \(bu 2
+\fI\%scale\fP
+.IP \(bu 2
+\fI\%select\fP
+.IP \(bu 2
+\fI\%set\-type\fP
+.IP \(bu 2
+\fI\%sieve\fP
+.IP \(bu 2
+\fI\%slope\fP
+.IP \(bu 2
+\fI\%stack\fP
+.IP \(bu 2
+\fI\%tee\fP
+.IP \(bu 2
+\fI\%tile\fP
+.IP \(bu 2
+\fI\%tpi\fP
+.IP \(bu 2
+\fI\%tri\fP
+.IP \(bu 2
+\fI\%unscale\fP
+.IP \(bu 2
+\fI\%update\fP
+.IP \(bu 2
+\fI\%viewshed\fP
+.IP \(bu 2
+\fI\%write\fP
+.UNINDENT
+.SS aspect
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* aspect [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate an aspect map
+
+Options:
+  \-b, \-\-band <BAND>              Input band (1\-based index) (default: 1)
+  \-\-convention <CONVENTION>      Convention for output angles. CONVENTION=azimuth|trigonometric\-angle (default: azimuth)
+  \-\-gradient\-alg <GRADIENT\-ALG>  Algorithm used to compute terrain gradient. GRADIENT\-ALG=Horn|ZevenbergenThorne (default: Horn)
+  \-\-zero\-for\-flat                Whether to output zero for flat areas
+  \-\-no\-edges                     Do not try to interpolate values at dataset edges or close to nodata values
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster aspect\fP\&.
+.SS blend
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* blend [OPTIONS] <OVERLAY>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Blend/compose two raster datasets
+
+Positional arguments:
+  \-\-overlay <OVERLAY>     Overlay dataset [required]
+
+Options:
+  \-\-operator <OPERATOR>   Composition operator. OPERATOR=src\-over|hsv\-value|multiply|screen|overlay|hard\-light|darken|lighten|color\-dodge|color\-burn (default: src\-over)
+  \-\-opacity <OPACITY>     Opacity percentage to apply to the overlay dataset (0=fully transparent, 100=full use of overlay opacity) (default: 100)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster blend\fP\&.
+.SS calc
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* calc [OPTIONS] <INPUTS>...
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Perform raster algebra
+
+Positional arguments:
+  \-i, \-\-input <INPUTS>                                     Input raster datasets [1.. values] [required]
+
+Options:
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64
+  \-\-no\-check\-crs                                           Do not check consistency of input coordinate reference systems
+  \-\-no\-check\-extent                                        Do not check consistency of input extents
+  \-\-propagate\-nodata                                       Whether to set pixels to the output NoData value if any of the input pixels is NoData
+  \-\-calc <CALC>                                            Expression(s) to evaluate [1.. values] [required]
+  \-\-dialect <DIALECT>                                      Expression dialect. DIALECT=muparser|builtin (default: muparser)
+  \-\-flatten                                                Generate a single band output raster per expression, even if input datasets are multiband
+  \-\-nodata <NODATA>                                        Assign a specified nodata value to output bands (\(aqnone\(aq, numeric value, \(aqnan\(aq, \(aqinf\(aq, \(aq\-inf\(aq)
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>                      Input formats [may be repeated]
+  \-\-oo, \-\-open\-option <KEY>=<VALUE>                        Open options [may be repeated]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster calc\fP\&.
+.SS clip
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* clip [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Clip a raster dataset.
+
+Options:
+  \-\-bbox <BBOX>                    Clipping bounding box as xmin,ymin,xmax,ymax
+                                   Mutually exclusive with \-\-window, \-\-geometry, \-\-like
+  \-\-bbox\-crs <BBOX\-CRS>            CRS of clipping bounding box
+  \-\-window <WINDOW>                Raster window as col,line,width,height in pixels
+                                   Mutually exclusive with \-\-bbox, \-\-geometry, \-\-like
+  \-\-geometry <GEOMETRY>            Clipping geometry (WKT or GeoJSON)
+                                   Mutually exclusive with \-\-bbox, \-\-window, \-\-like
+  \-\-geometry\-crs <GEOMETRY\-CRS>    CRS of clipping geometry
+  \-\-like <DATASET>                 Dataset to use as a template for bounds
+                                   Mutually exclusive with \-\-bbox, \-\-window, \-\-geometry
+  \-\-like\-sql <SELECT\-STATEMENT>    SELECT statement to run on the \(aqlike\(aq dataset
+                                   Mutually exclusive with \-\-like\-where
+  \-\-like\-layer <LAYER\-NAME>        Name of the layer of the \(aqlike\(aq dataset
+  \-\-like\-where <WHERE\-EXPRESSION>  WHERE SQL clause to run on the \(aqlike\(aq dataset
+                                   Mutually exclusive with \-\-like\-sql
+  \-\-only\-bbox                      For \(aqgeometry\(aq and \(aqlike\(aq, only consider their bounding box
+  \-\-allow\-bbox\-outside\-source      Allow clipping box to include pixels outside input dataset
+  \-\-add\-alpha                      Adds an alpha mask band to the destination when the source raster have none.
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster clip\fP\&.
+.SS color\-map
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* color\-map [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate a RGB or RGBA dataset from a single band, using a color map
+
+Options:
+  \-b, \-\-band <BAND>                    Input band (1\-based index) (default: 1)
+  \-\-color\-map <COLOR\-MAP>              Color map filename
+  \-\-add\-alpha                          Adds an alpha mask band to the destination.
+  \-\-color\-selection <COLOR\-SELECTION>  How to compute output colors from input values. COLOR\-SELECTION=interpolate|exact|nearest (default: interpolate)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster color\-map\fP\&.
+.SS compare
+.sp
+Added in version 3.12.
+
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* compare [OPTIONS] <REFERENCE>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Compare two raster datasets.
+
+Positional arguments:
+  \-\-reference <REFERENCE>  Reference dataset [required]
+
+Options:
+  \-\-skip\-all\-optional      Skip all optional comparisons
+  \-\-skip\-binary            Skip binary file comparison
+  \-\-skip\-crs               Skip CRS comparison
+  \-\-skip\-geotransform      Skip geotransform comparison
+  \-\-skip\-overview          Skip overview comparison
+  \-\-skip\-metadata          Skip metadata comparison
+  \-\-skip\-rpc               Skip RPC metadata comparison
+  \-\-skip\-geolocation       Skip Geolocation metadata comparison
+  \-\-skip\-subdataset        Skip subdataset comparison
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster compare\fP\&.
+.SS create
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* create [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Create a new raster dataset.
+
+Options:
+  \-i, \-\-like, \-\-input <TEMPLATE\-DATASET>                   Template raster dataset
+  \-\-size <width>,<height>                                  Output size in pixels
+  \-\-band\-count <BAND\-COUNT>                                Number of bands (default: 1)
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64 (default: Byte)
+  \-\-nodata <NODATA>                                        Assign a specified nodata value to output bands (\(aqnone\(aq, numeric value, \(aqnan\(aq, \(aqinf\(aq, \(aq\-inf\(aq)
+  \-\-burn <BURN>                                            Burn value [may be repeated]
+  \-\-crs <CRS>                                              Set CRS
+  \-\-bbox <BBOX>                                            Bounding box as xmin,ymin,xmax,ymax
+  \-\-metadata <KEY>=<VALUE>                                 Add metadata item [may be repeated]
+  \-\-copy\-metadata                                          Copy metadata from input dataset
+                                                           Depends on \-\-input
+  \-\-copy\-overviews                                         Create same overview levels as input dataset
+                                                           Depends on \-\-input
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>                      Input formats [may be repeated]
+  \-\-oo, \-\-open\-option <KEY>=<VALUE>                        Open options [may be repeated]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster create\fP\&.
+.SS edit
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* edit [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Edit a raster dataset.
+
+Options:
+  \-b, \-\-band <BAND>                                           Active band (1\-based index)
+  \-\-crs <CRS>                                                 Override CRS (without reprojection)
+  \-\-bbox <BBOX>                                               Bounding box as xmin,ymin,xmax,ymax
+  \-\-nodata <NODATA>                                           Assign a specified nodata value to output bands (\(aqnone\(aq, numeric value, \(aqnan\(aq, \(aqinf\(aq, \(aq\-inf\(aq)
+  \-\-color\-interpretation <[all|<BAND>=]<COLOR\-INTEPRETATION>  Set band color interpretation [may be repeated]
+  \-\-color\-map <COLOR\-MAP>                                     Color map filename
+                                                              Mutually exclusive with \-\-unset\-color\-table
+  \-\-scale <[<BAND>=]<SCALE>                                   Override band scale factor [may be repeated]
+  \-\-offset <[<BAND>=]<OFFSET>                                 Override band offset constant [may be repeated]
+  \-\-metadata <KEY>=<VALUE>                                    Add/update dataset metadata item [may be repeated]
+  \-\-unset\-color\-table                                         Unset color table on 1st band or the one specified with \-\-band
+                                                              Mutually exclusive with \-\-color\-map
+  \-\-unset\-metadata <KEY>                                      Remove dataset metadata item(s) [may be repeated]
+  \-\-unset\-metadata\-domain <DOMAIN>                            Remove dataset metadata domain(s) [may be repeated]
+  \-\-gcp <GCP>                                                 Add ground control point, formatted as pixel,line,easting,northing[,elevation], or @filename [may be repeated]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster edit\fP\&.
+.SS external
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* external [OPTIONS] <COMMAND>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Execute an external program as a step of a pipeline
+
+Positional arguments:
+  \-\-command <COMMAND>                                  External command, optionally with <INPUT> and/or <OUTPUT> or <INPUT\-OUTPUT> placeholders [required]
+
+Options:
+  \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>  Output format
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>                  Input formats
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal external\fP\&.
+.SS fill\-nodata
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* fill\-nodata [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Fill nodata raster regions by interpolation from edges.
+
+Options:
+  \-b, \-\-band <BAND>                                  Input band (1\-based index) (default: 1)
+  \-d, \-\-max\-distance <MAX_DISTANCE>                  The maximum distance (in pixels) that the algorithm will search out for values to interpolate. (default: 100)
+  \-s, \-\-smoothing\-iterations <SMOOTHING_ITERATIONS>  The number of 3x3 average filter smoothing iterations to run after the interpolation to dampen artifacts. The default is zero smoothing iterations. (default: 0)
+  \-\-mask <MASK>                                      Use the first band of the specified file as a validity mask (zero is invalid, non\-zero is valid).
+  \-\-strategy <STRATEGY>                              By default, pixels are interpolated using an inverse distance weighting (invdist). It is also possible to choose a nearest neighbour (nearest) strategy.. STRATEGY=invdist|nearest (default: invdist)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster fill\-nodata\fP\&.
+.SS hillshade
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* hillshade [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate a shaded relief map
+
+Options:
+  \-b, \-\-band <BAND>              Input band (1\-based index) (default: 1)
+  \-z, \-\-zfactor <ZFACTOR>        Vertical exaggeration used to pre\-multiply the elevations
+  \-\-xscale <XSCALE>              Ratio of vertical units to horizontal X axis units
+  \-\-yscale <YSCALE>              Ratio of vertical units to horizontal Y axis units
+  \-\-azimuth <AZIMUTH>            Azimuth of the light, in degrees (default: 315)
+  \-\-altitude <ALTITUDE>          Altitude of the light, in degrees (default: 45)
+  \-\-gradient\-alg <GRADIENT\-ALG>  Algorithm used to compute terrain gradient. GRADIENT\-ALG=Horn|ZevenbergenThorne (default: Horn)
+  \-\-variant <VARIANT>            Variant of the hillshading algorithm. VARIANT=regular|combined|multidirectional|Igor (default: regular)
+  \-\-no\-edges                     Do not try to interpolate values at dataset edges or close to nodata values
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster hillshade\fP\&.
+.SS info
+.sp
+Added in version 3.12.
+
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* info [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Return information on a raster dataset.
+
+Options:
+  \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>  Output format. OUTPUT\-FORMAT=json|text
+  \-\-mm, \-\-min\-max                                      Compute minimum and maximum value
+  \-\-stats                                              Retrieve or compute statistics, using all pixels
+                                                       Mutually exclusive with \-\-approx\-stats
+  \-\-approx\-stats                                       Retrieve or compute statistics, using a subset of pixels
+                                                       Mutually exclusive with \-\-stats
+  \-\-hist                                               Retrieve or compute histogram
+
+Advanced Options:
+  \-\-no\-gcp                                             Suppress ground control points list printing
+  \-\-no\-md                                              Suppress metadata printing
+  \-\-no\-ct                                              Suppress color table printing
+  \-\-no\-fl                                              Suppress file list printing
+  \-\-checksum                                           Compute pixel checksum
+  \-\-list\-metadata\-domains, \-\-list\-mdd                  List all metadata domains available for the dataset
+  \-\-mdd, \-\-metadata\-domain <METADATA\-DOMAIN>           Report metadata for the specified domain. \(aqall\(aq can be used to report metadata in all domains
+
+Esoteric Options:
+  \-\-no\-nodata                                          Suppress retrieving nodata value
+  \-\-no\-mask                                            Suppress mask band information
+  \-\-subdataset <SUBDATASET>                            Use subdataset of specified index (starting at 1), instead of the source dataset itself
+  \-\-crs\-format <CRS\-FORMAT>                            Which format to use to report CRS. CRS\-FORMAT=AUTO|WKT2|PROJJSON (default: AUTO)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster info\fP\&.
+.SS materialize
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* materialize [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Materialize a piped dataset on disk to increase the efficiency of the following steps.
+
+Options:
+  \-o, \-\-output <OUTPUT>                                Materialized dataset name (created by algorithm)
+  \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>  Output format
+  \-\-co, \-\-creation\-option <KEY>=<VALUE>                Creation option [may be repeated]
+  \-\-overwrite                                          Whether overwriting existing output dataset is allowed
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster materialize\fP\&.
+.SS mosaic
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* mosaic [OPTIONS] <INPUTS>...
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Build a mosaic, either virtual (VRT) or materialized.
+
+Positional arguments:
+  \-i, \-\-input <INPUTS>                                            Input raster datasets (or specify a @<filename> to point to a file containing filenames) [1.. values] [required]
+
+Options:
+  \-b, \-\-band <BAND>                                               Input band(s) (1\-based index) [may be repeated]
+  \-\-absolute\-path                                                 Whether the path to the input datasets should be stored as an absolute path
+  \-\-resolution <xres>,<yres>|same|average|common|highest|lowest>  Target resolution (in destination CRS units) (default: same)
+  \-\-bbox <BBOX>                                                   Target bounding box as xmin,ymin,xmax,ymax (in destination CRS units)
+  \-\-target\-aligned\-pixels                                         Round target extent to target resolution
+  \-\-input\-nodata <INPUT\-NODATA>                                   Set nodata values for input bands. [1.. values]
+  \-\-output\-nodata <OUTPUT\-NODATA>                                 Set nodata values at the destination band level. [1.. values]
+  \-\-hide\-nodata                                                   Makes the destination band not report the NoData.
+  \-\-add\-alpha                                                     Adds an alpha mask band to the destination when the source raster have none.
+  \-\-pixel\-function <PIXEL\-FUNCTION>                               Specify a pixel function to calculate output value from overlapping inputs. PIXEL\-FUNCTION=area|argmax|argmin|cmul|complex|conj|dB|dB2amp|dB2pow|diff|div|exp|expression|geometric_mean|harmonic_mean|imag|intensity|interpolate_exp|interpolate_linear|inv|log10|max|mean|median|min|mod|mode|mul|norm_diff|phase|polar|pow|quantile|real|reclassify|replace_nodata|round|scale|sqrt|sum
+  \-\-pixel\-function\-arg <NAME>=<VALUE>                             Specify argument(s) to pass to the pixel function [may be repeated]
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>                             Input formats [may be repeated]
+  \-\-oo, \-\-open\-option <KEY>=<VALUE>                               Open options [may be repeated]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster mosaic\fP\&.
+.SS neighbors
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* neighbors [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Compute the value of each pixel from its neighbors (focal statistics)
+
+Options:
+  \-b, \-\-band <BAND>                                        Input band (1\-based index)
+  \-\-method <METHOD>                                        Method to combine weighed source pixels. METHOD=mean|sum|min|max|stddev|median|mode [may be repeated]
+  \-\-size <SIZE>                                            Neighborhood size
+  \-\-kernel <KERNEL>                                        Convolution kernel(s) to apply [1.. values] [required]
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64 (default: Float64)
+  \-\-nodata <NODATA>                                        Assign a specified nodata value to output bands (\(aqnone\(aq, numeric value, \(aqnan\(aq, \(aqinf\(aq, \(aq\-inf\(aq)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster neighbors\fP\&.
+.SS nodata\-to\-alpha
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* nodata\-to\-alpha [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Replace nodata value(s) with an alpha band.
+
+Options:
+  \-\-nodata <NODATA>       Override nodata value of input band(s) (numeric value, \(aqnan\(aq, \(aqinf\(aq, \(aq\-inf\(aq) [may be repeated]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster nodata\-to\-alpha\fP\&.
+.SS overview
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* overview <COMMAND> [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+where <COMMAND> is one of:
+  \- add: Adding overviews.
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster overview\fP\&.
+.SS pansharpen
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* pansharpen [OPTIONS] <SPECTRAL>...
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Perform a pansharpen operation.
+
+Positional arguments:
+  \-\-spectral <SPECTRAL>                                    Input spectral band dataset [1.. values] [required]
+
+Options:
+  \-r, \-\-resampling <RESAMPLING>                            Resampling algorithm. RESAMPLING=nearest|bilinear|cubic|cubicspline|lanczos|average (default: cubic)
+  \-\-weights <WEIGHTS>                                      Weight for each input spectral band [may be repeated]
+  \-\-nodata <NODATA>                                        Override nodata value of input bands
+  \-\-bit\-depth <BIT\-DEPTH>                                  Override bit depth of input bands
+  \-\-spatial\-extent\-adjustment <SPATIAL\-EXTENT\-ADJUSTMENT>  Select behavior when bands have not the same extent. SPATIAL\-EXTENT\-ADJUSTMENT=union|intersection|none|none\-without\-warning (default: union)
+  \-j, \-\-num\-threads <NUM\-THREADS>                          Number of jobs (or ALL_CPUS) (default: ALL_CPUS)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster pansharpen\fP\&.
+.SS proximity
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* proximity [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Produces a raster proximity map.
+
+Options:
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64|Byte|UInt16|Int16|UInt32|Int32|Float32|Float64 (default: Float32)
+  \-b, \-\-band <BAND>                                        Input band (1\-based index)
+  \-\-target\-values <TARGET\-VALUES>                          Target pixel values [may be repeated]
+  \-\-distance\-units <DISTANCE\-UNITS>                        Distance units. DISTANCE\-UNITS=pixel|geo (default: pixel)
+  \-\-max\-distance <MAX\-DISTANCE>                            Maximum distance. The nodata value will be used for pixels beyond this distance (default: 0)
+  \-\-fixed\-value <FIXED\-VALUE>                              Fixed value for the pixels that are within the maximum distance (instead of the actual distance) (default: 0)
+  \-\-nodata <NODATA>                                        Specify a nodata value to use for pixels that are beyond the maximum distance
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster proximity\fP\&.
+.SS read
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* read [OPTIONS] <INPUT>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Read a raster dataset.
+
+Positional arguments:
+  \-i, \-\-input <INPUT>                  Input raster datasets [required]
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>  Input formats [may be repeated]
+  \-\-oo, \-\-open\-option <KEY>=<VALUE>    Open options [may be repeated]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster pipeline read\fP\&.
+.SS reclassify
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* reclassify [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Reclassify values in a raster dataset
+
+Options:
+  \-m, \-\-mapping <MAPPING>                                  Reclassification mappings (or specify a @<filename> to point to a file containing mappings [required]
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster reclassify\fP\&.
+.SS reproject
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* reproject [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Reproject a raster dataset.
+
+Options:
+  \-s, \-\-input\-crs <INPUT\-CRS>                Input CRS
+  \-\-like <DATASET>                           Dataset to use as a template for target bounds, CRS, size and nodata
+  \-d, \-\-output\-crs <OUTPUT\-CRS>              Output CRS
+  \-r, \-\-resampling <RESAMPLING>              Resampling method. RESAMPLING=nearest|bilinear|cubic|cubicspline|lanczos|average|rms|mode|min|max|med|q1|q3|sum (default: nearest)
+  \-\-resolution <xres>,<yres>                 Target resolution (in destination CRS units)
+                                             Mutually exclusive with \-\-size
+  \-\-size <width>,<height>                    Target size in pixels
+                                             Mutually exclusive with \-\-resolution
+  \-\-bbox <BBOX>                              Target bounding box (in destination CRS units)
+  \-\-bbox\-crs <BBOX\-CRS>                      CRS of target bounding box
+  \-j, \-\-num\-threads <NUM\-THREADS>            Number of jobs (or ALL_CPUS) (default: ALL_CPUS)
+
+Advanced Options:
+  \-\-target\-aligned\-pixels                    Round target extent to target resolution
+  \-\-input\-nodata <INPUT\-NODATA>              Set nodata values for input bands (\(aqNone\(aq to unset). [1.. values]
+  \-\-output\-nodata <OUTPUT\-NODATA>            Set nodata values for output bands (\(aqNone\(aq to unset). [1.. values]
+  \-\-add\-alpha                                Adds an alpha mask band to the destination when the source raster have none.
+  \-\-wo, \-\-warp\-option <NAME>=<VALUE>         Warping option(s) [may be repeated]
+  \-\-to, \-\-transform\-option <NAME>=<VALUE>    Transform option(s) [may be repeated]
+  \-\-et, \-\-error\-threshold <ERROR\-THRESHOLD>  Error threshold
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster reproject\fP\&.
+.SS resize
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* resize [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Resize a raster dataset without changing the georeferenced extents.
+
+Options:
+  \-\-resolution <xres>,<yres>     Target resolution (in destination CRS units)
+                                 Mutually exclusive with \-\-size
+  \-\-size <width[%]>,<height[%]>  Target size in pixels (or percentage if using \(aq%\(aq suffix) [required]
+                                 Mutually exclusive with \-\-resolution
+  \-r, \-\-resampling <RESAMPLING>  Resampling method. RESAMPLING=nearest|bilinear|cubic|cubicspline|lanczos|average|mode (default: nearest)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster resize\fP\&.
+.SS rgb\-to\-palette
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* rgb\-to\-palette [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Convert a RGB image into a pseudo\-color / paletted image.
+
+Options:
+  \-\-color\-count <COLOR\-COUNT>      Select the number of colors in the generated color table (default: 256)
+  \-\-color\-map <COLOR\-MAP>          Color map filename
+  \-\-output\-nodata <OUTPUT\-NODATA>  Output nodata value
+  \-\-no\-dither                      Disable Floyd\-Steinberg dithering
+  \-\-bit\-depth <BIT\-DEPTH>          Bit depth of color palette component (8 bit causes longer computation time). BIT\-DEPTH=5|8 (default: 5)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster rgb\-to\-palette\fP\&.
+.SS roughness
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* roughness [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate a roughness map
+
+Options:
+  \-b, \-\-band <BAND>       Input band (1\-based index) (default: 1)
+  \-\-no\-edges              Do not try to interpolate values at dataset edges or close to nodata values
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster roughness\fP\&.
+.SS scale
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* scale [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Scale the values of the bands of a raster dataset.
+
+Options:
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64
+  \-b, \-\-band <BAND>                                        Select band to restrict the scaling (1\-based index)
+  \-\-input\-min <INPUT\-MIN>                                  Minimum value of the source range
+                                                           Depends on \-\-input\-max
+  \-\-input\-max <INPUT\-MAX>                                  Maximum value of the source range
+                                                           Depends on \-\-input\-min
+  \-\-output\-min <OUTPUT\-MIN>                                Minimum value of the destination range
+                                                           Depends on \-\-output\-max
+  \-\-output\-max <OUTPUT\-MAX>                                Maximum value of the destination range
+                                                           Depends on \-\-output\-min
+  \-\-exponent <EXPONENT>                                    Exponent to apply non\-linear scaling with a power function
+  \-\-no\-clip                                                Do not clip input values to [innput\-min, input\-max]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster scale\fP\&.
+.SS select
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* select [OPTIONS] <BAND>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Select a subset of bands from a raster dataset.
+
+Positional arguments:
+  \-b, \-\-band <BAND>       Band(s) (1\-based index, \(aqmask\(aq, \(aqmask:<band>\(aq or color interpretation such as \(aqred\(aq) [1.. values] [required]
+
+Options:
+  \-\-exclude               Exclude specified bands
+  \-\-mask <MASK>           Mask band (1\-based index, \(aqmask\(aq, \(aqmask:<band>\(aq or \(aqnone\(aq)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster select\fP\&.
+.SS set\-type
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* set\-type [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Modify the data type of bands of a raster dataset.
+
+Options:
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64 [required]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster set\-type\fP\&.
+.SS sieve
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* sieve [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Remove small polygons from a raster dataset.
+
+Options:
+  \-\-mask <MASK>                          Use the first band of the specified file as a validity mask (all pixels with a value other than zero will be considered suitable for inclusion in polygons)
+  \-b, \-\-band <BAND>                      Input band (1\-based index)
+  \-s, \-\-size\-threshold <SIZE\-THRESHOLD>  Minimum size of polygons to keep (default: 2)
+  \-c, \-\-connect\-diagonal\-pixels          Consider diagonal pixels as connected
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster sieve\fP\&.
+.SS slope
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* slope [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate a slope map
+
+Options:
+  \-b, \-\-band <BAND>              Input band (1\-based index) (default: 1)
+  \-\-unit <UNIT>                  Unit in which to express slopes. UNIT=degree|percent (default: degree)
+  \-\-xscale <XSCALE>              Ratio of vertical units to horizontal X axis units
+  \-\-yscale <YSCALE>              Ratio of vertical units to horizontal Y axis units
+  \-\-gradient\-alg <GRADIENT\-ALG>  Algorithm used to compute terrain gradient. GRADIENT\-ALG=Horn|ZevenbergenThorne (default: Horn)
+  \-\-no\-edges                     Do not try to interpolate values at dataset edges or close to nodata values
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster slope\fP\&.
+.SS stack
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* stack [OPTIONS] <INPUTS>...
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Combine together input bands into a multi\-band output, either virtual (VRT) or materialized.
+
+Positional arguments:
+  \-i, \-\-input <INPUTS>                                            Input raster datasets (or specify a @<filename> to point to a file containing filenames) [1.. values] [required]
+
+Options:
+  \-b, \-\-band <BAND>                                               Input band(s) (1\-based index) [may be repeated]
+  \-\-absolute\-path                                                 Whether the path to the input datasets should be stored as an absolute path
+  \-\-resolution <xres>,<yres>|same|average|common|highest|lowest>  Target resolution (in destination CRS units) (default: same)
+  \-\-bbox <BBOX>                                                   Target bounding box as xmin,ymin,xmax,ymax (in destination CRS units)
+  \-\-target\-aligned\-pixels                                         Round target extent to target resolution
+  \-\-input\-nodata <INPUT\-NODATA>                                   Set nodata values for input bands. [1.. values]
+  \-\-output\-nodata <OUTPUT\-NODATA>                                 Set nodata values at the destination band level. [1.. values]
+  \-\-hide\-nodata                                                   Makes the destination band not report the NoData.
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>                             Input formats [may be repeated]
+  \-\-oo, \-\-open\-option <KEY>=<VALUE>                               Open options [may be repeated]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster stack\fP\&.
+.SS tee
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* tee [OPTIONS] [<PIPELINE>...]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Pipes the input into the output stream and side nested pipelines.
+
+Positional arguments:
+  \-\-tee\-pipeline <PIPELINE>  Nested pipeline [1.. values]
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%Output nested pipeline\fP\&.
+.SS tile
+.sp
+Added in version 3.12.
+
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* tile [OPTIONS] <OUTPUT>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate tiles in separate files from a raster dataset.
+
+Positional arguments:
+  \-o, \-\-output <OUTPUT>                                            Output directory [required]
+
+Options:
+  \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>              Output format (default: PNG)
+  \-\-co, \-\-creation\-option <KEY>=<VALUE>                            Creation option [may be repeated]
+  \-\-tiling\-scheme <TILING\-SCHEME>                                  Tiling scheme. TILING\-SCHEME=raster|WebMercatorQuad|WorldCRS84Quad|WorldMercatorWGS84Quad|GoogleCRS84Quad|PseudoTMS_GlobalMercator|GlobalGeodeticOriginLat270|LINZAntarticaMapTilegrid|APSTILE|CBMTILE|NZTM2000 (default: WebMercatorQuad)
+  \-\-min\-zoom <MIN\-ZOOM>                                            Minimum zoom level
+  \-\-max\-zoom <MAX\-ZOOM>                                            Maximum zoom level
+  \-\-min\-x <MIN\-X>                                                  Minimum tile X coordinate
+  \-\-max\-x <MAX\-X>                                                  Maximum tile X coordinate
+  \-\-min\-y <MIN\-Y>                                                  Minimum tile Y coordinate
+  \-\-max\-y <MAX\-Y>                                                  Maximum tile Y coordinate
+  \-\-no\-intersection\-ok                                             Whether dataset extent not intersecting tile matrix is only a warning
+  \-r, \-\-resampling <RESAMPLING>                                    Resampling method for max zoom. RESAMPLING=nearest|bilinear|cubic|cubicspline|lanczos|average|rms|mode|min|max|med|q1|q3|sum (default: cubic)
+  \-\-overview\-resampling <OVERVIEW\-RESAMPLING>                      Resampling method for overviews. OVERVIEW\-RESAMPLING=nearest|bilinear|cubic|cubicspline|lanczos|average|rms|mode|min|max|med|q1|q3|sum
+  \-\-convention <CONVENTION>                                        Tile numbering convention: xyz (from top) or tms (from bottom). CONVENTION=xyz|tms (default: xyz)
+  \-\-tile\-size <TILE\-SIZE>                                          Override default tile size
+  \-\-add\-alpha                                                      Whether to force adding an alpha channel
+                                                                   Mutually exclusive with \-\-no\-alpha
+  \-\-no\-alpha                                                       Whether to disable adding an alpha channel
+                                                                   Mutually exclusive with \-\-add\-alpha
+  \-\-output\-nodata <OUTPUT\-NODATA>                                  Output nodata value
+  \-\-skip\-blank                                                     Do not generate blank tiles
+  \-\-metadata <KEY>=<VALUE>                                         Add metadata item to output tiles [may be repeated]
+  \-\-copy\-src\-metadata                                              Whether to copy metadata from source dataset
+  \-\-aux\-xml                                                        Generate .aux.xml sidecar files when needed
+  \-\-kml                                                            Generate KML files
+  \-\-resume                                                         Generate only missing files
+  \-j, \-\-num\-threads <NUM\-THREADS>                                  Number of jobs (or ALL_CPUS) (default: ALL_CPUS)
+  \-\-parallel\-method <PARALLEL\-METHOD>                              Parallelization method (thread, spawn, fork). PARALLEL\-METHOD=thread|spawn|fork
+
+Advanced Resampling Options:
+  \-\-excluded\-values <EXCLUDED\-VALUES>                              Tuples of values (e.g. <R>,<G>,<B> or (<R1>,<G1>,<B1>),(<R2>,<G2>,<B2>)) that must beignored as contributing source pixels during (average) resampling
+  \-\-excluded\-values\-pct\-threshold <EXCLUDED\-VALUES\-PCT\-THRESHOLD>  Minimum percentage of source pixels that must be set at one of the \-\-excluded\-values to cause the excluded value to be used as the target pixel value (default: 50)
+  \-\-nodata\-values\-pct\-threshold <NODATA\-VALUES\-PCT\-THRESHOLD>      Minimum percentage of source pixels that must be set at one of nodata (or alpha=0 or any other way to express transparent pixelto cause the target pixel value to be transparent (default: 100)
+
+Publication Options:
+  \-\-webviewer <WEBVIEWER>                                          Web viewer to generate. WEBVIEWER=none|all|leaflet|openlayers|mapml|stac (default: all) [may be repeated]
+  \-\-url <URL>                                                      URL address where the generated tiles are going to be published
+  \-\-title <TITLE>                                                  Title of the map
+  \-\-copyright <COPYRIGHT>                                          Copyright for the map
+  \-\-mapml\-template <MAPML\-TEMPLATE>                                Filename of a template mapml file where variables will be substituted
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster tile\fP\&.
+.SS tpi
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* tpi [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate a Topographic Position Index (TPI) map
+
+Options:
+  \-b, \-\-band <BAND>       Input band (1\-based index) (default: 1)
+  \-\-no\-edges              Do not try to interpolate values at dataset edges or close to nodata values
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster tpi\fP\&.
+.SS tri
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* tri [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Generate a Terrain Ruggedness Index (TRI) map
+
+Options:
+  \-b, \-\-band <BAND>        Input band (1\-based index) (default: 1)
+  \-\-algorithm <ALGORITHM>  Algorithm to compute TRI. ALGORITHM=Riley|Wilson (default: Riley)
+  \-\-no\-edges               Do not try to interpolate values at dataset edges or close to nodata values
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster tri\fP\&.
+.SS unscale
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* unscale [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Convert scaled values of a raster dataset into unscaled values.
+
+Options:
+  \-\-ot, \-\-datatype, \-\-output\-data\-type <OUTPUT\-DATA\-TYPE>  Output data type. OUTPUT\-DATA\-TYPE=UInt8|Int8|UInt16|Int16|UInt32|Int32|UInt64|Int64|CInt16|CInt32|Float16|Float32|Float64|CFloat32|CFloat64
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster unscale\fP\&.
+.SS update
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* update [OPTIONS] <OUTPUT>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Update the destination raster with the content of the input one.
+
+Positional arguments:
+  \-o, \-\-output <OUTPUT>                      Output raster dataset [required]
+
+Options:
+  \-\-geometry <GEOMETRY>                      Clipping geometry (WKT or GeoJSON)
+  \-\-geometry\-crs <GEOMETRY\-CRS>              CRS of clipping geometry
+  \-r, \-\-resampling <RESAMPLING>              Resampling method. RESAMPLING=nearest|bilinear|cubic|cubicspline|lanczos|average|rms|mode|min|max|med|q1|q3|sum (default: nearest)
+  \-\-no\-update\-overviews                      Do not update existing overviews
+
+Advanced Options:
+  \-\-wo, \-\-warp\-option <NAME>=<VALUE>         Warping option(s) [may be repeated]
+  \-\-to, \-\-transform\-option <NAME>=<VALUE>    Transform option(s) [may be repeated]
+  \-\-et, \-\-error\-threshold <ERROR\-THRESHOLD>  Error threshold
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster update\fP\&.
+.SS viewshed
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* viewshed [OPTIONS]
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Compute the viewshed of a raster dataset.
+
+Options:
+  \-p, \-\-pos, \-\-position <X,Y> or <X,Y,H>           Observer position [2..3 values]
+  \-z, \-\-height <HEIGHT>                            Observer height
+  \-\-sd\-filename <SD\-FILENAME>                      Filename of standard\-deviation raster
+  \-\-target\-height <TARGET\-HEIGHT>                  Height of the target above the DEM surface in the height unit of the DEM. (default: 0)
+  \-\-mode <MODE>                                    Sets what information the output contains.. MODE=normal|DEM|ground|cumulative (default: normal)
+  \-\-max\-distance <MAX\-DISTANCE>                    Maximum distance from observer to compute visibility. It is also used to clamp the extent of the output raster.
+  \-\-min\-distance <MIN\-DISTANCE>                    Mask all cells less than this distance from the observer. Must be less than \(aqmax\-distance\(aq.
+  \-\-start\-angle <START\-ANGLE>                      Mask all cells outside of the arc (\(aqstart\-angle\(aq, \(aqend\-angle\(aq). Clockwise degrees from north. Also used to clamp the extent of the output raster.
+  \-\-end\-angle <END\-ANGLE>                          Mask all cells outside of the arc (\(aqstart\-angle\(aq, \(aqend\-angle\(aq). Clockwise degrees from north. Also used to clamp the extent of the output raster.
+  \-\-high\-pitch <HIGH\-PITCH>                        Mark all cells out\-of\-range where the observable height would be higher than the \(aqhigh\-pitch\(aq angle from the observer. Degrees from horizontal \- positive is up. Must be greater than \(aqlow\-pitch\(aq.
+  \-\-low\-pitch <LOW\-PITCH>                          Bound observable height to be no lower than the \(aqlow\-pitch\(aq angle from the observer. Degrees from horizontal \- positive is up. Must be less than \(aqhigh\-pitch\(aq.
+  \-\-curvature\-coefficient <CURVATURE\-COEFFICIENT>  Coefficient to consider the effect of the curvature and refraction.
+  \-b, \-\-band <BAND>                                Input band (1\-based index) (default: 1)
+  \-\-visible\-value <VISIBLE\-VALUE>                  Pixel value to set for visible areas (default: 255)
+  \-\-invisible\-value <INVISIBLE\-VALUE>              Pixel value to set for invisible areas (default: 0)
+  \-\-maybe\-visible\-value <MAYBE\-VISIBLE\-VALUE>      Pixel value to set for potentially visible areas (default: 2)
+  \-\-out\-of\-range\-value <OUT\-OF\-RANGE\-VALUE>        Pixel value to set for the cells that fall outside of the range specified by the observer location and the maximum distance (default: 0)
+  \-\-output\-nodata <OUTPUT\-NODATA>                  The value to be set for the cells in the output raster that have no data.
+  \-\-observer\-spacing <OBSERVER\-SPACING>            Cell Spacing between observers (default: 10)
+  \-j, \-\-num\-threads <NUM\-THREADS>                  Number of jobs (or ALL_CPUS) (default: 3)
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster viewshed\fP\&.
+.SS write
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+* write [OPTIONS] <OUTPUT>
+\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-\-
+
+Write a raster dataset.
+
+Positional arguments:
+  \-o, \-\-output <OUTPUT>                                Output raster dataset [required]
+
+Options:
+  \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>  Output format (\(dqGDALG\(dq allowed)
+  \-\-co, \-\-creation\-option <KEY>=<VALUE>                Creation option [may be repeated]
+  \-\-overwrite                                          Whether overwriting existing output dataset is allowed
+                                                       Mutually exclusive with \-\-append
+  \-\-append                                             Append as a subdataset to existing output
+                                                       Mutually exclusive with \-\-overwrite
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+Details for options can be found in \fI\%gdal raster pipeline write\fP\&.
+.SH GDALG OUTPUT (ON-THE-FLY / STREAMED DATASET)
+.sp
+A pipeline can be serialized as a JSON file using the \fBGDALG\fP output format.
+The resulting file can then be opened as a raster dataset using the
+\fI\%GDALG: GDAL Streamed Algorithm\fP driver, and apply the specified pipeline in a on\-the\-fly /
+streamed way.
+.sp
+The \fBcommand_line\fP member of the JSON file should nominally be the whole command
+line without the final \fBwrite\fP step, and is what is generated by
+\fBgdal raster pipeline ! .... ! write out.gdalg.json\fP\&.
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+{
+    \(dqtype\(dq: \(dqgdal_streamed_alg\(dq,
+    \(dqcommand_line\(dq: \(dqgdal raster pipeline ! read in.tif ! reproject \-\-output\-crs=EPSG:32632\(dq
+}
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+The final \fBwrite\fP step can be added but if so it must explicitly specify the
+\fBstream\fP output format and a non\-significant output dataset name.
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+{
+    \(dqtype\(dq: \(dqgdal_streamed_alg\(dq,
+    \(dqcommand_line\(dq: \(dqgdal raster pipeline ! read in.tif ! reproject \-\-output\-crs=EPSG:32632 ! write \-\-output\-format=streamed streamed_dataset\(dq
+}
+.EE
+.UNINDENT
+.UNINDENT
+.SH SUBSTITUTIONS
+.sp
+Added in version 3.12.
+
+.sp
+It is possible to use \fBgdal pipeline\fP to use a pipeline already
+serialized in a .gdal.json file, and customize its existing steps, typically
+changing an input filename, specifying an output filename, or adding/modifying arguments
+of steps.
+.sp
+See \fI\%Substitutions\fP\&.
+.SH NESTED PIPELINE
+.sp
+Added in version 3.12.
+
+.sp
+It is possible to create \(dqnested pipelines\(dq, i.e. pipelines inside pipelines.
+.sp
+A nested pipeline is delimited by square brackets (\fB[\fP and \fB]\fP) surrounded
+by a space character.
+.sp
+There are 2 kinds of nested pipelines:
+.INDENT 0.0
+.IP \(bu 2
+input nested pipelines: where the result dataset of the nested pipeline is
+used as the input dataset for an argument of the main pipeline.
+.IP \(bu 2
+output nested pipelines: where the output of a step of the main pipeline is
+used as the input of the nested pipeline in a following step. Output nested
+pipelines can only be used with the \fBtee\fP step.
+.UNINDENT
+.sp
+See \fI\%Nested pipeline\fP\&.
+.SH RETURN STATUS CODE
+.sp
+The program returns status code 0 in case of success, and non\-zero in case of
+error (non\-blocking errors emitted as warnings are considered as a successful
+execution).
+.SH EXAMPLES
+.SS Example 1: Reproject a GeoTIFF file to CRS EPSG:32632 (\(dqWGS 84 / UTM zone 32N\(dq) and adding a metadata item
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+$ gdal raster pipeline ! read in.tif ! reproject \-\-output\-crs=EPSG:32632 ! edit \-\-metadata AUTHOR=EvenR ! write out.tif \-\-overwrite
+.EE
+.UNINDENT
+.UNINDENT
+.SS Example 2: Serialize the command of a reprojection of a GeoTIFF file in a GDALG file, and later read it
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+$ gdal raster pipeline ! read in.tif ! reproject \-\-output\-crs=EPSG:32632 ! write in_epsg_32632.gdalg.json \-\-overwrite
+$ gdal raster info in_epsg_32632.gdalg.json
+.EE
+.UNINDENT
+.UNINDENT
+.SS Example 3: Mosaic on\-the\-fly several input files and tile that mosaic.
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+gdal raster pipeline ! mosaic input*.tif ! tile output_folder
+.EE
+.UNINDENT
+.UNINDENT
+.SS Example 4: Reclassify GeoTIFF and render it as RGB image.
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+$ gdal raster pipeline ! read in.tif ! reclassify \-m \(dq[1,10]=1; [11,20]=2; [21,30]=3; DEFAULT=NO_DATA\(dq \-\-ot=Byte ! color\-map \-\-color\-map=color_map.txt \-\-color\-selection=exact \-\-add\-alpha ! write \-f WEBP rendered.webp
+.EE
+.UNINDENT
+.UNINDENT
+.SH AUTHOR
+Even Rouault <even.rouault@spatialys.com>
+.SH COPYRIGHT
+1998-2026
+.\" Generated by docutils manpage writer.
+.