@crossbind/port-gdal-wasi 2.0.0-beta.50

package/dist/prebuilt/wasi-wasm32-st-release/share/man/man1/gdal-raster-contour.1

@@ -0,0 +1,304 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "GDAL-RASTER-CONTOUR" "1" "Aug 18, 2026" "" "GDAL"
+.SH NAME
+gdal-raster-contour \- Creates a vector contour from a raster elevation model (DEM)
+.sp
+Added in version 3.11.
+
+.SH SYNOPSIS
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+Usage: gdal raster contour [OPTIONS] <INPUT> <OUTPUT>
+
+Creates a vector contour from a raster elevation model (DEM).
+
+Positional arguments:
+  \-i, \-\-input <INPUT>                                  Input raster datasets [required] [not available in pipelines]
+  \-o, \-\-output <OUTPUT>                                Output vector dataset [required] [not available in pipelines]
+
+Common Options:
+  \-h, \-\-help                                           Display help message and exit
+  \-\-json\-usage                                         Display usage as JSON document and exit
+  \-\-config <KEY>=<VALUE>                               Configuration option [may be repeated]
+  \-q, \-\-quiet                                          Quiet mode (no progress bar or warning message) [not available in pipelines]
+
+Options:
+  \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>  Output format (\(dqGDALG\(dq allowed) [not available in pipelines]
+  \-\-co, \-\-creation\-option <KEY>=<VALUE>                Creation option [may be repeated] [not available in pipelines]
+  \-\-lco, \-\-layer\-creation\-option <KEY>=<VALUE>         Layer creation option [may be repeated] [not available in pipelines]
+  \-\-overwrite                                          Whether overwriting existing output dataset is allowed [not available in pipelines]
+  \-\-output\-layer <OUTPUT\-LAYER>                        Output layer name
+  \-b, \-\-band <BAND>                                    Input band (1\-based index) (default: 1)
+  \-\-elevation\-name <ELEVATION\-NAME>                    Name of the elevation field
+  \-\-min\-name <MIN\-NAME>                                Name of the minimum elevation field
+  \-\-max\-name <MAX\-NAME>                                Name of the maximum elevation field
+  \-\-3d                                                 Force production of 3D vectors instead of 2D
+  \-\-input\-nodata <INPUT\-NODATA>                        Input pixel value to treat as \(aqnodata\(aq
+  \-\-interval <INTERVAL>                                Elevation interval between contours
+                                                       Mutually exclusive with \-\-levels, \-\-exp\-base
+  \-\-levels <LEVELS>                                    List of contour levels [may be repeated]
+                                                       Mutually exclusive with \-\-interval, \-\-exp\-base
+  \-e, \-\-exp\-base <EXP\-BASE>                            Base for exponential contour level generation
+                                                       Mutually exclusive with \-\-interval, \-\-levels
+  \-\-off, \-\-offset <OFFSET>                             Offset to apply to contour levels
+  \-p, \-\-polygonize                                     Create polygons instead of lines
+  \-\-group\-transactions <GROUP\-TRANSACTIONS>            Group n features per transaction (default 100 000)
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>                  Input formats [may be repeated] [not available in pipelines]
+  \-\-oo, \-\-open\-option <KEY>=<VALUE>                    Open options [may be repeated] [not available in pipelines]
+  \-\-output\-oo, \-\-output\-open\-option <KEY>=<VALUE>      Output open options [may be repeated] [not available in pipelines]
+.EE
+.UNINDENT
+.UNINDENT
+.SH DESCRIPTION
+.sp
+\fBgdal raster contour\fP creates a vector contour from a raster elevation model (DEM).
+.sp
+Since GDAL 3.12, this algorithm can be part of a \fI\%gdal pipeline\fP\&.
+.sp
+Added in version 3.12.
+
+.SH GDALG OUTPUT (ON-THE-FLY / STREAMED DATASET)
+.sp
+This program supports serializing the command line as a JSON file using the \fBGDALG\fP output format.
+The resulting file can then be opened as a vector dataset using the
+\fI\%GDALG: GDAL Streamed Algorithm\fP driver, and apply the specified pipeline in a on\-the\-fly /
+streamed way.
+.sp
+\fBNOTE:\fP
+.INDENT 0.0
+.INDENT 3.5
+However this algorithm is not natively streaming compatible. Consequently a
+in\-memory temporary dataset will be generated, which may cause significant processing
+time at opening.
+.UNINDENT
+.UNINDENT
+.SH PROGRAM-SPECIFIC OPTIONS
+.INDENT 0.0
+.TP
+.B \-\-3d
+Forces the production of 3D vectors instead of 2D. Includes elevation at every vertex.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-b, \-\-band <BAND>
+Picks a particular band to get the DEM from. Defaults to band 1.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-elevation\-name <ELEVATION\-NAME>
+Provides a name for the attribute in which to put the elevation. If not provided no elevation attribute is attached. Ignored in polygonal contouring (\-p) mode.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-e, \-\-exp\-base <EXP\-BASE>
+Generate levels on an exponential scale: base ^ k, for k an integer. Mutually exclusive with \fI\%\-\-interval\fP, \fI\%\-\-levels\fP\&.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-group\-transactions <GROUP\-TRANSACTIONS>
+Group n features per transaction (default 100 000).
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-interval <INTERVAL>
+Elevation interval between contours. Mutually exclusive with \fI\%\-\-levels\fP, \fI\%\-\-exp\-base\fP\&.
+The first contour will be generated at the first multiple of \fBINTERVAL\fP which is greater than the raster minimum value.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-levels <LEVELS>
+List of contour levels. \fIMIN\fP and \fIMAX\fP are special values that represent the minimum and maximum values in the raster.
+When \fI\-\-polygonize\fP is used, the specified values are used as bounds of the generated polygons.
+Mutually exclusive with \fI\%\-\-interval\fP, \fI\%\-\-exp\-base\fP\&.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-max\-name <MAX\-NAME>
+Provides a name for the attribute in which to put the maximum elevation. If not provided no maximum elevation attribute is attached. Ignored in polygonal contouring (\-p) mode.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-min\-name <MIN\-NAME>
+Provides a name for the attribute in which to put the minimum elevation. If not provided no minimum elevation attribute is attached. Ignored in polygonal contouring (\-p) mode.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-off, \-\-offset <OFFSET>
+Offset from zero relative to which to interpret intervals.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-nln, \-\-output\-layer <OUTPUT\-LAYER>
+Provides a name for the output vector layer. Defaults to \(dqcontour\(dq.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-p, \-\-polygonize
+Create polygons instead of lines.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-input\-nodata <INPUT\-NODATA>
+Input pixel value to treat as \(aqnodata\(aq.
+.UNINDENT
+.SH STANDARD OPTIONS
+.INDENT 0.0
+.TP
+.B \-\-co, \-\-creation\-option <NAME>=<VALUE>
+Many formats have one or more optional creation options that can be
+used to control particulars about the file created. For instance,
+the GeoTIFF driver supports creation options to control compression,
+and whether the file should be tiled.
+.sp
+May be repeated.
+.sp
+The creation options available vary by format driver, and some
+simple formats have no creation options at all. A list of options
+supported for a format can be listed with the
+\fI\%\-\-formats\fP
+command line option but the documentation for the format is the
+definitive source of information on driver creation options.
+See \fI\%Raster drivers\fP format
+specific documentation for legal creation options for each format.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-if, \-\-input\-format <format>
+Format/driver name to be attempted to open the input file(s). It is generally
+not necessary to specify it, but it can be used to skip automatic driver
+detection, when it fails to select the appropriate driver.
+This option can be repeated several times to specify several candidate drivers.
+Note that it does not force those drivers to open the dataset. In particular,
+some drivers have requirements on file extensions.
+.sp
+May be repeated.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-lco, \-\-layer\-creation\-option <NAME>=<VALUE>
+Many formats have one or more optional layer creation options that can be
+used to control particulars about the layer created. For instance,
+the GeoPackage driver supports layer creation options to control the
+feature identifier or geometry column name, setting the identifier or
+description, etc.
+.sp
+May be repeated.
+.sp
+The layer creation options available vary by format driver, and some
+simple formats have no layer creation options at all. A list of options
+supported for a format can be listed with the
+\fI\%\-\-formats\fP
+command line option but the documentation for the format is the
+definitive source of information on driver creation options.
+See \fI\%Vector drivers\fP format
+specific documentation for legal creation options for each format.
+.sp
+Note that layer creation options are different from dataset creation options.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-oo, \-\-open\-option <NAME>=<VALUE>
+Dataset open option (format specific).
+.sp
+May be repeated.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-output\-open\-option, \-\-output\-oo <NAME>=<VALUE>
+Added in version 3.12.
+
+.sp
+Dataset open option for output dataset (format specific).
+.sp
+May be repeated.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>
+Which output vector format to use. Allowed values may be given by
+\fBgdal \-\-formats | grep vector | grep rw | sort\fP
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-overwrite
+Allow program to overwrite existing target file or dataset.
+Otherwise, by default, \fBgdal\fP errors out if the target file or
+dataset already exists.
+.UNINDENT
+.SH RETURN STATUS CODE
+.sp
+The program returns status code 0 in case of success, and non\-zero in case of
+error (non\-blocking errors emitted as warnings are considered as a successful
+execution).
+.SH EXAMPLES
+.SS Example 1: Create contour lines from a raster elevation model
+.INDENT 0.0
+.INDENT 3.5
+The following example creates contour lines from a raster elevation model:
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+gdal raster contour \-\-interval 100 elevation.tif contour.shp
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+This will create a shapefile named \fBcontour.shp\fP with contour lines at 100 meter intervals.
+.UNINDENT
+.UNINDENT
+.SS Example 2: Create contour polygons from a raster elevation model with custom attributes and fixed levels
+.INDENT 0.0
+.INDENT 3.5
+The following example creates contour polygons from a raster elevation model with custom attributes and fixed levels:
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+gdal raster contour \-\-levels MIN,100,200,MAX \-\-polygonize \-\-min\-name MIN \-\-max\-name MAX elevation.tif contour.shp
+.EE
+.UNINDENT
+.UNINDENT
+.sp
+This will create a shapefile named \fBcontour.shp\fP with contour polygons from the minimum raster value to 100,
+and from 100 to 200 and from 200 to the maximum value, and with attributes \fBMIN\fP, and \fBMAX\fP\&.
+.UNINDENT
+.UNINDENT
+.SH AUTHOR
+Alessandro Pasotti <elpaso@itopen.it>
+.SH COPYRIGHT
+1998-2026
+.\" Generated by docutils manpage writer.
+.

package/dist/prebuilt/wasi-wasm32-st-release/share/man/man1/gdal-raster-convert.1

@@ -0,0 +1,167 @@
+.\" Man page generated from reStructuredText.
+.
+.
+.nr rst2man-indent-level 0
+.
+.de1 rstReportMargin
+\\$1 \\n[an-margin]
+level \\n[rst2man-indent-level]
+level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
+-
+\\n[rst2man-indent0]
+\\n[rst2man-indent1]
+\\n[rst2man-indent2]
+..
+.de1 INDENT
+.\" .rstReportMargin pre:
+. RS \\$1
+. nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
+. nr rst2man-indent-level +1
+.\" .rstReportMargin post:
+..
+.de UNINDENT
+. RE
+.\" indent \\n[an-margin]
+.\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.nr rst2man-indent-level -1
+.\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
+.in \\n[rst2man-indent\\n[rst2man-indent-level]]u
+..
+.TH "GDAL-RASTER-CONVERT" "1" "Aug 18, 2026" "" "GDAL"
+.SH NAME
+gdal-raster-convert \- Convert a raster dataset
+.sp
+Added in version 3.11.
+
+.SH SYNOPSIS
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+Usage: gdal raster convert [OPTIONS] <INPUT> <OUTPUT>
+
+Convert a raster dataset.
+
+Positional arguments:
+  \-i, \-\-input <INPUT>                                  Input raster datasets [required] [not available in pipelines]
+  \-o, \-\-output <OUTPUT>                                Output raster dataset [required] [not available in pipelines]
+
+Common Options:
+  \-h, \-\-help                                           Display help message and exit
+  \-\-json\-usage                                         Display usage as JSON document and exit
+  \-\-config <KEY>=<VALUE>                               Configuration option [may be repeated]
+  \-q, \-\-quiet                                          Quiet mode (no progress bar or warning message) [not available in pipelines]
+
+Options:
+  \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>  Output format (\(dqGDALG\(dq allowed) [not available in pipelines]
+  \-\-co, \-\-creation\-option <KEY>=<VALUE>                Creation option [may be repeated] [not available in pipelines]
+  \-\-overwrite                                          Whether overwriting existing output dataset is allowed [not available in pipelines]
+                                                       Mutually exclusive with \-\-append
+  \-\-append                                             Append as a subdataset to existing output [not available in pipelines]
+                                                       Mutually exclusive with \-\-overwrite
+
+Advanced Options:
+  \-\-if, \-\-input\-format <INPUT\-FORMAT>                  Input formats [may be repeated] [not available in pipelines]
+  \-\-oo, \-\-open\-option <KEY>=<VALUE>                    Open options [may be repeated] [not available in pipelines]
+.EE
+.UNINDENT
+.UNINDENT
+.SH DESCRIPTION
+.sp
+\fBgdal raster convert\fP can be used to convert raster data between
+different formats.
+.SH STANDARD OPTIONS
+.INDENT 0.0
+.TP
+.B \-\-append
+Append input raster as a new subdataset to an existing output file.
+Only works with drivers that support adding subdatasets such as
+\fI\%GTiff \-\- GeoTIFF File Format\fP and \fI\%GPKG \-\- GeoPackage raster\fP
+This also creates the output dataset if it does not exist yet.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-co, \-\-creation\-option <NAME>=<VALUE>
+Many formats have one or more optional creation options that can be
+used to control particulars about the file created. For instance,
+the GeoTIFF driver supports creation options to control compression,
+and whether the file should be tiled.
+.sp
+May be repeated.
+.sp
+The creation options available vary by format driver, and some
+simple formats have no creation options at all. A list of options
+supported for a format can be listed with the
+\fI\%\-\-formats\fP
+command line option but the documentation for the format is the
+definitive source of information on driver creation options.
+See \fI\%Raster drivers\fP format
+specific documentation for legal creation options for each format.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-if, \-\-input\-format <format>
+Format/driver name to be attempted to open the input file(s). It is generally
+not necessary to specify it, but it can be used to skip automatic driver
+detection, when it fails to select the appropriate driver.
+This option can be repeated several times to specify several candidate drivers.
+Note that it does not force those drivers to open the dataset. In particular,
+some drivers have requirements on file extensions.
+.sp
+May be repeated.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-oo, \-\-open\-option <NAME>=<VALUE>
+Dataset open option (format specific).
+.sp
+May be repeated.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-f, \-\-of, \-\-format, \-\-output\-format <OUTPUT\-FORMAT>
+Which output raster format to use. Allowed values may be given by
+\fBgdal \-\-formats | grep raster | grep rw | sort\fP
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-\-overwrite
+Allow program to overwrite existing target file or dataset.
+Otherwise, by default, \fBgdal\fP errors out if the target file or
+dataset already exists.
+.UNINDENT
+.INDENT 0.0
+.TP
+.B \-q, \-\-quiet
+Suppress progress bar and some warning messages.
+.UNINDENT
+.SH RETURN STATUS CODE
+.sp
+The program returns status code 0 in case of success, and non\-zero in case of
+error (non\-blocking errors emitted as warnings are considered as a successful
+execution).
+.SH EXAMPLES
+.SS Example 1: Converting file utm.tif to a cloud\-optimized GeoTIFF using JPEG compression
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+$ gdal raster convert \-\-format=COG \-\-co COMPRESS=JPEG utm.tif utm_cog.tif
+.EE
+.UNINDENT
+.UNINDENT
+.SS Example 2: Converting file utm.tif to GeoPackage raster
+.INDENT 0.0
+.INDENT 3.5
+.sp
+.EX
+$ gdal raster convert utm.tif utm.gpkg
+.EE
+.UNINDENT
+.UNINDENT
+.SH AUTHOR
+Even Rouault <even.rouault@spatialys.com>
+.SH COPYRIGHT
+1998-2026
+.\" Generated by docutils manpage writer.
+.