wasmtime 22.0.0 → 23.0.2

data/ext/cargo-vendor/wasmtime-22.0.0/src/runtime/vm/instance/allocator/pooling/memory_pool.rs

@@ -1,975 +0,0 @@
-//! Implements a memory pool using a single allocated memory slab.
-//!
-//! The pooling instance allocator maps one large slab of memory in advance and
-//! allocates WebAssembly memories from this slab--a [`MemoryPool`]. Each
-//! WebAssembly memory is allocated in its own slot (see uses of `index` and
-//! [`SlotId`] in this module):
-//!
-//! ```text
-//! ┌──────┬──────┬──────┬──────┬──────┐
-//! │Slot 0│Slot 1│Slot 2│Slot 3│......│
-//! └──────┴──────┴──────┴──────┴──────┘
-//! ```
-//!
-//! Diving deeper, we note that a [`MemoryPool`] protects Wasmtime from
-//! out-of-bounds memory accesses by inserting inaccessible guard regions
-//! between memory slots. These guard regions are configured to raise a signal
-//! if they are accessed--a WebAssembly out-of-bounds (OOB) memory access. The
-//! [`MemoryPool`] documentation has a more detailed chart but one can think of
-//! memory slots being laid out like the following:
-//!
-//! ```text
-//! ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
-//! │Guard│Mem 0│Guard│Mem 1│Guard│Mem 2│.....│Guard│
-//! └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
-//! ```
-//!
-//! But we can be more efficient about guard regions: with memory protection
-//! keys (MPK) enabled, the interleaved guard regions can be smaller. If we
-//! surround a memory with memories from other instances and each instance is
-//! protected by different protection keys, the guard region can be smaller AND
-//! the pool will still raise a signal on an OOB access. This complicates how we
-//! lay out memory slots: we must store memories from the same instance in the
-//! same "stripe". Each stripe is protected by a different protection key.
-//!
-//! This concept, dubbed [ColorGuard] in the original paper, relies on careful
-//! calculation of the memory sizes to prevent any "overlapping access" (see
-//! [`calculate`]): there are limited protection keys available (15) so the next
-//! memory using the same key must be at least as far away as the guard region
-//! we would insert otherwise. This ends up looking like the following, where a
-//! store for instance 0 (`I0`) "stripes" two memories (`M0` and `M1`) with the
-//! same protection key 1 and far enough apart to signal an OOB access:
-//!
-//! ```text
-//! ┌─────┬─────┬─────┬─────┬────────────────┬─────┬─────┬─────┐
-//! │.....│I0:M1│.....│.....│.<enough slots>.│I0:M2│.....│.....│
-//! ├─────┼─────┼─────┼─────┼────────────────┼─────┼─────┼─────┤
-//! │.....│key 1│key 2│key 3│..<more keys>...│key 1│key 2│.....│
-//! └─────┴─────┴─────┴─────┴────────────────┴─────┴─────┴─────┘
-//! ```
-//!
-//! [ColorGuard]: https://plas2022.github.io/files/pdf/SegueColorGuard.pdf
-
-use super::{
-    index_allocator::{MemoryInModule, ModuleAffinityIndexAllocator, SlotId},
-    MemoryAllocationIndex,
-};
-use crate::prelude::*;
-use crate::runtime::vm::mpk::{self, ProtectionKey, ProtectionMask};
-use crate::runtime::vm::{
-    CompiledModuleId, InstanceAllocationRequest, InstanceLimits, Memory, MemoryImageSlot, Mmap,
-    MpkEnabled, PoolingInstanceAllocatorConfig,
-};
-use anyhow::{anyhow, bail, Context, Result};
-use std::ffi::c_void;
-use std::sync::atomic::{AtomicUsize, Ordering};
-use std::sync::Mutex;
-use wasmtime_environ::{
-    DefinedMemoryIndex, MemoryPlan, MemoryStyle, Module, Tunables, WASM_PAGE_SIZE,
-};
-
-/// A set of allocator slots.
-///
-/// The allocated slots can be split by striping them: e.g., with two stripe
-/// colors 0 and 1, we would allocate all even slots using stripe 0 and all odd
-/// slots using stripe 1.
-///
-/// This is helpful for the use of protection keys: (a) if a request comes to
-/// allocate multiple instances, we can allocate them all from the same stripe
-/// and (b) if a store wants to allocate more from the same stripe it can.
-#[derive(Debug)]
-struct Stripe {
-    allocator: ModuleAffinityIndexAllocator,
-    pkey: Option<ProtectionKey>,
-}
-
-/// Represents a pool of WebAssembly linear memories.
-///
-/// A linear memory is divided into accessible pages and guard pages. A memory
-/// pool contains linear memories: each memory occupies a slot in an
-/// allocated slab (i.e., `mapping`):
-///
-/// ```text
-///          layout.max_memory_bytes                 layout.slot_bytes
-///                    |                                   |
-///              ◄─────┴────►                  ◄───────────┴──────────►
-/// ┌───────────┬────────────┬───────────┐     ┌───────────┬───────────┬───────────┐
-/// | PROT_NONE |            | PROT_NONE | ... |           | PROT_NONE | PROT_NONE |
-/// └───────────┴────────────┴───────────┘     └───────────┴───────────┴───────────┘
-/// |           |◄──────────────────┬─────────────────────────────────► ◄────┬────►
-/// |           |                   |                                        |
-/// mapping     |            `layout.num_slots` memories         layout.post_slab_guard_size
-///             |
-///   layout.pre_slab_guard_size
-/// ```
-#[derive(Debug)]
-pub struct MemoryPool {
-    mapping: Mmap,
-    /// This memory pool is stripe-aware. If using  memory protection keys, this
-    /// will contain one stripe per available key; otherwise, a single stripe
-    /// with an empty key.
-    stripes: Vec<Stripe>,
-
-    /// If using a copy-on-write allocation scheme, the slot management. We
-    /// dynamically transfer ownership of a slot to a Memory when in use.
-    image_slots: Vec<Mutex<Option<MemoryImageSlot>>>,
-
-    /// A description of the various memory sizes used in allocating the
-    /// `mapping` slab.
-    layout: SlabLayout,
-
-    /// The maximum number of memories that a single core module instance may
-    /// use.
-    ///
-    /// NB: this is needed for validation but does not affect the pool's size.
-    memories_per_instance: usize,
-
-    /// How much linear memory, in bytes, to keep resident after resetting for
-    /// use with the next instance. This much memory will be `memset` to zero
-    /// when a linear memory is deallocated.
-    ///
-    /// Memory exceeding this amount in the wasm linear memory will be released
-    /// with `madvise` back to the kernel.
-    ///
-    /// Only applicable on Linux.
-    pub(super) keep_resident: usize,
-
-    /// Keep track of protection keys handed out to initialized stores; this
-    /// allows us to round-robin the assignment of stores to stripes.
-    next_available_pkey: AtomicUsize,
-}
-
-impl MemoryPool {
-    /// Create a new `MemoryPool`.
-    pub fn new(config: &PoolingInstanceAllocatorConfig, tunables: &Tunables) -> Result<Self> {
-        if u64::try_from(config.limits.max_memory_size).unwrap()
-            > tunables.static_memory_reservation
-        {
-            bail!(
-                "maximum memory size of {:#x} bytes exceeds the configured \
-                 static memory reservation of {:#x} bytes",
-                config.limits.max_memory_size,
-                tunables.static_memory_reservation
-            );
-        }
-        let pkeys = match config.memory_protection_keys {
-            MpkEnabled::Auto => {
-                if mpk::is_supported() {
-                    mpk::keys(config.max_memory_protection_keys)
-                } else {
-                    &[]
-                }
-            }
-            MpkEnabled::Enable => {
-                if mpk::is_supported() {
-                    mpk::keys(config.max_memory_protection_keys)
-                } else {
-                    bail!("mpk is disabled on this system")
-                }
-            }
-            MpkEnabled::Disable => &[],
-        };
-
-        // This is a tricky bit of global state: when creating a memory pool
-        // that uses memory protection keys, we ensure here that any host code
-        // will have access to all keys (i.e., stripes). It's only when we enter
-        // the WebAssembly guest code (see `StoreInner::call_hook`) that we
-        // enforce which keys/stripes can be accessed. Be forewarned about the
-        // assumptions here:
-        // - we expect this "allow all" configuration to reset the default
-        //   process state (only allow key 0) _before_ any memories are accessed
-        // - and we expect no other code (e.g., host-side code) to modify this
-        //   global MPK configuration
-        if !pkeys.is_empty() {
-            mpk::allow(ProtectionMask::all());
-        }
-
-        // Create a slab layout and allocate it as a completely inaccessible
-        // region to start--`PROT_NONE`.
-        let constraints = SlabConstraints::new(&config.limits, tunables, pkeys.len())?;
-        let layout = calculate(&constraints)?;
-        log::debug!(
-            "creating memory pool: {constraints:?} -> {layout:?} (total: {})",
-            layout.total_slab_bytes()?
-        );
-        let mut mapping = Mmap::accessible_reserved(0, layout.total_slab_bytes()?)
-            .context("failed to create memory pool mapping")?;
-
-        // Then, stripe the memory with the available protection keys. This is
-        // unnecessary if there is only one stripe color.
-        if layout.num_stripes >= 2 {
-            let mut cursor = layout.pre_slab_guard_bytes;
-            let pkeys = &pkeys[..layout.num_stripes];
-            for i in 0..constraints.num_slots {
-                let pkey = &pkeys[i % pkeys.len()];
-                let region = unsafe { mapping.slice_mut(cursor..cursor + layout.slot_bytes) };
-                pkey.protect(region)?;
-                cursor += layout.slot_bytes;
-            }
-            debug_assert_eq!(
-                cursor + layout.post_slab_guard_bytes,
-                layout.total_slab_bytes()?
-            );
-        }
-
-        let image_slots: Vec<_> = std::iter::repeat_with(|| Mutex::new(None))
-            .take(constraints.num_slots)
-            .collect();
-
-        let create_stripe = |i| {
-            let num_slots = constraints.num_slots / layout.num_stripes
-                + usize::from(constraints.num_slots % layout.num_stripes > i);
-            let allocator = ModuleAffinityIndexAllocator::new(
-                num_slots.try_into().unwrap(),
-                config.max_unused_warm_slots,
-            );
-            Stripe {
-                allocator,
-                pkey: pkeys.get(i).cloned(),
-            }
-        };
-
-        debug_assert!(layout.num_stripes > 0);
-        let stripes: Vec<_> = (0..layout.num_stripes)
-            .into_iter()
-            .map(create_stripe)
-            .collect();
-
-        let pool = Self {
-            stripes,
-            mapping,
-            image_slots,
-            layout,
-            memories_per_instance: usize::try_from(config.limits.max_memories_per_module).unwrap(),
-            keep_resident: config.linear_memory_keep_resident,
-            next_available_pkey: AtomicUsize::new(0),
-        };
-
-        Ok(pool)
-    }
-
-    /// Return a protection key that stores can use for requesting new
-    pub fn next_available_pkey(&self) -> Option<ProtectionKey> {
-        let index = self.next_available_pkey.fetch_add(1, Ordering::SeqCst) % self.stripes.len();
-        debug_assert!(
-            self.stripes.len() < 2 || self.stripes[index].pkey.is_some(),
-            "if we are using stripes, we cannot have an empty protection key"
-        );
-        self.stripes[index].pkey.clone()
-    }
-
-    /// Validate whether this memory pool supports the given module.
-    pub fn validate(&self, module: &Module) -> Result<()> {
-        let memories = module.memory_plans.len() - module.num_imported_memories;
-        if memories > usize::try_from(self.memories_per_instance).unwrap() {
-            bail!(
-                "defined memories count of {} exceeds the per-instance limit of {}",
-                memories,
-                self.memories_per_instance,
-            );
-        }
-
-        let max_memory_pages = self.layout.max_memory_bytes / WASM_PAGE_SIZE as usize;
-        for (i, plan) in module
-            .memory_plans
-            .iter()
-            .skip(module.num_imported_memories)
-        {
-            match plan.style {
-                MemoryStyle::Static { byte_reservation } => {
-                    if u64::try_from(self.layout.bytes_to_next_stripe_slot()).unwrap()
-                        < byte_reservation
-                    {
-                        bail!(
-                            "memory size allocated per-memory is too small to \
-                             satisfy static bound of {byte_reservation:#x} bytes"
-                        );
-                    }
-                }
-                MemoryStyle::Dynamic { .. } => {}
-            }
-            if plan.memory.minimum > u64::try_from(max_memory_pages).unwrap() {
-                bail!(
-                    "memory index {} has a minimum page size of {} which exceeds the limit of {}",
-                    i.as_u32(),
-                    plan.memory.minimum,
-                    max_memory_pages,
-                );
-            }
-        }
-        Ok(())
-    }
-
-    /// Are zero slots in use right now?
-    #[allow(unused)] // some cfgs don't use this
-    pub fn is_empty(&self) -> bool {
-        self.stripes.iter().all(|s| s.allocator.is_empty())
-    }
-
-    /// Allocate a single memory for the given instance allocation request.
-    pub fn allocate(
-        &self,
-        request: &mut InstanceAllocationRequest,
-        memory_plan: &MemoryPlan,
-        memory_index: DefinedMemoryIndex,
-    ) -> Result<(MemoryAllocationIndex, Memory)> {
-        let stripe_index = if let Some(pkey) = &request.pkey {
-            pkey.as_stripe()
-        } else {
-            debug_assert!(self.stripes.len() < 2);
-            0
-        };
-
-        let striped_allocation_index = self.stripes[stripe_index]
-            .allocator
-            .alloc(
-                request
-                    .runtime_info
-                    .unique_id()
-                    .map(|id| MemoryInModule(id, memory_index)),
-            )
-            .map(|slot| StripedAllocationIndex(u32::try_from(slot.index()).unwrap()))
-            .ok_or_else(|| {
-                super::PoolConcurrencyLimitError::new(
-                    self.stripes[stripe_index].allocator.len(),
-                    format!("memory stripe {stripe_index}"),
-                )
-            })?;
-        let allocation_index =
-            striped_allocation_index.as_unstriped_slot_index(stripe_index, self.stripes.len());
-
-        match (|| {
-            // Double-check that the runtime requirements of the memory are
-            // satisfied by the configuration of this pooling allocator. This
-            // should be returned as an error through `validate_memory_plans`
-            // but double-check here to be sure.
-            match memory_plan.style {
-                MemoryStyle::Static { byte_reservation } => {
-                    assert!(
-                        byte_reservation
-                            <= u64::try_from(self.layout.bytes_to_next_stripe_slot()).unwrap()
-                    );
-                }
-                MemoryStyle::Dynamic { .. } => {}
-            }
-
-            let base_ptr = self.get_base(allocation_index);
-            let base_capacity = self.layout.max_memory_bytes;
-
-            let mut slot = self.take_memory_image_slot(allocation_index);
-            let image = request.runtime_info.memory_image(memory_index)?;
-            let initial_size = memory_plan.memory.minimum * WASM_PAGE_SIZE as u64;
-
-            // If instantiation fails, we can propagate the error
-            // upward and drop the slot. This will cause the Drop
-            // handler to attempt to map the range with PROT_NONE
-            // memory, to reserve the space while releasing any
-            // stale mappings. The next use of this slot will then
-            // create a new slot that will try to map over
-            // this, returning errors as well if the mapping
-            // errors persist. The unmap-on-drop is best effort;
-            // if it fails, then we can still soundly continue
-            // using the rest of the pool and allowing the rest of
-            // the process to continue, because we never perform a
-            // mmap that would leave an open space for someone
-            // else to come in and map something.
-            slot.instantiate(initial_size as usize, image, memory_plan)?;
-
-            Memory::new_static(
-                memory_plan,
-                base_ptr,
-                base_capacity,
-                slot,
-                self.layout.bytes_to_next_stripe_slot(),
-                unsafe { &mut *request.store.get().unwrap() },
-            )
-        })() {
-            Ok(memory) => Ok((allocation_index, memory)),
-            Err(e) => {
-                self.stripes[stripe_index]
-                    .allocator
-                    .free(SlotId(striped_allocation_index.0));
-                Err(e)
-            }
-        }
-    }
-
-    /// Deallocate a previously-allocated memory.
-    ///
-    /// # Safety
-    ///
-    /// The memory must have been previously allocated from this pool and
-    /// assigned the given index, must currently be in an allocated state, and
-    /// must never be used again.
-    ///
-    /// The caller must have already called `clear_and_remain_ready` on the
-    /// memory's image and flushed any enqueued decommits for this memory.
-    pub unsafe fn deallocate(
-        &self,
-        allocation_index: MemoryAllocationIndex,
-        image: MemoryImageSlot,
-    ) {
-        self.return_memory_image_slot(allocation_index, image);
-
-        let (stripe_index, striped_allocation_index) =
-            StripedAllocationIndex::from_unstriped_slot_index(allocation_index, self.stripes.len());
-        self.stripes[stripe_index]
-            .allocator
-            .free(SlotId(striped_allocation_index.0));
-    }
-
-    /// Purging everything related to `module`.
-    pub fn purge_module(&self, module: CompiledModuleId) {
-        // This primarily means clearing out all of its memory images present in
-        // the virtual address space. Go through the index allocator for slots
-        // affine to `module` and reset them, freeing up the index when we're
-        // done.
-        //
-        // Note that this is only called when the specified `module` won't be
-        // allocated further (the module is being dropped) so this shouldn't hit
-        // any sort of infinite loop since this should be the final operation
-        // working with `module`.
-        //
-        // TODO: We are given a module id, but key affinity by pair of module id
-        // and defined memory index. We are missing any defined memory index or
-        // count of how many memories the module defines here. Therefore, we
-        // probe up to the maximum number of memories per instance. This is fine
-        // because that maximum is generally relatively small. If this method
-        // somehow ever gets hot because of unnecessary probing, we should
-        // either pass in the actual number of defined memories for the given
-        // module to this method, or keep a side table of all slots that are
-        // associated with a module (not just module and memory). The latter
-        // would require care to make sure that its maintenance wouldn't be too
-        // expensive for normal allocation/free operations.
-        for stripe in &self.stripes {
-            for i in 0..self.memories_per_instance {
-                use wasmtime_environ::EntityRef;
-                let memory_index = DefinedMemoryIndex::new(i);
-                while let Some(id) = stripe
-                    .allocator
-                    .alloc_affine_and_clear_affinity(module, memory_index)
-                {
-                    // Clear the image from the slot and, if successful, return it back
-                    // to our state. Note that on failure here the whole slot will get
-                    // paved over with an anonymous mapping.
-                    let index = MemoryAllocationIndex(id.0);
-                    let mut slot = self.take_memory_image_slot(index);
-                    if slot.remove_image().is_ok() {
-                        self.return_memory_image_slot(index, slot);
-                    }
-
-                    stripe.allocator.free(id);
-                }
-            }
-        }
-    }
-
-    fn get_base(&self, allocation_index: MemoryAllocationIndex) -> *mut u8 {
-        assert!(allocation_index.index() < self.layout.num_slots);
-        let offset =
-            self.layout.pre_slab_guard_bytes + allocation_index.index() * self.layout.slot_bytes;
-        unsafe { self.mapping.as_ptr().offset(offset as isize).cast_mut() }
-    }
-
-    /// Take ownership of the given image slot. Must be returned via
-    /// `return_memory_image_slot` when the instance is done using it.
-    fn take_memory_image_slot(&self, allocation_index: MemoryAllocationIndex) -> MemoryImageSlot {
-        let maybe_slot = self.image_slots[allocation_index.index()]
-            .lock()
-            .unwrap()
-            .take();
-
-        maybe_slot.unwrap_or_else(|| {
-            MemoryImageSlot::create(
-                self.get_base(allocation_index) as *mut c_void,
-                0,
-                self.layout.max_memory_bytes,
-            )
-        })
-    }
-
-    /// Return ownership of the given image slot.
-    fn return_memory_image_slot(
-        &self,
-        allocation_index: MemoryAllocationIndex,
-        slot: MemoryImageSlot,
-    ) {
-        assert!(!slot.is_dirty());
-        *self.image_slots[allocation_index.index()].lock().unwrap() = Some(slot);
-    }
-}
-
-impl Drop for MemoryPool {
-    fn drop(&mut self) {
-        // Clear the `clear_no_drop` flag (i.e., ask to *not* clear on
-        // drop) for all slots, and then drop them here. This is
-        // valid because the one `Mmap` that covers the whole region
-        // can just do its one munmap.
-        for mut slot in std::mem::take(&mut self.image_slots) {
-            if let Some(slot) = slot.get_mut().unwrap() {
-                slot.no_clear_on_drop();
-            }
-        }
-    }
-}
-
-/// The index of a memory allocation within an `InstanceAllocator`.
-#[derive(Clone, Copy, Debug, Eq, PartialEq, PartialOrd, Ord)]
-pub struct StripedAllocationIndex(u32);
-
-impl StripedAllocationIndex {
-    fn from_unstriped_slot_index(
-        index: MemoryAllocationIndex,
-        num_stripes: usize,
-    ) -> (usize, Self) {
-        let stripe_index = index.index() % num_stripes;
-        let num_stripes: u32 = num_stripes.try_into().unwrap();
-        let index_within_stripe = Self(index.0 / num_stripes);
-        (stripe_index, index_within_stripe)
-    }
-
-    fn as_unstriped_slot_index(self, stripe: usize, num_stripes: usize) -> MemoryAllocationIndex {
-        let num_stripes: u32 = num_stripes.try_into().unwrap();
-        let stripe: u32 = stripe.try_into().unwrap();
-        MemoryAllocationIndex(self.0 * num_stripes + stripe)
-    }
-}
-
-#[derive(Clone, Debug)]
-struct SlabConstraints {
-    /// Essentially, the `static_memory_bound`: this is an assumption that the
-    /// runtime and JIT compiler make about how much space will be guarded
-    /// between slots.
-    expected_slot_bytes: usize,
-    /// The maximum size of any memory in the pool.
-    max_memory_bytes: usize,
-    num_slots: usize,
-    num_pkeys_available: usize,
-    guard_bytes: usize,
-    guard_before_slots: bool,
-}
-
-impl SlabConstraints {
-    fn new(
-        limits: &InstanceLimits,
-        tunables: &Tunables,
-        num_pkeys_available: usize,
-    ) -> Result<Self> {
-        // `static_memory_bound` is the configured number of Wasm pages for a
-        // static memory slot (see `Config::static_memory_maximum_size`); even
-        // if the memory never grows to this size (e.g., it has a lower memory
-        // maximum), codegen will assume that this unused memory is mapped
-        // `PROT_NONE`. Typically `static_memory_bound` is 4G which helps elide
-        // most bounds checks. `MemoryPool` must respect this bound, though not
-        // explicitly: if we can achieve the same effect via MPK-protected
-        // stripes, the slot size can be lower than the `static_memory_bound`.
-        let expected_slot_bytes = tunables.static_memory_reservation;
-
-        let constraints = SlabConstraints {
-            max_memory_bytes: limits.max_memory_size,
-            num_slots: limits
-                .total_memories
-                .try_into()
-                .context("too many memories")?,
-            expected_slot_bytes: expected_slot_bytes
-                .try_into()
-                .context("static memory bound is too large")?,
-            num_pkeys_available,
-            guard_bytes: tunables
-                .static_memory_offset_guard_size
-                .try_into()
-                .context("guard region is too large")?,
-            guard_before_slots: tunables.guard_before_linear_memory,
-        };
-        Ok(constraints)
-    }
-}
-
-#[derive(Debug)]
-struct SlabLayout {
-    /// The total number of slots available in the memory pool slab.
-    num_slots: usize,
-    /// The size of each slot in the memory pool; this contains the maximum
-    /// memory size (i.e., from WebAssembly or Wasmtime configuration) plus any
-    /// guard region after the memory to catch OOB access. On these guard
-    /// regions, note that:
-    /// - users can configure how aggressively (or not) to elide bounds checks
-    ///   via `Config::static_memory_guard_size` (see also:
-    ///   `memory_and_guard_size`)
-    /// - memory protection keys can compress the size of the guard region by
-    ///   placing slots from a different key (i.e., a stripe) in the guard
-    ///   region; this means the slot itself can be smaller and we can allocate
-    ///   more of them.
-    slot_bytes: usize,
-    /// The maximum size that can become accessible, in bytes, for each linear
-    /// memory. Guaranteed to be a whole number of Wasm pages.
-    max_memory_bytes: usize,
-    /// If necessary, the number of bytes to reserve as a guard region at the
-    /// beginning of the slab.
-    pre_slab_guard_bytes: usize,
-    /// Like `pre_slab_guard_bytes`, but at the end of the slab.
-    post_slab_guard_bytes: usize,
-    /// The number of stripes needed in the slab layout.
-    num_stripes: usize,
-}
-
-impl SlabLayout {
-    /// Return the total size of the slab, using the final layout (where `n =
-    /// num_slots`):
-    ///
-    /// ```text
-    /// ┌────────────────────┬──────┬──────┬───┬──────┬─────────────────────┐
-    /// │pre_slab_guard_bytes│slot 1│slot 2│...│slot n│post_slab_guard_bytes│
-    /// └────────────────────┴──────┴──────┴───┴──────┴─────────────────────┘
-    /// ```
-    fn total_slab_bytes(&self) -> Result<usize> {
-        self.slot_bytes
-            .checked_mul(self.num_slots)
-            .and_then(|c| c.checked_add(self.pre_slab_guard_bytes))
-            .and_then(|c| c.checked_add(self.post_slab_guard_bytes))
-            .ok_or_else(|| anyhow!("total size of memory reservation exceeds addressable memory"))
-    }
-
-    /// Returns the number of Wasm bytes from the beginning of one slot to the
-    /// next slot in the same stripe--this is the striped equivalent of
-    /// `static_memory_bound`. Recall that between slots of the same stripe we
-    /// will see a slot from every other stripe.
-    ///
-    /// For example, in a 3-stripe pool, this function measures the distance
-    /// from the beginning of slot 1 to slot 4, which are of the same stripe:
-    ///
-    /// ```text
-    ///  ◄────────────────────►
-    /// ┌────────┬──────┬──────┬────────┬───┐
-    /// │*slot 1*│slot 2│slot 3│*slot 4*│...|
-    /// └────────┴──────┴──────┴────────┴───┘
-    /// ```
-    fn bytes_to_next_stripe_slot(&self) -> usize {
-        self.slot_bytes * self.num_stripes
-    }
-}
-
-fn calculate(constraints: &SlabConstraints) -> Result<SlabLayout> {
-    let SlabConstraints {
-        max_memory_bytes,
-        num_slots,
-        expected_slot_bytes,
-        num_pkeys_available,
-        guard_bytes,
-        guard_before_slots,
-    } = *constraints;
-
-    // If the user specifies a guard region, we always need to allocate a
-    // `PROT_NONE` region for it before any memory slots. Recall that we can
-    // avoid bounds checks for loads and stores with immediates up to
-    // `guard_bytes`, but we rely on Wasmtime to emit bounds checks for any
-    // accesses greater than this.
-    let pre_slab_guard_bytes = if guard_before_slots { guard_bytes } else { 0 };
-
-    // To calculate the slot size, we start with the default configured size and
-    // attempt to chip away at this via MPK protection. Note here how we begin
-    // to define a slot as "all of the memory and guard region."
-    let faulting_region_bytes = expected_slot_bytes
-        .max(max_memory_bytes)
-        .saturating_add(guard_bytes);
-
-    let (num_stripes, slot_bytes) = if guard_bytes == 0 || max_memory_bytes == 0 || num_slots == 0 {
-        // In the uncommon case where the memory/guard regions are empty or we don't need any slots , we
-        // will not need any stripes: we just lay out the slots back-to-back
-        // using a single stripe.
-        (1, faulting_region_bytes)
-    } else if num_pkeys_available < 2 {
-        // If we do not have enough protection keys to stripe the memory, we do
-        // the same. We can't elide any of the guard bytes because we aren't
-        // overlapping guard regions with other stripes...
-        (1, faulting_region_bytes)
-    } else {
-        // ...but if we can create at least two stripes, we can use another
-        // stripe (i.e., a different pkey) as this slot's guard region--this
-        // reduces the guard bytes each slot has to allocate. We must make
-        // sure, though, that if the size of that other stripe(s) does not
-        // fully cover `guard_bytes`, we keep those around to prevent OOB
-        // access.
-
-        // We first calculate the number of stripes we need: we want to
-        // minimize this so that there is less chance of a single store
-        // running out of slots with its stripe--we need at least two,
-        // though. But this is not just an optimization; we need to handle
-        // the case when there are fewer slots than stripes. E.g., if our
-        // pool is configured with only three slots (`num_memory_slots =
-        // 3`), we will run into failures if we attempt to set up more than
-        // three stripes.
-        let needed_num_stripes = faulting_region_bytes / max_memory_bytes
-            + usize::from(faulting_region_bytes % max_memory_bytes != 0);
-        assert!(needed_num_stripes > 0);
-        let num_stripes = num_pkeys_available.min(needed_num_stripes).min(num_slots);
-
-        // Next, we try to reduce the slot size by "overlapping" the stripes: we
-        // can make slot `n` smaller since we know that slot `n+1` and following
-        // are in different stripes and will look just like `PROT_NONE` memory.
-        // Recall that codegen expects a guarantee that at least
-        // `faulting_region_bytes` will catch OOB accesses via segfaults.
-        let needed_slot_bytes = faulting_region_bytes
-            .checked_div(num_stripes)
-            .unwrap_or(faulting_region_bytes)
-            .max(max_memory_bytes);
-        assert!(needed_slot_bytes >= max_memory_bytes);
-
-        (num_stripes, needed_slot_bytes)
-    };
-
-    // The page-aligned slot size; equivalent to `memory_and_guard_size`.
-    let page_alignment = crate::runtime::vm::page_size() - 1;
-    let slot_bytes = slot_bytes
-        .checked_add(page_alignment)
-        .and_then(|slot_bytes| Some(slot_bytes & !page_alignment))
-        .ok_or_else(|| anyhow!("slot size is too large"))?;
-
-    // We may need another guard region (like `pre_slab_guard_bytes`) at the end
-    // of our slab to maintain our `faulting_region_bytes` guarantee. We could
-    // be conservative and just create it as large as `faulting_region_bytes`,
-    // but because we know that the last slot's `slot_bytes` make up the first
-    // part of that region, we reduce the final guard region by that much.
-    let post_slab_guard_bytes = faulting_region_bytes.saturating_sub(slot_bytes);
-
-    // Check that we haven't exceeded the slab we can calculate given the limits
-    // of `usize`.
-    let layout = SlabLayout {
-        num_slots,
-        slot_bytes,
-        max_memory_bytes,
-        pre_slab_guard_bytes,
-        post_slab_guard_bytes,
-        num_stripes,
-    };
-    match layout.total_slab_bytes() {
-        Ok(_) => Ok(layout),
-        Err(e) => Err(e),
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::*;
-    use proptest::prelude::*;
-
-    #[cfg(target_pointer_width = "64")]
-    #[test]
-    fn test_memory_pool() -> Result<()> {
-        let pool = MemoryPool::new(
-            &PoolingInstanceAllocatorConfig {
-                limits: InstanceLimits {
-                    total_memories: 5,
-                    max_tables_per_module: 0,
-                    max_memories_per_module: 3,
-                    table_elements: 0,
-                    max_memory_size: WASM_PAGE_SIZE as usize,
-                    ..Default::default()
-                },
-                ..Default::default()
-            },
-            &Tunables {
-                static_memory_reservation: WASM_PAGE_SIZE as u64,
-                static_memory_offset_guard_size: 0,
-                ..Tunables::default_host()
-            },
-        )?;
-
-        assert_eq!(pool.layout.slot_bytes, WASM_PAGE_SIZE as usize);
-        assert_eq!(pool.layout.num_slots, 5);
-        assert_eq!(pool.layout.max_memory_bytes, WASM_PAGE_SIZE as usize);
-
-        let base = pool.mapping.as_ptr() as usize;
-
-        for i in 0..5 {
-            let index = MemoryAllocationIndex(i);
-            let ptr = pool.get_base(index);
-            assert_eq!(ptr as usize - base, i as usize * pool.layout.slot_bytes);
-        }
-
-        Ok(())
-    }
-
-    #[test]
-    #[cfg_attr(miri, ignore)]
-    fn test_pooling_allocator_striping() {
-        if !mpk::is_supported() {
-            println!("skipping `test_pooling_allocator_striping` test; mpk is not supported");
-            return;
-        }
-
-        // Force the use of MPK.
-        let config = PoolingInstanceAllocatorConfig {
-            memory_protection_keys: MpkEnabled::Enable,
-            ..PoolingInstanceAllocatorConfig::default()
-        };
-        let pool = MemoryPool::new(&config, &Tunables::default_host()).unwrap();
-        assert!(pool.stripes.len() >= 2);
-
-        let max_memory_slots = config.limits.total_memories;
-        dbg!(pool.stripes[0].allocator.num_empty_slots());
-        dbg!(pool.stripes[1].allocator.num_empty_slots());
-        let available_memory_slots: usize = pool
-            .stripes
-            .iter()
-            .map(|s| s.allocator.num_empty_slots())
-            .sum();
-        assert_eq!(
-            max_memory_slots,
-            u32::try_from(available_memory_slots).unwrap()
-        );
-    }
-
-    #[test]
-    fn check_known_layout_calculations() {
-        for num_pkeys_available in 0..16 {
-            for num_memory_slots in [0, 1, 10, 64] {
-                for expected_slot_bytes in [0, 1 << 30 /* 1GB */, 4 << 30 /* 4GB */] {
-                    for max_memory_bytes in
-                        [0, 1 * WASM_PAGE_SIZE as usize, 10 * WASM_PAGE_SIZE as usize]
-                    {
-                        for guard_bytes in [0, 2 << 30 /* 2GB */] {
-                            for guard_before_slots in [true, false] {
-                                let constraints = SlabConstraints {
-                                    max_memory_bytes,
-                                    num_slots: num_memory_slots,
-                                    expected_slot_bytes,
-                                    num_pkeys_available,
-                                    guard_bytes,
-                                    guard_before_slots,
-                                };
-                                let layout = calculate(&constraints);
-                                assert_slab_layout_invariants(constraints, layout.unwrap());
-                            }
-                        }
-                    }
-                }
-            }
-        }
-    }
-
-    proptest! {
-        #[test]
-        #[cfg_attr(miri, ignore)]
-        fn check_random_layout_calculations(c in constraints()) {
-            if let Ok(l) = calculate(&c) {
-                assert_slab_layout_invariants(c, l);
-            }
-        }
-    }
-
-    fn constraints() -> impl Strategy<Value = SlabConstraints> {
-        (
-            any::<usize>(),
-            any::<usize>(),
-            any::<usize>(),
-            any::<usize>(),
-            any::<usize>(),
-            any::<bool>(),
-        )
-            .prop_map(
-                |(
-                    max_memory_bytes,
-                    num_memory_slots,
-                    expected_slot_bytes,
-                    num_pkeys_available,
-                    guard_bytes,
-                    guard_before_slots,
-                )| {
-                    SlabConstraints {
-                        max_memory_bytes,
-                        num_slots: num_memory_slots,
-                        expected_slot_bytes,
-                        num_pkeys_available,
-                        guard_bytes,
-                        guard_before_slots,
-                    }
-                },
-            )
-    }
-
-    fn assert_slab_layout_invariants(c: SlabConstraints, s: SlabLayout) {
-        // Check that all the sizes add up.
-        assert_eq!(
-            s.total_slab_bytes().unwrap(),
-            s.pre_slab_guard_bytes + s.slot_bytes * c.num_slots + s.post_slab_guard_bytes,
-            "the slab size does not add up: {c:?} => {s:?}"
-        );
-        assert!(
-            s.slot_bytes >= s.max_memory_bytes,
-            "slot is not big enough: {c:?} => {s:?}"
-        );
-
-        // Check that the various memory values are page-aligned.
-        assert!(
-            is_aligned(s.slot_bytes),
-            "slot is not page-aligned: {c:?} => {s:?}",
-        );
-        assert!(
-            is_aligned(s.max_memory_bytes),
-            "slot guard region is not page-aligned: {c:?} => {s:?}",
-        );
-        assert!(
-            is_aligned(s.pre_slab_guard_bytes),
-            "pre-slab guard region is not page-aligned: {c:?} => {s:?}"
-        );
-        assert!(
-            is_aligned(s.post_slab_guard_bytes),
-            "post-slab guard region is not page-aligned: {c:?} => {s:?}"
-        );
-        assert!(
-            is_aligned(s.total_slab_bytes().unwrap()),
-            "slab is not page-aligned: {c:?} => {s:?}"
-        );
-
-        // Check that we use no more or less stripes than needed.
-        assert!(s.num_stripes >= 1, "not enough stripes: {c:?} => {s:?}");
-        if c.num_pkeys_available == 0 || c.num_slots == 0 {
-            assert_eq!(
-                s.num_stripes, 1,
-                "expected at least one stripe: {c:?} => {s:?}"
-            );
-        } else {
-            assert!(
-                s.num_stripes <= c.num_pkeys_available,
-                "layout has more stripes than available pkeys: {c:?} => {s:?}"
-            );
-            assert!(
-                s.num_stripes <= c.num_slots,
-                "layout has more stripes than memory slots: {c:?} => {s:?}"
-            );
-        }
-
-        // Check that we use the minimum number of stripes/protection keys.
-        // - if the next MPK-protected slot is bigger or the same as the
-        //   required guard region, we only need two stripes
-        // - if the next slot is smaller than the guard region, we only need
-        //   enough stripes to add up to at least that guard region size.
-        if c.num_pkeys_available > 1 && c.max_memory_bytes > 0 {
-            assert!(
-                s.num_stripes <= (c.guard_bytes / c.max_memory_bytes) + 2,
-                "calculated more stripes than needed: {c:?} => {s:?}"
-            );
-        }
-
-        // Check that the memory-striping will not allow OOB access.
-        // - we may have reduced the slot size from `expected_slot_bytes` to
-        //   `slot_bytes` assuming MPK striping; we check that our guaranteed
-        //   "faulting region" is respected
-        // - the last slot won't have MPK striping after it; we check that the
-        //   `post_slab_guard_bytes` accounts for this
-        assert!(
-            s.bytes_to_next_stripe_slot()
-                >= c.expected_slot_bytes.max(c.max_memory_bytes) + c.guard_bytes,
-            "faulting region not large enough: {c:?} => {s:?}"
-        );
-        assert!(
-            s.slot_bytes + s.post_slab_guard_bytes >= c.expected_slot_bytes,
-            "last slot may allow OOB access: {c:?} => {s:?}"
-        );
-    }
-
-    fn is_aligned(bytes: usize) -> bool {
-        bytes % crate::runtime::vm::page_size() == 0
-    }
-}