wasmtime 22.0.0 → 23.0.2

data/ext/cargo-vendor/wasmtime-22.0.0/src/runtime/vm/cow.rs

@@ -1,972 +0,0 @@
-//! Copy-on-write initialization support: creation of backing images for
-//! modules, and logic to support mapping these backing images into memory.
-
-use crate::prelude::*;
-use crate::runtime::vm::sys::vm::{self, MemoryImageSource};
-use crate::runtime::vm::{MmapVec, SendSyncPtr};
-use alloc::sync::Arc;
-use anyhow::Result;
-use core::ffi::c_void;
-use core::ops::Range;
-use core::ptr::{self, NonNull};
-use wasmtime_environ::{
-    DefinedMemoryIndex, MemoryInitialization, MemoryPlan, MemoryStyle, Module, PrimaryMap,
-};
-
-use super::sys::DecommitBehavior;
-
-/// Backing images for memories in a module.
-///
-/// This is meant to be built once, when a module is first loaded/constructed,
-/// and then used many times for instantiation.
-pub struct ModuleMemoryImages {
-    memories: PrimaryMap<DefinedMemoryIndex, Option<Arc<MemoryImage>>>,
-}
-
-impl ModuleMemoryImages {
-    /// Get the MemoryImage for a given memory.
-    pub fn get_memory_image(&self, defined_index: DefinedMemoryIndex) -> Option<&Arc<MemoryImage>> {
-        self.memories[defined_index].as_ref()
-    }
-}
-
-/// One backing image for one memory.
-#[derive(Debug, PartialEq)]
-pub struct MemoryImage {
-    /// The platform-specific source of this image.
-    ///
-    /// This might be a mapped `*.cwasm` file or on Unix it could also be a
-    /// `Memfd` as an anonymous file in memory on Linux. In either case this is
-    /// used as the backing-source for the CoW image.
-    source: MemoryImageSource,
-
-    /// Length of image, in bytes.
-    ///
-    /// Note that initial memory size may be larger; leading and trailing zeroes
-    /// are truncated (handled by backing fd).
-    ///
-    /// Must be a multiple of the system page size.
-    len: usize,
-
-    /// Image starts this many bytes into `source`.
-    ///
-    /// This is 0 for anonymous-backed memfd files and is the offset of the
-    /// data section in a `*.cwasm` file for `*.cwasm`-backed images.
-    ///
-    /// Must be a multiple of the system page size.
-    source_offset: u64,
-
-    /// Image starts this many bytes into heap space.
-    ///
-    /// Must be a multiple of the system page size.
-    linear_memory_offset: usize,
-}
-
-impl MemoryImage {
-    fn new(
-        page_size: u32,
-        offset: u64,
-        data: &[u8],
-        mmap: Option<&MmapVec>,
-    ) -> Result<Option<MemoryImage>> {
-        // Sanity-check that various parameters are page-aligned.
-        let len = data.len();
-        assert_eq!(offset % u64::from(page_size), 0);
-        assert_eq!((len as u32) % page_size, 0);
-        let linear_memory_offset = match usize::try_from(offset) {
-            Ok(offset) => offset,
-            Err(_) => return Ok(None),
-        };
-
-        // If a backing `mmap` is present then `data` should be a sub-slice of
-        // the `mmap`. The sanity-checks here double-check that. Additionally
-        // compilation should have ensured that the `data` section is
-        // page-aligned within `mmap`, so that's also all double-checked here.
-        //
-        // Finally if the `mmap` itself comes from a backing file on disk, such
-        // as a `*.cwasm` file, then that's a valid source of data for the
-        // memory image so we simply return referencing that.
-        //
-        // Note that this path is platform-agnostic in the sense of all
-        // platforms we support support memory mapping copy-on-write data from
-        // files, but for now this is still a Linux-specific region of Wasmtime.
-        // Some work will be needed to get this file compiling for macOS and
-        // Windows.
-        if let Some(mmap) = mmap {
-            let start = mmap.as_ptr() as usize;
-            let end = start + mmap.len();
-            let data_start = data.as_ptr() as usize;
-            let data_end = data_start + data.len();
-            assert!(start <= data_start && data_end <= end);
-            assert_eq!((start as u32) % page_size, 0);
-            assert_eq!((data_start as u32) % page_size, 0);
-            assert_eq!((data_end as u32) % page_size, 0);
-            assert_eq!((mmap.original_offset() as u32) % page_size, 0);
-
-            #[cfg(feature = "std")]
-            if let Some(file) = mmap.original_file() {
-                if let Some(source) = MemoryImageSource::from_file(file) {
-                    return Ok(Some(MemoryImage {
-                        source,
-                        source_offset: u64::try_from(mmap.original_offset() + (data_start - start))
-                            .unwrap(),
-                        linear_memory_offset,
-                        len,
-                    }));
-                }
-            }
-        }
-
-        // If `mmap` doesn't come from a file then platform-specific mechanisms
-        // may be used to place the data in a form that's amenable to an mmap.
-        if let Some(source) = MemoryImageSource::from_data(data).err2anyhow()? {
-            return Ok(Some(MemoryImage {
-                source,
-                source_offset: 0,
-                linear_memory_offset,
-                len,
-            }));
-        }
-
-        Ok(None)
-    }
-
-    unsafe fn map_at(&self, base: *mut u8) -> Result<()> {
-        self.source
-            .map_at(
-                base.add(self.linear_memory_offset),
-                self.len,
-                self.source_offset,
-            )
-            .err2anyhow()?;
-        Ok(())
-    }
-
-    unsafe fn remap_as_zeros_at(&self, base: *mut u8) -> Result<()> {
-        self.source
-            .remap_as_zeros_at(base.add(self.linear_memory_offset), self.len)
-            .err2anyhow()?;
-        Ok(())
-    }
-}
-
-impl ModuleMemoryImages {
-    /// Create a new `ModuleMemoryImages` for the given module. This can be
-    /// passed in as part of a `InstanceAllocationRequest` to speed up
-    /// instantiation and execution by using copy-on-write-backed memories.
-    pub fn new(
-        module: &Module,
-        wasm_data: &[u8],
-        mmap: Option<&MmapVec>,
-    ) -> Result<Option<ModuleMemoryImages>> {
-        let map = match &module.memory_initialization {
-            MemoryInitialization::Static { map } => map,
-            _ => return Ok(None),
-        };
-        let mut memories = PrimaryMap::with_capacity(map.len());
-        let page_size = crate::runtime::vm::page_size() as u32;
-        for (memory_index, init) in map {
-            // mmap-based-initialization only works for defined memories with a
-            // known starting point of all zeros, so bail out if the mmeory is
-            // imported.
-            let defined_memory = match module.defined_memory_index(memory_index) {
-                Some(idx) => idx,
-                None => return Ok(None),
-            };
-
-            // If there's no initialization for this memory known then we don't
-            // need an image for the memory so push `None` and move on.
-            let init = match init {
-                Some(init) => init,
-                None => {
-                    memories.push(None);
-                    continue;
-                }
-            };
-
-            // Get the image for this wasm module  as a subslice of `wasm_data`,
-            // and then use that to try to create the `MemoryImage`. If this
-            // creation files then we fail creating `ModuleMemoryImages` since this
-            // memory couldn't be represented.
-            let data = &wasm_data[init.data.start as usize..init.data.end as usize];
-            let image = match MemoryImage::new(page_size, init.offset, data, mmap)? {
-                Some(image) => image,
-                None => return Ok(None),
-            };
-
-            let idx = memories.push(Some(Arc::new(image)));
-            assert_eq!(idx, defined_memory);
-        }
-
-        Ok(Some(ModuleMemoryImages { memories }))
-    }
-}
-
-/// Slot management of a copy-on-write image which can be reused for the pooling
-/// allocator.
-///
-/// This data structure manages a slot of linear memory, primarily in the
-/// pooling allocator, which optionally has a contiguous memory image in the
-/// middle of it. Pictorially this data structure manages a virtual memory
-/// region that looks like:
-///
-/// ```text
-///   +--------------------+-------------------+--------------+--------------+
-///   |   anonymous        |      optional     |   anonymous  |    PROT_NONE |
-///   |     zero           |       memory      |     zero     |     memory   |
-///   |    memory          |       image       |    memory    |              |
-///   +--------------------+-------------------+--------------+--------------+
-///   |                     <------+---------->
-///   |<-----+------------>         \
-///   |      \                   image.len
-///   |       \
-///   |  image.linear_memory_offset
-///   |
-///   \
-///  self.base is this virtual address
-///
-///    <------------------+------------------------------------------------>
-///                        \
-///                      static_size
-///
-///    <------------------+---------------------------------->
-///                        \
-///                      accessible
-/// ```
-///
-/// When a `MemoryImageSlot` is created it's told what the `static_size` and
-/// `accessible` limits are. Initially there is assumed to be no image in linear
-/// memory.
-///
-/// When `MemoryImageSlot::instantiate` is called then the method will perform
-/// a "synchronization" to take the image from its prior state to the new state
-/// for the image specified. The first instantiation for example will mmap the
-/// heap image into place. Upon reuse of a slot nothing happens except possibly
-/// shrinking `self.accessible`. When a new image is used then the old image is
-/// mapped to anonymous zero memory and then the new image is mapped in place.
-///
-/// A `MemoryImageSlot` is either `dirty` or it isn't. When a `MemoryImageSlot`
-/// is dirty then it is assumed that any memory beneath `self.accessible` could
-/// have any value. Instantiation cannot happen into a `dirty` slot, however, so
-/// the `MemoryImageSlot::clear_and_remain_ready` returns this memory back to
-/// its original state to mark `dirty = false`. This is done by resetting all
-/// anonymous memory back to zero and the image itself back to its initial
-/// contents.
-///
-/// On Linux this is achieved with the `madvise(MADV_DONTNEED)` syscall. This
-/// syscall will release the physical pages back to the OS but retain the
-/// original mappings, effectively resetting everything back to its initial
-/// state. Non-linux platforms will replace all memory below `self.accessible`
-/// with a fresh zero'd mmap, meaning that reuse is effectively not supported.
-#[derive(Debug)]
-pub struct MemoryImageSlot {
-    /// The base address in virtual memory of the actual heap memory.
-    ///
-    /// Bytes at this address are what is seen by the Wasm guest code.
-    base: SendSyncPtr<u8>,
-
-    /// The maximum static memory size which `self.accessible` can grow to.
-    static_size: usize,
-
-    /// An optional image that is currently being used in this linear memory.
-    ///
-    /// This can be `None` in which case memory is originally all zeros. When
-    /// `Some` the image describes where it's located within the image.
-    image: Option<Arc<MemoryImage>>,
-
-    /// The size of the heap that is readable and writable.
-    ///
-    /// Note that this may extend beyond the actual linear memory heap size in
-    /// the case of dynamic memories in use. Memory accesses to memory below
-    /// `self.accessible` may still page fault as pages are lazily brought in
-    /// but the faults will always be resolved by the kernel.
-    accessible: usize,
-
-    /// Whether this slot may have "dirty" pages (pages written by an
-    /// instantiation). Set by `instantiate()` and cleared by
-    /// `clear_and_remain_ready()`, and used in assertions to ensure
-    /// those methods are called properly.
-    ///
-    /// Invariant: if !dirty, then this memory slot contains a clean
-    /// CoW mapping of `image`, if `Some(..)`, and anonymous-zero
-    /// memory beyond the image up to `static_size`. The addresses
-    /// from offset 0 to `self.accessible` are R+W and set to zero or the
-    /// initial image content, as appropriate. Everything between
-    /// `self.accessible` and `self.static_size` is inaccessible.
-    dirty: bool,
-
-    /// Whether this MemoryImageSlot is responsible for mapping anonymous
-    /// memory (to hold the reservation while overwriting mappings
-    /// specific to this slot) in place when it is dropped. Default
-    /// on, unless the caller knows what they are doing.
-    clear_on_drop: bool,
-}
-
-impl MemoryImageSlot {
-    /// Create a new MemoryImageSlot. Assumes that there is an anonymous
-    /// mmap backing in the given range to start.
-    ///
-    /// The `accessible` parameter describes how much of linear memory is
-    /// already mapped as R/W with all zero-bytes. The `static_size` value is
-    /// the maximum size of this image which `accessible` cannot grow beyond,
-    /// and all memory from `accessible` from `static_size` should be mapped as
-    /// `PROT_NONE` backed by zero-bytes.
-    pub(crate) fn create(base_addr: *mut c_void, accessible: usize, static_size: usize) -> Self {
-        MemoryImageSlot {
-            base: NonNull::new(base_addr.cast()).unwrap().into(),
-            static_size,
-            accessible,
-            image: None,
-            dirty: false,
-            clear_on_drop: true,
-        }
-    }
-
-    #[cfg(feature = "pooling-allocator")]
-    pub(crate) fn dummy() -> MemoryImageSlot {
-        MemoryImageSlot {
-            // This pointer isn't ever actually used so its value doesn't
-            // matter but we need to satisfy `NonNull` requirement so create a
-            // `dangling` pointer as a sentinel that should cause problems if
-            // it's actually used.
-            base: NonNull::dangling().into(),
-            static_size: 0,
-            image: None,
-            accessible: 0,
-            dirty: false,
-            clear_on_drop: false,
-        }
-    }
-
-    /// Inform the MemoryImageSlot that it should *not* clear the underlying
-    /// address space when dropped. This should be used only when the
-    /// caller will clear or reuse the address space in some other
-    /// way.
-    pub(crate) fn no_clear_on_drop(&mut self) {
-        self.clear_on_drop = false;
-    }
-
-    pub(crate) fn set_heap_limit(&mut self, size_bytes: usize) -> Result<()> {
-        assert!(size_bytes <= self.static_size);
-
-        // If the heap limit already addresses accessible bytes then no syscalls
-        // are necessary since the data is already mapped into the process and
-        // waiting to go.
-        //
-        // This is used for "dynamic" memories where memory is not always
-        // decommitted during recycling (but it's still always reset).
-        if size_bytes <= self.accessible {
-            return Ok(());
-        }
-
-        // Otherwise use `mprotect` to make the new pages read/write.
-        self.set_protection(self.accessible..size_bytes, true)?;
-        self.accessible = size_bytes;
-
-        Ok(())
-    }
-
-    /// Prepares this slot for the instantiation of a new instance with the
-    /// provided linear memory image.
-    ///
-    /// The `initial_size_bytes` parameter indicates the required initial size
-    /// of the heap for the instance. The `maybe_image` is an optional initial
-    /// image for linear memory to contains. The `style` is the way compiled
-    /// code will be accessing this memory.
-    ///
-    /// The purpose of this method is to take a previously pristine slot
-    /// (`!self.dirty`) and transform its prior state into state necessary for
-    /// the given parameters. This could include, for example:
-    ///
-    /// * More memory may be made read/write if `initial_size_bytes` is larger
-    ///   than `self.accessible`.
-    /// * For `MemoryStyle::Static` linear memory may be made `PROT_NONE` if
-    ///   `self.accessible` is larger than `initial_size_bytes`.
-    /// * If no image was previously in place or if the wrong image was
-    ///   previously in place then `mmap` may be used to setup the initial
-    ///   image.
-    pub(crate) fn instantiate(
-        &mut self,
-        initial_size_bytes: usize,
-        maybe_image: Option<&Arc<MemoryImage>>,
-        plan: &MemoryPlan,
-    ) -> Result<()> {
-        assert!(!self.dirty);
-        assert!(initial_size_bytes <= self.static_size);
-
-        // First order of business is to blow away the previous linear memory
-        // image if it doesn't match the image specified here. If one is
-        // detected then it's reset with anonymous memory which means that all
-        // of memory up to `self.accessible` will now be read/write and zero.
-        //
-        // Note that this intentionally a "small mmap" which only covers the
-        // extent of the prior initialization image in order to preserve
-        // resident memory that might come before or after the image.
-        if self.image.as_ref() != maybe_image {
-            self.remove_image()?;
-        }
-
-        // The next order of business is to ensure that `self.accessible` is
-        // appropriate. First up is to grow the read/write portion of memory if
-        // it's not large enough to accommodate `initial_size_bytes`.
-        if self.accessible < initial_size_bytes {
-            self.set_protection(self.accessible..initial_size_bytes, true)?;
-            self.accessible = initial_size_bytes;
-        }
-
-        // If (1) the accessible region is not in its initial state, and (2) the
-        // memory relies on virtual memory at all (i.e. has offset guard pages
-        // and/or is static), then we need to reset memory protections. Put
-        // another way, the only time it is safe to not reset protections is
-        // when we are using dynamic memory without any guard pages.
-        if initial_size_bytes < self.accessible
-            && (plan.offset_guard_size > 0 || matches!(plan.style, MemoryStyle::Static { .. }))
-        {
-            self.set_protection(initial_size_bytes..self.accessible, false)?;
-            self.accessible = initial_size_bytes;
-        }
-
-        // Now that memory is sized appropriately the final operation is to
-        // place the new image into linear memory. Note that this operation is
-        // skipped if `self.image` matches `maybe_image`.
-        assert!(initial_size_bytes <= self.accessible);
-        if self.image.as_ref() != maybe_image {
-            if let Some(image) = maybe_image.as_ref() {
-                assert!(
-                    image.linear_memory_offset.checked_add(image.len).unwrap()
-                        <= initial_size_bytes
-                );
-                if image.len > 0 {
-                    unsafe {
-                        image.map_at(self.base.as_ptr())?;
-                    }
-                }
-            }
-            self.image = maybe_image.cloned();
-        }
-
-        // Flag ourselves as `dirty` which means that the next operation on this
-        // slot is required to be `clear_and_remain_ready`.
-        self.dirty = true;
-
-        Ok(())
-    }
-
-    pub(crate) fn remove_image(&mut self) -> Result<()> {
-        if let Some(image) = &self.image {
-            unsafe {
-                image.remap_as_zeros_at(self.base.as_ptr())?;
-            }
-            self.image = None;
-        }
-        Ok(())
-    }
-
-    /// Resets this linear memory slot back to a "pristine state".
-    ///
-    /// This will reset the memory back to its original contents on Linux or
-    /// reset the contents back to zero on other platforms. The `keep_resident`
-    /// argument is the maximum amount of memory to keep resident in this
-    /// process's memory on Linux. Up to that much memory will be `memset` to
-    /// zero where the rest of it will be reset or released with `madvise`.
-    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
-    pub(crate) fn clear_and_remain_ready(
-        &mut self,
-        keep_resident: usize,
-        decommit: impl FnMut(*mut u8, usize),
-    ) -> Result<()> {
-        assert!(self.dirty);
-
-        unsafe {
-            self.reset_all_memory_contents(keep_resident, decommit)?;
-        }
-
-        self.dirty = false;
-        Ok(())
-    }
-
-    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
-    unsafe fn reset_all_memory_contents(
-        &mut self,
-        keep_resident: usize,
-        decommit: impl FnMut(*mut u8, usize),
-    ) -> Result<()> {
-        match vm::decommit_behavior() {
-            DecommitBehavior::Zero => {
-                // If we're not on Linux then there's no generic platform way to
-                // reset memory back to its original state, so instead reset memory
-                // back to entirely zeros with an anonymous backing.
-                //
-                // Additionally the previous image, if any, is dropped here
-                // since it's no longer applicable to this mapping.
-                self.reset_with_anon_memory()
-            }
-            DecommitBehavior::RestoreOriginalMapping => {
-                self.reset_with_original_mapping(keep_resident, decommit);
-                Ok(())
-            }
-        }
-    }
-
-    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
-    unsafe fn reset_with_original_mapping(
-        &mut self,
-        keep_resident: usize,
-        mut decommit: impl FnMut(*mut u8, usize),
-    ) {
-        match &self.image {
-            Some(image) => {
-                assert!(self.accessible >= image.linear_memory_offset + image.len);
-                if image.linear_memory_offset < keep_resident {
-                    // If the image starts below the `keep_resident` then
-                    // memory looks something like this:
-                    //
-                    //               up to `keep_resident` bytes
-                    //                          |
-                    //          +--------------------------+  remaining_memset
-                    //          |                          | /
-                    //  <-------------->                <------->
-                    //
-                    //                              image_end
-                    // 0        linear_memory_offset   |             accessible
-                    // |                |              |                  |
-                    // +----------------+--------------+---------+--------+
-                    // |  dirty memory  |    image     |   dirty memory   |
-                    // +----------------+--------------+---------+--------+
-                    //
-                    //  <------+-------> <-----+----->  <---+---> <--+--->
-                    //         |               |            |        |
-                    //         |               |            |        |
-                    //   memset (1)            /            |   madvise (4)
-                    //                  mmadvise (2)       /
-                    //                                    /
-                    //                              memset (3)
-                    //
-                    //
-                    // In this situation there are two disjoint regions that are
-                    // `memset` manually to zero. Note that `memset (3)` may be
-                    // zero bytes large. Furthermore `madvise (4)` may also be
-                    // zero bytes large.
-
-                    let image_end = image.linear_memory_offset + image.len;
-                    let mem_after_image = self.accessible - image_end;
-                    let remaining_memset =
-                        (keep_resident - image.linear_memory_offset).min(mem_after_image);
-
-                    // This is memset (1)
-                    ptr::write_bytes(self.base.as_ptr(), 0u8, image.linear_memory_offset);
-
-                    // This is madvise (2)
-                    self.restore_original_mapping(
-                        image.linear_memory_offset,
-                        image.len,
-                        &mut decommit,
-                    );
-
-                    // This is memset (3)
-                    ptr::write_bytes(self.base.as_ptr().add(image_end), 0u8, remaining_memset);
-
-                    // This is madvise (4)
-                    self.restore_original_mapping(
-                        image_end + remaining_memset,
-                        mem_after_image - remaining_memset,
-                        &mut decommit,
-                    );
-                } else {
-                    // If the image starts after the `keep_resident` threshold
-                    // then we memset the start of linear memory and then use
-                    // madvise below for the rest of it, including the image.
-                    //
-                    // 0             keep_resident                   accessible
-                    // |                |                                 |
-                    // +----------------+---+----------+------------------+
-                    // |  dirty memory      |  image   |   dirty memory   |
-                    // +----------------+---+----------+------------------+
-                    //
-                    //  <------+-------> <-------------+----------------->
-                    //         |                       |
-                    //         |                       |
-                    //   memset (1)                 madvise (2)
-                    //
-                    // Here only a single memset is necessary since the image
-                    // started after the threshold which we're keeping resident.
-                    // Note that the memset may be zero bytes here.
-
-                    // This is memset (1)
-                    ptr::write_bytes(self.base.as_ptr(), 0u8, keep_resident);
-
-                    // This is madvise (2)
-                    self.restore_original_mapping(
-                        keep_resident,
-                        self.accessible - keep_resident,
-                        decommit,
-                    );
-                }
-            }
-
-            // If there's no memory image for this slot then memset the first
-            // bytes in the memory back to zero while using `madvise` to purge
-            // the rest.
-            None => {
-                let size_to_memset = keep_resident.min(self.accessible);
-                ptr::write_bytes(self.base.as_ptr(), 0u8, size_to_memset);
-                self.restore_original_mapping(
-                    size_to_memset,
-                    self.accessible - size_to_memset,
-                    decommit,
-                );
-            }
-        }
-    }
-
-    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
-    unsafe fn restore_original_mapping(
-        &self,
-        base: usize,
-        len: usize,
-        mut decommit: impl FnMut(*mut u8, usize),
-    ) {
-        assert!(base + len <= self.accessible);
-        if len == 0 {
-            return;
-        }
-
-        assert_eq!(
-            vm::decommit_behavior(),
-            DecommitBehavior::RestoreOriginalMapping
-        );
-        decommit(self.base.as_ptr().add(base), len);
-    }
-
-    fn set_protection(&self, range: Range<usize>, readwrite: bool) -> Result<()> {
-        assert!(range.start <= range.end);
-        assert!(range.end <= self.static_size);
-        if range.len() == 0 {
-            return Ok(());
-        }
-
-        unsafe {
-            let start = self.base.as_ptr().add(range.start);
-            if readwrite {
-                vm::expose_existing_mapping(start, range.len()).err2anyhow()?;
-            } else {
-                vm::hide_existing_mapping(start, range.len()).err2anyhow()?;
-            }
-        }
-
-        Ok(())
-    }
-
-    pub(crate) fn has_image(&self) -> bool {
-        self.image.is_some()
-    }
-
-    #[allow(dead_code)] // ignore warnings as this is only used in some cfgs
-    pub(crate) fn is_dirty(&self) -> bool {
-        self.dirty
-    }
-
-    /// Map anonymous zeroed memory across the whole slot,
-    /// inaccessible. Used both during instantiate and during drop.
-    fn reset_with_anon_memory(&mut self) -> Result<()> {
-        if self.static_size == 0 {
-            assert!(self.image.is_none());
-            assert_eq!(self.accessible, 0);
-            return Ok(());
-        }
-
-        unsafe {
-            vm::erase_existing_mapping(self.base.as_ptr(), self.static_size).err2anyhow()?;
-        }
-
-        self.image = None;
-        self.accessible = 0;
-
-        Ok(())
-    }
-}
-
-impl Drop for MemoryImageSlot {
-    fn drop(&mut self) {
-        // The MemoryImageSlot may be dropped if there is an error during
-        // instantiation: for example, if a memory-growth limiter
-        // disallows a guest from having a memory of a certain size,
-        // after we've already initialized the MemoryImageSlot.
-        //
-        // We need to return this region of the large pool mmap to a
-        // safe state (with no module-specific mappings). The
-        // MemoryImageSlot will not be returned to the MemoryPool, so a new
-        // MemoryImageSlot will be created and overwrite the mappings anyway
-        // on the slot's next use; but for safety and to avoid
-        // resource leaks it's better not to have stale mappings to a
-        // possibly-otherwise-dead module's image.
-        //
-        // To "wipe the slate clean", let's do a mmap of anonymous
-        // memory over the whole region, with PROT_NONE. Note that we
-        // *can't* simply munmap, because that leaves a hole in the
-        // middle of the pooling allocator's big memory area that some
-        // other random mmap may swoop in and take, to be trampled
-        // over by the next MemoryImageSlot later.
-        //
-        // Since we're in drop(), we can't sanely return an error if
-        // this mmap fails. Instead though the result is unwrapped here to
-        // trigger a panic if something goes wrong. Otherwise if this
-        // reset-the-mapping fails then on reuse it might be possible, depending
-        // on precisely where errors happened, that stale memory could get
-        // leaked through.
-        //
-        // The exception to all of this is if the `clear_on_drop` flag
-        // (which is set by default) is false. If so, the owner of
-        // this MemoryImageSlot has indicated that it will clean up in some
-        // other way.
-        if self.clear_on_drop {
-            self.reset_with_anon_memory().unwrap();
-        }
-    }
-}
-
-#[cfg(all(test, target_os = "linux", not(miri)))]
-mod test {
-    use super::{MemoryImage, MemoryImageSlot, MemoryImageSource, MemoryPlan, MemoryStyle};
-    use crate::runtime::vm::mmap::Mmap;
-    use crate::runtime::vm::page_size;
-    use crate::runtime::vm::sys::vm::decommit_pages;
-    use anyhow::Result;
-    use std::sync::Arc;
-    use wasmtime_environ::Memory;
-
-    fn create_memfd_with_data(offset: usize, data: &[u8]) -> Result<MemoryImage> {
-        // Offset must be page-aligned.
-        let page_size = page_size();
-        assert_eq!(offset & (page_size - 1), 0);
-
-        // The image length is rounded up to the nearest page size
-        let image_len = (data.len() + page_size - 1) & !(page_size - 1);
-
-        Ok(MemoryImage {
-            source: MemoryImageSource::from_data(data)?.unwrap(),
-            len: image_len,
-            source_offset: 0,
-            linear_memory_offset: offset,
-        })
-    }
-
-    fn dummy_memory_plan(style: MemoryStyle) -> MemoryPlan {
-        MemoryPlan {
-            style,
-            memory: Memory {
-                minimum: 0,
-                maximum: None,
-                shared: false,
-                memory64: false,
-            },
-            pre_guard_size: 0,
-            offset_guard_size: 0,
-        }
-    }
-
-    #[test]
-    fn instantiate_no_image() {
-        let plan = dummy_memory_plan(MemoryStyle::Static {
-            byte_reservation: 4 << 30,
-        });
-        // 4 MiB mmap'd area, not accessible
-        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
-        // Create a MemoryImageSlot on top of it
-        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
-        memfd.no_clear_on_drop();
-        assert!(!memfd.is_dirty());
-        // instantiate with 64 KiB initial size
-        memfd.instantiate(64 << 10, None, &plan).unwrap();
-        assert!(memfd.is_dirty());
-        // We should be able to access this 64 KiB (try both ends) and
-        // it should consist of zeroes.
-        let slice = unsafe { mmap.slice_mut(0..65536) };
-        assert_eq!(0, slice[0]);
-        assert_eq!(0, slice[65535]);
-        slice[1024] = 42;
-        assert_eq!(42, slice[1024]);
-        // grow the heap
-        memfd.set_heap_limit(128 << 10).unwrap();
-        let slice = unsafe { mmap.slice(0..1 << 20) };
-        assert_eq!(42, slice[1024]);
-        assert_eq!(0, slice[131071]);
-        // instantiate again; we should see zeroes, even as the
-        // reuse-anon-mmap-opt kicks in
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-        assert!(!memfd.is_dirty());
-        memfd.instantiate(64 << 10, None, &plan).unwrap();
-        let slice = unsafe { mmap.slice(0..65536) };
-        assert_eq!(0, slice[1024]);
-    }
-
-    #[test]
-    fn instantiate_image() {
-        let page_size = page_size();
-        let plan = dummy_memory_plan(MemoryStyle::Static {
-            byte_reservation: 4 << 30,
-        });
-        // 4 MiB mmap'd area, not accessible
-        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
-        // Create a MemoryImageSlot on top of it
-        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
-        memfd.no_clear_on_drop();
-        // Create an image with some data.
-        let image = Arc::new(create_memfd_with_data(page_size, &[1, 2, 3, 4]).unwrap());
-        // Instantiate with this image
-        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
-        assert!(memfd.has_image());
-        let slice = unsafe { mmap.slice_mut(0..65536) };
-        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
-        slice[page_size] = 5;
-        // Clear and re-instantiate same image
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
-        let slice = unsafe { mmap.slice_mut(0..65536) };
-        // Should not see mutation from above
-        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
-        // Clear and re-instantiate no image
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-        memfd.instantiate(64 << 10, None, &plan).unwrap();
-        assert!(!memfd.has_image());
-        let slice = unsafe { mmap.slice_mut(0..65536) };
-        assert_eq!(&[0, 0, 0, 0], &slice[page_size..][..4]);
-        // Clear and re-instantiate image again
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
-        let slice = unsafe { mmap.slice_mut(0..65536) };
-        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
-        // Create another image with different data.
-        let image2 = Arc::new(create_memfd_with_data(page_size, &[10, 11, 12, 13]).unwrap());
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-        memfd.instantiate(128 << 10, Some(&image2), &plan).unwrap();
-        let slice = unsafe { mmap.slice_mut(0..65536) };
-        assert_eq!(&[10, 11, 12, 13], &slice[page_size..][..4]);
-        // Instantiate the original image again; we should notice it's
-        // a different image and not reuse the mappings.
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-        memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
-        let slice = unsafe { mmap.slice_mut(0..65536) };
-        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
-    }
-
-    #[test]
-    #[cfg(target_os = "linux")]
-    fn memset_instead_of_madvise() {
-        let page_size = page_size();
-        let plan = dummy_memory_plan(MemoryStyle::Static {
-            byte_reservation: 100 << 16,
-        });
-        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
-        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
-        memfd.no_clear_on_drop();
-
-        // Test basics with the image
-        for image_off in [0, page_size, page_size * 2] {
-            let image = Arc::new(create_memfd_with_data(image_off, &[1, 2, 3, 4]).unwrap());
-            for amt_to_memset in [0, page_size, page_size * 10, 1 << 20, 10 << 20] {
-                memfd.instantiate(64 << 10, Some(&image), &plan).unwrap();
-                assert!(memfd.has_image());
-                let slice = unsafe { mmap.slice_mut(0..64 << 10) };
-                if image_off > 0 {
-                    assert_eq!(slice[image_off - 1], 0);
-                }
-                assert_eq!(slice[image_off + 5], 0);
-                assert_eq!(&[1, 2, 3, 4], &slice[image_off..][..4]);
-                slice[image_off] = 5;
-                assert_eq!(&[5, 2, 3, 4], &slice[image_off..][..4]);
-                memfd
-                    .clear_and_remain_ready(amt_to_memset, |ptr, len| unsafe {
-                        decommit_pages(ptr, len).unwrap()
-                    })
-                    .unwrap();
-            }
-        }
-
-        // Test without an image
-        for amt_to_memset in [0, page_size, page_size * 10, 1 << 20, 10 << 20] {
-            memfd.instantiate(64 << 10, None, &plan).unwrap();
-            let mem = unsafe { mmap.slice_mut(0..64 << 10) };
-            for chunk in mem.chunks_mut(1024) {
-                assert_eq!(chunk[0], 0);
-                chunk[0] = 5;
-            }
-            memfd
-                .clear_and_remain_ready(amt_to_memset, |ptr, len| unsafe {
-                    decommit_pages(ptr, len).unwrap()
-                })
-                .unwrap();
-        }
-    }
-
-    #[test]
-    #[cfg(target_os = "linux")]
-    fn dynamic() {
-        let page_size = page_size();
-        let plan = dummy_memory_plan(MemoryStyle::Dynamic { reserve: 200 });
-
-        let mut mmap = Mmap::accessible_reserved(0, 4 << 20).unwrap();
-        let mut memfd = MemoryImageSlot::create(mmap.as_mut_ptr() as *mut _, 0, 4 << 20);
-        memfd.no_clear_on_drop();
-        let image = Arc::new(create_memfd_with_data(page_size, &[1, 2, 3, 4]).unwrap());
-        let initial = 64 << 10;
-
-        // Instantiate the image and test that memory remains accessible after
-        // it's cleared.
-        memfd.instantiate(initial, Some(&image), &plan).unwrap();
-        assert!(memfd.has_image());
-        let slice = unsafe { mmap.slice_mut(0..(64 << 10) + page_size) };
-        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
-        slice[page_size] = 5;
-        assert_eq!(&[5, 2, 3, 4], &slice[page_size..][..4]);
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
-
-        // Re-instantiate make sure it preserves memory. Grow a bit and set data
-        // beyond the initial size.
-        memfd.instantiate(initial, Some(&image), &plan).unwrap();
-        assert_eq!(&[1, 2, 3, 4], &slice[page_size..][..4]);
-        memfd.set_heap_limit(initial * 2).unwrap();
-        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
-        slice[initial] = 100;
-        assert_eq!(&[100, 0], &slice[initial..initial + 2]);
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-
-        // Test that memory is still accessible, but it's been reset
-        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
-
-        // Instantiate again, and again memory beyond the initial size should
-        // still be accessible. Grow into it again and make sure it works.
-        memfd.instantiate(initial, Some(&image), &plan).unwrap();
-        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
-        memfd.set_heap_limit(initial * 2).unwrap();
-        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
-        slice[initial] = 100;
-        assert_eq!(&[100, 0], &slice[initial..initial + 2]);
-        memfd
-            .clear_and_remain_ready(0, |ptr, len| unsafe { decommit_pages(ptr, len).unwrap() })
-            .unwrap();
-
-        // Reset the image to none and double-check everything is back to zero
-        memfd.instantiate(64 << 10, None, &plan).unwrap();
-        assert!(!memfd.has_image());
-        assert_eq!(&[0, 0, 0, 0], &slice[page_size..][..4]);
-        assert_eq!(&[0, 0], &slice[initial..initial + 2]);
-    }
-}