wasmtime 22.0.0 → 23.0.2

data/ext/cargo-vendor/cranelift-codegen-0.109.0/src/machinst/lower.rs

@@ -1,1432 +0,0 @@
-//! This module implements lowering (instruction selection) from Cranelift IR
-//! to machine instructions with virtual registers. This is *almost* the final
-//! machine code, except for register allocation.
-
-// TODO: separate the IR-query core of `Lower` from the lowering logic built on
-// top of it, e.g. the side-effect/coloring analysis and the scan support.
-
-use crate::entity::SecondaryMap;
-use crate::inst_predicates::{has_lowering_side_effect, is_constant_64bit};
-use crate::ir::pcc::{Fact, FactContext, PccError, PccResult};
-use crate::ir::{
-    ArgumentPurpose, Block, Constant, ConstantData, DataFlowGraph, ExternalName, Function,
-    GlobalValue, GlobalValueData, Immediate, Inst, InstructionData, MemFlags, RelSourceLoc, Type,
-    Value, ValueDef, ValueLabelAssignments, ValueLabelStart,
-};
-use crate::machinst::{
-    writable_value_regs, BlockIndex, BlockLoweringOrder, Callee, InsnIndex, LoweredBlock,
-    MachLabel, Reg, SigSet, VCode, VCodeBuilder, VCodeConstant, VCodeConstantData, VCodeConstants,
-    VCodeInst, ValueRegs, Writable,
-};
-use crate::settings::Flags;
-use crate::{trace, CodegenResult};
-use alloc::vec::Vec;
-use cranelift_control::ControlPlane;
-use rustc_hash::{FxHashMap, FxHashSet};
-use smallvec::{smallvec, SmallVec};
-use std::fmt::Debug;
-
-use super::{VCodeBuildDirection, VRegAllocator};
-
-/// A vector of ValueRegs, used to represent the outputs of an instruction.
-pub type InstOutput = SmallVec<[ValueRegs<Reg>; 2]>;
-
-/// An "instruction color" partitions CLIF instructions by side-effecting ops.
-/// All instructions with the same "color" are guaranteed not to be separated by
-/// any side-effecting op (for this purpose, loads are also considered
-/// side-effecting, to avoid subtle questions w.r.t. the memory model), and
-/// furthermore, it is guaranteed that for any two instructions A and B such
-/// that color(A) == color(B), either A dominates B and B postdominates A, or
-/// vice-versa. (For now, in practice, only ops in the same basic block can ever
-/// have the same color, trivially providing the second condition.) Intuitively,
-/// this means that the ops of the same color must always execute "together", as
-/// part of one atomic contiguous section of the dynamic execution trace, and
-/// they can be freely permuted (modulo true dataflow dependencies) without
-/// affecting program behavior.
-#[derive(Clone, Copy, Debug, PartialEq, Eq, Hash)]
-struct InstColor(u32);
-impl InstColor {
-    fn new(n: u32) -> InstColor {
-        InstColor(n)
-    }
-
-    /// Get an arbitrary index representing this color. The index is unique
-    /// *within a single function compilation*, but indices may be reused across
-    /// functions.
-    pub fn get(self) -> u32 {
-        self.0
-    }
-}
-
-/// A representation of all of the ways in which a value is available, aside
-/// from as a direct register.
-///
-/// - An instruction, if it would be allowed to occur at the current location
-///   instead (see [Lower::get_input_as_source_or_const()] for more details).
-///
-/// - A constant, if the value is known to be a constant.
-#[derive(Clone, Copy, Debug)]
-pub struct NonRegInput {
-    /// An instruction produces this value (as the given output), and its
-    /// computation (and side-effect if applicable) could occur at the
-    /// current instruction's location instead.
-    ///
-    /// If this instruction's operation is merged into the current instruction,
-    /// the backend must call [Lower::sink_inst()].
-    ///
-    /// This enum indicates whether this use of the source instruction
-    /// is unique or not.
-    pub inst: InputSourceInst,
-    /// The value is a known constant.
-    pub constant: Option<u64>,
-}
-
-/// When examining an input to an instruction, this enum provides one
-/// of several options: there is or isn't a single instruction (that
-/// we can see and merge with) that produces that input's value, and
-/// we are or aren't the single user of that instruction.
-#[derive(Clone, Copy, Debug)]
-pub enum InputSourceInst {
-    /// The input in question is the single, unique use of the given
-    /// instruction and output index, and it can be sunk to the
-    /// location of this input.
-    UniqueUse(Inst, usize),
-    /// The input in question is one of multiple uses of the given
-    /// instruction. It can still be sunk to the location of this
-    /// input.
-    Use(Inst, usize),
-    /// We cannot determine which instruction produced the input, or
-    /// it is one of several instructions (e.g., due to a control-flow
-    /// merge and blockparam), or the source instruction cannot be
-    /// allowed to sink to the current location due to side-effects.
-    None,
-}
-
-impl InputSourceInst {
-    /// Get the instruction and output index for this source, whether
-    /// we are its single or one of many users.
-    pub fn as_inst(&self) -> Option<(Inst, usize)> {
-        match self {
-            &InputSourceInst::UniqueUse(inst, output_idx)
-            | &InputSourceInst::Use(inst, output_idx) => Some((inst, output_idx)),
-            &InputSourceInst::None => None,
-        }
-    }
-}
-
-/// A machine backend.
-pub trait LowerBackend {
-    /// The machine instruction type.
-    type MInst: VCodeInst;
-
-    /// Lower a single instruction.
-    ///
-    /// For a branch, this function should not generate the actual branch
-    /// instruction. However, it must force any values it needs for the branch
-    /// edge (block-param actuals) into registers, because the actual branch
-    /// generation (`lower_branch()`) happens *after* any possible merged
-    /// out-edge.
-    ///
-    /// Returns `None` if no lowering for the instruction was found.
-    fn lower(&self, ctx: &mut Lower<Self::MInst>, inst: Inst) -> Option<InstOutput>;
-
-    /// Lower a block-terminating group of branches (which together can be seen
-    /// as one N-way branch), given a vcode MachLabel for each target.
-    ///
-    /// Returns `None` if no lowering for the branch was found.
-    fn lower_branch(
-        &self,
-        ctx: &mut Lower<Self::MInst>,
-        inst: Inst,
-        targets: &[MachLabel],
-    ) -> Option<()>;
-
-    /// A bit of a hack: give a fixed register that always holds the result of a
-    /// `get_pinned_reg` instruction, if known.  This allows elision of moves
-    /// into the associated vreg, instead using the real reg directly.
-    fn maybe_pinned_reg(&self) -> Option<Reg> {
-        None
-    }
-
-    /// The type of state carried between `check_fact` invocations.
-    type FactFlowState: Default + Clone + Debug;
-
-    /// Check any facts about an instruction, given VCode with facts
-    /// on VRegs. Takes mutable `VCode` so that it can propagate some
-    /// kinds of facts automatically.
-    fn check_fact(
-        &self,
-        _ctx: &FactContext<'_>,
-        _vcode: &mut VCode<Self::MInst>,
-        _inst: InsnIndex,
-        _state: &mut Self::FactFlowState,
-    ) -> PccResult<()> {
-        Err(PccError::UnimplementedBackend)
-    }
-}
-
-/// Machine-independent lowering driver / machine-instruction container. Maintains a correspondence
-/// from original Inst to MachInsts.
-pub struct Lower<'func, I: VCodeInst> {
-    /// The function to lower.
-    f: &'func Function,
-
-    /// Lowered machine instructions.
-    vcode: VCodeBuilder<I>,
-
-    /// VReg allocation context, given to the vcode field at build time to finalize the vcode.
-    vregs: VRegAllocator<I>,
-
-    /// Mapping from `Value` (SSA value in IR) to virtual register.
-    value_regs: SecondaryMap<Value, ValueRegs<Reg>>,
-
-    /// sret registers, if needed.
-    sret_reg: Option<ValueRegs<Reg>>,
-
-    /// Instruction colors at block exits. From this map, we can recover all
-    /// instruction colors by scanning backward from the block end and
-    /// decrementing on any color-changing (side-effecting) instruction.
-    block_end_colors: SecondaryMap<Block, InstColor>,
-
-    /// Instruction colors at side-effecting ops. This is the *entry* color,
-    /// i.e., the version of global state that exists before an instruction
-    /// executes.  For each side-effecting instruction, the *exit* color is its
-    /// entry color plus one.
-    side_effect_inst_entry_colors: FxHashMap<Inst, InstColor>,
-
-    /// Current color as we scan during lowering. While we are lowering an
-    /// instruction, this is equal to the color *at entry to* the instruction.
-    cur_scan_entry_color: Option<InstColor>,
-
-    /// Current instruction as we scan during lowering.
-    cur_inst: Option<Inst>,
-
-    /// Instruction constant values, if known.
-    inst_constants: FxHashMap<Inst, u64>,
-
-    /// Use-counts per SSA value, as counted in the input IR. These
-    /// are "coarsened", in the abstract-interpretation sense: we only
-    /// care about "0, 1, many" states, as this is all we need and
-    /// this lets us do an efficient fixpoint analysis.
-    ///
-    /// See doc comment on `ValueUseState` for more details.
-    value_ir_uses: SecondaryMap<Value, ValueUseState>,
-
-    /// Actual uses of each SSA value so far, incremented while lowering.
-    value_lowered_uses: SecondaryMap<Value, u32>,
-
-    /// Effectful instructions that have been sunk; they are not codegen'd at
-    /// their original locations.
-    inst_sunk: FxHashSet<Inst>,
-
-    /// Instructions collected for the CLIF inst in progress, in forward order.
-    ir_insts: Vec<I>,
-
-    /// The register to use for GetPinnedReg, if any, on this architecture.
-    pinned_reg: Option<Reg>,
-
-    /// Compilation flags.
-    flags: Flags,
-}
-
-/// How is a value used in the IR?
-///
-/// This can be seen as a coarsening of an integer count. We only need
-/// distinct states for zero, one, or many.
-///
-/// This analysis deserves further explanation. The basic idea is that
-/// we want to allow instruction lowering to know whether a value that
-/// an instruction references is *only* referenced by that one use, or
-/// by others as well. This is necessary to know when we might want to
-/// move a side-effect: we cannot, for example, duplicate a load, so
-/// we cannot let instruction lowering match a load as part of a
-/// subpattern and potentially incorporate it.
-///
-/// Note that a lot of subtlety comes into play once we have
-/// *indirect* uses. The classical example of this in our development
-/// history was the x86 compare instruction, which is incorporated
-/// into flags users (e.g. `selectif`, `trueif`, branches) and can
-/// subsequently incorporate loads, or at least we would like it
-/// to. However, danger awaits: the compare might be the only user of
-/// a load, so we might think we can just move the load (and nothing
-/// is duplicated -- success!), except that the compare itself is
-/// codegen'd in multiple places, where it is incorporated as a
-/// subpattern itself.
-///
-/// So we really want a notion of "unique all the way along the
-/// matching path". Rust's `&T` and `&mut T` offer a partial analogy
-/// to the semantics that we want here: we want to know when we've
-/// matched a unique use of an instruction, and that instruction's
-/// unique use of another instruction, etc, just as `&mut T` can only
-/// be obtained by going through a chain of `&mut T`. If one has a
-/// `&T` to a struct containing `&mut T` (one of several uses of an
-/// instruction that itself has a unique use of an instruction), one
-/// can only get a `&T` (one can only get a "I am one of several users
-/// of this instruction" result).
-///
-/// We could track these paths, either dynamically as one "looks up the operand
-/// tree" or precomputed. But the former requires state and means that the
-/// `Lower` API carries that state implicitly, which we'd like to avoid if we
-/// can. And the latter implies O(n^2) storage: it is an all-pairs property (is
-/// inst `i` unique from the point of view of `j`).
-///
-/// To make matters even a little more complex still, a value that is
-/// not uniquely used when initially viewing the IR can *become*
-/// uniquely used, at least as a root allowing further unique uses of
-/// e.g. loads to merge, if no other instruction actually merges
-/// it. To be more concrete, if we have `v1 := load; v2 := op v1; v3
-/// := op v2; v4 := op v2` then `v2` is non-uniquely used, so from the
-/// point of view of lowering `v4` or `v3`, we cannot merge the load
-/// at `v1`. But if we decide just to use the assigned register for
-/// `v2` at both `v3` and `v4`, then we only actually codegen `v2`
-/// once, so it *is* a unique root at that point and we *can* merge
-/// the load.
-///
-/// Note also that the color scheme is not sufficient to give us this
-/// information, for various reasons: reasoning about side-effects
-/// does not tell us about potential duplication of uses through pure
-/// ops.
-///
-/// To keep things simple and avoid error-prone lowering APIs that
-/// would extract more information about whether instruction merging
-/// happens or not (we don't have that info now, and it would be
-/// difficult to refactor to get it and make that refactor 100%
-/// correct), we give up on the above "can become unique if not
-/// actually merged" point. Instead, we compute a
-/// transitive-uniqueness. That is what this enum represents.
-///
-/// To define it plainly: a value is `Unused` if no references exist
-/// to it; `Once` if only one other op refers to it, *and* that other
-/// op is `Unused` or `Once`; and `Multiple` otherwise. In other
-/// words, `Multiple` is contagious: even if an op's result value is
-/// directly used only once in the CLIF, that value is `Multiple` if
-/// the op that uses it is itself used multiple times (hence could be
-/// codegen'd multiple times). In brief, this analysis tells us
-/// whether, if every op merged all of its operand tree, a given op
-/// could be codegen'd in more than one place.
-///
-/// To compute this, we first consider direct uses. At this point
-/// `Unused` answers are correct, `Multiple` answers are correct, but
-/// some `Once`s may change to `Multiple`s. Then we propagate
-/// `Multiple` transitively using a workqueue/fixpoint algorithm.
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-enum ValueUseState {
-    /// Not used at all.
-    Unused,
-    /// Used exactly once.
-    Once,
-    /// Used multiple times.
-    Multiple,
-}
-
-impl ValueUseState {
-    /// Add one use.
-    fn inc(&mut self) {
-        let new = match self {
-            Self::Unused => Self::Once,
-            Self::Once | Self::Multiple => Self::Multiple,
-        };
-        *self = new;
-    }
-}
-
-/// Notion of "relocation distance". This gives an estimate of how far away a symbol will be from a
-/// reference.
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum RelocDistance {
-    /// Target of relocation is "nearby". The threshold for this is fuzzy but should be interpreted
-    /// as approximately "within the compiled output of one module"; e.g., within AArch64's +/-
-    /// 128MB offset. If unsure, use `Far` instead.
-    Near,
-    /// Target of relocation could be anywhere in the address space.
-    Far,
-}
-
-impl<'func, I: VCodeInst> Lower<'func, I> {
-    /// Prepare a new lowering context for the given IR function.
-    pub fn new(
-        f: &'func Function,
-        abi: Callee<I::ABIMachineSpec>,
-        emit_info: I::Info,
-        block_order: BlockLoweringOrder,
-        sigs: SigSet,
-        flags: Flags,
-    ) -> CodegenResult<Self> {
-        let constants = VCodeConstants::with_capacity(f.dfg.constants.len());
-        let vcode = VCodeBuilder::new(
-            sigs,
-            abi,
-            emit_info,
-            block_order,
-            constants,
-            VCodeBuildDirection::Backward,
-        );
-
-        // We usually need two VRegs per instruction result, plus extras for
-        // various temporaries, but two per Value is a good starting point.
-        let mut vregs = VRegAllocator::with_capacity(f.dfg.num_values() * 2);
-
-        let mut value_regs = SecondaryMap::with_default(ValueRegs::invalid());
-
-        // Assign a vreg to each block param and each inst result.
-        for bb in f.layout.blocks() {
-            for &param in f.dfg.block_params(bb) {
-                let ty = f.dfg.value_type(param);
-                if value_regs[param].is_invalid() {
-                    let regs = vregs.alloc_with_maybe_fact(ty, f.dfg.facts[param].clone())?;
-                    value_regs[param] = regs;
-                    trace!("bb {} param {}: regs {:?}", bb, param, regs);
-                }
-            }
-            for inst in f.layout.block_insts(bb) {
-                for &result in f.dfg.inst_results(inst) {
-                    let ty = f.dfg.value_type(result);
-                    if value_regs[result].is_invalid() && !ty.is_invalid() {
-                        let regs = vregs.alloc_with_maybe_fact(ty, f.dfg.facts[result].clone())?;
-                        value_regs[result] = regs;
-                        trace!(
-                            "bb {} inst {} ({:?}): result {} regs {:?}",
-                            bb,
-                            inst,
-                            f.dfg.insts[inst],
-                            result,
-                            regs,
-                        );
-                    }
-                }
-            }
-        }
-
-        // Find the sret register, if it's used.
-        let mut sret_param = None;
-        for ret in vcode.abi().signature().returns.iter() {
-            if ret.purpose == ArgumentPurpose::StructReturn {
-                let entry_bb = f.stencil.layout.entry_block().unwrap();
-                for (&param, sig_param) in f
-                    .dfg
-                    .block_params(entry_bb)
-                    .iter()
-                    .zip(vcode.abi().signature().params.iter())
-                {
-                    if sig_param.purpose == ArgumentPurpose::StructReturn {
-                        assert!(sret_param.is_none());
-                        sret_param = Some(param);
-                    }
-                }
-
-                assert!(sret_param.is_some());
-            }
-        }
-
-        let sret_reg = sret_param.map(|param| {
-            let regs = value_regs[param];
-            assert!(regs.len() == 1);
-            regs
-        });
-
-        // Compute instruction colors, find constant instructions, and find instructions with
-        // side-effects, in one combined pass.
-        let mut cur_color = 0;
-        let mut block_end_colors = SecondaryMap::with_default(InstColor::new(0));
-        let mut side_effect_inst_entry_colors = FxHashMap::default();
-        let mut inst_constants = FxHashMap::default();
-        for bb in f.layout.blocks() {
-            cur_color += 1;
-            for inst in f.layout.block_insts(bb) {
-                let side_effect = has_lowering_side_effect(f, inst);
-
-                trace!("bb {} inst {} has color {}", bb, inst, cur_color);
-                if side_effect {
-                    side_effect_inst_entry_colors.insert(inst, InstColor::new(cur_color));
-                    trace!(" -> side-effecting; incrementing color for next inst");
-                    cur_color += 1;
-                }
-
-                // Determine if this is a constant; if so, add to the table.
-                if let Some(c) = is_constant_64bit(f, inst) {
-                    trace!(" -> constant: {}", c);
-                    inst_constants.insert(inst, c);
-                }
-            }
-
-            block_end_colors[bb] = InstColor::new(cur_color);
-        }
-
-        let value_ir_uses = Self::compute_use_states(f, sret_param);
-
-        Ok(Lower {
-            f,
-            vcode,
-            vregs,
-            value_regs,
-            sret_reg,
-            block_end_colors,
-            side_effect_inst_entry_colors,
-            inst_constants,
-            value_ir_uses,
-            value_lowered_uses: SecondaryMap::default(),
-            inst_sunk: FxHashSet::default(),
-            cur_scan_entry_color: None,
-            cur_inst: None,
-            ir_insts: vec![],
-            pinned_reg: None,
-            flags,
-        })
-    }
-
-    pub fn sigs(&self) -> &SigSet {
-        self.vcode.sigs()
-    }
-
-    pub fn sigs_mut(&mut self) -> &mut SigSet {
-        self.vcode.sigs_mut()
-    }
-
-    /// Pre-analysis: compute `value_ir_uses`. See comment on
-    /// `ValueUseState` for a description of what this analysis
-    /// computes.
-    fn compute_use_states<'a>(
-        f: &'a Function,
-        sret_param: Option<Value>,
-    ) -> SecondaryMap<Value, ValueUseState> {
-        // We perform the analysis without recursion, so we don't
-        // overflow the stack on long chains of ops in the input.
-        //
-        // This is sort of a hybrid of a "shallow use-count" pass and
-        // a DFS. We iterate over all instructions and mark their args
-        // as used. However when we increment a use-count to
-        // "Multiple" we push its args onto the stack and do a DFS,
-        // immediately marking the whole dependency tree as
-        // Multiple. Doing both (shallow use-counting over all insts,
-        // and deep Multiple propagation) lets us trim both
-        // traversals, stopping recursion when a node is already at
-        // the appropriate state.
-        //
-        // In particular, note that the *coarsening* into {Unused,
-        // Once, Multiple} is part of what makes this pass more
-        // efficient than a full indirect-use-counting pass.
-
-        let mut value_ir_uses = SecondaryMap::with_default(ValueUseState::Unused);
-
-        if let Some(sret_param) = sret_param {
-            // There's an implicit use of the struct-return parameter in each
-            // copy of the function epilogue, which we count here.
-            value_ir_uses[sret_param] = ValueUseState::Multiple;
-        }
-
-        // Stack of iterators over Values as we do DFS to mark
-        // Multiple-state subtrees. The iterator type is whatever is
-        // returned by `uses` below.
-        let mut stack: SmallVec<[_; 16]> = smallvec![];
-
-        // Find the args for the inst corresponding to the given value.
-        let uses = |value| {
-            trace!(" -> pushing args for {} onto stack", value);
-            if let ValueDef::Result(src_inst, _) = f.dfg.value_def(value) {
-                Some(f.dfg.inst_values(src_inst))
-            } else {
-                None
-            }
-        };
-
-        // Do a DFS through `value_ir_uses` to mark a subtree as
-        // Multiple.
-        for inst in f
-            .layout
-            .blocks()
-            .flat_map(|block| f.layout.block_insts(block))
-        {
-            // If this inst produces multiple values, we must mark all
-            // of its args as Multiple, because otherwise two uses
-            // could come in as Once on our two different results.
-            let force_multiple = f.dfg.inst_results(inst).len() > 1;
-
-            // Iterate over all values used by all instructions, noting an
-            // additional use on each operand.
-            for arg in f.dfg.inst_values(inst) {
-                debug_assert!(f.dfg.value_is_real(arg));
-                let old = value_ir_uses[arg];
-                if force_multiple {
-                    trace!(
-                        "forcing arg {} to Multiple because of multiple results of user inst",
-                        arg
-                    );
-                    value_ir_uses[arg] = ValueUseState::Multiple;
-                } else {
-                    value_ir_uses[arg].inc();
-                }
-                let new = value_ir_uses[arg];
-                trace!("arg {} used, old state {:?}, new {:?}", arg, old, new);
-
-                // On transition to Multiple, do DFS.
-                if old == ValueUseState::Multiple || new != ValueUseState::Multiple {
-                    continue;
-                }
-                if let Some(iter) = uses(arg) {
-                    stack.push(iter);
-                }
-                while let Some(iter) = stack.last_mut() {
-                    if let Some(value) = iter.next() {
-                        debug_assert!(f.dfg.value_is_real(value));
-                        trace!(" -> DFS reaches {}", value);
-                        if value_ir_uses[value] == ValueUseState::Multiple {
-                            // Truncate DFS here: no need to go further,
-                            // as whole subtree must already be Multiple.
-                            // With debug asserts, check one level of
-                            // that invariant at least.
-                            debug_assert!(uses(value).into_iter().flatten().all(|arg| {
-                                debug_assert!(f.dfg.value_is_real(arg));
-                                value_ir_uses[arg] == ValueUseState::Multiple
-                            }));
-                            continue;
-                        }
-                        value_ir_uses[value] = ValueUseState::Multiple;
-                        trace!(" -> became Multiple");
-                        if let Some(iter) = uses(value) {
-                            stack.push(iter);
-                        }
-                    } else {
-                        // Empty iterator, discard.
-                        stack.pop();
-                    }
-                }
-            }
-        }
-
-        value_ir_uses
-    }
-
-    fn gen_arg_setup(&mut self) {
-        if let Some(entry_bb) = self.f.layout.entry_block() {
-            trace!(
-                "gen_arg_setup: entry BB {} args are:\n{:?}",
-                entry_bb,
-                self.f.dfg.block_params(entry_bb)
-            );
-
-            for (i, param) in self.f.dfg.block_params(entry_bb).iter().enumerate() {
-                if self.value_ir_uses[*param] == ValueUseState::Unused {
-                    continue;
-                }
-                let regs = writable_value_regs(self.value_regs[*param]);
-                for insn in self
-                    .vcode
-                    .vcode
-                    .abi
-                    .gen_copy_arg_to_regs(&self.vcode.vcode.sigs, i, regs, &mut self.vregs)
-                    .into_iter()
-                {
-                    self.emit(insn);
-                }
-            }
-            if let Some(insn) = self
-                .vcode
-                .vcode
-                .abi
-                .gen_retval_area_setup(&self.vcode.vcode.sigs, &mut self.vregs)
-            {
-                self.emit(insn);
-            }
-
-            // The `args` instruction below must come first. Finish
-            // the current "IR inst" (with a default source location,
-            // as for other special instructions inserted during
-            // lowering) and continue the scan backward.
-            self.finish_ir_inst(Default::default());
-
-            if let Some(insn) = self.vcode.vcode.abi.take_args() {
-                self.emit(insn);
-            }
-        }
-    }
-
-    /// Generate the return instruction.
-    pub fn gen_return(&mut self, rets: Vec<ValueRegs<Reg>>) {
-        let mut out_rets = vec![];
-
-        let mut rets = rets.into_iter();
-        for (i, ret) in self
-            .abi()
-            .signature()
-            .returns
-            .clone()
-            .into_iter()
-            .enumerate()
-        {
-            let regs = if ret.purpose == ArgumentPurpose::StructReturn {
-                self.sret_reg.unwrap().clone()
-            } else {
-                rets.next().unwrap()
-            };
-
-            let (regs, insns) = self.vcode.abi().gen_copy_regs_to_retval(
-                self.vcode.sigs(),
-                i,
-                regs,
-                &mut self.vregs,
-            );
-            out_rets.extend(regs);
-            for insn in insns {
-                self.emit(insn);
-            }
-        }
-
-        // Hack: generate a virtual instruction that uses vmctx in
-        // order to keep it alive for the duration of the function,
-        // for the benefit of debuginfo.
-        if self.f.dfg.values_labels.is_some() {
-            if let Some(vmctx_val) = self.f.special_param(ArgumentPurpose::VMContext) {
-                if self.value_ir_uses[vmctx_val] != ValueUseState::Unused {
-                    let vmctx_reg = self.value_regs[vmctx_val].only_reg().unwrap();
-                    self.emit(I::gen_dummy_use(vmctx_reg));
-                }
-            }
-        }
-
-        let inst = self.abi().gen_rets(out_rets);
-        self.emit(inst);
-    }
-
-    /// Has this instruction been sunk to a use-site (i.e., away from its
-    /// original location)?
-    fn is_inst_sunk(&self, inst: Inst) -> bool {
-        self.inst_sunk.contains(&inst)
-    }
-
-    // Is any result of this instruction needed?
-    fn is_any_inst_result_needed(&self, inst: Inst) -> bool {
-        self.f
-            .dfg
-            .inst_results(inst)
-            .iter()
-            .any(|&result| self.value_lowered_uses[result] > 0)
-    }
-
-    fn lower_clif_block<B: LowerBackend<MInst = I>>(
-        &mut self,
-        backend: &B,
-        block: Block,
-        ctrl_plane: &mut ControlPlane,
-    ) -> CodegenResult<()> {
-        self.cur_scan_entry_color = Some(self.block_end_colors[block]);
-        // Lowering loop:
-        // - For each non-branch instruction, in reverse order:
-        //   - If side-effecting (load, store, branch/call/return,
-        //     possible trap), or if used outside of this block, or if
-        //     demanded by another inst, then lower.
-        //
-        // That's it! Lowering of side-effecting ops will force all *needed*
-        // (live) non-side-effecting ops to be lowered at the right places, via
-        // the `use_input_reg()` callback on the `Lower` (that's us). That's
-        // because `use_input_reg()` sets the eager/demand bit for any insts
-        // whose result registers are used.
-        //
-        // We set the VCodeBuilder to "backward" mode, so we emit
-        // blocks in reverse order wrt the BlockIndex sequence, and
-        // emit instructions in reverse order within blocks.  Because
-        // the machine backend calls `ctx.emit()` in forward order, we
-        // collect per-IR-inst lowered instructions in `ir_insts`,
-        // then reverse these and append to the VCode at the end of
-        // each IR instruction.
-        for inst in self.f.layout.block_insts(block).rev() {
-            let data = &self.f.dfg.insts[inst];
-            let has_side_effect = has_lowering_side_effect(self.f, inst);
-            // If  inst has been sunk to another location, skip it.
-            if self.is_inst_sunk(inst) {
-                continue;
-            }
-            // Are any outputs used at least once?
-            let value_needed = self.is_any_inst_result_needed(inst);
-            trace!(
-                "lower_clif_block: block {} inst {} ({:?}) is_branch {} side_effect {} value_needed {}",
-                block,
-                inst,
-                data,
-                data.opcode().is_branch(),
-                has_side_effect,
-                value_needed,
-            );
-
-            // Update scan state to color prior to this inst (as we are scanning
-            // backward).
-            self.cur_inst = Some(inst);
-            if has_side_effect {
-                let entry_color = *self
-                    .side_effect_inst_entry_colors
-                    .get(&inst)
-                    .expect("every side-effecting inst should have a color-map entry");
-                self.cur_scan_entry_color = Some(entry_color);
-            }
-
-            // Skip lowering branches; these are handled separately
-            // (see `lower_clif_branches()` below).
-            if self.f.dfg.insts[inst].opcode().is_branch() {
-                continue;
-            }
-
-            // Normal instruction: codegen if the instruction is side-effecting
-            // or any of its outputs is used.
-            if has_side_effect || value_needed {
-                trace!("lowering: inst {}: {:?}", inst, self.f.dfg.insts[inst]);
-                let temp_regs = backend.lower(self, inst).unwrap_or_else(|| {
-                    let ty = if self.num_outputs(inst) > 0 {
-                        Some(self.output_ty(inst, 0))
-                    } else {
-                        None
-                    };
-                    panic!(
-                        "should be implemented in ISLE: inst = `{}`, type = `{:?}`",
-                        self.f.dfg.display_inst(inst),
-                        ty
-                    )
-                });
-
-                // The ISLE generated code emits its own registers to define the
-                // instruction's lowered values in. However, other instructions
-                // that use this SSA value will be lowered assuming that the value
-                // is generated into a pre-assigned, different, register.
-                //
-                // To connect the two, we set up "aliases" in the VCodeBuilder
-                // that apply when it is building the Operand table for the
-                // regalloc to use. These aliases effectively rewrite any use of
-                // the pre-assigned register to the register that was returned by
-                // the ISLE lowering logic.
-                let results = self.f.dfg.inst_results(inst);
-                debug_assert_eq!(temp_regs.len(), results.len());
-                for (regs, &result) in temp_regs.iter().zip(results) {
-                    let dsts = self.value_regs[result];
-                    debug_assert_eq!(regs.len(), dsts.len());
-                    for (&dst, &temp) in dsts.regs().iter().zip(regs.regs()) {
-                        trace!("set vreg alias: {result:?} = {dst:?}, lowering = {temp:?}");
-                        self.vregs.set_vreg_alias(dst, temp);
-                    }
-                }
-            }
-
-            let loc = self.srcloc(inst);
-            self.finish_ir_inst(loc);
-
-            // maybe insert random instruction
-            if ctrl_plane.get_decision() {
-                if ctrl_plane.get_decision() {
-                    let imm: u64 = ctrl_plane.get_arbitrary();
-                    let reg = self.alloc_tmp(crate::ir::types::I64).regs()[0];
-                    I::gen_imm_u64(imm, reg).map(|inst| self.emit(inst));
-                } else {
-                    let imm: f64 = ctrl_plane.get_arbitrary();
-                    let tmp = self.alloc_tmp(crate::ir::types::I64).regs()[0];
-                    let reg = self.alloc_tmp(crate::ir::types::F64).regs()[0];
-                    for inst in I::gen_imm_f64(imm, tmp, reg) {
-                        self.emit(inst);
-                    }
-                }
-            }
-
-            // Emit value-label markers if needed, to later recover
-            // debug mappings. This must happen before the instruction
-            // (so after we emit, in bottom-to-top pass).
-            self.emit_value_label_markers_for_inst(inst);
-        }
-
-        // Add the block params to this block.
-        self.add_block_params(block)?;
-
-        self.cur_scan_entry_color = None;
-        Ok(())
-    }
-
-    fn add_block_params(&mut self, block: Block) -> CodegenResult<()> {
-        for &param in self.f.dfg.block_params(block) {
-            for &reg in self.value_regs[param].regs() {
-                let vreg = reg.to_virtual_reg().unwrap();
-                self.vcode.add_block_param(vreg);
-            }
-        }
-        Ok(())
-    }
-
-    fn get_value_labels<'a>(&'a self, val: Value, depth: usize) -> Option<&'a [ValueLabelStart]> {
-        if let Some(ref values_labels) = self.f.dfg.values_labels {
-            debug_assert!(self.f.dfg.value_is_real(val));
-            trace!(
-                "get_value_labels: val {} -> {:?}",
-                val,
-                values_labels.get(&val)
-            );
-            match values_labels.get(&val) {
-                Some(&ValueLabelAssignments::Starts(ref list)) => Some(&list[..]),
-                Some(&ValueLabelAssignments::Alias { value, .. }) if depth < 10 => {
-                    self.get_value_labels(value, depth + 1)
-                }
-                _ => None,
-            }
-        } else {
-            None
-        }
-    }
-
-    fn emit_value_label_marks_for_value(&mut self, val: Value) {
-        let regs = self.value_regs[val];
-        if regs.len() > 1 {
-            return;
-        }
-        let reg = regs.only_reg().unwrap();
-
-        if let Some(label_starts) = self.get_value_labels(val, 0) {
-            let labels = label_starts
-                .iter()
-                .map(|&ValueLabelStart { label, .. }| label)
-                .collect::<FxHashSet<_>>();
-            for label in labels {
-                trace!(
-                    "value labeling: defines val {:?} -> reg {:?} -> label {:?}",
-                    val,
-                    reg,
-                    label,
-                );
-                self.vcode.add_value_label(reg, label);
-            }
-        }
-    }
-
-    fn emit_value_label_markers_for_inst(&mut self, inst: Inst) {
-        if self.f.dfg.values_labels.is_none() {
-            return;
-        }
-
-        trace!(
-            "value labeling: srcloc {}: inst {}",
-            self.srcloc(inst),
-            inst
-        );
-        for &val in self.f.dfg.inst_results(inst) {
-            self.emit_value_label_marks_for_value(val);
-        }
-    }
-
-    fn emit_value_label_markers_for_block_args(&mut self, block: Block) {
-        if self.f.dfg.values_labels.is_none() {
-            return;
-        }
-
-        trace!("value labeling: block {}", block);
-        for &arg in self.f.dfg.block_params(block) {
-            self.emit_value_label_marks_for_value(arg);
-        }
-        self.finish_ir_inst(Default::default());
-    }
-
-    fn finish_ir_inst(&mut self, loc: RelSourceLoc) {
-        // The VCodeBuilder builds in reverse order (and reverses at
-        // the end), but `ir_insts` is in forward order, so reverse
-        // it.
-        for inst in self.ir_insts.drain(..).rev() {
-            self.vcode.push(inst, loc);
-        }
-    }
-
-    fn finish_bb(&mut self) {
-        self.vcode.end_bb();
-    }
-
-    fn lower_clif_branches<B: LowerBackend<MInst = I>>(
-        &mut self,
-        backend: &B,
-        // Lowered block index:
-        bindex: BlockIndex,
-        // Original CLIF block:
-        block: Block,
-        branch: Inst,
-        targets: &[MachLabel],
-    ) -> CodegenResult<()> {
-        trace!(
-            "lower_clif_branches: block {} branch {:?} targets {:?}",
-            block,
-            branch,
-            targets,
-        );
-        // When considering code-motion opportunities, consider the current
-        // program point to be this branch.
-        self.cur_inst = Some(branch);
-
-        // Lower the branch in ISLE.
-        backend
-            .lower_branch(self, branch, targets)
-            .unwrap_or_else(|| {
-                panic!(
-                    "should be implemented in ISLE: branch = `{}`",
-                    self.f.dfg.display_inst(branch),
-                )
-            });
-        let loc = self.srcloc(branch);
-        self.finish_ir_inst(loc);
-        // Add block param outputs for current block.
-        self.lower_branch_blockparam_args(bindex);
-        Ok(())
-    }
-
-    fn lower_branch_blockparam_args(&mut self, block: BlockIndex) {
-        // TODO: why not make `block_order` public?
-        for succ_idx in 0..self.vcode.block_order().succ_indices(block).1.len() {
-            // Avoid immutable borrow by explicitly indexing.
-            let (opt_inst, succs) = self.vcode.block_order().succ_indices(block);
-            let inst = opt_inst.expect("lower_branch_blockparam_args called on a critical edge!");
-            let succ = succs[succ_idx];
-
-            // The use of `succ_idx` to index `branch_destination` is valid on the assumption that
-            // the traversal order defined in `visit_block_succs` mirrors the order returned by
-            // `branch_destination`. If that assumption is violated, the branch targets returned
-            // here will not match the clif.
-            let branches = self.f.dfg.insts[inst].branch_destination(&self.f.dfg.jump_tables);
-            let branch_args = branches[succ_idx].args_slice(&self.f.dfg.value_lists);
-
-            let mut branch_arg_vregs: SmallVec<[Reg; 16]> = smallvec![];
-            for &arg in branch_args {
-                debug_assert!(self.f.dfg.value_is_real(arg));
-                let regs = self.put_value_in_regs(arg);
-                branch_arg_vregs.extend_from_slice(regs.regs());
-            }
-            self.vcode.add_succ(succ, &branch_arg_vregs[..]);
-        }
-    }
-
-    fn collect_branches_and_targets(
-        &self,
-        bindex: BlockIndex,
-        _bb: Block,
-        targets: &mut SmallVec<[MachLabel; 2]>,
-    ) -> Option<Inst> {
-        targets.clear();
-        let (opt_inst, succs) = self.vcode.block_order().succ_indices(bindex);
-        targets.extend(succs.iter().map(|succ| MachLabel::from_block(*succ)));
-        opt_inst
-    }
-
-    /// Lower the function.
-    pub fn lower<B: LowerBackend<MInst = I>>(
-        mut self,
-        backend: &B,
-        ctrl_plane: &mut ControlPlane,
-    ) -> CodegenResult<VCode<I>> {
-        trace!("about to lower function: {:?}", self.f);
-
-        self.vcode.init_retval_area(&mut self.vregs)?;
-
-        // Get the pinned reg here (we only parameterize this function on `B`,
-        // not the whole `Lower` impl).
-        self.pinned_reg = backend.maybe_pinned_reg();
-
-        self.vcode.set_entry(BlockIndex::new(0));
-
-        // Reused vectors for branch lowering.
-        let mut targets: SmallVec<[MachLabel; 2]> = SmallVec::new();
-
-        // get a copy of the lowered order; we hold this separately because we
-        // need a mut ref to the vcode to mutate it below.
-        let lowered_order: SmallVec<[LoweredBlock; 64]> = self
-            .vcode
-            .block_order()
-            .lowered_order()
-            .iter()
-            .cloned()
-            .collect();
-
-        // Main lowering loop over lowered blocks.
-        for (bindex, lb) in lowered_order.iter().enumerate().rev() {
-            let bindex = BlockIndex::new(bindex);
-
-            // Lower the block body in reverse order (see comment in
-            // `lower_clif_block()` for rationale).
-
-            // End branches.
-            if let Some(bb) = lb.orig_block() {
-                if let Some(branch) = self.collect_branches_and_targets(bindex, bb, &mut targets) {
-                    self.lower_clif_branches(backend, bindex, bb, branch, &targets)?;
-                    self.finish_ir_inst(self.srcloc(branch));
-                }
-            } else {
-                // If no orig block, this must be a pure edge block;
-                // get the successor and emit a jump. Add block params
-                // according to the one successor, and pass them
-                // through; note that the successor must have an
-                // original block.
-                let (_, succs) = self.vcode.block_order().succ_indices(bindex);
-                let succ = succs[0];
-
-                let orig_succ = lowered_order[succ.index()];
-                let orig_succ = orig_succ
-                    .orig_block()
-                    .expect("Edge block succ must be body block");
-
-                let mut branch_arg_vregs: SmallVec<[Reg; 16]> = smallvec![];
-                for ty in self.f.dfg.block_param_types(orig_succ) {
-                    let regs = self.vregs.alloc(ty)?;
-                    for &reg in regs.regs() {
-                        branch_arg_vregs.push(reg);
-                        let vreg = reg.to_virtual_reg().unwrap();
-                        self.vcode.add_block_param(vreg);
-                    }
-                }
-                self.vcode.add_succ(succ, &branch_arg_vregs[..]);
-
-                self.emit(I::gen_jump(MachLabel::from_block(succ)));
-                self.finish_ir_inst(Default::default());
-            }
-
-            // Original block body.
-            if let Some(bb) = lb.orig_block() {
-                self.lower_clif_block(backend, bb, ctrl_plane)?;
-                self.emit_value_label_markers_for_block_args(bb);
-            }
-
-            if bindex.index() == 0 {
-                // Set up the function with arg vreg inits.
-                self.gen_arg_setup();
-                self.finish_ir_inst(Default::default());
-            }
-
-            self.finish_bb();
-
-            // Check for any deferred vreg-temp allocation errors, and
-            // bubble one up at this time if it exists.
-            if let Some(e) = self.vregs.take_deferred_error() {
-                return Err(e);
-            }
-        }
-
-        // Now that we've emitted all instructions into the
-        // VCodeBuilder, let's build the VCode.
-        trace!(
-            "built vcode:\n{:?}Backwards {:?}",
-            &self.vregs,
-            &self.vcode.vcode
-        );
-        let vcode = self.vcode.build(self.vregs);
-
-        Ok(vcode)
-    }
-}
-
-/// Function-level queries.
-impl<'func, I: VCodeInst> Lower<'func, I> {
-    pub fn dfg(&self) -> &DataFlowGraph {
-        &self.f.dfg
-    }
-
-    /// Get the `Callee`.
-    pub fn abi(&self) -> &Callee<I::ABIMachineSpec> {
-        self.vcode.abi()
-    }
-
-    /// Get the `Callee`.
-    pub fn abi_mut(&mut self) -> &mut Callee<I::ABIMachineSpec> {
-        self.vcode.abi_mut()
-    }
-}
-
-/// Instruction input/output queries.
-impl<'func, I: VCodeInst> Lower<'func, I> {
-    /// Get the instdata for a given IR instruction.
-    pub fn data(&self, ir_inst: Inst) -> &InstructionData {
-        &self.f.dfg.insts[ir_inst]
-    }
-
-    /// Likewise, but starting with a GlobalValue identifier.
-    pub fn symbol_value_data<'b>(
-        &'b self,
-        global_value: GlobalValue,
-    ) -> Option<(&'b ExternalName, RelocDistance, i64)> {
-        let gvdata = &self.f.global_values[global_value];
-        match gvdata {
-            &GlobalValueData::Symbol {
-                ref name,
-                ref offset,
-                colocated,
-                ..
-            } => {
-                let offset = offset.bits();
-                let dist = if colocated {
-                    RelocDistance::Near
-                } else {
-                    RelocDistance::Far
-                };
-                Some((name, dist, offset))
-            }
-            _ => None,
-        }
-    }
-
-    /// Returns the memory flags of a given memory access.
-    pub fn memflags(&self, ir_inst: Inst) -> Option<MemFlags> {
-        match &self.f.dfg.insts[ir_inst] {
-            &InstructionData::AtomicCas { flags, .. } => Some(flags),
-            &InstructionData::AtomicRmw { flags, .. } => Some(flags),
-            &InstructionData::Load { flags, .. }
-            | &InstructionData::LoadNoOffset { flags, .. }
-            | &InstructionData::Store { flags, .. } => Some(flags),
-            &InstructionData::StoreNoOffset { flags, .. } => Some(flags),
-            _ => None,
-        }
-    }
-
-    /// Get the source location for a given instruction.
-    pub fn srcloc(&self, ir_inst: Inst) -> RelSourceLoc {
-        self.f.rel_srclocs()[ir_inst]
-    }
-
-    /// Get the number of inputs to the given IR instruction. This is a count only of the Value
-    /// arguments to the instruction: block arguments will not be included in this count.
-    pub fn num_inputs(&self, ir_inst: Inst) -> usize {
-        self.f.dfg.inst_args(ir_inst).len()
-    }
-
-    /// Get the number of outputs to the given IR instruction.
-    pub fn num_outputs(&self, ir_inst: Inst) -> usize {
-        self.f.dfg.inst_results(ir_inst).len()
-    }
-
-    /// Get the type for an instruction's input.
-    pub fn input_ty(&self, ir_inst: Inst, idx: usize) -> Type {
-        self.value_ty(self.input_as_value(ir_inst, idx))
-    }
-
-    /// Get the type for a value.
-    pub fn value_ty(&self, val: Value) -> Type {
-        self.f.dfg.value_type(val)
-    }
-
-    /// Get the type for an instruction's output.
-    pub fn output_ty(&self, ir_inst: Inst, idx: usize) -> Type {
-        self.f.dfg.value_type(self.f.dfg.inst_results(ir_inst)[idx])
-    }
-
-    /// Get the value of a constant instruction (`iconst`, etc.) as a 64-bit
-    /// value, if possible.
-    pub fn get_constant(&self, ir_inst: Inst) -> Option<u64> {
-        self.inst_constants.get(&ir_inst).map(|&c| {
-            // The upper bits must be zero, enforced during legalization and by
-            // the CLIF verifier.
-            debug_assert_eq!(c, {
-                let input_size = self.output_ty(ir_inst, 0).bits() as u64;
-                let shift = 64 - input_size;
-                (c << shift) >> shift
-            });
-            c
-        })
-    }
-
-    /// Get the input as one of two options other than a direct register:
-    ///
-    /// - An instruction, given that it is effect-free or able to sink its
-    ///   effect to the current instruction being lowered, and given it has only
-    ///   one output, and if effect-ful, given that this is the only use;
-    /// - A constant, if the value is a constant.
-    ///
-    /// The instruction input may be available in either of these forms.  It may
-    /// be available in neither form, if the conditions are not met; if so, use
-    /// `put_input_in_regs()` instead to get it in a register.
-    ///
-    /// If the backend merges the effect of a side-effecting instruction, it
-    /// must call `sink_inst()`. When this is called, it indicates that the
-    /// effect has been sunk to the current scan location. The sunk
-    /// instruction's result(s) must have *no* uses remaining, because it will
-    /// not be codegen'd (it has been integrated into the current instruction).
-    pub fn input_as_value(&self, ir_inst: Inst, idx: usize) -> Value {
-        let val = self.f.dfg.inst_args(ir_inst)[idx];
-        debug_assert!(self.f.dfg.value_is_real(val));
-        val
-    }
-
-    /// Like `get_input_as_source_or_const` but with a `Value`.
-    pub fn get_input_as_source_or_const(&self, ir_inst: Inst, idx: usize) -> NonRegInput {
-        let val = self.input_as_value(ir_inst, idx);
-        self.get_value_as_source_or_const(val)
-    }
-
-    /// Resolves a particular input of an instruction to the `Value` that it is
-    /// represented with.
-    pub fn get_value_as_source_or_const(&self, val: Value) -> NonRegInput {
-        trace!(
-            "get_input_for_val: val {} at cur_inst {:?} cur_scan_entry_color {:?}",
-            val,
-            self.cur_inst,
-            self.cur_scan_entry_color,
-        );
-        let inst = match self.f.dfg.value_def(val) {
-            // OK to merge source instruction if (i) we have a source
-            // instruction, and:
-            // - It has no side-effects, OR
-            // - It has a side-effect, has one output value, that one
-            //   output has only one use, directly or indirectly (so
-            //   cannot be duplicated -- see comment on
-            //   `ValueUseState`), and the instruction's color is *one
-            //   less than* the current scan color.
-            //
-            //   This latter set of conditions is testing whether a
-            //   side-effecting instruction can sink to the current scan
-            //   location; this is possible if the in-color of this inst is
-            //   equal to the out-color of the producing inst, so no other
-            //   side-effecting ops occur between them (which will only be true
-            //   if they are in the same BB, because color increments at each BB
-            //   start).
-            //
-            //   If it is actually sunk, then in `merge_inst()`, we update the
-            //   scan color so that as we scan over the range past which the
-            //   instruction was sunk, we allow other instructions (that came
-            //   prior to the sunk instruction) to sink.
-            ValueDef::Result(src_inst, result_idx) => {
-                let src_side_effect = has_lowering_side_effect(self.f, src_inst);
-                trace!(" -> src inst {}", src_inst);
-                trace!(" -> has lowering side effect: {}", src_side_effect);
-                if !src_side_effect {
-                    // Pure instruction: always possible to
-                    // sink. Let's determine whether we are the only
-                    // user or not.
-                    if self.value_ir_uses[val] == ValueUseState::Once {
-                        InputSourceInst::UniqueUse(src_inst, result_idx)
-                    } else {
-                        InputSourceInst::Use(src_inst, result_idx)
-                    }
-                } else {
-                    // Side-effect: test whether this is the only use of the
-                    // only result of the instruction, and whether colors allow
-                    // the code-motion.
-                    trace!(
-                        " -> side-effecting op {} for val {}: use state {:?}",
-                        src_inst,
-                        val,
-                        self.value_ir_uses[val]
-                    );
-                    if self.cur_scan_entry_color.is_some()
-                        && self.value_ir_uses[val] == ValueUseState::Once
-                        && self.num_outputs(src_inst) == 1
-                        && self
-                            .side_effect_inst_entry_colors
-                            .get(&src_inst)
-                            .unwrap()
-                            .get()
-                            + 1
-                            == self.cur_scan_entry_color.unwrap().get()
-                    {
-                        InputSourceInst::UniqueUse(src_inst, 0)
-                    } else {
-                        InputSourceInst::None
-                    }
-                }
-            }
-            _ => InputSourceInst::None,
-        };
-        let constant = inst.as_inst().and_then(|(inst, _)| self.get_constant(inst));
-
-        NonRegInput { inst, constant }
-    }
-
-    /// Increment the reference count for the Value, ensuring that it gets lowered.
-    pub fn increment_lowered_uses(&mut self, val: Value) {
-        self.value_lowered_uses[val] += 1
-    }
-
-    /// Put the `idx`th input into register(s) and return the assigned register.
-    pub fn put_input_in_regs(&mut self, ir_inst: Inst, idx: usize) -> ValueRegs<Reg> {
-        let val = self.f.dfg.inst_args(ir_inst)[idx];
-        self.put_value_in_regs(val)
-    }
-
-    /// Put the given value into register(s) and return the assigned register.
-    pub fn put_value_in_regs(&mut self, val: Value) -> ValueRegs<Reg> {
-        debug_assert!(self.f.dfg.value_is_real(val));
-        trace!("put_value_in_regs: val {}", val);
-
-        if let Some(inst) = self.f.dfg.value_def(val).inst() {
-            assert!(!self.inst_sunk.contains(&inst));
-        }
-
-        let regs = self.value_regs[val];
-        trace!(" -> regs {:?}", regs);
-        assert!(regs.is_valid());
-
-        self.value_lowered_uses[val] += 1;
-
-        regs
-    }
-}
-
-/// Codegen primitives: allocate temps, emit instructions, set result registers,
-/// ask for an input to be gen'd into a register.
-impl<'func, I: VCodeInst> Lower<'func, I> {
-    /// Get a new temp.
-    pub fn alloc_tmp(&mut self, ty: Type) -> ValueRegs<Writable<Reg>> {
-        writable_value_regs(self.vregs.alloc_with_deferred_error(ty))
-    }
-
-    /// Emit a machine instruction.
-    pub fn emit(&mut self, mach_inst: I) {
-        trace!("emit: {:?}", mach_inst);
-        self.ir_insts.push(mach_inst);
-    }
-
-    /// Indicate that the side-effect of an instruction has been sunk to the
-    /// current scan location. This should only be done with the instruction's
-    /// original results are not used (i.e., `put_input_in_regs` is not invoked
-    /// for the input produced by the sunk instruction), otherwise the
-    /// side-effect will occur twice.
-    pub fn sink_inst(&mut self, ir_inst: Inst) {
-        assert!(has_lowering_side_effect(self.f, ir_inst));
-        assert!(self.cur_scan_entry_color.is_some());
-
-        for result in self.dfg().inst_results(ir_inst) {
-            assert!(self.value_lowered_uses[*result] == 0);
-        }
-
-        let sunk_inst_entry_color = self
-            .side_effect_inst_entry_colors
-            .get(&ir_inst)
-            .cloned()
-            .unwrap();
-        let sunk_inst_exit_color = InstColor::new(sunk_inst_entry_color.get() + 1);
-        assert!(sunk_inst_exit_color == self.cur_scan_entry_color.unwrap());
-        self.cur_scan_entry_color = Some(sunk_inst_entry_color);
-        self.inst_sunk.insert(ir_inst);
-    }
-
-    /// Retrieve immediate data given a handle.
-    pub fn get_immediate_data(&self, imm: Immediate) -> &ConstantData {
-        self.f.dfg.immediates.get(imm).unwrap()
-    }
-
-    /// Retrieve constant data given a handle.
-    pub fn get_constant_data(&self, constant_handle: Constant) -> &ConstantData {
-        self.f.dfg.constants.get(constant_handle)
-    }
-
-    /// Indicate that a constant should be emitted.
-    pub fn use_constant(&mut self, constant: VCodeConstantData) -> VCodeConstant {
-        self.vcode.constants().insert(constant)
-    }
-
-    /// Cause the value in `reg` to be in a virtual reg, by copying it into a new virtual reg
-    /// if `reg` is a real reg.  `ty` describes the type of the value in `reg`.
-    pub fn ensure_in_vreg(&mut self, reg: Reg, ty: Type) -> Reg {
-        if reg.to_virtual_reg().is_some() {
-            reg
-        } else {
-            let new_reg = self.alloc_tmp(ty).only_reg().unwrap();
-            self.emit(I::gen_move(new_reg, reg, ty));
-            new_reg.to_reg()
-        }
-    }
-
-    /// Add a range fact to a register, if no other fact is present.
-    pub fn add_range_fact(&mut self, reg: Reg, bit_width: u16, min: u64, max: u64) {
-        if self.flags.enable_pcc() {
-            self.vregs.set_fact_if_missing(
-                reg.to_virtual_reg().unwrap(),
-                Fact::Range {
-                    bit_width,
-                    min,
-                    max,
-                },
-            );
-        }
-    }
-}