wasmtime 22.0.0 → 23.0.2

data/ext/cargo-vendor/wasmtime-23.0.2/src/runtime/vm/instance/allocator/pooling/memory_pool.rs

@@ -0,0 +1,990 @@
+//! Implements a memory pool using a single allocated memory slab.
+//!
+//! The pooling instance allocator maps one large slab of memory in advance and
+//! allocates WebAssembly memories from this slab--a [`MemoryPool`]. Each
+//! WebAssembly memory is allocated in its own slot (see uses of `index` and
+//! [`SlotId`] in this module):
+//!
+//! ```text
+//! ┌──────┬──────┬──────┬──────┬──────┐
+//! │Slot 0│Slot 1│Slot 2│Slot 3│......│
+//! └──────┴──────┴──────┴──────┴──────┘
+//! ```
+//!
+//! Diving deeper, we note that a [`MemoryPool`] protects Wasmtime from
+//! out-of-bounds memory accesses by inserting inaccessible guard regions
+//! between memory slots. These guard regions are configured to raise a signal
+//! if they are accessed--a WebAssembly out-of-bounds (OOB) memory access. The
+//! [`MemoryPool`] documentation has a more detailed chart but one can think of
+//! memory slots being laid out like the following:
+//!
+//! ```text
+//! ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
+//! │Guard│Mem 0│Guard│Mem 1│Guard│Mem 2│.....│Guard│
+//! └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
+//! ```
+//!
+//! But we can be more efficient about guard regions: with memory protection
+//! keys (MPK) enabled, the interleaved guard regions can be smaller. If we
+//! surround a memory with memories from other instances and each instance is
+//! protected by different protection keys, the guard region can be smaller AND
+//! the pool will still raise a signal on an OOB access. This complicates how we
+//! lay out memory slots: we must store memories from the same instance in the
+//! same "stripe". Each stripe is protected by a different protection key.
+//!
+//! This concept, dubbed [ColorGuard] in the original paper, relies on careful
+//! calculation of the memory sizes to prevent any "overlapping access" (see
+//! [`calculate`]): there are limited protection keys available (15) so the next
+//! memory using the same key must be at least as far away as the guard region
+//! we would insert otherwise. This ends up looking like the following, where a
+//! store for instance 0 (`I0`) "stripes" two memories (`M0` and `M1`) with the
+//! same protection key 1 and far enough apart to signal an OOB access:
+//!
+//! ```text
+//! ┌─────┬─────┬─────┬─────┬────────────────┬─────┬─────┬─────┐
+//! │.....│I0:M1│.....│.....│.<enough slots>.│I0:M2│.....│.....│
+//! ├─────┼─────┼─────┼─────┼────────────────┼─────┼─────┼─────┤
+//! │.....│key 1│key 2│key 3│..<more keys>...│key 1│key 2│.....│
+//! └─────┴─────┴─────┴─────┴────────────────┴─────┴─────┴─────┘
+//! ```
+//!
+//! [ColorGuard]: https://plas2022.github.io/files/pdf/SegueColorGuard.pdf
+
+use super::{
+    index_allocator::{MemoryInModule, ModuleAffinityIndexAllocator, SlotId},
+    MemoryAllocationIndex,
+};
+use crate::runtime::vm::mpk::{self, ProtectionKey, ProtectionMask};
+use crate::runtime::vm::{
+    CompiledModuleId, InstanceAllocationRequest, InstanceLimits, Memory, MemoryImageSlot, Mmap,
+    MpkEnabled, PoolingInstanceAllocatorConfig,
+};
+use crate::{prelude::*, vm::round_usize_up_to_host_pages};
+use std::ffi::c_void;
+use std::sync::atomic::{AtomicUsize, Ordering};
+use std::sync::Mutex;
+use wasmtime_environ::{DefinedMemoryIndex, MemoryPlan, MemoryStyle, Module, Tunables};
+
+/// A set of allocator slots.
+///
+/// The allocated slots can be split by striping them: e.g., with two stripe
+/// colors 0 and 1, we would allocate all even slots using stripe 0 and all odd
+/// slots using stripe 1.
+///
+/// This is helpful for the use of protection keys: (a) if a request comes to
+/// allocate multiple instances, we can allocate them all from the same stripe
+/// and (b) if a store wants to allocate more from the same stripe it can.
+#[derive(Debug)]
+struct Stripe {
+    allocator: ModuleAffinityIndexAllocator,
+    pkey: Option<ProtectionKey>,
+}
+
+/// Represents a pool of WebAssembly linear memories.
+///
+/// A linear memory is divided into accessible pages and guard pages. A memory
+/// pool contains linear memories: each memory occupies a slot in an
+/// allocated slab (i.e., `mapping`):
+///
+/// ```text
+///          layout.max_memory_bytes                 layout.slot_bytes
+///                    |                                   |
+///              ◄─────┴────►                  ◄───────────┴──────────►
+/// ┌───────────┬────────────┬───────────┐     ┌───────────┬───────────┬───────────┐
+/// | PROT_NONE |            | PROT_NONE | ... |           | PROT_NONE | PROT_NONE |
+/// └───────────┴────────────┴───────────┘     └───────────┴───────────┴───────────┘
+/// |           |◄──────────────────┬─────────────────────────────────► ◄────┬────►
+/// |           |                   |                                        |
+/// mapping     |            `layout.num_slots` memories         layout.post_slab_guard_size
+///             |
+///   layout.pre_slab_guard_size
+/// ```
+#[derive(Debug)]
+pub struct MemoryPool {
+    mapping: Mmap,
+    /// This memory pool is stripe-aware. If using  memory protection keys, this
+    /// will contain one stripe per available key; otherwise, a single stripe
+    /// with an empty key.
+    stripes: Vec<Stripe>,
+
+    /// If using a copy-on-write allocation scheme, the slot management. We
+    /// dynamically transfer ownership of a slot to a Memory when in use.
+    image_slots: Vec<Mutex<Option<MemoryImageSlot>>>,
+
+    /// A description of the various memory sizes used in allocating the
+    /// `mapping` slab.
+    layout: SlabLayout,
+
+    /// The maximum number of memories that a single core module instance may
+    /// use.
+    ///
+    /// NB: this is needed for validation but does not affect the pool's size.
+    memories_per_instance: usize,
+
+    /// How much linear memory, in bytes, to keep resident after resetting for
+    /// use with the next instance. This much memory will be `memset` to zero
+    /// when a linear memory is deallocated.
+    ///
+    /// Memory exceeding this amount in the wasm linear memory will be released
+    /// with `madvise` back to the kernel.
+    ///
+    /// Only applicable on Linux.
+    pub(super) keep_resident: usize,
+
+    /// Keep track of protection keys handed out to initialized stores; this
+    /// allows us to round-robin the assignment of stores to stripes.
+    next_available_pkey: AtomicUsize,
+}
+
+impl MemoryPool {
+    /// Create a new `MemoryPool`.
+    pub fn new(config: &PoolingInstanceAllocatorConfig, tunables: &Tunables) -> Result<Self> {
+        if u64::try_from(config.limits.max_memory_size).unwrap()
+            > tunables.static_memory_reservation
+        {
+            bail!(
+                "maximum memory size of {:#x} bytes exceeds the configured \
+                 static memory reservation of {:#x} bytes",
+                config.limits.max_memory_size,
+                tunables.static_memory_reservation
+            );
+        }
+        let pkeys = match config.memory_protection_keys {
+            MpkEnabled::Auto => {
+                if mpk::is_supported() {
+                    mpk::keys(config.max_memory_protection_keys)
+                } else {
+                    &[]
+                }
+            }
+            MpkEnabled::Enable => {
+                if mpk::is_supported() {
+                    mpk::keys(config.max_memory_protection_keys)
+                } else {
+                    bail!("mpk is disabled on this system")
+                }
+            }
+            MpkEnabled::Disable => &[],
+        };
+
+        // This is a tricky bit of global state: when creating a memory pool
+        // that uses memory protection keys, we ensure here that any host code
+        // will have access to all keys (i.e., stripes). It's only when we enter
+        // the WebAssembly guest code (see `StoreInner::call_hook`) that we
+        // enforce which keys/stripes can be accessed. Be forewarned about the
+        // assumptions here:
+        // - we expect this "allow all" configuration to reset the default
+        //   process state (only allow key 0) _before_ any memories are accessed
+        // - and we expect no other code (e.g., host-side code) to modify this
+        //   global MPK configuration
+        if !pkeys.is_empty() {
+            mpk::allow(ProtectionMask::all());
+        }
+
+        // Create a slab layout and allocate it as a completely inaccessible
+        // region to start--`PROT_NONE`.
+        let constraints = SlabConstraints::new(&config.limits, tunables, pkeys.len())?;
+        let layout = calculate(&constraints)?;
+        log::debug!(
+            "creating memory pool: {constraints:?} -> {layout:?} (total: {})",
+            layout.total_slab_bytes()?
+        );
+        let mut mapping = Mmap::accessible_reserved(0, layout.total_slab_bytes()?)
+            .context("failed to create memory pool mapping")?;
+
+        // Then, stripe the memory with the available protection keys. This is
+        // unnecessary if there is only one stripe color.
+        if layout.num_stripes >= 2 {
+            let mut cursor = layout.pre_slab_guard_bytes;
+            let pkeys = &pkeys[..layout.num_stripes];
+            for i in 0..constraints.num_slots {
+                let pkey = &pkeys[i % pkeys.len()];
+                let region = unsafe { mapping.slice_mut(cursor..cursor + layout.slot_bytes) };
+                pkey.protect(region)?;
+                cursor += layout.slot_bytes;
+            }
+            debug_assert_eq!(
+                cursor + layout.post_slab_guard_bytes,
+                layout.total_slab_bytes()?
+            );
+        }
+
+        let image_slots: Vec<_> = std::iter::repeat_with(|| Mutex::new(None))
+            .take(constraints.num_slots)
+            .collect();
+
+        let create_stripe = |i| {
+            let num_slots = constraints.num_slots / layout.num_stripes
+                + usize::from(constraints.num_slots % layout.num_stripes > i);
+            let allocator = ModuleAffinityIndexAllocator::new(
+                num_slots.try_into().unwrap(),
+                config.max_unused_warm_slots,
+            );
+            Stripe {
+                allocator,
+                pkey: pkeys.get(i).cloned(),
+            }
+        };
+
+        debug_assert!(layout.num_stripes > 0);
+        let stripes: Vec<_> = (0..layout.num_stripes)
+            .into_iter()
+            .map(create_stripe)
+            .collect();
+
+        let pool = Self {
+            stripes,
+            mapping,
+            image_slots,
+            layout,
+            memories_per_instance: usize::try_from(config.limits.max_memories_per_module).unwrap(),
+            keep_resident: round_usize_up_to_host_pages(config.linear_memory_keep_resident)?,
+            next_available_pkey: AtomicUsize::new(0),
+        };
+
+        Ok(pool)
+    }
+
+    /// Return a protection key that stores can use for requesting new
+    pub fn next_available_pkey(&self) -> Option<ProtectionKey> {
+        let index = self.next_available_pkey.fetch_add(1, Ordering::SeqCst) % self.stripes.len();
+        debug_assert!(
+            self.stripes.len() < 2 || self.stripes[index].pkey.is_some(),
+            "if we are using stripes, we cannot have an empty protection key"
+        );
+        self.stripes[index].pkey.clone()
+    }
+
+    /// Validate whether this memory pool supports the given module.
+    pub fn validate(&self, module: &Module) -> Result<()> {
+        let memories = module.memory_plans.len() - module.num_imported_memories;
+        if memories > usize::try_from(self.memories_per_instance).unwrap() {
+            bail!(
+                "defined memories count of {} exceeds the per-instance limit of {}",
+                memories,
+                self.memories_per_instance,
+            );
+        }
+
+        for (i, plan) in module
+            .memory_plans
+            .iter()
+            .skip(module.num_imported_memories)
+        {
+            match plan.style {
+                MemoryStyle::Static { byte_reservation } => {
+                    if u64::try_from(self.layout.bytes_to_next_stripe_slot()).unwrap()
+                        < byte_reservation
+                    {
+                        bail!(
+                            "memory size allocated per-memory is too small to \
+                             satisfy static bound of {byte_reservation:#x} bytes"
+                        );
+                    }
+                }
+                MemoryStyle::Dynamic { .. } => {}
+            }
+            let min = plan.memory.minimum_byte_size().with_context(|| {
+                format!(
+                    "memory index {} has a minimum byte size that cannot be represented in a u64",
+                    i.as_u32()
+                )
+            })?;
+            if min > u64::try_from(self.layout.max_memory_bytes).unwrap() {
+                bail!(
+                    "memory index {} has a minimum byte size of {} which exceeds the limit of {} bytes",
+                    i.as_u32(),
+                    min,
+                    self.layout.max_memory_bytes,
+                );
+            }
+        }
+        Ok(())
+    }
+
+    /// Are zero slots in use right now?
+    #[allow(unused)] // some cfgs don't use this
+    pub fn is_empty(&self) -> bool {
+        self.stripes.iter().all(|s| s.allocator.is_empty())
+    }
+
+    /// Allocate a single memory for the given instance allocation request.
+    pub fn allocate(
+        &self,
+        request: &mut InstanceAllocationRequest,
+        memory_plan: &MemoryPlan,
+        memory_index: DefinedMemoryIndex,
+    ) -> Result<(MemoryAllocationIndex, Memory)> {
+        let stripe_index = if let Some(pkey) = &request.pkey {
+            pkey.as_stripe()
+        } else {
+            debug_assert!(self.stripes.len() < 2);
+            0
+        };
+
+        let striped_allocation_index = self.stripes[stripe_index]
+            .allocator
+            .alloc(
+                request
+                    .runtime_info
+                    .unique_id()
+                    .map(|id| MemoryInModule(id, memory_index)),
+            )
+            .map(|slot| StripedAllocationIndex(u32::try_from(slot.index()).unwrap()))
+            .ok_or_else(|| {
+                super::PoolConcurrencyLimitError::new(
+                    self.stripes[stripe_index].allocator.len(),
+                    format!("memory stripe {stripe_index}"),
+                )
+            })?;
+        let allocation_index =
+            striped_allocation_index.as_unstriped_slot_index(stripe_index, self.stripes.len());
+
+        match (|| {
+            // Double-check that the runtime requirements of the memory are
+            // satisfied by the configuration of this pooling allocator. This
+            // should be returned as an error through `validate_memory_plans`
+            // but double-check here to be sure.
+            match memory_plan.style {
+                MemoryStyle::Static { byte_reservation } => {
+                    assert!(
+                        byte_reservation
+                            <= u64::try_from(self.layout.bytes_to_next_stripe_slot()).unwrap()
+                    );
+                }
+                MemoryStyle::Dynamic { .. } => {}
+            }
+
+            let base_ptr = self.get_base(allocation_index);
+            let base_capacity = self.layout.max_memory_bytes;
+
+            let mut slot = self.take_memory_image_slot(allocation_index);
+            let image = request.runtime_info.memory_image(memory_index)?;
+            let initial_size = memory_plan
+                .memory
+                .minimum_byte_size()
+                .expect("min size checked in validation");
+
+            // If instantiation fails, we can propagate the error
+            // upward and drop the slot. This will cause the Drop
+            // handler to attempt to map the range with PROT_NONE
+            // memory, to reserve the space while releasing any
+            // stale mappings. The next use of this slot will then
+            // create a new slot that will try to map over
+            // this, returning errors as well if the mapping
+            // errors persist. The unmap-on-drop is best effort;
+            // if it fails, then we can still soundly continue
+            // using the rest of the pool and allowing the rest of
+            // the process to continue, because we never perform a
+            // mmap that would leave an open space for someone
+            // else to come in and map something.
+            slot.instantiate(initial_size as usize, image, memory_plan)?;
+
+            Memory::new_static(
+                memory_plan,
+                base_ptr,
+                base_capacity,
+                slot,
+                self.layout.bytes_to_next_stripe_slot(),
+                unsafe { &mut *request.store.get().unwrap() },
+            )
+        })() {
+            Ok(memory) => Ok((allocation_index, memory)),
+            Err(e) => {
+                self.stripes[stripe_index]
+                    .allocator
+                    .free(SlotId(striped_allocation_index.0));
+                Err(e)
+            }
+        }
+    }
+
+    /// Deallocate a previously-allocated memory.
+    ///
+    /// # Safety
+    ///
+    /// The memory must have been previously allocated from this pool and
+    /// assigned the given index, must currently be in an allocated state, and
+    /// must never be used again.
+    ///
+    /// The caller must have already called `clear_and_remain_ready` on the
+    /// memory's image and flushed any enqueued decommits for this memory.
+    pub unsafe fn deallocate(
+        &self,
+        allocation_index: MemoryAllocationIndex,
+        image: MemoryImageSlot,
+    ) {
+        self.return_memory_image_slot(allocation_index, image);
+
+        let (stripe_index, striped_allocation_index) =
+            StripedAllocationIndex::from_unstriped_slot_index(allocation_index, self.stripes.len());
+        self.stripes[stripe_index]
+            .allocator
+            .free(SlotId(striped_allocation_index.0));
+    }
+
+    /// Purging everything related to `module`.
+    pub fn purge_module(&self, module: CompiledModuleId) {
+        // This primarily means clearing out all of its memory images present in
+        // the virtual address space. Go through the index allocator for slots
+        // affine to `module` and reset them, freeing up the index when we're
+        // done.
+        //
+        // Note that this is only called when the specified `module` won't be
+        // allocated further (the module is being dropped) so this shouldn't hit
+        // any sort of infinite loop since this should be the final operation
+        // working with `module`.
+        //
+        // TODO: We are given a module id, but key affinity by pair of module id
+        // and defined memory index. We are missing any defined memory index or
+        // count of how many memories the module defines here. Therefore, we
+        // probe up to the maximum number of memories per instance. This is fine
+        // because that maximum is generally relatively small. If this method
+        // somehow ever gets hot because of unnecessary probing, we should
+        // either pass in the actual number of defined memories for the given
+        // module to this method, or keep a side table of all slots that are
+        // associated with a module (not just module and memory). The latter
+        // would require care to make sure that its maintenance wouldn't be too
+        // expensive for normal allocation/free operations.
+        for stripe in &self.stripes {
+            for i in 0..self.memories_per_instance {
+                use wasmtime_environ::EntityRef;
+                let memory_index = DefinedMemoryIndex::new(i);
+                while let Some(id) = stripe
+                    .allocator
+                    .alloc_affine_and_clear_affinity(module, memory_index)
+                {
+                    // Clear the image from the slot and, if successful, return it back
+                    // to our state. Note that on failure here the whole slot will get
+                    // paved over with an anonymous mapping.
+                    let index = MemoryAllocationIndex(id.0);
+                    let mut slot = self.take_memory_image_slot(index);
+                    if slot.remove_image().is_ok() {
+                        self.return_memory_image_slot(index, slot);
+                    }
+
+                    stripe.allocator.free(id);
+                }
+            }
+        }
+    }
+
+    fn get_base(&self, allocation_index: MemoryAllocationIndex) -> *mut u8 {
+        assert!(allocation_index.index() < self.layout.num_slots);
+        let offset =
+            self.layout.pre_slab_guard_bytes + allocation_index.index() * self.layout.slot_bytes;
+        unsafe { self.mapping.as_ptr().offset(offset as isize).cast_mut() }
+    }
+
+    /// Take ownership of the given image slot. Must be returned via
+    /// `return_memory_image_slot` when the instance is done using it.
+    fn take_memory_image_slot(&self, allocation_index: MemoryAllocationIndex) -> MemoryImageSlot {
+        let maybe_slot = self.image_slots[allocation_index.index()]
+            .lock()
+            .unwrap()
+            .take();
+
+        maybe_slot.unwrap_or_else(|| {
+            MemoryImageSlot::create(
+                self.get_base(allocation_index) as *mut c_void,
+                0,
+                self.layout.max_memory_bytes,
+            )
+        })
+    }
+
+    /// Return ownership of the given image slot.
+    fn return_memory_image_slot(
+        &self,
+        allocation_index: MemoryAllocationIndex,
+        slot: MemoryImageSlot,
+    ) {
+        assert!(!slot.is_dirty());
+        *self.image_slots[allocation_index.index()].lock().unwrap() = Some(slot);
+    }
+}
+
+impl Drop for MemoryPool {
+    fn drop(&mut self) {
+        // Clear the `clear_no_drop` flag (i.e., ask to *not* clear on
+        // drop) for all slots, and then drop them here. This is
+        // valid because the one `Mmap` that covers the whole region
+        // can just do its one munmap.
+        for mut slot in std::mem::take(&mut self.image_slots) {
+            if let Some(slot) = slot.get_mut().unwrap() {
+                slot.no_clear_on_drop();
+            }
+        }
+    }
+}
+
+/// The index of a memory allocation within an `InstanceAllocator`.
+#[derive(Clone, Copy, Debug, Eq, PartialEq, PartialOrd, Ord)]
+pub struct StripedAllocationIndex(u32);
+
+impl StripedAllocationIndex {
+    fn from_unstriped_slot_index(
+        index: MemoryAllocationIndex,
+        num_stripes: usize,
+    ) -> (usize, Self) {
+        let stripe_index = index.index() % num_stripes;
+        let num_stripes: u32 = num_stripes.try_into().unwrap();
+        let index_within_stripe = Self(index.0 / num_stripes);
+        (stripe_index, index_within_stripe)
+    }
+
+    fn as_unstriped_slot_index(self, stripe: usize, num_stripes: usize) -> MemoryAllocationIndex {
+        let num_stripes: u32 = num_stripes.try_into().unwrap();
+        let stripe: u32 = stripe.try_into().unwrap();
+        MemoryAllocationIndex(self.0 * num_stripes + stripe)
+    }
+}
+
+#[derive(Clone, Debug)]
+struct SlabConstraints {
+    /// Essentially, the `static_memory_bound`: this is an assumption that the
+    /// runtime and JIT compiler make about how much space will be guarded
+    /// between slots.
+    expected_slot_bytes: usize,
+    /// The maximum size of any memory in the pool.
+    max_memory_bytes: usize,
+    num_slots: usize,
+    num_pkeys_available: usize,
+    guard_bytes: usize,
+    guard_before_slots: bool,
+}
+
+impl SlabConstraints {
+    fn new(
+        limits: &InstanceLimits,
+        tunables: &Tunables,
+        num_pkeys_available: usize,
+    ) -> Result<Self> {
+        // `static_memory_reservation` is the configured number of bytes for a
+        // static memory slot (see `Config::static_memory_maximum_size`); even
+        // if the memory never grows to this size (e.g., it has a lower memory
+        // maximum), codegen will assume that this unused memory is mapped
+        // `PROT_NONE`. Typically `static_memory_bound` is 4GiB which helps
+        // elide most bounds checks. `MemoryPool` must respect this bound,
+        // though not explicitly: if we can achieve the same effect via
+        // MPK-protected stripes, the slot size can be lower than the
+        // `static_memory_bound`.
+        let expected_slot_bytes: usize = tunables
+            .static_memory_reservation
+            .try_into()
+            .context("static memory bound is too large")?;
+        let expected_slot_bytes = round_usize_up_to_host_pages(expected_slot_bytes)?;
+
+        let guard_bytes: usize = tunables
+            .static_memory_offset_guard_size
+            .try_into()
+            .context("guard region is too large")?;
+        let guard_bytes = round_usize_up_to_host_pages(guard_bytes)?;
+
+        let num_slots = limits
+            .total_memories
+            .try_into()
+            .context("too many memories")?;
+
+        let constraints = SlabConstraints {
+            max_memory_bytes: limits.max_memory_size,
+            num_slots,
+            expected_slot_bytes,
+            num_pkeys_available,
+            guard_bytes,
+            guard_before_slots: tunables.guard_before_linear_memory,
+        };
+        Ok(constraints)
+    }
+}
+
+#[derive(Debug)]
+struct SlabLayout {
+    /// The total number of slots available in the memory pool slab.
+    num_slots: usize,
+    /// The size of each slot in the memory pool; this contains the maximum
+    /// memory size (i.e., from WebAssembly or Wasmtime configuration) plus any
+    /// guard region after the memory to catch OOB access. On these guard
+    /// regions, note that:
+    /// - users can configure how aggressively (or not) to elide bounds checks
+    ///   via `Config::static_memory_guard_size` (see also:
+    ///   `memory_and_guard_size`)
+    /// - memory protection keys can compress the size of the guard region by
+    ///   placing slots from a different key (i.e., a stripe) in the guard
+    ///   region; this means the slot itself can be smaller and we can allocate
+    ///   more of them.
+    slot_bytes: usize,
+    /// The maximum size that can become accessible, in bytes, for each linear
+    /// memory. Guaranteed to be a whole number of Wasm pages.
+    max_memory_bytes: usize,
+    /// If necessary, the number of bytes to reserve as a guard region at the
+    /// beginning of the slab.
+    pre_slab_guard_bytes: usize,
+    /// Like `pre_slab_guard_bytes`, but at the end of the slab.
+    post_slab_guard_bytes: usize,
+    /// The number of stripes needed in the slab layout.
+    num_stripes: usize,
+}
+
+impl SlabLayout {
+    /// Return the total size of the slab, using the final layout (where `n =
+    /// num_slots`):
+    ///
+    /// ```text
+    /// ┌────────────────────┬──────┬──────┬───┬──────┬─────────────────────┐
+    /// │pre_slab_guard_bytes│slot 1│slot 2│...│slot n│post_slab_guard_bytes│
+    /// └────────────────────┴──────┴──────┴───┴──────┴─────────────────────┘
+    /// ```
+    fn total_slab_bytes(&self) -> Result<usize> {
+        self.slot_bytes
+            .checked_mul(self.num_slots)
+            .and_then(|c| c.checked_add(self.pre_slab_guard_bytes))
+            .and_then(|c| c.checked_add(self.post_slab_guard_bytes))
+            .ok_or_else(|| anyhow!("total size of memory reservation exceeds addressable memory"))
+    }
+
+    /// Returns the number of Wasm bytes from the beginning of one slot to the
+    /// next slot in the same stripe--this is the striped equivalent of
+    /// `static_memory_bound`. Recall that between slots of the same stripe we
+    /// will see a slot from every other stripe.
+    ///
+    /// For example, in a 3-stripe pool, this function measures the distance
+    /// from the beginning of slot 1 to slot 4, which are of the same stripe:
+    ///
+    /// ```text
+    ///  ◄────────────────────►
+    /// ┌────────┬──────┬──────┬────────┬───┐
+    /// │*slot 1*│slot 2│slot 3│*slot 4*│...|
+    /// └────────┴──────┴──────┴────────┴───┘
+    /// ```
+    fn bytes_to_next_stripe_slot(&self) -> usize {
+        self.slot_bytes * self.num_stripes
+    }
+}
+
+fn calculate(constraints: &SlabConstraints) -> Result<SlabLayout> {
+    let SlabConstraints {
+        max_memory_bytes,
+        num_slots,
+        expected_slot_bytes,
+        num_pkeys_available,
+        guard_bytes,
+        guard_before_slots,
+    } = *constraints;
+
+    // If the user specifies a guard region, we always need to allocate a
+    // `PROT_NONE` region for it before any memory slots. Recall that we can
+    // avoid bounds checks for loads and stores with immediates up to
+    // `guard_bytes`, but we rely on Wasmtime to emit bounds checks for any
+    // accesses greater than this.
+    let pre_slab_guard_bytes = if guard_before_slots { guard_bytes } else { 0 };
+
+    // To calculate the slot size, we start with the default configured size and
+    // attempt to chip away at this via MPK protection. Note here how we begin
+    // to define a slot as "all of the memory and guard region."
+    let faulting_region_bytes = expected_slot_bytes
+        .max(max_memory_bytes)
+        .saturating_add(guard_bytes);
+
+    let (num_stripes, slot_bytes) = if guard_bytes == 0 || max_memory_bytes == 0 || num_slots == 0 {
+        // In the uncommon case where the memory/guard regions are empty or we don't need any slots , we
+        // will not need any stripes: we just lay out the slots back-to-back
+        // using a single stripe.
+        (1, faulting_region_bytes)
+    } else if num_pkeys_available < 2 {
+        // If we do not have enough protection keys to stripe the memory, we do
+        // the same. We can't elide any of the guard bytes because we aren't
+        // overlapping guard regions with other stripes...
+        (1, faulting_region_bytes)
+    } else {
+        // ...but if we can create at least two stripes, we can use another
+        // stripe (i.e., a different pkey) as this slot's guard region--this
+        // reduces the guard bytes each slot has to allocate. We must make
+        // sure, though, that if the size of that other stripe(s) does not
+        // fully cover `guard_bytes`, we keep those around to prevent OOB
+        // access.
+
+        // We first calculate the number of stripes we need: we want to
+        // minimize this so that there is less chance of a single store
+        // running out of slots with its stripe--we need at least two,
+        // though. But this is not just an optimization; we need to handle
+        // the case when there are fewer slots than stripes. E.g., if our
+        // pool is configured with only three slots (`num_memory_slots =
+        // 3`), we will run into failures if we attempt to set up more than
+        // three stripes.
+        let needed_num_stripes = faulting_region_bytes / max_memory_bytes
+            + usize::from(faulting_region_bytes % max_memory_bytes != 0);
+        assert!(needed_num_stripes > 0);
+        let num_stripes = num_pkeys_available.min(needed_num_stripes).min(num_slots);
+
+        // Next, we try to reduce the slot size by "overlapping" the stripes: we
+        // can make slot `n` smaller since we know that slot `n+1` and following
+        // are in different stripes and will look just like `PROT_NONE` memory.
+        // Recall that codegen expects a guarantee that at least
+        // `faulting_region_bytes` will catch OOB accesses via segfaults.
+        let needed_slot_bytes = faulting_region_bytes
+            .checked_div(num_stripes)
+            .unwrap_or(faulting_region_bytes)
+            .max(max_memory_bytes);
+        assert!(needed_slot_bytes >= max_memory_bytes);
+
+        (num_stripes, needed_slot_bytes)
+    };
+
+    // The page-aligned slot size; equivalent to `memory_and_guard_size`.
+    let page_alignment = crate::runtime::vm::host_page_size() - 1;
+    let slot_bytes = slot_bytes
+        .checked_add(page_alignment)
+        .and_then(|slot_bytes| Some(slot_bytes & !page_alignment))
+        .ok_or_else(|| anyhow!("slot size is too large"))?;
+
+    // We may need another guard region (like `pre_slab_guard_bytes`) at the end
+    // of our slab to maintain our `faulting_region_bytes` guarantee. We could
+    // be conservative and just create it as large as `faulting_region_bytes`,
+    // but because we know that the last slot's `slot_bytes` make up the first
+    // part of that region, we reduce the final guard region by that much.
+    let post_slab_guard_bytes = faulting_region_bytes.saturating_sub(slot_bytes);
+
+    // Check that we haven't exceeded the slab we can calculate given the limits
+    // of `usize`.
+    let layout = SlabLayout {
+        num_slots,
+        slot_bytes,
+        max_memory_bytes,
+        pre_slab_guard_bytes,
+        post_slab_guard_bytes,
+        num_stripes,
+    };
+    match layout.total_slab_bytes() {
+        Ok(_) => Ok(layout),
+        Err(e) => Err(e),
+    }
+}
+
+#[cfg(test)]
+mod tests {
+    use super::*;
+    use proptest::prelude::*;
+
+    const WASM_PAGE_SIZE: u32 = wasmtime_environ::Memory::DEFAULT_PAGE_SIZE;
+
+    #[cfg(target_pointer_width = "64")]
+    #[test]
+    fn test_memory_pool() -> Result<()> {
+        let pool = MemoryPool::new(
+            &PoolingInstanceAllocatorConfig {
+                limits: InstanceLimits {
+                    total_memories: 5,
+                    max_tables_per_module: 0,
+                    max_memories_per_module: 3,
+                    table_elements: 0,
+                    max_memory_size: WASM_PAGE_SIZE as usize,
+                    ..Default::default()
+                },
+                ..Default::default()
+            },
+            &Tunables {
+                static_memory_reservation: WASM_PAGE_SIZE as u64,
+                static_memory_offset_guard_size: 0,
+                ..Tunables::default_host()
+            },
+        )?;
+
+        assert_eq!(pool.layout.slot_bytes, WASM_PAGE_SIZE as usize);
+        assert_eq!(pool.layout.num_slots, 5);
+        assert_eq!(pool.layout.max_memory_bytes, WASM_PAGE_SIZE as usize);
+
+        let base = pool.mapping.as_ptr() as usize;
+
+        for i in 0..5 {
+            let index = MemoryAllocationIndex(i);
+            let ptr = pool.get_base(index);
+            assert_eq!(ptr as usize - base, i as usize * pool.layout.slot_bytes);
+        }
+
+        Ok(())
+    }
+
+    #[test]
+    #[cfg_attr(miri, ignore)]
+    fn test_pooling_allocator_striping() {
+        if !mpk::is_supported() {
+            println!("skipping `test_pooling_allocator_striping` test; mpk is not supported");
+            return;
+        }
+
+        // Force the use of MPK.
+        let config = PoolingInstanceAllocatorConfig {
+            memory_protection_keys: MpkEnabled::Enable,
+            ..PoolingInstanceAllocatorConfig::default()
+        };
+        let pool = MemoryPool::new(&config, &Tunables::default_host()).unwrap();
+        assert!(pool.stripes.len() >= 2);
+
+        let max_memory_slots = config.limits.total_memories;
+        dbg!(pool.stripes[0].allocator.num_empty_slots());
+        dbg!(pool.stripes[1].allocator.num_empty_slots());
+        let available_memory_slots: usize = pool
+            .stripes
+            .iter()
+            .map(|s| s.allocator.num_empty_slots())
+            .sum();
+        assert_eq!(
+            max_memory_slots,
+            u32::try_from(available_memory_slots).unwrap()
+        );
+    }
+
+    #[test]
+    fn check_known_layout_calculations() {
+        for num_pkeys_available in 0..16 {
+            for num_memory_slots in [0, 1, 10, 64] {
+                for expected_slot_bytes in [0, 1 << 30 /* 1GB */, 4 << 30 /* 4GB */] {
+                    for max_memory_bytes in
+                        [0, 1 * WASM_PAGE_SIZE as usize, 10 * WASM_PAGE_SIZE as usize]
+                    {
+                        for guard_bytes in [0, 2 << 30 /* 2GB */] {
+                            for guard_before_slots in [true, false] {
+                                let constraints = SlabConstraints {
+                                    max_memory_bytes,
+                                    num_slots: num_memory_slots,
+                                    expected_slot_bytes,
+                                    num_pkeys_available,
+                                    guard_bytes,
+                                    guard_before_slots,
+                                };
+                                let layout = calculate(&constraints);
+                                assert_slab_layout_invariants(constraints, layout.unwrap());
+                            }
+                        }
+                    }
+                }
+            }
+        }
+    }
+
+    proptest! {
+        #[test]
+        #[cfg_attr(miri, ignore)]
+        fn check_random_layout_calculations(c in constraints()) {
+            if let Ok(l) = calculate(&c) {
+                assert_slab_layout_invariants(c, l);
+            }
+        }
+    }
+
+    fn constraints() -> impl Strategy<Value = SlabConstraints> {
+        (
+            any::<usize>(),
+            any::<usize>(),
+            any::<usize>(),
+            any::<usize>(),
+            any::<usize>(),
+            any::<bool>(),
+        )
+            .prop_map(
+                |(
+                    max_memory_bytes,
+                    num_memory_slots,
+                    expected_slot_bytes,
+                    num_pkeys_available,
+                    guard_bytes,
+                    guard_before_slots,
+                )| {
+                    SlabConstraints {
+                        max_memory_bytes,
+                        num_slots: num_memory_slots,
+                        expected_slot_bytes,
+                        num_pkeys_available,
+                        guard_bytes,
+                        guard_before_slots,
+                    }
+                },
+            )
+    }
+
+    fn assert_slab_layout_invariants(c: SlabConstraints, s: SlabLayout) {
+        // Check that all the sizes add up.
+        assert_eq!(
+            s.total_slab_bytes().unwrap(),
+            s.pre_slab_guard_bytes + s.slot_bytes * c.num_slots + s.post_slab_guard_bytes,
+            "the slab size does not add up: {c:?} => {s:?}"
+        );
+        assert!(
+            s.slot_bytes >= s.max_memory_bytes,
+            "slot is not big enough: {c:?} => {s:?}"
+        );
+
+        // Check that the various memory values are page-aligned.
+        assert!(
+            is_aligned(s.slot_bytes),
+            "slot is not page-aligned: {c:?} => {s:?}",
+        );
+        assert!(
+            is_aligned(s.max_memory_bytes),
+            "slot guard region is not page-aligned: {c:?} => {s:?}",
+        );
+        assert!(
+            is_aligned(s.pre_slab_guard_bytes),
+            "pre-slab guard region is not page-aligned: {c:?} => {s:?}"
+        );
+        assert!(
+            is_aligned(s.post_slab_guard_bytes),
+            "post-slab guard region is not page-aligned: {c:?} => {s:?}"
+        );
+        assert!(
+            is_aligned(s.total_slab_bytes().unwrap()),
+            "slab is not page-aligned: {c:?} => {s:?}"
+        );
+
+        // Check that we use no more or less stripes than needed.
+        assert!(s.num_stripes >= 1, "not enough stripes: {c:?} => {s:?}");
+        if c.num_pkeys_available == 0 || c.num_slots == 0 {
+            assert_eq!(
+                s.num_stripes, 1,
+                "expected at least one stripe: {c:?} => {s:?}"
+            );
+        } else {
+            assert!(
+                s.num_stripes <= c.num_pkeys_available,
+                "layout has more stripes than available pkeys: {c:?} => {s:?}"
+            );
+            assert!(
+                s.num_stripes <= c.num_slots,
+                "layout has more stripes than memory slots: {c:?} => {s:?}"
+            );
+        }
+
+        // Check that we use the minimum number of stripes/protection keys.
+        // - if the next MPK-protected slot is bigger or the same as the
+        //   required guard region, we only need two stripes
+        // - if the next slot is smaller than the guard region, we only need
+        //   enough stripes to add up to at least that guard region size.
+        if c.num_pkeys_available > 1 && c.max_memory_bytes > 0 {
+            assert!(
+                s.num_stripes <= (c.guard_bytes / c.max_memory_bytes) + 2,
+                "calculated more stripes than needed: {c:?} => {s:?}"
+            );
+        }
+
+        // Check that the memory-striping will not allow OOB access.
+        // - we may have reduced the slot size from `expected_slot_bytes` to
+        //   `slot_bytes` assuming MPK striping; we check that our guaranteed
+        //   "faulting region" is respected
+        // - the last slot won't have MPK striping after it; we check that the
+        //   `post_slab_guard_bytes` accounts for this
+        assert!(
+            s.bytes_to_next_stripe_slot()
+                >= c.expected_slot_bytes.max(c.max_memory_bytes) + c.guard_bytes,
+            "faulting region not large enough: {c:?} => {s:?}"
+        );
+        assert!(
+            s.slot_bytes + s.post_slab_guard_bytes >= c.expected_slot_bytes,
+            "last slot may allow OOB access: {c:?} => {s:?}"
+        );
+    }
+
+    fn is_aligned(bytes: usize) -> bool {
+        bytes % crate::runtime::vm::host_page_size() == 0
+    }
+}