openstudio-standards 0.2.12.rc4 → 0.2.13.rc3

data/lib/openstudio-standards/prototypes/common/objects/Prototype.AirConditionerVariableRefrigerantFlow.rb

@@ -17,23 +17,23 @@ class Standard
   # @param priority_control_type [String] type of master thermostat priority control type
   #   options are LoadPriority, ZonePriority, ThermostatOffsetPriority, MasterThermostatPriority
   def create_air_conditioner_variable_refrigerant_flow(model,
-                                                       name: "VRF System",
+                                                       name: 'VRF System',
                                                        schedule: nil,
                                                        type: nil,
                                                        cooling_cop: 4.287,
                                                        heating_cop: 4.147,
                                                        heat_recovery: true,
-                                                       defrost_strategy: "Resistive",
-                                                       condenser_type: "AirCooled",
+                                                       defrost_strategy: 'Resistive',
+                                                       condenser_type: 'AirCooled',
                                                        condenser_loop: nil,
                                                        master_zone: nil,
-                                                       priority_control_type: "LoadPriority")
+                                                       priority_control_type: 'LoadPriority')
 
     vrf_outdoor_unit = OpenStudio::Model::AirConditionerVariableRefrigerantFlow.new(model)
 
     # set name
     if name.nil?
-      vrf_outdoor_unit.setName("VRF System")
+      vrf_outdoor_unit.setName('VRF System')
     else
       vrf_outdoor_unit.setName(name)
     end
@@ -45,7 +45,7 @@ class Standard
     elsif schedule.class == String
       availability_schedule = model_add_schedule(model, schedule)
 
-      if availability_schedule.nil? && schedule == "alwaysOffDiscreteSchedule"
+      if availability_schedule.nil? && schedule == 'alwaysOffDiscreteSchedule'
         availability_schedule = model.alwaysOffDiscreteSchedule
       elsif availability_schedule.nil?
         availability_schedule = model.alwaysOnDiscreteSchedule
@@ -76,21 +76,21 @@ class Standard
     vrf_outdoor_unit.setMaximumOutdoorTemperatureinCoolingMode(50.0)
     vrf_outdoor_unit.setMinimumOutdoorTemperatureinHeatingMode(-25.0)
     vrf_outdoor_unit.setMaximumOutdoorTemperatureinHeatingMode(16.1)
-    vrf_outdoor_unit.setMinimumOutdoorTemperatureinHeatRecoveryMode (-10.0)
+    vrf_outdoor_unit.setMinimumOutdoorTemperatureinHeatRecoveryMode(-10.0)
     vrf_outdoor_unit.setMaximumOutdoorTemperatureinHeatRecoveryMode(27.2)
     vrf_outdoor_unit.setEquivalentPipingLengthusedforPipingCorrectionFactorinCoolingMode(30.48)
     vrf_outdoor_unit.setEquivalentPipingLengthusedforPipingCorrectionFactorinHeatingMode(30.48)
     vrf_outdoor_unit.setVerticalHeightusedforPipingCorrectionFactor(10.668)
 
     # condenser type
-    if condenser_type == "WaterCooled"
+    if condenser_type == 'WaterCooled'
       vrf_outdoor_unit.setString(56, condenser_type)
       # require condenser_loop
       unless condenser_loop
-        OpenStudio.logFree(OpenStudio::Error, 'openstudio.Model.Model', "Must specify condenser_loop for vrf_outdoor_unit if WaterCooled")
+        OpenStudio.logFree(OpenStudio::Error, 'openstudio.Model.Model', 'Must specify condenser_loop for vrf_outdoor_unit if WaterCooled')
       end
       condenser_loop.addDemandBranchForComponent(vrf_outdoor_unit)
-    elsif condenser_type == "EvaporativelyCooled"
+    elsif condenser_type == 'EvaporativelyCooled'
       vrf_outdoor_unit.setString(56, condenser_type)
     end
 
@@ -133,7 +133,7 @@ class Standard
 
       # Cooling Capacity Ratio Modifier Function of Low Temperature Curve
       vrf_cool_cap_f_of_low_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_cool_cap_f_of_low_temp.setName("vrf_cool_cap_f_of_low_temp")
+      vrf_cool_cap_f_of_low_temp.setName('vrf_cool_cap_f_of_low_temp')
       vrf_cool_cap_f_of_low_temp.setCoefficient1Constant(-1.69653019339465)
       vrf_cool_cap_f_of_low_temp.setCoefficient2x(0.207248180531939)
       vrf_cool_cap_f_of_low_temp.setCoefficient3xPOW2(-0.00343146229659024)
@@ -149,7 +149,7 @@ class Standard
 
       # Cooling Capacity Ratio Boundary Curve
       vrf_cool_cap_ratio_boundary = OpenStudio::Model::CurveCubic.new(model)
-      vrf_cool_cap_ratio_boundary.setName("vrf_cool_cap_ratio_boundary")
+      vrf_cool_cap_ratio_boundary.setName('vrf_cool_cap_ratio_boundary')
       vrf_cool_cap_ratio_boundary.setCoefficient1Constant(25.73)
       vrf_cool_cap_ratio_boundary.setCoefficient2x(-0.03150043)
       vrf_cool_cap_ratio_boundary.setCoefficient3xPOW2(-0.01416595)
@@ -159,7 +159,7 @@ class Standard
 
       # Cooling Capacity Ratio Modifier Function of High Temperature Curve
       vrf_cool_cap_f_of_high_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_cool_cap_f_of_high_temp.setName("vrf_cool_cap_f_of_high_temp")
+      vrf_cool_cap_f_of_high_temp.setName('vrf_cool_cap_f_of_high_temp')
       vrf_cool_cap_f_of_high_temp.setCoefficient1Constant(0.6867358)
       vrf_cool_cap_f_of_high_temp.setCoefficient2x(0.0207631)
       vrf_cool_cap_f_of_high_temp.setCoefficient3xPOW2(0.0005447)
@@ -173,7 +173,7 @@ class Standard
 
       # Cooling Energy Input Ratio Modifier Function of Low Temperature Curve
       vrf_cool_eir_f_of_low_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_cool_eir_f_of_low_temp.setName("vrf_cool_eir_f_of_low_temp")
+      vrf_cool_eir_f_of_low_temp.setName('vrf_cool_eir_f_of_low_temp')
       vrf_cool_eir_f_of_low_temp.setCoefficient1Constant(-1.61908214818635)
       vrf_cool_eir_f_of_low_temp.setCoefficient2x(0.185964818731756)
       vrf_cool_eir_f_of_low_temp.setCoefficient3xPOW2(-0.00389610393381592)
@@ -189,7 +189,7 @@ class Standard
 
       # Cooling Energy Input Ratio Boundary Curve
       vrf_cool_eir_ratio_boundary = OpenStudio::Model::CurveCubic.new(model)
-      vrf_cool_eir_ratio_boundary.setName("vrf_cool_eir_ratio_boundary")
+      vrf_cool_eir_ratio_boundary.setName('vrf_cool_eir_ratio_boundary')
       vrf_cool_eir_ratio_boundary.setCoefficient1Constant(25.73473775)
       vrf_cool_eir_ratio_boundary.setCoefficient2x(-0.03150043)
       vrf_cool_eir_ratio_boundary.setCoefficient3xPOW2(-0.01416595)
@@ -199,7 +199,7 @@ class Standard
 
       # Cooling Energy Input Ratio Modifier Function of High Temperature Curve
       vrf_cool_eir_f_of_high_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_cool_eir_f_of_high_temp.setName("vrf_cool_eir_f_of_high_temp")
+      vrf_cool_eir_f_of_high_temp.setName('vrf_cool_eir_f_of_high_temp')
       vrf_cool_eir_f_of_high_temp.setCoefficient1Constant(-1.4395110176)
       vrf_cool_eir_f_of_high_temp.setCoefficient2x(0.1619850459)
       vrf_cool_eir_f_of_high_temp.setCoefficient3xPOW2(-0.0034911781)
@@ -213,7 +213,7 @@ class Standard
 
       # Cooling Energy Input Ratio Modifier Function of Low Part-Load Ratio Curve
       vrf_cooling_eir_low_plr = OpenStudio::Model::CurveCubic.new(model)
-      vrf_cooling_eir_low_plr.setName("vrf_cool_eir_f_of_low_temp")
+      vrf_cooling_eir_low_plr.setName('vrf_cool_eir_f_of_low_temp')
       vrf_cooling_eir_low_plr.setCoefficient1Constant(0.0734992169827752)
       vrf_cooling_eir_low_plr.setCoefficient2x(0.334783365234032)
       vrf_cooling_eir_low_plr.setCoefficient3xPOW2(0.591613015486343)
@@ -225,7 +225,7 @@ class Standard
 
       # Cooling Energy Input Ratio Modifier Function of High Part-Load Ratio Curve
       vrf_cooling_eir_high_plr = OpenStudio::Model::CurveCubic.new(model)
-      vrf_cooling_eir_high_plr.setName("vrf_cooling_eir_high_plr")
+      vrf_cooling_eir_high_plr.setName('vrf_cooling_eir_high_plr')
       vrf_cooling_eir_high_plr.setCoefficient1Constant(1.0)
       vrf_cooling_eir_high_plr.setCoefficient2x(0.0)
       vrf_cooling_eir_high_plr.setCoefficient3xPOW2(0.0)
@@ -235,7 +235,7 @@ class Standard
 
       # Cooling Combination Ratio Correction Factor Curve
       vrf_cooling_comb_ratio = OpenStudio::Model::CurveCubic.new(model)
-      vrf_cooling_comb_ratio.setName("vrf_cooling_comb_ratio")
+      vrf_cooling_comb_ratio.setName('vrf_cooling_comb_ratio')
       vrf_cooling_comb_ratio.setCoefficient1Constant(0.24034)
       vrf_cooling_comb_ratio.setCoefficient2x(-0.21873)
       vrf_cooling_comb_ratio.setCoefficient3xPOW2(1.97941)
@@ -247,7 +247,7 @@ class Standard
 
       # Cooling Part-Load Fraction Correlation Curve
       vrf_cooling_cplffplr = OpenStudio::Model::CurveCubic.new(model)
-      vrf_cooling_cplffplr.setName("vrf_cooling_cplffplr")
+      vrf_cooling_cplffplr.setName('vrf_cooling_cplffplr')
       vrf_cooling_cplffplr.setCoefficient1Constant(0.85)
       vrf_cooling_cplffplr.setCoefficient2x(0.15)
       vrf_cooling_cplffplr.setCoefficient3xPOW2(0.0)
@@ -257,7 +257,7 @@ class Standard
 
       # Heating Capacity Ratio Modifier Function of Low Temperature Curve Name
       vrf_heat_cap_f_of_low_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_heat_cap_f_of_low_temp.setName("vrf_heat_cap_f_of_low_temp")
+      vrf_heat_cap_f_of_low_temp.setName('vrf_heat_cap_f_of_low_temp')
       vrf_heat_cap_f_of_low_temp.setCoefficient1Constant(0.983220174655636)
       vrf_heat_cap_f_of_low_temp.setCoefficient2x(0.0157167577703294)
       vrf_heat_cap_f_of_low_temp.setCoefficient3xPOW2(-0.000835032422884084)
@@ -273,7 +273,7 @@ class Standard
 
       # Heating Capacity Ratio Boundary Curve Name
       vrf_heat_cap_ratio_boundary = OpenStudio::Model::CurveCubic.new(model)
-      vrf_heat_cap_ratio_boundary.setName("vrf_heat_cap_ratio_boundary")
+      vrf_heat_cap_ratio_boundary.setName('vrf_heat_cap_ratio_boundary')
       vrf_heat_cap_ratio_boundary.setCoefficient1Constant(58.577)
       vrf_heat_cap_ratio_boundary.setCoefficient2x(-3.0255)
       vrf_heat_cap_ratio_boundary.setCoefficient3xPOW2(0.0193)
@@ -283,7 +283,7 @@ class Standard
 
       # Heating Capacity Ratio Modifier Function of High Temperature Curve Name
       vrf_heat_cap_f_of_high_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_heat_cap_f_of_high_temp.setName("vrf_heat_cap_f_of_high_temp")
+      vrf_heat_cap_f_of_high_temp.setName('vrf_heat_cap_f_of_high_temp')
       vrf_heat_cap_f_of_high_temp.setCoefficient1Constant(2.5859872368)
       vrf_heat_cap_f_of_high_temp.setCoefficient2x(-0.0953227101)
       vrf_heat_cap_f_of_high_temp.setCoefficient3xPOW2(0.0009553288)
@@ -297,7 +297,7 @@ class Standard
 
       # Heating Energy Input Ratio Modifier Function of Low Temperature Curve Name
       vrf_heat_eir_f_of_low_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_heat_eir_f_of_low_temp.setName("vrf_heat_eir_f_of_low_temp")
+      vrf_heat_eir_f_of_low_temp.setName('vrf_heat_eir_f_of_low_temp')
       vrf_heat_eir_f_of_low_temp.setCoefficient1Constant(0.756830029796909)
       vrf_heat_eir_f_of_low_temp.setCoefficient2x(0.0457499799042671)
       vrf_heat_eir_f_of_low_temp.setCoefficient3xPOW2(-0.00136357240431388)
@@ -313,7 +313,7 @@ class Standard
 
       # Heating Energy Input Ratio Boundary Curve Name
       vrf_heat_eir_boundary = OpenStudio::Model::CurveCubic.new(model)
-      vrf_heat_eir_boundary.setName("vrf_heat_eir_boundary")
+      vrf_heat_eir_boundary.setName('vrf_heat_eir_boundary')
       vrf_heat_eir_boundary.setCoefficient1Constant(58.577)
       vrf_heat_eir_boundary.setCoefficient2x(-3.0255)
       vrf_heat_eir_boundary.setCoefficient3xPOW2(0.0193)
@@ -323,7 +323,7 @@ class Standard
 
       # Heating Energy Input Ratio Modifier Function of High Temperature Curve Name
       vrf_heat_eir_f_of_high_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_heat_eir_f_of_high_temp.setName("vrf_heat_eir_f_of_high_temp")
+      vrf_heat_eir_f_of_high_temp.setName('vrf_heat_eir_f_of_high_temp')
       vrf_heat_eir_f_of_high_temp.setCoefficient1Constant(1.3885703646)
       vrf_heat_eir_f_of_high_temp.setCoefficient2x(-0.0229771462)
       vrf_heat_eir_f_of_high_temp.setCoefficient3xPOW2(0.000537274)
@@ -336,11 +336,11 @@ class Standard
       vrf_heat_eir_f_of_high_temp.setMaximumValueofy(1.0)
 
       # Heating Performance Curve Outdoor Temperature Type
-      vrf_outdoor_unit.setHeatingPerformanceCurveOutdoorTemperatureType("WetBulbTemperature")
+      vrf_outdoor_unit.setHeatingPerformanceCurveOutdoorTemperatureType('WetBulbTemperature')
 
       # Heating Energy Input Ratio Modifier Function of Low Part-Load Ratio Curve Name
       vrf_heating_eir_low_plr = OpenStudio::Model::CurveCubic.new(model)
-      vrf_heating_eir_low_plr.setName("vrf_heating_eir_low_plr")
+      vrf_heating_eir_low_plr.setName('vrf_heating_eir_low_plr')
       vrf_heating_eir_low_plr.setCoefficient1Constant(0.0724906507105475)
       vrf_heating_eir_low_plr.setCoefficient2x(0.658189977561701)
       vrf_heating_eir_low_plr.setCoefficient3xPOW2(0.269259536275246)
@@ -352,7 +352,7 @@ class Standard
 
       # Heating Energy Input Ratio Modifier Function of High Part-Load Ratio Curve Name
       vrf_heating_eir_hi_plr = OpenStudio::Model::CurveCubic.new(model)
-      vrf_heating_eir_hi_plr.setName("vrf_heating_eir_hi_plr")
+      vrf_heating_eir_hi_plr.setName('vrf_heating_eir_hi_plr')
       vrf_heating_eir_hi_plr.setCoefficient1Constant(1.0)
       vrf_heating_eir_hi_plr.setCoefficient2x(0.0)
       vrf_heating_eir_hi_plr.setCoefficient3xPOW2(0.0)
@@ -362,7 +362,7 @@ class Standard
 
       # Heating Combination Ratio Correction Factor Curve Name
       vrf_heating_comb_ratio = OpenStudio::Model::CurveCubic.new(model)
-      vrf_heating_comb_ratio.setName("vrf_heating_comb_ratio")
+      vrf_heating_comb_ratio.setName('vrf_heating_comb_ratio')
       vrf_heating_comb_ratio.setCoefficient1Constant(0.62115)
       vrf_heating_comb_ratio.setCoefficient2x(-1.55798)
       vrf_heating_comb_ratio.setCoefficient3xPOW2(3.36817)
@@ -374,7 +374,7 @@ class Standard
 
       # Heating Part-Load Fraction Correlation Curve Name
       vrf_heating_cplffplr = OpenStudio::Model::CurveCubic.new(model)
-      vrf_heating_cplffplr.setName("vrf_heating_cplffplr")
+      vrf_heating_cplffplr.setName('vrf_heating_cplffplr')
       vrf_heating_cplffplr.setCoefficient1Constant(0.85)
       vrf_heating_cplffplr.setCoefficient2x(0.15)
       vrf_heating_cplffplr.setCoefficient3xPOW2(0.0)
@@ -384,7 +384,7 @@ class Standard
 
       # Defrost Energy Input Ratio Modifier Function of Temperature Curve
       vrf_defrost_eir_f_of_temp = OpenStudio::Model::CurveBiquadratic.new(model)
-      vrf_defrost_eir_f_of_temp.setName("vrf_defrost_eir_f_of_temp")
+      vrf_defrost_eir_f_of_temp.setName('vrf_defrost_eir_f_of_temp')
       vrf_defrost_eir_f_of_temp.setCoefficient1Constant(-1.61908214818635)
       vrf_defrost_eir_f_of_temp.setCoefficient2x(0.185964818731756)
       vrf_defrost_eir_f_of_temp.setCoefficient3xPOW2(-0.00389610393381592)
@@ -399,8 +399,8 @@ class Standard
       vrf_defrost_eir_f_of_temp.setMaximumCurveOutput(1.155)
 
       # set defrost control
-      vrf_outdoor_unit.setDefrostStrategy("ReverseCycle")
-      vrf_outdoor_unit.setDefrostControl("OnDemand")
+      vrf_outdoor_unit.setDefrostStrategy('ReverseCycle')
+      vrf_outdoor_unit.setDefrostControl('OnDemand')
 
     end
 
@@ -428,4 +428,4 @@ class Standard
 
     return vrf_outdoor_unit
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.BoilerHotWater.rb

@@ -36,7 +36,7 @@ class Standard
     boiler = OpenStudio::Model::BoilerHotWater.new(model)
     if name.nil?
       if !hot_water_loop.nil?
-        boiler.setName("#{hot_water_loop.name.to_s} Boiler")
+        boiler.setName("#{hot_water_loop.name} Boiler")
       else
         boiler.setName('Boiler')
       end
@@ -115,4 +115,4 @@ class Standard
 
     return boiler
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CentralAirSourceHeatPump.rb

@@ -66,7 +66,7 @@ class Standard
     setpt_mgr_sch_sen.setName("#{plant_comp.name}_Setpt_Mgr_Temp_Sen")
     hot_water_loop.supplyOutletNode.setpointManagers.each do |m|
       if m.to_SetpointManagerScheduled.is_initialized
-        setpt_mgr_sch_sen.setKeyName("#{m.to_SetpointManagerScheduled.get.schedule.name}")
+        setpt_mgr_sch_sen.setKeyName(m.to_SetpointManagerScheduled.get.schedule.name.to_s)
       end
     end
 
@@ -211,4 +211,4 @@ class Standard
 
     return plant_comp
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilCoolingDXSingleSpeed.rb

@@ -10,7 +10,7 @@ class Standard
   # @param cop [Double] rated cooling coefficient of performance
   def create_coil_cooling_dx_single_speed(model,
                                           air_loop_node: nil,
-                                          name: "1spd DX Clg Coil",
+                                          name: '1spd DX Clg Coil',
                                           schedule: nil,
                                           type: nil,
                                           cop: nil)
@@ -30,7 +30,7 @@ class Standard
     elsif schedule.class == String
       coil_availability_schedule = model_add_schedule(model, schedule)
 
-      if coil_availability_schedule.nil? && schedule == "alwaysOffDiscreteSchedule"
+      if coil_availability_schedule.nil? && schedule == 'alwaysOffDiscreteSchedule'
         coil_availability_schedule = model.alwaysOffDiscreteSchedule
       elsif coil_availability_schedule.nil?
         coil_availability_schedule = model.alwaysOnDiscreteSchedule
@@ -269,4 +269,4 @@ class Standard
 
     return clg_coil
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilCoolingDXTwoSpeed.rb

@@ -155,4 +155,4 @@ class Standard
 
     return clg_coil
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilCoolingWater.rb

@@ -67,10 +67,10 @@ class Standard
     # coil controller properties
     # NOTE: These inputs will get overwritten if addToNode or addDemandBranchForComponent is called on the htg_coil object after this
     clg_coil_controller = clg_coil.controllerWaterCoil.get
-    clg_coil_controller.setName("#{clg_coil.name.to_s} Controller")
+    clg_coil_controller.setName("#{clg_coil.name} Controller")
     clg_coil_controller.setAction('Reverse')
     clg_coil_controller.setMinimumActuatedFlow(0.0)
 
     return clg_coil
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilCoolingWaterToAirHeatPumpEquationFit.rb

@@ -11,7 +11,7 @@ class Standard
   def create_coil_cooling_water_to_air_heat_pump_equation_fit(model,
                                                               plant_loop,
                                                               air_loop_node: nil,
-                                                              name: "Water-to-Air HP Clg Coil",
+                                                              name: 'Water-to-Air HP Clg Coil',
                                                               type: nil,
                                                               cop: 3.4)
 
@@ -61,4 +61,4 @@ class Standard
 
     return clg_coil
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilHeatingDXSingleSpeed.rb

@@ -203,4 +203,4 @@ class Standard
     def_eir_f_of_temp.setMinimumValueofy(21.11111)
     def_eir_f_of_temp.setMaximumValueofy(46.11111)
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilHeatingElectric.rb

@@ -9,7 +9,7 @@ class Standard
   # @param efficiency [Double] rated heating efficiency
   def create_coil_heating_electric(model,
                                    air_loop_node: nil,
-                                   name: "Electric Htg Coil",
+                                   name: 'Electric Htg Coil',
                                    schedule: nil,
                                    nominal_capacity: nil,
                                    efficiency: 1.0)
@@ -49,4 +49,4 @@ class Standard
 
     return htg_coil
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilHeatingWater.rb

@@ -85,10 +85,10 @@ class Standard
     # coil controller properties
     # NOTE: These inputs will get overwritten if addToNode or addDemandBranchForComponent is called on the htg_coil object after this
     htg_coil_controller = htg_coil.controllerWaterCoil.get
-    htg_coil_controller.setName("#{htg_coil.name.to_s} Controller")
+    htg_coil_controller.setName("#{htg_coil.name} Controller")
     htg_coil_controller.setMinimumActuatedFlow(0.0)
     htg_coil_controller.setControllerConvergenceTolerance(controller_convergence_tolerance) unless controller_convergence_tolerance.nil?
 
     return htg_coil
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoilHeatingWaterToAirHeatPumpEquationFit.rb

@@ -11,7 +11,7 @@ class Standard
   def create_coil_heating_water_to_air_heat_pump_equation_fit(model,
                                                               plant_loop,
                                                               air_loop_node: nil,
-                                                              name: "Water-to-Air HP Htg Coil",
+                                                              name: 'Water-to-Air HP Htg Coil',
                                                               type: nil,
                                                               cop: 4.2)
 
@@ -55,4 +55,4 @@ class Standard
 
     return htg_coil
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.CoolingTower.rb

@@ -128,4 +128,4 @@ class Standard
 
     return [leaving_cw_t_c, approach_k, range_k]
   end
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.Fan.rb

@@ -1,4 +1,3 @@
-
 # Prototype fan calculation methods that are the same regardless of fan type.
 # These methods are available to FanConstantVolume, FanOnOff, FanVariableVolume, and FanZoneExhaust
 module PrototypeFan
@@ -10,6 +9,9 @@ module PrototypeFan
   #
   # @return [Bool] true if successful, false if not
   def prototype_fan_apply_prototype_fan_efficiency(fan)
+    # Do not modify dummy exhaust fans
+    return true unless !fan.name.to_s.downcase.include? 'dummy'
+
     # Get the max flow rate from the fan.
     maximum_flow_rate_m3_per_s = nil
     if fan.maximumFlowRate.is_initialized
@@ -176,5 +178,4 @@ module PrototypeFan
                                         end_use_subcategory: end_use_subcategory)
     end
   end
-
-end
+end

data/lib/openstudio-standards/prototypes/common/objects/Prototype.FanConstantVolume.rb

@@ -85,7 +85,7 @@ class Standard
   end
 
   def create_fan_constant_volume(model,
-                                 fan_name:nil,
+                                 fan_name: nil,
                                  fan_efficiency: nil,
                                  pressure_rise: nil,
                                  motor_efficiency: nil,
@@ -111,11 +111,11 @@ class Standard
                                            motor_in_airstream_fraction: nil,
                                            end_use_subcategory: nil)
     # check values to use
-    fan_efficiency = fan_efficiency ? fan_efficiency : fan_json['fan_efficiency']
-    pressure_rise = pressure_rise ? pressure_rise : fan_json['pressure_rise']
-    motor_efficiency = motor_efficiency ? motor_efficiency : fan_json['motor_efficiency']
-    motor_in_airstream_fraction = motor_in_airstream_fraction ? motor_in_airstream_fraction : fan_json['motor_in_airstream_fraction']
-    end_use_subcategory = end_use_subcategory ? end_use_subcategory : fan_json['end_use_subcategory']
+    fan_efficiency ||= fan_json['fan_efficiency']
+    pressure_rise ||= fan_json['pressure_rise']
+    motor_efficiency ||= fan_json['motor_efficiency']
+    motor_in_airstream_fraction ||= fan_json['motor_in_airstream_fraction']
+    end_use_subcategory ||= fan_json['end_use_subcategory']
 
     # convert values
     pressure_rise = pressure_rise ? OpenStudio.convert(pressure_rise, 'inH_{2}O', 'Pa').get : nil
@@ -130,5 +130,4 @@ class Standard
                                      end_use_subcategory: end_use_subcategory)
     return fan
   end
-
-end
+end