openstudio-standards 0.2.12.rc4 → 0.2.13.rc3

data/lib/openstudio-standards/standards/ashrae_90_1/ashrae_90_1_2016/data/ashrae_90_1_2016.water_heaters.json

@@ -0,0 +1,72 @@
+{
+  "water_heaters": [
+    {
+      "template": "90.1-2016",
+      "fuel_type": "Electricity",
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 40945.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "energy_factor_base": 0.96,
+      "energy_factor_volume_derate": 0.0003,
+      "standby_loss_base": null,
+      "standby_loss_capacity_allowance": null,
+      "standby_loss_volume_allowance": null,
+      "hourly_loss_base": null,
+      "hourly_loss_volume_allowance": null,
+      "thermal_efficiency": null,
+      "notes": "From 90.1-2016 Table F-2, Rated Storage Volume <= 55 gal"
+    },
+    {
+      "template": "90.1-2016",
+      "fuel_type": "Electricity",
+      "minimum_capacity": 40946.0,
+      "maximum_capacity": 99999999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "energy_factor_base": null,
+      "energy_factor_volume_derate": null,
+      "standby_loss_base": null,
+      "standby_loss_capacity_allowance": null,
+      "standby_loss_volume_allowance": null,
+      "hourly_loss_base": 0.3,
+      "hourly_loss_volume_allowance": 27.0,
+      "thermal_efficiency": null,
+      "notes": null
+    },
+    {
+      "template": "90.1-2016",
+      "fuel_type": "NaturalGas",
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 74999.99,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "energy_factor_base": 0.675,
+      "energy_factor_volume_derate": 0.0015,
+      "standby_loss_base": null,
+      "standby_loss_capacity_allowance": null,
+      "standby_loss_volume_allowance": null,
+      "hourly_loss_base": null,
+      "hourly_loss_volume_allowance": null,
+      "thermal_efficiency": null,
+      "notes": "From 90.1-2016 Table F-2, Rated Storage Volume <= 55 gal"
+    },
+    {
+      "template": "90.1-2016",
+      "fuel_type": "NaturalGas",
+      "minimum_capacity": 75000.0,
+      "maximum_capacity": 99999999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "energy_factor_base": null,
+      "energy_factor_volume_derate": null,
+      "standby_loss_base": null,
+      "standby_loss_capacity_allowance": 800.0,
+      "standby_loss_volume_allowance": 110.0,
+      "hourly_loss_base": null,
+      "hourly_loss_volume_allowance": null,
+      "thermal_efficiency": 0.8,
+      "notes": null
+    }
+  ]
+}

data/lib/openstudio-standards/standards/ashrae_90_1/ashrae_90_1_2016/data/ashrae_90_1_2016.water_source_heat_pumps.json

@@ -0,0 +1,31 @@
+{
+  "water_source_heat_pumps": [
+    {
+      "template": "90.1-2016",
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 16999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 12.2,
+      "notes": null
+    },
+    {
+      "template": "90.1-2016",
+      "minimum_capacity": 17000.0,
+      "maximum_capacity": 64999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 13.0,
+      "notes": null
+    },
+    {
+      "template": "90.1-2016",
+      "minimum_capacity": 65000.0,
+      "maximum_capacity": 134999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_full_load_efficiency": 13.0,
+      "notes": null
+    }
+  ]
+}

data/lib/openstudio-standards/standards/ashrae_90_1/ashrae_90_1_2016/data/ashrae_90_1_2016.water_source_heat_pumps_heating.json

@@ -0,0 +1,13 @@
+{
+  "water_source_heat_pumps_heating": [
+    {
+      "template": "90.1-2016",
+      "minimum_capacity": 0.0,
+      "maximum_capacity": 9999999.0,
+      "start_date": "1919-09-09T00:00:00+00:00",
+      "end_date": "2999-09-09T00:00:00+00:00",
+      "minimum_coefficient_of_performance_heating": 4.3,
+      "notes": "From 90.1-2016 Table 6.8.1-2"
+    }
+  ]
+}

data/lib/openstudio-standards/standards/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.AirLoopHVAC.rb

@@ -0,0 +1,456 @@
+class ASHRAE9012019 < ASHRAE901
+  # @!group AirLoopHVAC
+
+  # Apply multizone vav outdoor air method and
+  # adjust multizone VAV damper positions
+  # to achieve a system minimum ventilation effectiveness
+  # of 0.6 per PNNL.  Hard-size the resulting min OA
+  # into the sizing:system object.
+  #
+  # return [Bool] returns true if successful, false if not
+  # @todo move building-type-specific code to Prototype classes
+  def air_loop_hvac_apply_multizone_vav_outdoor_air_sizing(air_loop_hvac)
+    # First time adjustment:
+    # Only applies to multi-zone vav systems
+    # exclusion: for Outpatient: (1) both AHU1 and AHU2 in 'DOE Ref Pre-1980' and 'DOE Ref 1980-2004'
+    # (2) AHU1 in 2004-2019
+    # TODO refactor: move building-type-specific code to Prototype classes
+    if air_loop_hvac_multizone_vav_system?(air_loop_hvac) && !(air_loop_hvac.name.to_s.include? 'Outpatient F1')
+      air_loop_hvac_adjust_minimum_vav_damper_positions(air_loop_hvac)
+    end
+
+    return true
+  end
+
+  # Determine the limits for the type of economizer present on the AirLoopHVAC, if any.
+  # @return [Array<Double>] [drybulb_limit_f, enthalpy_limit_btu_per_lb, dewpoint_limit_f]
+  def air_loop_hvac_economizer_limits(air_loop_hvac, climate_zone)
+    drybulb_limit_f = nil
+    enthalpy_limit_btu_per_lb = nil
+    dewpoint_limit_f = nil
+
+    # Get the OA system and OA controller
+    oa_sys = air_loop_hvac.airLoopHVACOutdoorAirSystem
+    if oa_sys.is_initialized
+      oa_sys = oa_sys.get
+    else
+      return [nil, nil, nil] # No OA system
+    end
+    oa_control = oa_sys.getControllerOutdoorAir
+    economizer_type = oa_control.getEconomizerControlType
+    oa_control.resetEconomizerMinimumLimitDryBulbTemperature
+
+    case economizer_type
+    when 'NoEconomizer'
+      OpenStudio.logFree(OpenStudio::Debug, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name} no economizer")
+      return [nil, nil, nil]
+    when 'FixedDryBulb'
+      search_criteria = {
+        'template' => template,
+        'climate_zone' => climate_zone
+      }
+      econ_limits = model_find_object(standards_data['economizers'], search_criteria)
+      drybulb_limit_f = econ_limits['fixed_dry_bulb_high_limit_shutoff_temp']
+    when 'FixedEnthalpy'
+      enthalpy_limit_btu_per_lb = 28.0
+    when 'FixedDewPointAndDryBulb'
+      drybulb_limit_f = 75.0
+      dewpoint_limit_f = 55.0
+    when 'DifferentialDryBulb', 'DifferentialEnthalpy'
+      OpenStudio.logFree(OpenStudio::Debug, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: Economizer type = #{economizer_type}, no limits defined.")
+    end
+
+    OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: Economizer type = #{economizer_type}, limits [#{drybulb_limit_f},#{enthalpy_limit_btu_per_lb},#{dewpoint_limit_f}]")
+
+    return [drybulb_limit_f, enthalpy_limit_btu_per_lb, dewpoint_limit_f]
+  end
+
+  # Determine if the system economizer must be integrated or not.
+  # All economizers must be integrated in 90.1-2019
+  def air_loop_hvac_integrated_economizer_required?(air_loop_hvac, climate_zone)
+    integrated_economizer_required = true
+    return integrated_economizer_required
+  end
+
+  # Check the economizer type currently specified in the ControllerOutdoorAir object on this air loop
+  # is acceptable per the standard.
+  #
+  # @param (see #economizer_required?)
+  # @return [Bool] Returns true if allowable, if the system has no economizer or no OA system.
+  # Returns false if the economizer type is not allowable.
+  def air_loop_hvac_economizer_type_allowable?(air_loop_hvac, climate_zone)
+    # EnergyPlus economizer types
+    # 'NoEconomizer'
+    # 'FixedDryBulb'
+    # 'FixedEnthalpy'
+    # 'DifferentialDryBulb'
+    # 'DifferentialEnthalpy'
+    # 'FixedDewPointAndDryBulb'
+    # 'ElectronicEnthalpy'
+    # 'DifferentialDryBulbAndEnthalpy'
+
+    # Get the OA system and OA controller
+    oa_sys = air_loop_hvac.airLoopHVACOutdoorAirSystem
+    if oa_sys.is_initialized
+      oa_sys = oa_sys.get
+    else
+      return true # No OA system
+    end
+    oa_control = oa_sys.getControllerOutdoorAir
+    economizer_type = oa_control.getEconomizerControlType
+
+    # Return true if no economizer is present
+    if economizer_type == 'NoEconomizer'
+      return true
+    end
+
+    # Determine the prohibited types
+    prohibited_types = []
+    case climate_zone
+    when 'ASHRAE 169-2006-0B',
+         'ASHRAE 169-2006-1B',
+         'ASHRAE 169-2006-2B',
+         'ASHRAE 169-2006-3B',
+         'ASHRAE 169-2006-3C',
+         'ASHRAE 169-2006-4B',
+         'ASHRAE 169-2006-4C',
+         'ASHRAE 169-2006-5B',
+         'ASHRAE 169-2006-6B',
+         'ASHRAE 169-2006-7A',
+         'ASHRAE 169-2006-7B',
+         'ASHRAE 169-2006-8A',
+         'ASHRAE 169-2006-8B',
+         'ASHRAE 169-2013-0B',
+         'ASHRAE 169-2013-1B',
+         'ASHRAE 169-2013-2B',
+         'ASHRAE 169-2013-3B',
+         'ASHRAE 169-2013-3C',
+         'ASHRAE 169-2013-4B',
+         'ASHRAE 169-2013-4C',
+         'ASHRAE 169-2013-5B',
+         'ASHRAE 169-2013-6B',
+         'ASHRAE 169-2013-7A',
+         'ASHRAE 169-2013-7B',
+         'ASHRAE 169-2013-8A',
+         'ASHRAE 169-2013-8B'
+      prohibited_types = ['FixedEnthalpy']
+    when 'ASHRAE 169-2006-0A',
+         'ASHRAE 169-2006-1A',
+         'ASHRAE 169-2006-2A',
+         'ASHRAE 169-2006-3A',
+         'ASHRAE 169-2006-4A',
+         'ASHRAE 169-2013-0A',
+         'ASHRAE 169-2013-1A',
+         'ASHRAE 169-2013-2A',
+         'ASHRAE 169-2013-3A',
+         'ASHRAE 169-2013-4A'
+      prohibited_types = ['FixedDryBulb', 'DifferentialDryBulb']
+    when 'ASHRAE 169-2006-5A',
+         'ASHRAE 169-2006-6A',
+         'ASHRAE 169-2013-5A',
+         'ASHRAE 169-2013-6A'
+      prohibited_types = []
+    end
+
+    # Check if the specified type is allowed
+    economizer_type_allowed = true
+    if prohibited_types.include?(economizer_type)
+      economizer_type_allowed = false
+    end
+
+    return economizer_type_allowed
+  end
+
+  # Determine if multizone vav optimization is required.
+  #
+  # @code_sections [90.1-2019_6.5.3.3]
+  # @param (see #economizer_required?)
+  # @return [Bool] Returns true if required, false if not.
+  # @todo Add exception logic for
+  #   systems with AIA healthcare ventilation requirements
+  #   dual duct systems
+  def air_loop_hvac_multizone_vav_optimization_required?(air_loop_hvac, climate_zone)
+    multizone_opt_required = false
+
+    # Not required for systems with fan-powered terminals
+    num_fan_powered_terminals = 0
+    air_loop_hvac.demandComponents.each do |comp|
+      if comp.to_AirTerminalSingleDuctParallelPIUReheat.is_initialized || comp.to_AirTerminalSingleDuctSeriesPIUReheat.is_initialized
+        num_fan_powered_terminals += 1
+      end
+    end
+    if num_fan_powered_terminals > 0
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}, multizone vav optimization is not required because the system has #{num_fan_powered_terminals} fan-powered terminals.")
+      return multizone_opt_required
+    end
+
+    # Get the OA intake
+    controller_oa = nil
+    controller_mv = nil
+    oa_system = nil
+    if air_loop_hvac.airLoopHVACOutdoorAirSystem.is_initialized
+      oa_system = air_loop_hvac.airLoopHVACOutdoorAirSystem.get
+      controller_oa = oa_system.getControllerOutdoorAir
+      controller_mv = controller_oa.controllerMechanicalVentilation
+    else
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}, multizone optimization is not applicable because system has no OA intake.")
+      return multizone_opt_required
+    end
+
+    # Get the AHU design supply air flow rate
+    dsn_flow_m3_per_s = nil
+    if air_loop_hvac.designSupplyAirFlowRate.is_initialized
+      dsn_flow_m3_per_s = air_loop_hvac.designSupplyAirFlowRate.get
+    elsif air_loop_hvac.autosizedDesignSupplyAirFlowRate.is_initialized
+      dsn_flow_m3_per_s = air_loop_hvac.autosizedDesignSupplyAirFlowRate.get
+    else
+      OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name} design supply air flow rate is not available, cannot apply efficiency standard.")
+      return multizone_opt_required
+    end
+    dsn_flow_cfm = OpenStudio.convert(dsn_flow_m3_per_s, 'm^3/s', 'cfm').get
+
+    # Get the minimum OA flow rate
+    min_oa_flow_m3_per_s = nil
+    if controller_oa.minimumOutdoorAirFlowRate.is_initialized
+      min_oa_flow_m3_per_s = controller_oa.minimumOutdoorAirFlowRate.get
+    elsif controller_oa.autosizedMinimumOutdoorAirFlowRate.is_initialized
+      min_oa_flow_m3_per_s = controller_oa.autosizedMinimumOutdoorAirFlowRate.get
+    else
+      OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.AirLoopHVAC', "For #{controller_oa.name}: minimum OA flow rate is not available, cannot apply efficiency standard.")
+      return multizone_opt_required
+    end
+    min_oa_flow_cfm = OpenStudio.convert(min_oa_flow_m3_per_s, 'm^3/s', 'cfm').get
+
+    # Calculate the percent OA at design airflow
+    pct_oa = min_oa_flow_m3_per_s / dsn_flow_m3_per_s
+
+    # Not required for systems where
+    # exhaust is more than 70% of the total OA intake.
+    if pct_oa > 0.7
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{controller_oa.name}: multizone optimization is not applicable because system is more than 70% OA.")
+      return multizone_opt_required
+    end
+
+    # TODO: Not required for dual-duct systems
+    # if self.isDualDuct
+    # OpenStudio::logFree(OpenStudio::Info, "openstudio.standards.AirLoopHVAC", "For #{controller_oa.name}: multizone optimization is not applicable because it is a dual duct system")
+    # return multizone_opt_required
+    # end
+
+    # If here, multizone vav optimization is required
+    multizone_opt_required = true
+
+    return multizone_opt_required
+  end
+
+  # Determines the OA flow rates above which an economizer is required.
+  # Two separate rates, one for systems with an economizer and another
+  # for systems without.
+  # are zero for both types.
+  # @return [Array<Double>] [min_oa_without_economizer_cfm, min_oa_with_economizer_cfm]
+  def air_loop_hvac_demand_control_ventilation_limits(air_loop_hvac)
+    min_oa_without_economizer_cfm = 3000
+    min_oa_with_economizer_cfm = 750
+    return [min_oa_without_economizer_cfm, min_oa_with_economizer_cfm]
+  end
+
+  # Determine the air flow and number of story limits for whether motorized OA damper is required.
+  # @return [Array<Double>] [minimum_oa_flow_cfm, maximum_stories]
+  def air_loop_hvac_motorized_oa_damper_limits(air_loop_hvac, climate_zone)
+    case climate_zone
+    when 'ASHRAE 169-2006-0A',
+         'ASHRAE 169-2006-1A',
+         'ASHRAE 169-2006-0B',
+         'ASHRAE 169-2006-1B',
+         'ASHRAE 169-2006-2A',
+         'ASHRAE 169-2006-2B',
+         'ASHRAE 169-2006-3A',
+         'ASHRAE 169-2006-3B',
+         'ASHRAE 169-2006-3C',
+         'ASHRAE 169-2013-0A',
+         'ASHRAE 169-2013-1A',
+         'ASHRAE 169-2013-0B',
+         'ASHRAE 169-2013-1B',
+         'ASHRAE 169-2013-2A',
+         'ASHRAE 169-2013-2B',
+         'ASHRAE 169-2013-3A',
+         'ASHRAE 169-2013-3B',
+         'ASHRAE 169-2013-3C'
+      minimum_oa_flow_cfm = 0
+      maximum_stories = 999 # Any number of stories
+    else
+      minimum_oa_flow_cfm = 0
+      maximum_stories = 0
+    end
+
+    return [minimum_oa_flow_cfm, maximum_stories]
+  end
+
+  # Determine the number of stages that should be used as controls for single zone DX systems.
+  # 90.1-2019 depends on the cooling capacity of the system.
+  #
+  # @return [Integer] the number of stages: 0, 1, 2
+  def air_loop_hvac_single_zone_controls_num_stages(air_loop_hvac, climate_zone)
+    min_clg_cap_btu_per_hr = 65_000
+    clg_cap_btu_per_hr = OpenStudio.convert(air_loop_hvac_total_cooling_capacity(air_loop_hvac), 'W', 'Btu/hr').get
+    if clg_cap_btu_per_hr >= min_clg_cap_btu_per_hr
+      num_stages = 2
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: two-stage control is required since cooling capacity of #{clg_cap_btu_per_hr.round} Btu/hr exceeds the minimum of #{min_clg_cap_btu_per_hr.round} Btu/hr .")
+    else
+      num_stages = 1
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: two-stage control is not required since cooling capacity of #{clg_cap_btu_per_hr.round} Btu/hr is less than the minimum of #{min_clg_cap_btu_per_hr.round} Btu/hr .")
+    end
+
+    return num_stages
+  end
+
+  # Determine if the system required supply air temperature (SAT) reset.
+  # For 90.1-2019, SAT reset requirements are based on climate zone.
+  #
+  # @param (see #economizer_required?)
+  # @return [Bool] Returns true if required, false if not.
+  def air_loop_hvac_supply_air_temperature_reset_required?(air_loop_hvac, climate_zone)
+    is_sat_reset_required = false
+
+    # Only required for multizone VAV systems
+    unless air_loop_hvac_multizone_vav_system?(air_loop_hvac)
+      return is_sat_reset_required
+    end
+
+    case climate_zone
+    when 'ASHRAE 169-2006-0A',
+         'ASHRAE 169-2006-1A',
+         'ASHRAE 169-2006-2A',
+         'ASHRAE 169-2006-3A',
+         'ASHRAE 169-2013-0A',
+         'ASHRAE 169-2013-1A',
+         'ASHRAE 169-2013-2A',
+         'ASHRAE 169-2013-3A'
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: Supply air temperature reset is not required per 6.5.3.4 Exception 1, the system is located in climate zone #{climate_zone}.")
+      return is_sat_reset_required
+    when 'ASHRAE 169-2006-0B',
+         'ASHRAE 169-2006-1B',
+         'ASHRAE 169-2006-2B',
+         'ASHRAE 169-2006-3B',
+         'ASHRAE 169-2006-3C',
+         'ASHRAE 169-2006-4A',
+         'ASHRAE 169-2006-4B',
+         'ASHRAE 169-2006-4C',
+         'ASHRAE 169-2006-5A',
+         'ASHRAE 169-2006-5B',
+         'ASHRAE 169-2006-5C',
+         'ASHRAE 169-2006-6A',
+         'ASHRAE 169-2006-6B',
+         'ASHRAE 169-2006-7A',
+         'ASHRAE 169-2006-7B',
+         'ASHRAE 169-2006-8A',
+         'ASHRAE 169-2006-8B',
+         'ASHRAE 169-2013-0B',
+         'ASHRAE 169-2013-1B',
+         'ASHRAE 169-2013-2B',
+         'ASHRAE 169-2013-3B',
+         'ASHRAE 169-2013-3C',
+         'ASHRAE 169-2013-4A',
+         'ASHRAE 169-2013-4B',
+         'ASHRAE 169-2013-4C',
+         'ASHRAE 169-2013-5A',
+         'ASHRAE 169-2013-5B',
+         'ASHRAE 169-2013-5C',
+         'ASHRAE 169-2013-6A',
+         'ASHRAE 169-2013-6B',
+         'ASHRAE 169-2013-7A',
+         'ASHRAE 169-2013-7B',
+         'ASHRAE 169-2013-8A',
+         'ASHRAE 169-2013-8B'
+      is_sat_reset_required = true
+      OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.AirLoopHVAC', "For #{air_loop_hvac.name}: Supply air temperature reset is required.")
+      return is_sat_reset_required
+    end
+  end
+
+  # Determine the airflow limits that govern whether or not an ERV is required.
+  # Based on climate zone and % OA, plus the number of operating hours the system has.
+  # @return [Double] the flow rate above which an ERV is required.
+  # if nil, ERV is never required.
+  def air_loop_hvac_energy_recovery_ventilator_flow_limit(air_loop_hvac, climate_zone, pct_oa)
+    # Calculate the number of system operating hours
+    # based on the availability schedule.
+    ann_op_hrs = 0.0
+    avail_sch = air_loop_hvac.availabilitySchedule
+    if avail_sch == air_loop_hvac.model.alwaysOnDiscreteSchedule
+      ann_op_hrs = 8760.0
+    elsif avail_sch.to_ScheduleRuleset.is_initialized
+      avail_sch = avail_sch.to_ScheduleRuleset.get
+      ann_op_hrs = schedule_ruleset_annual_hours_above_value(avail_sch, 0.0)
+    else
+      OpenStudio.logFree(OpenStudio::Warn, 'openstudio.ashrae_90_1_2019.AirLoopHVAC', "For #{air_loop_hvac.name}: could not determine annual operating hours. Assuming less than 8,000 for ERV determination.")
+    end
+
+    if ann_op_hrs < 8000.0
+      # Table 6.5.6.1-1, less than 8000 hrs
+      search_criteria = {
+        'template' => template,
+        'climate_zone' => climate_zone,
+        'under_8000_hours' => true
+      }
+      energy_recovery_limits = model_find_object(standards_data['energy_recovery'], search_criteria)
+      if energy_recovery_limits.nil?
+        OpenStudio.logFree(OpenStudio::Warn, 'openstudio.ashrae_90_1_2019.AirLoopHVAC', "Cannot find energy recovery limits for template '#{template}', climate zone '#{climate_zone}', and under 8000 hours, assuming no energy recovery required.")
+        return nil
+      end
+
+      if pct_oa < 0.1
+        erv_cfm = nil
+      elsif pct_oa >= 0.1 && pct_oa < 0.2
+        erv_cfm = energy_recovery_limits['10_to_20_percent_oa']
+      elsif pct_oa >= 0.2 && pct_oa < 0.3
+        erv_cfm = energy_recovery_limits['20_to_30_percent_oa']
+      elsif pct_oa >= 0.3 && pct_oa < 0.4
+        erv_cfm = energy_recovery_limits['30_to_40_percent_oa']
+      elsif pct_oa >= 0.4 && pct_oa < 0.5
+        erv_cfm = energy_recovery_limits['40_to_50_percent_oa']
+      elsif pct_oa >= 0.5 && pct_oa < 0.6
+        erv_cfm = energy_recovery_limits['50_to_60_percent_oa']
+      elsif pct_oa >= 0.6 && pct_oa < 0.7
+        erv_cfm = energy_recovery_limits['60_to_70_percent_oa']
+      elsif pct_oa >= 0.7 && pct_oa < 0.8
+        erv_cfm = energy_recovery_limits['70_to_80_percent_oa']
+      elsif pct_oa >= 0.8
+        erv_cfm = energy_recovery_limits['greater_than_80_percent_oa']
+      end
+    else
+      # Table 6.5.6.1-2, above 8000 hrs
+      search_criteria = {
+        'template' => template,
+        'climate_zone' => climate_zone,
+        'under_8000_hours' => false
+      }
+      energy_recovery_limits = model_find_object(standards_data['energy_recovery'], search_criteria)
+      if energy_recovery_limits.nil?
+        OpenStudio.logFree(OpenStudio::Warn, 'openstudio.ashrae_90_1_2019.AirLoopHVAC', "Cannot find energy recovery limits for template '#{template}', climate zone '#{climate_zone}', and under 8000 hours, assuming no energy recovery required.")
+        return nil
+      end
+      if pct_oa < 0.1
+        erv_cfm = nil
+      elsif pct_oa >= 0.1 && pct_oa < 0.2
+        erv_cfm = energy_recovery_limits['10_to_20_percent_oa']
+      elsif pct_oa >= 0.2 && pct_oa < 0.3
+        erv_cfm = energy_recovery_limits['20_to_30_percent_oa']
+      elsif pct_oa >= 0.3 && pct_oa < 0.4
+        erv_cfm = energy_recovery_limits['30_to_40_percent_oa']
+      elsif pct_oa >= 0.4 && pct_oa < 0.5
+        erv_cfm = energy_recovery_limits['40_to_50_percent_oa']
+      elsif pct_oa >= 0.5 && pct_oa < 0.6
+        erv_cfm = energy_recovery_limits['50_to_60_percent_oa']
+      elsif pct_oa >= 0.6 && pct_oa < 0.7
+        erv_cfm = energy_recovery_limits['60_to_70_percent_oa']
+      elsif pct_oa >= 0.7 && pct_oa < 0.8
+        erv_cfm = energy_recovery_limits['70_to_80_percent_oa']
+      elsif pct_oa >= 0.8
+        erv_cfm = energy_recovery_limits['greater_than_80_percent_oa']
+      end
+    end
+
+    return erv_cfm
+  end
+end