openstudio-standards 0.2.12.rc4 → 0.2.13.rc3

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.HighRiseApartment.rb

@@ -1,30 +1,42 @@
-
 # Custom changes for the HighriseApartment prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
 module HighriseApartment
   def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
+    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific HVAC adjustments')
+
     # add elevator and lights&fans for the ground floor corridor
     add_extra_equip_corridor(model)
     # add extra infiltration for ground floor corridor
     add_door_infiltration(climate_zone, model)
 
     # add transformer
-    transformer_efficiency = nil
+    # efficiency based on a 75 kVA transformer
     case template
     when '90.1-2004', '90.1-2007'
       transformer_efficiency = 0.966
     when '90.1-2010', '90.1-2013'
       transformer_efficiency = 0.98
+    when '90.1-2016', '90.1-2019'
+      transformer_efficiency = 0.986
+    else
+      transformer_efficiency = nil
     end
     return true unless !transformer_efficiency.nil?
 
+    # Change to output variable name in E+ 9.4 (OS 3.1.0)
+    excluded_interiorequip_variable = if model.version < OpenStudio::VersionString.new('3.1.0')
+                                        'Electric Equipment Electric Energy'
+                                      else
+                                        'Electric Equipment Electricity Energy'
+                                      end
+
     model_add_transformer(model,
                           wired_lighting_frac: 0.0015,
                           transformer_size: 75000,
                           transformer_efficiency: transformer_efficiency,
                           excluded_interiorequip_key: 'T Corridor_Elevators_Equip',
-                          excluded_interiorequip_meter: 'Electric Equipment Electric Energy')
+                          excluded_interiorequip_meter: excluded_interiorequip_variable)
 
     return true
   end
@@ -46,7 +58,7 @@ module HighriseApartment
     elec_equip_def2.setFractionLost(0.95)
     elec_equip_def1.setDesignLevel(20_370)
     case template
-      when '90.1-2013'
+      when '90.1-2013', '90.1-2016', '90.1-2019'
         elec_equip_def2.setDesignLevel(63)
       when '90.1-2010'
         elec_equip_def2.setDesignLevel(105.9)
@@ -64,7 +76,7 @@ module HighriseApartment
     case template
       when '90.1-2004', '90.1-2007'
         elec_equip2.setSchedule(model_add_schedule(model, 'ApartmentMidRise ELEV_LIGHT_FAN_SCH_24_7'))
-      when '90.1-2010', '90.1-2013'
+      when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         elec_equip2.setSchedule(model_add_schedule(model, 'ApartmentMidRise ELEV_LIGHT_FAN_SCH_ADD_DF'))
     end
   end
@@ -79,11 +91,13 @@ module HighriseApartment
       when '90.1-2004'
         infiltration_g_corridor_door.setDesignFlowRate(1.523916863)
         infiltration_g_corridor_door.setSchedule(model_add_schedule(model, 'ApartmentHighRise INFIL_Door_Opening_SCH_0.144'))
-      when '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         case climate_zone
-          when 'ASHRAE 169-2006-1A',
+          when 'ASHRAE 169-2006-0A',
+               'ASHRAE 169-2006-1A',
                'ASHRAE 169-2006-2A',
                'ASHRAE 169-2006-2B',
+               'ASHRAE 169-2013-0A',
                'ASHRAE 169-2013-1A',
                'ASHRAE 169-2013-2A',
                'ASHRAE 169-2013-2B'
@@ -104,11 +118,12 @@ module HighriseApartment
   end
 
   def model_custom_swh_tweaks(model, building_type, climate_zone, prototype_input)
-
     return true
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
 
     return true
   end

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.Hospital.rb

@@ -1,17 +1,19 @@
-
 # Custom changes for the Hospital prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
 module Hospital
   def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started Adding HVAC')
+    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific HVAC adjustments')
 
     # add transformer
+    # efficiency based on a 500 kVA transformer
     case template
     when '90.1-2004', '90.1-2007'
       transformer_efficiency = 0.979
     when '90.1-2010', '90.1-2013'
       transformer_efficiency = 0.987
+    when '90.1-2016', '90.1-2019'
+      transformer_efficiency = 0.991
     else
       transformer_efficiency = nil
     end
@@ -37,7 +39,7 @@ module Hospital
     end
     if hot_water_loop
       case template
-        when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+        when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
           space_names = ['ER_Exam3_Mult4_Flr_1', 'OR2_Mult5_Flr_2', 'ICU_Flr_2', 'PatRoom5_Mult10_Flr_4', 'Lab_Flr_3']
           space_names.each do |space_name|
             add_humidifier(space_name, hot_water_loop, model)
@@ -132,14 +134,14 @@ module Hospital
     elec_equip_def1.setName('Kitchen Electric Equipment Definition1')
     elec_equip_def2.setName('Kitchen Electric Equipment Definition2')
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         elec_equip_def1.setFractionLatent(0)
         elec_equip_def1.setFractionRadiant(0.25)
         elec_equip_def1.setFractionLost(0)
         elec_equip_def2.setFractionLatent(0)
         elec_equip_def2.setFractionRadiant(0.25)
         elec_equip_def2.setFractionLost(0)
-        if template == '90.1-2013'
+        if template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019'
           elec_equip_def1.setDesignLevel(915)
           elec_equip_def2.setDesignLevel(855)
         else
@@ -162,11 +164,11 @@ module Hospital
     model.getWaterHeaterMixeds.sort.each do |water_heater|
       if water_heater.name.to_s.include?('300gal')
         water_heater.resetAmbientTemperatureSchedule
-        water_heater.setAmbientTemperatureIndicator('ThermalZone')		
+        water_heater.setAmbientTemperatureIndicator('ThermalZone')
         water_heater.setAmbientTemperatureThermalZone(model.getThermalZoneByName('Basement ZN').get)
       elsif water_heater.name.to_s.include?('6.0gal')
         water_heater.resetAmbientTemperatureSchedule
-        water_heater.setAmbientTemperatureIndicator('ThermalZone')		
+        water_heater.setAmbientTemperatureIndicator('ThermalZone')
         water_heater.setAmbientTemperatureThermalZone(model.getThermalZoneByName('Kitchen_Flr_5 ZN').get)
       end
     end
@@ -179,14 +181,13 @@ module Hospital
   end
 
   # add swh
-
   def reset_kitchen_oa(model)
     space_kitchen = model.getSpaceByName('Kitchen_Flr_5').get
     ventilation = space_kitchen.designSpecificationOutdoorAir.get
     ventilation.setOutdoorAirFlowperPerson(0)
     ventilation.setOutdoorAirFlowperFloorArea(0)
     case template
-      when '90.1-2010', '90.1-2013'
+      when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         ventilation.setOutdoorAirFlowRate(3.398)
       when '90.1-2004', '90.1-2007', 'DOE Ref Pre-1980', 'DOE Ref 1980-2004'
         ventilation.setOutdoorAirFlowRate(3.776)
@@ -195,7 +196,7 @@ module Hospital
 
   def model_update_exhaust_fan_efficiency(model)
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         model.getFanZoneExhausts.sort.each do |exhaust_fan|
           exhaust_fan.setFanEfficiency(0.16)
           exhaust_fan.setPressureRise(125)
@@ -234,7 +235,7 @@ module Hospital
         humidifier.addToNode(heating_coil_outlet_node)
         humidity_spm = OpenStudio::Model::SetpointManagerSingleZoneHumidityMinimum.new(model)
         case template
-        when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+        when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
           create_coil_heating_electric(model,
                                        air_loop_node: supply_outlet_node,
                                        name: "#{space_name} Electric Htg Coil")
@@ -284,7 +285,7 @@ module Hospital
           # https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf
           when '90.1-2004', '90.1-2007'
             air_terminal.setConstantMinimumAirFlowFraction(1.0) unless airlp.name.to_s.include?('VAV_1') || airlp.name.to_s.include?('VAV_2')
-          when '90.1-2010', '90.1-2013'
+          when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
             air_terminal.setConstantMinimumAirFlowFraction(1.0) unless airlp.name.to_s.include?('VAV_1') || airlp.name.to_s.include?('VAV_2')
             air_terminal.setConstantMinimumAirFlowFraction(0.5) if vav_name.include? 'PatRoom'
           end
@@ -295,11 +296,11 @@ module Hospital
 
   def model_reset_or_room_vav_minimum_damper(prototype_input, model)
     case template
-    when '90.1-2010', '90.1-2013'
+    when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
       model.getAirTerminalSingleDuctVAVReheats.sort.each do |air_terminal|
         air_terminal_name = air_terminal.name.get
         if air_terminal_name.include?('OR1') || air_terminal_name.include?('OR2') || air_terminal_name.include?('OR3') || air_terminal_name.include?('OR4')
-          air_terminal.setZoneMinimumAirFlowMethod('Scheduled')
+          air_terminal.setZoneMinimumAirFlowInputMethod('Scheduled')
           air_terminal.setMinimumAirFlowFractionSchedule(model_add_schedule(model, 'Hospital OR_MinSA_Sched'))
         end
       end
@@ -320,16 +321,26 @@ module Hospital
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
 
     return true
   end
 
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = template == '90.1-2010' || template == '90.1-2013' ? 0.2 : 0.3
+    min_damper_position = template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019' ? 0.2 : 0.3
 
     # Set the minimum flow fraction
     air_terminal_single_duct_vav_reheat.setConstantMinimumAirFlowFraction(min_damper_position)
 
     return true
   end
+
+  # Type of SAT reset for this building type
+  #
+  # @param air_loop_hvac [OpenStudio::model::AirLoopHVAC] Airloop
+  # @return [String] Returns type of SAT reset
+  def air_loop_hvac_supply_air_temperature_reset_type(air_loop_hvac)
+    return 'oa'
+  end
 end

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.Laboratory.rb

@@ -1,10 +1,8 @@
-
 # Custom changes for the Laboratory prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
 module Laboratory
   def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
-
     OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific adjustments')
 
     reset_fume_hood_oa(model)
@@ -12,14 +10,12 @@ module Laboratory
     set_oa_control_for_lab_terminals(model)
 
     # TODO
-=begin
-    # Add exhaust fan to fume hood zone
-    search_criteria = ...
-    fume_hood_space = model_find_object(standards_data['Space Types'], search_criteria)
-    fume_hood_zone_volume = fume_hood_space.getVolume...
-    flow_rate_fume_hood = fume_hood_zone_volume * fume_hood_space['Ventilation_Air_Changes...']
-    model_add_exhaust_fan(model, thermal_zones, flow_rate=flow_rate_fume_hood,  flow_fraction_schedule_name='Lab_FumeHood_Sch')
-=end
+    # # Add exhaust fan to fume hood zone
+    # search_criteria = ...
+    # fume_hood_space = model_find_object(standards_data['Space Types'], search_criteria)
+    # fume_hood_zone_volume = fume_hood_space.getVolume...
+    # flow_rate_fume_hood = fume_hood_zone_volume * fume_hood_space['Ventilation_Air_Changes...']
+    # model_add_exhaust_fan(model, thermal_zones, flow_rate=flow_rate_fume_hood,  flow_fraction_schedule_name='Lab_FumeHood_Sch')
 
     OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Finished building type specific adjustments')
 
@@ -30,9 +26,10 @@ module Laboratory
   # So add "Proportional Control Minimum Outdoor Air Flow Rate Schedule"
   # at the mean time, modify "Outdoor Air Method" to "ProportionalControlBasedOnDesignOARate" in Controller:MechanicalVentilation of the DOAS
   def reset_fume_hood_oa(model)
-    fume_hood_spaces = Array.new
+    fume_hood_spaces = []
     model.getSpaces.each do |space|
       next unless space.name.get.to_s.include? 'fumehood'
+
       ventilation = space.designSpecificationOutdoorAir.get
       ventilation.setOutdoorAirFlowRateFractionSchedule(model_add_schedule(model, 'Lab_FumeHood_Sch'))
     end

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.LargeDataCenterHighITE.rb

@@ -3,7 +3,6 @@
 # building types.
 module LargeDataCenterHighITE
   def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
-
     OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific adjustments')
 
     # add IT equipment (ITE object) for data center building types
@@ -22,7 +21,6 @@ module LargeDataCenterHighITE
   # Normal electric equipment has been added in model_add_load prior to this
   # will replace with ITE object here
   def add_data_center_load(model)
-
     model.getSpaceTypes.each do |space_type|
       # Get the standards data
       space_type_properties = space_type_get_standards_data(space_type)
@@ -32,27 +30,27 @@ module LargeDataCenterHighITE
       elec_equip_sch = space_type_properties['electric_equipment_schedule']
       elec_equip_have_info = true unless elec_equip_per_area.zero?
 
-      it_fan_power_ratio = 0.4/(1+0.4)   # assuming IT fan power is 0.4 of total CPU load
+      it_fan_power_ratio = 0.4 / (1 + 0.4) # assuming IT fan power is 0.4 of total CPU load
 
-      if (space_type.name.get.downcase.include?('computer')) || (space_type.name.get.downcase.include?('datacenter'))
+      if space_type.name.get.downcase.include?('computer') || space_type.name.get.downcase.include?('datacenter')
         if elec_equip_have_info
           it_equipment_def = OpenStudio::Model::ElectricEquipmentITEAirCooledDefinition.new(model)
-          it_equipment_def.setName("IT equipment def")
+          it_equipment_def.setName('IT equipment def')
           it_equipment_def.setWattsperZoneFloorArea(OpenStudio.convert(elec_equip_per_area.to_f, 'W/ft^2', 'W/m^2').get)
           it_equipment_def.setDesignFanAirFlowRateperPowerInput(0.0001)
           it_equipment_def.setDesignFanPowerInputFraction(it_fan_power_ratio)
-          it_equipment_def.setDesignEnteringAirTemperature(22.5)    # recommended SAT 18-27C, use the middle T as design
-          it_equipment_def.setAirFlowCalculationMethod("FlowControlWithApproachTemperatures")
+          it_equipment_def.setDesignEnteringAirTemperature(22.5) # recommended SAT 18-27C, use the middle T as design
+          it_equipment_def.setAirFlowCalculationMethod('FlowControlWithApproachTemperatures')
           # Set the approach temperatures based on CFD simulation results
-          it_equipment_def.setSupplyTemperatureDifference(9.43)   # This is under fully open configuration assumption, based on the lookup table in scorecard
-          it_equipment_def.setReturnTemperatureDifference(-7.55)   # This is under fully open configuration assumption, based on the lookup table in scorecard
+          it_equipment_def.setSupplyTemperatureDifference(9.43) # This is under fully open configuration assumption, based on the lookup table in scorecard
+          it_equipment_def.setReturnTemperatureDifference(-7.55) # This is under fully open configuration assumption, based on the lookup table in scorecard
           # after the bug in OpenStudio core is fixed, this temperature schedules was enabled
           it_equipment_def.setSupplyTemperatureDifferenceSchedule(model_add_schedule(model, 'LargeDataCenterHighITE SupplyApproachTemp_SCH'))   # This is under fully open configuration assumption, based on the lookup table in scorecard
           it_equipment_def.setReturnTemperatureDifferenceSchedule(model_add_schedule(model, 'LargeDataCenterHighITE ReturnApproachTemp_SCH'))   # This is under fully open configuration assumption, based on the lookup table in scorecard
 
           it_equipment = OpenStudio::Model::ElectricEquipmentITEAirCooled.new(it_equipment_def)
           it_equipment.setSpaceType(space_type)
-          it_equipment.setName("#{space_type.name.to_s} IT equipment")
+          it_equipment.setName("#{space_type.name} IT equipment")
           unless elec_equip_sch.nil?
             it_equipment.setDesignPowerInputSchedule(model_add_schedule(model, elec_equip_sch))
             OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.SpaceType', "#{space_type.name} set Design Power Input Schedule to #{elec_equip_sch}.")
@@ -65,60 +63,57 @@ module LargeDataCenterHighITE
     model.getElectricEquipments.each(&:remove)
   end
 
-  # TODO (maybe not): for large data center, if sized AHU is too big, implement multiple AHUs to the same zone.
-=begin
-  def update_crah_num(building_type,prototype_input,template,model,sizing_run_dir)
-
-    # get the chilled water loop
-    chilled_water_loop = nil
-    if model.getPlantLoopByName('Chilled Water Loop').is_initialized
-      chilled_water_loop = model.getPlantLoopByName('Chilled Water Loop').get
-    else
-      OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Chilled water loop doesn't exist for CRAH system. Failed to update CRAH number.")
-    end
-    # set no return plenum
-    return_plenum = nil
-
-    # get thermal zones
-    thermal_zones = []
-    space_name = 'DataCenter'
-    space = model.getSpaceByName(space_name)
-    if space.empty?
-      OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "No space called #{space_name} was found in the model")
-    end
-    space = space.get
-    zone = space.thermalZone
-    if zone.empty?
-      OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Space #{space_name} has no thermal zone; cannot add an HVAC system to this space.")
-    end
-    thermal_zones << zone.get
-    puts "thermal_zones = #{thermal_zones}"
-
-    # add another CRAH
-    model.add_crah(template,
-                   'test_system_name',
-                   chilled_water_loop,
-                   thermal_zones,
-                   prototype_input['vav_operation_schedule'],
-                   prototype_input['vav_oa_damper_schedule'],
-                   prototype_input['vav_fan_efficiency'],
-                   prototype_input['vav_fan_motor_efficiency'],
-                   prototype_input['vav_fan_pressure_rise'],
-                   return_plenum,
-                   building_type)
-
-    # Perform another sizing run to distribute air flow in multiple CRAH systems
-    if model.runSizingRun("#{sizing_run_dir}/SR2_DC") == false
-      return false
-    end
-
-  end
-=end
+  # TODO: (maybe) for large data center, if sized AHU is too big, implement multiple AHUs to the same zone.
+  # def update_crah_num(building_type,prototype_input,template,model,sizing_run_dir)
+  #   # get the chilled water loop
+  #   chilled_water_loop = nil
+  #   if model.getPlantLoopByName('Chilled Water Loop').is_initialized
+  #     chilled_water_loop = model.getPlantLoopByName('Chilled Water Loop').get
+  #   else
+  #     OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Chilled water loop doesn't exist for CRAH system. Failed to update CRAH number.")
+  #   end
+  #   # set no return plenum
+  #   return_plenum = nil
+  #
+  #   # get thermal zones
+  #   thermal_zones = []
+  #   space_name = 'DataCenter'
+  #   space = model.getSpaceByName(space_name)
+  #   if space.empty?
+  #     OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "No space called #{space_name} was found in the model")
+  #   end
+  #   space = space.get
+  #   zone = space.thermalZone
+  #   if zone.empty?
+  #     OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Space #{space_name} has no thermal zone; cannot add an HVAC system to this space.")
+  #   end
+  #   thermal_zones << zone.get
+  #   puts "thermal_zones = #{thermal_zones}"
+  #
+  #   # add another CRAH
+  #   model.add_crah(template,
+  #                  'test_system_name',
+  #                  chilled_water_loop,
+  #                  thermal_zones,
+  #                  prototype_input['vav_operation_schedule'],
+  #                  prototype_input['vav_oa_damper_schedule'],
+  #                  prototype_input['vav_fan_efficiency'],
+  #                  prototype_input['vav_fan_motor_efficiency'],
+  #                  prototype_input['vav_fan_pressure_rise'],
+  #                  return_plenum,
+  #                  building_type)
+  #
+  #   # Perform another sizing run to distribute air flow in multiple CRAH systems
+  #   if model.runSizingRun("#{sizing_run_dir}/SR2_DC") == false
+  #     return false
+  #   end
+  # end
 
   def modify_crah_sa_stpt_manager(model)
     supply_temp_sch = get_crah_supply_temp_sch(model)
     model.getSetpointManagerScheduleds.each do |stpt_manager|
       next unless stpt_manager.name.to_s.downcase == 'crah supply air setpoint manager'
+
       stpt_manager.setSchedule(supply_temp_sch)
     end
   end
@@ -166,7 +161,6 @@ module LargeDataCenterHighITE
   end
 
   def model_custom_swh_tweaks(model, building_type, climate_zone, prototype_input)
-
     return true
   end
 

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.LargeDataCenterLowITE.rb

@@ -3,7 +3,6 @@
 # building types.
 module LargeDataCenterLowITE
   def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
-
     OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific adjustments')
 
     # add IT equipment (ITE object) for data center building types
@@ -22,7 +21,6 @@ module LargeDataCenterLowITE
   # Normal electric equipment has been added in model_add_load prior to this
   # will replace with ITE object here
   def add_data_center_load(model)
-
     model.getSpaceTypes.each do |space_type|
       # Get the standards data
       space_type_properties = space_type_get_standards_data(space_type)
@@ -32,27 +30,27 @@ module LargeDataCenterLowITE
       elec_equip_sch = space_type_properties['electric_equipment_schedule']
       elec_equip_have_info = true unless elec_equip_per_area.zero?
 
-      it_fan_power_ratio = 0.4/(1+0.4)   # assuming IT fan power is 0.4 of total CPU load
+      it_fan_power_ratio = 0.4 / (1 + 0.4) # assuming IT fan power is 0.4 of total CPU load
 
-      if (space_type.name.get.downcase.include?('computer')) || (space_type.name.get.downcase.include?('datacenter'))
+      if space_type.name.get.downcase.include?('computer') || space_type.name.get.downcase.include?('datacenter')
         if elec_equip_have_info
           it_equipment_def = OpenStudio::Model::ElectricEquipmentITEAirCooledDefinition.new(model)
-          it_equipment_def.setName("IT equipment def")
+          it_equipment_def.setName('IT equipment def')
           it_equipment_def.setWattsperZoneFloorArea(OpenStudio.convert(elec_equip_per_area.to_f, 'W/ft^2', 'W/m^2').get)
           it_equipment_def.setDesignFanAirFlowRateperPowerInput(0.0001)
           it_equipment_def.setDesignFanPowerInputFraction(it_fan_power_ratio)
-          it_equipment_def.setDesignEnteringAirTemperature(22.5)    # recommended SAT 18-27C, use the middle T as design
-          it_equipment_def.setAirFlowCalculationMethod("FlowControlWithApproachTemperatures")
+          it_equipment_def.setDesignEnteringAirTemperature(22.5) # recommended SAT 18-27C, use the middle T as design
+          it_equipment_def.setAirFlowCalculationMethod('FlowControlWithApproachTemperatures')
           # Set the approach temperatures based on CFD simulation results
-          it_equipment_def.setSupplyTemperatureDifference(9.67)   # This is under fully open configuration assumption, based on the lookup table in scorecard
-          it_equipment_def.setReturnTemperatureDifference(-7.36)   # This is under fully open configuration assumption, based on the lookup table in scorecard
+          it_equipment_def.setSupplyTemperatureDifference(9.67) # This is under fully open configuration assumption, based on the lookup table in scorecard
+          it_equipment_def.setReturnTemperatureDifference(-7.36) # This is under fully open configuration assumption, based on the lookup table in scorecard
           # after the bug in OpenStudio core is fixed, this temperature schedules was enabled
-          it_equipment_def.setSupplyTemperatureDifferenceSchedule(model_add_schedule(model, 'LargeDataCenterLowITE SupplyApproachTemp_SCH'))   # This is under fully open configuration assumption, based on the lookup table in scorecard
+          it_equipment_def.setSupplyTemperatureDifferenceSchedule(model_add_schedule(model, 'LargeDataCenterLowITE SupplyApproachTemp_SCH')) # This is under fully open configuration assumption, based on the lookup table in scorecard
           it_equipment_def.setReturnTemperatureDifferenceSchedule(model_add_schedule(model, 'LargeDataCenterLowITE ReturnApproachTemp_SCH'))
 
           it_equipment = OpenStudio::Model::ElectricEquipmentITEAirCooled.new(it_equipment_def)
           it_equipment.setSpaceType(space_type)
-          it_equipment.setName("#{space_type.name.to_s} IT equipment")
+          it_equipment.setName("#{space_type.name} IT equipment")
           unless elec_equip_sch.nil?
             it_equipment.setDesignPowerInputSchedule(model_add_schedule(model, elec_equip_sch))
             OpenStudio.logFree(OpenStudio::Info, 'openstudio.standards.SpaceType', "#{space_type.name} set Design Power Input Schedule to #{elec_equip_sch}.")
@@ -66,60 +64,58 @@ module LargeDataCenterLowITE
     model.getElectricEquipments.each(&:remove)
   end
 
-  # TODO (maybe not): for large data center, if sized AHU is too big, implement multiple AHUs to the same zone.
-=begin
-    def update_crah_num(building_type,prototype_input,template,model,sizing_run_dir)
-
-      # get the chilled water loop
-      chilled_water_loop = nil
-      if model.getPlantLoopByName('Chilled Water Loop').is_initialized
-        chilled_water_loop = model.getPlantLoopByName('Chilled Water Loop').get
-      else
-        OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Chilled water loop doesn't exist for CRAH system. Failed to update CRAH number.")
-      end
-      # set no return plenum
-      return_plenum = nil
-
-      # get thermal zones
-      thermal_zones = []
-      space_name = 'DataCenter'
-      space = model.getSpaceByName(space_name)
-      if space.empty?
-        OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "No space called #{space_name} was found in the model")
-      end
-      space = space.get
-      zone = space.thermalZone
-      if zone.empty?
-        OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Space #{space_name} has no thermal zone; cannot add an HVAC system to this space.")
-      end
-      thermal_zones << zone.get
-      puts "thermal_zones = #{thermal_zones}"
-
-      # add another CRAH
-      model.add_crah(template,
-                     'test_system_name',
-                     chilled_water_loop,
-                     thermal_zones,
-                     prototype_input['vav_operation_schedule'],
-                     prototype_input['vav_oa_damper_schedule'],
-                     prototype_input['vav_fan_efficiency'],
-                     prototype_input['vav_fan_motor_efficiency'],
-                     prototype_input['vav_fan_pressure_rise'],
-                     return_plenum,
-                     building_type)
-
-      # Perform another sizing run to distribute air flow in multiple CRAH systems
-      if model.runSizingRun("#{sizing_run_dir}/SR2_DC") == false
-        return false
-      end
-
-    end
-=end
+  # TODO: (maybe) for large data center, if sized AHU is too big, implement multiple AHUs to the same zone.
+  # def update_crah_num(building_type,prototype_input,template,model,sizing_run_dir)
+  #
+  #   # get the chilled water loop
+  #   chilled_water_loop = nil
+  #   if model.getPlantLoopByName('Chilled Water Loop').is_initialized
+  #     chilled_water_loop = model.getPlantLoopByName('Chilled Water Loop').get
+  #   else
+  #     OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Chilled water loop doesn't exist for CRAH system. Failed to update CRAH number.")
+  #   end
+  #   # set no return plenum
+  #   return_plenum = nil
+  #
+  #   # get thermal zones
+  #   thermal_zones = []
+  #   space_name = 'DataCenter'
+  #   space = model.getSpaceByName(space_name)
+  #   if space.empty?
+  #     OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "No space called #{space_name} was found in the model")
+  #   end
+  #   space = space.get
+  #   zone = space.thermalZone
+  #   if zone.empty?
+  #     OpenStudio.logFree(OpenStudio::Error, 'openstudio.model.Model', "Space #{space_name} has no thermal zone; cannot add an HVAC system to this space.")
+  #   end
+  #   thermal_zones << zone.get
+  #   puts "thermal_zones = #{thermal_zones}"
+  #
+  #   # add another CRAH
+  #   model.add_crah(template,
+  #                  'test_system_name',
+  #                  chilled_water_loop,
+  #                  thermal_zones,
+  #                  prototype_input['vav_operation_schedule'],
+  #                  prototype_input['vav_oa_damper_schedule'],
+  #                  prototype_input['vav_fan_efficiency'],
+  #                  prototype_input['vav_fan_motor_efficiency'],
+  #                  prototype_input['vav_fan_pressure_rise'],
+  #                  return_plenum,
+  #                  building_type)
+  #
+  #   # Perform another sizing run to distribute air flow in multiple CRAH systems
+  #   if model.runSizingRun("#{sizing_run_dir}/SR2_DC") == false
+  #     return false
+  #   end
+  # end
 
   def modify_crah_sa_stpt_manager(model)
     supply_temp_sch = get_crah_supply_temp_sch(model)
     model.getSetpointManagerScheduleds.each do |stpt_manager|
       next unless stpt_manager.name.to_s.downcase == 'crah supply air setpoint manager'
+
       stpt_manager.setSchedule(supply_temp_sch)
     end
   end