openstudio-standards 0.2.12.rc4 → 0.2.13.rc3

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.MediumOfficeDetailed.rb

@@ -1,4 +1,3 @@
-
 # Custom changes for the MediumOffice prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
@@ -39,8 +38,8 @@ module MediumOfficeDetailed
       infiltration_per_zone_entrydoor = 0
       if template == '90.1-2004'
         infiltration_per_zone_entrydoor = 1.04300287
-        infiltration_entrydoor.setSchedule(model_add_schedule(model,'OfficeMedium INFIL_Door_Opening_SCH'))
-      elsif template == '90.1-2007' || template == '90.1-2010'|| template == '90.1-2013'
+        infiltration_entrydoor.setSchedule(model_add_schedule(model, 'OfficeMedium INFIL_Door_Opening_SCH'))
+      elsif template == '90.1-2007' || template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019'
         case climate_zone
         when 'ASHRAE 169-2006-1A', 'ASHRAE 169-2006-2A', 'ASHRAE 169-2006-1B', 'ASHRAE 169-2006-2B'
           infiltration_per_zone_entrydoor = 1.04300287
@@ -53,68 +52,65 @@ module MediumOfficeDetailed
       infiltration_entrydoor.setDesignFlowRate(infiltration_per_zone_entrydoor)
       infiltration_entrydoor.setSpace(entry_space)
     end
-  end  
+  end
 
-# def model_custom_daylighting_tweaks(building_type, climate_zone, prototype_input, model)
-#    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Adjusting daylight sensor positions and fractions')
-#
-#    adjustments = [
-#        { 'stds_spc_type' => 'WholeBuilding - Md Office',
-#          'sensor_1_frac' => 0.3835,
-#          'sensor_2_frac' => 0.1395,
-#        }
-#    ]
-#
-    # Adjust daylight sensors in each space
-#    model.getSpaces.each do |space|
-#      next if space.thermalZone.empty?
-#      zone = space.thermalZone.get
-#      next if space.spaceType.empty?
-#      spc_type = space.spaceType.get
-#      next if spc_type.standardsSpaceType.empty?
-#      stds_spc_type = spc_type.standardsSpaceType.get
-#      adjustments.each do |adj|
-#        next unless adj['stds_spc_type'] == stds_spc_type
-#        # Adjust the primary sensor
-#        if adj['sensor_1_frac'] && zone.primaryDaylightingControl.is_initialized
-#          OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting primary daylight sensor to control #{adj['sensor_1_frac']} of the lighting.")
-#          zone.setFractionofZoneControlledbyPrimaryDaylightingControl(adj['sensor_1_frac'])
-#          pri_ctrl = zone.primaryDaylightingControl.get
-#          if adj['sensor_1_xyz']
-#            x = adj['sensor_1_xyz'][0]
-#            y = adj['sensor_1_xyz'][1]
-#            z = adj['sensor_1_xyz'][2]
-#            OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting primary daylight sensor position to [#{x}, #{y}, #{z}].")
-#            pri_ctrl.setPositionXCoordinate(x)
-#            pri_ctrl.setPositionYCoordinate(y)
-#            pri_ctrl.setPositionZCoordinate(z)
-#          end
-#        end
-        # Adjust the secondary sensor
-#        if adj['sensor_2_frac'] && zone.secondaryDaylightingControl.is_initialized
-#          OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting secondary daylight sensor to control #{adj['sensor_2_frac']} of the lighting.")
-#          zone.setFractionofZoneControlledbySecondaryDaylightingControl(adj['sensor_2_frac'])
-#          sec_ctrl = zone.secondaryDaylightingControl.get
-#          if adj['sensor_2_xyz']
-#            x = adj['sensor_2_xyz'][0]
-#            y = adj['sensor_2_xyz'][1]
-#            z = adj['sensor_2_xyz'][2]
-#            OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting secondary daylight sensor position to [#{x}, #{y}, #{z}].")
-#            sec_ctrl.setPositionXCoordinate(x)
-#            sec_ctrl.setPositionYCoordinate(y)
-#            sec_ctrl.setPositionZCoordinate(z)
-#          end
-#        end
-#
-#      end
-#    end
-#
-#    return true
-#  end
+  # def model_custom_daylighting_tweaks(building_type, climate_zone, prototype_input, model)
+  #   OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Adjusting daylight sensor positions and fractions')
+  #
+  #   adjustments = [
+  #     { 'stds_spc_type' => 'WholeBuilding - Md Office',
+  #       'sensor_1_frac' => 0.3835,
+  #       'sensor_2_frac' => 0.1395 }
+  #   ]
+  #
+  #   # Adjust daylight sensors in each space
+  #   model.getSpaces.each do |space|
+  #     next if space.thermalZone.empty?
+  #     zone = space.thermalZone.get
+  #     next if space.spaceType.empty?
+  #     spc_type = space.spaceType.get
+  #     next if spc_type.standardsSpaceType.empty?
+  #     stds_spc_type = spc_type.standardsSpaceType.get
+  #     adjustments.each do |adj|
+  #       next unless adj['stds_spc_type'] == stds_spc_type
+  #       # Adjust the primary sensor
+  #       if adj['sensor_1_frac'] && zone.primaryDaylightingControl.is_initialized
+  #         OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting primary daylight sensor to control #{adj['sensor_1_frac']} of the lighting.")
+  #         zone.setFractionofZoneControlledbyPrimaryDaylightingControl(adj['sensor_1_frac'])
+  #         pri_ctrl = zone.primaryDaylightingControl.get
+  #         if adj['sensor_1_xyz']
+  #           x = adj['sensor_1_xyz'][0]
+  #           y = adj['sensor_1_xyz'][1]
+  #           z = adj['sensor_1_xyz'][2]
+  #           OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting primary daylight sensor position to [#{x}, #{y}, #{z}].")
+  #           pri_ctrl.setPositionXCoordinate(x)
+  #           pri_ctrl.setPositionYCoordinate(y)
+  #           pri_ctrl.setPositionZCoordinate(z)
+  #         end
+  #       end
+  #       # Adjust the secondary sensor
+  #       if adj['sensor_2_frac'] && zone.secondaryDaylightingControl.is_initialized
+  #         OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting secondary daylight sensor to control #{adj['sensor_2_frac']} of the lighting.")
+  #         zone.setFractionofZoneControlledbySecondaryDaylightingControl(adj['sensor_2_frac'])
+  #         sec_ctrl = zone.secondaryDaylightingControl.get
+  #         if adj['sensor_2_xyz']
+  #           x = adj['sensor_2_xyz'][0]
+  #           y = adj['sensor_2_xyz'][1]
+  #           z = adj['sensor_2_xyz'][2]
+  #           OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', "For #{zone.name}: Adjusting secondary daylight sensor position to [#{x}, #{y}, #{z}].")
+  #           sec_ctrl.setPositionXCoordinate(x)
+  #           sec_ctrl.setPositionYCoordinate(y)
+  #           sec_ctrl.setPositionZCoordinate(z)
+  #         end
+  #       end
+  #     end
+  #   end
+  #   return true
+  # end
 
   def update_waterheater_loss_coefficient(model)
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', 'NECB2011'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019', 'NECB2011'
         model.getWaterHeaterMixeds.sort.each do |water_heater|
           water_heater.setOffCycleLossCoefficienttoAmbientTemperature(7.561562668)
           water_heater.setOnCycleLossCoefficienttoAmbientTemperature(7.561562668)
@@ -129,12 +125,14 @@ module MediumOfficeDetailed
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
 
     return true
   end
 
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = template == '90.1-2010' || template == '90.1-2013' ? 0.2 : 0.3
+    min_damper_position = template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019' ? 0.2 : 0.3
 
     # Set the minimum flow fraction
     air_terminal_single_duct_vav_reheat.setConstantMinimumAirFlowFraction(min_damper_position)

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.MidriseApartment.rb

@@ -1,4 +1,3 @@
-
 # Custom changes for the MidriseApartment prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
@@ -26,9 +25,11 @@ module MidriseApartment
     case template
       when '90.1-2004', '90.1-2007', '90.1-2010'
         case climate_zone
-          when 'ASHRAE 169-2006-1B',
+          when 'ASHRAE 169-2006-0B',
+               'ASHRAE 169-2006-1B',
                'ASHRAE 169-2006-2B',
                'ASHRAE 169-2006-3B',
+               'ASHRAE 169-2013-0B',
                'ASHRAE 169-2013-1B',
                'ASHRAE 169-2013-2B',
                'ASHRAE 169-2013-3B'
@@ -45,7 +46,7 @@ module MidriseApartment
     elec_equip_def1.setName('Ground Corridor Electric Equipment Definition1')
     elec_equip_def2.setName('Ground Corridor Electric Equipment Definition2')
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         elec_equip_def1.setFractionLatent(0)
         elec_equip_def1.setFractionRadiant(0)
         elec_equip_def1.setFractionLost(0.95)
@@ -53,7 +54,7 @@ module MidriseApartment
         elec_equip_def2.setFractionRadiant(0)
         elec_equip_def2.setFractionLost(0.95)
         elec_equip_def1.setDesignLevel(16_055)
-        if template == '90.1-2013'
+        if template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019'
           elec_equip_def2.setDesignLevel(63)
         elsif template == '90.1-2010'
           elec_equip_def2.setDesignLevel(105.9)
@@ -71,7 +72,7 @@ module MidriseApartment
         case template
           when '90.1-2004', '90.1-2007'
             elec_equip2.setSchedule(model_add_schedule(model, 'ApartmentMidRise ELEV_LIGHT_FAN_SCH_24_7'))
-          when '90.1-2010', '90.1-2013'
+          when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
             elec_equip2.setSchedule(model_add_schedule(model, 'ApartmentMidRise ELEV_LIGHT_FAN_SCH_ADD_DF'))
         end
       when 'DOE Ref Pre-1980', 'DOE Ref 1980-2004'
@@ -92,7 +93,7 @@ module MidriseApartment
     case template
       when 'DOE Ref 1980-2004', 'DOE Ref Pre-1980'
         # no door infiltration in these two vintages
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         g_corridor = model.getSpaceByName('G Corridor').get
         infiltration_g_corridor_door = OpenStudio::Model::SpaceInfiltrationDesignFlowRate.new(model)
         infiltration_g_corridor_door.setName('G Corridor door Infiltration')
@@ -103,11 +104,15 @@ module MidriseApartment
             infiltration_g_corridor_door.setSchedule(model_add_schedule(model, 'ApartmentMidRise INFIL_Door_Opening_SCH_2004_2007'))
           when '90.1-2007'
             case climate_zone
-              when 'ASHRAE 169-2006-1A',
+              when 'ASHRAE 169-2006-0A',
+                   'ASHRAE 169-2006-1A',
+                   'ASHRAE 169-2006-0B',
                    'ASHRAE 169-2006-1B',
                    'ASHRAE 169-2006-2A',
                    'ASHRAE 169-2006-2B',
+                   'ASHRAE 169-2013-0A',
                    'ASHRAE 169-2013-1A',
+                   'ASHRAE 169-2013-0B',
                    'ASHRAE 169-2013-1B',
                    'ASHRAE 169-2013-2A',
                    'ASHRAE 169-2013-2B'
@@ -116,13 +121,17 @@ module MidriseApartment
                 infiltration_g_corridor_door.setDesignFlowRate(0.327531218)
             end
             infiltration_g_corridor_door.setSchedule(model_add_schedule(model, 'ApartmentMidRise INFIL_Door_Opening_SCH_2004_2007'))
-          when '90.1-2010', '90.1-2013'
+          when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
             case climate_zone
-              when 'ASHRAE 169-2006-1A',
+              when 'ASHRAE 169-2006-0A',
+                   'ASHRAE 169-2006-1A',
+                   'ASHRAE 169-2006-0B',
                    'ASHRAE 169-2006-1B',
                    'ASHRAE 169-2006-2A',
                    'ASHRAE 169-2006-2B',
+                   'ASHRAE 169-2013-0A',
                    'ASHRAE 169-2013-1A',
+                   'ASHRAE 169-2013-0B',
                    'ASHRAE 169-2013-1B',
                    'ASHRAE 169-2013-2A',
                    'ASHRAE 169-2013-2B'
@@ -133,20 +142,21 @@ module MidriseApartment
             infiltration_g_corridor_door.setSchedule(model_add_schedule(model, 'ApartmentMidRise INFIL_Door_Opening_SCH_2010_2013'))
         end
 
-      # Door infiltration in model not impacted by wind or temperature
-      infiltration_g_corridor_door.setConstantTermCoefficient(1.0)
-      infiltration_g_corridor_door.setTemperatureTermCoefficient(0.0)
-      infiltration_g_corridor_door.setVelocityTermCoefficient(0.0)
-      infiltration_g_corridor_door.setVelocitySquaredTermCoefficient(0.0)
+        # Door infiltration in model not impacted by wind or temperature
+        infiltration_g_corridor_door.setConstantTermCoefficient(1.0)
+        infiltration_g_corridor_door.setTemperatureTermCoefficient(0.0)
+        infiltration_g_corridor_door.setVelocityTermCoefficient(0.0)
+        infiltration_g_corridor_door.setVelocitySquaredTermCoefficient(0.0)
     end
   end
 
   def model_custom_swh_tweaks(model, building_type, climate_zone, prototype_input)
-
     return true
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
 
     return true
   end

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.Outpatient.rb

@@ -1,4 +1,3 @@
-
 # Custom changes for the Outpatient prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
@@ -86,7 +85,7 @@ module Outpatient
     elec_equip.setName('Elevator Pump Room Elevator Equipment')
     elec_equip.setSpace(elevator_pump_room)
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         elec_equip.setSchedule(model_add_schedule(model, 'OutPatientHealthCare BLDG_ELEVATORS'))
 
         # add elevator fan and lights for 90.1 prototypes
@@ -101,7 +100,7 @@ module Outpatient
           elec_equip_def2.setDesignLevel(485.7)
         when '90.1-2010'
           elec_equip_def2.setDesignLevel(317.7)
-        when '90.1-2013'
+        when '90.1-2013', '90.1-2016', '90.1-2019'
           elec_equip_def2.setDesignLevel(188)
         end
 
@@ -112,12 +111,12 @@ module Outpatient
         case template # light fan schedule for outpatient already exist in the schedule data sheet.
         when '90.1-2004', '90.1-2007'
           elec_equip2.setSchedule(model_add_schedule(model, 'OutPatientHealthCare ELEV_LIGHT_FAN_SCH_24_7'))
-        when '90.1-2010', '90.1-2013'
+        when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
           elec_equip2.setSchedule(model_add_schedule(model, 'OutPatientHealthCare ELEV_LIGHT_FAN_SCH_ADD_DF'))
         end
 
     when 'DOE Ref Pre-1980', 'DOE Ref 1980-2004'
-        elec_equip.setSchedule(model_add_schedule(model, 'OutPatientHealthCare BLDG_ELEVATORS_Pre2004'))
+      elec_equip.setSchedule(model_add_schedule(model, 'OutPatientHealthCare BLDG_ELEVATORS_Pre2004'))
     end
     return true
   end
@@ -130,9 +129,11 @@ module Outpatient
       case template
         when '90.1-2004', '90.1-2007', '90.1-2010'
           case climate_zone
-            when 'ASHRAE 169-2006-1B',
+            when 'ASHRAE 169-2006-0B',
+                 'ASHRAE 169-2006-1B',
                  'ASHRAE 169-2006-2B',
                  'ASHRAE 169-2006-3B',
+                 'ASHRAE 169-2013-0B',
                  'ASHRAE 169-2013-1B',
                  'ASHRAE 169-2013-2B',
                  'ASHRAE 169-2013-3B'
@@ -193,11 +194,13 @@ module Outpatient
           when '90.1-2004'
             infiltration_rate_vestibule_door = 1.186002811
             infiltration_vestibule_door.setSchedule(model_add_schedule(model, 'OutPatientHealthCare INFIL_Door_Opening_SCH_0.144'))
-          when '90.1-2007', '90.1-2010', '90.1-2013'
+          when '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
             case climate_zone
-              when 'ASHRAE 169-2006-1A',
+              when 'ASHRAE 169-2006-0A',
+                   'ASHRAE 169-2006-1A',
                    'ASHRAE 169-2006-2A',
                    'ASHRAE 169-2006-2B',
+                   'ASHRAE 169-2013-0A',
                    'ASHRAE 169-2013-1A',
                    'ASHRAE 169-2013-2A',
                    'ASHRAE 169-2013-2B'
@@ -239,7 +242,7 @@ module Outpatient
         humidifier.addToNode(heating_coil_outlet_node)
         humidity_spm = OpenStudio::Model::SetpointManagerSingleZoneHumidityMinimum.new(model)
         case template
-          when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+          when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
             create_coil_heating_electric(model,
                                          air_loop_node: supply_outlet_node,
                                          name: 'AHU1 extra Electric Htg Coil')
@@ -267,9 +270,9 @@ module Outpatient
         controller_mv.setAvailabilitySchedule(model.alwaysOffDiscreteSchedule)
         # add minimum fraction of outdoor air schedule to AHU1
         controller_oa.setMinimumFractionofOutdoorAirSchedule(model_add_schedule(model, 'OutPatientHealthCare AHU-1_OAminOAFracSchedule'))
-        # for AHU2, at vintages '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', the minimum OA schedule is not the same as
+        # for AHU2, at vintages '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019' the minimum OA schedule is not the same as
         # airloop availability schedule, but separately assigned.
-      elsif template == '90.1-2004' || template == '90.1-2007' || template == '90.1-2010' || template == '90.1-2013'
+      elsif template == '90.1-2004' || template == '90.1-2007' || template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019'
         controller_oa.setMinimumOutdoorAirSchedule(model_add_schedule(model, 'OutPatientHealthCare BLDG_OA_SCH'))
         # add minimum fraction of outdoor air schedule to AHU2
         controller_oa.setMinimumFractionofOutdoorAirSchedule(model_add_schedule(model, 'OutPatientHealthCare BLDG_OA_FRAC_SCH'))
@@ -323,7 +326,7 @@ module Outpatient
           # Based on AIA 2001 ventilation requirements
           # See Section 5.2.2.16 in Thornton et al. 2010
           # https://www.energycodes.gov/sites/default/files/documents/BECP_Energy_Cost_Savings_STD2010_May2011_v00.pdf
-          when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+          when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
             zone_name = zone.name.to_s.upcase.gsub(' ZN', '').strip
             if init_mdp.key? zone_name
               air_terminal.setConstantMinimumAirFlowFraction(init_mdp[zone_name])
@@ -334,18 +337,18 @@ module Outpatient
     end
   end
 
-  # For operating room 1&2 in 2010 and 2013, VAV minimum air flow is set by schedule
+  # For operating room 1&2 in 2010, 2013, 2016, and 2019 VAV minimum air flow is set by schedule
   # This is NOT called in model_custom_hvac_tweaks,
   # instead it is called by model_reset_or_room_vav_minimum_damper AFTER the sizing run,
   # so that the system is sized at a constant airflow fraction of 1.0,
   # not 0.3 as defaulted in the zone sizing object
   def model_reset_or_room_vav_minimum_damper(prototype_input, model)
     case template
-    when '90.1-2010', '90.1-2013'
+    when '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
       model.getAirTerminalSingleDuctVAVReheats.sort.each do |air_terminal|
         air_terminal_name = air_terminal.name.get
         if air_terminal_name.include?('Floor 1 Operating Room 1') || air_terminal_name.include?('Floor 1 Operating Room 2')
-          air_terminal.setZoneMinimumAirFlowMethod('Scheduled')
+          air_terminal.setZoneMinimumAirFlowInputMethod('Scheduled')
           air_terminal.setMinimumAirFlowFractionSchedule(model_add_schedule(model, 'OutPatientHealthCare OR_MinSA_Sched'))
         end
       end
@@ -362,7 +365,7 @@ module Outpatient
 
   def model_update_exhaust_fan_efficiency(model)
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         model.getFanZoneExhausts.sort.each do |exhaust_fan|
           fan_name = exhaust_fan.name.to_s
           if (fan_name.include? 'X-Ray') || (fan_name.include? 'MRI Room')
@@ -386,9 +389,9 @@ module Outpatient
     model.getSpaces.sort.each do |space|
       space_type_name = space.spaceType.get.standardsSpaceType.get
       search_criteria = {
-          'template' => template,
-          'building_type' => building_type,
-          'space_type' => space_type_name
+        'template' => template,
+        'building_type' => building_type,
+        'space_type' => space_type_name
       }
       data = standards_lookup_table_first(table_name: 'space_types', search_criteria: search_criteria)
 
@@ -413,18 +416,19 @@ module Outpatient
       case template
         when 'DOE Ref Pre-1980', 'DOE Ref 1980-2004'
           sizingzone.setCoolingMinimumAirFlow(minimum_airflow_per_zone)
-        when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+        when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
           sizingzone.setCoolingMinimumAirFlowperZoneFloorArea(minimum_airflow_per_zone_floor_area)
       end
     end
   end
 
   def model_custom_swh_tweaks(model, building_type, climate_zone, prototype_input)
-
     return true
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
 
     return true
   end
@@ -457,7 +461,7 @@ module Outpatient
         'FLOOR 3 STORAGE 1' => 1.0,
         'FLOOR 3 TREATMENT' => 1.0
       }
-    elsif template == '90.1-2010' || template == '90.1-2013'
+    elsif template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019'
       min_damper_position = 0.2
       init_mdp = {
         'FLOOR 2 CONFERENCE TOILET' => 1.0,
@@ -498,4 +502,12 @@ module Outpatient
 
     return true
   end
+
+  # Type of SAT reset for this building type
+  #
+  # @param air_loop_hvac [OpenStudio::model::AirLoopHVAC] Airloop
+  # @return [String] Returns type of SAT reset
+  def air_loop_hvac_supply_air_temperature_reset_type(air_loop_hvac)
+    return 'oa'
+  end
 end

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.PrimarySchool.rb

@@ -1,18 +1,21 @@
-
 # Custom changes for the PrimarySchool prototype.
 # These are changes that are inconsistent with other prototype
 # building types.
 module PrimarySchool
   def model_custom_hvac_tweaks(building_type, climate_zone, prototype_input, model)
-    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific adjustments')
+    OpenStudio.logFree(OpenStudio::Info, 'openstudio.model.Model', 'Started building type specific HVAC adjustments')
 
     # add transformer
-    transformer_efficiency = nil
+    # efficiency based on a 113 kVA transformer
     case template
     when '90.1-2004', '90.1-2007'
       transformer_efficiency = 0.969
     when '90.1-2010', '90.1-2013'
       transformer_efficiency = 0.982
+    when '90.1-2016', '90.1-2019'
+      transformer_efficiency = 0.987
+    else
+      transformer_efficiency = nil
     end
     return true unless !transformer_efficiency.nil?
 
@@ -37,14 +40,14 @@ module PrimarySchool
     elec_equip_def1.setName('Kitchen Electric Equipment Definition1')
     elec_equip_def2.setName('Kitchen Electric Equipment Definition2')
     case template
-      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013'
+      when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
         elec_equip_def1.setFractionLatent(0)
         elec_equip_def1.setFractionRadiant(0.25)
         elec_equip_def1.setFractionLost(0)
         elec_equip_def2.setFractionLatent(0)
         elec_equip_def2.setFractionRadiant(0.25)
         elec_equip_def2.setFractionLost(0)
-        if template == '90.1-2013'
+        if template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019'
           elec_equip_def1.setDesignLevel(915)
           elec_equip_def2.setDesignLevel(570)
         else
@@ -67,7 +70,7 @@ module PrimarySchool
     model.getWaterHeaterMixeds.sort.each do |water_heater|
       if water_heater.name.to_s.include?('Booster')
         water_heater.resetAmbientTemperatureSchedule
-        water_heater.setAmbientTemperatureIndicator('ThermalZone')		
+        water_heater.setAmbientTemperatureIndicator('ThermalZone')
         water_heater.setAmbientTemperatureThermalZone(model.getThermalZoneByName('Kitchen_ZN_1_FLR_1 ZN').get)
       end
     end
@@ -80,16 +83,37 @@ module PrimarySchool
   end
 
   def model_custom_geometry_tweaks(building_type, climate_zone, prototype_input, model)
+    # Set original building North axis
+    model_set_building_north_axis(model, 0.0)
 
     return true
   end
 
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = template == '90.1-2010' || template == '90.1-2013' ? 0.2 : 0.3
+    min_damper_position = template == '90.1-2010' || template == '90.1-2013' || template == '90.1-2016' || template == '90.1-2019' ? 0.2 : 0.3
 
     # Set the minimum flow fraction
     air_terminal_single_duct_vav_reheat.setConstantMinimumAirFlowFraction(min_damper_position)
 
     return true
   end
+
+  # Type of SAT reset for this building type
+  #
+  # @param air_loop_hvac [OpenStudio::model::AirLoopHVAC] Airloop
+  # @return [String] Returns type of SAT reset
+  def air_loop_hvac_supply_air_temperature_reset_type(air_loop_hvac)
+    return 'oa'
+  end
+
+  # List transfer air target and source zones, and air flow (cfm)
+  #
+  # code_sections [90.1-2019_6.5.7.1], [90.1-2016_6.5.7.1]
+  # @return [Hash] target zones (key) and source zones (value) and air flow (value)
+  def model_transfer_air_target_and_source_zones(model)
+    model_transfer_air_target_and_source_zones_hash = {
+      'Bath_ZN_1_FLR_1 ZN' => ['Library_Media_Center_ZN_1_FLR_1 ZN', 600.0]
+    }
+    return model_transfer_air_target_and_source_zones_hash
+  end
 end