esruby 0.0.0

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/doc/pcrepattern.3

@@ -0,0 +1,2983 @@
+.TH PCREPATTERN 3 "11 November 2012" "PCRE 8.32"
+.SH NAME
+PCRE - Perl-compatible regular expressions
+.SH "PCRE REGULAR EXPRESSION DETAILS"
+.rs
+.sp
+The syntax and semantics of the regular expressions that are supported by PCRE
+are described in detail below. There is a quick-reference syntax summary in the
+.\" HREF
+\fBpcresyntax\fP
+.\"
+page. PCRE tries to match Perl syntax and semantics as closely as it can. PCRE
+also supports some alternative regular expression syntax (which does not
+conflict with the Perl syntax) in order to provide some compatibility with
+regular expressions in Python, .NET, and Oniguruma.
+.P
+Perl's regular expressions are described in its own documentation, and
+regular expressions in general are covered in a number of books, some of which
+have copious examples. Jeffrey Friedl's "Mastering Regular Expressions",
+published by O'Reilly, covers regular expressions in great detail. This
+description of PCRE's regular expressions is intended as reference material.
+.P
+The original operation of PCRE was on strings of one-byte characters. However,
+there is now also support for UTF-8 strings in the original library, an
+extra library that supports 16-bit and UTF-16 character strings, and a
+third library that supports 32-bit and UTF-32 character strings. To use these
+features, PCRE must be built to include appropriate support. When using UTF
+strings you must either call the compiling function with the PCRE_UTF8,
+PCRE_UTF16, or PCRE_UTF32 option, or the pattern must start with one of
+these special sequences:
+.sp
+  (*UTF8)
+  (*UTF16)
+  (*UTF32)
+  (*UTF)
+.sp
+(*UTF) is a generic sequence that can be used with any of the libraries.
+Starting a pattern with such a sequence is equivalent to setting the relevant
+option. This feature is not Perl-compatible. How setting a UTF mode affects
+pattern matching is mentioned in several places below. There is also a summary
+of features in the
+.\" HREF
+\fBpcreunicode\fP
+.\"
+page.
+.P
+Another special sequence that may appear at the start of a pattern or in
+combination with (*UTF8), (*UTF16), (*UTF32) or (*UTF) is:
+.sp
+  (*UCP)
+.sp
+This has the same effect as setting the PCRE_UCP option: it causes sequences
+such as \ed and \ew to use Unicode properties to determine character types,
+instead of recognizing only characters with codes less than 128 via a lookup
+table.
+.P
+If a pattern starts with (*NO_START_OPT), it has the same effect as setting the
+PCRE_NO_START_OPTIMIZE option either at compile or matching time. There are
+also some more of these special sequences that are concerned with the handling
+of newlines; they are described below.
+.P
+The remainder of this document discusses the patterns that are supported by
+PCRE when one its main matching functions, \fBpcre_exec()\fP (8-bit) or
+\fBpcre[16|32]_exec()\fP (16- or 32-bit), is used. PCRE also has alternative
+matching functions, \fBpcre_dfa_exec()\fP and \fBpcre[16|32_dfa_exec()\fP,
+which match using a different algorithm that is not Perl-compatible. Some of
+the features discussed below are not available when DFA matching is used. The
+advantages and disadvantages of the alternative functions, and how they differ
+from the normal functions, are discussed in the
+.\" HREF
+\fBpcrematching\fP
+.\"
+page.
+.
+.
+.SH "EBCDIC CHARACTER CODES"
+.rs
+.sp
+PCRE can be compiled to run in an environment that uses EBCDIC as its character
+code rather than ASCII or Unicode (typically a mainframe system). In the
+sections below, character code values are ASCII or Unicode; in an EBCDIC
+environment these characters may have different code values, and there are no
+code points greater than 255.
+.
+.
+.\" HTML <a name="newlines"></a>
+.SH "NEWLINE CONVENTIONS"
+.rs
+.sp
+PCRE supports five different conventions for indicating line breaks in
+strings: a single CR (carriage return) character, a single LF (linefeed)
+character, the two-character sequence CRLF, any of the three preceding, or any
+Unicode newline sequence. The
+.\" HREF
+\fBpcreapi\fP
+.\"
+page has
+.\" HTML <a href="pcreapi.html#newlines">
+.\" </a>
+further discussion
+.\"
+about newlines, and shows how to set the newline convention in the
+\fIoptions\fP arguments for the compiling and matching functions.
+.P
+It is also possible to specify a newline convention by starting a pattern
+string with one of the following five sequences:
+.sp
+  (*CR)        carriage return
+  (*LF)        linefeed
+  (*CRLF)      carriage return, followed by linefeed
+  (*ANYCRLF)   any of the three above
+  (*ANY)       all Unicode newline sequences
+.sp
+These override the default and the options given to the compiling function. For
+example, on a Unix system where LF is the default newline sequence, the pattern
+.sp
+  (*CR)a.b
+.sp
+changes the convention to CR. That pattern matches "a\enb" because LF is no
+longer a newline. Note that these special settings, which are not
+Perl-compatible, are recognized only at the very start of a pattern, and that
+they must be in upper case. If more than one of them is present, the last one
+is used.
+.P
+The newline convention affects where the circumflex and dollar assertions are
+true. It also affects the interpretation of the dot metacharacter when
+PCRE_DOTALL is not set, and the behaviour of \eN. However, it does not affect
+what the \eR escape sequence matches. By default, this is any Unicode newline
+sequence, for Perl compatibility. However, this can be changed; see the
+description of \eR in the section entitled
+.\" HTML <a href="#newlineseq">
+.\" </a>
+"Newline sequences"
+.\"
+below. A change of \eR setting can be combined with a change of newline
+convention.
+.
+.
+.SH "CHARACTERS AND METACHARACTERS"
+.rs
+.sp
+A regular expression is a pattern that is matched against a subject string from
+left to right. Most characters stand for themselves in a pattern, and match the
+corresponding characters in the subject. As a trivial example, the pattern
+.sp
+  The quick brown fox
+.sp
+matches a portion of a subject string that is identical to itself. When
+caseless matching is specified (the PCRE_CASELESS option), letters are matched
+independently of case. In a UTF mode, PCRE always understands the concept of
+case for characters whose values are less than 128, so caseless matching is
+always possible. For characters with higher values, the concept of case is
+supported if PCRE is compiled with Unicode property support, but not otherwise.
+If you want to use caseless matching for characters 128 and above, you must
+ensure that PCRE is compiled with Unicode property support as well as with
+UTF support.
+.P
+The power of regular expressions comes from the ability to include alternatives
+and repetitions in the pattern. These are encoded in the pattern by the use of
+\fImetacharacters\fP, which do not stand for themselves but instead are
+interpreted in some special way.
+.P
+There are two different sets of metacharacters: those that are recognized
+anywhere in the pattern except within square brackets, and those that are
+recognized within square brackets. Outside square brackets, the metacharacters
+are as follows:
+.sp
+  \e      general escape character with several uses
+  ^      assert start of string (or line, in multiline mode)
+  $      assert end of string (or line, in multiline mode)
+  .      match any character except newline (by default)
+  [      start character class definition
+  |      start of alternative branch
+  (      start subpattern
+  )      end subpattern
+  ?      extends the meaning of (
+         also 0 or 1 quantifier
+         also quantifier minimizer
+  *      0 or more quantifier
+  +      1 or more quantifier
+         also "possessive quantifier"
+  {      start min/max quantifier
+.sp
+Part of a pattern that is in square brackets is called a "character class". In
+a character class the only metacharacters are:
+.sp
+  \e      general escape character
+  ^      negate the class, but only if the first character
+  -      indicates character range
+.\" JOIN
+  [      POSIX character class (only if followed by POSIX
+           syntax)
+  ]      terminates the character class
+.sp
+The following sections describe the use of each of the metacharacters.
+.
+.
+.SH BACKSLASH
+.rs
+.sp
+The backslash character has several uses. Firstly, if it is followed by a
+character that is not a number or a letter, it takes away any special meaning
+that character may have. This use of backslash as an escape character applies
+both inside and outside character classes.
+.P
+For example, if you want to match a * character, you write \e* in the pattern.
+This escaping action applies whether or not the following character would
+otherwise be interpreted as a metacharacter, so it is always safe to precede a
+non-alphanumeric with backslash to specify that it stands for itself. In
+particular, if you want to match a backslash, you write \e\e.
+.P
+In a UTF mode, only ASCII numbers and letters have any special meaning after a
+backslash. All other characters (in particular, those whose codepoints are
+greater than 127) are treated as literals.
+.P
+If a pattern is compiled with the PCRE_EXTENDED option, white space in the
+pattern (other than in a character class) and characters between a # outside
+a character class and the next newline are ignored. An escaping backslash can
+be used to include a white space or # character as part of the pattern.
+.P
+If you want to remove the special meaning from a sequence of characters, you
+can do so by putting them between \eQ and \eE. This is different from Perl in
+that $ and @ are handled as literals in \eQ...\eE sequences in PCRE, whereas in
+Perl, $ and @ cause variable interpolation. Note the following examples:
+.sp
+  Pattern            PCRE matches   Perl matches
+.sp
+.\" JOIN
+  \eQabc$xyz\eE        abc$xyz        abc followed by the
+                                      contents of $xyz
+  \eQabc\e$xyz\eE       abc\e$xyz       abc\e$xyz
+  \eQabc\eE\e$\eQxyz\eE   abc$xyz        abc$xyz
+.sp
+The \eQ...\eE sequence is recognized both inside and outside character classes.
+An isolated \eE that is not preceded by \eQ is ignored. If \eQ is not followed
+by \eE later in the pattern, the literal interpretation continues to the end of
+the pattern (that is, \eE is assumed at the end). If the isolated \eQ is inside
+a character class, this causes an error, because the character class is not
+terminated.
+.
+.
+.\" HTML <a name="digitsafterbackslash"></a>
+.SS "Non-printing characters"
+.rs
+.sp
+A second use of backslash provides a way of encoding non-printing characters
+in patterns in a visible manner. There is no restriction on the appearance of
+non-printing characters, apart from the binary zero that terminates a pattern,
+but when a pattern is being prepared by text editing, it is often easier to use
+one of the following escape sequences than the binary character it represents:
+.sp
+  \ea        alarm, that is, the BEL character (hex 07)
+  \ecx       "control-x", where x is any ASCII character
+  \ee        escape (hex 1B)
+  \ef        form feed (hex 0C)
+  \en        linefeed (hex 0A)
+  \er        carriage return (hex 0D)
+  \et        tab (hex 09)
+  \eddd      character with octal code ddd, or back reference
+  \exhh      character with hex code hh
+  \ex{hhh..} character with hex code hhh.. (non-JavaScript mode)
+  \euhhhh    character with hex code hhhh (JavaScript mode only)
+.sp
+The precise effect of \ecx on ASCII characters is as follows: if x is a lower
+case letter, it is converted to upper case. Then bit 6 of the character (hex
+40) is inverted. Thus \ecA to \ecZ become hex 01 to hex 1A (A is 41, Z is 5A),
+but \ec{ becomes hex 3B ({ is 7B), and \ec; becomes hex 7B (; is 3B). If the
+data item (byte or 16-bit value) following \ec has a value greater than 127, a
+compile-time error occurs. This locks out non-ASCII characters in all modes.
+.P
+The \ec facility was designed for use with ASCII characters, but with the
+extension to Unicode it is even less useful than it once was. It is, however,
+recognized when PCRE is compiled in EBCDIC mode, where data items are always
+bytes. In this mode, all values are valid after \ec. If the next character is a
+lower case letter, it is converted to upper case. Then the 0xc0 bits of the
+byte are inverted. Thus \ecA becomes hex 01, as in ASCII (A is C1), but because
+the EBCDIC letters are disjoint, \ecZ becomes hex 29 (Z is E9), and other
+characters also generate different values.
+.P
+By default, after \ex, from zero to two hexadecimal digits are read (letters
+can be in upper or lower case). Any number of hexadecimal digits may appear
+between \ex{ and }, but the character code is constrained as follows:
+.sp
+  8-bit non-UTF mode    less than 0x100
+  8-bit UTF-8 mode      less than 0x10ffff and a valid codepoint
+  16-bit non-UTF mode   less than 0x10000
+  16-bit UTF-16 mode    less than 0x10ffff and a valid codepoint
+  32-bit non-UTF mode   less than 0x80000000
+  32-bit UTF-32 mode    less than 0x10ffff and a valid codepoint
+.sp
+Invalid Unicode codepoints are the range 0xd800 to 0xdfff (the so-called
+"surrogate" codepoints), and 0xffef.
+.P
+If characters other than hexadecimal digits appear between \ex{ and }, or if
+there is no terminating }, this form of escape is not recognized. Instead, the
+initial \ex will be interpreted as a basic hexadecimal escape, with no
+following digits, giving a character whose value is zero.
+.P
+If the PCRE_JAVASCRIPT_COMPAT option is set, the interpretation of \ex is
+as just described only when it is followed by two hexadecimal digits.
+Otherwise, it matches a literal "x" character. In JavaScript mode, support for
+code points greater than 256 is provided by \eu, which must be followed by
+four hexadecimal digits; otherwise it matches a literal "u" character.
+Character codes specified by \eu in JavaScript mode are constrained in the same
+was as those specified by \ex in non-JavaScript mode.
+.P
+Characters whose value is less than 256 can be defined by either of the two
+syntaxes for \ex (or by \eu in JavaScript mode). There is no difference in the
+way they are handled. For example, \exdc is exactly the same as \ex{dc} (or
+\eu00dc in JavaScript mode).
+.P
+After \e0 up to two further octal digits are read. If there are fewer than two
+digits, just those that are present are used. Thus the sequence \e0\ex\e07
+specifies two binary zeros followed by a BEL character (code value 7). Make
+sure you supply two digits after the initial zero if the pattern character that
+follows is itself an octal digit.
+.P
+The handling of a backslash followed by a digit other than 0 is complicated.
+Outside a character class, PCRE reads it and any following digits as a decimal
+number. If the number is less than 10, or if there have been at least that many
+previous capturing left parentheses in the expression, the entire sequence is
+taken as a \fIback reference\fP. A description of how this works is given
+.\" HTML <a href="#backreferences">
+.\" </a>
+later,
+.\"
+following the discussion of
+.\" HTML <a href="#subpattern">
+.\" </a>
+parenthesized subpatterns.
+.\"
+.P
+Inside a character class, or if the decimal number is greater than 9 and there
+have not been that many capturing subpatterns, PCRE re-reads up to three octal
+digits following the backslash, and uses them to generate a data character. Any
+subsequent digits stand for themselves. The value of the character is
+constrained in the same way as characters specified in hexadecimal.
+For example:
+.sp
+  \e040   is another way of writing an ASCII space
+.\" JOIN
+  \e40    is the same, provided there are fewer than 40
+            previous capturing subpatterns
+  \e7     is always a back reference
+.\" JOIN
+  \e11    might be a back reference, or another way of
+            writing a tab
+  \e011   is always a tab
+  \e0113  is a tab followed by the character "3"
+.\" JOIN
+  \e113   might be a back reference, otherwise the
+            character with octal code 113
+.\" JOIN
+  \e377   might be a back reference, otherwise
+            the value 255 (decimal)
+.\" JOIN
+  \e81    is either a back reference, or a binary zero
+            followed by the two characters "8" and "1"
+.sp
+Note that octal values of 100 or greater must not be introduced by a leading
+zero, because no more than three octal digits are ever read.
+.P
+All the sequences that define a single character value can be used both inside
+and outside character classes. In addition, inside a character class, \eb is
+interpreted as the backspace character (hex 08).
+.P
+\eN is not allowed in a character class. \eB, \eR, and \eX are not special
+inside a character class. Like other unrecognized escape sequences, they are
+treated as the literal characters "B", "R", and "X" by default, but cause an
+error if the PCRE_EXTRA option is set. Outside a character class, these
+sequences have different meanings.
+.
+.
+.SS "Unsupported escape sequences"
+.rs
+.sp
+In Perl, the sequences \el, \eL, \eu, and \eU are recognized by its string
+handler and used to modify the case of following characters. By default, PCRE
+does not support these escape sequences. However, if the PCRE_JAVASCRIPT_COMPAT
+option is set, \eU matches a "U" character, and \eu can be used to define a
+character by code point, as described in the previous section.
+.
+.
+.SS "Absolute and relative back references"
+.rs
+.sp
+The sequence \eg followed by an unsigned or a negative number, optionally
+enclosed in braces, is an absolute or relative back reference. A named back
+reference can be coded as \eg{name}. Back references are discussed
+.\" HTML <a href="#backreferences">
+.\" </a>
+later,
+.\"
+following the discussion of
+.\" HTML <a href="#subpattern">
+.\" </a>
+parenthesized subpatterns.
+.\"
+.
+.
+.SS "Absolute and relative subroutine calls"
+.rs
+.sp
+For compatibility with Oniguruma, the non-Perl syntax \eg followed by a name or
+a number enclosed either in angle brackets or single quotes, is an alternative
+syntax for referencing a subpattern as a "subroutine". Details are discussed
+.\" HTML <a href="#onigurumasubroutines">
+.\" </a>
+later.
+.\"
+Note that \eg{...} (Perl syntax) and \eg<...> (Oniguruma syntax) are \fInot\fP
+synonymous. The former is a back reference; the latter is a
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+subroutine
+.\"
+call.
+.
+.
+.\" HTML <a name="genericchartypes"></a>
+.SS "Generic character types"
+.rs
+.sp
+Another use of backslash is for specifying generic character types:
+.sp
+  \ed     any decimal digit
+  \eD     any character that is not a decimal digit
+  \eh     any horizontal white space character
+  \eH     any character that is not a horizontal white space character
+  \es     any white space character
+  \eS     any character that is not a white space character
+  \ev     any vertical white space character
+  \eV     any character that is not a vertical white space character
+  \ew     any "word" character
+  \eW     any "non-word" character
+.sp
+There is also the single sequence \eN, which matches a non-newline character.
+This is the same as
+.\" HTML <a href="#fullstopdot">
+.\" </a>
+the "." metacharacter
+.\"
+when PCRE_DOTALL is not set. Perl also uses \eN to match characters by name;
+PCRE does not support this.
+.P
+Each pair of lower and upper case escape sequences partitions the complete set
+of characters into two disjoint sets. Any given character matches one, and only
+one, of each pair. The sequences can appear both inside and outside character
+classes. They each match one character of the appropriate type. If the current
+matching point is at the end of the subject string, all of them fail, because
+there is no character to match.
+.P
+For compatibility with Perl, \es does not match the VT character (code 11).
+This makes it different from the the POSIX "space" class. The \es characters
+are HT (9), LF (10), FF (12), CR (13), and space (32). If "use locale;" is
+included in a Perl script, \es may match the VT character. In PCRE, it never
+does.
+.P
+A "word" character is an underscore or any character that is a letter or digit.
+By default, the definition of letters and digits is controlled by PCRE's
+low-valued character tables, and may vary if locale-specific matching is taking
+place (see
+.\" HTML <a href="pcreapi.html#localesupport">
+.\" </a>
+"Locale support"
+.\"
+in the
+.\" HREF
+\fBpcreapi\fP
+.\"
+page). For example, in a French locale such as "fr_FR" in Unix-like systems,
+or "french" in Windows, some character codes greater than 128 are used for
+accented letters, and these are then matched by \ew. The use of locales with
+Unicode is discouraged.
+.P
+By default, in a UTF mode, characters with values greater than 128 never match
+\ed, \es, or \ew, and always match \eD, \eS, and \eW. These sequences retain
+their original meanings from before UTF support was available, mainly for
+efficiency reasons. However, if PCRE is compiled with Unicode property support,
+and the PCRE_UCP option is set, the behaviour is changed so that Unicode
+properties are used to determine character types, as follows:
+.sp
+  \ed  any character that \ep{Nd} matches (decimal digit)
+  \es  any character that \ep{Z} matches, plus HT, LF, FF, CR
+  \ew  any character that \ep{L} or \ep{N} matches, plus underscore
+.sp
+The upper case escapes match the inverse sets of characters. Note that \ed
+matches only decimal digits, whereas \ew matches any Unicode digit, as well as
+any Unicode letter, and underscore. Note also that PCRE_UCP affects \eb, and
+\eB because they are defined in terms of \ew and \eW. Matching these sequences
+is noticeably slower when PCRE_UCP is set.
+.P
+The sequences \eh, \eH, \ev, and \eV are features that were added to Perl at
+release 5.10. In contrast to the other sequences, which match only ASCII
+characters by default, these always match certain high-valued codepoints,
+whether or not PCRE_UCP is set. The horizontal space characters are:
+.sp
+  U+0009     Horizontal tab (HT)
+  U+0020     Space
+  U+00A0     Non-break space
+  U+1680     Ogham space mark
+  U+180E     Mongolian vowel separator
+  U+2000     En quad
+  U+2001     Em quad
+  U+2002     En space
+  U+2003     Em space
+  U+2004     Three-per-em space
+  U+2005     Four-per-em space
+  U+2006     Six-per-em space
+  U+2007     Figure space
+  U+2008     Punctuation space
+  U+2009     Thin space
+  U+200A     Hair space
+  U+202F     Narrow no-break space
+  U+205F     Medium mathematical space
+  U+3000     Ideographic space
+.sp
+The vertical space characters are:
+.sp
+  U+000A     Linefeed (LF)
+  U+000B     Vertical tab (VT)
+  U+000C     Form feed (FF)
+  U+000D     Carriage return (CR)
+  U+0085     Next line (NEL)
+  U+2028     Line separator
+  U+2029     Paragraph separator
+.sp
+In 8-bit, non-UTF-8 mode, only the characters with codepoints less than 256 are
+relevant.
+.
+.
+.\" HTML <a name="newlineseq"></a>
+.SS "Newline sequences"
+.rs
+.sp
+Outside a character class, by default, the escape sequence \eR matches any
+Unicode newline sequence. In 8-bit non-UTF-8 mode \eR is equivalent to the
+following:
+.sp
+  (?>\er\en|\en|\ex0b|\ef|\er|\ex85)
+.sp
+This is an example of an "atomic group", details of which are given
+.\" HTML <a href="#atomicgroup">
+.\" </a>
+below.
+.\"
+This particular group matches either the two-character sequence CR followed by
+LF, or one of the single characters LF (linefeed, U+000A), VT (vertical tab,
+U+000B), FF (form feed, U+000C), CR (carriage return, U+000D), or NEL (next
+line, U+0085). The two-character sequence is treated as a single unit that
+cannot be split.
+.P
+In other modes, two additional characters whose codepoints are greater than 255
+are added: LS (line separator, U+2028) and PS (paragraph separator, U+2029).
+Unicode character property support is not needed for these characters to be
+recognized.
+.P
+It is possible to restrict \eR to match only CR, LF, or CRLF (instead of the
+complete set of Unicode line endings) by setting the option PCRE_BSR_ANYCRLF
+either at compile time or when the pattern is matched. (BSR is an abbrevation
+for "backslash R".) This can be made the default when PCRE is built; if this is
+the case, the other behaviour can be requested via the PCRE_BSR_UNICODE option.
+It is also possible to specify these settings by starting a pattern string with
+one of the following sequences:
+.sp
+  (*BSR_ANYCRLF)   CR, LF, or CRLF only
+  (*BSR_UNICODE)   any Unicode newline sequence
+.sp
+These override the default and the options given to the compiling function, but
+they can themselves be overridden by options given to a matching function. Note
+that these special settings, which are not Perl-compatible, are recognized only
+at the very start of a pattern, and that they must be in upper case. If more
+than one of them is present, the last one is used. They can be combined with a
+change of newline convention; for example, a pattern can start with:
+.sp
+  (*ANY)(*BSR_ANYCRLF)
+.sp
+They can also be combined with the (*UTF8), (*UTF16), (*UTF32), (*UTF) or
+(*UCP) special sequences. Inside a character class, \eR is treated as an
+unrecognized escape sequence, and so matches the letter "R" by default, but
+causes an error if PCRE_EXTRA is set.
+.
+.
+.\" HTML <a name="uniextseq"></a>
+.SS Unicode character properties
+.rs
+.sp
+When PCRE is built with Unicode character property support, three additional
+escape sequences that match characters with specific properties are available.
+When in 8-bit non-UTF-8 mode, these sequences are of course limited to testing
+characters whose codepoints are less than 256, but they do work in this mode.
+The extra escape sequences are:
+.sp
+  \ep{\fIxx\fP}   a character with the \fIxx\fP property
+  \eP{\fIxx\fP}   a character without the \fIxx\fP property
+  \eX       a Unicode extended grapheme cluster
+.sp
+The property names represented by \fIxx\fP above are limited to the Unicode
+script names, the general category properties, "Any", which matches any
+character (including newline), and some special PCRE properties (described
+in the
+.\" HTML <a href="#extraprops">
+.\" </a>
+next section).
+.\"
+Other Perl properties such as "InMusicalSymbols" are not currently supported by
+PCRE. Note that \eP{Any} does not match any characters, so always causes a
+match failure.
+.P
+Sets of Unicode characters are defined as belonging to certain scripts. A
+character from one of these sets can be matched using a script name. For
+example:
+.sp
+  \ep{Greek}
+  \eP{Han}
+.sp
+Those that are not part of an identified script are lumped together as
+"Common". The current list of scripts is:
+.P
+Arabic,
+Armenian,
+Avestan,
+Balinese,
+Bamum,
+Batak,
+Bengali,
+Bopomofo,
+Brahmi,
+Braille,
+Buginese,
+Buhid,
+Canadian_Aboriginal,
+Carian,
+Chakma,
+Cham,
+Cherokee,
+Common,
+Coptic,
+Cuneiform,
+Cypriot,
+Cyrillic,
+Deseret,
+Devanagari,
+Egyptian_Hieroglyphs,
+Ethiopic,
+Georgian,
+Glagolitic,
+Gothic,
+Greek,
+Gujarati,
+Gurmukhi,
+Han,
+Hangul,
+Hanunoo,
+Hebrew,
+Hiragana,
+Imperial_Aramaic,
+Inherited,
+Inscriptional_Pahlavi,
+Inscriptional_Parthian,
+Javanese,
+Kaithi,
+Kannada,
+Katakana,
+Kayah_Li,
+Kharoshthi,
+Khmer,
+Lao,
+Latin,
+Lepcha,
+Limbu,
+Linear_B,
+Lisu,
+Lycian,
+Lydian,
+Malayalam,
+Mandaic,
+Meetei_Mayek,
+Meroitic_Cursive,
+Meroitic_Hieroglyphs,
+Miao,
+Mongolian,
+Myanmar,
+New_Tai_Lue,
+Nko,
+Ogham,
+Old_Italic,
+Old_Persian,
+Old_South_Arabian,
+Old_Turkic,
+Ol_Chiki,
+Oriya,
+Osmanya,
+Phags_Pa,
+Phoenician,
+Rejang,
+Runic,
+Samaritan,
+Saurashtra,
+Sharada,
+Shavian,
+Sinhala,
+Sora_Sompeng,
+Sundanese,
+Syloti_Nagri,
+Syriac,
+Tagalog,
+Tagbanwa,
+Tai_Le,
+Tai_Tham,
+Tai_Viet,
+Takri,
+Tamil,
+Telugu,
+Thaana,
+Thai,
+Tibetan,
+Tifinagh,
+Ugaritic,
+Vai,
+Yi.
+.P
+Each character has exactly one Unicode general category property, specified by
+a two-letter abbreviation. For compatibility with Perl, negation can be
+specified by including a circumflex between the opening brace and the property
+name. For example, \ep{^Lu} is the same as \eP{Lu}.
+.P
+If only one letter is specified with \ep or \eP, it includes all the general
+category properties that start with that letter. In this case, in the absence
+of negation, the curly brackets in the escape sequence are optional; these two
+examples have the same effect:
+.sp
+  \ep{L}
+  \epL
+.sp
+The following general category property codes are supported:
+.sp
+  C     Other
+  Cc    Control
+  Cf    Format
+  Cn    Unassigned
+  Co    Private use
+  Cs    Surrogate
+.sp
+  L     Letter
+  Ll    Lower case letter
+  Lm    Modifier letter
+  Lo    Other letter
+  Lt    Title case letter
+  Lu    Upper case letter
+.sp
+  M     Mark
+  Mc    Spacing mark
+  Me    Enclosing mark
+  Mn    Non-spacing mark
+.sp
+  N     Number
+  Nd    Decimal number
+  Nl    Letter number
+  No    Other number
+.sp
+  P     Punctuation
+  Pc    Connector punctuation
+  Pd    Dash punctuation
+  Pe    Close punctuation
+  Pf    Final punctuation
+  Pi    Initial punctuation
+  Po    Other punctuation
+  Ps    Open punctuation
+.sp
+  S     Symbol
+  Sc    Currency symbol
+  Sk    Modifier symbol
+  Sm    Mathematical symbol
+  So    Other symbol
+.sp
+  Z     Separator
+  Zl    Line separator
+  Zp    Paragraph separator
+  Zs    Space separator
+.sp
+The special property L& is also supported: it matches a character that has
+the Lu, Ll, or Lt property, in other words, a letter that is not classified as
+a modifier or "other".
+.P
+The Cs (Surrogate) property applies only to characters in the range U+D800 to
+U+DFFF. Such characters are not valid in Unicode strings and so
+cannot be tested by PCRE, unless UTF validity checking has been turned off
+(see the discussion of PCRE_NO_UTF8_CHECK, PCRE_NO_UTF16_CHECK and
+PCRE_NO_UTF32_CHECK in the
+.\" HREF
+\fBpcreapi\fP
+.\"
+page). Perl does not support the Cs property.
+.P
+The long synonyms for property names that Perl supports (such as \ep{Letter})
+are not supported by PCRE, nor is it permitted to prefix any of these
+properties with "Is".
+.P
+No character that is in the Unicode table has the Cn (unassigned) property.
+Instead, this property is assumed for any code point that is not in the
+Unicode table.
+.P
+Specifying caseless matching does not affect these escape sequences. For
+example, \ep{Lu} always matches only upper case letters.
+.P
+Matching characters by Unicode property is not fast, because PCRE has to do a
+multistage table lookup in order to find a character's property. That is why
+the traditional escape sequences such as \ed and \ew do not use Unicode
+properties in PCRE by default, though you can make them do so by setting the
+PCRE_UCP option or by starting the pattern with (*UCP).
+.
+.
+.SS Extended grapheme clusters
+.rs
+.sp
+The \eX escape matches any number of Unicode characters that form an "extended
+grapheme cluster", and treats the sequence as an atomic group
+.\" HTML <a href="#atomicgroup">
+.\" </a>
+(see below).
+.\"
+Up to and including release 8.31, PCRE matched an earlier, simpler definition
+that was equivalent to
+.sp
+  (?>\ePM\epM*)
+.sp
+That is, it matched a character without the "mark" property, followed by zero
+or more characters with the "mark" property. Characters with the "mark"
+property are typically non-spacing accents that affect the preceding character.
+.P
+This simple definition was extended in Unicode to include more complicated
+kinds of composite character by giving each character a grapheme breaking
+property, and creating rules that use these properties to define the boundaries
+of extended grapheme clusters. In releases of PCRE later than 8.31, \eX matches
+one of these clusters.
+.P
+\eX always matches at least one character. Then it decides whether to add
+additional characters according to the following rules for ending a cluster:
+.P
+1. End at the end of the subject string.
+.P
+2. Do not end between CR and LF; otherwise end after any control character.
+.P
+3. Do not break Hangul (a Korean script) syllable sequences. Hangul characters
+are of five types: L, V, T, LV, and LVT. An L character may be followed by an
+L, V, LV, or LVT character; an LV or V character may be followed by a V or T
+character; an LVT or T character may be follwed only by a T character.
+.P
+4. Do not end before extending characters or spacing marks. Characters with
+the "mark" property always have the "extend" grapheme breaking property.
+.P
+5. Do not end after prepend characters.
+.P
+6. Otherwise, end the cluster.
+.
+.
+.\" HTML <a name="extraprops"></a>
+.SS PCRE's additional properties
+.rs
+.sp
+As well as the standard Unicode properties described above, PCRE supports four
+more that make it possible to convert traditional escape sequences such as \ew
+and \es and POSIX character classes to use Unicode properties. PCRE uses these
+non-standard, non-Perl properties internally when PCRE_UCP is set. They are:
+.sp
+  Xan   Any alphanumeric character
+  Xps   Any POSIX space character
+  Xsp   Any Perl space character
+  Xwd   Any Perl "word" character
+.sp
+Xan matches characters that have either the L (letter) or the N (number)
+property. Xps matches the characters tab, linefeed, vertical tab, form feed, or
+carriage return, and any other character that has the Z (separator) property.
+Xsp is the same as Xps, except that vertical tab is excluded. Xwd matches the
+same characters as Xan, plus underscore.
+.
+.
+.\" HTML <a name="resetmatchstart"></a>
+.SS "Resetting the match start"
+.rs
+.sp
+The escape sequence \eK causes any previously matched characters not to be
+included in the final matched sequence. For example, the pattern:
+.sp
+  foo\eKbar
+.sp
+matches "foobar", but reports that it has matched "bar". This feature is
+similar to a lookbehind assertion
+.\" HTML <a href="#lookbehind">
+.\" </a>
+(described below).
+.\"
+However, in this case, the part of the subject before the real match does not
+have to be of fixed length, as lookbehind assertions do. The use of \eK does
+not interfere with the setting of
+.\" HTML <a href="#subpattern">
+.\" </a>
+captured substrings.
+.\"
+For example, when the pattern
+.sp
+  (foo)\eKbar
+.sp
+matches "foobar", the first substring is still set to "foo".
+.P
+Perl documents that the use of \eK within assertions is "not well defined". In
+PCRE, \eK is acted upon when it occurs inside positive assertions, but is
+ignored in negative assertions.
+.
+.
+.\" HTML <a name="smallassertions"></a>
+.SS "Simple assertions"
+.rs
+.sp
+The final use of backslash is for certain simple assertions. An assertion
+specifies a condition that has to be met at a particular point in a match,
+without consuming any characters from the subject string. The use of
+subpatterns for more complicated assertions is described
+.\" HTML <a href="#bigassertions">
+.\" </a>
+below.
+.\"
+The backslashed assertions are:
+.sp
+  \eb     matches at a word boundary
+  \eB     matches when not at a word boundary
+  \eA     matches at the start of the subject
+  \eZ     matches at the end of the subject
+          also matches before a newline at the end of the subject
+  \ez     matches only at the end of the subject
+  \eG     matches at the first matching position in the subject
+.sp
+Inside a character class, \eb has a different meaning; it matches the backspace
+character. If any other of these assertions appears in a character class, by
+default it matches the corresponding literal character (for example, \eB
+matches the letter B). However, if the PCRE_EXTRA option is set, an "invalid
+escape sequence" error is generated instead.
+.P
+A word boundary is a position in the subject string where the current character
+and the previous character do not both match \ew or \eW (i.e. one matches
+\ew and the other matches \eW), or the start or end of the string if the
+first or last character matches \ew, respectively. In a UTF mode, the meanings
+of \ew and \eW can be changed by setting the PCRE_UCP option. When this is
+done, it also affects \eb and \eB. Neither PCRE nor Perl has a separate "start
+of word" or "end of word" metasequence. However, whatever follows \eb normally
+determines which it is. For example, the fragment \eba matches "a" at the start
+of a word.
+.P
+The \eA, \eZ, and \ez assertions differ from the traditional circumflex and
+dollar (described in the next section) in that they only ever match at the very
+start and end of the subject string, whatever options are set. Thus, they are
+independent of multiline mode. These three assertions are not affected by the
+PCRE_NOTBOL or PCRE_NOTEOL options, which affect only the behaviour of the
+circumflex and dollar metacharacters. However, if the \fIstartoffset\fP
+argument of \fBpcre_exec()\fP is non-zero, indicating that matching is to start
+at a point other than the beginning of the subject, \eA can never match. The
+difference between \eZ and \ez is that \eZ matches before a newline at the end
+of the string as well as at the very end, whereas \ez matches only at the end.
+.P
+The \eG assertion is true only when the current matching position is at the
+start point of the match, as specified by the \fIstartoffset\fP argument of
+\fBpcre_exec()\fP. It differs from \eA when the value of \fIstartoffset\fP is
+non-zero. By calling \fBpcre_exec()\fP multiple times with appropriate
+arguments, you can mimic Perl's /g option, and it is in this kind of
+implementation where \eG can be useful.
+.P
+Note, however, that PCRE's interpretation of \eG, as the start of the current
+match, is subtly different from Perl's, which defines it as the end of the
+previous match. In Perl, these can be different when the previously matched
+string was empty. Because PCRE does just one match at a time, it cannot
+reproduce this behaviour.
+.P
+If all the alternatives of a pattern begin with \eG, the expression is anchored
+to the starting match position, and the "anchored" flag is set in the compiled
+regular expression.
+.
+.
+.SH "CIRCUMFLEX AND DOLLAR"
+.rs
+.sp
+The circumflex and dollar metacharacters are zero-width assertions. That is,
+they test for a particular condition being true without consuming any
+characters from the subject string.
+.P
+Outside a character class, in the default matching mode, the circumflex
+character is an assertion that is true only if the current matching point is at
+the start of the subject string. If the \fIstartoffset\fP argument of
+\fBpcre_exec()\fP is non-zero, circumflex can never match if the PCRE_MULTILINE
+option is unset. Inside a character class, circumflex has an entirely different
+meaning
+.\" HTML <a href="#characterclass">
+.\" </a>
+(see below).
+.\"
+.P
+Circumflex need not be the first character of the pattern if a number of
+alternatives are involved, but it should be the first thing in each alternative
+in which it appears if the pattern is ever to match that branch. If all
+possible alternatives start with a circumflex, that is, if the pattern is
+constrained to match only at the start of the subject, it is said to be an
+"anchored" pattern. (There are also other constructs that can cause a pattern
+to be anchored.)
+.P
+The dollar character is an assertion that is true only if the current matching
+point is at the end of the subject string, or immediately before a newline at
+the end of the string (by default). Note, however, that it does not actually
+match the newline. Dollar need not be the last character of the pattern if a
+number of alternatives are involved, but it should be the last item in any
+branch in which it appears. Dollar has no special meaning in a character class.
+.P
+The meaning of dollar can be changed so that it matches only at the very end of
+the string, by setting the PCRE_DOLLAR_ENDONLY option at compile time. This
+does not affect the \eZ assertion.
+.P
+The meanings of the circumflex and dollar characters are changed if the
+PCRE_MULTILINE option is set. When this is the case, a circumflex matches
+immediately after internal newlines as well as at the start of the subject
+string. It does not match after a newline that ends the string. A dollar
+matches before any newlines in the string, as well as at the very end, when
+PCRE_MULTILINE is set. When newline is specified as the two-character
+sequence CRLF, isolated CR and LF characters do not indicate newlines.
+.P
+For example, the pattern /^abc$/ matches the subject string "def\enabc" (where
+\en represents a newline) in multiline mode, but not otherwise. Consequently,
+patterns that are anchored in single line mode because all branches start with
+^ are not anchored in multiline mode, and a match for circumflex is possible
+when the \fIstartoffset\fP argument of \fBpcre_exec()\fP is non-zero. The
+PCRE_DOLLAR_ENDONLY option is ignored if PCRE_MULTILINE is set.
+.P
+Note that the sequences \eA, \eZ, and \ez can be used to match the start and
+end of the subject in both modes, and if all branches of a pattern start with
+\eA it is always anchored, whether or not PCRE_MULTILINE is set.
+.
+.
+.\" HTML <a name="fullstopdot"></a>
+.SH "FULL STOP (PERIOD, DOT) AND \eN"
+.rs
+.sp
+Outside a character class, a dot in the pattern matches any one character in
+the subject string except (by default) a character that signifies the end of a
+line.
+.P
+When a line ending is defined as a single character, dot never matches that
+character; when the two-character sequence CRLF is used, dot does not match CR
+if it is immediately followed by LF, but otherwise it matches all characters
+(including isolated CRs and LFs). When any Unicode line endings are being
+recognized, dot does not match CR or LF or any of the other line ending
+characters.
+.P
+The behaviour of dot with regard to newlines can be changed. If the PCRE_DOTALL
+option is set, a dot matches any one character, without exception. If the
+two-character sequence CRLF is present in the subject string, it takes two dots
+to match it.
+.P
+The handling of dot is entirely independent of the handling of circumflex and
+dollar, the only relationship being that they both involve newlines. Dot has no
+special meaning in a character class.
+.P
+The escape sequence \eN behaves like a dot, except that it is not affected by
+the PCRE_DOTALL option. In other words, it matches any character except one
+that signifies the end of a line. Perl also uses \eN to match characters by
+name; PCRE does not support this.
+.
+.
+.SH "MATCHING A SINGLE DATA UNIT"
+.rs
+.sp
+Outside a character class, the escape sequence \eC matches any one data unit,
+whether or not a UTF mode is set. In the 8-bit library, one data unit is one
+byte; in the 16-bit library it is a 16-bit unit; in the 32-bit library it is
+a 32-bit unit. Unlike a dot, \eC always
+matches line-ending characters. The feature is provided in Perl in order to
+match individual bytes in UTF-8 mode, but it is unclear how it can usefully be
+used. Because \eC breaks up characters into individual data units, matching one
+unit with \eC in a UTF mode means that the rest of the string may start with a
+malformed UTF character. This has undefined results, because PCRE assumes that
+it is dealing with valid UTF strings (and by default it checks this at the
+start of processing unless the PCRE_NO_UTF8_CHECK, PCRE_NO_UTF16_CHECK or
+PCRE_NO_UTF32_CHECK option is used).
+.P
+PCRE does not allow \eC to appear in lookbehind assertions
+.\" HTML <a href="#lookbehind">
+.\" </a>
+(described below)
+.\"
+in a UTF mode, because this would make it impossible to calculate the length of
+the lookbehind.
+.P
+In general, the \eC escape sequence is best avoided. However, one
+way of using it that avoids the problem of malformed UTF characters is to use a
+lookahead to check the length of the next character, as in this pattern, which
+could be used with a UTF-8 string (ignore white space and line breaks):
+.sp
+  (?| (?=[\ex00-\ex7f])(\eC) |
+      (?=[\ex80-\ex{7ff}])(\eC)(\eC) |
+      (?=[\ex{800}-\ex{ffff}])(\eC)(\eC)(\eC) |
+      (?=[\ex{10000}-\ex{1fffff}])(\eC)(\eC)(\eC)(\eC))
+.sp
+A group that starts with (?| resets the capturing parentheses numbers in each
+alternative (see
+.\" HTML <a href="#dupsubpatternnumber">
+.\" </a>
+"Duplicate Subpattern Numbers"
+.\"
+below). The assertions at the start of each branch check the next UTF-8
+character for values whose encoding uses 1, 2, 3, or 4 bytes, respectively. The
+character's individual bytes are then captured by the appropriate number of
+groups.
+.
+.
+.\" HTML <a name="characterclass"></a>
+.SH "SQUARE BRACKETS AND CHARACTER CLASSES"
+.rs
+.sp
+An opening square bracket introduces a character class, terminated by a closing
+square bracket. A closing square bracket on its own is not special by default.
+However, if the PCRE_JAVASCRIPT_COMPAT option is set, a lone closing square
+bracket causes a compile-time error. If a closing square bracket is required as
+a member of the class, it should be the first data character in the class
+(after an initial circumflex, if present) or escaped with a backslash.
+.P
+A character class matches a single character in the subject. In a UTF mode, the
+character may be more than one data unit long. A matched character must be in
+the set of characters defined by the class, unless the first character in the
+class definition is a circumflex, in which case the subject character must not
+be in the set defined by the class. If a circumflex is actually required as a
+member of the class, ensure it is not the first character, or escape it with a
+backslash.
+.P
+For example, the character class [aeiou] matches any lower case vowel, while
+[^aeiou] matches any character that is not a lower case vowel. Note that a
+circumflex is just a convenient notation for specifying the characters that
+are in the class by enumerating those that are not. A class that starts with a
+circumflex is not an assertion; it still consumes a character from the subject
+string, and therefore it fails if the current pointer is at the end of the
+string.
+.P
+In UTF-8 (UTF-16, UTF-32) mode, characters with values greater than 255 (0xffff)
+can be included in a class as a literal string of data units, or by using the
+\ex{ escaping mechanism.
+.P
+When caseless matching is set, any letters in a class represent both their
+upper case and lower case versions, so for example, a caseless [aeiou] matches
+"A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a
+caseful version would. In a UTF mode, PCRE always understands the concept of
+case for characters whose values are less than 128, so caseless matching is
+always possible. For characters with higher values, the concept of case is
+supported if PCRE is compiled with Unicode property support, but not otherwise.
+If you want to use caseless matching in a UTF mode for characters 128 and
+above, you must ensure that PCRE is compiled with Unicode property support as
+well as with UTF support.
+.P
+Characters that might indicate line breaks are never treated in any special way
+when matching character classes, whatever line-ending sequence is in use, and
+whatever setting of the PCRE_DOTALL and PCRE_MULTILINE options is used. A class
+such as [^a] always matches one of these characters.
+.P
+The minus (hyphen) character can be used to specify a range of characters in a
+character class. For example, [d-m] matches any letter between d and m,
+inclusive. If a minus character is required in a class, it must be escaped with
+a backslash or appear in a position where it cannot be interpreted as
+indicating a range, typically as the first or last character in the class.
+.P
+It is not possible to have the literal character "]" as the end character of a
+range. A pattern such as [W-]46] is interpreted as a class of two characters
+("W" and "-") followed by a literal string "46]", so it would match "W46]" or
+"-46]". However, if the "]" is escaped with a backslash it is interpreted as
+the end of range, so [W-\e]46] is interpreted as a class containing a range
+followed by two other characters. The octal or hexadecimal representation of
+"]" can also be used to end a range.
+.P
+Ranges operate in the collating sequence of character values. They can also be
+used for characters specified numerically, for example [\e000-\e037]. Ranges
+can include any characters that are valid for the current mode.
+.P
+If a range that includes letters is used when caseless matching is set, it
+matches the letters in either case. For example, [W-c] is equivalent to
+[][\e\e^_`wxyzabc], matched caselessly, and in a non-UTF mode, if character
+tables for a French locale are in use, [\exc8-\excb] matches accented E
+characters in both cases. In UTF modes, PCRE supports the concept of case for
+characters with values greater than 128 only when it is compiled with Unicode
+property support.
+.P
+The character escape sequences \ed, \eD, \eh, \eH, \ep, \eP, \es, \eS, \ev,
+\eV, \ew, and \eW may appear in a character class, and add the characters that
+they match to the class. For example, [\edABCDEF] matches any hexadecimal
+digit. In UTF modes, the PCRE_UCP option affects the meanings of \ed, \es, \ew
+and their upper case partners, just as it does when they appear outside a
+character class, as described in the section entitled
+.\" HTML <a href="#genericchartypes">
+.\" </a>
+"Generic character types"
+.\"
+above. The escape sequence \eb has a different meaning inside a character
+class; it matches the backspace character. The sequences \eB, \eN, \eR, and \eX
+are not special inside a character class. Like any other unrecognized escape
+sequences, they are treated as the literal characters "B", "N", "R", and "X" by
+default, but cause an error if the PCRE_EXTRA option is set.
+.P
+A circumflex can conveniently be used with the upper case character types to
+specify a more restricted set of characters than the matching lower case type.
+For example, the class [^\eW_] matches any letter or digit, but not underscore,
+whereas [\ew] includes underscore. A positive character class should be read as
+"something OR something OR ..." and a negative class as "NOT something AND NOT
+something AND NOT ...".
+.P
+The only metacharacters that are recognized in character classes are backslash,
+hyphen (only where it can be interpreted as specifying a range), circumflex
+(only at the start), opening square bracket (only when it can be interpreted as
+introducing a POSIX class name - see the next section), and the terminating
+closing square bracket. However, escaping other non-alphanumeric characters
+does no harm.
+.
+.
+.SH "POSIX CHARACTER CLASSES"
+.rs
+.sp
+Perl supports the POSIX notation for character classes. This uses names
+enclosed by [: and :] within the enclosing square brackets. PCRE also supports
+this notation. For example,
+.sp
+  [01[:alpha:]%]
+.sp
+matches "0", "1", any alphabetic character, or "%". The supported class names
+are:
+.sp
+  alnum    letters and digits
+  alpha    letters
+  ascii    character codes 0 - 127
+  blank    space or tab only
+  cntrl    control characters
+  digit    decimal digits (same as \ed)
+  graph    printing characters, excluding space
+  lower    lower case letters
+  print    printing characters, including space
+  punct    printing characters, excluding letters and digits and space
+  space    white space (not quite the same as \es)
+  upper    upper case letters
+  word     "word" characters (same as \ew)
+  xdigit   hexadecimal digits
+.sp
+The "space" characters are HT (9), LF (10), VT (11), FF (12), CR (13), and
+space (32). Notice that this list includes the VT character (code 11). This
+makes "space" different to \es, which does not include VT (for Perl
+compatibility).
+.P
+The name "word" is a Perl extension, and "blank" is a GNU extension from Perl
+5.8. Another Perl extension is negation, which is indicated by a ^ character
+after the colon. For example,
+.sp
+  [12[:^digit:]]
+.sp
+matches "1", "2", or any non-digit. PCRE (and Perl) also recognize the POSIX
+syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not
+supported, and an error is given if they are encountered.
+.P
+By default, in UTF modes, characters with values greater than 128 do not match
+any of the POSIX character classes. However, if the PCRE_UCP option is passed
+to \fBpcre_compile()\fP, some of the classes are changed so that Unicode
+character properties are used. This is achieved by replacing the POSIX classes
+by other sequences, as follows:
+.sp
+  [:alnum:]  becomes  \ep{Xan}
+  [:alpha:]  becomes  \ep{L}
+  [:blank:]  becomes  \eh
+  [:digit:]  becomes  \ep{Nd}
+  [:lower:]  becomes  \ep{Ll}
+  [:space:]  becomes  \ep{Xps}
+  [:upper:]  becomes  \ep{Lu}
+  [:word:]   becomes  \ep{Xwd}
+.sp
+Negated versions, such as [:^alpha:] use \eP instead of \ep. The other POSIX
+classes are unchanged, and match only characters with code points less than
+128.
+.
+.
+.SH "VERTICAL BAR"
+.rs
+.sp
+Vertical bar characters are used to separate alternative patterns. For example,
+the pattern
+.sp
+  gilbert|sullivan
+.sp
+matches either "gilbert" or "sullivan". Any number of alternatives may appear,
+and an empty alternative is permitted (matching the empty string). The matching
+process tries each alternative in turn, from left to right, and the first one
+that succeeds is used. If the alternatives are within a subpattern
+.\" HTML <a href="#subpattern">
+.\" </a>
+(defined below),
+.\"
+"succeeds" means matching the rest of the main pattern as well as the
+alternative in the subpattern.
+.
+.
+.SH "INTERNAL OPTION SETTING"
+.rs
+.sp
+The settings of the PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and
+PCRE_EXTENDED options (which are Perl-compatible) can be changed from within
+the pattern by a sequence of Perl option letters enclosed between "(?" and ")".
+The option letters are
+.sp
+  i  for PCRE_CASELESS
+  m  for PCRE_MULTILINE
+  s  for PCRE_DOTALL
+  x  for PCRE_EXTENDED
+.sp
+For example, (?im) sets caseless, multiline matching. It is also possible to
+unset these options by preceding the letter with a hyphen, and a combined
+setting and unsetting such as (?im-sx), which sets PCRE_CASELESS and
+PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED, is also
+permitted. If a letter appears both before and after the hyphen, the option is
+unset.
+.P
+The PCRE-specific options PCRE_DUPNAMES, PCRE_UNGREEDY, and PCRE_EXTRA can be
+changed in the same way as the Perl-compatible options by using the characters
+J, U and X respectively.
+.P
+When one of these option changes occurs at top level (that is, not inside
+subpattern parentheses), the change applies to the remainder of the pattern
+that follows. If the change is placed right at the start of a pattern, PCRE
+extracts it into the global options (and it will therefore show up in data
+extracted by the \fBpcre_fullinfo()\fP function).
+.P
+An option change within a subpattern (see below for a description of
+subpatterns) affects only that part of the subpattern that follows it, so
+.sp
+  (a(?i)b)c
+.sp
+matches abc and aBc and no other strings (assuming PCRE_CASELESS is not used).
+By this means, options can be made to have different settings in different
+parts of the pattern. Any changes made in one alternative do carry on
+into subsequent branches within the same subpattern. For example,
+.sp
+  (a(?i)b|c)
+.sp
+matches "ab", "aB", "c", and "C", even though when matching "C" the first
+branch is abandoned before the option setting. This is because the effects of
+option settings happen at compile time. There would be some very weird
+behaviour otherwise.
+.P
+\fBNote:\fP There are other PCRE-specific options that can be set by the
+application when the compiling or matching functions are called. In some cases
+the pattern can contain special leading sequences such as (*CRLF) to override
+what the application has set or what has been defaulted. Details are given in
+the section entitled
+.\" HTML <a href="#newlineseq">
+.\" </a>
+"Newline sequences"
+.\"
+above. There are also the (*UTF8), (*UTF16),(*UTF32), and (*UCP) leading
+sequences that can be used to set UTF and Unicode property modes; they are
+equivalent to setting the PCRE_UTF8, PCRE_UTF16, PCRE_UTF32 and the PCRE_UCP
+options, respectively. The (*UTF) sequence is a generic version that can be
+used with any of the libraries.
+.
+.
+.\" HTML <a name="subpattern"></a>
+.SH SUBPATTERNS
+.rs
+.sp
+Subpatterns are delimited by parentheses (round brackets), which can be nested.
+Turning part of a pattern into a subpattern does two things:
+.sp
+1. It localizes a set of alternatives. For example, the pattern
+.sp
+  cat(aract|erpillar|)
+.sp
+matches "cataract", "caterpillar", or "cat". Without the parentheses, it would
+match "cataract", "erpillar" or an empty string.
+.sp
+2. It sets up the subpattern as a capturing subpattern. This means that, when
+the whole pattern matches, that portion of the subject string that matched the
+subpattern is passed back to the caller via the \fIovector\fP argument of the
+matching function. (This applies only to the traditional matching functions;
+the DFA matching functions do not support capturing.)
+.P
+Opening parentheses are counted from left to right (starting from 1) to obtain
+numbers for the capturing subpatterns. For example, if the string "the red
+king" is matched against the pattern
+.sp
+  the ((red|white) (king|queen))
+.sp
+the captured substrings are "red king", "red", and "king", and are numbered 1,
+2, and 3, respectively.
+.P
+The fact that plain parentheses fulfil two functions is not always helpful.
+There are often times when a grouping subpattern is required without a
+capturing requirement. If an opening parenthesis is followed by a question mark
+and a colon, the subpattern does not do any capturing, and is not counted when
+computing the number of any subsequent capturing subpatterns. For example, if
+the string "the white queen" is matched against the pattern
+.sp
+  the ((?:red|white) (king|queen))
+.sp
+the captured substrings are "white queen" and "queen", and are numbered 1 and
+2. The maximum number of capturing subpatterns is 65535.
+.P
+As a convenient shorthand, if any option settings are required at the start of
+a non-capturing subpattern, the option letters may appear between the "?" and
+the ":". Thus the two patterns
+.sp
+  (?i:saturday|sunday)
+  (?:(?i)saturday|sunday)
+.sp
+match exactly the same set of strings. Because alternative branches are tried
+from left to right, and options are not reset until the end of the subpattern
+is reached, an option setting in one branch does affect subsequent branches, so
+the above patterns match "SUNDAY" as well as "Saturday".
+.
+.
+.\" HTML <a name="dupsubpatternnumber"></a>
+.SH "DUPLICATE SUBPATTERN NUMBERS"
+.rs
+.sp
+Perl 5.10 introduced a feature whereby each alternative in a subpattern uses
+the same numbers for its capturing parentheses. Such a subpattern starts with
+(?| and is itself a non-capturing subpattern. For example, consider this
+pattern:
+.sp
+  (?|(Sat)ur|(Sun))day
+.sp
+Because the two alternatives are inside a (?| group, both sets of capturing
+parentheses are numbered one. Thus, when the pattern matches, you can look
+at captured substring number one, whichever alternative matched. This construct
+is useful when you want to capture part, but not all, of one of a number of
+alternatives. Inside a (?| group, parentheses are numbered as usual, but the
+number is reset at the start of each branch. The numbers of any capturing
+parentheses that follow the subpattern start after the highest number used in
+any branch. The following example is taken from the Perl documentation. The
+numbers underneath show in which buffer the captured content will be stored.
+.sp
+  # before  ---------------branch-reset----------- after
+  / ( a )  (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x
+  # 1            2         2  3        2     3     4
+.sp
+A back reference to a numbered subpattern uses the most recent value that is
+set for that number by any subpattern. The following pattern matches "abcabc"
+or "defdef":
+.sp
+  /(?|(abc)|(def))\e1/
+.sp
+In contrast, a subroutine call to a numbered subpattern always refers to the
+first one in the pattern with the given number. The following pattern matches
+"abcabc" or "defabc":
+.sp
+  /(?|(abc)|(def))(?1)/
+.sp
+If a
+.\" HTML <a href="#conditions">
+.\" </a>
+condition test
+.\"
+for a subpattern's having matched refers to a non-unique number, the test is
+true if any of the subpatterns of that number have matched.
+.P
+An alternative approach to using this "branch reset" feature is to use
+duplicate named subpatterns, as described in the next section.
+.
+.
+.SH "NAMED SUBPATTERNS"
+.rs
+.sp
+Identifying capturing parentheses by number is simple, but it can be very hard
+to keep track of the numbers in complicated regular expressions. Furthermore,
+if an expression is modified, the numbers may change. To help with this
+difficulty, PCRE supports the naming of subpatterns. This feature was not
+added to Perl until release 5.10. Python had the feature earlier, and PCRE
+introduced it at release 4.0, using the Python syntax. PCRE now supports both
+the Perl and the Python syntax. Perl allows identically numbered subpatterns to
+have different names, but PCRE does not.
+.P
+In PCRE, a subpattern can be named in one of three ways: (?<name>...) or
+(?'name'...) as in Perl, or (?P<name>...) as in Python. References to capturing
+parentheses from other parts of the pattern, such as
+.\" HTML <a href="#backreferences">
+.\" </a>
+back references,
+.\"
+.\" HTML <a href="#recursion">
+.\" </a>
+recursion,
+.\"
+and
+.\" HTML <a href="#conditions">
+.\" </a>
+conditions,
+.\"
+can be made by name as well as by number.
+.P
+Names consist of up to 32 alphanumeric characters and underscores. Named
+capturing parentheses are still allocated numbers as well as names, exactly as
+if the names were not present. The PCRE API provides function calls for
+extracting the name-to-number translation table from a compiled pattern. There
+is also a convenience function for extracting a captured substring by name.
+.P
+By default, a name must be unique within a pattern, but it is possible to relax
+this constraint by setting the PCRE_DUPNAMES option at compile time. (Duplicate
+names are also always permitted for subpatterns with the same number, set up as
+described in the previous section.) Duplicate names can be useful for patterns
+where only one instance of the named parentheses can match. Suppose you want to
+match the name of a weekday, either as a 3-letter abbreviation or as the full
+name, and in both cases you want to extract the abbreviation. This pattern
+(ignoring the line breaks) does the job:
+.sp
+  (?<DN>Mon|Fri|Sun)(?:day)?|
+  (?<DN>Tue)(?:sday)?|
+  (?<DN>Wed)(?:nesday)?|
+  (?<DN>Thu)(?:rsday)?|
+  (?<DN>Sat)(?:urday)?
+.sp
+There are five capturing substrings, but only one is ever set after a match.
+(An alternative way of solving this problem is to use a "branch reset"
+subpattern, as described in the previous section.)
+.P
+The convenience function for extracting the data by name returns the substring
+for the first (and in this example, the only) subpattern of that name that
+matched. This saves searching to find which numbered subpattern it was.
+.P
+If you make a back reference to a non-unique named subpattern from elsewhere in
+the pattern, the one that corresponds to the first occurrence of the name is
+used. In the absence of duplicate numbers (see the previous section) this is
+the one with the lowest number. If you use a named reference in a condition
+test (see the
+.\"
+.\" HTML <a href="#conditions">
+.\" </a>
+section about conditions
+.\"
+below), either to check whether a subpattern has matched, or to check for
+recursion, all subpatterns with the same name are tested. If the condition is
+true for any one of them, the overall condition is true. This is the same
+behaviour as testing by number. For further details of the interfaces for
+handling named subpatterns, see the
+.\" HREF
+\fBpcreapi\fP
+.\"
+documentation.
+.P
+\fBWarning:\fP You cannot use different names to distinguish between two
+subpatterns with the same number because PCRE uses only the numbers when
+matching. For this reason, an error is given at compile time if different names
+are given to subpatterns with the same number. However, you can give the same
+name to subpatterns with the same number, even when PCRE_DUPNAMES is not set.
+.
+.
+.SH REPETITION
+.rs
+.sp
+Repetition is specified by quantifiers, which can follow any of the following
+items:
+.sp
+  a literal data character
+  the dot metacharacter
+  the \eC escape sequence
+  the \eX escape sequence
+  the \eR escape sequence
+  an escape such as \ed or \epL that matches a single character
+  a character class
+  a back reference (see next section)
+  a parenthesized subpattern (including assertions)
+  a subroutine call to a subpattern (recursive or otherwise)
+.sp
+The general repetition quantifier specifies a minimum and maximum number of
+permitted matches, by giving the two numbers in curly brackets (braces),
+separated by a comma. The numbers must be less than 65536, and the first must
+be less than or equal to the second. For example:
+.sp
+  z{2,4}
+.sp
+matches "zz", "zzz", or "zzzz". A closing brace on its own is not a special
+character. If the second number is omitted, but the comma is present, there is
+no upper limit; if the second number and the comma are both omitted, the
+quantifier specifies an exact number of required matches. Thus
+.sp
+  [aeiou]{3,}
+.sp
+matches at least 3 successive vowels, but may match many more, while
+.sp
+  \ed{8}
+.sp
+matches exactly 8 digits. An opening curly bracket that appears in a position
+where a quantifier is not allowed, or one that does not match the syntax of a
+quantifier, is taken as a literal character. For example, {,6} is not a
+quantifier, but a literal string of four characters.
+.P
+In UTF modes, quantifiers apply to characters rather than to individual data
+units. Thus, for example, \ex{100}{2} matches two characters, each of
+which is represented by a two-byte sequence in a UTF-8 string. Similarly,
+\eX{3} matches three Unicode extended grapheme clusters, each of which may be
+several data units long (and they may be of different lengths).
+.P
+The quantifier {0} is permitted, causing the expression to behave as if the
+previous item and the quantifier were not present. This may be useful for
+subpatterns that are referenced as
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+subroutines
+.\"
+from elsewhere in the pattern (but see also the section entitled
+.\" HTML <a href="#subdefine">
+.\" </a>
+"Defining subpatterns for use by reference only"
+.\"
+below). Items other than subpatterns that have a {0} quantifier are omitted
+from the compiled pattern.
+.P
+For convenience, the three most common quantifiers have single-character
+abbreviations:
+.sp
+  *    is equivalent to {0,}
+  +    is equivalent to {1,}
+  ?    is equivalent to {0,1}
+.sp
+It is possible to construct infinite loops by following a subpattern that can
+match no characters with a quantifier that has no upper limit, for example:
+.sp
+  (a?)*
+.sp
+Earlier versions of Perl and PCRE used to give an error at compile time for
+such patterns. However, because there are cases where this can be useful, such
+patterns are now accepted, but if any repetition of the subpattern does in fact
+match no characters, the loop is forcibly broken.
+.P
+By default, the quantifiers are "greedy", that is, they match as much as
+possible (up to the maximum number of permitted times), without causing the
+rest of the pattern to fail. The classic example of where this gives problems
+is in trying to match comments in C programs. These appear between /* and */
+and within the comment, individual * and / characters may appear. An attempt to
+match C comments by applying the pattern
+.sp
+  /\e*.*\e*/
+.sp
+to the string
+.sp
+  /* first comment */  not comment  /* second comment */
+.sp
+fails, because it matches the entire string owing to the greediness of the .*
+item.
+.P
+However, if a quantifier is followed by a question mark, it ceases to be
+greedy, and instead matches the minimum number of times possible, so the
+pattern
+.sp
+  /\e*.*?\e*/
+.sp
+does the right thing with the C comments. The meaning of the various
+quantifiers is not otherwise changed, just the preferred number of matches.
+Do not confuse this use of question mark with its use as a quantifier in its
+own right. Because it has two uses, it can sometimes appear doubled, as in
+.sp
+  \ed??\ed
+.sp
+which matches one digit by preference, but can match two if that is the only
+way the rest of the pattern matches.
+.P
+If the PCRE_UNGREEDY option is set (an option that is not available in Perl),
+the quantifiers are not greedy by default, but individual ones can be made
+greedy by following them with a question mark. In other words, it inverts the
+default behaviour.
+.P
+When a parenthesized subpattern is quantified with a minimum repeat count that
+is greater than 1 or with a limited maximum, more memory is required for the
+compiled pattern, in proportion to the size of the minimum or maximum.
+.P
+If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equivalent
+to Perl's /s) is set, thus allowing the dot to match newlines, the pattern is
+implicitly anchored, because whatever follows will be tried against every
+character position in the subject string, so there is no point in retrying the
+overall match at any position after the first. PCRE normally treats such a
+pattern as though it were preceded by \eA.
+.P
+In cases where it is known that the subject string contains no newlines, it is
+worth setting PCRE_DOTALL in order to obtain this optimization, or
+alternatively using ^ to indicate anchoring explicitly.
+.P
+However, there are some cases where the optimization cannot be used. When .*
+is inside capturing parentheses that are the subject of a back reference
+elsewhere in the pattern, a match at the start may fail where a later one
+succeeds. Consider, for example:
+.sp
+  (.*)abc\e1
+.sp
+If the subject is "xyz123abc123" the match point is the fourth character. For
+this reason, such a pattern is not implicitly anchored.
+.P
+Another case where implicit anchoring is not applied is when the leading .* is
+inside an atomic group. Once again, a match at the start may fail where a later
+one succeeds. Consider this pattern:
+.sp
+  (?>.*?a)b
+.sp
+It matches "ab" in the subject "aab". The use of the backtracking control verbs
+(*PRUNE) and (*SKIP) also disable this optimization.
+.P
+When a capturing subpattern is repeated, the value captured is the substring
+that matched the final iteration. For example, after
+.sp
+  (tweedle[dume]{3}\es*)+
+.sp
+has matched "tweedledum tweedledee" the value of the captured substring is
+"tweedledee". However, if there are nested capturing subpatterns, the
+corresponding captured values may have been set in previous iterations. For
+example, after
+.sp
+  /(a|(b))+/
+.sp
+matches "aba" the value of the second captured substring is "b".
+.
+.
+.\" HTML <a name="atomicgroup"></a>
+.SH "ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS"
+.rs
+.sp
+With both maximizing ("greedy") and minimizing ("ungreedy" or "lazy")
+repetition, failure of what follows normally causes the repeated item to be
+re-evaluated to see if a different number of repeats allows the rest of the
+pattern to match. Sometimes it is useful to prevent this, either to change the
+nature of the match, or to cause it fail earlier than it otherwise might, when
+the author of the pattern knows there is no point in carrying on.
+.P
+Consider, for example, the pattern \ed+foo when applied to the subject line
+.sp
+  123456bar
+.sp
+After matching all 6 digits and then failing to match "foo", the normal
+action of the matcher is to try again with only 5 digits matching the \ed+
+item, and then with 4, and so on, before ultimately failing. "Atomic grouping"
+(a term taken from Jeffrey Friedl's book) provides the means for specifying
+that once a subpattern has matched, it is not to be re-evaluated in this way.
+.P
+If we use atomic grouping for the previous example, the matcher gives up
+immediately on failing to match "foo" the first time. The notation is a kind of
+special parenthesis, starting with (?> as in this example:
+.sp
+  (?>\ed+)foo
+.sp
+This kind of parenthesis "locks up" the  part of the pattern it contains once
+it has matched, and a failure further into the pattern is prevented from
+backtracking into it. Backtracking past it to previous items, however, works as
+normal.
+.P
+An alternative description is that a subpattern of this type matches the string
+of characters that an identical standalone pattern would match, if anchored at
+the current point in the subject string.
+.P
+Atomic grouping subpatterns are not capturing subpatterns. Simple cases such as
+the above example can be thought of as a maximizing repeat that must swallow
+everything it can. So, while both \ed+ and \ed+? are prepared to adjust the
+number of digits they match in order to make the rest of the pattern match,
+(?>\ed+) can only match an entire sequence of digits.
+.P
+Atomic groups in general can of course contain arbitrarily complicated
+subpatterns, and can be nested. However, when the subpattern for an atomic
+group is just a single repeated item, as in the example above, a simpler
+notation, called a "possessive quantifier" can be used. This consists of an
+additional + character following a quantifier. Using this notation, the
+previous example can be rewritten as
+.sp
+  \ed++foo
+.sp
+Note that a possessive quantifier can be used with an entire group, for
+example:
+.sp
+  (abc|xyz){2,3}+
+.sp
+Possessive quantifiers are always greedy; the setting of the PCRE_UNGREEDY
+option is ignored. They are a convenient notation for the simpler forms of
+atomic group. However, there is no difference in the meaning of a possessive
+quantifier and the equivalent atomic group, though there may be a performance
+difference; possessive quantifiers should be slightly faster.
+.P
+The possessive quantifier syntax is an extension to the Perl 5.8 syntax.
+Jeffrey Friedl originated the idea (and the name) in the first edition of his
+book. Mike McCloskey liked it, so implemented it when he built Sun's Java
+package, and PCRE copied it from there. It ultimately found its way into Perl
+at release 5.10.
+.P
+PCRE has an optimization that automatically "possessifies" certain simple
+pattern constructs. For example, the sequence A+B is treated as A++B because
+there is no point in backtracking into a sequence of A's when B must follow.
+.P
+When a pattern contains an unlimited repeat inside a subpattern that can itself
+be repeated an unlimited number of times, the use of an atomic group is the
+only way to avoid some failing matches taking a very long time indeed. The
+pattern
+.sp
+  (\eD+|<\ed+>)*[!?]
+.sp
+matches an unlimited number of substrings that either consist of non-digits, or
+digits enclosed in <>, followed by either ! or ?. When it matches, it runs
+quickly. However, if it is applied to
+.sp
+  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+.sp
+it takes a long time before reporting failure. This is because the string can
+be divided between the internal \eD+ repeat and the external * repeat in a
+large number of ways, and all have to be tried. (The example uses [!?] rather
+than a single character at the end, because both PCRE and Perl have an
+optimization that allows for fast failure when a single character is used. They
+remember the last single character that is required for a match, and fail early
+if it is not present in the string.) If the pattern is changed so that it uses
+an atomic group, like this:
+.sp
+  ((?>\eD+)|<\ed+>)*[!?]
+.sp
+sequences of non-digits cannot be broken, and failure happens quickly.
+.
+.
+.\" HTML <a name="backreferences"></a>
+.SH "BACK REFERENCES"
+.rs
+.sp
+Outside a character class, a backslash followed by a digit greater than 0 (and
+possibly further digits) is a back reference to a capturing subpattern earlier
+(that is, to its left) in the pattern, provided there have been that many
+previous capturing left parentheses.
+.P
+However, if the decimal number following the backslash is less than 10, it is
+always taken as a back reference, and causes an error only if there are not
+that many capturing left parentheses in the entire pattern. In other words, the
+parentheses that are referenced need not be to the left of the reference for
+numbers less than 10. A "forward back reference" of this type can make sense
+when a repetition is involved and the subpattern to the right has participated
+in an earlier iteration.
+.P
+It is not possible to have a numerical "forward back reference" to a subpattern
+whose number is 10 or more using this syntax because a sequence such as \e50 is
+interpreted as a character defined in octal. See the subsection entitled
+"Non-printing characters"
+.\" HTML <a href="#digitsafterbackslash">
+.\" </a>
+above
+.\"
+for further details of the handling of digits following a backslash. There is
+no such problem when named parentheses are used. A back reference to any
+subpattern is possible using named parentheses (see below).
+.P
+Another way of avoiding the ambiguity inherent in the use of digits following a
+backslash is to use the \eg escape sequence. This escape must be followed by an
+unsigned number or a negative number, optionally enclosed in braces. These
+examples are all identical:
+.sp
+  (ring), \e1
+  (ring), \eg1
+  (ring), \eg{1}
+.sp
+An unsigned number specifies an absolute reference without the ambiguity that
+is present in the older syntax. It is also useful when literal digits follow
+the reference. A negative number is a relative reference. Consider this
+example:
+.sp
+  (abc(def)ghi)\eg{-1}
+.sp
+The sequence \eg{-1} is a reference to the most recently started capturing
+subpattern before \eg, that is, is it equivalent to \e2 in this example.
+Similarly, \eg{-2} would be equivalent to \e1. The use of relative references
+can be helpful in long patterns, and also in patterns that are created by
+joining together fragments that contain references within themselves.
+.P
+A back reference matches whatever actually matched the capturing subpattern in
+the current subject string, rather than anything matching the subpattern
+itself (see
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+"Subpatterns as subroutines"
+.\"
+below for a way of doing that). So the pattern
+.sp
+  (sens|respons)e and \e1ibility
+.sp
+matches "sense and sensibility" and "response and responsibility", but not
+"sense and responsibility". If caseful matching is in force at the time of the
+back reference, the case of letters is relevant. For example,
+.sp
+  ((?i)rah)\es+\e1
+.sp
+matches "rah rah" and "RAH RAH", but not "RAH rah", even though the original
+capturing subpattern is matched caselessly.
+.P
+There are several different ways of writing back references to named
+subpatterns. The .NET syntax \ek{name} and the Perl syntax \ek<name> or
+\ek'name' are supported, as is the Python syntax (?P=name). Perl 5.10's unified
+back reference syntax, in which \eg can be used for both numeric and named
+references, is also supported. We could rewrite the above example in any of
+the following ways:
+.sp
+  (?<p1>(?i)rah)\es+\ek<p1>
+  (?'p1'(?i)rah)\es+\ek{p1}
+  (?P<p1>(?i)rah)\es+(?P=p1)
+  (?<p1>(?i)rah)\es+\eg{p1}
+.sp
+A subpattern that is referenced by name may appear in the pattern before or
+after the reference.
+.P
+There may be more than one back reference to the same subpattern. If a
+subpattern has not actually been used in a particular match, any back
+references to it always fail by default. For example, the pattern
+.sp
+  (a|(bc))\e2
+.sp
+always fails if it starts to match "a" rather than "bc". However, if the
+PCRE_JAVASCRIPT_COMPAT option is set at compile time, a back reference to an
+unset value matches an empty string.
+.P
+Because there may be many capturing parentheses in a pattern, all digits
+following a backslash are taken as part of a potential back reference number.
+If the pattern continues with a digit character, some delimiter must be used to
+terminate the back reference. If the PCRE_EXTENDED option is set, this can be
+white space. Otherwise, the \eg{ syntax or an empty comment (see
+.\" HTML <a href="#comments">
+.\" </a>
+"Comments"
+.\"
+below) can be used.
+.
+.SS "Recursive back references"
+.rs
+.sp
+A back reference that occurs inside the parentheses to which it refers fails
+when the subpattern is first used, so, for example, (a\e1) never matches.
+However, such references can be useful inside repeated subpatterns. For
+example, the pattern
+.sp
+  (a|b\e1)+
+.sp
+matches any number of "a"s and also "aba", "ababbaa" etc. At each iteration of
+the subpattern, the back reference matches the character string corresponding
+to the previous iteration. In order for this to work, the pattern must be such
+that the first iteration does not need to match the back reference. This can be
+done using alternation, as in the example above, or by a quantifier with a
+minimum of zero.
+.P
+Back references of this type cause the group that they reference to be treated
+as an
+.\" HTML <a href="#atomicgroup">
+.\" </a>
+atomic group.
+.\"
+Once the whole group has been matched, a subsequent matching failure cannot
+cause backtracking into the middle of the group.
+.
+.
+.\" HTML <a name="bigassertions"></a>
+.SH ASSERTIONS
+.rs
+.sp
+An assertion is a test on the characters following or preceding the current
+matching point that does not actually consume any characters. The simple
+assertions coded as \eb, \eB, \eA, \eG, \eZ, \ez, ^ and $ are described
+.\" HTML <a href="#smallassertions">
+.\" </a>
+above.
+.\"
+.P
+More complicated assertions are coded as subpatterns. There are two kinds:
+those that look ahead of the current position in the subject string, and those
+that look behind it. An assertion subpattern is matched in the normal way,
+except that it does not cause the current matching position to be changed.
+.P
+Assertion subpatterns are not capturing subpatterns. If such an assertion
+contains capturing subpatterns within it, these are counted for the purposes of
+numbering the capturing subpatterns in the whole pattern. However, substring
+capturing is carried out only for positive assertions, because it does not make
+sense for negative assertions.
+.P
+For compatibility with Perl, assertion subpatterns may be repeated; though
+it makes no sense to assert the same thing several times, the side effect of
+capturing parentheses may occasionally be useful. In practice, there only three
+cases:
+.sp
+(1) If the quantifier is {0}, the assertion is never obeyed during matching.
+However, it may contain internal capturing parenthesized groups that are called
+from elsewhere via the
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+subroutine mechanism.
+.\"
+.sp
+(2) If quantifier is {0,n} where n is greater than zero, it is treated as if it
+were {0,1}. At run time, the rest of the pattern match is tried with and
+without the assertion, the order depending on the greediness of the quantifier.
+.sp
+(3) If the minimum repetition is greater than zero, the quantifier is ignored.
+The assertion is obeyed just once when encountered during matching.
+.
+.
+.SS "Lookahead assertions"
+.rs
+.sp
+Lookahead assertions start with (?= for positive assertions and (?! for
+negative assertions. For example,
+.sp
+  \ew+(?=;)
+.sp
+matches a word followed by a semicolon, but does not include the semicolon in
+the match, and
+.sp
+  foo(?!bar)
+.sp
+matches any occurrence of "foo" that is not followed by "bar". Note that the
+apparently similar pattern
+.sp
+  (?!foo)bar
+.sp
+does not find an occurrence of "bar" that is preceded by something other than
+"foo"; it finds any occurrence of "bar" whatsoever, because the assertion
+(?!foo) is always true when the next three characters are "bar". A
+lookbehind assertion is needed to achieve the other effect.
+.P
+If you want to force a matching failure at some point in a pattern, the most
+convenient way to do it is with (?!) because an empty string always matches, so
+an assertion that requires there not to be an empty string must always fail.
+The backtracking control verb (*FAIL) or (*F) is a synonym for (?!).
+.
+.
+.\" HTML <a name="lookbehind"></a>
+.SS "Lookbehind assertions"
+.rs
+.sp
+Lookbehind assertions start with (?<= for positive assertions and (?<! for
+negative assertions. For example,
+.sp
+  (?<!foo)bar
+.sp
+does find an occurrence of "bar" that is not preceded by "foo". The contents of
+a lookbehind assertion are restricted such that all the strings it matches must
+have a fixed length. However, if there are several top-level alternatives, they
+do not all have to have the same fixed length. Thus
+.sp
+  (?<=bullock|donkey)
+.sp
+is permitted, but
+.sp
+  (?<!dogs?|cats?)
+.sp
+causes an error at compile time. Branches that match different length strings
+are permitted only at the top level of a lookbehind assertion. This is an
+extension compared with Perl, which requires all branches to match the same
+length of string. An assertion such as
+.sp
+  (?<=ab(c|de))
+.sp
+is not permitted, because its single top-level branch can match two different
+lengths, but it is acceptable to PCRE if rewritten to use two top-level
+branches:
+.sp
+  (?<=abc|abde)
+.sp
+In some cases, the escape sequence \eK
+.\" HTML <a href="#resetmatchstart">
+.\" </a>
+(see above)
+.\"
+can be used instead of a lookbehind assertion to get round the fixed-length
+restriction.
+.P
+The implementation of lookbehind assertions is, for each alternative, to
+temporarily move the current position back by the fixed length and then try to
+match. If there are insufficient characters before the current position, the
+assertion fails.
+.P
+In a UTF mode, PCRE does not allow the \eC escape (which matches a single data
+unit even in a UTF mode) to appear in lookbehind assertions, because it makes
+it impossible to calculate the length of the lookbehind. The \eX and \eR
+escapes, which can match different numbers of data units, are also not
+permitted.
+.P
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+"Subroutine"
+.\"
+calls (see below) such as (?2) or (?&X) are permitted in lookbehinds, as long
+as the subpattern matches a fixed-length string.
+.\" HTML <a href="#recursion">
+.\" </a>
+Recursion,
+.\"
+however, is not supported.
+.P
+Possessive quantifiers can be used in conjunction with lookbehind assertions to
+specify efficient matching of fixed-length strings at the end of subject
+strings. Consider a simple pattern such as
+.sp
+  abcd$
+.sp
+when applied to a long string that does not match. Because matching proceeds
+from left to right, PCRE will look for each "a" in the subject and then see if
+what follows matches the rest of the pattern. If the pattern is specified as
+.sp
+  ^.*abcd$
+.sp
+the initial .* matches the entire string at first, but when this fails (because
+there is no following "a"), it backtracks to match all but the last character,
+then all but the last two characters, and so on. Once again the search for "a"
+covers the entire string, from right to left, so we are no better off. However,
+if the pattern is written as
+.sp
+  ^.*+(?<=abcd)
+.sp
+there can be no backtracking for the .*+ item; it can match only the entire
+string. The subsequent lookbehind assertion does a single test on the last four
+characters. If it fails, the match fails immediately. For long strings, this
+approach makes a significant difference to the processing time.
+.
+.
+.SS "Using multiple assertions"
+.rs
+.sp
+Several assertions (of any sort) may occur in succession. For example,
+.sp
+  (?<=\ed{3})(?<!999)foo
+.sp
+matches "foo" preceded by three digits that are not "999". Notice that each of
+the assertions is applied independently at the same point in the subject
+string. First there is a check that the previous three characters are all
+digits, and then there is a check that the same three characters are not "999".
+This pattern does \fInot\fP match "foo" preceded by six characters, the first
+of which are digits and the last three of which are not "999". For example, it
+doesn't match "123abcfoo". A pattern to do that is
+.sp
+  (?<=\ed{3}...)(?<!999)foo
+.sp
+This time the first assertion looks at the preceding six characters, checking
+that the first three are digits, and then the second assertion checks that the
+preceding three characters are not "999".
+.P
+Assertions can be nested in any combination. For example,
+.sp
+  (?<=(?<!foo)bar)baz
+.sp
+matches an occurrence of "baz" that is preceded by "bar" which in turn is not
+preceded by "foo", while
+.sp
+  (?<=\ed{3}(?!999)...)foo
+.sp
+is another pattern that matches "foo" preceded by three digits and any three
+characters that are not "999".
+.
+.
+.\" HTML <a name="conditions"></a>
+.SH "CONDITIONAL SUBPATTERNS"
+.rs
+.sp
+It is possible to cause the matching process to obey a subpattern
+conditionally or to choose between two alternative subpatterns, depending on
+the result of an assertion, or whether a specific capturing subpattern has
+already been matched. The two possible forms of conditional subpattern are:
+.sp
+  (?(condition)yes-pattern)
+  (?(condition)yes-pattern|no-pattern)
+.sp
+If the condition is satisfied, the yes-pattern is used; otherwise the
+no-pattern (if present) is used. If there are more than two alternatives in the
+subpattern, a compile-time error occurs. Each of the two alternatives may
+itself contain nested subpatterns of any form, including conditional
+subpatterns; the restriction to two alternatives applies only at the level of
+the condition. This pattern fragment is an example where the alternatives are
+complex:
+.sp
+  (?(1) (A|B|C) | (D | (?(2)E|F) | E) )
+.sp
+.P
+There are four kinds of condition: references to subpatterns, references to
+recursion, a pseudo-condition called DEFINE, and assertions.
+.
+.SS "Checking for a used subpattern by number"
+.rs
+.sp
+If the text between the parentheses consists of a sequence of digits, the
+condition is true if a capturing subpattern of that number has previously
+matched. If there is more than one capturing subpattern with the same number
+(see the earlier
+.\"
+.\" HTML <a href="#recursion">
+.\" </a>
+section about duplicate subpattern numbers),
+.\"
+the condition is true if any of them have matched. An alternative notation is
+to precede the digits with a plus or minus sign. In this case, the subpattern
+number is relative rather than absolute. The most recently opened parentheses
+can be referenced by (?(-1), the next most recent by (?(-2), and so on. Inside
+loops it can also make sense to refer to subsequent groups. The next
+parentheses to be opened can be referenced as (?(+1), and so on. (The value
+zero in any of these forms is not used; it provokes a compile-time error.)
+.P
+Consider the following pattern, which contains non-significant white space to
+make it more readable (assume the PCRE_EXTENDED option) and to divide it into
+three parts for ease of discussion:
+.sp
+  ( \e( )?    [^()]+    (?(1) \e) )
+.sp
+The first part matches an optional opening parenthesis, and if that
+character is present, sets it as the first captured substring. The second part
+matches one or more characters that are not parentheses. The third part is a
+conditional subpattern that tests whether or not the first set of parentheses
+matched. If they did, that is, if subject started with an opening parenthesis,
+the condition is true, and so the yes-pattern is executed and a closing
+parenthesis is required. Otherwise, since no-pattern is not present, the
+subpattern matches nothing. In other words, this pattern matches a sequence of
+non-parentheses, optionally enclosed in parentheses.
+.P
+If you were embedding this pattern in a larger one, you could use a relative
+reference:
+.sp
+  ...other stuff... ( \e( )?    [^()]+    (?(-1) \e) ) ...
+.sp
+This makes the fragment independent of the parentheses in the larger pattern.
+.
+.SS "Checking for a used subpattern by name"
+.rs
+.sp
+Perl uses the syntax (?(<name>)...) or (?('name')...) to test for a used
+subpattern by name. For compatibility with earlier versions of PCRE, which had
+this facility before Perl, the syntax (?(name)...) is also recognized. However,
+there is a possible ambiguity with this syntax, because subpattern names may
+consist entirely of digits. PCRE looks first for a named subpattern; if it
+cannot find one and the name consists entirely of digits, PCRE looks for a
+subpattern of that number, which must be greater than zero. Using subpattern
+names that consist entirely of digits is not recommended.
+.P
+Rewriting the above example to use a named subpattern gives this:
+.sp
+  (?<OPEN> \e( )?    [^()]+    (?(<OPEN>) \e) )
+.sp
+If the name used in a condition of this kind is a duplicate, the test is
+applied to all subpatterns of the same name, and is true if any one of them has
+matched.
+.
+.SS "Checking for pattern recursion"
+.rs
+.sp
+If the condition is the string (R), and there is no subpattern with the name R,
+the condition is true if a recursive call to the whole pattern or any
+subpattern has been made. If digits or a name preceded by ampersand follow the
+letter R, for example:
+.sp
+  (?(R3)...) or (?(R&name)...)
+.sp
+the condition is true if the most recent recursion is into a subpattern whose
+number or name is given. This condition does not check the entire recursion
+stack. If the name used in a condition of this kind is a duplicate, the test is
+applied to all subpatterns of the same name, and is true if any one of them is
+the most recent recursion.
+.P
+At "top level", all these recursion test conditions are false.
+.\" HTML <a href="#recursion">
+.\" </a>
+The syntax for recursive patterns
+.\"
+is described below.
+.
+.\" HTML <a name="subdefine"></a>
+.SS "Defining subpatterns for use by reference only"
+.rs
+.sp
+If the condition is the string (DEFINE), and there is no subpattern with the
+name DEFINE, the condition is always false. In this case, there may be only one
+alternative in the subpattern. It is always skipped if control reaches this
+point in the pattern; the idea of DEFINE is that it can be used to define
+subroutines that can be referenced from elsewhere. (The use of
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+subroutines
+.\"
+is described below.) For example, a pattern to match an IPv4 address such as
+"192.168.23.245" could be written like this (ignore white space and line
+breaks):
+.sp
+  (?(DEFINE) (?<byte> 2[0-4]\ed | 25[0-5] | 1\ed\ed | [1-9]?\ed) )
+  \eb (?&byte) (\e.(?&byte)){3} \eb
+.sp
+The first part of the pattern is a DEFINE group inside which a another group
+named "byte" is defined. This matches an individual component of an IPv4
+address (a number less than 256). When matching takes place, this part of the
+pattern is skipped because DEFINE acts like a false condition. The rest of the
+pattern uses references to the named group to match the four dot-separated
+components of an IPv4 address, insisting on a word boundary at each end.
+.
+.SS "Assertion conditions"
+.rs
+.sp
+If the condition is not in any of the above formats, it must be an assertion.
+This may be a positive or negative lookahead or lookbehind assertion. Consider
+this pattern, again containing non-significant white space, and with the two
+alternatives on the second line:
+.sp
+  (?(?=[^a-z]*[a-z])
+  \ed{2}-[a-z]{3}-\ed{2}  |  \ed{2}-\ed{2}-\ed{2} )
+.sp
+The condition is a positive lookahead assertion that matches an optional
+sequence of non-letters followed by a letter. In other words, it tests for the
+presence of at least one letter in the subject. If a letter is found, the
+subject is matched against the first alternative; otherwise it is matched
+against the second. This pattern matches strings in one of the two forms
+dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.
+.
+.
+.\" HTML <a name="comments"></a>
+.SH COMMENTS
+.rs
+.sp
+There are two ways of including comments in patterns that are processed by
+PCRE. In both cases, the start of the comment must not be in a character class,
+nor in the middle of any other sequence of related characters such as (?: or a
+subpattern name or number. The characters that make up a comment play no part
+in the pattern matching.
+.P
+The sequence (?# marks the start of a comment that continues up to the next
+closing parenthesis. Nested parentheses are not permitted. If the PCRE_EXTENDED
+option is set, an unescaped # character also introduces a comment, which in
+this case continues to immediately after the next newline character or
+character sequence in the pattern. Which characters are interpreted as newlines
+is controlled by the options passed to a compiling function or by a special
+sequence at the start of the pattern, as described in the section entitled
+.\" HTML <a href="#newlines">
+.\" </a>
+"Newline conventions"
+.\"
+above. Note that the end of this type of comment is a literal newline sequence
+in the pattern; escape sequences that happen to represent a newline do not
+count. For example, consider this pattern when PCRE_EXTENDED is set, and the
+default newline convention is in force:
+.sp
+  abc #comment \en still comment
+.sp
+On encountering the # character, \fBpcre_compile()\fP skips along, looking for
+a newline in the pattern. The sequence \en is still literal at this stage, so
+it does not terminate the comment. Only an actual character with the code value
+0x0a (the default newline) does so.
+.
+.
+.\" HTML <a name="recursion"></a>
+.SH "RECURSIVE PATTERNS"
+.rs
+.sp
+Consider the problem of matching a string in parentheses, allowing for
+unlimited nested parentheses. Without the use of recursion, the best that can
+be done is to use a pattern that matches up to some fixed depth of nesting. It
+is not possible to handle an arbitrary nesting depth.
+.P
+For some time, Perl has provided a facility that allows regular expressions to
+recurse (amongst other things). It does this by interpolating Perl code in the
+expression at run time, and the code can refer to the expression itself. A Perl
+pattern using code interpolation to solve the parentheses problem can be
+created like this:
+.sp
+  $re = qr{\e( (?: (?>[^()]+) | (?p{$re}) )* \e)}x;
+.sp
+The (?p{...}) item interpolates Perl code at run time, and in this case refers
+recursively to the pattern in which it appears.
+.P
+Obviously, PCRE cannot support the interpolation of Perl code. Instead, it
+supports special syntax for recursion of the entire pattern, and also for
+individual subpattern recursion. After its introduction in PCRE and Python,
+this kind of recursion was subsequently introduced into Perl at release 5.10.
+.P
+A special item that consists of (? followed by a number greater than zero and a
+closing parenthesis is a recursive subroutine call of the subpattern of the
+given number, provided that it occurs inside that subpattern. (If not, it is a
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+non-recursive subroutine
+.\"
+call, which is described in the next section.) The special item (?R) or (?0) is
+a recursive call of the entire regular expression.
+.P
+This PCRE pattern solves the nested parentheses problem (assume the
+PCRE_EXTENDED option is set so that white space is ignored):
+.sp
+  \e( ( [^()]++ | (?R) )* \e)
+.sp
+First it matches an opening parenthesis. Then it matches any number of
+substrings which can either be a sequence of non-parentheses, or a recursive
+match of the pattern itself (that is, a correctly parenthesized substring).
+Finally there is a closing parenthesis. Note the use of a possessive quantifier
+to avoid backtracking into sequences of non-parentheses.
+.P
+If this were part of a larger pattern, you would not want to recurse the entire
+pattern, so instead you could use this:
+.sp
+  ( \e( ( [^()]++ | (?1) )* \e) )
+.sp
+We have put the pattern into parentheses, and caused the recursion to refer to
+them instead of the whole pattern.
+.P
+In a larger pattern, keeping track of parenthesis numbers can be tricky. This
+is made easier by the use of relative references. Instead of (?1) in the
+pattern above you can write (?-2) to refer to the second most recently opened
+parentheses preceding the recursion. In other words, a negative number counts
+capturing parentheses leftwards from the point at which it is encountered.
+.P
+It is also possible to refer to subsequently opened parentheses, by writing
+references such as (?+2). However, these cannot be recursive because the
+reference is not inside the parentheses that are referenced. They are always
+.\" HTML <a href="#subpatternsassubroutines">
+.\" </a>
+non-recursive subroutine
+.\"
+calls, as described in the next section.
+.P
+An alternative approach is to use named parentheses instead. The Perl syntax
+for this is (?&name); PCRE's earlier syntax (?P>name) is also supported. We
+could rewrite the above example as follows:
+.sp
+  (?<pn> \e( ( [^()]++ | (?&pn) )* \e) )
+.sp
+If there is more than one subpattern with the same name, the earliest one is
+used.
+.P
+This particular example pattern that we have been looking at contains nested
+unlimited repeats, and so the use of a possessive quantifier for matching
+strings of non-parentheses is important when applying the pattern to strings
+that do not match. For example, when this pattern is applied to
+.sp
+  (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
+.sp
+it yields "no match" quickly. However, if a possessive quantifier is not used,
+the match runs for a very long time indeed because there are so many different
+ways the + and * repeats can carve up the subject, and all have to be tested
+before failure can be reported.
+.P
+At the end of a match, the values of capturing parentheses are those from
+the outermost level. If you want to obtain intermediate values, a callout
+function can be used (see below and the
+.\" HREF
+\fBpcrecallout\fP
+.\"
+documentation). If the pattern above is matched against
+.sp
+  (ab(cd)ef)
+.sp
+the value for the inner capturing parentheses (numbered 2) is "ef", which is
+the last value taken on at the top level. If a capturing subpattern is not
+matched at the top level, its final captured value is unset, even if it was
+(temporarily) set at a deeper level during the matching process.
+.P
+If there are more than 15 capturing parentheses in a pattern, PCRE has to
+obtain extra memory to store data during a recursion, which it does by using
+\fBpcre_malloc\fP, freeing it via \fBpcre_free\fP afterwards. If no memory can
+be obtained, the match fails with the PCRE_ERROR_NOMEMORY error.
+.P
+Do not confuse the (?R) item with the condition (R), which tests for recursion.
+Consider this pattern, which matches text in angle brackets, allowing for
+arbitrary nesting. Only digits are allowed in nested brackets (that is, when
+recursing), whereas any characters are permitted at the outer level.
+.sp
+  < (?: (?(R) \ed++  | [^<>]*+) | (?R)) * >
+.sp
+In this pattern, (?(R) is the start of a conditional subpattern, with two
+different alternatives for the recursive and non-recursive cases. The (?R) item
+is the actual recursive call.
+.
+.
+.\" HTML <a name="recursiondifference"></a>
+.SS "Differences in recursion processing between PCRE and Perl"
+.rs
+.sp
+Recursion processing in PCRE differs from Perl in two important ways. In PCRE
+(like Python, but unlike Perl), a recursive subpattern call is always treated
+as an atomic group. That is, once it has matched some of the subject string, it
+is never re-entered, even if it contains untried alternatives and there is a
+subsequent matching failure. This can be illustrated by the following pattern,
+which purports to match a palindromic string that contains an odd number of
+characters (for example, "a", "aba", "abcba", "abcdcba"):
+.sp
+  ^(.|(.)(?1)\e2)$
+.sp
+The idea is that it either matches a single character, or two identical
+characters surrounding a sub-palindrome. In Perl, this pattern works; in PCRE
+it does not if the pattern is longer than three characters. Consider the
+subject string "abcba":
+.P
+At the top level, the first character is matched, but as it is not at the end
+of the string, the first alternative fails; the second alternative is taken
+and the recursion kicks in. The recursive call to subpattern 1 successfully
+matches the next character ("b"). (Note that the beginning and end of line
+tests are not part of the recursion).
+.P
+Back at the top level, the next character ("c") is compared with what
+subpattern 2 matched, which was "a". This fails. Because the recursion is
+treated as an atomic group, there are now no backtracking points, and so the
+entire match fails. (Perl is able, at this point, to re-enter the recursion and
+try the second alternative.) However, if the pattern is written with the
+alternatives in the other order, things are different:
+.sp
+  ^((.)(?1)\e2|.)$
+.sp
+This time, the recursing alternative is tried first, and continues to recurse
+until it runs out of characters, at which point the recursion fails. But this
+time we do have another alternative to try at the higher level. That is the big
+difference: in the previous case the remaining alternative is at a deeper
+recursion level, which PCRE cannot use.
+.P
+To change the pattern so that it matches all palindromic strings, not just
+those with an odd number of characters, it is tempting to change the pattern to
+this:
+.sp
+  ^((.)(?1)\e2|.?)$
+.sp
+Again, this works in Perl, but not in PCRE, and for the same reason. When a
+deeper recursion has matched a single character, it cannot be entered again in
+order to match an empty string. The solution is to separate the two cases, and
+write out the odd and even cases as alternatives at the higher level:
+.sp
+  ^(?:((.)(?1)\e2|)|((.)(?3)\e4|.))
+.sp
+If you want to match typical palindromic phrases, the pattern has to ignore all
+non-word characters, which can be done like this:
+.sp
+  ^\eW*+(?:((.)\eW*+(?1)\eW*+\e2|)|((.)\eW*+(?3)\eW*+\e4|\eW*+.\eW*+))\eW*+$
+.sp
+If run with the PCRE_CASELESS option, this pattern matches phrases such as "A
+man, a plan, a canal: Panama!" and it works well in both PCRE and Perl. Note
+the use of the possessive quantifier *+ to avoid backtracking into sequences of
+non-word characters. Without this, PCRE takes a great deal longer (ten times or
+more) to match typical phrases, and Perl takes so long that you think it has
+gone into a loop.
+.P
+\fBWARNING\fP: The palindrome-matching patterns above work only if the subject
+string does not start with a palindrome that is shorter than the entire string.
+For example, although "abcba" is correctly matched, if the subject is "ababa",
+PCRE finds the palindrome "aba" at the start, then fails at top level because
+the end of the string does not follow. Once again, it cannot jump back into the
+recursion to try other alternatives, so the entire match fails.
+.P
+The second way in which PCRE and Perl differ in their recursion processing is
+in the handling of captured values. In Perl, when a subpattern is called
+recursively or as a subpattern (see the next section), it has no access to any
+values that were captured outside the recursion, whereas in PCRE these values
+can be referenced. Consider this pattern:
+.sp
+  ^(.)(\e1|a(?2))
+.sp
+In PCRE, this pattern matches "bab". The first capturing parentheses match "b",
+then in the second group, when the back reference \e1 fails to match "b", the
+second alternative matches "a" and then recurses. In the recursion, \e1 does
+now match "b" and so the whole match succeeds. In Perl, the pattern fails to
+match because inside the recursive call \e1 cannot access the externally set
+value.
+.
+.
+.\" HTML <a name="subpatternsassubroutines"></a>
+.SH "SUBPATTERNS AS SUBROUTINES"
+.rs
+.sp
+If the syntax for a recursive subpattern call (either by number or by
+name) is used outside the parentheses to which it refers, it operates like a
+subroutine in a programming language. The called subpattern may be defined
+before or after the reference. A numbered reference can be absolute or
+relative, as in these examples:
+.sp
+  (...(absolute)...)...(?2)...
+  (...(relative)...)...(?-1)...
+  (...(?+1)...(relative)...
+.sp
+An earlier example pointed out that the pattern
+.sp
+  (sens|respons)e and \e1ibility
+.sp
+matches "sense and sensibility" and "response and responsibility", but not
+"sense and responsibility". If instead the pattern
+.sp
+  (sens|respons)e and (?1)ibility
+.sp
+is used, it does match "sense and responsibility" as well as the other two
+strings. Another example is given in the discussion of DEFINE above.
+.P
+All subroutine calls, whether recursive or not, are always treated as atomic
+groups. That is, once a subroutine has matched some of the subject string, it
+is never re-entered, even if it contains untried alternatives and there is a
+subsequent matching failure. Any capturing parentheses that are set during the
+subroutine call revert to their previous values afterwards.
+.P
+Processing options such as case-independence are fixed when a subpattern is
+defined, so if it is used as a subroutine, such options cannot be changed for
+different calls. For example, consider this pattern:
+.sp
+  (abc)(?i:(?-1))
+.sp
+It matches "abcabc". It does not match "abcABC" because the change of
+processing option does not affect the called subpattern.
+.
+.
+.\" HTML <a name="onigurumasubroutines"></a>
+.SH "ONIGURUMA SUBROUTINE SYNTAX"
+.rs
+.sp
+For compatibility with Oniguruma, the non-Perl syntax \eg followed by a name or
+a number enclosed either in angle brackets or single quotes, is an alternative
+syntax for referencing a subpattern as a subroutine, possibly recursively. Here
+are two of the examples used above, rewritten using this syntax:
+.sp
+  (?<pn> \e( ( (?>[^()]+) | \eg<pn> )* \e) )
+  (sens|respons)e and \eg'1'ibility
+.sp
+PCRE supports an extension to Oniguruma: if a number is preceded by a
+plus or a minus sign it is taken as a relative reference. For example:
+.sp
+  (abc)(?i:\eg<-1>)
+.sp
+Note that \eg{...} (Perl syntax) and \eg<...> (Oniguruma syntax) are \fInot\fP
+synonymous. The former is a back reference; the latter is a subroutine call.
+.
+.
+.SH CALLOUTS
+.rs
+.sp
+Perl has a feature whereby using the sequence (?{...}) causes arbitrary Perl
+code to be obeyed in the middle of matching a regular expression. This makes it
+possible, amongst other things, to extract different substrings that match the
+same pair of parentheses when there is a repetition.
+.P
+PCRE provides a similar feature, but of course it cannot obey arbitrary Perl
+code. The feature is called "callout". The caller of PCRE provides an external
+function by putting its entry point in the global variable \fIpcre_callout\fP
+(8-bit library) or \fIpcre[16|32]_callout\fP (16-bit or 32-bit library).
+By default, this variable contains NULL, which disables all calling out.
+.P
+Within a regular expression, (?C) indicates the points at which the external
+function is to be called. If you want to identify different callout points, you
+can put a number less than 256 after the letter C. The default value is zero.
+For example, this pattern has two callout points:
+.sp
+  (?C1)abc(?C2)def
+.sp
+If the PCRE_AUTO_CALLOUT flag is passed to a compiling function, callouts are
+automatically installed before each item in the pattern. They are all numbered
+255.
+.P
+During matching, when PCRE reaches a callout point, the external function is
+called. It is provided with the number of the callout, the position in the
+pattern, and, optionally, one item of data originally supplied by the caller of
+the matching function. The callout function may cause matching to proceed, to
+backtrack, or to fail altogether. A complete description of the interface to
+the callout function is given in the
+.\" HREF
+\fBpcrecallout\fP
+.\"
+documentation.
+.
+.
+.\" HTML <a name="backtrackcontrol"></a>
+.SH "BACKTRACKING CONTROL"
+.rs
+.sp
+Perl 5.10 introduced a number of "Special Backtracking Control Verbs", which
+are described in the Perl documentation as "experimental and subject to change
+or removal in a future version of Perl". It goes on to say: "Their usage in
+production code should be noted to avoid problems during upgrades." The same
+remarks apply to the PCRE features described in this section.
+.P
+Since these verbs are specifically related to backtracking, most of them can be
+used only when the pattern is to be matched using one of the traditional
+matching functions, which use a backtracking algorithm. With the exception of
+(*FAIL), which behaves like a failing negative assertion, they cause an error
+if encountered by a DFA matching function.
+.P
+If any of these verbs are used in an assertion or in a subpattern that is
+called as a subroutine (whether or not recursively), their effect is confined
+to that subpattern; it does not extend to the surrounding pattern, with one
+exception: the name from a *(MARK), (*PRUNE), or (*THEN) that is encountered in
+a successful positive assertion \fIis\fP passed back when a match succeeds
+(compare capturing parentheses in assertions). Note that such subpatterns are
+processed as anchored at the point where they are tested. Note also that Perl's
+treatment of subroutines and assertions is different in some cases.
+.P
+The new verbs make use of what was previously invalid syntax: an opening
+parenthesis followed by an asterisk. They are generally of the form
+(*VERB) or (*VERB:NAME). Some may take either form, with differing behaviour,
+depending on whether or not an argument is present. A name is any sequence of
+characters that does not include a closing parenthesis. The maximum length of
+name is 255 in the 8-bit library and 65535 in the 16-bit and 32-bit library.
+If the name is empty, that is, if the closing parenthesis immediately follows
+the colon, the effect is as if the colon were not there. Any number of these
+verbs may occur in a pattern.
+.
+.
+.\" HTML <a name="nooptimize"></a>
+.SS "Optimizations that affect backtracking verbs"
+.rs
+.sp
+PCRE contains some optimizations that are used to speed up matching by running
+some checks at the start of each match attempt. For example, it may know the
+minimum length of matching subject, or that a particular character must be
+present. When one of these optimizations suppresses the running of a match, any
+included backtracking verbs will not, of course, be processed. You can suppress
+the start-of-match optimizations by setting the PCRE_NO_START_OPTIMIZE option
+when calling \fBpcre_compile()\fP or \fBpcre_exec()\fP, or by starting the
+pattern with (*NO_START_OPT). There is more discussion of this option in the
+section entitled
+.\" HTML <a href="pcreapi.html#execoptions">
+.\" </a>
+"Option bits for \fBpcre_exec()\fP"
+.\"
+in the
+.\" HREF
+\fBpcreapi\fP
+.\"
+documentation.
+.P
+Experiments with Perl suggest that it too has similar optimizations, sometimes
+leading to anomalous results.
+.
+.
+.SS "Verbs that act immediately"
+.rs
+.sp
+The following verbs act as soon as they are encountered. They may not be
+followed by a name.
+.sp
+   (*ACCEPT)
+.sp
+This verb causes the match to end successfully, skipping the remainder of the
+pattern. However, when it is inside a subpattern that is called as a
+subroutine, only that subpattern is ended successfully. Matching then continues
+at the outer level. If (*ACCEPT) is inside capturing parentheses, the data so
+far is captured. For example:
+.sp
+  A((?:A|B(*ACCEPT)|C)D)
+.sp
+This matches "AB", "AAD", or "ACD"; when it matches "AB", "B" is captured by
+the outer parentheses.
+.sp
+  (*FAIL) or (*F)
+.sp
+This verb causes a matching failure, forcing backtracking to occur. It is
+equivalent to (?!) but easier to read. The Perl documentation notes that it is
+probably useful only when combined with (?{}) or (??{}). Those are, of course,
+Perl features that are not present in PCRE. The nearest equivalent is the
+callout feature, as for example in this pattern:
+.sp
+  a+(?C)(*FAIL)
+.sp
+A match with the string "aaaa" always fails, but the callout is taken before
+each backtrack happens (in this example, 10 times).
+.
+.
+.SS "Recording which path was taken"
+.rs
+.sp
+There is one verb whose main purpose is to track how a match was arrived at,
+though it also has a secondary use in conjunction with advancing the match
+starting point (see (*SKIP) below).
+.sp
+  (*MARK:NAME) or (*:NAME)
+.sp
+A name is always required with this verb. There may be as many instances of
+(*MARK) as you like in a pattern, and their names do not have to be unique.
+.P
+When a match succeeds, the name of the last-encountered (*MARK) on the matching
+path is passed back to the caller as described in the section entitled
+.\" HTML <a href="pcreapi.html#extradata">
+.\" </a>
+"Extra data for \fBpcre_exec()\fP"
+.\"
+in the
+.\" HREF
+\fBpcreapi\fP
+.\"
+documentation. Here is an example of \fBpcretest\fP output, where the /K
+modifier requests the retrieval and outputting of (*MARK) data:
+.sp
+    re> /X(*MARK:A)Y|X(*MARK:B)Z/K
+  data> XY
+   0: XY
+  MK: A
+  XZ
+   0: XZ
+  MK: B
+.sp
+The (*MARK) name is tagged with "MK:" in this output, and in this example it
+indicates which of the two alternatives matched. This is a more efficient way
+of obtaining this information than putting each alternative in its own
+capturing parentheses.
+.P
+If (*MARK) is encountered in a positive assertion, its name is recorded and
+passed back if it is the last-encountered. This does not happen for negative
+assertions.
+.P
+After a partial match or a failed match, the name of the last encountered
+(*MARK) in the entire match process is returned. For example:
+.sp
+    re> /X(*MARK:A)Y|X(*MARK:B)Z/K
+  data> XP
+  No match, mark = B
+.sp
+Note that in this unanchored example the mark is retained from the match
+attempt that started at the letter "X" in the subject. Subsequent match
+attempts starting at "P" and then with an empty string do not get as far as the
+(*MARK) item, but nevertheless do not reset it.
+.P
+If you are interested in (*MARK) values after failed matches, you should
+probably set the PCRE_NO_START_OPTIMIZE option
+.\" HTML <a href="#nooptimize">
+.\" </a>
+(see above)
+.\"
+to ensure that the match is always attempted.
+.
+.
+.SS "Verbs that act after backtracking"
+.rs
+.sp
+The following verbs do nothing when they are encountered. Matching continues
+with what follows, but if there is no subsequent match, causing a backtrack to
+the verb, a failure is forced. That is, backtracking cannot pass to the left of
+the verb. However, when one of these verbs appears inside an atomic group, its
+effect is confined to that group, because once the group has been matched,
+there is never any backtracking into it. In this situation, backtracking can
+"jump back" to the left of the entire atomic group. (Remember also, as stated
+above, that this localization also applies in subroutine calls and assertions.)
+.P
+These verbs differ in exactly what kind of failure occurs when backtracking
+reaches them.
+.sp
+  (*COMMIT)
+.sp
+This verb, which may not be followed by a name, causes the whole match to fail
+outright if the rest of the pattern does not match. Even if the pattern is
+unanchored, no further attempts to find a match by advancing the starting point
+take place. Once (*COMMIT) has been passed, \fBpcre_exec()\fP is committed to
+finding a match at the current starting point, or not at all. For example:
+.sp
+  a+(*COMMIT)b
+.sp
+This matches "xxaab" but not "aacaab". It can be thought of as a kind of
+dynamic anchor, or "I've started, so I must finish." The name of the most
+recently passed (*MARK) in the path is passed back when (*COMMIT) forces a
+match failure.
+.P
+Note that (*COMMIT) at the start of a pattern is not the same as an anchor,
+unless PCRE's start-of-match optimizations are turned off, as shown in this
+\fBpcretest\fP example:
+.sp
+    re> /(*COMMIT)abc/
+  data> xyzabc
+   0: abc
+  xyzabc\eY
+  No match
+.sp
+PCRE knows that any match must start with "a", so the optimization skips along
+the subject to "a" before running the first match attempt, which succeeds. When
+the optimization is disabled by the \eY escape in the second subject, the match
+starts at "x" and so the (*COMMIT) causes it to fail without trying any other
+starting points.
+.sp
+  (*PRUNE) or (*PRUNE:NAME)
+.sp
+This verb causes the match to fail at the current starting position in the
+subject if the rest of the pattern does not match. If the pattern is
+unanchored, the normal "bumpalong" advance to the next starting character then
+happens. Backtracking can occur as usual to the left of (*PRUNE), before it is
+reached, or when matching to the right of (*PRUNE), but if there is no match to
+the right, backtracking cannot cross (*PRUNE). In simple cases, the use of
+(*PRUNE) is just an alternative to an atomic group or possessive quantifier,
+but there are some uses of (*PRUNE) that cannot be expressed in any other way.
+The behaviour of (*PRUNE:NAME) is the same as (*MARK:NAME)(*PRUNE). In an
+anchored pattern (*PRUNE) has the same effect as (*COMMIT).
+.sp
+  (*SKIP)
+.sp
+This verb, when given without a name, is like (*PRUNE), except that if the
+pattern is unanchored, the "bumpalong" advance is not to the next character,
+but to the position in the subject where (*SKIP) was encountered. (*SKIP)
+signifies that whatever text was matched leading up to it cannot be part of a
+successful match. Consider:
+.sp
+  a+(*SKIP)b
+.sp
+If the subject is "aaaac...", after the first match attempt fails (starting at
+the first character in the string), the starting point skips on to start the
+next attempt at "c". Note that a possessive quantifer does not have the same
+effect as this example; although it would suppress backtracking during the
+first match attempt, the second attempt would start at the second character
+instead of skipping on to "c".
+.sp
+  (*SKIP:NAME)
+.sp
+When (*SKIP) has an associated name, its behaviour is modified. If the
+following pattern fails to match, the previous path through the pattern is
+searched for the most recent (*MARK) that has the same name. If one is found,
+the "bumpalong" advance is to the subject position that corresponds to that
+(*MARK) instead of to where (*SKIP) was encountered. If no (*MARK) with a
+matching name is found, the (*SKIP) is ignored.
+.sp
+  (*THEN) or (*THEN:NAME)
+.sp
+This verb causes a skip to the next innermost alternative if the rest of the
+pattern does not match. That is, it cancels pending backtracking, but only
+within the current alternative. Its name comes from the observation that it can
+be used for a pattern-based if-then-else block:
+.sp
+  ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...
+.sp
+If the COND1 pattern matches, FOO is tried (and possibly further items after
+the end of the group if FOO succeeds); on failure, the matcher skips to the
+second alternative and tries COND2, without backtracking into COND1. The
+behaviour of (*THEN:NAME) is exactly the same as (*MARK:NAME)(*THEN).
+If (*THEN) is not inside an alternation, it acts like (*PRUNE).
+.P
+Note that a subpattern that does not contain a | character is just a part of
+the enclosing alternative; it is not a nested alternation with only one
+alternative. The effect of (*THEN) extends beyond such a subpattern to the
+enclosing alternative. Consider this pattern, where A, B, etc. are complex
+pattern fragments that do not contain any | characters at this level:
+.sp
+  A (B(*THEN)C) | D
+.sp
+If A and B are matched, but there is a failure in C, matching does not
+backtrack into A; instead it moves to the next alternative, that is, D.
+However, if the subpattern containing (*THEN) is given an alternative, it
+behaves differently:
+.sp
+  A (B(*THEN)C | (*FAIL)) | D
+.sp
+The effect of (*THEN) is now confined to the inner subpattern. After a failure
+in C, matching moves to (*FAIL), which causes the whole subpattern to fail
+because there are no more alternatives to try. In this case, matching does now
+backtrack into A.
+.P
+Note also that a conditional subpattern is not considered as having two
+alternatives, because only one is ever used. In other words, the | character in
+a conditional subpattern has a different meaning. Ignoring white space,
+consider:
+.sp
+  ^.*? (?(?=a) a | b(*THEN)c )
+.sp
+If the subject is "ba", this pattern does not match. Because .*? is ungreedy,
+it initially matches zero characters. The condition (?=a) then fails, the
+character "b" is matched, but "c" is not. At this point, matching does not
+backtrack to .*? as might perhaps be expected from the presence of the |
+character. The conditional subpattern is part of the single alternative that
+comprises the whole pattern, and so the match fails. (If there was a backtrack
+into .*?, allowing it to match "b", the match would succeed.)
+.P
+The verbs just described provide four different "strengths" of control when
+subsequent matching fails. (*THEN) is the weakest, carrying on the match at the
+next alternative. (*PRUNE) comes next, failing the match at the current
+starting position, but allowing an advance to the next character (for an
+unanchored pattern). (*SKIP) is similar, except that the advance may be more
+than one character. (*COMMIT) is the strongest, causing the entire match to
+fail.
+.P
+If more than one such verb is present in a pattern, the "strongest" one wins.
+For example, consider this pattern, where A, B, etc. are complex pattern
+fragments:
+.sp
+  (A(*COMMIT)B(*THEN)C|D)
+.sp
+Once A has matched, PCRE is committed to this match, at the current starting
+position. If subsequently B matches, but C does not, the normal (*THEN) action
+of trying the next alternative (that is, D) does not happen because (*COMMIT)
+overrides.
+.
+.
+.SH "SEE ALSO"
+.rs
+.sp
+\fBpcreapi\fP(3), \fBpcrecallout\fP(3), \fBpcrematching\fP(3),
+\fBpcresyntax\fP(3), \fBpcre\fP(3), \fBpcre16(3)\fP, \fBpcre32(3)\fP.
+.
+.
+.SH AUTHOR
+.rs
+.sp
+.nf
+Philip Hazel
+University Computing Service
+Cambridge CB2 3QH, England.
+.fi
+.
+.
+.SH REVISION
+.rs
+.sp
+.nf
+Last updated: 11 November 2012
+Copyright (c) 1997-2012 University of Cambridge.
+.fi