esruby 0.0.0

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/perltest.pl

@@ -0,0 +1,237 @@
+#! /usr/bin/env perl
+
+# Program for testing regular expressions with perl to check that PCRE handles
+# them the same. This version supports /8 for UTF-8 testing. However, it needs
+# to have "use utf8" at the start for running the UTF-8 tests, but *not* for
+# the other tests. The only way I've found for doing this is to cat this line
+# in explicitly in the RunPerlTest script. I've also used this method to supply
+# "require Encode" for the UTF-8 tests, so that the main test will still run
+# where Encode is not installed.
+
+# use locale;  # With this included, \x0b matches \s!
+
+# Function for turning a string into a string of printing chars.
+
+#use utf8;
+#require Encode;
+
+sub pchars {
+my($t) = "";
+
+if ($utf8)
+  {
+  @p = unpack('U*', $_[0]);
+  foreach $c (@p)
+    {
+    if ($c >= 32 && $c < 127) { $t .= chr $c; }
+      else { $t .= sprintf("\\x{%02x}", $c);
+      }
+    }
+  }
+else
+  {
+  foreach $c (split(//, $_[0]))
+    {
+    if (ord $c >= 32 && ord $c < 127) { $t .= $c; }
+      else { $t .= sprintf("\\x%02x", ord $c); }
+    }
+  }
+
+$t;
+}
+
+
+# Read lines from named file or stdin and write to named file or stdout; lines
+# consist of a regular expression, in delimiters and optionally followed by
+# options, followed by a set of test data, terminated by an empty line.
+
+# Sort out the input and output files
+
+if (@ARGV > 0)
+  {
+  open(INFILE, "<$ARGV[0]") || die "Failed to open $ARGV[0]\n";
+  $infile = "INFILE";
+  }
+else { $infile = "STDIN"; }
+
+if (@ARGV > 1)
+  {
+  open(OUTFILE, ">$ARGV[1]") || die "Failed to open $ARGV[1]\n";
+  $outfile = "OUTFILE";
+  }
+else { $outfile = "STDOUT"; }
+
+printf($outfile "Perl $] Regular Expressions\n\n");
+
+# Main loop
+
+NEXT_RE:
+for (;;)
+  {
+  printf "  re> " if $infile eq "STDIN";
+  last if ! ($_ = <$infile>);
+  printf $outfile "$_" if $infile ne "STDIN";
+  next if ($_ eq "");
+
+  $pattern = $_;
+
+  while ($pattern !~ /^\s*(.).*\1/s)
+    {
+    printf "    > " if $infile eq "STDIN";
+    last if ! ($_ = <$infile>);
+    printf $outfile "$_" if $infile ne "STDIN";
+    $pattern .= $_;
+    }
+
+   chomp($pattern);
+   $pattern =~ s/\s+$//;
+
+  # The private /+ modifier means "print $' afterwards".
+
+  $showrest = ($pattern =~ s/\+(?=[a-zA-Z]*$)//);
+
+  # A doubled version is used by pcretest to print remainders after captures
+
+  $pattern =~ s/\+(?=[a-zA-Z]*$)//;
+
+  # Remove /8 from a UTF-8 pattern.
+
+  $utf8 = $pattern =~ s/8(?=[a-zA-Z]*$)//;
+
+  # Remove /J from a pattern with duplicate names.
+
+  $pattern =~ s/J(?=[a-zA-Z]*$)//;
+
+  # Remove /K from a pattern (asks pcretest to check MARK data) */
+
+  $pattern =~ s/K(?=[a-zA-Z]*$)//;
+
+  # Remove /W from a pattern (asks pcretest to set PCRE_UCP)
+
+  $pattern =~ s/W(?=[a-zA-Z]*$)//;
+
+  # Remove /S or /SS from a pattern (asks pcretest to study or not to study)
+
+  $pattern =~ s/S(?=[a-zA-Z]*$)//g;
+
+  # Remove /Y from a pattern (asks pcretest to disable PCRE optimization)
+
+  $pattern =~ s/Y(?=[a-zA-Z]*$)//;
+
+  # Check that the pattern is valid
+
+  eval "\$_ =~ ${pattern}";
+  if ($@)
+    {
+    printf $outfile "Error: $@";
+    next NEXT_RE;
+    }
+
+  # If the /g modifier is present, we want to put a loop round the matching;
+  # otherwise just a single "if".
+
+  $cmd = ($pattern =~ /g[a-z]*$/)? "while" : "if";
+
+  # If the pattern is actually the null string, Perl uses the most recently
+  # executed (and successfully compiled) regex is used instead. This is a
+  # nasty trap for the unwary! The PCRE test suite does contain null strings
+  # in places - if they are allowed through here all sorts of weird and
+  # unexpected effects happen. To avoid this, we replace such patterns with
+  # a non-null pattern that has the same effect.
+
+  $pattern = "/(?#)/$2" if ($pattern =~ /^(.)\1(.*)$/);
+
+  # Read data lines and test them
+
+  for (;;)
+    {
+    printf "data> " if $infile eq "STDIN";
+    last NEXT_RE if ! ($_ = <$infile>);
+    chomp;
+    printf $outfile "$_\n" if $infile ne "STDIN";
+
+    s/\s+$//;  # Remove trailing space
+    s/^\s+//;  # Remove leading space
+    s/\\Y//g;  # Remove \Y (pcretest flag to set PCRE_NO_START_OPTIMIZE)
+
+    last if ($_ eq "");
+    $x = eval "\"$_\"";   # To get escapes processed
+
+    # Empty array for holding results, ensure $REGERROR and $REGMARK are
+    # unset, then do the matching.
+
+    @subs = ();
+
+    $pushes = "push \@subs,\$&;" .
+         "push \@subs,\$1;" .
+         "push \@subs,\$2;" .
+         "push \@subs,\$3;" .
+         "push \@subs,\$4;" .
+         "push \@subs,\$5;" .
+         "push \@subs,\$6;" .
+         "push \@subs,\$7;" .
+         "push \@subs,\$8;" .
+         "push \@subs,\$9;" .
+         "push \@subs,\$10;" .
+         "push \@subs,\$11;" .
+         "push \@subs,\$12;" .
+         "push \@subs,\$13;" .
+         "push \@subs,\$14;" .
+         "push \@subs,\$15;" .
+         "push \@subs,\$16;" .
+         "push \@subs,\$'; }";
+
+    undef $REGERROR;
+    undef $REGMARK;
+
+    eval "${cmd} (\$x =~ ${pattern}) {" . $pushes;
+
+    if ($@)
+      {
+      printf $outfile "Error: $@\n";
+      next NEXT_RE;
+      }
+    elsif (scalar(@subs) == 0)
+      {
+      printf $outfile "No match";
+      if (defined $REGERROR && $REGERROR != 1)
+        { printf $outfile (", mark = %s", &pchars($REGERROR)); }
+      printf $outfile "\n";
+      }
+    else
+      {
+      while (scalar(@subs) != 0)
+        {
+        printf $outfile (" 0: %s\n", &pchars($subs[0]));
+        printf $outfile (" 0+ %s\n", &pchars($subs[17])) if $showrest;
+        $last_printed = 0;
+        for ($i = 1; $i <= 16; $i++)
+          {
+          if (defined $subs[$i])
+            {
+            while ($last_printed++ < $i-1)
+              { printf $outfile ("%2d: <unset>\n", $last_printed); }
+            printf $outfile ("%2d: %s\n", $i, &pchars($subs[$i]));
+            $last_printed = $i;
+            }
+          }
+        splice(@subs, 0, 18);
+        }
+
+      # It seems that $REGMARK is not marked as UTF-8 even when use utf8 is
+      # set and the input pattern was a UTF-8 string. We can, however, force
+      # it to be so marked.
+
+      if (defined $REGMARK && $REGMARK != 1)
+        {
+        $xx = $REGMARK;
+        $xx = Encode::decode_utf8($xx) if $utf8;
+        printf $outfile ("MK: %s\n", &pchars($xx));
+        }
+      }
+    }
+  }
+
+# printf $outfile "\n";
+
+# End

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/sljit/sljitConfig.h

@@ -0,0 +1,110 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SLJIT_CONFIG_H_
+#define _SLJIT_CONFIG_H_
+
+/* --------------------------------------------------------------------- */
+/*  Custom defines                                                       */
+/* --------------------------------------------------------------------- */
+
+/* Put your custom defines here. This empty section will never change
+   which helps maintaining patches (with diff / patch utilities). */
+
+/* --------------------------------------------------------------------- */
+/*  Architecture                                                         */
+/* --------------------------------------------------------------------- */
+
+/* Architecture selection. */
+/* #define SLJIT_CONFIG_X86_32 1 */
+/* #define SLJIT_CONFIG_X86_64 1 */
+/* #define SLJIT_CONFIG_ARM_V5 1 */
+/* #define SLJIT_CONFIG_ARM_V7 1 */
+/* #define SLJIT_CONFIG_ARM_THUMB2 1 */
+/* #define SLJIT_CONFIG_PPC_32 1 */
+/* #define SLJIT_CONFIG_PPC_64 1 */
+/* #define SLJIT_CONFIG_MIPS_32 1 */
+/* #define SLJIT_CONFIG_SPARC_32 1 */
+
+/* #define SLJIT_CONFIG_AUTO 1 */
+/* #define SLJIT_CONFIG_UNSUPPORTED 1 */
+
+/* --------------------------------------------------------------------- */
+/*  Utilities                                                            */
+/* --------------------------------------------------------------------- */
+
+/* Useful for thread-safe compiling of global functions. */
+#ifndef SLJIT_UTIL_GLOBAL_LOCK
+/* Enabled by default */
+#define SLJIT_UTIL_GLOBAL_LOCK 1
+#endif
+
+/* Implements a stack like data structure (by using mmap / VirtualAlloc). */
+#ifndef SLJIT_UTIL_STACK
+/* Enabled by default */
+#define SLJIT_UTIL_STACK 1
+#endif
+
+/* Single threaded application. Does not require any locks. */
+#ifndef SLJIT_SINGLE_THREADED
+/* Disabled by default. */
+#define SLJIT_SINGLE_THREADED 0
+#endif
+
+/* --------------------------------------------------------------------- */
+/*  Configuration                                                        */
+/* --------------------------------------------------------------------- */
+
+/* If SLJIT_STD_MACROS_DEFINED is not defined, the application should
+   define SLJIT_MALLOC, SLJIT_FREE, SLJIT_MEMMOVE, and NULL. */
+#ifndef SLJIT_STD_MACROS_DEFINED
+/* Disabled by default. */
+#define SLJIT_STD_MACROS_DEFINED 0
+#endif
+
+/* Executable code allocation:
+   If SLJIT_EXECUTABLE_ALLOCATOR is not defined, the application should
+   define both SLJIT_MALLOC_EXEC and SLJIT_FREE_EXEC. */
+#ifndef SLJIT_EXECUTABLE_ALLOCATOR
+/* Enabled by default. */
+#define SLJIT_EXECUTABLE_ALLOCATOR 1
+#endif
+
+/* Debug checks (assertions, etc.). */
+#ifndef SLJIT_DEBUG
+/* Enabled by default */
+#define SLJIT_DEBUG 1
+#endif
+
+/* Verbose operations */
+#ifndef SLJIT_VERBOSE
+/* Enabled by default */
+#define SLJIT_VERBOSE 1
+#endif
+
+/* See the beginning of sljitConfigInternal.h */
+
+#endif

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/sljit/sljitConfigInternal.h

@@ -0,0 +1,484 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SLJIT_CONFIG_INTERNAL_H_
+#define _SLJIT_CONFIG_INTERNAL_H_
+
+/*
+   SLJIT defines the following macros depending on the target architecture:
+
+   Feature detection (boolean) macros:
+   SLJIT_32BIT_ARCHITECTURE : 32 bit architecture
+   SLJIT_64BIT_ARCHITECTURE : 64 bit architecture
+   SLJIT_WORD_SHIFT : the shift required to apply when accessing a sljit_sw/sljit_uw array by index
+   SLJIT_DOUBLE_SHIFT : the shift required to apply when accessing a double array by index
+   SLJIT_LITTLE_ENDIAN : little endian architecture
+   SLJIT_BIG_ENDIAN : big endian architecture
+   SLJIT_UNALIGNED : allows unaligned memory accesses for non-fpu operations (only!)
+   SLJIT_INDIRECT_CALL : see SLJIT_FUNC_OFFSET() for more information
+   SLJIT_RETURN_ADDRESS_OFFSET : a return instruction always adds this offset to the return address
+
+   Types and useful macros:
+   sljit_sb, sljit_ub : signed and unsigned 8 bit byte
+   sljit_sh, sljit_uh : signed and unsigned 16 bit half-word (short) type
+   sljit_si, sljit_ui : signed and unsigned 32 bit integer type
+   sljit_sw, sljit_uw : signed and unsigned machine word, enough to store a pointer
+   sljit_p : unsgined pointer value (usually the same as sljit_uw, but
+             some 64 bit ABIs may use 32 bit pointers)
+   sljit_s : single precision floating point value
+   sljit_d : double precision floating point value
+   SLJIT_CALL : C calling convention define for both calling JIT form C and C callbacks for JIT
+   SLJIT_W(number) : defining 64 bit constants on 64 bit architectures (compiler independent helper)
+*/
+
+#if !((defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
+	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+	|| (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
+	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
+	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
+	|| (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
+	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
+	|| (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
+	|| (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED))
+#error "An architecture must be selected"
+#endif
+
+/* Sanity check. */
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
+	+ (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+	+ (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) \
+	+ (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
+	+ (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+	+ (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
+	+ (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
+	+ (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32) \
+	+ (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32) \
+	+ (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO) \
+	+ (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED) >= 2
+#error "Multiple architectures are selected"
+#endif
+
+/* Auto select option (requires compiler support) */
+#if (defined SLJIT_CONFIG_AUTO && SLJIT_CONFIG_AUTO)
+
+#ifndef _WIN32
+
+#if defined(__i386__) || defined(__i386)
+#define SLJIT_CONFIG_X86_32 1
+#elif defined(__x86_64__)
+#define SLJIT_CONFIG_X86_64 1
+#elif defined(__arm__) || defined(__ARM__)
+#ifdef __thumb2__
+#define SLJIT_CONFIG_ARM_THUMB2 1
+#elif defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) || defined(__ARM_ARCH_7R__)
+#define SLJIT_CONFIG_ARM_V7 1
+#else
+#define SLJIT_CONFIG_ARM_V5 1
+#endif
+#elif defined(__ppc64__) || defined(__powerpc64__) || defined(_ARCH_PPC64) || (defined(_POWER) && defined(__64BIT__))
+#define SLJIT_CONFIG_PPC_64 1
+#elif defined(__ppc__) || defined(__powerpc__) || defined(_ARCH_PPC) || defined(_ARCH_PWR) || defined(_ARCH_PWR2) || defined(_POWER)
+#define SLJIT_CONFIG_PPC_32 1
+#elif defined(__mips__)
+#define SLJIT_CONFIG_MIPS_32 1
+#elif defined(__sparc__) || defined(__sparc)
+#define SLJIT_CONFIG_SPARC_32 1
+#else
+/* Unsupported architecture */
+#define SLJIT_CONFIG_UNSUPPORTED 1
+#endif
+
+#else /* !_WIN32 */
+
+#if defined(_M_X64) || defined(__x86_64__)
+#define SLJIT_CONFIG_X86_64 1
+#elif defined(_ARM_)
+#define SLJIT_CONFIG_ARM_V5 1
+#else
+#define SLJIT_CONFIG_X86_32 1
+#endif
+
+#endif /* !WIN32 */
+#endif /* SLJIT_CONFIG_AUTO */
+
+#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+#undef SLJIT_EXECUTABLE_ALLOCATOR
+#endif
+
+#if !(defined SLJIT_STD_MACROS_DEFINED && SLJIT_STD_MACROS_DEFINED)
+
+/* These libraries are needed for the macros below. */
+#include <stdlib.h>
+#include <string.h>
+
+#endif /* STD_MACROS_DEFINED */
+
+/* General macros:
+   Note: SLJIT is designed to be independent from them as possible.
+
+   In release mode (SLJIT_DEBUG is not defined) only the following macros are needed:
+*/
+
+#ifndef SLJIT_MALLOC
+#define SLJIT_MALLOC(size) malloc(size)
+#endif
+
+#ifndef SLJIT_FREE
+#define SLJIT_FREE(ptr) free(ptr)
+#endif
+
+#ifndef SLJIT_MEMMOVE
+#define SLJIT_MEMMOVE(dest, src, len) memmove(dest, src, len)
+#endif
+
+#ifndef SLJIT_ZEROMEM
+#define SLJIT_ZEROMEM(dest, len) memset(dest, 0, len)
+#endif
+
+#if !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY)
+
+#if defined(__GNUC__) && (__GNUC__ >= 3)
+#define SLJIT_LIKELY(x)		__builtin_expect((x), 1)
+#define SLJIT_UNLIKELY(x)	__builtin_expect((x), 0)
+#else
+#define SLJIT_LIKELY(x)		(x)
+#define SLJIT_UNLIKELY(x)	(x)
+#endif
+
+#endif /* !defined(SLJIT_LIKELY) && !defined(SLJIT_UNLIKELY) */
+
+#ifndef SLJIT_INLINE
+/* Inline functions. */
+#define SLJIT_INLINE __inline
+#endif
+
+#ifndef SLJIT_CONST
+/* Const variables. */
+#define SLJIT_CONST const
+#endif
+
+#ifndef SLJIT_UNUSED_ARG
+/* Unused arguments. */
+#define SLJIT_UNUSED_ARG(arg) (void)arg
+#endif
+
+#if (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC)
+/* Static ABI functions. For all-in-one programs. */
+
+#if defined(__GNUC__)
+/* Disable unused warnings in gcc. */
+#define SLJIT_API_FUNC_ATTRIBUTE static __attribute__((unused))
+#else
+#define SLJIT_API_FUNC_ATTRIBUTE static
+#endif
+
+#else
+#define SLJIT_API_FUNC_ATTRIBUTE
+#endif /* (defined SLJIT_CONFIG_STATIC && SLJIT_CONFIG_STATIC) */
+
+#ifndef SLJIT_CACHE_FLUSH
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+
+/* Not required to implement on archs with unified caches. */
+#define SLJIT_CACHE_FLUSH(from, to)
+
+#elif defined __APPLE__
+
+/* Supported by all macs since Mac OS 10.5.
+   However, it does not work on non-jailbroken iOS devices,
+   although the compilation is successful. */
+
+#define SLJIT_CACHE_FLUSH(from, to) \
+	sys_icache_invalidate((char*)(from), (char*)(to) - (char*)(from))
+
+#elif (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+
+/* The __clear_cache() implementation of GCC is a dummy function on PowerPC. */
+#define SLJIT_CACHE_FLUSH(from, to) \
+	ppc_cache_flush((from), (to))
+
+#elif (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+
+/* The __clear_cache() implementation of GCC is a dummy function on Sparc. */
+#define SLJIT_CACHE_FLUSH(from, to) \
+	sparc_cache_flush((from), (to))
+
+#else
+
+/* Calls __ARM_NR_cacheflush on ARM-Linux. */
+#define SLJIT_CACHE_FLUSH(from, to) \
+	__clear_cache((char*)(from), (char*)(to))
+
+#endif
+
+#endif /* !SLJIT_CACHE_FLUSH */
+
+/* 8 bit byte type. */
+typedef unsigned char sljit_ub;
+typedef signed char sljit_sb;
+
+/* 16 bit half-word type. */
+typedef unsigned short int sljit_uh;
+typedef signed short int sljit_sh;
+
+/* 32 bit integer type. */
+typedef unsigned int sljit_ui;
+typedef signed int sljit_si;
+
+/* Machine word type. Can encapsulate a pointer.
+     32 bit for 32 bit machines.
+     64 bit for 64 bit machines. */
+#if (defined SLJIT_CONFIG_UNSUPPORTED && SLJIT_CONFIG_UNSUPPORTED)
+/* Just to have something. */
+#define SLJIT_WORD_SHIFT 0
+typedef unsigned long int sljit_uw;
+typedef long int sljit_sw;
+#elif !(defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) && !(defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#define SLJIT_32BIT_ARCHITECTURE 1
+#define SLJIT_WORD_SHIFT 2
+typedef unsigned int sljit_uw;
+typedef int sljit_sw;
+#else
+#define SLJIT_64BIT_ARCHITECTURE 1
+#define SLJIT_WORD_SHIFT 3
+#ifdef _WIN32
+typedef unsigned __int64 sljit_uw;
+typedef __int64 sljit_sw;
+#else
+typedef unsigned long int sljit_uw;
+typedef long int sljit_sw;
+#endif
+#endif
+
+typedef sljit_uw sljit_p;
+
+/* Floating point types. */
+typedef float sljit_s;
+typedef double sljit_d;
+
+/* Shift for pointer sized data. */
+#define SLJIT_POINTER_SHIFT SLJIT_WORD_SHIFT
+
+/* Shift for double precision sized data. */
+#define SLJIT_DOUBLE_SHIFT 3
+
+#ifndef SLJIT_W
+
+/* Defining long constants. */
+#if (defined SLJIT_64BIT_ARCHITECTURE && SLJIT_64BIT_ARCHITECTURE)
+#define SLJIT_W(w)	(w##ll)
+#else
+#define SLJIT_W(w)	(w)
+#endif
+
+#endif /* !SLJIT_W */
+
+#ifndef SLJIT_CALL
+
+/* ABI (Application Binary Interface) types. */
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+
+#if defined(__GNUC__)
+
+#define SLJIT_CALL __attribute__ ((fastcall))
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(_MSC_VER)
+
+#define SLJIT_CALL __fastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#elif defined(__BORLANDC__)
+
+#define SLJIT_CALL __msfastcall
+#define SLJIT_X86_32_FASTCALL 1
+
+#else /* Unknown compiler. */
+
+/* The cdecl attribute is the default. */
+#define SLJIT_CALL
+
+#endif
+
+#else /* Non x86-32 architectures. */
+
+#define SLJIT_CALL
+
+#endif /* SLJIT_CONFIG_X86_32 */
+
+#endif /* !SLJIT_CALL */
+
+#if !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN)
+
+/* These macros are useful for the application. */
+#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) \
+	|| (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+#define SLJIT_BIG_ENDIAN 1
+
+#elif (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+
+#ifdef __MIPSEL__
+#define SLJIT_LITTLE_ENDIAN 1
+#else
+#define SLJIT_BIG_ENDIAN 1
+#endif
+
+#else
+#define SLJIT_LITTLE_ENDIAN 1
+#endif
+
+#endif /* !defined(SLJIT_BIG_ENDIAN) && !defined(SLJIT_LITTLE_ENDIAN) */
+
+/* Sanity check. */
+#if (defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && (defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
+#error "Exactly one endianness must be selected"
+#endif
+
+#if !(defined SLJIT_BIG_ENDIAN && SLJIT_BIG_ENDIAN) && !(defined SLJIT_LITTLE_ENDIAN && SLJIT_LITTLE_ENDIAN)
+#error "Exactly one endianness must be selected"
+#endif
+
+#ifndef SLJIT_INDIRECT_CALL
+#if (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64) || (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32 && defined _AIX)
+/* It seems certain ppc compilers use an indirect addressing for functions
+   which makes things complicated. */
+#define SLJIT_INDIRECT_CALL 1
+#endif
+#endif /* SLJIT_INDIRECT_CALL */
+
+#ifndef SLJIT_RETURN_ADDRESS_OFFSET
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+#define SLJIT_RETURN_ADDRESS_OFFSET 8
+#else
+#define SLJIT_RETURN_ADDRESS_OFFSET 0
+#endif
+#endif /* SLJIT_RETURN_ADDRESS_OFFSET */
+
+#ifndef SLJIT_SSE2
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+/* Turn on SSE2 support on x86. */
+#define SLJIT_SSE2 1
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+/* Auto detect SSE2 support using CPUID.
+   On 64 bit x86 cpus, sse2 must be present. */
+#define SLJIT_DETECT_SSE2 1
+#endif
+
+#endif /* (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) */
+
+#endif /* !SLJIT_SSE2 */
+
+#ifndef SLJIT_UNALIGNED
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) \
+	|| (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64) \
+	|| (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7) \
+	|| (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2) \
+	|| (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) \
+	|| (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+#define SLJIT_UNALIGNED 1
+#endif
+
+#endif /* !SLJIT_UNALIGNED */
+
+#if (defined SLJIT_EXECUTABLE_ALLOCATOR && SLJIT_EXECUTABLE_ALLOCATOR)
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_malloc_exec(sljit_uw size);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_exec(void* ptr);
+#define SLJIT_MALLOC_EXEC(size) sljit_malloc_exec(size)
+#define SLJIT_FREE_EXEC(ptr) sljit_free_exec(ptr)
+#endif
+
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+#include <stdio.h>
+#endif
+
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+
+#if !defined(SLJIT_ASSERT) || !defined(SLJIT_ASSERT_STOP)
+
+/* SLJIT_HALT_PROCESS must halt the process. */
+#ifndef SLJIT_HALT_PROCESS
+#include <stdlib.h>
+
+#define SLJIT_HALT_PROCESS() \
+	abort();
+#endif /* !SLJIT_HALT_PROCESS */
+
+#include <stdio.h>
+
+#endif /* !SLJIT_ASSERT || !SLJIT_ASSERT_STOP */
+
+/* Feel free to redefine these two macros. */
+#ifndef SLJIT_ASSERT
+
+#define SLJIT_ASSERT(x) \
+	do { \
+		if (SLJIT_UNLIKELY(!(x))) { \
+			printf("Assertion failed at " __FILE__ ":%d\n", __LINE__); \
+			SLJIT_HALT_PROCESS(); \
+		} \
+	} while (0)
+
+#endif /* !SLJIT_ASSERT */
+
+#ifndef SLJIT_ASSERT_STOP
+
+#define SLJIT_ASSERT_STOP() \
+	do { \
+		printf("Should never been reached " __FILE__ ":%d\n", __LINE__); \
+		SLJIT_HALT_PROCESS(); \
+	} while (0)
+
+#endif /* !SLJIT_ASSERT_STOP */
+
+#else /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
+
+/* Forcing empty, but valid statements. */
+#undef SLJIT_ASSERT
+#undef SLJIT_ASSERT_STOP
+
+#define SLJIT_ASSERT(x) \
+	do { } while (0)
+#define SLJIT_ASSERT_STOP() \
+	do { } while (0)
+
+#endif /* (defined SLJIT_DEBUG && SLJIT_DEBUG) */
+
+#ifndef SLJIT_COMPILE_ASSERT
+
+/* Should be improved eventually. */
+#define SLJIT_COMPILE_ASSERT(x, description) \
+	SLJIT_ASSERT(x)
+
+#endif /* !SLJIT_COMPILE_ASSERT */
+
+#endif