esruby 0.0.0

data/resources/mruby/build/mrbgems/mruby-regexp-pcre/pcre/sljit/sljitLir.h

@@ -0,0 +1,985 @@
+/*
+ *    Stack-less Just-In-Time compiler
+ *
+ *    Copyright 2009-2012 Zoltan Herczeg (hzmester@freemail.hu). All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification, are
+ * permitted provided that the following conditions are met:
+ *
+ *   1. Redistributions of source code must retain the above copyright notice, this list of
+ *      conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form must reproduce the above copyright notice, this list
+ *      of conditions and the following disclaimer in the documentation and/or other materials
+ *      provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER(S) AND CONTRIBUTORS ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ * SHALL THE COPYRIGHT HOLDER(S) OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _SLJIT_LIR_H_
+#define _SLJIT_LIR_H_
+
+/*
+   ------------------------------------------------------------------------
+    Stack-Less JIT compiler for multiple architectures (x86, ARM, PowerPC)
+   ------------------------------------------------------------------------
+
+   Short description
+    Advantages:
+      - The execution can be continued from any LIR instruction. In other
+        words, it is possible to jump to any label from anywhere, even from
+        a code fragment, which is compiled later, if both compiled code
+        shares the same context. See sljit_emit_enter for more details
+      - Supports self modifying code: target of (conditional) jump and call
+        instructions and some constant values can be dynamically modified
+        during runtime
+        - although it is not suggested to do it frequently
+        - can be used for inline caching: save an important value once
+          in the instruction stream
+        - since this feature limits the optimization possibilities, a
+          special flag must be passed at compile time when these
+          instructions are emitted
+      - A fixed stack space can be allocated for local variables
+      - The compiler is thread-safe
+      - The compiler is highly configurable through preprocessor macros.
+        You can disable unneeded features (multithreading in single
+        threaded applications), and you can use your own system functions
+        (including memory allocators). See sljitConfig.h
+    Disadvantages:
+      - No automatic register allocation, and temporary results are
+        not stored on the stack. (hence the name comes)
+      - Limited number of registers (only 6+4 integer registers, max 3+2
+        scratch, max 3+2 saved and 6 floating point registers)
+    In practice:
+      - This approach is very effective for interpreters
+        - One of the saved registers typically points to a stack interface
+        - It can jump to any exception handler anytime (even if it belongs
+          to another function)
+        - Hot paths can be modified during runtime reflecting the changes
+          of the fastest execution path of the dynamic language
+        - SLJIT supports complex memory addressing modes
+        - mainly position and context independent code (except some cases)
+
+    For valgrind users:
+      - pass --smc-check=all argument to valgrind, since JIT is a "self-modifying code"
+*/
+
+#if !(defined SLJIT_NO_DEFAULT_CONFIG && SLJIT_NO_DEFAULT_CONFIG)
+#include "sljitConfig.h"
+#endif
+
+/* The following header file defines useful macros for fine tuning
+sljit based code generators. They are listed in the begining
+of sljitConfigInternal.h */
+
+#include "sljitConfigInternal.h"
+
+/* --------------------------------------------------------------------- */
+/*  Error codes                                                          */
+/* --------------------------------------------------------------------- */
+
+/* Indicates no error. */
+#define SLJIT_SUCCESS			0
+/* After the call of sljit_generate_code(), the error code of the compiler
+   is set to this value to avoid future sljit calls (in debug mode at least).
+   The complier should be freed after sljit_generate_code(). */
+#define SLJIT_ERR_COMPILED		1
+/* Cannot allocate non executable memory. */
+#define SLJIT_ERR_ALLOC_FAILED		2
+/* Cannot allocate executable memory.
+   Only for sljit_generate_code() */
+#define SLJIT_ERR_EX_ALLOC_FAILED	3
+/* return value for SLJIT_CONFIG_UNSUPPORTED empty architecture. */
+#define SLJIT_ERR_UNSUPPORTED		4
+
+/* --------------------------------------------------------------------- */
+/*  Registers                                                            */
+/* --------------------------------------------------------------------- */
+
+#define SLJIT_UNUSED		0
+
+/* Scratch (temporary) registers whose may not preserve their values
+   across function calls. */
+#define SLJIT_SCRATCH_REG1	1
+#define SLJIT_SCRATCH_REG2	2
+#define SLJIT_SCRATCH_REG3	3
+/* Note: extra registers cannot be used for memory addressing. */
+/* Note: on x86-32, these registers are emulated (using stack
+   loads & stores). */
+#define SLJIT_TEMPORARY_EREG1	4
+#define SLJIT_TEMPORARY_EREG2	5
+
+/* Saved registers whose preserve their values across function calls. */
+#define SLJIT_SAVED_REG1	6
+#define SLJIT_SAVED_REG2	7
+#define SLJIT_SAVED_REG3	8
+/* Note: extra registers cannot be used for memory addressing. */
+/* Note: on x86-32, these registers are emulated (using stack
+   loads & stores). */
+#define SLJIT_SAVED_EREG1	9
+#define SLJIT_SAVED_EREG2	10
+
+/* Read-only register (cannot be the destination of an operation).
+   Only SLJIT_MEM1(SLJIT_LOCALS_REG) addressing mode is allowed since
+   several ABIs has certain limitations about the stack layout. However
+   sljit_get_local_base() can be used to obtain the offset of a value
+   on the stack. */
+#define SLJIT_LOCALS_REG	11
+
+/* Number of registers. */
+#define SLJIT_NO_TMP_REGISTERS	5
+#define SLJIT_NO_GEN_REGISTERS	5
+#define SLJIT_NO_REGISTERS	11
+
+/* Return with machine word. */
+
+#define SLJIT_RETURN_REG	SLJIT_SCRATCH_REG1
+
+/* x86 prefers specific registers for special purposes. In case of shift
+   by register it supports only SLJIT_SCRATCH_REG3 for shift argument
+   (which is the src2 argument of sljit_emit_op2). If another register is
+   used, sljit must exchange data between registers which cause a minor
+   slowdown. Other architectures has no such limitation. */
+
+#define SLJIT_PREF_SHIFT_REG	SLJIT_SCRATCH_REG3
+
+/* --------------------------------------------------------------------- */
+/*  Floating point registers                                             */
+/* --------------------------------------------------------------------- */
+
+/* Note: SLJIT_UNUSED as destination is not valid for floating point
+     operations, since they cannot be used for setting flags. */
+
+/* Floating point operations are performed on double or
+   single precision values. */
+
+#define SLJIT_FLOAT_REG1	1
+#define SLJIT_FLOAT_REG2	2
+#define SLJIT_FLOAT_REG3	3
+#define SLJIT_FLOAT_REG4	4
+#define SLJIT_FLOAT_REG5	5
+#define SLJIT_FLOAT_REG6	6
+
+/* --------------------------------------------------------------------- */
+/*  Main structures and functions                                        */
+/* --------------------------------------------------------------------- */
+
+struct sljit_memory_fragment {
+	struct sljit_memory_fragment *next;
+	sljit_uw used_size;
+	/* Must be aligned to sljit_sw. */
+	sljit_ub memory[1];
+};
+
+struct sljit_label {
+	struct sljit_label *next;
+	sljit_uw addr;
+	/* The maximum size difference. */
+	sljit_uw size;
+};
+
+struct sljit_jump {
+	struct sljit_jump *next;
+	sljit_uw addr;
+	sljit_sw flags;
+	union {
+		sljit_uw target;
+		struct sljit_label* label;
+	} u;
+};
+
+struct sljit_const {
+	struct sljit_const *next;
+	sljit_uw addr;
+};
+
+struct sljit_compiler {
+	sljit_si error;
+
+	struct sljit_label *labels;
+	struct sljit_jump *jumps;
+	struct sljit_const *consts;
+	struct sljit_label *last_label;
+	struct sljit_jump *last_jump;
+	struct sljit_const *last_const;
+
+	struct sljit_memory_fragment *buf;
+	struct sljit_memory_fragment *abuf;
+
+	/* Used local registers. */
+	sljit_si scratches;
+	/* Used saved registers. */
+	sljit_si saveds;
+	/* Local stack size. */
+	sljit_si local_size;
+	/* Code size. */
+	sljit_uw size;
+	/* For statistical purposes. */
+	sljit_uw executable_size;
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32)
+	sljit_si args;
+	sljit_si locals_offset;
+	sljit_si scratches_start;
+	sljit_si saveds_start;
+#endif
+
+#if (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+	sljit_si mode32;
+#endif
+
+#if (defined SLJIT_CONFIG_X86_32 && SLJIT_CONFIG_X86_32) || (defined SLJIT_CONFIG_X86_64 && SLJIT_CONFIG_X86_64)
+	sljit_si flags_saved;
+#endif
+
+#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5)
+	/* Constant pool handling. */
+	sljit_uw *cpool;
+	sljit_ub *cpool_unique;
+	sljit_uw cpool_diff;
+	sljit_uw cpool_fill;
+	/* Other members. */
+	/* Contains pointer, "ldr pc, [...]" pairs. */
+	sljit_uw patches;
+#endif
+
+#if (defined SLJIT_CONFIG_ARM_V5 && SLJIT_CONFIG_ARM_V5) || (defined SLJIT_CONFIG_ARM_V7 && SLJIT_CONFIG_ARM_V7)
+	/* Temporary fields. */
+	sljit_uw shift_imm;
+	sljit_si cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_ARM_THUMB2 && SLJIT_CONFIG_ARM_THUMB2)
+	sljit_si cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_PPC_32 && SLJIT_CONFIG_PPC_32) || (defined SLJIT_CONFIG_PPC_64 && SLJIT_CONFIG_PPC_64)
+	sljit_sw imm;
+	sljit_si cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_MIPS_32 && SLJIT_CONFIG_MIPS_32)
+	sljit_si delay_slot;
+	sljit_si cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_CONFIG_SPARC_32 && SLJIT_CONFIG_SPARC_32)
+	sljit_si delay_slot;
+	sljit_si cache_arg;
+	sljit_sw cache_argw;
+#endif
+
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+	FILE* verbose;
+#endif
+
+#if (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	/* Local size passed to the functions. */
+	sljit_si logical_local_size;
+#endif
+
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE) || (defined SLJIT_DEBUG && SLJIT_DEBUG)
+	sljit_si skip_checks;
+#endif
+};
+
+/* --------------------------------------------------------------------- */
+/*  Main functions                                                       */
+/* --------------------------------------------------------------------- */
+
+/* Creates an sljit compiler.
+   Returns NULL if failed. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_compiler* sljit_create_compiler(void);
+
+/* Free everything except the compiled machine code. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_compiler(struct sljit_compiler *compiler);
+
+/* Returns the current error code. If an error is occured, future sljit
+   calls which uses the same compiler argument returns early with the same
+   error code. Thus there is no need for checking the error after every
+   call, it is enough to do it before the code is compiled. Removing
+   these checks increases the performance of the compiling process. */
+static SLJIT_INLINE sljit_si sljit_get_compiler_error(struct sljit_compiler *compiler) { return compiler->error; }
+
+/*
+   Allocate a small amount of memory. The size must be <= 64 bytes on 32 bit,
+   and <= 128 bytes on 64 bit architectures. The memory area is owned by the
+   compiler, and freed by sljit_free_compiler. The returned pointer is
+   sizeof(sljit_sw) aligned. Excellent for allocating small blocks during
+   the compiling, and no need to worry about freeing them. The size is
+   enough to contain at most 16 pointers. If the size is outside of the range,
+   the function will return with NULL. However, this return value does not
+   indicate that there is no more memory (does not set the current error code
+   of the compiler to out-of-memory status).
+*/
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_alloc_memory(struct sljit_compiler *compiler, sljit_si size);
+
+#if (defined SLJIT_VERBOSE && SLJIT_VERBOSE)
+/* Passing NULL disables verbose. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_compiler_verbose(struct sljit_compiler *compiler, FILE* verbose);
+#endif
+
+SLJIT_API_FUNC_ATTRIBUTE void* sljit_generate_code(struct sljit_compiler *compiler);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_free_code(void* code);
+
+/*
+   After the machine code generation is finished we can retrieve the allocated
+   executable memory size, although this area may not be fully filled with
+   instructions depending on some optimizations. This function is useful only
+   for statistical purposes.
+
+   Before a successful code generation, this function returns with 0.
+*/
+static SLJIT_INLINE sljit_uw sljit_get_generated_code_size(struct sljit_compiler *compiler) { return compiler->executable_size; }
+
+/* Instruction generation. Returns with any error code. If there is no
+   error, they return with SLJIT_SUCCESS. */
+
+/*
+   The executable code is basically a function call from the viewpoint of
+   the C language. The function calls must obey to the ABI (Application
+   Binary Interface) of the platform, which specify the purpose of machine
+   registers and stack handling among other things. The sljit_emit_enter
+   function emits the necessary instructions for setting up a new context
+   for the executable code and moves function arguments to the saved
+   registers. The number of arguments are specified in the "args"
+   parameter and the first argument goes to SLJIT_SAVED_REG1, the second
+   goes to SLJIT_SAVED_REG2 and so on. The number of scratch and
+   saved registers are passed in "scratches" and "saveds" arguments
+   respectively. Since the saved registers contains the arguments,
+   "args" must be less or equal than "saveds". The sljit_emit_enter
+   is also capable of allocating a stack space for local variables. The
+   "local_size" argument contains the size in bytes of this local area
+   and its staring address is stored in SLJIT_LOCALS_REG. However
+   the SLJIT_LOCALS_REG is not necessary the machine stack pointer.
+   The memory bytes between SLJIT_LOCALS_REG (inclusive) and
+   SLJIT_LOCALS_REG + local_size (exclusive) can be modified freely
+   until the function returns. The stack space is uninitialized.
+
+   Note: every call of sljit_emit_enter and sljit_set_context
+         overwrites the previous context. */
+
+#define SLJIT_MAX_LOCAL_SIZE	65536
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_enter(struct sljit_compiler *compiler,
+	sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size);
+
+/* The machine code has a context (which contains the local stack space size,
+   number of used registers, etc.) which initialized by sljit_emit_enter. Several
+   functions (like sljit_emit_return) requres this context to be able to generate
+   the appropriate code. However, some code fragments (like inline cache) may have
+   no normal entry point so their context is unknown for the compiler. Using the
+   function below we can specify their context.
+
+   Note: every call of sljit_emit_enter and sljit_set_context overwrites
+         the previous context. */
+
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_context(struct sljit_compiler *compiler,
+	sljit_si args, sljit_si scratches, sljit_si saveds, sljit_si local_size);
+
+/* Return from machine code.  The op argument can be SLJIT_UNUSED which means the
+   function does not return with anything or any opcode between SLJIT_MOV and
+   SLJIT_MOV_P (see sljit_emit_op1). As for src and srcw they must be 0 if op
+   is SLJIT_UNUSED, otherwise see below the description about source and
+   destination arguments. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_return(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si src, sljit_sw srcw);
+
+/* Fast calling mechanism for utility functions (see SLJIT_FAST_CALL). All registers and
+   even the stack frame is passed to the callee. The return address is preserved in
+   dst/dstw by sljit_emit_fast_enter (the type of the value stored by this function
+   is sljit_p), and sljit_emit_fast_return can use this as a return value later. */
+
+/* Note: only for sljit specific, non ABI compilant calls. Fast, since only a few machine
+   instructions are needed. Excellent for small uility functions, where saving registers
+   and setting up a new stack frame would cost too much performance. However, it is still
+   possible to return to the address of the caller (or anywhere else). */
+
+/* Note: flags are not changed (unlike sljit_emit_enter / sljit_emit_return). */
+
+/* Note: although sljit_emit_fast_return could be replaced by an ijump, it is not suggested,
+   since many architectures do clever branch prediction on call / return instruction pairs. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_enter(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw);
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fast_return(struct sljit_compiler *compiler, sljit_si src, sljit_sw srcw);
+
+/*
+   Source and destination values for arithmetical instructions
+    imm              - a simple immediate value (cannot be used as a destination)
+    reg              - any of the registers (immediate argument must be 0)
+    [imm]            - absolute immediate memory address
+    [reg+imm]        - indirect memory address
+    [reg+(reg<<imm)] - indirect indexed memory address (shift must be between 0 and 3)
+                       useful for (byte, half, int, sljit_sw) array access
+                       (fully supported by both x86 and ARM architectures, and cheap operation on others)
+*/
+
+/*
+   IMPORATNT NOTE: memory access MUST be naturally aligned except
+                   SLJIT_UNALIGNED macro is defined and its value is 1.
+
+     length | alignment
+   ---------+-----------
+     byte   | 1 byte (any physical_address is accepted)
+     half   | 2 byte (physical_address & 0x1 == 0)
+     int    | 4 byte (physical_address & 0x3 == 0)
+     word   | 4 byte if SLJIT_32BIT_ARCHITECTURE is defined and its value is 1
+            | 8 byte if SLJIT_64BIT_ARCHITECTURE is defined and its value is 1
+    pointer | size of sljit_p type (4 byte on 32 bit machines, 4 or 8 byte
+            | on 64 bit machines)
+
+   Note:   Different architectures have different addressing limitations.
+           A single instruction is enough for the following addressing
+           modes. Other adrressing modes are emulated by instruction
+           sequences. This information could help to improve those code
+           generators which focuses only a few architectures.
+
+   x86:    [reg+imm], -2^32+1 <= imm <= 2^32-1 (full adress space on x86-32)
+           [reg+(reg<<imm)] is supported
+           [imm], -2^32+1 <= imm <= 2^32-1 is supported
+           Write-back is not supported
+   arm:    [reg+imm], -4095 <= imm <= 4095 or -255 <= imm <= 255 for signed
+                bytes, any halfs or floating point values)
+           [reg+(reg<<imm)] is supported
+           Write-back is supported
+   arm-t2: [reg+imm], -255 <= imm <= 4095
+           [reg+(reg<<imm)] is supported
+           Write back is supported only for [reg+imm], where -255 <= imm <= 255
+   ppc:    [reg+imm], -65536 <= imm <= 65535. 64 bit loads/stores and 32 bit
+                signed load on 64 bit requires immediates divisible by 4.
+                [reg+imm] is not supported for signed 8 bit values.
+           [reg+reg] is supported
+           Write-back is supported except for one instruction: 32 bit signed
+                load with [reg+imm] addressing mode on 64 bit.
+   mips:   [reg+imm], -65536 <= imm <= 65535
+   sparc:  [reg+imm], -4096 <= imm <= 4095
+           [reg+reg] is supported
+*/
+
+/* Register output: simply the name of the register.
+   For destination, you can use SLJIT_UNUSED as well. */
+#define SLJIT_MEM		0x100
+#define SLJIT_MEM0()		(SLJIT_MEM)
+#define SLJIT_MEM1(r1)		(SLJIT_MEM | (r1))
+#define SLJIT_MEM2(r1, r2)	(SLJIT_MEM | (r1) | ((r2) << 4))
+#define SLJIT_IMM		0x200
+
+/* Set 32 bit operation mode (I) on 64 bit CPUs. The flag is totally ignored on
+   32 bit CPUs. If this flag is set for an arithmetic operation, it uses only the
+   lower 32 bit of the input register(s), and set the CPU status flags according
+   to the 32 bit result. The higher 32 bits are undefined for both the input and
+   output. However, the CPU might not ignore those higher 32 bits, like MIPS, which
+   expects it to be the sign extension of the lower 32 bit. All 32 bit operations
+   are undefined, if this condition is not fulfilled. Therefore, when SLJIT_INT_OP
+   is specified, all register arguments must be the result of other operations with
+   the same SLJIT_INT_OP flag. In other words, although a register can hold either
+   a 64 or 32 bit value, these values cannot be mixed. The only exceptions are
+   SLJIT_IMOV and SLJIT_IMOVU (SLJIT_MOV_SI/SLJIT_MOV_UI/SLJIT_MOVU_SI/SLJIT_MOV_UI
+   with SLJIT_INT_OP flag) which can convert any source argument to SLJIT_INT_OP
+   compatible result. This conversion might be unnecessary on some CPUs like x86-64,
+   since the upper 32 bit is always ignored. In this case SLJIT is clever enough
+   to not generate any instructions if the source and destination operands are the
+   same registers. Affects sljit_emit_op0, sljit_emit_op1 and sljit_emit_op2. */
+#define SLJIT_INT_OP		0x100
+
+/* Single precision mode (SP). This flag is similar to SLJIT_INT_OP, just
+   it applies to floating point registers (it is even the same bit). When
+   this flag is passed, the CPU performs single precision floating point
+   operations. Similar to SLJIT_INT_OP, all register arguments must be the
+   result of other floating point operations with this flag. Affects
+   sljit_emit_fop1, sljit_emit_fop2 and sljit_emit_fcmp. */
+#define SLJIT_SINGLE_OP		0x100
+
+/* Common CPU status flags for all architectures (x86, ARM, PPC)
+    - carry flag
+    - overflow flag
+    - zero flag
+    - negative/positive flag (depends on arc)
+   On mips, these flags are emulated by software. */
+
+/* By default, the instructions may, or may not set the CPU status flags.
+   Forcing to set or keep status flags can be done with the following flags: */
+
+/* Note: sljit tries to emit the minimum number of instructions. Using these
+   flags can increase them, so use them wisely to avoid unnecessary code generation. */
+
+/* Set Equal (Zero) status flag (E). */
+#define SLJIT_SET_E			0x0200
+/* Set signed status flag (S). */
+#define SLJIT_SET_S			0x0400
+/* Set unsgined status flag (U). */
+#define SLJIT_SET_U			0x0800
+/* Set signed overflow flag (O). */
+#define SLJIT_SET_O			0x1000
+/* Set carry flag (C).
+   Note: Kinda unsigned overflow, but behaves differently on various cpus. */
+#define SLJIT_SET_C			0x2000
+/* Do not modify the flags (K).
+   Note: This flag cannot be combined with any other SLJIT_SET_* flag. */
+#define SLJIT_KEEP_FLAGS		0x4000
+
+/* Notes:
+     - you cannot postpone conditional jump instructions except if noted that
+       the instruction does not set flags (See: SLJIT_KEEP_FLAGS).
+     - flag combinations: '|' means 'logical or'. */
+
+/* Flags: - (never set any flags)
+   Note: breakpoint instruction is not supported by all architectures (namely ppc)
+         It falls back to SLJIT_NOP in those cases. */
+#define SLJIT_BREAKPOINT		0
+/* Flags: - (never set any flags)
+   Note: may or may not cause an extra cycle wait
+         it can even decrease the runtime in a few cases. */
+#define SLJIT_NOP			1
+/* Flags: - (may destroy flags)
+   Unsigned multiplication of SLJIT_SCRATCH_REG1 and SLJIT_SCRATCH_REG2.
+   Result goes to SLJIT_SCRATCH_REG2:SLJIT_SCRATCH_REG1 (high:low) word */
+#define SLJIT_UMUL			2
+/* Flags: - (may destroy flags)
+   Signed multiplication of SLJIT_SCRATCH_REG1 and SLJIT_SCRATCH_REG2.
+   Result goes to SLJIT_SCRATCH_REG2:SLJIT_SCRATCH_REG1 (high:low) word */
+#define SLJIT_SMUL			3
+/* Flags: I - (may destroy flags)
+   Unsigned divide of the value in SLJIT_SCRATCH_REG1 by the value in SLJIT_SCRATCH_REG2.
+   The result is placed in SLJIT_SCRATCH_REG1 and the remainder goes to SLJIT_SCRATCH_REG2.
+   Note: if SLJIT_SCRATCH_REG2 contains 0, the behaviour is undefined. */
+#define SLJIT_UDIV			4
+#define SLJIT_IUDIV			(SLJIT_UDIV | SLJIT_INT_OP)
+/* Flags: I - (may destroy flags)
+   Signed divide of the value in SLJIT_SCRATCH_REG1 by the value in SLJIT_SCRATCH_REG2.
+   The result is placed in SLJIT_SCRATCH_REG1 and the remainder goes to SLJIT_SCRATCH_REG2.
+   Note: if SLJIT_SCRATCH_REG2 contains 0, the behaviour is undefined. */
+#define SLJIT_SDIV			5
+#define SLJIT_ISDIV			(SLJIT_SDIV | SLJIT_INT_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op0(struct sljit_compiler *compiler, sljit_si op);
+
+/* Notes for MOV instructions:
+   U = Mov with update (post form). If source or destination defined as SLJIT_MEM1(r1)
+       or SLJIT_MEM2(r1, r2), r1 is increased by the sum of r2 and the constant argument
+   UB = unsigned byte (8 bit)
+   SB = signed byte (8 bit)
+   UH = unsigned half (16 bit)
+   SH = signed half (16 bit)
+   UI = unsigned int (32 bit)
+   SI = signed int (32 bit)
+   P  = pointer (sljit_p) size */
+
+/* Flags: - (never set any flags) */
+#define SLJIT_MOV			6
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_UB			7
+#define SLJIT_IMOV_UB			(SLJIT_MOV_UB | SLJIT_INT_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_SB			8
+#define SLJIT_IMOV_SB			(SLJIT_MOV_SB | SLJIT_INT_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_UH			9
+#define SLJIT_IMOV_UH			(SLJIT_MOV_UH | SLJIT_INT_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOV_SH			10
+#define SLJIT_IMOV_SH			(SLJIT_MOV_SH | SLJIT_INT_OP)
+/* Flags: I - (never set any flags)
+   Note: see SLJIT_INT_OP for further details. */
+#define SLJIT_MOV_UI			11
+/* No SLJIT_INT_OP form, since it the same as SLJIT_IMOVU. */
+/* Flags: I - (never set any flags)
+   Note: see SLJIT_INT_OP for further details. */
+#define SLJIT_MOV_SI			12
+#define SLJIT_IMOV			(SLJIT_MOV_SI | SLJIT_INT_OP)
+/* Flags: - (never set any flags) */
+#define SLJIT_MOV_P			13
+/* Flags: - (never set any flags) */
+#define SLJIT_MOVU			14
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_UB			15
+#define SLJIT_IMOVU_UB			(SLJIT_MOVU_UB | SLJIT_INT_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_SB			16
+#define SLJIT_IMOVU_SB			(SLJIT_MOVU_SB | SLJIT_INT_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_UH			17
+#define SLJIT_IMOVU_UH			(SLJIT_MOVU_UH | SLJIT_INT_OP)
+/* Flags: I - (never set any flags) */
+#define SLJIT_MOVU_SH			18
+#define SLJIT_IMOVU_SH			(SLJIT_MOVU_SH | SLJIT_INT_OP)
+/* Flags: I - (never set any flags)
+   Note: see SLJIT_INT_OP for further details. */
+#define SLJIT_MOVU_UI			19
+/* No SLJIT_INT_OP form, since it the same as SLJIT_IMOVU. */
+/* Flags: I - (never set any flags)
+   Note: see SLJIT_INT_OP for further details. */
+#define SLJIT_MOVU_SI			20
+#define SLJIT_IMOVU			(SLJIT_MOVU_SI | SLJIT_INT_OP)
+/* Flags: - (never set any flags) */
+#define SLJIT_MOVU_P			21
+/* Flags: I | E | K */
+#define SLJIT_NOT			22
+#define SLJIT_INOT			(SLJIT_NOT | SLJIT_INT_OP)
+/* Flags: I | E | O | K */
+#define SLJIT_NEG			23
+#define SLJIT_INEG			(SLJIT_NEG | SLJIT_INT_OP)
+/* Count leading zeroes
+   Flags: I | E | K
+   Important note! Sparc 32 does not support K flag, since
+   the required popc instruction is introduced only in sparc 64. */
+#define SLJIT_CLZ			24
+#define SLJIT_ICLZ			(SLJIT_CLZ | SLJIT_INT_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op1(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src, sljit_sw srcw);
+
+/* Flags: I | E | O | C | K */
+#define SLJIT_ADD			25
+#define SLJIT_IADD			(SLJIT_ADD | SLJIT_INT_OP)
+/* Flags: I | C | K */
+#define SLJIT_ADDC			26
+#define SLJIT_IADDC			(SLJIT_ADDC | SLJIT_INT_OP)
+/* Flags: I | E | S | U | O | C | K */
+#define SLJIT_SUB			27
+#define SLJIT_ISUB			(SLJIT_SUB | SLJIT_INT_OP)
+/* Flags: I | C | K */
+#define SLJIT_SUBC			28
+#define SLJIT_ISUBC			(SLJIT_SUBC | SLJIT_INT_OP)
+/* Note: integer mul
+   Flags: I | O (see SLJIT_C_MUL_*) | K */
+#define SLJIT_MUL			29
+#define SLJIT_IMUL			(SLJIT_MUL | SLJIT_INT_OP)
+/* Flags: I | E | K */
+#define SLJIT_AND			30
+#define SLJIT_IAND			(SLJIT_AND | SLJIT_INT_OP)
+/* Flags: I | E | K */
+#define SLJIT_OR			31
+#define SLJIT_IOR			(SLJIT_OR | SLJIT_INT_OP)
+/* Flags: I | E | K */
+#define SLJIT_XOR			32
+#define SLJIT_IXOR			(SLJIT_XOR | SLJIT_INT_OP)
+/* Flags: I | E | K
+   Let bit_length be the length of the shift operation: 32 or 64.
+   If src2 is immediate, src2w is masked by (bit_length - 1).
+   Otherwise, if the content of src2 is outside the range from 0
+   to bit_length - 1, the operation is undefined. */
+#define SLJIT_SHL			33
+#define SLJIT_ISHL			(SLJIT_SHL | SLJIT_INT_OP)
+/* Flags: I | E | K
+   Let bit_length be the length of the shift operation: 32 or 64.
+   If src2 is immediate, src2w is masked by (bit_length - 1).
+   Otherwise, if the content of src2 is outside the range from 0
+   to bit_length - 1, the operation is undefined. */
+#define SLJIT_LSHR			34
+#define SLJIT_ILSHR			(SLJIT_LSHR | SLJIT_INT_OP)
+/* Flags: I | E | K
+   Let bit_length be the length of the shift operation: 32 or 64.
+   If src2 is immediate, src2w is masked by (bit_length - 1).
+   Otherwise, if the content of src2 is outside the range from 0
+   to bit_length - 1, the operation is undefined. */
+#define SLJIT_ASHR			35
+#define SLJIT_IASHR			(SLJIT_ASHR | SLJIT_INT_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op2(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src1, sljit_sw src1w,
+	sljit_si src2, sljit_sw src2w);
+
+/* The following function is a helper function for sljit_emit_op_custom.
+   It returns with the real machine register index of any SLJIT_SCRATCH
+   SLJIT_SAVED or SLJIT_LOCALS register.
+   Note: it returns with -1 for virtual registers (all EREGs on x86-32).
+   Note: register returned by SLJIT_LOCALS_REG is not necessary the real
+         stack pointer register of the target architecture. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_register_index(sljit_si reg);
+
+/* Any instruction can be inserted into the instruction stream by
+   sljit_emit_op_custom. It has a similar purpose as inline assembly.
+   The size parameter must match to the instruction size of the target
+   architecture:
+
+         x86: 0 < size <= 15. The instruction argument can be byte aligned.
+      Thumb2: if size == 2, the instruction argument must be 2 byte aligned.
+              if size == 4, the instruction argument must be 4 byte aligned.
+   Otherwise: size must be 4 and instruction argument must be 4 byte aligned. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_custom(struct sljit_compiler *compiler,
+	void *instruction, sljit_si size);
+
+/* Returns with non-zero if fpu is available. */
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_is_fpu_available(void);
+
+/* Note: dst is the left and src is the right operand for SLJIT_FCMP.
+   Note: NaN check is always performed. If SLJIT_C_FLOAT_UNORDERED is set,
+         the comparison result is unpredictable.
+   Flags: SP | E | S (see SLJIT_C_FLOAT_*) */
+#define SLJIT_CMPD			36
+#define SLJIT_CMPS			(SLJIT_CMPD | SLJIT_SINGLE_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_MOVD			37
+#define SLJIT_MOVS			(SLJIT_MOVD | SLJIT_SINGLE_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_NEGD			38
+#define SLJIT_NEGS			(SLJIT_NEGD | SLJIT_SINGLE_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_ABSD			39
+#define SLJIT_ABSS			(SLJIT_ABSD | SLJIT_SINGLE_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop1(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src, sljit_sw srcw);
+
+/* Flags: SP - (never set any flags) */
+#define SLJIT_ADDD			40
+#define SLJIT_ADDS			(SLJIT_ADDD | SLJIT_SINGLE_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_SUBD			41
+#define SLJIT_SUBS			(SLJIT_SUBD | SLJIT_SINGLE_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_MULD			42
+#define SLJIT_MULS			(SLJIT_MULD | SLJIT_SINGLE_OP)
+/* Flags: SP - (never set any flags) */
+#define SLJIT_DIVD			43
+#define SLJIT_DIVS			(SLJIT_DIVD | SLJIT_SINGLE_OP)
+
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_fop2(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src1, sljit_sw src1w,
+	sljit_si src2, sljit_sw src2w);
+
+/* Label and jump instructions. */
+
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_label* sljit_emit_label(struct sljit_compiler *compiler);
+
+/* Invert conditional instruction: xor (^) with 0x1 */
+#define SLJIT_C_EQUAL			0
+#define SLJIT_C_ZERO			0
+#define SLJIT_C_NOT_EQUAL		1
+#define SLJIT_C_NOT_ZERO		1
+
+#define SLJIT_C_LESS			2
+#define SLJIT_C_GREATER_EQUAL		3
+#define SLJIT_C_GREATER			4
+#define SLJIT_C_LESS_EQUAL		5
+#define SLJIT_C_SIG_LESS		6
+#define SLJIT_C_SIG_GREATER_EQUAL	7
+#define SLJIT_C_SIG_GREATER		8
+#define SLJIT_C_SIG_LESS_EQUAL		9
+
+#define SLJIT_C_OVERFLOW		10
+#define SLJIT_C_NOT_OVERFLOW		11
+
+#define SLJIT_C_MUL_OVERFLOW		12
+#define SLJIT_C_MUL_NOT_OVERFLOW	13
+
+#define SLJIT_C_FLOAT_EQUAL		14
+#define SLJIT_C_FLOAT_NOT_EQUAL		15
+#define SLJIT_C_FLOAT_LESS		16
+#define SLJIT_C_FLOAT_GREATER_EQUAL	17
+#define SLJIT_C_FLOAT_GREATER		18
+#define SLJIT_C_FLOAT_LESS_EQUAL	19
+#define SLJIT_C_FLOAT_UNORDERED		20
+#define SLJIT_C_FLOAT_ORDERED		21
+
+#define SLJIT_JUMP			22
+#define SLJIT_FAST_CALL			23
+#define SLJIT_CALL0			24
+#define SLJIT_CALL1			25
+#define SLJIT_CALL2			26
+#define SLJIT_CALL3			27
+
+/* Fast calling method. See sljit_emit_fast_enter / sljit_emit_fast_return. */
+
+/* The target can be changed during runtime (see: sljit_set_jump_addr). */
+#define SLJIT_REWRITABLE_JUMP		0x1000
+
+/* Emit a jump instruction. The destination is not set, only the type of the jump.
+    type must be between SLJIT_C_EQUAL and SLJIT_CALL3
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP
+   Flags: - (never set any flags) for both conditional and unconditional jumps.
+   Flags: destroy all flags for calls. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_jump(struct sljit_compiler *compiler, sljit_si type);
+
+/* Basic arithmetic comparison. In most architectures it is implemented as
+   an SLJIT_SUB operation (with SLJIT_UNUSED destination and setting
+   appropriate flags) followed by a sljit_emit_jump. However some
+   architectures (i.e: MIPS) may employ special optimizations here. It is
+   suggested to use this comparison form when appropriate.
+    type must be between SLJIT_C_EQUAL and SLJIT_C_SIG_LESS_EQUAL
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP or SLJIT_INT_OP
+   Flags: destroy flags. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_cmp(struct sljit_compiler *compiler, sljit_si type,
+	sljit_si src1, sljit_sw src1w,
+	sljit_si src2, sljit_sw src2w);
+
+/* Basic floating point comparison. In most architectures it is implemented as
+   an SLJIT_FCMP operation (setting appropriate flags) followed by a
+   sljit_emit_jump. However some architectures (i.e: MIPS) may employ
+   special optimizations here. It is suggested to use this comparison form
+   when appropriate.
+    type must be between SLJIT_C_FLOAT_EQUAL and SLJIT_C_FLOAT_ORDERED
+    type can be combined (or'ed) with SLJIT_REWRITABLE_JUMP and SLJIT_SINGLE_OP
+   Flags: destroy flags.
+   Note: if either operand is NaN, the behaviour is undefined for
+         type <= SLJIT_C_FLOAT_LESS_EQUAL. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_jump* sljit_emit_fcmp(struct sljit_compiler *compiler, sljit_si type,
+	sljit_si src1, sljit_sw src1w,
+	sljit_si src2, sljit_sw src2w);
+
+/* Set the destination of the jump to this label. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_label(struct sljit_jump *jump, struct sljit_label* label);
+/* Only for jumps defined with SLJIT_REWRITABLE_JUMP flag.
+   Note: use sljit_emit_ijump for fixed jumps. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_target(struct sljit_jump *jump, sljit_uw target);
+
+/* Call function or jump anywhere. Both direct and indirect form
+    type must be between SLJIT_JUMP and SLJIT_CALL3
+    Direct form: set src to SLJIT_IMM() and srcw to the address
+    Indirect form: any other valid addressing mode
+   Flags: - (never set any flags) for unconditional jumps.
+   Flags: destroy all flags for calls. */
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_ijump(struct sljit_compiler *compiler, sljit_si type, sljit_si src, sljit_sw srcw);
+
+/* Perform the operation using the conditional flags as the second argument.
+   Type must always be between SLJIT_C_EQUAL and SLJIT_C_FLOAT_ORDERED. The
+   value represented by the type is 1, if the condition represented by the type
+   is fulfilled, and 0 otherwise.
+
+   If op == SLJIT_MOV, SLJIT_MOV_SI, SLJIT_MOV_UI:
+     Set dst to the value represented by the type (0 or 1).
+     Src must be SLJIT_UNUSED, and srcw must be 0
+     Flags: - (never set any flags)
+   If op == SLJIT_OR, op == SLJIT_AND, op == SLJIT_XOR
+     Performs the binary operation using src as the first, and the value
+     represented by type as the second argument.
+     Important note: only dst=src and dstw=srcw is supported at the moment!
+     Flags: I | E | K
+   Note: sljit_emit_op_flags does nothing, if dst is SLJIT_UNUSED (regardless of op). */
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_emit_op_flags(struct sljit_compiler *compiler, sljit_si op,
+	sljit_si dst, sljit_sw dstw,
+	sljit_si src, sljit_sw srcw,
+	sljit_si type);
+
+/* Copies the base address of SLJIT_LOCALS_REG+offset to dst.
+   Flags: - (never set any flags) */
+SLJIT_API_FUNC_ATTRIBUTE sljit_si sljit_get_local_base(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw offset);
+
+/* The constant can be changed runtime (see: sljit_set_const)
+   Flags: - (never set any flags) */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_const* sljit_emit_const(struct sljit_compiler *compiler, sljit_si dst, sljit_sw dstw, sljit_sw init_value);
+
+/* After the code generation the address for label, jump and const instructions
+   are computed. Since these structures are freed by sljit_free_compiler, the
+   addresses must be preserved by the user program elsewere. */
+static SLJIT_INLINE sljit_uw sljit_get_label_addr(struct sljit_label *label) { return label->addr; }
+static SLJIT_INLINE sljit_uw sljit_get_jump_addr(struct sljit_jump *jump) { return jump->addr; }
+static SLJIT_INLINE sljit_uw sljit_get_const_addr(struct sljit_const *const_) { return const_->addr; }
+
+/* Only the address is required to rewrite the code. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_jump_addr(sljit_uw addr, sljit_uw new_addr);
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_const(sljit_uw addr, sljit_sw new_constant);
+
+/* --------------------------------------------------------------------- */
+/*  Miscellaneous utility functions                                      */
+/* --------------------------------------------------------------------- */
+
+#define SLJIT_MAJOR_VERSION	0
+#define SLJIT_MINOR_VERSION	90
+
+/* Get the human readable name of the platform. Can be useful on platforms
+   like ARM, where ARM and Thumb2 functions can be mixed, and
+   it is useful to know the type of the code generator. */
+SLJIT_API_FUNC_ATTRIBUTE SLJIT_CONST char* sljit_get_platform_name(void);
+
+/* Portable helper function to get an offset of a member. */
+#define SLJIT_OFFSETOF(base, member) ((sljit_sw)(&((base*)0x10)->member) - 0x10)
+
+#if (defined SLJIT_UTIL_GLOBAL_LOCK && SLJIT_UTIL_GLOBAL_LOCK)
+/* This global lock is useful to compile common functions. */
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_grab_lock(void);
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_release_lock(void);
+#endif
+
+#if (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK)
+
+/* The sljit_stack is a utiliy feature of sljit, which allocates a
+   writable memory region between base (inclusive) and limit (exclusive).
+   Both base and limit is a pointer, and base is always <= than limit.
+   This feature uses the "address space reserve" feature
+   of modern operating systems. Basically we don't need to allocate a
+   huge memory block in one step for the worst case, we can start with
+   a smaller chunk and extend it later. Since the address space is
+   reserved, the data never copied to other regions, thus it is safe
+   to store pointers here. */
+
+/* Note: The base field is aligned to PAGE_SIZE bytes (usually 4k or more).
+   Note: stack growing should not happen in small steps: 4k, 16k or even
+     bigger growth is better.
+   Note: this structure may not be supported by all operating systems.
+     Some kind of fallback mechanism is suggested when SLJIT_UTIL_STACK
+     is not defined. */
+
+struct sljit_stack {
+	/* User data, anything can be stored here.
+	   Starting with the same value as base. */
+	sljit_uw top;
+	/* These members are read only. */
+	sljit_uw base;
+	sljit_uw limit;
+	sljit_uw max_limit;
+};
+
+/* Returns NULL if unsuccessful.
+   Note: limit and max_limit contains the size for stack allocation
+   Note: the top field is initialized to base. */
+SLJIT_API_FUNC_ATTRIBUTE struct sljit_stack* SLJIT_CALL sljit_allocate_stack(sljit_uw limit, sljit_uw max_limit);
+SLJIT_API_FUNC_ATTRIBUTE void SLJIT_CALL sljit_free_stack(struct sljit_stack* stack);
+
+/* Can be used to increase (allocate) or decrease (free) the memory area.
+   Returns with a non-zero value if unsuccessful. If new_limit is greater than
+   max_limit, it will fail. It is very easy to implement a stack data structure,
+   since the growth ratio can be added to the current limit, and sljit_stack_resize
+   will do all the necessary checks. The fields of the stack are not changed if
+   sljit_stack_resize fails. */
+SLJIT_API_FUNC_ATTRIBUTE sljit_sw SLJIT_CALL sljit_stack_resize(struct sljit_stack* stack, sljit_uw new_limit);
+
+#endif /* (defined SLJIT_UTIL_STACK && SLJIT_UTIL_STACK) */
+
+#if !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL)
+
+/* Get the entry address of a given function. */
+#define SLJIT_FUNC_OFFSET(func_name)	((sljit_sw)func_name)
+
+#else /* !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL) */
+
+/* All JIT related code should be placed in the same context (library, binary, etc.). */
+
+#define SLJIT_FUNC_OFFSET(func_name)	(*(sljit_sw*)(void*)func_name)
+
+/* For powerpc64, the function pointers point to a context descriptor. */
+struct sljit_function_context {
+	sljit_sw addr;
+	sljit_sw r2;
+	sljit_sw r11;
+};
+
+/* Fill the context arguments using the addr and the function.
+   If func_ptr is NULL, it will not be set to the address of context
+   If addr is NULL, the function address also comes from the func pointer. */
+SLJIT_API_FUNC_ATTRIBUTE void sljit_set_function_context(void** func_ptr, struct sljit_function_context* context, sljit_sw addr, void* func);
+
+#endif /* !(defined SLJIT_INDIRECT_CALL && SLJIT_INDIRECT_CALL) */
+
+#endif /* _SLJIT_LIR_H_ */