loadpath 0.1.1__py3-none-any.whl

loadpath/examples/heat-exchanger-crossflow-tuned.json

@@ -0,0 +1,48 @@
+{
+  "name": "crossflow-cube-tuned",
+  "description": "The crossflow cube tuned with the whole-exchanger simulation (porous.py): a 1.5 mm seal band instead of 2 mm, and ports sized per fluid (water 10 mm, air 18 mm). Simulated against the original: water pressure drop 745 -> 267 Pa, air 8.5 -> 1.9 kPa, effectiveness 0.348 -> 0.377, 5% more plastic.",
+  "core": {
+    "type": "box",
+    "min": [
+      0,
+      0,
+      0
+    ],
+    "max": [
+      30,
+      30,
+      30
+    ]
+  },
+  "type": "gyroid",
+  "layout": "cross",
+  "axes": "xy",
+  "fluids": [
+    "water",
+    "air"
+  ],
+  "cell": 8,
+  "wall": 1.0,
+  "header": 4,
+  "cap": 1.5,
+  "portDiameter": {
+    "water": 10,
+    "air": 18
+  },
+  "portLength": 4,
+  "step": 0.45,
+  "simulate": true,
+  "duty": {
+    "water": {
+      "fluid": "water",
+      "lPerMin": 1.0,
+      "tIn": 60
+    },
+    "air": {
+      "fluid": "air",
+      "kgPerS": 0.002,
+      "tIn": 20
+    },
+    "wall": "petg"
+  }
+}

loadpath/examples/heat-exchanger-crossflow.json

@@ -0,0 +1,20 @@
+{
+  "name": "crossflow-cube",
+  "description": "A 30 mm cube of sheet gyroid, water across x and air across y (crossflow), with plenums and ports on four faces. The smallest heat exchanger to try first.",
+  "core": {"type": "box", "min": [0, 0, 0], "max": [30, 30, 30]},
+  "type": "gyroid",
+  "layout": "cross",
+  "axes": "xy",
+  "fluids": ["water", "air"],
+  "cell": 8,
+  "wall": 1.0,
+  "header": 4,
+  "portDiameter": 6,
+  "portLength": 4,
+  "step": 0.45,
+  "duty": {
+    "water": {"fluid": "water", "lPerMin": 1.0, "tIn": 60},
+    "air": {"fluid": "air", "kgPerS": 0.002, "tIn": 20},
+    "wall": "petg"
+  }
+}

loadpath/examples/pedal-lattice.json

@@ -0,0 +1,23 @@
+{
+  "name": "pedal",
+  "description": "A chunky foot-pedal arm kept at half its design space, then filled with a stress-graded gyroid under a 1.2 mm skin (prints like infill on FDM). Shows the lattice option: solid where it works hard, lattice where it idles.",
+  "designSpace": [{"type": "box", "min": [0, -20, 0], "max": [120, 20, 30]}],
+  "preserve": [
+    {"id": "pivot-boss", "shape": {"type": "cylinder", "center": [12, 0, 15], "axis": "y", "length": 40, "r": 12}},
+    {"id": "foot-pad", "shape": {"type": "box", "min": [90, -20, 26], "max": [120, 20, 30]}}
+  ],
+  "keepOut": [
+    {"id": "pivot", "shape": {"type": "cylinder", "center": [12, 0, 15], "axis": "y", "length": 50, "r": 4.2}}
+  ],
+  "supports": [
+    {"region": "pivot", "fix": "pin"},
+    {"shape": {"type": "box", "min": [60, -20, 0], "max": [70, 20, 1]}, "fix": "z"}
+  ],
+  "loadCases": [{"name": "step", "loads": [{"region": "foot-pad", "force": [0, 0, -400]}]}],
+  "material": "petg",
+  "process": "fdm",
+  "goal": {"volumeFraction": 0.5},
+  "minMember": 4.0,
+  "resolution": {"maxElements": 20000},
+  "lattice": {"type": "gyroid", "cell": 10, "skin": 1.2, "minWall": 0.8, "maxWall": 2.0}
+}

loadpath/examples/pressure-plenum.json

@@ -0,0 +1,12 @@
+{
+  "name": "pressure-plenum",
+  "description": "Skin-and-rib under pressure: a sealed 50 x 36 x 24 mm plenum at 10 bar gauge, printed in AlSi10Mg. The cavity keeps a 2 mm wall (the skin); the optimizer adds ribs in the 6 mm outside it until the part holds a safety factor of 3. Its flat walls see the same bending stress as a 100 x 72 mm plenum's 2 mm walls at 2.5 bar of boost. No supports: a sealed cavity's pressure balances on itself.",
+  "designSpace": {"type": "box", "min": [-31, -24, -18], "max": [31, 24, 18]},
+  "keepOut": [{"id": "plenum", "shape": {"type": "box", "min": [-25, -18, -12], "max": [25, 18, 12]}, "wall": 2.0}],
+  "loadCases": [{"name": "boost", "loads": [{"region": "plenum", "pressure": 1.0}]}],
+  "material": "alsi10mg",
+  "goal": {"safetyFactor": 3.0, "volumeFraction": 0.1},
+  "minMember": 2.0,
+  "symmetry": ["x", "y", "z"],
+  "resolution": {"pitch": 1.0}
+}

loadpath/examples/shelf-bracket.json

@@ -0,0 +1,27 @@
+{
+  "name": "shelf-bracket",
+  "description": "A wall shelf bracket printed in PETG: two M5 screws into the wall, a 40 mm pad the shelf sits on 100 mm out, 10 kg of shelf load with a factor of 3. Shows fasteners, a bearing-face support and a safety-factor goal.",
+  "designSpace": [{"type": "box", "min": [0, 0, -15], "max": [100, 80, 15]}],
+  "fasteners": [
+    {"id": "upper", "size": "M5", "seat": [6, 65, 0], "direction": "-x", "grip": 6, "end": "face"},
+    {"id": "lower", "size": "M5", "seat": [6, 15, 0], "direction": "-x", "grip": 6, "end": "face"}
+  ],
+  "preserve": [
+    {"id": "shelf-pad", "shape": {"type": "box", "min": [60, 76, -15], "max": [100, 80, 15]}}
+  ],
+  "supports": [
+    {"region": "upper-bore", "fix": "yz"},
+    {"region": "lower-bore", "fix": "yz"},
+    {"shape": {"type": "box", "min": [0, 0, -15], "max": [1, 80, 15]}, "fix": "x"}
+  ],
+  "loadCases": [
+    {"name": "shelf", "loads": [{"region": "shelf-pad", "force": [0, -100, 0]}]},
+    {"name": "pull", "loads": [{"region": "shelf-pad", "force": [0, -40, 15]}]}
+  ],
+  "material": "petg",
+  "process": {"type": "fdm", "buildDirection": "+z"},
+  "goal": {"safetyFactor": 3.0},
+  "minMember": 4.0,
+  "symmetry": [],
+  "resolution": {"maxElements": 20000}
+}