typescript-to-gdscript 0.1.0

package/typings/classes/TileSet.d.ts

@@ -0,0 +1,348 @@
+// AUTO-GENERATED from Godot class documentation.
+// Manual overrides applied from typings-overrides/*.d.ts
+
+/** Tile library for tilemaps. */
+declare class TileSet extends Resource {
+  /**
+   * For all half-offset shapes (Isometric, Hexagonal and Half-Offset square), changes the way tiles are indexed in the {@link TileMapLayer} grid.
+   */
+  tile_layout: int;
+  /**
+   * For all half-offset shapes (Isometric, Hexagonal and Half-Offset square), determines the offset axis.
+   */
+  tile_offset_axis: int;
+  /** The tile shape. */
+  tile_shape: int;
+  /**
+   * The tile size, in pixels. For all tile shapes, this size corresponds to the encompassing rectangle of the tile shape. This is thus the minimal cell size required in an atlas.
+   */
+  tile_size: Vector2i;
+  /** Enables/Disable uv clipping when rendering the tiles. */
+  uv_clipping: boolean;
+  set_tile_layout(value: int): void;
+  get_tile_layout(): int;
+  set_tile_offset_axis(value: int): void;
+  get_tile_offset_axis(): int;
+  set_tile_shape(value: int): void;
+  get_tile_shape(): int;
+  set_tile_size(value: Vector2i | Vector2): void;
+  get_tile_size(): Vector2i;
+  set_uv_clipping(value: boolean): void;
+  is_uv_clipping(): boolean;
+
+  /**
+   * Adds a custom data layer to the TileSet at the given position `to_position` in the array. If `to_position` is -1, adds it at the end of the array.
+   * Custom data layers allow assigning custom properties to atlas tiles.
+   */
+  add_custom_data_layer(to_position?: int): void;
+  /**
+   * Adds a navigation layer to the TileSet at the given position `to_position` in the array. If `to_position` is -1, adds it at the end of the array.
+   * Navigation layers allow assigning a navigable area to atlas tiles.
+   */
+  add_navigation_layer(to_position?: int): void;
+  /**
+   * Adds an occlusion layer to the TileSet at the given position `to_position` in the array. If `to_position` is -1, adds it at the end of the array.
+   * Occlusion layers allow assigning occlusion polygons to atlas tiles.
+   */
+  add_occlusion_layer(to_position?: int): void;
+  /**
+   * Adds a {@link TileMapPattern} to be stored in the TileSet resource. If provided, insert it at the given `index`.
+   */
+  add_pattern(pattern: TileMapPattern, index?: int): int;
+  /**
+   * Adds a physics layer to the TileSet at the given position `to_position` in the array. If `to_position` is -1, adds it at the end of the array.
+   * Physics layers allow assigning collision polygons to atlas tiles.
+   */
+  add_physics_layer(to_position?: int): void;
+  /**
+   * Adds a {@link TileSetSource} to the TileSet. If `atlas_source_id_override` is not -1, also set its source ID. Otherwise, a unique identifier is automatically generated.
+   * The function returns the added source ID or -1 if the source could not be added.
+   * **Warning:** A source cannot belong to two TileSets at the same time. If the added source was attached to another {@link TileSet}, it will be removed from that one.
+   */
+  add_source(source: TileSetSource, atlas_source_id_override?: int): int;
+  /**
+   * Adds a new terrain to the given terrain set `terrain_set` at the given position `to_position` in the array. If `to_position` is -1, adds it at the end of the array.
+   */
+  add_terrain(terrain_set: int, to_position?: int): void;
+  /**
+   * Adds a new terrain set at the given position `to_position` in the array. If `to_position` is -1, adds it at the end of the array.
+   */
+  add_terrain_set(to_position?: int): void;
+  /** Clears tile proxies pointing to invalid tiles. */
+  cleanup_invalid_tile_proxies(): void;
+  /** Clears all tile proxies. */
+  clear_tile_proxies(): void;
+  /**
+   * Returns the alternative-level proxy for the given identifiers. The returned array contains the three proxie's target identifiers (source ID, atlas coords ID and alternative tile ID).
+   * If the TileSet has no proxy for the given identifiers, returns an empty Array.
+   */
+  get_alternative_level_tile_proxy(source_from: int, coords_from: Vector2i | Vector2, alternative_from: int): Array<unknown>;
+  /**
+   * Returns the coordinate-level proxy for the given identifiers. The returned array contains the two target identifiers of the proxy (source ID and atlas coordinates ID).
+   * If the TileSet has no proxy for the given identifiers, returns an empty Array.
+   */
+  get_coords_level_tile_proxy(source_from: int, coords_from: Vector2i | Vector2): Array<unknown>;
+  /** Returns the index of the custom data layer identified by the given name. */
+  get_custom_data_layer_by_name(layer_name: string | NodePath): int;
+  /** Returns the name of the custom data layer identified by the given index. */
+  get_custom_data_layer_name(layer_index: int): string;
+  /** Returns the type of the custom data layer identified by the given index. */
+  get_custom_data_layer_type(layer_index: int): int;
+  /** Returns the custom data layers count. */
+  get_custom_data_layers_count(): int;
+  /**
+   * Returns whether or not the specified navigation layer of the TileSet navigation data layer identified by the given `layer_index` is enabled, given a navigation_layers `layer_number` between 1 and 32.
+   */
+  get_navigation_layer_layer_value(layer_index: int, layer_number: int): boolean;
+  /** Returns the navigation layers (as in the Navigation server) of the given TileSet navigation layer. */
+  get_navigation_layer_layers(layer_index: int): int;
+  /** Returns the navigation layers count. */
+  get_navigation_layers_count(): int;
+  /**
+   * Returns a new unused source ID. This generated ID is the same that a call to {@link add_source} would return.
+   */
+  get_next_source_id(): int;
+  /** Returns the light mask of the occlusion layer. */
+  get_occlusion_layer_light_mask(layer_index: int): int;
+  /** Returns if the occluders from this layer use `sdf_collision`. */
+  get_occlusion_layer_sdf_collision(layer_index: int): boolean;
+  /** Returns the occlusion layers count. */
+  get_occlusion_layers_count(): int;
+  /** Returns the {@link TileMapPattern} at the given `index`. */
+  get_pattern(index?: int): TileMapPattern | null;
+  /** Returns the number of {@link TileMapPattern} this tile set handles. */
+  get_patterns_count(): int;
+  /**
+   * Returns the collision layer (as in the physics server) bodies on the given TileSet's physics layer are in.
+   */
+  get_physics_layer_collision_layer(layer_index: int): int;
+  /** Returns the collision mask of bodies on the given TileSet's physics layer. */
+  get_physics_layer_collision_mask(layer_index: int): int;
+  /** Returns the collision priority of bodies on the given TileSet's physics layer. */
+  get_physics_layer_collision_priority(layer_index: int): float;
+  /** Returns the physics material of bodies on the given TileSet's physics layer. */
+  get_physics_layer_physics_material(layer_index: int): PhysicsMaterial | null;
+  /** Returns the physics layers count. */
+  get_physics_layers_count(): int;
+  /** Returns the {@link TileSetSource} with ID `source_id`. */
+  get_source(source_id: int): TileSetSource | null;
+  /** Returns the number of {@link TileSetSource} in this TileSet. */
+  get_source_count(): int;
+  /** Returns the source ID for source with index `index`. */
+  get_source_id(index: int): int;
+  /**
+   * Returns the source-level proxy for the given source identifier.
+   * If the TileSet has no proxy for the given identifier, returns -1.
+   */
+  get_source_level_tile_proxy(source_from: int): int;
+  /** Returns a terrain's color. */
+  get_terrain_color(terrain_set: int, terrain_index: int): Color;
+  /** Returns a terrain's name. */
+  get_terrain_name(terrain_set: int, terrain_index: int): string;
+  /** Returns a terrain set mode. */
+  get_terrain_set_mode(terrain_set: int): int;
+  /** Returns the terrain sets count. */
+  get_terrain_sets_count(): int;
+  /** Returns the number of terrains in the given terrain set. */
+  get_terrains_count(terrain_set: int): int;
+  /** Returns if there is an alternative-level proxy for the given identifiers. */
+  has_alternative_level_tile_proxy(source_from: int, coords_from: Vector2i | Vector2, alternative_from: int): boolean;
+  /** Returns if there is a coodinates-level proxy for the given identifiers. */
+  has_coords_level_tile_proxy(source_from: int, coords_from: Vector2i | Vector2): boolean;
+  /** Returns if there is a custom data layer named `layer_name`. */
+  has_custom_data_layer_by_name(layer_name: string | NodePath): boolean;
+  /** Returns if this TileSet has a source for the given source ID. */
+  has_source(source_id: int): boolean;
+  /** Returns if there is a source-level proxy for the given source ID. */
+  has_source_level_tile_proxy(source_from: int): boolean;
+  /**
+   * According to the configured proxies, maps the provided identifiers to a new set of identifiers. The source ID, atlas coordinates ID and alternative tile ID are returned as a 3 elements Array.
+   * This function first look for matching alternative-level proxies, then coordinates-level proxies, then source-level proxies.
+   * If no proxy corresponding to provided identifiers are found, returns the same values the ones used as arguments.
+   */
+  map_tile_proxy(source_from: int, coords_from: Vector2i | Vector2, alternative_from: int): Array<unknown>;
+  /**
+   * Moves the custom data layer at index `layer_index` to the given position `to_position` in the array. Also updates the atlas tiles accordingly.
+   */
+  move_custom_data_layer(layer_index: int, to_position: int): void;
+  /**
+   * Moves the navigation layer at index `layer_index` to the given position `to_position` in the array. Also updates the atlas tiles accordingly.
+   */
+  move_navigation_layer(layer_index: int, to_position: int): void;
+  /**
+   * Moves the occlusion layer at index `layer_index` to the given position `to_position` in the array. Also updates the atlas tiles accordingly.
+   */
+  move_occlusion_layer(layer_index: int, to_position: int): void;
+  /**
+   * Moves the physics layer at index `layer_index` to the given position `to_position` in the array. Also updates the atlas tiles accordingly.
+   */
+  move_physics_layer(layer_index: int, to_position: int): void;
+  /**
+   * Moves the terrain at index `terrain_index` for terrain set `terrain_set` to the given position `to_position` in the array. Also updates the atlas tiles accordingly.
+   */
+  move_terrain(terrain_set: int, terrain_index: int, to_position: int): void;
+  /**
+   * Moves the terrain set at index `terrain_set` to the given position `to_position` in the array. Also updates the atlas tiles accordingly.
+   */
+  move_terrain_set(terrain_set: int, to_position: int): void;
+  /** Removes an alternative-level proxy for the given identifiers. */
+  remove_alternative_level_tile_proxy(source_from: int, coords_from: Vector2i | Vector2, alternative_from: int): void;
+  /** Removes a coordinates-level proxy for the given identifiers. */
+  remove_coords_level_tile_proxy(source_from: int, coords_from: Vector2i | Vector2): void;
+  /** Removes the custom data layer at index `layer_index`. Also updates the atlas tiles accordingly. */
+  remove_custom_data_layer(layer_index: int): void;
+  /** Removes the navigation layer at index `layer_index`. Also updates the atlas tiles accordingly. */
+  remove_navigation_layer(layer_index: int): void;
+  /** Removes the occlusion layer at index `layer_index`. Also updates the atlas tiles accordingly. */
+  remove_occlusion_layer(layer_index: int): void;
+  /** Remove the {@link TileMapPattern} at the given index. */
+  remove_pattern(index: int): void;
+  /** Removes the physics layer at index `layer_index`. Also updates the atlas tiles accordingly. */
+  remove_physics_layer(layer_index: int): void;
+  /** Removes the source with the given source ID. */
+  remove_source(source_id: int): void;
+  /** Removes a source-level tile proxy. */
+  remove_source_level_tile_proxy(source_from: int): void;
+  /**
+   * Removes the terrain at index `terrain_index` in the given terrain set `terrain_set`. Also updates the atlas tiles accordingly.
+   */
+  remove_terrain(terrain_set: int, terrain_index: int): void;
+  /** Removes the terrain set at index `terrain_set`. Also updates the atlas tiles accordingly. */
+  remove_terrain_set(terrain_set: int): void;
+  /**
+   * Create an alternative-level proxy for the given identifiers. A proxy will map set of tile identifiers to another set of identifiers.
+   * Proxied tiles can be automatically replaced in TileMapLayer nodes using the editor.
+   */
+  set_alternative_level_tile_proxy(source_from: int, coords_from: Vector2i | Vector2, alternative_from: int, source_to: int, coords_to: Vector2i | Vector2, alternative_to: int): void;
+  /**
+   * Creates a coordinates-level proxy for the given identifiers. A proxy will map set of tile identifiers to another set of identifiers. The alternative tile ID is kept the same when using coordinates-level proxies.
+   * Proxied tiles can be automatically replaced in TileMapLayer nodes using the editor.
+   */
+  set_coords_level_tile_proxy(p_source_from: int, coords_from: Vector2i | Vector2, source_to: int, coords_to: Vector2i | Vector2): void;
+  /**
+   * Sets the name of the custom data layer identified by the given index. Names are identifiers of the layer therefore if the name is already taken it will fail and raise an error.
+   */
+  set_custom_data_layer_name(layer_index: int, layer_name: string | NodePath): void;
+  /** Sets the type of the custom data layer identified by the given index. */
+  set_custom_data_layer_type(layer_index: int, layer_type: int): void;
+  /**
+   * Based on `value`, enables or disables the specified navigation layer of the TileSet navigation data layer identified by the given `layer_index`, given a navigation_layers `layer_number` between 1 and 32.
+   */
+  set_navigation_layer_layer_value(layer_index: int, layer_number: int, value: boolean): void;
+  /**
+   * Sets the navigation layers (as in the navigation server) for navigation regions in the given TileSet navigation layer.
+   */
+  set_navigation_layer_layers(layer_index: int, layers: int): void;
+  /**
+   * Sets the occlusion layer (as in the rendering server) for occluders in the given TileSet occlusion layer.
+   */
+  set_occlusion_layer_light_mask(layer_index: int, light_mask: int): void;
+  /** Enables or disables SDF collision for occluders in the given TileSet occlusion layer. */
+  set_occlusion_layer_sdf_collision(layer_index: int, sdf_collision: boolean): void;
+  /** Sets the collision layer (as in the physics server) for bodies in the given TileSet physics layer. */
+  set_physics_layer_collision_layer(layer_index: int, layer: int): void;
+  /** Sets the collision mask for bodies in the given TileSet physics layer. */
+  set_physics_layer_collision_mask(layer_index: int, mask: int): void;
+  /** Sets the collision priority for bodies in the given TileSet physics layer. */
+  set_physics_layer_collision_priority(layer_index: int, priority: float): void;
+  /** Sets the physics material for bodies in the given TileSet physics layer. */
+  set_physics_layer_physics_material(layer_index: int, physics_material: PhysicsMaterial): void;
+  /** Changes a source's ID. */
+  set_source_id(source_id: int, new_source_id: int): void;
+  /**
+   * Creates a source-level proxy for the given source ID. A proxy will map set of tile identifiers to another set of identifiers. Both the atlas coordinates ID and the alternative tile ID are kept the same when using source-level proxies.
+   * Proxied tiles can be automatically replaced in TileMapLayer nodes using the editor.
+   */
+  set_source_level_tile_proxy(source_from: int, source_to: int): void;
+  /**
+   * Sets a terrain's color. This color is used for identifying the different terrains in the TileSet editor.
+   */
+  set_terrain_color(terrain_set: int, terrain_index: int, color: Color): void;
+  /** Sets a terrain's name. */
+  set_terrain_name(terrain_set: int, terrain_index: int, name: string | NodePath): void;
+  /**
+   * Sets a terrain mode. Each mode determines which bits of a tile shape is used to match the neighboring tiles' terrains.
+   */
+  set_terrain_set_mode(terrain_set: int, mode: int): void;
+
+  // enum TileShape
+  /** Rectangular tile shape. */
+  static readonly TILE_SHAPE_SQUARE: int;
+  /**
+   * Diamond tile shape (for isometric look).
+   * **Note:** Isometric {@link TileSet} works best if all sibling {@link TileMapLayer}s and their parent inheriting from {@link Node2D} have Y-sort enabled.
+   */
+  static readonly TILE_SHAPE_ISOMETRIC: int;
+  /** Rectangular tile shape with one row/column out of two offset by half a tile. */
+  static readonly TILE_SHAPE_HALF_OFFSET_SQUARE: int;
+  /** Hexagonal tile shape. */
+  static readonly TILE_SHAPE_HEXAGON: int;
+  // enum TileLayout
+  /**
+   * Tile coordinates layout where both axis stay consistent with their respective local horizontal and vertical axis.
+   */
+  static readonly TILE_LAYOUT_STACKED: int;
+  /** Same as {@link TILE_LAYOUT_STACKED}, but the first half-offset is negative instead of positive. */
+  static readonly TILE_LAYOUT_STACKED_OFFSET: int;
+  /**
+   * Tile coordinates layout where the horizontal axis stay horizontal, and the vertical one goes down-right.
+   */
+  static readonly TILE_LAYOUT_STAIRS_RIGHT: int;
+  /**
+   * Tile coordinates layout where the vertical axis stay vertical, and the horizontal one goes down-right.
+   */
+  static readonly TILE_LAYOUT_STAIRS_DOWN: int;
+  /**
+   * Tile coordinates layout where the horizontal axis goes up-right, and the vertical one goes down-right.
+   */
+  static readonly TILE_LAYOUT_DIAMOND_RIGHT: int;
+  /**
+   * Tile coordinates layout where the horizontal axis goes down-right, and the vertical one goes down-left.
+   */
+  static readonly TILE_LAYOUT_DIAMOND_DOWN: int;
+  // enum TileOffsetAxis
+  /** Horizontal half-offset. */
+  static readonly TILE_OFFSET_AXIS_HORIZONTAL: int;
+  /** Vertical half-offset. */
+  static readonly TILE_OFFSET_AXIS_VERTICAL: int;
+  // enum CellNeighbor
+  /** Neighbor on the right side. */
+  static readonly CELL_NEIGHBOR_RIGHT_SIDE: int;
+  /** Neighbor in the right corner. */
+  static readonly CELL_NEIGHBOR_RIGHT_CORNER: int;
+  /** Neighbor on the bottom right side. */
+  static readonly CELL_NEIGHBOR_BOTTOM_RIGHT_SIDE: int;
+  /** Neighbor in the bottom right corner. */
+  static readonly CELL_NEIGHBOR_BOTTOM_RIGHT_CORNER: int;
+  /** Neighbor on the bottom side. */
+  static readonly CELL_NEIGHBOR_BOTTOM_SIDE: int;
+  /** Neighbor in the bottom corner. */
+  static readonly CELL_NEIGHBOR_BOTTOM_CORNER: int;
+  /** Neighbor on the bottom left side. */
+  static readonly CELL_NEIGHBOR_BOTTOM_LEFT_SIDE: int;
+  /** Neighbor in the bottom left corner. */
+  static readonly CELL_NEIGHBOR_BOTTOM_LEFT_CORNER: int;
+  /** Neighbor on the left side. */
+  static readonly CELL_NEIGHBOR_LEFT_SIDE: int;
+  /** Neighbor in the left corner. */
+  static readonly CELL_NEIGHBOR_LEFT_CORNER: int;
+  /** Neighbor on the top left side. */
+  static readonly CELL_NEIGHBOR_TOP_LEFT_SIDE: int;
+  /** Neighbor in the top left corner. */
+  static readonly CELL_NEIGHBOR_TOP_LEFT_CORNER: int;
+  /** Neighbor on the top side. */
+  static readonly CELL_NEIGHBOR_TOP_SIDE: int;
+  /** Neighbor in the top corner. */
+  static readonly CELL_NEIGHBOR_TOP_CORNER: int;
+  /** Neighbor on the top right side. */
+  static readonly CELL_NEIGHBOR_TOP_RIGHT_SIDE: int;
+  /** Neighbor in the top right corner. */
+  static readonly CELL_NEIGHBOR_TOP_RIGHT_CORNER: int;
+  // enum TerrainMode
+  /** Requires both corners and side to match with neighboring tiles' terrains. */
+  static readonly TERRAIN_MODE_MATCH_CORNERS_AND_SIDES: int;
+  /** Requires corners to match with neighboring tiles' terrains. */
+  static readonly TERRAIN_MODE_MATCH_CORNERS: int;
+  /** Requires sides to match with neighboring tiles' terrains. */
+  static readonly TERRAIN_MODE_MATCH_SIDES: int;
+}

package/typings/classes/TileSetAtlasSource.d.ts

@@ -0,0 +1,160 @@
+// AUTO-GENERATED from Godot class documentation.
+// Manual overrides applied from typings-overrides/*.d.ts
+
+/** Exposes a 2D atlas texture as a set of tiles for a {@link TileSet} resource. */
+declare class TileSetAtlasSource extends TileSetSource {
+  /** Margins, in pixels, to offset the origin of the grid in the texture. */
+  margins: Vector2i;
+  /** Separation, in pixels, between each tile texture region of the grid. */
+  separation: Vector2i;
+  /** The atlas texture. */
+  texture: Texture2D | null;
+  /**
+   * The base tile size in the texture (in pixel). This size must be bigger than or equal to the TileSet's `tile_size` value.
+   */
+  texture_region_size: Vector2i;
+  /**
+   * If `true`, generates an internal texture with an additional one pixel padding around each tile. Texture padding avoids a common artifact where lines appear between tiles.
+   * Disabling this setting might lead a small performance improvement, as generating the internal texture requires both memory and processing time when the TileSetAtlasSource resource is modified.
+   */
+  use_texture_padding: boolean;
+  set_margins(value: Vector2i | Vector2): void;
+  get_margins(): Vector2i;
+  set_separation(value: Vector2i | Vector2): void;
+  get_separation(): Vector2i;
+  set_texture(value: Texture2D | null): void;
+  get_texture(): Texture2D | null;
+  set_texture_region_size(value: Vector2i | Vector2): void;
+  get_texture_region_size(): Vector2i;
+  set_use_texture_padding(value: boolean): void;
+  get_use_texture_padding(): boolean;
+
+  /**
+   * Removes all tiles that don't fit the available texture area. This method iterates over all the source's tiles, so it's advised to use {@link has_tiles_outside_texture} beforehand.
+   */
+  clear_tiles_outside_texture(): void;
+  /**
+   * Creates an alternative tile for the tile at coordinates `atlas_coords`. If `alternative_id_override` is -1, give it an automatically generated unique ID, or assigns it the given ID otherwise.
+   * Returns the new alternative identifier, or -1 if the alternative could not be created with a provided `alternative_id_override`.
+   */
+  create_alternative_tile(atlas_coords: Vector2i | Vector2, alternative_id_override?: int): int;
+  /** Creates a new tile at coordinates `atlas_coords` with the given `size`. */
+  create_tile(atlas_coords: Vector2i | Vector2, size?: Vector2i | Vector2): void;
+  /**
+   * Returns the atlas grid size, which depends on how many tiles can fit in the texture. It thus depends on the {@link texture}'s size, the atlas {@link margins}, and the tiles' {@link texture_region_size}.
+   */
+  get_atlas_grid_size(): Vector2i;
+  /** Returns the alternative ID a following call to {@link create_alternative_tile} would return. */
+  get_next_alternative_tile_id(atlas_coords: Vector2i | Vector2): int;
+  /**
+   * If {@link use_texture_padding} is `false`, returns {@link texture}. Otherwise, returns an internal {@link ImageTexture} created that includes the padding.
+   */
+  get_runtime_texture(): Texture2D | null;
+  /**
+   * Returns the region of the tile at coordinates `atlas_coords` for the given `frame` inside the texture returned by {@link get_runtime_texture}.
+   * **Note:** If {@link use_texture_padding} is `false`, returns the same as {@link get_tile_texture_region}.
+   */
+  get_runtime_tile_texture_region(atlas_coords: Vector2i | Vector2, frame: int): Rect2i;
+  /** Returns how many columns the tile at `atlas_coords` has in its animation layout. */
+  get_tile_animation_columns(atlas_coords: Vector2i | Vector2): int;
+  /**
+   * Returns the animation frame duration of frame `frame_index` for the tile at coordinates `atlas_coords`.
+   */
+  get_tile_animation_frame_duration(atlas_coords: Vector2i | Vector2, frame_index: int): float;
+  /** Returns how many animation frames has the tile at coordinates `atlas_coords`. */
+  get_tile_animation_frames_count(atlas_coords: Vector2i | Vector2): int;
+  /**
+   * Returns the tile animation mode of the tile at `atlas_coords`. See also {@link set_tile_animation_mode}.
+   */
+  get_tile_animation_mode(atlas_coords: Vector2i | Vector2): int;
+  /**
+   * Returns the separation (as in the atlas grid) between each frame of an animated tile at coordinates `atlas_coords`.
+   */
+  get_tile_animation_separation(atlas_coords: Vector2i | Vector2): Vector2i;
+  /** Returns the animation speed of the tile at coordinates `atlas_coords`. */
+  get_tile_animation_speed(atlas_coords: Vector2i | Vector2): float;
+  /**
+   * Returns the sum of the sum of the frame durations of the tile at coordinates `atlas_coords`. This value needs to be divided by the animation speed to get the actual animation loop duration.
+   */
+  get_tile_animation_total_duration(atlas_coords: Vector2i | Vector2): float;
+  /**
+   * If there is a tile covering the `atlas_coords` coordinates, returns the top-left coordinates of the tile (thus its coordinate ID). Returns `Vector2i(-1, -1)` otherwise.
+   */
+  get_tile_at_coords(atlas_coords: Vector2i | Vector2): Vector2i;
+  /** Returns the {@link TileData} object for the given atlas coordinates and alternative ID. */
+  get_tile_data(atlas_coords: Vector2i | Vector2, alternative_tile: int): TileData | null;
+  /** Returns the size of the tile (in the grid coordinates system) at coordinates `atlas_coords`. */
+  get_tile_size_in_atlas(atlas_coords: Vector2i | Vector2): Vector2i;
+  /**
+   * Returns a tile's texture region in the atlas texture. For animated tiles, a `frame` argument might be provided for the different frames of the animation.
+   */
+  get_tile_texture_region(atlas_coords: Vector2i | Vector2, frame?: int): Rect2i;
+  /**
+   * Returns an array of tiles coordinates ID that will be automatically removed when modifying one or several of those properties: `texture`, `margins`, `separation` or `texture_region_size`. This can be used to undo changes that would have caused tiles data loss.
+   */
+  get_tiles_to_be_removed_on_change(texture: Texture2D, margins: Vector2i | Vector2, separation: Vector2i | Vector2, texture_region_size: Vector2i | Vector2): PackedVector2Array;
+  /**
+   * Returns whether there is enough room in an atlas to create/modify a tile with the given properties. If `ignored_tile` is provided, act as is the given tile was not present in the atlas. This may be used when you want to modify a tile's properties.
+   */
+  has_room_for_tile(atlas_coords: Vector2i | Vector2, size: Vector2i | Vector2, animation_columns: int, animation_separation: Vector2i | Vector2, frames_count: int, ignored_tile?: Vector2i | Vector2): boolean;
+  /**
+   * Checks if the source has any tiles that don't fit the texture area (either partially or completely).
+   */
+  has_tiles_outside_texture(): boolean;
+  /**
+   * Move the tile and its alternatives at the `atlas_coords` coordinates to the `new_atlas_coords` coordinates with the `new_size` size. This functions will fail if a tile is already present in the given area.
+   * If `new_atlas_coords` is `Vector2i(-1, -1)`, keeps the tile's coordinates. If `new_size` is `Vector2i(-1, -1)`, keeps the tile's size.
+   * To avoid an error, first check if a move is possible using {@link has_room_for_tile}.
+   */
+  move_tile_in_atlas(atlas_coords: Vector2i | Vector2, new_atlas_coords?: Vector2i | Vector2, new_size?: Vector2i | Vector2): void;
+  /**
+   * Remove a tile's alternative with alternative ID `alternative_tile`.
+   * Calling this function with `alternative_tile` equals to 0 will fail, as the base tile alternative cannot be removed.
+   */
+  remove_alternative_tile(atlas_coords: Vector2i | Vector2, alternative_tile: int): void;
+  /** Remove a tile and its alternative at coordinates `atlas_coords`. */
+  remove_tile(atlas_coords: Vector2i | Vector2): void;
+  /**
+   * Change a tile's alternative ID from `alternative_tile` to `new_id`.
+   * Calling this function with `new_id` of 0 will fail, as the base tile alternative cannot be moved.
+   */
+  set_alternative_tile_id(atlas_coords: Vector2i | Vector2, alternative_tile: int, new_id: int): void;
+  /**
+   * Sets the number of columns in the animation layout of the tile at coordinates `atlas_coords`. If set to 0, then the different frames of the animation are laid out as a single horizontal line in the atlas.
+   */
+  set_tile_animation_columns(atlas_coords: Vector2i | Vector2, frame_columns: int): void;
+  /**
+   * Sets the animation frame `duration` of frame `frame_index` for the tile at coordinates `atlas_coords`.
+   */
+  set_tile_animation_frame_duration(atlas_coords: Vector2i | Vector2, frame_index: int, duration: float): void;
+  /** Sets how many animation frames the tile at coordinates `atlas_coords` has. */
+  set_tile_animation_frames_count(atlas_coords: Vector2i | Vector2, frames_count: int): void;
+  /**
+   * Sets the tile animation mode of the tile at `atlas_coords` to `mode`. See also {@link get_tile_animation_mode}.
+   */
+  set_tile_animation_mode(atlas_coords: Vector2i | Vector2, mode: int): void;
+  /**
+   * Sets the margin (in grid tiles) between each tile in the animation layout of the tile at coordinates `atlas_coords` has.
+   */
+  set_tile_animation_separation(atlas_coords: Vector2i | Vector2, separation: Vector2i | Vector2): void;
+  /** Sets the animation speed of the tile at coordinates `atlas_coords` has. */
+  set_tile_animation_speed(atlas_coords: Vector2i | Vector2, speed: float): void;
+
+  // enum TileAnimationMode
+  /** Tile animations start at same time, looking identical. */
+  static readonly TILE_ANIMATION_MODE_DEFAULT: int;
+  /** Tile animations start at random times, looking varied. */
+  static readonly TILE_ANIMATION_MODE_RANDOM_START_TIMES: int;
+  /** Represents the size of the {@link TileAnimationMode} enum. */
+  static readonly TILE_ANIMATION_MODE_MAX: int;
+
+  /**
+   * Represents cell's horizontal flip flag. Should be used directly with {@link TileMapLayer} to flip placed tiles by altering their alternative IDs.
+   * **Note:** These transformations can be combined to do the equivalent of 0, 90, 180, and 270 degree rotations, as shown below:
+   */
+  static readonly TRANSFORM_FLIP_H: int;
+  /** Represents cell's vertical flip flag. See {@link TRANSFORM_FLIP_H} for usage. */
+  static readonly TRANSFORM_FLIP_V: int;
+  /** Represents cell's transposed flag. See {@link TRANSFORM_FLIP_H} for usage. */
+  static readonly TRANSFORM_TRANSPOSE: int;
+}

package/typings/classes/TileSetScenesCollectionSource.d.ts

@@ -0,0 +1,37 @@
+// AUTO-GENERATED from Godot class documentation.
+// Manual overrides applied from typings-overrides/*.d.ts
+
+/** Exposes a set of scenes as tiles for a {@link TileSet} resource. */
+declare class TileSetScenesCollectionSource extends TileSetSource {
+  /**
+   * Creates a scene-based tile out of the given scene.
+   * Returns a newly generated unique ID.
+   */
+  create_scene_tile(packed_scene: PackedScene, id_override?: int): int;
+  /** Returns the scene ID a following call to {@link create_scene_tile} would return. */
+  get_next_scene_tile_id(): int;
+  /** Returns whether the scene tile with `id` displays a placeholder in the editor. */
+  get_scene_tile_display_placeholder(id: int): boolean;
+  /** Returns the scene tile ID of the scene tile at `index`. */
+  get_scene_tile_id(index: int): int;
+  /** Returns the {@link PackedScene} resource of scene tile with `id`. */
+  get_scene_tile_scene(id: int): PackedScene | null;
+  /** Returns the number or scene tiles this TileSet source has. */
+  get_scene_tiles_count(): int;
+  /** Returns whether this TileSet source has a scene tile with `id`. */
+  has_scene_tile_id(id: int): boolean;
+  /** Remove the scene tile with `id`. */
+  remove_scene_tile(id: int): void;
+  /**
+   * Sets whether or not the scene tile with `id` should display a placeholder in the editor. This might be useful for scenes that are not visible.
+   */
+  set_scene_tile_display_placeholder(id: int, display_placeholder: boolean): void;
+  /**
+   * Changes a scene tile's ID from `id` to `new_id`. This will fail if there is already a tile with an ID equal to `new_id`.
+   */
+  set_scene_tile_id(id: int, new_id: int): void;
+  /**
+   * Assigns a {@link PackedScene} resource to the scene tile with `id`. This will fail if the scene does not extend {@link CanvasItem}, as positioning properties are needed to place the scene on the {@link TileMapLayer}.
+   */
+  set_scene_tile_scene(id: int, packed_scene: PackedScene): void;
+}

package/typings/classes/TileSetSource.d.ts

@@ -0,0 +1,24 @@
+// AUTO-GENERATED from Godot class documentation.
+// Manual overrides applied from typings-overrides/*.d.ts
+
+/** Exposes a set of tiles for a {@link TileSet} resource. */
+declare class TileSetSource extends Resource {
+  /** Returns the alternative ID for the tile with coordinates ID `atlas_coords` at index `index`. */
+  get_alternative_tile_id(atlas_coords: Vector2i | Vector2, index: int): int;
+  /**
+   * Returns the number of alternatives tiles for the coordinates ID `atlas_coords`.
+   * For {@link TileSetAtlasSource}, this always return at least 1, as the base tile with ID 0 is always part of the alternatives list.
+   * Returns -1 if there is not tile at the given coords.
+   */
+  get_alternative_tiles_count(atlas_coords: Vector2i | Vector2): int;
+  /** Returns the tile coordinates ID of the tile with index `index`. */
+  get_tile_id(index: int): Vector2i;
+  /** Returns how many tiles this atlas source defines (not including alternative tiles). */
+  get_tiles_count(): int;
+  /**
+   * Returns if the base tile at coordinates `atlas_coords` has an alternative with ID `alternative_tile`.
+   */
+  has_alternative_tile(atlas_coords: Vector2i | Vector2, alternative_tile: int): boolean;
+  /** Returns if this atlas has a tile with coordinates ID `atlas_coords`. */
+  has_tile(atlas_coords: Vector2i | Vector2): boolean;
+}