koffi 0.9.5 → 0.9.8

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/eratosthenes.fs

@@ -0,0 +1,59 @@
+#version 330
+
+/*************************************************************************************
+
+  The Sieve of Eratosthenes -- a simple shader by ProfJski
+  An early prime number sieve: https://en.wikipedia.org/wiki/Sieve_of_Eratosthenes
+
+  The screen is divided into a square grid of boxes, each representing an integer value.
+  Each integer is tested to see if it is a prime number.  Primes are colored white.
+  Non-primes are colored with a color that indicates the smallest factor which evenly divdes our integer.
+
+  You can change the scale variable to make a larger or smaller grid.
+  Total number of integers displayed = scale squared, so scale = 100 tests the first 10,000 integers.
+
+  WARNING: If you make scale too large, your GPU may bog down!
+
+***************************************************************************************/
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Output fragment color
+out vec4 finalColor;
+
+// Make a nice spectrum of colors based on counter and maxSize
+vec4 Colorizer(float counter, float maxSize)
+{
+    float red = 0.0, green = 0.0, blue = 0.0;
+    float normsize = counter/maxSize;
+
+    red = smoothstep(0.3, 0.7, normsize);
+    green = sin(3.14159*normsize);
+    blue = 1.0 - smoothstep(0.0, 0.4, normsize);
+
+    return vec4(0.8*red, 0.8*green, 0.8*blue, 1.0);
+}
+
+void main()
+{
+    vec4 color = vec4(1.0);
+    float scale = 1000.0; // Makes 100x100 square grid. Change this variable to make a smaller or larger grid.
+    int value = int(scale*floor(fragTexCoord.y*scale)+floor(fragTexCoord.x*scale));  // Group pixels into boxes representing integer values
+
+    if ((value == 0) || (value == 1) || (value == 2)) finalColor = vec4(1.0);
+    else
+    {
+        for (int i = 2; (i < max(2, sqrt(value) + 1)); i++)
+        {
+            if ((value - i*floor(float(value)/float(i))) == 0)
+            {
+                color = Colorizer(float(i), scale);
+                //break;    // Uncomment to color by the largest factor instead
+            }
+        }
+
+        finalColor = color;
+    }
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/fisheye.fs

@@ -0,0 +1,40 @@
+#version 330
+
+in vec2 fragTexCoord;
+
+out vec4 fragColor;
+
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// NOTE: Add here your custom variables
+
+const float PI = 3.1415926535;
+
+void main()
+{
+    float aperture = 178.0;
+    float apertureHalf = 0.5 * aperture * (PI / 180.0);
+    float maxFactor = sin(apertureHalf);
+
+    vec2 uv = vec2(0);
+    vec2 xy = 2.0 * fragTexCoord.xy - 1.0;
+    float d = length(xy);
+
+    if (d < (2.0 - maxFactor))
+    {
+        d = length(xy * maxFactor);
+        float z = sqrt(1.0 - d * d);
+        float r = atan(d, z) / PI;
+        float phi = atan(xy.y, xy.x);
+
+        uv.x = r * cos(phi) + 0.5;
+        uv.y = r * sin(phi) + 0.5;
+    }
+    else
+    {
+        uv = fragTexCoord.xy;
+    }
+
+    fragColor = texture(texture0, uv);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/fog.fs

@@ -0,0 +1,95 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+in vec3 fragPosition;
+in vec3 fragNormal;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// Output fragment color
+out vec4 finalColor;
+
+// NOTE: Add here your custom variables
+
+#define     MAX_LIGHTS              4
+#define     LIGHT_DIRECTIONAL       0
+#define     LIGHT_POINT             1
+
+struct MaterialProperty {
+    vec3 color;
+    int useSampler;
+    sampler2D sampler;
+};
+
+struct Light {
+    int enabled;
+    int type;
+    vec3 position;
+    vec3 target;
+    vec4 color;
+};
+
+// Input lighting values
+uniform Light lights[MAX_LIGHTS];
+uniform vec4 ambient;
+uniform vec3 viewPos;
+uniform float fogDensity;
+
+void main()
+{
+    // Texel color fetching from texture sampler
+    vec4 texelColor = texture(texture0, fragTexCoord);
+    vec3 lightDot = vec3(0.0);
+    vec3 normal = normalize(fragNormal);
+    vec3 viewD = normalize(viewPos - fragPosition);
+    vec3 specular = vec3(0.0);
+
+    // NOTE: Implement here your fragment shader code
+
+    for (int i = 0; i < MAX_LIGHTS; i++)
+    {
+        if (lights[i].enabled == 1)
+        {
+            vec3 light = vec3(0.0);
+
+            if (lights[i].type == LIGHT_DIRECTIONAL) light = -normalize(lights[i].target - lights[i].position);
+            if (lights[i].type == LIGHT_POINT) light = normalize(lights[i].position - fragPosition);
+
+            float NdotL = max(dot(normal, light), 0.0);
+            lightDot += lights[i].color.rgb*NdotL;
+
+            float specCo = 0.0;
+            if (NdotL > 0.0) specCo = pow(max(0.0, dot(viewD, reflect(-(light), normal))), 16.0); // Shine: 16.0
+            specular += specCo;
+        }
+    }
+
+    finalColor = (texelColor*((colDiffuse + vec4(specular,1))*vec4(lightDot, 1.0)));
+    finalColor += texelColor*(ambient/10.0);
+
+    // Gamma correction
+    finalColor = pow(finalColor, vec4(1.0/2.2));
+
+    // Fog calculation
+    float dist = length(viewPos - fragPosition);
+
+    // these could be parameters...
+    const vec4 fogColor = vec4(0.5, 0.5, 0.5, 1.0);
+    //const float fogDensity = 0.16;
+
+    // Exponential fog
+    float fogFactor = 1.0/exp((dist*fogDensity)*(dist*fogDensity));
+
+    // Linear fog (less nice)
+    //const float fogStart = 2.0;
+    //const float fogEnd = 10.0;
+    //float fogFactor = (fogEnd - dist)/(fogEnd - fogStart);
+
+    fogFactor = clamp(fogFactor, 0.0, 1.0);
+
+    finalColor = mix(fogColor, finalColor, fogFactor);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/grayscale.fs

@@ -0,0 +1,26 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// Output fragment color
+out vec4 finalColor;
+
+// NOTE: Add here your custom variables
+
+void main()
+{
+    // Texel color fetching from texture sampler
+    vec4 texelColor = texture(texture0, fragTexCoord)*colDiffuse*fragColor;
+
+    // Convert texel color to grayscale using NTSC conversion weights
+    float gray = dot(texelColor.rgb, vec3(0.299, 0.587, 0.114));
+
+    // Calculate final fragment color
+    finalColor = vec4(gray, gray, gray, texelColor.a);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/julia_set.fs

@@ -0,0 +1,81 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Output fragment color
+out vec4 finalColor;
+
+uniform vec2 screenDims;        // Dimensions of the screen
+uniform vec2 c;                 // c.x = real, c.y = imaginary component. Equation done is z^2 + c
+uniform vec2 offset;            // Offset of the scale.
+uniform float zoom;             // Zoom of the scale.
+
+const int MAX_ITERATIONS = 255; // Max iterations to do.
+
+// Square a complex number
+vec2 ComplexSquare(vec2 z)
+{
+    return vec2(
+        z.x * z.x - z.y * z.y,
+        z.x * z.y * 2.0
+    );
+}
+
+// Convert Hue Saturation Value (HSV) color into RGB
+vec3 Hsv2rgb(vec3 c)
+{
+    vec4 K = vec4(1.0, 2.0 / 3.0, 1.0 / 3.0, 3.0);
+    vec3 p = abs(fract(c.xxx + K.xyz) * 6.0 - K.www);
+    return c.z * mix(K.xxx, clamp(p - K.xxx, 0.0, 1.0), c.y);
+}
+
+void main()
+{
+    /**********************************************************************************************
+      Julia sets use a function z^2 + c, where c is a constant.
+      This function is iterated until the nature of the point is determined.
+
+      If the magnitude of the number becomes greater than 2, then from that point onward
+      the number will get bigger and bigger, and will never get smaller (tends towards infinity).
+      2^2 = 4, 4^2 = 8 and so on.
+      So at 2 we stop iterating.
+
+      If the number is below 2, we keep iterating.
+      But when do we stop iterating if the number is always below 2 (it converges)?
+      That is what MAX_ITERATIONS is for.
+      Then we can divide the iterations by the MAX_ITERATIONS value to get a normalized value that we can
+      then map to a color.
+
+      We use dot product (z.x * z.x + z.y * z.y) to determine the magnitude (length) squared.
+      And once the magnitude squared is > 4, then magnitude > 2 is also true (saves computational power).
+    *************************************************************************************************/
+
+    // The pixel coordinates are scaled so they are on the mandelbrot scale
+    // NOTE: fragTexCoord already comes as normalized screen coordinates but offset must be normalized before scaling and zoom
+    vec2 z = vec2((fragTexCoord.x + offset.x/screenDims.x)*2.5/zoom, (fragTexCoord.y + offset.y/screenDims.y)*1.5/zoom);
+
+    int iterations = 0;
+    for (iterations = 0; iterations < MAX_ITERATIONS; iterations++)
+    {
+        z = ComplexSquare(z) + c;  // Iterate function
+
+        if (dot(z, z) > 4.0) break;
+    }
+
+    // Another few iterations decreases errors in the smoothing calculation.
+    // See http://linas.org/art-gallery/escape/escape.html for more information.
+    z = ComplexSquare(z) + c;
+    z = ComplexSquare(z) + c;
+
+    // This last part smooths the color (again see link above).
+    float smoothVal = float(iterations) + 1.0 - (log(log(length(z)))/log(2.0));
+
+    // Normalize the value so it is between 0 and 1.
+    float norm = smoothVal/float(MAX_ITERATIONS);
+
+    // If in set, color black. 0.999 allows for some float accuracy error.
+    if (norm > 0.999) finalColor = vec4(0.0, 0.0, 0.0, 1.0);
+    else finalColor = vec4(Hsv2rgb(vec3(norm, 1.0, 1.0)), 1.0);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/lighting.fs

@@ -0,0 +1,82 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec3 fragPosition;
+in vec2 fragTexCoord;
+in vec4 fragColor;
+in vec3 fragNormal;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// Output fragment color
+out vec4 finalColor;
+
+// NOTE: Add here your custom variables
+
+#define     MAX_LIGHTS              4
+#define     LIGHT_DIRECTIONAL       0
+#define     LIGHT_POINT             1
+
+struct MaterialProperty {
+    vec3 color;
+    int useSampler;
+    sampler2D sampler;
+};
+
+struct Light {
+    int enabled;
+    int type;
+    vec3 position;
+    vec3 target;
+    vec4 color;
+};
+
+// Input lighting values
+uniform Light lights[MAX_LIGHTS];
+uniform vec4 ambient;
+uniform vec3 viewPos;
+
+void main()
+{
+    // Texel color fetching from texture sampler
+    vec4 texelColor = texture(texture0, fragTexCoord);
+    vec3 lightDot = vec3(0.0);
+    vec3 normal = normalize(fragNormal);
+    vec3 viewD = normalize(viewPos - fragPosition);
+    vec3 specular = vec3(0.0);
+
+    // NOTE: Implement here your fragment shader code
+
+    for (int i = 0; i < MAX_LIGHTS; i++)
+    {
+        if (lights[i].enabled == 1)
+        {
+            vec3 light = vec3(0.0);
+
+            if (lights[i].type == LIGHT_DIRECTIONAL)
+            {
+                light = -normalize(lights[i].target - lights[i].position);
+            }
+
+            if (lights[i].type == LIGHT_POINT)
+            {
+                light = normalize(lights[i].position - fragPosition);
+            }
+
+            float NdotL = max(dot(normal, light), 0.0);
+            lightDot += lights[i].color.rgb*NdotL;
+
+            float specCo = 0.0;
+            if (NdotL > 0.0) specCo = pow(max(0.0, dot(viewD, reflect(-(light), normal))), 16.0); // 16 refers to shine
+            specular += specCo;
+        }
+    }
+
+    finalColor = (texelColor*((colDiffuse + vec4(specular, 1.0))*vec4(lightDot, 1.0)));
+    finalColor += texelColor*(ambient/10.0)*colDiffuse;
+
+    // Gamma correction
+    finalColor = pow(finalColor, vec4(1.0/2.2));
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/mask.fs

@@ -0,0 +1,22 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform sampler2D mask;
+uniform int frame;
+
+// Output fragment color
+out vec4 finalColor;
+
+void main()
+{
+    vec4 maskColour = texture(mask, fragTexCoord + vec2(sin(-frame/150.0)/10.0, cos(-frame/170.0)/10.0));
+    if (maskColour.r < 0.25) discard;
+    vec4 texelColor = texture(texture0, fragTexCoord + vec2(sin(frame/90.0)/8.0, cos(frame/60.0)/8.0));
+
+    finalColor = texelColor*maskColour;
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/outline.fs

@@ -0,0 +1,35 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+uniform vec2 textureSize;
+uniform float outlineSize;
+uniform vec4 outlineColor;
+
+// Output fragment color
+out vec4 finalColor;
+
+void main()
+{
+    vec4 texel = texture(texture0, fragTexCoord);   // Get texel color
+    vec2 texelScale = vec2(0.0);
+    texelScale.x = outlineSize/textureSize.x;
+    texelScale.y = outlineSize/textureSize.y;
+
+    // We sample four corner texels, but only for the alpha channel (this is for the outline)
+    vec4 corners = vec4(0.0);
+    corners.x = texture(texture0, fragTexCoord + vec2(texelScale.x, texelScale.y)).a;
+    corners.y = texture(texture0, fragTexCoord + vec2(texelScale.x, -texelScale.y)).a;
+    corners.z = texture(texture0, fragTexCoord + vec2(-texelScale.x, texelScale.y)).a;
+    corners.w = texture(texture0, fragTexCoord + vec2(-texelScale.x, -texelScale.y)).a;
+
+    float outline = min(dot(corners, vec4(1.0)), 1.0);
+    vec4 color = mix(vec4(0.0), outlineColor, outline);
+    finalColor = mix(color, texel, texel.a);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/overdraw.fs

@@ -0,0 +1,26 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// Output fragment color
+out vec4 finalColor;
+
+// NOTE: Add here your custom variables
+
+void main()
+{
+    // To show overdraw, we just render all the fragments
+    // with a solid color and some transparency
+
+    // NOTE: This is not a postpro render,
+    // it will only render all screen texture in a plain color
+
+    finalColor = vec4(1.0, 0.0, 0.0, 0.2);
+}
+

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/palette_switch.fs

@@ -0,0 +1,30 @@
+#version 330
+
+const int colors = 8;
+
+// Input fragment attributes (from fragment shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform ivec3 palette[colors];
+
+// Output fragment color
+out vec4 finalColor;
+
+void main()
+{
+    // Texel color fetching from texture sampler
+    vec4 texelColor = texture(texture0, fragTexCoord)*fragColor;
+
+    // Convert the (normalized) texel color RED component (GB would work, too)
+    // to the palette index by scaling up from [0, 1] to [0, 255].
+    int index = int(texelColor.r*255.0);
+    ivec3 color = palette[index];
+
+    // Calculate final fragment color. Note that the palette color components
+    // are defined in the range [0, 255] and need to be normalized to [0, 1]
+    // for OpenGL to work.
+    finalColor = vec4(color/255.0, texelColor.a);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/pixelizer.fs

@@ -0,0 +1,33 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// Output fragment color
+out vec4 finalColor;
+
+// NOTE: Add here your custom variables
+
+// NOTE: Render size values must be passed from code
+const float renderWidth = 800;
+const float renderHeight = 450;
+
+uniform float pixelWidth = 5.0;
+uniform float pixelHeight = 5.0;
+
+void main()
+{
+    float dx = pixelWidth*(1.0/renderWidth);
+    float dy = pixelHeight*(1.0/renderHeight);
+
+    vec2 coord = vec2(dx*floor(fragTexCoord.x/dx), dy*floor(fragTexCoord.y/dy));
+
+    vec3 tc = texture(texture0, coord).rgb;
+
+    finalColor = vec4(tc, 1.0);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/posterization.fs

@@ -0,0 +1,31 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// Output fragment color
+out vec4 finalColor;
+
+// NOTE: Add here your custom variables
+
+float gamma = 0.6;
+float numColors = 8.0;
+
+void main()
+{
+    // Texel color fetching from texture sampler
+    vec3 texelColor = texture(texture0, fragTexCoord.xy).rgb;
+
+    texelColor = pow(texelColor, vec3(gamma, gamma, gamma));
+    texelColor = texelColor*numColors;
+    texelColor = floor(texelColor);
+    texelColor = texelColor/numColors;
+    texelColor = pow(texelColor, vec3(1.0/gamma));
+
+    finalColor = vec4(texelColor, 1.0);
+}

package/vendor/raylib/examples/shaders/resources/shaders/glsl330/predator.fs

@@ -0,0 +1,32 @@
+#version 330
+
+// Input vertex attributes (from vertex shader)
+in vec2 fragTexCoord;
+in vec4 fragColor;
+
+// Input uniform values
+uniform sampler2D texture0;
+uniform vec4 colDiffuse;
+
+// Output fragment color
+out vec4 finalColor;
+
+// NOTE: Add here your custom variables
+
+void main()
+{
+    // Texel color fetching from texture sampler
+    vec3 texelColor = texture(texture0, fragTexCoord).rgb;
+    vec3 colors[3];
+    colors[0] = vec3(0.0, 0.0, 1.0);
+    colors[1] = vec3(1.0, 1.0, 0.0);
+    colors[2] = vec3(1.0, 0.0, 0.0);
+
+    float lum = (texelColor.r + texelColor.g + texelColor.b)/3.0;
+
+    int ix = (lum < 0.5)? 0:1;
+
+    vec3 tc = mix(colors[ix], colors[ix + 1], (lum - float(ix)*0.5)/0.5);
+
+    finalColor = vec4(tc, 1.0);
+}