dsh-drawai 0.4.1 → 0.4.3

package/lib/motion/shotcraft/upstream/demos/effects/fui-hud-moves/ReticleLockOn.tsx

@@ -1,164 +1,164 @@
-// reticle-lock-on —— 准星咬合（钢铁侠 HUD / 安德的游戏）
-// FakeDashboard 静置。四个 L 形角标组成的取景框从画外飞入（大框），
-// 超调回弹后收缩贴紧目标卡片四角"咔"地咬合定格；咬合帧卡片微亮 +
-// 上方弹一行小标签。画面不冻结，是运动中的捕获。
-// f0–14 面板静置；f14–24 飞入；f20–46 收缩（含过冲回弹）；f46 咬合；
-// 标签 f48–58 弹出；之后静止 ≥30f（90f 总长）。
-//
-// 质感升级：补导出时长（工作台原先从源码猜成 24f，只演到飞入一半）；目标框改用 fixture 真实
-// 卡片几何（524×454，原 425 高差了 29px 咬不住下沿）；角标从 10px 实心黑块改为 5px 圆头强调色
-// 笔画 + 白色描边衬底（任何底色上都清楚）+ 中心十字刻度；飞入段按速度做斜向运动模糊；
-// 收缩改为与飞入重叠、不对称缓动的连续过冲（不再每个关键帧都停一下）；咬合帧角标一次"咔"的
-// 收紧脉冲，目标微亮做成裁进圆角的顶亮渐变 + 强调色描边，其余画面轻压暗聚焦；标签换成出版级
-// 深色胶囊（状态点 + 卡名 + 等宽锁定编号）；整段相机极缓推向目标，"在流动中点名"。
-import React from 'react';
-import { useCurrentFrame, interpolate, Easing } from 'remotion';
-import { G, FakeDashboard } from '../../_fixtures/Fixtures';
-import { EASE, FONT, Grain, SpeedBlur, mix, ramp } from '../../_fixtures/Polish';
-
-export const RETICLE_LOCK_ON_DURATION = 90; // 3s：飞入 → 咬合 → 标签 → 静止 ≥1s
-
-// 目标：variant A 网格第 2 张卡（第一行中间）。fixture 几何：卡 524×454 @ x=808, y=108
-const CARD_X = 808;
-const CARD_Y = 108;
-const CARD_W = 524;
-const CARD_H = 454;
-const PAD = 16; // 咬合后角标与卡的呼吸距
-
-const TCX = CARD_X + CARD_W / 2;
-const TCY = CARD_Y + CARD_H / 2;
-
-const FLY_IN = 14; // 飞入开始
-const FLY_END = 24; // 飞入结束（大框就位）
-const SHRINK0 = 20; // 收缩起点（与飞入尾段重叠 4f，动作连贯不停顿）
-const UNDER = 40; // 收过头（0.94×）的时刻
-const LOCK_END = 46; // 咬合帧
-const LABEL0 = LOCK_END + 2;
-const LABEL_END = LOCK_END + 12;
-
-const ARM = 58; // L 臂长
-const THICK = 5; // L 笔画粗
-const INK = G.accent; // 角标色：唯一强调色
-
-const clamp = { extrapolateLeft: 'clamp' as const, extrapolateRight: 'clamp' as const };
-
-// 飞入位移（px）：整框从右下画外冲进来，ease-out cubic
-const flyAt = (f: number) => {
-  const t = interpolate(f, [FLY_IN, FLY_END], [0, 1], { easing: Easing.out(Easing.cubic), ...clamp });
-  return { x: (1 - t) * 1100, y: (1 - t) * 620 };
-};
-// 收缩倍率：2.2 → 0.94（swift 不对称缓动，冲过头）→ 1（ease-out 回弹落定）
-const shrinkAt = (f: number) =>
-  f < UNDER ? mix(2.2, 0.94, ramp(f, SHRINK0, UNDER - SHRINK0, EASE.swift)) : mix(0.94, 1, ramp(f, UNDER, LOCK_END - UNDER, EASE.out));
-
-export const ReticleLockOn: React.FC = () => {
-  const frame = useCurrentFrame();
-
-  const fly = flyAt(frame);
-  const fly0 = flyAt(frame - 0.5);
-  const fly1 = flyAt(frame + 0.5);
-  const shrink = shrinkAt(frame);
-  // 咬合"咔"：锁定瞬间角标再向内收紧 6px 后弹回（4f）
-  const bite = interpolate(frame, [LOCK_END, LOCK_END + 1, LOCK_END + 5], [0, 1, 0], clamp);
-  const hw = (CARD_W / 2 + PAD) * shrink - 6 * bite;
-  const hh = (CARD_H / 2 + PAD) * shrink - 6 * bite;
-
-  // 咬合帧：卡片微亮（快闪 0.55 后停在 0.28；裁进卡片圆角）
-  const glow = interpolate(frame, [LOCK_END, LOCK_END + 3, LOCK_END + 10], [0, 0.55, 0.28], clamp);
-  // 聚焦：目标之外轻压暗（锁定后 10f 内到 0.10）
-  const focus = interpolate(frame, [LOCK_END - 2, LOCK_END + 10], [0, 1], { easing: Easing.out(Easing.cubic), ...clamp });
-
-  // 标签：咬合后从左上角标上方弹出（scale back 过冲 + 淡入）
-  const labelT = interpolate(frame, [LABEL0, LABEL_END], [0, 1], { easing: Easing.out(Easing.back(1.8)), ...clamp });
-
-  // 相机：全程极缓推向目标（1 → 1.035），smooth in-out，无起止速度突变
-  const cam = mix(1, 1.035, ramp(frame, 0, RETICLE_LOCK_ON_DURATION - 1, EASE.smooth));
-
-  const showReticle = frame >= FLY_IN;
-  const locked = frame >= LOCK_END;
-  const reticleOp = interpolate(frame, [FLY_IN, FLY_IN + 3], [0, 1], clamp);
-
-  // 四个 L 角：位置 = 中心 ± (hw, hh)，各自镜像
-  const corners = [
-    { x: TCX - hw, y: TCY - hh, sx: 1, sy: 1 },
-    { x: TCX + hw, y: TCY - hh, sx: -1, sy: 1 },
-    { x: TCX - hw, y: TCY + hh, sx: 1, sy: -1 },
-    { x: TCX + hw, y: TCY + hh, sx: -1, sy: -1 },
-  ];
-  // L 笔画：白色衬底（外扩 2px）+ 强调色芯，圆头
-  const stroke = (w: number, h: number, under: boolean): React.CSSProperties => ({
-    position: 'absolute', left: under ? -2 : 0, top: under ? -2 : 0,
-    width: w + (under ? 4 : 0), height: h + (under ? 4 : 0), borderRadius: 4,
-    background: under ? 'rgba(255,255,255,0.92)' : INK,
-    boxShadow: under ? '0 2px 6px rgba(16,18,40,0.18)' : 'none',
-  });
-
-  return (
-    <div style={{ width: 1920, height: 1080, background: G.bg, overflow: 'hidden', position: 'relative' }}>
-      <div style={{ position: 'absolute', inset: 0, transform: `scale(${cam})`, transformOrigin: `${TCX}px ${TCY}px` }}>
-        <FakeDashboard variant="A" />
-        {/* 聚焦压暗：目标卡外一圈巨型 box-shadow（目标处镂空、圆角一致） */}
-        {focus > 0 && (
-          <div style={{
-            position: 'absolute', left: CARD_X, top: CARD_Y, width: CARD_W, height: CARD_H, borderRadius: 14,
-            boxShadow: `0 0 0 3000px rgba(16,18,28,${(0.1 * focus).toFixed(3)})`, pointerEvents: 'none',
-          }} />
-        )}
-        {/* 咬合微亮层：条件渲染，锁定前不存在；顶亮底淡的渐变裁进圆角 + 强调色细描边 */}
-        {locked && (
-          <div style={{
-            position: 'absolute', left: CARD_X, top: CARD_Y, width: CARD_W, height: CARD_H, borderRadius: 14,
-            overflow: 'hidden', pointerEvents: 'none',
-            boxShadow: `0 0 0 1.5px rgba(91,99,211,${(0.55 * focus).toFixed(3)}), 0 18px 48px -16px rgba(91,99,211,${(0.35 * focus).toFixed(3)})`,
-          }}>
-            <div style={{
-              position: 'absolute', inset: 0, opacity: glow,
-              background: 'linear-gradient(180deg, rgba(255,255,255,1) 0%, rgba(255,255,255,0.55) 60%, rgba(255,255,255,0.35) 100%)',
-            }} />
-          </div>
-        )}
-        {showReticle && (
-          <SpeedBlur vx={fly1.x - fly0.x} vy={fly1.y - fly0.y} amount={0.3} max={22}>
-            <div style={{ position: 'absolute', left: 0, top: 0, transform: `translate(${fly.x}px, ${fly.y}px)`, opacity: reticleOp }}>
-              {corners.map((c, i) => (
-                <div key={i} style={{ position: 'absolute', left: c.x, top: c.y, transform: `scale(${c.sx}, ${c.sy})`, transformOrigin: '0 0' }}>
-                  {/* L 形角标：横臂 + 竖臂（先衬底后芯） */}
-                  <div style={stroke(ARM, THICK, true)} />
-                  <div style={stroke(THICK, ARM, true)} />
-                  <div style={stroke(ARM, THICK, false)} />
-                  <div style={stroke(THICK, ARM, false)} />
-                </div>
-              ))}
-              {/* 中心十字刻度：飞行中可见，锁定后淡出（准星→取景框的语义交接） */}
-              {[0, 1].map((k) => (
-                <div key={k} style={{
-                  position: 'absolute', left: TCX - (k ? 1.5 : 14), top: TCY - (k ? 14 : 1.5), width: k ? 3 : 28, height: k ? 28 : 3,
-                  borderRadius: 2, background: INK, opacity: 0.8 * (1 - focus), boxShadow: '0 0 0 2px rgba(255,255,255,0.85)',
-                }} />
-              ))}
-            </div>
-          </SpeedBlur>
-        )}
-        {/* 小标签：左上角标正上方弹出（落在顶栏空白区，不压邻卡标题） */}
-        {frame >= LABEL0 && (
-          <div style={{
-            position: 'absolute', left: TCX - hw + 2, top: TCY - hh - 70,
-            transform: `scale(${labelT})`, transformOrigin: '0 100%', opacity: Math.min(1, labelT * 1.5),
-            display: 'flex', alignItems: 'center', gap: 14, whiteSpace: 'nowrap',
-            background: 'linear-gradient(180deg, #23252c 0%, #17181d 100%)', color: '#fff', fontFamily: FONT.sans,
-            padding: '10px 16px 10px 14px', borderRadius: 12,
-            boxShadow: 'inset 0 1px 0 rgba(255,255,255,0.10), 0 0 0 1px rgba(0,0,0,0.25), 0 2px 4px rgba(16,18,24,0.18), 0 16px 32px -10px rgba(16,18,24,0.45)',
-          }}>
-            <div style={{ width: 12, height: 12, borderRadius: 6, background: '#8a91ff', boxShadow: '0 0 0 4px rgba(138,145,255,0.22)' }} />
-            <span style={{ fontSize: 30, fontWeight: 600, letterSpacing: '-0.015em' }}>Top pages</span>
-            <span style={{
-              fontFamily: FONT.mono, fontSize: 18, fontWeight: 500, letterSpacing: '0.08em', color: 'rgba(255,255,255,0.55)',
-              padding: '4px 8px', borderRadius: 6, background: 'rgba(255,255,255,0.07)',
-            }}>LOCK 02</span>
-          </div>
-        )}
-      </div>
-      <Grain opacity={0.035} />
-    </div>
-  );
-};
+// reticle-lock-on —— 准星咬合（钢铁侠 HUD / 安德的游戏）
+// FakeDashboard 静置。四个 L 形角标组成的取景框从画外飞入（大框），
+// 超调回弹后收缩贴紧目标卡片四角"咔"地咬合定格；咬合帧卡片微亮 +
+// 上方弹一行小标签。画面不冻结，是运动中的捕获。
+// f0–14 面板静置；f14–24 飞入；f20–46 收缩（含过冲回弹）；f46 咬合；
+// 标签 f48–58 弹出；之后静止 ≥30f（90f 总长）。
+//
+// 质感升级：补导出时长（工作台原先从源码猜成 24f，只演到飞入一半）；目标框改用 fixture 真实
+// 卡片几何（524×454，原 425 高差了 29px 咬不住下沿）；角标从 10px 实心黑块改为 5px 圆头强调色
+// 笔画 + 白色描边衬底（任何底色上都清楚）+ 中心十字刻度；飞入段按速度做斜向运动模糊；
+// 收缩改为与飞入重叠、不对称缓动的连续过冲（不再每个关键帧都停一下）；咬合帧角标一次"咔"的
+// 收紧脉冲，目标微亮做成裁进圆角的顶亮渐变 + 强调色描边，其余画面轻压暗聚焦；标签换成出版级
+// 深色胶囊（状态点 + 卡名 + 等宽锁定编号）；整段相机极缓推向目标，"在流动中点名"。
+import React from 'react';
+import { useCurrentFrame, interpolate, Easing } from 'remotion';
+import { G, FakeDashboard } from '../../_fixtures/Fixtures';
+import { EASE, FONT, Grain, SpeedBlur, mix, ramp } from '../../_fixtures/Polish';
+
+export const RETICLE_LOCK_ON_DURATION = 90; // 3s：飞入 → 咬合 → 标签 → 静止 ≥1s
+
+// 目标：variant A 网格第 2 张卡（第一行中间）。fixture 几何：卡 524×454 @ x=808, y=108
+const CARD_X = 808;
+const CARD_Y = 108;
+const CARD_W = 524;
+const CARD_H = 454;
+const PAD = 16; // 咬合后角标与卡的呼吸距
+
+const TCX = CARD_X + CARD_W / 2;
+const TCY = CARD_Y + CARD_H / 2;
+
+const FLY_IN = 14; // 飞入开始
+const FLY_END = 24; // 飞入结束（大框就位）
+const SHRINK0 = 20; // 收缩起点（与飞入尾段重叠 4f，动作连贯不停顿）
+const UNDER = 40; // 收过头（0.94×）的时刻
+const LOCK_END = 46; // 咬合帧
+const LABEL0 = LOCK_END + 2;
+const LABEL_END = LOCK_END + 12;
+
+const ARM = 58; // L 臂长
+const THICK = 5; // L 笔画粗
+const INK = G.accent; // 角标色：唯一强调色
+
+const clamp = { extrapolateLeft: 'clamp' as const, extrapolateRight: 'clamp' as const };
+
+// 飞入位移（px）：整框从右下画外冲进来，ease-out cubic
+const flyAt = (f: number) => {
+  const t = interpolate(f, [FLY_IN, FLY_END], [0, 1], { easing: Easing.out(Easing.cubic), ...clamp });
+  return { x: (1 - t) * 1100, y: (1 - t) * 620 };
+};
+// 收缩倍率：2.2 → 0.94（swift 不对称缓动，冲过头）→ 1（ease-out 回弹落定）
+const shrinkAt = (f: number) =>
+  f < UNDER ? mix(2.2, 0.94, ramp(f, SHRINK0, UNDER - SHRINK0, EASE.swift)) : mix(0.94, 1, ramp(f, UNDER, LOCK_END - UNDER, EASE.out));
+
+export const ReticleLockOn: React.FC = () => {
+  const frame = useCurrentFrame();
+
+  const fly = flyAt(frame);
+  const fly0 = flyAt(frame - 0.5);
+  const fly1 = flyAt(frame + 0.5);
+  const shrink = shrinkAt(frame);
+  // 咬合"咔"：锁定瞬间角标再向内收紧 6px 后弹回（4f）
+  const bite = interpolate(frame, [LOCK_END, LOCK_END + 1, LOCK_END + 5], [0, 1, 0], clamp);
+  const hw = (CARD_W / 2 + PAD) * shrink - 6 * bite;
+  const hh = (CARD_H / 2 + PAD) * shrink - 6 * bite;
+
+  // 咬合帧：卡片微亮（快闪 0.55 后停在 0.28；裁进卡片圆角）
+  const glow = interpolate(frame, [LOCK_END, LOCK_END + 3, LOCK_END + 10], [0, 0.55, 0.28], clamp);
+  // 聚焦：目标之外轻压暗（锁定后 10f 内到 0.10）
+  const focus = interpolate(frame, [LOCK_END - 2, LOCK_END + 10], [0, 1], { easing: Easing.out(Easing.cubic), ...clamp });
+
+  // 标签：咬合后从左上角标上方弹出（scale back 过冲 + 淡入）
+  const labelT = interpolate(frame, [LABEL0, LABEL_END], [0, 1], { easing: Easing.out(Easing.back(1.8)), ...clamp });
+
+  // 相机：全程极缓推向目标（1 → 1.035），smooth in-out，无起止速度突变
+  const cam = mix(1, 1.035, ramp(frame, 0, RETICLE_LOCK_ON_DURATION - 1, EASE.smooth));
+
+  const showReticle = frame >= FLY_IN;
+  const locked = frame >= LOCK_END;
+  const reticleOp = interpolate(frame, [FLY_IN, FLY_IN + 3], [0, 1], clamp);
+
+  // 四个 L 角：位置 = 中心 ± (hw, hh)，各自镜像
+  const corners = [
+    { x: TCX - hw, y: TCY - hh, sx: 1, sy: 1 },
+    { x: TCX + hw, y: TCY - hh, sx: -1, sy: 1 },
+    { x: TCX - hw, y: TCY + hh, sx: 1, sy: -1 },
+    { x: TCX + hw, y: TCY + hh, sx: -1, sy: -1 },
+  ];
+  // L 笔画：白色衬底（外扩 2px）+ 强调色芯，圆头
+  const stroke = (w: number, h: number, under: boolean): React.CSSProperties => ({
+    position: 'absolute', left: under ? -2 : 0, top: under ? -2 : 0,
+    width: w + (under ? 4 : 0), height: h + (under ? 4 : 0), borderRadius: 4,
+    background: under ? 'rgba(255,255,255,0.92)' : INK,
+    boxShadow: under ? '0 2px 6px rgba(16,18,40,0.18)' : 'none',
+  });
+
+  return (
+    <div style={{ width: 1920, height: 1080, background: G.bg, overflow: 'hidden', position: 'relative' }}>
+      <div style={{ position: 'absolute', inset: 0, transform: `scale(${cam})`, transformOrigin: `${TCX}px ${TCY}px` }}>
+        <FakeDashboard variant="A" />
+        {/* 聚焦压暗：目标卡外一圈巨型 box-shadow（目标处镂空、圆角一致） */}
+        {focus > 0 && (
+          <div style={{
+            position: 'absolute', left: CARD_X, top: CARD_Y, width: CARD_W, height: CARD_H, borderRadius: 14,
+            boxShadow: `0 0 0 3000px rgba(16,18,28,${(0.1 * focus).toFixed(3)})`, pointerEvents: 'none',
+          }} />
+        )}
+        {/* 咬合微亮层：条件渲染，锁定前不存在；顶亮底淡的渐变裁进圆角 + 强调色细描边 */}
+        {locked && (
+          <div style={{
+            position: 'absolute', left: CARD_X, top: CARD_Y, width: CARD_W, height: CARD_H, borderRadius: 14,
+            overflow: 'hidden', pointerEvents: 'none',
+            boxShadow: `0 0 0 1.5px rgba(91,99,211,${(0.55 * focus).toFixed(3)}), 0 18px 48px -16px rgba(91,99,211,${(0.35 * focus).toFixed(3)})`,
+          }}>
+            <div style={{
+              position: 'absolute', inset: 0, opacity: glow,
+              background: 'linear-gradient(180deg, rgba(255,255,255,1) 0%, rgba(255,255,255,0.55) 60%, rgba(255,255,255,0.35) 100%)',
+            }} />
+          </div>
+        )}
+        {showReticle && (
+          <SpeedBlur vx={fly1.x - fly0.x} vy={fly1.y - fly0.y} amount={0.3} max={22}>
+            <div style={{ position: 'absolute', left: 0, top: 0, transform: `translate(${fly.x}px, ${fly.y}px)`, opacity: reticleOp }}>
+              {corners.map((c, i) => (
+                <div key={i} style={{ position: 'absolute', left: c.x, top: c.y, transform: `scale(${c.sx}, ${c.sy})`, transformOrigin: '0 0' }}>
+                  {/* L 形角标：横臂 + 竖臂（先衬底后芯） */}
+                  <div style={stroke(ARM, THICK, true)} />
+                  <div style={stroke(THICK, ARM, true)} />
+                  <div style={stroke(ARM, THICK, false)} />
+                  <div style={stroke(THICK, ARM, false)} />
+                </div>
+              ))}
+              {/* 中心十字刻度：飞行中可见，锁定后淡出（准星→取景框的语义交接） */}
+              {[0, 1].map((k) => (
+                <div key={k} style={{
+                  position: 'absolute', left: TCX - (k ? 1.5 : 14), top: TCY - (k ? 14 : 1.5), width: k ? 3 : 28, height: k ? 28 : 3,
+                  borderRadius: 2, background: INK, opacity: 0.8 * (1 - focus), boxShadow: '0 0 0 2px rgba(255,255,255,0.85)',
+                }} />
+              ))}
+            </div>
+          </SpeedBlur>
+        )}
+        {/* 小标签：左上角标正上方弹出（落在顶栏空白区，不压邻卡标题） */}
+        {frame >= LABEL0 && (
+          <div style={{
+            position: 'absolute', left: TCX - hw + 2, top: TCY - hh - 70,
+            transform: `scale(${labelT})`, transformOrigin: '0 100%', opacity: Math.min(1, labelT * 1.5),
+            display: 'flex', alignItems: 'center', gap: 14, whiteSpace: 'nowrap',
+            background: 'linear-gradient(180deg, #23252c 0%, #17181d 100%)', color: '#fff', fontFamily: FONT.sans,
+            padding: '10px 16px 10px 14px', borderRadius: 12,
+            boxShadow: 'inset 0 1px 0 rgba(255,255,255,0.10), 0 0 0 1px rgba(0,0,0,0.25), 0 2px 4px rgba(16,18,24,0.18), 0 16px 32px -10px rgba(16,18,24,0.45)',
+          }}>
+            <div style={{ width: 12, height: 12, borderRadius: 6, background: '#8a91ff', boxShadow: '0 0 0 4px rgba(138,145,255,0.22)' }} />
+            <span style={{ fontSize: 30, fontWeight: 600, letterSpacing: '-0.015em' }}>Top pages</span>
+            <span style={{
+              fontFamily: FONT.mono, fontSize: 18, fontWeight: 500, letterSpacing: '0.08em', color: 'rgba(255,255,255,0.55)',
+              padding: '4px 8px', borderRadius: 6, background: 'rgba(255,255,255,0.07)',
+            }}>LOCK 02</span>
+          </div>
+        )}
+      </div>
+      <Grain opacity={0.035} />
+    </div>
+  );
+};