com.googler.python 1.1.4 → 1.1.5

package/python3.6.2/lib/python3.6/config-3.6m-arm-linux-androideabi/Setup

@@ -1,397 +0,0 @@
-# -*- makefile -*-
-# The file Setup is used by the makesetup script to construct the files
-# Makefile and config.c, from Makefile.pre and config.c.in,
-# respectively.  The file Setup itself is initially copied from
-# Setup.dist; once it exists it will not be overwritten, so you can edit
-# Setup to your heart's content.  Note that Makefile.pre is created
-# from Makefile.pre.in by the toplevel configure script.
-
-# (VPATH notes: Setup and Makefile.pre are in the build directory, as
-# are Makefile and config.c; the *.in and *.dist files are in the source
-# directory.)
-
-# Each line in this file describes one or more optional modules.
-# Modules enabled here will not be compiled by the setup.py script,
-# so the file can be used to override setup.py's behavior.
-
-# Lines have the following structure:
-#
-# <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]
-#
-# <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)
-# <cpparg> is anything starting with -I, -D, -U or -C
-# <library> is anything ending in .a or beginning with -l or -L
-# <module> is anything else but should be a valid Python
-# identifier (letters, digits, underscores, beginning with non-digit)
-#
-# (As the makesetup script changes, it may recognize some other
-# arguments as well, e.g. *.so and *.sl as libraries.  See the big
-# case statement in the makesetup script.)
-#
-# Lines can also have the form
-#
-# <name> = <value>
-#
-# which defines a Make variable definition inserted into Makefile.in
-#
-# Finally, if a line contains just the word "*shared*" (without the
-# quotes but with the stars), then the following modules will not be
-# built statically.  The build process works like this:
-#
-# 1. Build all modules that are declared as static in Modules/Setup,
-#    combine them into libpythonxy.a, combine that into python.
-# 2. Build all modules that are listed as shared in Modules/Setup.
-# 3. Invoke setup.py. That builds all modules that
-#    a) are not builtin, and
-#    b) are not listed in Modules/Setup, and
-#    c) can be build on the target
-#
-# Therefore, modules declared to be shared will not be
-# included in the config.c file, nor in the list of objects to be
-# added to the library archive, and their linker options won't be
-# added to the linker options. Rules to create their .o files and
-# their shared libraries will still be added to the Makefile, and
-# their names will be collected in the Make variable SHAREDMODS.  This
-# is used to build modules as shared libraries.  (They can be
-# installed using "make sharedinstall", which is implied by the
-# toplevel "make install" target.)  (For compatibility,
-# *noconfig* has the same effect as *shared*.)
-#
-# In addition, *static* explicitly declares the following modules to
-# be static.  Lines containing "*static*" and "*shared*" may thus
-# alternate throughout this file.
-
-# NOTE: As a standard policy, as many modules as can be supported by a
-# platform should be present.  The distribution comes with all modules
-# enabled that are supported by most platforms and don't require you
-# to ftp sources from elsewhere.
-
-
-# Some special rules to define PYTHONPATH.
-# Edit the definitions below to indicate which options you are using.
-# Don't add any whitespace or comments!
-
-# Directories where library files get installed.
-# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.
-DESTLIB=$(LIBDEST)
-MACHDESTLIB=$(BINLIBDEST)
-
-# NOTE: all the paths are now relative to the prefix that is computed
-# at run time!
-
-# Standard path -- don't edit.
-# No leading colon since this is the first entry.
-# Empty since this is now just the runtime prefix.
-DESTPATH=
-
-# Site specific path components -- should begin with : if non-empty
-SITEPATH=
-
-# Standard path components for test modules
-TESTPATH=
-
-# Path components for machine- or system-dependent modules and shared libraries
-MACHDEPPATH=:$(PLATDIR)
-EXTRAMACHDEPPATH=
-
-COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)
-PYTHONPATH=$(COREPYTHONPATH)
-
-
-# The modules listed here can't be built as shared libraries for
-# various reasons; therefore they are listed here instead of in the
-# normal order.
-
-# This only contains the minimal set of modules required to run the
-# setup.py script in the root of the Python source tree.
-
-posix posixmodule.c		# posix (UNIX) system calls
-errno errnomodule.c		# posix (UNIX) errno values
-pwd pwdmodule.c			# this is needed to find out the user's home dir
-				# if $HOME is not set
-_sre _sre.c			# Fredrik Lundh's new regular expressions
-_codecs _codecsmodule.c		# access to the builtin codecs and codec registry
-_weakref _weakref.c		# weak references
-_functools _functoolsmodule.c   # Tools for working with functions and callable objects
-_operator _operator.c	        # operator.add() and similar goodies
-_collections _collectionsmodule.c # Container types
-itertools itertoolsmodule.c    # Functions creating iterators for efficient looping
-atexit atexitmodule.c      # Register functions to be run at interpreter-shutdown
-_signal signalmodule.c
-_stat _stat.c			# stat.h interface
-time timemodule.c	# -lm # time operations and variables
-
-# access to ISO C locale support
-#_locale _localemodule.c  # -lintl
-
-# Standard I/O baseline
-_io -I$(srcdir)/Modules/_io _io/_iomodule.c _io/iobase.c _io/fileio.c _io/bytesio.c _io/bufferedio.c _io/textio.c _io/stringio.c
-
-# The zipimport module is always imported at startup. Having it as a
-# builtin module avoids some bootstrapping problems and reduces overhead.
-zipimport zipimport.c
-
-# faulthandler module
-faulthandler faulthandler.c
-
-# debug tool to trace memory blocks allocated by Python
-_tracemalloc _tracemalloc.c hashtable.c
-
-# The rest of the modules listed in this file are all commented out by
-# default.  Usually they can be detected and built as dynamically
-# loaded modules by the new setup.py script added in Python 2.1.  If
-# you're on a platform that doesn't support dynamic loading, want to
-# compile modules statically into the Python binary, or need to
-# specify some odd set of compiler switches, you can uncomment the
-# appropriate lines below.
-
-# ======================================================================
-
-# The Python symtable module depends on .h files that setup.py doesn't track
-_symtable symtablemodule.c
-
-# Uncommenting the following line tells makesetup that all following
-# modules are to be built as shared libraries (see above for more
-# detail; also note that *static* reverses this effect):
-
-#*shared*
-
-# GNU readline.  Unlike previous Python incarnations, GNU readline is
-# now incorporated in an optional module, configured in the Setup file
-# instead of by a configure script switch.  You may have to insert a
-# -L option pointing to the directory where libreadline.* lives,
-# and you may have to change -ltermcap to -ltermlib or perhaps remove
-# it, depending on your system -- see the GNU readline instructions.
-# It's okay for this to be a shared library, too.
-
-#readline readline.c -lreadline -ltermcap
-
-
-# Modules that should always be present (non UNIX dependent):
-
-#array arraymodule.c	# array objects
-#cmath cmathmodule.c _math.c # -lm # complex math library functions
-#math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
-#_struct _struct.c	# binary structure packing/unpacking
-#_weakref _weakref.c	# basic weak reference support
-#_testcapi _testcapimodule.c    # Python C API test module
-#_random _randommodule.c	# Random number generator
-#_elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c	# elementtree accelerator
-#_pickle _pickle.c	# pickle accelerator
-#_datetime _datetimemodule.c	# datetime accelerator
-#_bisect _bisectmodule.c	# Bisection algorithms
-#_heapq _heapqmodule.c	# Heap queue algorithm
-#_asyncio _asynciomodule.c  # Fast asyncio Future
-
-#unicodedata unicodedata.c    # static Unicode character database
-
-
-# Modules with some UNIX dependencies -- on by default:
-# (If you have a really backward UNIX, select and socket may not be
-# supported...)
-
-#fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)
-#spwd spwdmodule.c		# spwd(3)
-#grp grpmodule.c		# grp(3)
-#select selectmodule.c	# select(2); not on ancient System V
-
-# Memory-mapped files (also works on Win32).
-#mmap mmapmodule.c
-
-# CSV file helper
-#_csv _csv.c
-
-# Socket module helper for socket(2)
-#_socket socketmodule.c
-
-# Socket module helper for SSL support; you must comment out the other
-# socket line above, and possibly edit the SSL variable:
-#SSL=/usr/local/ssl
-#_ssl _ssl.c \
-#	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
-#	-L$(SSL)/lib -lssl -lcrypto
-
-# The crypt module is now disabled by default because it breaks builds
-# on many systems (where -lcrypt is needed), e.g. Linux (I believe).
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#_crypt _cryptmodule.c # -lcrypt	# crypt(3); needs -lcrypt on some systems
-
-
-# Some more UNIX dependent modules -- off by default, since these
-# are not supported by all UNIX systems:
-
-#nis nismodule.c -lnsl	# Sun yellow pages -- not everywhere
-#termios termios.c	# Steen Lumholt's termios module
-#resource resource.c	# Jeremy Hylton's rlimit interface
-
-#_posixsubprocess _posixsubprocess.c  # POSIX subprocess module helper
-
-# Multimedia modules -- off by default.
-# These don't work for 64-bit platforms!!!
-# #993173 says audioop works on 64-bit platforms, though.
-# These represent audio samples or images as strings:
-
-#audioop audioop.c	# Operations on audio samples
-
-
-# Note that the _md5 and _sha modules are normally only built if the
-# system does not have the OpenSSL libs containing an optimized version.
-
-# The _md5 module implements the RSA Data Security, Inc. MD5
-# Message-Digest Algorithm, described in RFC 1321.
-
-#_md5 md5module.c
-
-
-# The _sha module implements the SHA checksum algorithms.
-# (NIST's Secure Hash Algorithms.)
-#_sha1 sha1module.c
-#_sha256 sha256module.c
-#_sha512 sha512module.c
-#_sha3 _sha3/sha3module.c
-
-# _blake module
-#_blake2 _blake2/blake2module.c _blake2/blake2b_impl.c _blake2/blake2s_impl.c
-
-# The _tkinter module.
-#
-# The command for _tkinter is long and site specific.  Please
-# uncomment and/or edit those parts as indicated.  If you don't have a
-# specific extension (e.g. Tix or BLT), leave the corresponding line
-# commented out.  (Leave the trailing backslashes in!  If you
-# experience strange errors, you may want to join all uncommented
-# lines and remove the backslashes -- the backslash interpretation is
-# done by the shell's "read" command and it may not be implemented on
-# every system.
-
-# *** Always uncomment this (leave the leading underscore in!):
-# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \
-# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:
-#	-L/usr/local/lib \
-# *** Uncomment and edit to reflect where your Tcl/Tk headers are:
-#	-I/usr/local/include \
-# *** Uncomment and edit to reflect where your X11 header files are:
-#	-I/usr/X11R6/include \
-# *** Or uncomment this for Solaris:
-#	-I/usr/openwin/include \
-# *** Uncomment and edit for Tix extension only:
-#	-DWITH_TIX -ltix8.1.8.2 \
-# *** Uncomment and edit for BLT extension only:
-#	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \
-# *** Uncomment and edit for PIL (TkImaging) extension only:
-#     (See http://www.pythonware.com/products/pil/ for more info)
-#	-DWITH_PIL -I../Extensions/Imaging/libImaging  tkImaging.c \
-# *** Uncomment and edit for TOGL extension only:
-#	-DWITH_TOGL togl.c \
-# *** Uncomment and edit to reflect your Tcl/Tk versions:
-#	-ltk8.2 -ltcl8.2 \
-# *** Uncomment and edit to reflect where your X11 libraries are:
-#	-L/usr/X11R6/lib \
-# *** Or uncomment this for Solaris:
-#	-L/usr/openwin/lib \
-# *** Uncomment these for TOGL extension only:
-#	-lGL -lGLU -lXext -lXmu \
-# *** Uncomment for AIX:
-#	-lld \
-# *** Always uncomment this; X11 libraries to link with:
-#	-lX11
-
-# Lance Ellinghaus's syslog module
-#syslog syslogmodule.c		# syslog daemon interface
-
-
-# Curses support, requiring the System V version of curses, often
-# provided by the ncurses library.  e.g. on Linux, link with -lncurses
-# instead of -lcurses).
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#_curses _cursesmodule.c -lcurses -ltermcap
-# Wrapper for the panel library that's part of ncurses and SYSV curses.
-#_curses_panel _curses_panel.c -lpanel -lncurses
-
-
-# Modules that provide persistent dictionary-like semantics.  You will
-# probably want to arrange for at least one of them to be available on
-# your machine, though none are defined by default because of library
-# dependencies.  The Python module dbm/__init__.py provides an
-# implementation independent wrapper for these; dbm/dumb.py provides
-# similar functionality (but slower of course) implemented in Python.
-
-# The standard Unix dbm module has been moved to Setup.config so that
-# it will be compiled as a shared library by default.  Compiling it as
-# a built-in module causes conflicts with the pybsddb3 module since it
-# creates a static dependency on an out-of-date version of db.so.
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#_dbm _dbmmodule.c 	# dbm(3) may require -lndbm or similar
-
-# Anthony Baxter's gdbm module.  GNU dbm(3) will require -lgdbm:
-#
-# First, look at Setup.config; configure may have set this for you.
-
-#_gdbm _gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm
-
-
-# Helper module for various ascii-encoders
-#binascii binascii.c
-
-# Fred Drake's interface to the Python parser
-#parser parsermodule.c
-
-
-# Lee Busby's SIGFPE modules.
-# The library to link fpectl with is platform specific.
-# Choose *one* of the options below for fpectl:
-
-# For SGI IRIX (tested on 5.3):
-#fpectl fpectlmodule.c -lfpe
-
-# For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):
-# (Without the compiler you don't have -lsunmath.)
-#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm
-
-# For other systems: see instructions in fpectlmodule.c.
-#fpectl fpectlmodule.c ...
-
-# Test module for fpectl.  No extra libraries needed.
-#fpetest fpetestmodule.c
-
-# Andrew Kuchling's zlib module.
-# This require zlib 1.1.3 (or later).
-# See http://www.gzip.org/zlib/
-zlib zlibmodule.c -I$(SYSROOT)/include -L$(SYSROOT)/lib -lz
-
-# Interface to the Expat XML parser
-#
-# Expat was written by James Clark and is now maintained by a group of
-# developers on SourceForge; see www.libexpat.org for more
-# information.  The pyexpat module was written by Paul Prescod after a
-# prototype by Jack Jansen.  Source of Expat 1.95.2 is included in
-# Modules/expat/.  Usage of a system shared libexpat.so/expat.dll is
-# not advised.
-#
-# More information on Expat can be found at www.libexpat.org.
-#
-#pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
-
-# Hye-Shik Chang's CJKCodecs
-
-# multibytecodec is required for all the other CJK codec modules
-#_multibytecodec cjkcodecs/multibytecodec.c
-
-#_codecs_cn cjkcodecs/_codecs_cn.c
-#_codecs_hk cjkcodecs/_codecs_hk.c
-#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c
-#_codecs_jp cjkcodecs/_codecs_jp.c
-#_codecs_kr cjkcodecs/_codecs_kr.c
-#_codecs_tw cjkcodecs/_codecs_tw.c
-
-# Example -- included for reference only:
-# xx xxmodule.c
-
-# Another example -- the 'xxsubtype' module shows C-level subtyping in action
-xxsubtype xxsubtype.c

package/python3.6.2/lib/python3.6/config-3.6m-arm-linux-androideabi/Setup.config

@@ -1,10 +0,0 @@
-# This file is transmogrified into Setup.config by config.status.
-
-# The purpose of this file is to conditionally enable certain modules
-# based on configure-time options.
-
-# Threading
-_thread _threadmodule.c
-
-# The rest of the modules previously listed in this file are built
-# by the setup.py script in Python 2.1 and later.

package/python3.6.2/lib/python3.6/config-3.6m-arm-linux-androideabi/Setup.local

@@ -1 +0,0 @@
-# Edit this file for local setup changes

package/python3.6.2/lib/python3.6/config-3.6m-arm-linux-androideabi/config.c

@@ -1,114 +0,0 @@
-/* Generated automatically from ./Modules/config.c.in by makesetup. */
-/* -*- C -*- ***********************************************
-Copyright (c) 2000, BeOpen.com.
-Copyright (c) 1995-2000, Corporation for National Research Initiatives.
-Copyright (c) 1990-1995, Stichting Mathematisch Centrum.
-All rights reserved.
-
-See the file "Misc/COPYRIGHT" for information on usage and
-redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-******************************************************************/
-
-/* Module configuration */
-
-/* !!! !!! !!! This file is edited by the makesetup script !!! !!! !!! */
-
-/* This file contains the table of built-in modules.
-   See create_builtin() in import.c. */
-
-#include "Python.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-extern PyObject* PyInit__thread(void);
-extern PyObject* PyInit_posix(void);
-extern PyObject* PyInit_errno(void);
-extern PyObject* PyInit_pwd(void);
-extern PyObject* PyInit__sre(void);
-extern PyObject* PyInit__codecs(void);
-extern PyObject* PyInit__weakref(void);
-extern PyObject* PyInit__functools(void);
-extern PyObject* PyInit__operator(void);
-extern PyObject* PyInit__collections(void);
-extern PyObject* PyInit_itertools(void);
-extern PyObject* PyInit_atexit(void);
-extern PyObject* PyInit__signal(void);
-extern PyObject* PyInit__stat(void);
-extern PyObject* PyInit_time(void);
-extern PyObject* PyInit__io(void);
-extern PyObject* PyInit_zipimport(void);
-extern PyObject* PyInit_faulthandler(void);
-extern PyObject* PyInit__tracemalloc(void);
-extern PyObject* PyInit__symtable(void);
-extern PyObject* PyInit_zlib(void);
-extern PyObject* PyInit_xxsubtype(void);
-
-/* -- ADDMODULE MARKER 1 -- */
-
-extern PyObject* PyMarshal_Init(void);
-extern PyObject* PyInit_imp(void);
-extern PyObject* PyInit_gc(void);
-extern PyObject* PyInit__ast(void);
-extern PyObject* _PyWarnings_Init(void);
-extern PyObject* PyInit__string(void);
-
-struct _inittab _PyImport_Inittab[] = {
-
-    {"_thread", PyInit__thread},
-    {"posix", PyInit_posix},
-    {"errno", PyInit_errno},
-    {"pwd", PyInit_pwd},
-    {"_sre", PyInit__sre},
-    {"_codecs", PyInit__codecs},
-    {"_weakref", PyInit__weakref},
-    {"_functools", PyInit__functools},
-    {"_operator", PyInit__operator},
-    {"_collections", PyInit__collections},
-    {"itertools", PyInit_itertools},
-    {"atexit", PyInit_atexit},
-    {"_signal", PyInit__signal},
-    {"_stat", PyInit__stat},
-    {"time", PyInit_time},
-    {"_io", PyInit__io},
-    {"zipimport", PyInit_zipimport},
-    {"faulthandler", PyInit_faulthandler},
-    {"_tracemalloc", PyInit__tracemalloc},
-    {"_symtable", PyInit__symtable},
-    {"zlib", PyInit_zlib},
-    {"xxsubtype", PyInit_xxsubtype},
-
-/* -- ADDMODULE MARKER 2 -- */
-
-    /* This module lives in marshal.c */
-    {"marshal", PyMarshal_Init},
-
-    /* This lives in import.c */
-    {"_imp", PyInit_imp},
-
-    /* This lives in Python/Python-ast.c */
-    {"_ast", PyInit__ast},
-
-    /* These entries are here for sys.builtin_module_names */
-    {"builtins", NULL},
-    {"sys", NULL},
-
-    /* This lives in gcmodule.c */
-    {"gc", PyInit_gc},
-
-    /* This lives in _warnings.c */
-    {"_warnings", _PyWarnings_Init},
-
-    /* This lives in Objects/unicodeobject.c */
-    {"_string", PyInit__string},
-
-    /* Sentinel */
-    {0, 0}
-};
-
-
-#ifdef __cplusplus
-}
-#endif

package/python3.6.2/lib/python3.6/config-3.6m-arm-linux-androideabi/config.c.in

@@ -1,67 +0,0 @@
-/* -*- C -*- ***********************************************
-Copyright (c) 2000, BeOpen.com.
-Copyright (c) 1995-2000, Corporation for National Research Initiatives.
-Copyright (c) 1990-1995, Stichting Mathematisch Centrum.
-All rights reserved.
-
-See the file "Misc/COPYRIGHT" for information on usage and
-redistribution of this file, and for a DISCLAIMER OF ALL WARRANTIES.
-******************************************************************/
-
-/* Module configuration */
-
-/* !!! !!! !!! This file is edited by the makesetup script !!! !!! !!! */
-
-/* This file contains the table of built-in modules.
-   See create_builtin() in import.c. */
-
-#include "Python.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-/* -- ADDMODULE MARKER 1 -- */
-
-extern PyObject* PyMarshal_Init(void);
-extern PyObject* PyInit_imp(void);
-extern PyObject* PyInit_gc(void);
-extern PyObject* PyInit__ast(void);
-extern PyObject* _PyWarnings_Init(void);
-extern PyObject* PyInit__string(void);
-
-struct _inittab _PyImport_Inittab[] = {
-
-/* -- ADDMODULE MARKER 2 -- */
-
-    /* This module lives in marshal.c */
-    {"marshal", PyMarshal_Init},
-
-    /* This lives in import.c */
-    {"_imp", PyInit_imp},
-
-    /* This lives in Python/Python-ast.c */
-    {"_ast", PyInit__ast},
-
-    /* These entries are here for sys.builtin_module_names */
-    {"builtins", NULL},
-    {"sys", NULL},
-
-    /* This lives in gcmodule.c */
-    {"gc", PyInit_gc},
-
-    /* This lives in _warnings.c */
-    {"_warnings", _PyWarnings_Init},
-
-    /* This lives in Objects/unicodeobject.c */
-    {"_string", PyInit__string},
-
-    /* Sentinel */
-    {0, 0}
-};
-
-
-#ifdef __cplusplus
-}
-#endif