@zwave-js/config 15.6.0 → 15.7.0

package/config/devices/0x0063/64637_zw7105.json

@@ -38,7 +38,7 @@
 	"metadata": {
 		"inclusion": "Adding your device to a Z-Wave network\n1. Follow the instructions for your Z-Wave certified controller to add the LED smart bulb to\nthe Z-Wave network.\n2. Once the controller is ready to add your LED smart bulb, turn on power to the socket. The\nLED smart bulb is automatically added into your network within 30 seconds, and the smart\nbulb flashes twice when added to the network.\n3. You have complete control to turn ON/OFF your lamp or set dim levels according to\ngroups, scenes, schedules and interactive automations programmed by your controller.\nIf your Z-Wave certified controller features remote access, you can control your lighting\nfrom your mobile devices",
 		"exclusion": "To remove and reset the device\n1. Start with the bulb powered off at the wall switch.\n2. Follow the instructions for your Z-Wave certified controller to remove the smart bulb from the\nZ-Wave network.\n3. Once the controller is ready to remove your smart bulb, turn ON the light switch. The smart bulb will\nflash twice when removed from the network",
-		"reset": "To return your smart bulb to factory defaults\nStarting with the bulb on, cycle the wall switch OFF/ON four times.\n1. Turn OFF the switch, pause one second and turn ON again.\n2. Repeat three times (four times total).\n3. The smart bulb flashes twice when reset.\nNOTE: This should only be used in the event your network’s primary\ncontroller is missing or otherwise inoperable",
+		"reset": "To return your smart bulb to factory defaults\nStarting with the bulb on, cycle the wall switch OFF/ON four times.\n1. Turn OFF the switch, pause one second and turn ON again.\n2. Repeat three times (four times total).\n3. The smart bulb flashes twice when reset.\nNOTE: This should only be used in the event your network's primary\ncontroller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4255/64637%20QSG.pdf"
 	}
 }

package/config/devices/0x0068/gateway_fg2200.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "The Android APP application, please see manual 5.1.4&4.1.5\n\nClick “Reset”, show “Are you sure to reset Z-Dongle?”and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default.\n\nAnd manual P.10\nThe gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset.\n\nmanual P.22\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "The Android APP application, please see manual 5.1.4&4.1.5\n\nClick 'Reset', show 'Are you sure to reset Z-Dongle?'and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default.\n\nAnd manual P.10\nThe gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset.\n\nmanual P.22\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2633/FG3200%20Z-Wave%20plus%20User%20manual_20170929.pdf"
 	}
 }

package/config/devices/0x0068/gateway_fg3200.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "The Android APP application, please see manual 5.1.4&4.1.5\n\nClick “Reset”, show “Are you sure to reset Z-Dongle?”and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default.\n\nAnd manual P.10\nThe gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset.\n\nmanual P.22\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "The Android APP application, please see manual 5.1.4&4.1.5\n\nClick 'Reset', show 'Are you sure to reset Z-Dongle?'and click OK to reset the Z-Wave network,or FG3200/FG2200 Reset button 10 seconds after the reset to reset the factory default.\n\nAnd manual P.10\nThe gateway will send DEVICE_RESET_LOCALLY_NOTIFICATION to associated Z-Wave devices when it is reset or factory-reset.\n\nmanual P.22\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2806/FG3200%20Z-Wave%20plus%20User%20manual_20170929.pdf"
 	}
 }

package/config/devices/0x007f/n-r0009.json

@@ -15,7 +15,6 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "n/a",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1321/PKG0843%20-%20650-020287%20003%20Harmony%20Home%20Hub%20Extender%20Base%20Inside%20CAN%2015%20-%20215.pdf"
 	}
 }

package/config/devices/0x0086/dsb09.json

@@ -277,7 +277,7 @@
 		"preserveRootApplicationCCValueIDs": true
 	},
 	"metadata": {
-		"inclusion": "1. Put your primary Z-Wave controller into inclusion mode.\n2. Press the Action Button on your HEM. If it has been successfully linked to your network, its LED will remain illuminated. If the linking was unsuccessful, your HEM’s LED will continue to blink.",
+		"inclusion": "1. Put your primary Z-Wave controller into inclusion mode.\n2. Press the Action Button on your HEM. If it has been successfully linked to your network, its LED will remain illuminated. If the linking was unsuccessful, your HEM's LED will continue to blink.",
 		"exclusion": "1. Put your primary Z-Wave controller into exclusion mode.\n2. Press the Action Button on your HEM. If it has been successfully removed from your network, its LED will blink. If the removal was unsuccessful, its LED will be solid and it will be then repeated again.",
 		"reset": "1. Press and hold the Action Button for 10 seconds.\n2. If successful, the LED on the HEM should begin to blink slowly.",
 		"manual": "https://fccid.io/XBADSB09104/User-Manual/User-manual-1279688.pdf"

package/config/devices/0x0086/dsb29.json

@@ -68,7 +68,7 @@
 	],
 	"metadata": {
 		"wakeup": "Press the Z-Wave button on your sensor's main unit. Your sensor will now remain awake for 10 minutes.",
-		"inclusion": "1.Remove the spacing tab to connect the batteries. Its LED will blink for 3 seconds.\n2.Press the Include button on your primary Z-Wave controller/gateway.\n3. Press the Z-Wave button on your sensor. If it has been successfully added to your Z-Wave network, its LED will illuminate for 10 minutes. During this period your primary Z-Wave controller/gateway is able to configure your sensor.\n4.Your sensor will then automatically exit setup mode at the end of 10 minutes. To exit it sooner you can quickly click your sensor’s tamper switch 3 times.",
+		"inclusion": "1.Remove the spacing tab to connect the batteries. Its LED will blink for 3 seconds.\n2.Press the Include button on your primary Z-Wave controller/gateway.\n3. Press the Z-Wave button on your sensor. If it has been successfully added to your Z-Wave network, its LED will illuminate for 10 minutes. During this period your primary Z-Wave controller/gateway is able to configure your sensor.\n4.Your sensor will then automatically exit setup mode at the end of 10 minutes. To exit it sooner you can quickly click your sensor's tamper switch 3 times.",
 		"exclusion": "1.Press the Exclude button on your primary Z-Wave controller/gateway.\n2. Press the Z-Wave button on your sensor. If it has been successfully removed from your Z-Wave network, its LED will blink for 3 seconds. If the removal was unseccessful the light will be solid after pressing your sensor's Z-Wave button.",
 		"reset": "1. Press and hold your sensor's Z-Wave button for 20 seconds.\n2. Your Door/Window Sensor will reset to its factory default configuration. Its LED will blink for 3 seconds to let you know the reset was successful.",
 		"manual": "https://fccid.io/XBADSB29/User-Manual/User-Manual-1977568.pdf"

package/config/devices/0x0086/zw056.json

@@ -202,8 +202,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1307/Doorbell%20manual(20150604).pdf"
 	}

package/config/devices/0x0086/zw062.json

@@ -314,8 +314,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find on the product's housing",
 		"reset": "Press and hold the Z-Wave button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1445/Aeon%20Labs%20Garage%20Door%20Controller%20Gen5%20manual.pdf"
 	}

package/config/devices/0x0086/zw074.json

@@ -171,8 +171,8 @@
 		"forceNotificationIdleReset": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button that you can find in back of the product",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
 		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1163/Instructions%20-%20MultiSensor%20Gen5%20MCert1.pdf"
 	}

package/config/devices/0x0086/zw075.json

@@ -168,8 +168,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1056/Aeon%20Labs%20Smart%20Switch%20Gen5_Update%202.pdf"
 	}

package/config/devices/0x0086/zw078.json

@@ -151,8 +151,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button",
 		"reset": "Press and hold the Z-Wave button for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/998/Engineering%20Spec%20-%20Aeon%20Labs%20Heavy%20Duty%20Smart%20Switch%20Gen5.pdf"
 	}

package/config/devices/0x0086/zw080.json

@@ -80,8 +80,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1141/Siren%20Gen5%20Manual.pdf"
 	}

package/config/devices/0x0086/zw088.json

@@ -43,7 +43,7 @@
 		}
 	],
 	"metadata": {
-		"reset": "Use this procedure only in the event that the primary controller is missing or otherwise inoperable.\n\nPress and hold the “Mode” button and “Learn” button for 20 seconds and then release",
+		"reset": "Press and hold the 'Mode' button and 'Learn' button for 20 seconds and then release",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1165/Instructions%20-%20Aeon%20Labs%20Key%20Fob%20Gen5%20MCert.pdf"
 	}
 }

package/config/devices/0x0086/zw089.json

@@ -70,8 +70,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button that you can find in back of the product",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
 		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1179/Recessed%20Door%20Sensor%20Gen5%20-%20Manual%20MCert.pdf"
 	}

package/config/devices/0x0086/zw095.json

@@ -444,8 +444,8 @@
 		"preserveRootApplicationCCValueIDs": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 10 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2046/Home%20Energy%20Meter%20Gen5%20manual.pdf"
 	}

package/config/devices/0x0086/zw096.json

@@ -180,8 +180,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3119/Instructions%20-%20Aeon%20Labs%20Smart%20Switch%206%20(2).pdf"
 	}

package/config/devices/0x0086/zw097.json

@@ -64,8 +64,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action Button that you can find in back of the product",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
 		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1495/Dry%20Contact%20Sensor%20Gen5%20manual.pdf"
 	}

package/config/devices/0x0086/zw099.json

@@ -183,8 +183,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2246/Aeon%20Labs%20Smart%20Dimmer%206%20manual.pdf"
 	}

package/config/devices/0x0086/zw100.json

@@ -572,8 +572,8 @@
 		"reportTimeout": 2000
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Z-Wave button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Z-Wave button that you can find in back of the product",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Z-Wave button that you can find in the back of the product",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Z-Wave button that you can find in back of the product",
 		"reset": "Press and hold the Z-Wave button that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1390/Aeon%20Labs%20MultiSensor%206%20manual.pdf"
 	}

package/config/devices/0x0086/zw111.json

@@ -492,8 +492,8 @@
 		"treatMultilevelSwitchSetAsEvent": true
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2149/Aeon%20Labs%20Nano%20Dimmer%20manual.pdf"
 	}

package/config/devices/0x0086/zw112.json

@@ -87,8 +87,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action Button that you can find in back of the product",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
 		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1611/Door%20Window%20Sensor%206%20manual.pdf"
 	}

package/config/devices/0x0086/zw116.json

@@ -440,8 +440,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2208/Nano%20Switch%20manual.pdf"
 	}

package/config/devices/0x0086/zw120.json

@@ -84,8 +84,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action Button that you can find in the back of the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action Button that you can find in back of the product",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find in the back of the product",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find in back of the product",
 		"reset": "Press the Action Button once that you can find in back of the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1574/Door%20Window%20Sensor%20Gen5%20manual.pdf"
 	}

package/config/devices/0x0086/zw122.json

@@ -390,8 +390,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action Button that you can find on the product",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action Button that you can find on the product",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action Button that you can find on the product",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action Button that you can find on the product",
 		"reset": "Press and hold the Action Button that you can find on the product for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2407/Aeon%20Labs%20Water%20Sensor%206%20manual.pdf"
 	}

package/config/devices/0x0086/zw130.json

@@ -132,8 +132,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3264/Aeon%20Labs%20WallMote%20Quad%20manual.pdf"
 	}

package/config/devices/0x0086/zw132.json

@@ -513,8 +513,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2136/Dual%20Nano%20Switch%20manual.pdf"
 	}

package/config/devices/0x0086/zw139.json

@@ -304,8 +304,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2306/Nano%20Switch%20manual.pdf"
 	}

package/config/devices/0x0086/zw140.json

@@ -304,8 +304,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product’s Action button that you can find on the product's housing",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, short press the product's Action button that you can find on the product's housing",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2247/Dual%20Nano%20Switch%20manual.pdf"
 	}

package/config/devices/0x0086/zw141.json

@@ -110,8 +110,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product’s Action button that you can find on the product's housing.\n\nIf the Nano Dimmer has been successfully added to your Z-Wave network, its RGB LED will be solid. If unsuccessful, the red LED will be on for 2 seconds and then remain a colorful gradient, repeat the instructions above from step 1.",
-		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, quick press the product’s Action button 6 times that you can find on the product's housing or toggle the external manual switch 2 times in fast succession.\n\nIf the Nano Dimmer has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load), repeat the instructions above from step 1",
+		"inclusion": "Turn the primary controller of Z-Wave network into inclusion mode, short press the product's Action button that you can find on the product's housing.\n\nIf the Nano Dimmer has been successfully added to your Z-Wave network, its RGB LED will be solid. If unsuccessful, the red LED will be on for 2 seconds and then remain a colorful gradient, repeat the instructions above from step 1.",
+		"exclusion": "Turn the primary controller of Z-Wave network into exclusion mode, quick press the product's Action button 6 times that you can find on the product's housing or toggle the external manual switch 2 times in fast succession.\n\nIf the Nano Dimmer has been successfully removed from your Z-Wave network, its RGB LED will remain colorful gradient. If the removal was unsuccessful, the RGB LED will still be solid (following the state of the output load), repeat the instructions above from step 1",
 		"reset": "Press and hold the Action button that you can find on the product's housing for 20 seconds and then release. This procedure should only be used when the primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3269/Aeon%20Labs%20Nano%20Shutter%20-manual%20-%202.pdf"
 	}

package/config/devices/0x008b/acont824as52db.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "From the HOME Screen, press MENU, NEXIA, ADVANCED, then FACTORY RESET.\n\nResets all Z-Wave information and removes all devices from the bridge. If this bridge is the primary controller for your network, resetting it will result in all the devices in your network being removed. Following the reset, it will be necessary to remove and then add all of the devices back to your network.\n\nIf this bridge is being used as a secondary or inclusion controller in the network, please reset this bridge only in the event that the primary controller is missing or otherwise inoperable",
+		"reset": "From the HOME Screen, press MENU, NEXIA, ADVANCED, then FACTORY RESET.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2991/012-5060-05_8245_American%20Standard%20User%20Guide.pdf"
 	}
 }

package/config/devices/0x008b/acont850ac52ub.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "From the HOME Screen, press MENU, NEXIA, ADVANCED, then FACTORY RESET.\n\nResets all Z-Wave information and removes all devices from the bridge. If this bridge is the primary controller for your network, resetting it will result in all the devices in your network being removed. Following the reset, it will be necessary to remove and then add all of the devices back to your network.\n\nIf this bridge is being used as a secondary or inclusion controller in the network, please reset this bridge only in the event that the primary controller is missing or otherwise inoperable",
+		"reset": "From the HOME Screen, press MENU, NEXIA, ADVANCED, then FACTORY RESET.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3005/012-5061-05_am%20std.pdf"
 	}
 }

package/config/devices/0x008b/azon1050ac52za.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "From the HOME Screen, press MENU on the control, then press NEXIA.\n\nPress ADVANCED, then FACTORY RESET.\n\nIf this bridge is being used as a secondary or inclusion controller in the network, please reset this bridge only in the event that the primary controller is missing or otherwise inoperable",
+		"reset": "1. From the HOME Screen, press MENU on the control.\n2. Press NEXIA.\n3. Press ADVANCED.\n4. Press FACTORY RESET.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2056/AmStd_12-5062-01_final.pdf"
 	}
 }

package/config/devices/0x008b/tzon1050ac52za.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "From the HOME Screen, press MENU on the control, then press NEXIA.\n\nPress ADVANCED, then FACTORY RESET.\n\nIf this bridge is being used as a secondary or inclusion controller in the network, please reset this bridge only in the event that the primary controller is missing or otherwise inoperable",
+		"reset": "1. From the HOME Screen, press MENU on the control.\n2. Press NEXIA.\n3. Press ADVANCED.\n4. Press FACTORY RESET.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1993/32-5093-01.pdf"
 	}
 }

package/config/devices/0x008b/xl850.json

@@ -20,7 +20,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "From the HOME Screen, press MENU, NEXIA, ADVANCED, then FACTORY RESET.\n\nResets all Z-Wave information and removes all devices from the bridge. If this bridge is the primary controller for your network, resetting it will result in all the devices in your network being removed. Following the reset, it will be necessary to remove and then add all of the devices back to your network.\n\nIf this bridge is being used as a secondary or inclusion controller in the network, please reset this bridge only in the event that the primary controller is missing or otherwise inoperable",
+		"reset": "From the HOME Screen, press MENU, NEXIA, ADVANCED, then FACTORY RESET.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3004/032-5091-05_trane.pdf"
 	}
 }

package/config/devices/0x008c/na930.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Please use this procedure only in the event that the system primary controller is missing or otherwise inoperable.\n\nTo reset the controller, press the reset button for 20 seconds. This will reset it to factory default.",
+		"reset": "Press the reset button for 20 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1643/NA930OtherZ-WaveDeviceWizard.pdf"
 	}
 }

package/config/devices/0x008c/na930fr.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Access the UI by logging into the home live portal (http://id-rec.orange.fr/auth_user/bin/auth0user.cgi).\n\nClick on the Settings Tab on the left side of the screen\nClick on the backup tab and then on the \"Reset to Default\" button",
+		"reset": "1. Access the UI by logging into the home live portal.\n2. Click on the Settings Tab on the left side of the screen.\n3. Click on the backup tab and then on the \"Reset to Default\" button.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/1168/Unit-Static-Cling_Gen1_2x2_rF.pdf"
 	}
 }

package/config/devices/0x008c/nhub100.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo reset the controller, press the reset button for 20 seconds. This will reset it to factory default.",
+		"reset": "Press the reset button for 20 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2280/NHUB100_QSG_Z-Wave_Overwiew.pdf"
 	}
 }

package/config/devices/0x008c/nhub200.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo reset the controller, press the reset button for 6 times in 6 seconds. This will reset it to factory default",
+		"reset": "Press the reset button 6 times in 6 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2281/NHUB200_QSG_Z-Wave_Overview.pdf"
 	}
 }

package/config/devices/0x008c/trf-zw2.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo reset the controller, press the reset button for 20 seconds. This will reset it to factory default.",
+		"reset": "Press the reset button for 20 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2287/TRF-ZW2_Z-Wave_Overview_Owners_Manual.pdf"
 	}
 }

package/config/devices/0x008c/veraedge.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo reset the controller, press the reset button for 20 seconds. This will reset it to factory default.",
+		"reset": "Press the reset button for 20 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3198/Z-Wave_Overview%20and_QSG_VeraEdge.pdf"
 	}
 }

package/config/devices/0x008c/veraplus.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\nReset to Network defaults - Press the Reset button 3 times in 6 seconds.\nFactory Reset - Press the Reset button 6 times in 6 seconds. The Controller will reboot",
+		"reset": "Reset to Network defaults: Press the Reset button 3 times in 6 seconds.\n\nFactory Reset: Press the Reset button 6 times in 6 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3199/QSG_Z-WAVE_OVERVIEW_VeraPlus.pdf"
 	}
 }

package/config/devices/0x008c/verasecure.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\nReset to Network defaults - Press the Reset button 3 times in 6 seconds.\nTo reset the controller, press the Reset button 6 times in 6 seconds. This will reset it to factory default",
+		"reset": "Reset to Network defaults: Press the Reset button 3 times in 6 seconds.\n\nFactory Reset: Press the Reset button 6 times in 6 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3197/QSG_Z-Wave_Overview_VeraSecure.pdf"
 	}
 }

package/config/devices/0x008c/ze250.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo reset the controller, press the reset button for 6 times in 6 seconds. This will reset it to factory default.",
+		"reset": "Press the reset button 6 times in 6 seconds.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2316/Cybertan_ZE250_QSG_Z-Wave_Overview.pdf"
 	}
 }

package/config/devices/0x0090/8225.json

@@ -172,8 +172,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button “A” on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system’s instructions to remove the lock from the network. When prompted by the system, press button A” on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
+		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
 		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3353/Baldwin_8225_Product_Manual_5_9.pdf"
 	}

package/config/devices/0x0090/8252.json

@@ -172,8 +172,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button “A” on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system’s instructions to remove the lock from the network. When prompted by the system, press button A” on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
+		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
 		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3070/Install_Guide_8285_9_5_2018.pdf"
 	}

package/config/devices/0x0090/910.json

@@ -235,8 +235,8 @@
 		]
 	},
 	"metadata": {
-		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button “A” on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
-		"exclusion": "Follow your smart home system’s instructions to remove the lock from the network. When prompted by the system, press button A” on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
+		"inclusion": "Initiate the process to add the lock to your system at your smart home controller.\nWhen prompted by your smart home system to add the lock, press button 'A' on the lock interior one time. The red LED will illuminate when the lock enters Add Mode.\nPlease allow time for the controller to add the lock to your system",
+		"exclusion": "Follow your smart home system's instructions to remove the lock from the network. When prompted by the system, press button A' on the lock interior once. The red LED will illuminate when the lock enters Remove mode.",
 		"reset": "A factory reset will delete all user codes associated with the lock and will remove itself from your smart home system.\nPlease only perform a factory reset when the primary controller is missing or inoperable.\n\nTo perform a factory reset, please perform the following: \n1. Remove the battery pack\n2. Press and HOLD the Program button while reinserting the battery pack.\n3. Keep holding the button for 30 seconds until the lock beeps and the status LED flashes red.\n4. Press the Program button once more. The status LED will flash green and red several times.\n5. After a few seconds, the lock will initiate the door handing process",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2239/Install_Guide_910_02_27_2017.pdf"
 	}