@zwave-js/config 15.6.0 → 15.7.0

package/config/devices/0x0371/zwa046_3phase_eu.json

@@ -21,7 +21,7 @@
 	"metadata": {
 		"inclusion": "1. Turn your gateway/ main controller into adding mode.\n2. Press once the Action Button on the product",
 		"exclusion": "1. Turn your gateway/ main controller into removing mode.\n2. Press once the Action Button on the product",
-		"reset": "Press and hold the Action Button on product for 10s.\n\nNote: Please use this procedure only when the network’s primary controller is missing or otherwise inoperable."
+		"reset": "Press and hold the Action Button on product for 10s.\n\nNote: Please use this procedure only when the network's primary controller is missing or otherwise inoperable."
 	},
 	"associations": {
 		"1": {

package/config/devices/0x0377/wsr_1706_v_1_0.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"reset": "Factory resets the Z-Wave controller.\n1. Open gateway settings in your Web App and press “Reset” (Z-Wave Settings)\n2. Confirm the dialog. This will perform a factory reset and remove every Z-Wave device from your Gateway (you have to repair them again).\nNote: If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Factory resets the Z-Wave controller.\n1. Open gateway settings in your Web App and press 'Reset' (Z-Wave Settings)\n2. Confirm the dialog. This will perform a factory reset and remove every Z-Wave device from your Gateway (you have to repair them again).\nNote: If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2786/Hornbach%20User%20Manual%20v2.6.pdf"
 	}
 }

package/config/devices/0x037b/gkbc-3100z.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Please proceed with the door lock open.\n1. Set the controller in inclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [8][8] button after pressing the [*] button.",
-		"exclusion": "Please proceed with the door lock open.\n1. Set the controller in exclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [9][9] button after pressing the [*] button",
-		"reset": "Please proceed with the door lock open.\nPlease use this procedure only when the primary controller is missing or otherwise inoperable.\n\n1. Open the battery cover of the indoor body and press the [REG] button.\n2. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n3. Press the [5] button after pressing the [*] button.\n4. Press the [2] button after pressing the [*] button.\n5. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button\n\n*Master pins can change user settings.",
+		"inclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [8][8].",
+		"exclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [9][9].",
+		"reset": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [5].\n4. Press the [*] button, then press [2].\n5. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3803/GKBC-3100Z_Z-Wave%20Manual_20200226.pdf"
 	}
 }

package/config/devices/0x037b/gkdl-5000z.json

@@ -65,9 +65,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Please proceed with the door lock open.\n1. Set the controller in inclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [8][8] button after pressing the [*] button.",
-		"exclusion": "Please proceed with the door lock open.\n1. Set the controller in exclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [9][9] button after pressing the [*] button",
-		"reset": "Please proceed with the door lock open.\nPlease use this procedure only when the primary controller is missing or otherwise inoperable.\n\n1. Open the battery cover of the indoor body and press the [REG] button.\n2. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n3. Press the [5] button after pressing the [*] button.\n4. Press the [2] button after pressing the [*] button.\n5. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button\n\n*Master pins can change user settings.",
+		"inclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [8][8].",
+		"exclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [9][9].",
+		"reset": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [5].\n4. Press the [*] button, then press [2].\n5. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3991/GKDL-5000Z_5100Z_Z-Wave%20Manual_20200826.pdf"
 	}
 }

package/config/devices/0x037b/gkdl-5100z.json

@@ -70,9 +70,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Please proceed with the door lock open.\n1. Set the controller in inclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [8][8] button after pressing the [*] button.",
-		"exclusion": "Please proceed with the door lock open.\n1. Set the controller in exclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [9][9] button after pressing the [*] button",
-		"reset": "Please proceed with the door lock open.\nPlease use this procedure only when the primary controller is missing or otherwise inoperable.\n\n1. Open the battery cover of the indoor body and press the [REG] button.\n2. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n3. Press the [5] button after pressing the [*] button.\n4. Press the [2] button after pressing the [*] button.\n5. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button\n\n*Master pins can change user settings.",
+		"inclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [8][8].",
+		"exclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [9][9].",
+		"reset": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [5].\n4. Press the [*] button, then press [2].\n5. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3952/GKDL-5100Z_Z-Wave%20Manual_20200808.pdf"
 	}
 }

package/config/devices/0x037b/gkw-1000z.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Please proceed with the door lock open.\n1. Set the controller in inclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [8][8] button after pressing the [*] button.",
-		"exclusion": "Please proceed with the door lock open.\n1. Set the controller in exclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [9][9] button after pressing the [*] button",
-		"reset": "Please proceed with the door lock open.\nPlease use this procedure only when the primary controller is missing or otherwise inoperable.\n\n1. Open the battery cover of the indoor body and press the [REG] button.\n2. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n3. Press the [5] button after pressing the [*] button.\n4. Press the [5] button after pressing the [*] button.\n5. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button\n\n*Master pins can change user settings.",
+		"inclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [8][8].",
+		"exclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [9][9].",
+		"reset": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [5].\n4. Press the [*] button, then press [5].\n5. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3191/GKW-1000Z%20Z-Wave%20Manual_English_201801211.pdf"
 	}
 }

package/config/devices/0x037b/gkw-2000.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "Please proceed with the door lock open.\n1. Set the controller in inclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [8][8] button after pressing the [*] button.",
-		"exclusion": "Please proceed with the door lock open.\n1. Set the controller in exclusion mode.\n2. Open the battery cover of the indoor body and press the [REG] button.\n3. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n4. Press the [9][9] button after pressing the [*] button",
-		"reset": "Please proceed with the door lock open.\nPlease use this procedure only when the primary controller is missing or otherwise inoperable.\n\n1. Open the battery cover of the indoor body and press the [REG] button.\n2. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button.\n3. Press the [5] button after pressing the [*] button.\n4. Press the [2] button after pressing the [*] button.\n5. Press the Master Pin [1][2][3][4] (Default value) button after pressing the [#] button\n\n*Master pins can change user settings.",
+		"inclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [8][8].",
+		"exclusion": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [9][9].",
+		"reset": "Ensure the door lock is open.\n1. Open the battery cover of the indoor unit and press the [REG] button.\n2. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).\n3. Press the [*] button, then press [5].\n4. Press the [*] button, then press [2].\n5. Press the [#] button, then enter the Master PIN: [1][2][3][4] (default value).",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3064/GKW-2000D%20Z-Wave%20Manual_20180807.pdf"
 	}
 }

package/config/devices/0x0384/ha-zw-5pa.json

@@ -210,7 +210,7 @@
 	],
 	"metadata": {
 		"inclusion": "To add the product to the Z-Wave network:\na. Make sure that the Smart Plug has been connected to the power supply.\nb. Set the Z-Wave network main controller into inclusion mode.\nc. Power on.\nd. The LED will blink fast until the inclusion is completed and then the LED will keep turning on or off. Otherwise, the LED will still blink slowly, in which you need to repeat the process from step b",
-		"exclusion": "To remove the product from the Z-Wave network:\na. Insert the Smart Plug to power socket, the LED will follow the status (on or off) of its load’s power level.\nb. Set the Z-Wave network main controller into exclusion mode.\nc. Short press Button 3 times within 1.5 second.\nd. The LED will blink fast until the exclusion is completed, then the LED will keep on blinking slowly. Otherwise, the LED will keep on blink fast for 35 seconds and then follow the status (on or off) of its load status",
+		"exclusion": "To remove the product from the Z-Wave network:\na. Insert the Smart Plug to power socket, the LED will follow the status (on or off) of its load's power level.\nb. Set the Z-Wave network main controller into exclusion mode.\nc. Short press Button 3 times within 1.5 second.\nd. The LED will blink fast until the exclusion is completed, then the LED will keep on blinking slowly. Otherwise, the LED will keep on blink fast for 35 seconds and then follow the status (on or off) of its load status",
 		"reset": "Reset Smart Plug to factory default:\n1. Make sure that the Smart Plug has been connected to the power supply.\n2. Press and hold the Button for 5 seconds.\n3. If holding time is more than one second, the LED will blink faster and faster. If holding time is more than 5 seconds, the LED will be solid for 3 seconds to indicate that the resetting is successful. Otherwise, repeat step 2.\nNote:\nReset to factory will remove Smart Plug from the Z-Wave network. Use this procedure only in the event that the network primary controller missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3007/Aibase%20Smart%20Plug%20(Z-Wave)%20User%20Guide.pdf"
 	}

package/config/devices/0x0384/ha-zw-5sab.json

@@ -218,9 +218,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Add 4-in-1 Motion Sensor into a Z-Wave network: \na. Let the primary controller go into inclusion mode (If you don’t know how to do this, refer to its manual).\nb. Short Press one time this Z-Button.\nc. The 4-in-1 Motion Sensor LED will blink, If the inclusion is successful, then LED will keep on 2 seconds. Otherwise, the LED will blink until timeout, in which case you need to repeat the process from step b.",
-		"exclusion": "Remove 4-in-1 Motion Sensor from a Z-Wave network: \na. Let the primary controller go into exclusion mode (If you don’t know how to do this, refer to its manual).\nb. Short Press one time this Z-Button.\nc. The 4-in-1 Motion Sensor LED will keep on, If the remove is successful, then LED will blink 2 seconds. Otherwise, the LED will keep on until timeout, in which case you need to repeat the process from step b.\n\nNote: 4-in-1 Motion Sensor will go away “Z-Wave SmartStart” Inclusion when it is removed from a Z-Wave network.",
-		"reset": "Reset 4-in-1 Motion Sensor to factory Default:\n1. Press and hold the Z-Button for 5 seconds.\n2. If holding time is more than 5 seconds, the LED will blink fast at acceleration. If reset success 4-in-1 Motion Sensor LED will turn off. When the Z-Button is released, it will send “Device Reset Locally Command”. Otherwise please repeat step 2.\n\nNote:\n1, This procedure should only be used when the primary controller is inoperable.\n2, Reset 4-in-1 Motion Sensor to factory default settings. It will set the 4-in-1 Motion Sensor to not in Z-Wave network state; delete the Association setting and restore the Configuration setting to the default.",
+		"inclusion": "Add 4-in-1 Motion Sensor into a Z-Wave network: \na. Let the primary controller go into inclusion mode (If you don't know how to do this, refer to its manual).\nb. Short Press one time this Z-Button.\nc. The 4-in-1 Motion Sensor LED will blink, If the inclusion is successful, then LED will keep on 2 seconds. Otherwise, the LED will blink until timeout, in which case you need to repeat the process from step b.",
+		"exclusion": "Remove 4-in-1 Motion Sensor from a Z-Wave network: \na. Let the primary controller go into exclusion mode (If you don't know how to do this, refer to its manual).\nb. Short Press one time this Z-Button.\nc. The 4-in-1 Motion Sensor LED will keep on, If the remove is successful, then LED will blink 2 seconds. Otherwise, the LED will keep on until timeout, in which case you need to repeat the process from step b.\n\nNote: 4-in-1 Motion Sensor will go away 'Z-Wave SmartStart' Inclusion when it is removed from a Z-Wave network.",
+		"reset": "Reset 4-in-1 Motion Sensor to factory Default:\n1. Press and hold the Z-Button for 5 seconds.\n2. If holding time is more than 5 seconds, the LED will blink fast at acceleration. If reset success 4-in-1 Motion Sensor LED will turn off. When the Z-Button is released, it will send 'Device Reset Locally Command'. Otherwise please repeat step 2.\n\nNote:\n1, This procedure should only be used when the primary controller is inoperable.\n2, Reset 4-in-1 Motion Sensor to factory default settings. It will set the 4-in-1 Motion Sensor to not in Z-Wave network state; delete the Association setting and restore the Configuration setting to the default.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2943/AIBASE%20Z-Wave%20Multi-Sensor%20UserGuide%2020180606.pdf"
 	}
 }

package/config/devices/0x0384/ha-zw-5sf.json

@@ -81,7 +81,7 @@
 	"metadata": {
 		"inclusion": "1. Insert the battery.\n2. Set the Z-Wave network main controller into Inclusion mode.\n3. Triggering this button action.\n4. If the add for inclusion is successful, the LED will blink fast and then keep on 3 seconds. Otherwise, the LED will blink 25 seconds and then turn off, in which case you need to repeat the process from step 2.",
 		"exclusion": "1. Insert the battery.\n2. Set the Z-Wave network main controller into exclusion mode.\n3. Triggering this button action.\nIf the remove for exclusion is successful, the LED will blink fast and turn off. Otherwise, the LED will keep solid for 25 seconds and then turn off, in which case you need to repeat the process from step 2.",
-		"reset": "Pressing and holding the z-button for 5 seconds, LED will blink for 5 seconds and then keep solid for 3 seconds, after that Water Leak Sensor will send “Device_Reset_Locally” to the main controller and exclude from the Z-Wave network.\n\nUse this procedure only in the event that the network primary controller is missing or otherwise inoperable",
+		"reset": "Pressing and holding the z-button for 5 seconds, LED will blink for 5 seconds and then keep solid for 3 seconds, after that Water Leak Sensor will send 'Device_Reset_Locally' to the main controller and exclude from the Z-Wave network.\n\nUse this procedure only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2906/LEEDARSON%20Z-Wave%20Water%20Leak%20Sensor%20-%20User%20Guide_20180516.pdf"
 	}
 }

package/config/devices/0x038e/tfw-01.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "• To add the unit to the network, put the controller (purchased separately) into the pairing/add/inclusion mode and then press and hold the inclusion/exclusion button on the side of the detector for at least 5 seconds. The blue light will begin to flash to indicate it’s in the pairing mode. When the blue light goes solid, the unit has been included in the network. If the blue light is not illuminated, the unit is not part of a network",
+		"inclusion": "• To add the unit to the network, put the controller (purchased separately) into the pairing/add/inclusion mode and then press and hold the inclusion/exclusion button on the side of the detector for at least 5 seconds. The blue light will begin to flash to indicate it's in the pairing mode. When the blue light goes solid, the unit has been included in the network. If the blue light is not illuminated, the unit is not part of a network",
 		"exclusion": "• To remove the unit from a network put the controller (purchased separately) into the pairing/removal/exclusion mode and then press and hold the inclusion/exclusion button on the side of the detector for at least 5 seconds. The blue light will begin to flash and will go out when the device is removed from the network",
 		"reset": "• This device will perform a Z-Wave factory reset when the exclusion process stated above is followed. Please use this procedure only when the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/2995/Wireless%20Detector%20Manual%20Rev%20H.pdf"

package/config/devices/0x0400/iot.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To include a compatible Z-Wave product to iota, simply navigate to the abode mobile or web app, select “add device”, then select “Other Devices”. Your gateway will now be in inclusion mode and able to pick up any Z-Wave devices also placed into inclusion mode per the manufacturer’s instructions. You may also enable Z-Wave Exclusion mode while in inclusion mode to avoid detecting any Z-Wave devices",
+		"inclusion": "To include a compatible Z-Wave product to iota, simply navigate to the abode mobile or web app, select 'add device', then select 'Other Devices'. Your gateway will now be in inclusion mode and able to pick up any Z-Wave devices also placed into inclusion mode per the manufacturer's instructions. You may also enable Z-Wave Exclusion mode while in inclusion mode to avoid detecting any Z-Wave devices",
 		"exclusion": "You may also enable Z-Wave Exclusion mode while in pairing mode to avoid detecting any Z-Wave devices.\nThe exclusion only takes the step of setting the device into exclusion mode",
 		"reset": "Use this procedure only when the network primary controller is missing or otherwise inoperable. To factory reset iota follow the steps below: \nStep 1. Disconnect the AC adaptor, slide battery switch to OFF. \nStep 2. Press and Hold the right side hidden button located behind the white fabric below the camera lens.\nStep 3. Continue Holding and connect the AC adaptor to the Control Panel. \nStep 4. Keep holding the reset button for a full minute then release. After ~30 seconds, the Iota will restart. (you will see the LEDs flash and some beeps) \nStep 5. Wait for 1 full minute for the reset and re-connection to complete.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3856/Get%20to%20know%20iota_050420.pdf"

package/config/devices/0x0402/nsd-g1000t.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add a device to the Z-Wave network, press the “Inclusion” button in the Android Controller Application",
-		"exclusion": "To remove a device from the Z-Wave network, press the “Exclusion” button in the Android Controller Application",
-		"reset": "Press “RESET” in the Factory Default Reset dialog. This will reset the Z- Wave chip, and the gateway will show “DEVICE RESET LOCALLY NOTIFICATION” after the restart",
+		"inclusion": "To add a device to the Z-Wave network, press the 'Inclusion' button in the Android Controller Application",
+		"exclusion": "To remove a device from the Z-Wave network, press the 'Exclusion' button in the Android Controller Application",
+		"reset": "Press 'RESET' in the Factory Default Reset dialog. This will reset the Z- Wave chip, and the gateway will show 'DEVICE RESET LOCALLY NOTIFICATION' after the restart",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3748/ONUIntegratedServiceRouter_UsersGuide.pdf"
 	}
 }

package/config/devices/0x040b/pgzng1-2adnas.json

@@ -15,7 +15,7 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add a Z-Wave Device:\n1. Click Pulse Devices, and then click Switches, Door Locks, Thermostats, Others.\nThe Z-Wave Devices list screen appears.\n2. Click Add.\n3. Click the Z-Wave device’s “include” button. If you are adding a Z-Wave device with S2 security to an in-home gateway model number PGZNG1 v2, a dialog will prompt you for the 5-digit DSK (Device Specific Key).\n4. Follow the instructions on the dialog:\na. Locate the 5-digit DSK on the Z-Wave device.\nb. Enter the 5-digit DSK.\nc. For assistance in locating the DSK, click the information (i) icon on the dialog.\nd.Press Continue.\n5. Click on the newly added Z-Wave device list item.\n6. In the Name field, enter a name for the Z-Wave device, and then click Save.",
+		"inclusion": "To add a Z-Wave Device:\n1. Click Pulse Devices, and then click Switches, Door Locks, Thermostats, Others.\nThe Z-Wave Devices list screen appears.\n2. Click Add.\n3. Click the Z-Wave device's 'include' button. If you are adding a Z-Wave device with S2 security to an in-home gateway model number PGZNG1 v2, a dialog will prompt you for the 5-digit DSK (Device Specific Key).\n4. Follow the instructions on the dialog:\na. Locate the 5-digit DSK on the Z-Wave device.\nb. Enter the 5-digit DSK.\nc. For assistance in locating the DSK, click the information (i) icon on the dialog.\nd.Press Continue.\n5. Click on the newly added Z-Wave device list item.\n6. In the Name field, enter a name for the Z-Wave device, and then click Save.",
 		"exclusion": "To remove a Z-Wave device, click on the device in the Z-Wave Devices list to open the Z-Wave Device Details screen. Click the Remove button",
 		"reset": "To reset the device, press and hold the reset button on the back of the unit for about 15 seconds. The unit will then restart.\n\nNote: If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to remove and re-add all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this\nCopyright © 2014-2018 ICN Acquisition, LLC. All rights reserved.\nprocedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3665/Z-Wave%20Plus%20Guide%2009-23-19.pdf"

package/config/devices/0x040f/rs-zwirex1.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add or include the RS-ZWIREX1 into a Z-Wave network using Z-wave Learn mode button\n1. Set the controller in inclusion mode\n2. Push the Learn mode button once\n3. Wait about 15 seconds",
-		"exclusion": "To remove or exclude the RS-ZWIREX1 into a Z-Wave network \n1. Set the controller in exclusion mode \n2. Push Z-Wave Learn mode button once\n3. Wait about 5 seconds.",
-		"reset": "The RS-ZWIREX1 can be set to factory settings by pushing Z-wave Learn mode button for 5 seconds. \nPlease use this procedure only when the primary controller is missing or otherwise inoperable",
+		"inclusion": "Push the Learn mode button once. Wait about 15 seconds",
+		"exclusion": "Push Z-Wave Learn mode button once. Wait about 5 seconds",
+		"reset": "Push Z-wave Learn mode button for 5 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3465/QuickGuide_ZWIREX1_0703.pdf"
 	}
 }

package/config/devices/0x0412/lta-ml.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add or include the LTA-ML into a Z-Wave network:\nAfter installing LTA-ML near the PiACK II, and then connecting to the AC Adapter which is included in the same package:\n1. Set the controller in inclusion mode.\n2. Push the “pairing” button once.\n3. Wait 5 seconds.\n4. Confirm the “Home Gateway” LED of the front panel is on.",
-		"exclusion": "To remove or exclude the LTA-ML from a Z-Wave network:\n1. Set the controller in exclusion mode.\n2. Push the “pairing” button 3 times.\n3. Confirm the “Home Gateway” LED of the front panel is off",
-		"reset": "To factory reset the LTA-ML:\n1. Confirm the LTA-ML has been already included into a Z-Wave network.\n2. Remove the AC adapter’s plug and turn off the LTA-ML.\n3. Set the AC adapter’s plug again and wait more than 15 seconds but no longer than 75 seconds.\n4. Push the “pairing” button for 10 seconds and the “Home Gateway” LED turns off.\n※Please use this procedure only when the primary controller is missing or otherwise inoperable.",
+		"inclusion": "To add or include the LTA-ML into a Z-Wave network:\nAfter installing LTA-ML near the PiACK II, and then connecting to the AC Adapter which is included in the same package:\n1. Set the controller in inclusion mode.\n2. Push the 'pairing' button once.\n3. Wait 5 seconds.\n4. Confirm the 'Home Gateway' LED of the front panel is on.",
+		"exclusion": "To remove or exclude the LTA-ML from a Z-Wave network:\n1. Set the controller in exclusion mode.\n2. Push the 'pairing' button 3 times.\n3. Confirm the 'Home Gateway' LED of the front panel is off",
+		"reset": "To factory reset the LTA-ML:\n1. Confirm the LTA-ML has been already included into a Z-Wave network.\n2. Remove the AC adapter's plug and turn off the LTA-ML.\n3. Set the AC adapter's plug again and wait more than 15 seconds but no longer than 75 seconds.\n4. Push the 'pairing' button for 10 seconds and the 'Home Gateway' LED turns off.\n※Please use this procedure only when the primary controller is missing or otherwise inoperable.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3329/Manual.pdf"
 	}
 }

package/config/devices/0x041b/39446_zw3107.json

@@ -135,6 +135,6 @@
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\ndimmer. Repeat as necessary to add the dimmer to\nthe network.\nYou have complete control",
 		"exclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press\nand release the manual/program button on the smart\ndimmer to remove it from the network",
-		"reset": "1. If plugged in, unplug the dimmer from the receptacle\n2. Press and hold the top button, plug the device in and\ncontinue to hold for at least 3 seconds.\nNOTE: This should only be used in the event your network’s\nprimary controller is missing or otherwise inoperable"
+		"reset": "1. If plugged in, unplug the dimmer from the receptacle\n2. Press and hold the top button, plug the device in and\ncontinue to hold for at least 3 seconds.\nNOTE: This should only be used in the event your network's\nprimary controller is missing or otherwise inoperable"
 	}
 }

package/config/devices/0x041b/39449_zw4106.json

@@ -60,6 +60,6 @@
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\nswitch. Repeat as necessary to add the switch to\nthe network",
 		"exclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press\nand release the manual/program button on the smart\nswitch to remove it from the network",
-		"reset": "1. If plugged in, unplug the device from the receptacle.\n2. Press and hold the top button, plug the device in and\ncontinue to hold for at least 3 seconds.\nNOTE: This should only be used in the event your network’s\nprimary controller is missing or otherwise inoperable"
+		"reset": "1. If plugged in, unplug the device from the receptacle.\n2. Press and hold the top button, plug the device in and\ncontinue to hold for at least 3 seconds.\nNOTE: This should only be used in the event your network's\nprimary controller is missing or otherwise inoperable"
 	}
 }

package/config/devices/0x041b/39453_zw4203.json

@@ -79,8 +79,8 @@
 		"mapBasicSet": "event"
 	},
 	"metadata": {
-		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\nswitch to add it in the network.\n3. The controller’s app will indicate if it has discovered the\nswitch. If prompted by the controller to enter the S2\nsecurity code, refer to the QR code/security number on\nthe side of the box or the QR code label on the product\n(see Figure 1). Enter the 5-digit code",
+		"inclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press\nand release the manual/program button on the smart\nswitch to add it in the network.\n3. The controller's app will indicate if it has discovered the\nswitch. If prompted by the controller to enter the S2\nsecurity code, refer to the QR code/security number on\nthe side of the box or the QR code label on the product\n(see Figure 1). Enter the 5-digit code",
 		"exclusion": "1. Follow the instructions for your Z-Wave certified\ncontroller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press\nand release the manual/program button on the smart\nswitch to remove it from the network",
-		"reset": "1. If plugged in, unplug the device from the receptacle.\n2. Press and hold the manual/program button, plug the\ndevice in and continue to hold for at least 3 seconds.\nNOTE: This should only be used in the event your network’s\nprimary controller is missing or otherwise inoperable"
+		"reset": "1. If plugged in, unplug the device from the receptacle.\n2. Press and hold the manual/program button, plug the\ndevice in and continue to hold for at least 3 seconds.\nNOTE: This should only be used in the event your network's\nprimary controller is missing or otherwise inoperable"
 	}
 }

package/config/devices/0x041b/39455_zw4008.json

@@ -80,7 +80,7 @@
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a device to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the top or bottom of the smart switch (rocker) to add it in the network.\nIf prompted by the controller to enter the S2 security code, refer to the QR code/security number on the back of the box, or the QR code label on the product",
 		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a device from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the top or bottom of the smart switch (rocker) to remove it from the network",
-		"reset": "Quickly press ON (top) button three times, then, immediately press the OFF (bottom) button three times. The LED indicator will flash ON/OFF five times when completed successfully.\nNOTE: This should only be used in the event your network’s primary controller is missing or otherwise inoperable",
+		"reset": "Quickly press ON (top) button three times, then, immediately press the OFF (bottom) button three times. The LED indicator will flash ON/OFF five times when completed successfully.\nNOTE: This should only be used in the event your network's primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4169/39455_HQSG_v4.pdf"
 	}
 }

package/config/devices/0x041b/39456_zw1002.json

@@ -60,6 +60,6 @@
 	"metadata": {
 		"inclusion": "1. Follow the instructions for your Z-Wave certified controller to add a\ndevice to the Z-Wave network.\n2. Once the controller is ready to add your device, press and release the\nprogram button. Repeat as necessary to add the smart outlet to\nthe network.\nYou have complete control",
 		"exclusion": "1. Follow the instructions for your Z-Wave certified controller to remove a\ndevice from the Z-Wave network.\n2. Once the controller is ready to remove your device, press and release the\nmanual/program button",
-		"reset": "Quickly press the button three times. Then, press the button for at least three\nseconds. The LED will blink five times to confirm.\nNote: This should only be used in the event your network’s primary controller\nis missing or otherwise inoperable"
+		"reset": "Quickly press the button three times. Then, press the button for at least three\nseconds. The LED will blink five times to confirm.\nNote: This should only be used in the event your network's primary controller\nis missing or otherwise inoperable"
 	}
 }

package/config/devices/0x041b/tuxedow.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. At the TUXEDOW Home screen:\n a) Press the Devices icon and then press the SETUP icon to display “Z-Wave Device Management” screen.\n b) Press the ADD DEVICE icon.\n2. At the device Module:\na) Press the Function Key on the device",
-		"exclusion": "1. At the TUXEDOW Home screen:\n a) Press the Devices and Setup icons to display the “Z-Wave Device Management” screen.\n b) Highlight the device to remove and press the Remove Device icon.\n2. At the device module:\n a) Press the Function Key to remove the device from the keypad",
+		"inclusion": "1. At the TUXEDOW Home screen:\n a) Press the Devices icon and then press the SETUP icon to display 'Z-Wave Device Management' screen.\n b) Press the ADD DEVICE icon.\n2. At the device Module:\na) Press the Function Key on the device",
+		"exclusion": "1. At the TUXEDOW Home screen:\n a) Press the Devices and Setup icons to display the 'Z-Wave Device Management' screen.\n b) Highlight the device to remove and press the Remove Device icon.\n2. At the device module:\n a) Press the Function Key to remove the device from the keypad",
 		"reset": "Please use this procedure only when the network primary controller is missing or otherwise inoperable.\n\nTo activate the Keypad Reset function, press the Setup, System Setup and Advanced Setup icons\n\n1. Enter your Authorized Code and press the Keypad Reset icon.\n\n2. Select OK or Cancel",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3624/800-25178B_QIG_TUXEDOW.pdf"
 	}

package/config/devices/0x0426/jr-4c01.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "To add the device to the Z-Wave network:\n1. Keep the device in Z-Wave range.\n2. Power the device.\n3. Set the main controller in (Security/non-Security Mode) add mode\n (see the controller’s manual).\n4. Quickly, three times press the Config Button, LED color will change \n from Red to Blue.\n5. Wait for the adding process to end.\n6. Successful adding will be confirmed by the Z-Wave controller’s\n Message and LED Colour will change to Green",
-		"exclusion": "To remove the device from the Z-Wave network:\n1. Power the device.\n2. Set the main controller into remove mode (see the controller’s\n manual).\n3. Quickly, three times click the Config button LED color will change to \n Blue.\n4. Wait for the removing process to end.\n5. Successful removing will be confirmed by the Z-Wave controller’s message and Red LED color",
+		"inclusion": "To add the device to the Z-Wave network:\n1. Keep the device in Z-Wave range.\n2. Power the device.\n3. Set the main controller in (Security/non-Security Mode) add mode\n (see the controller's manual).\n4. Quickly, three times press the Config Button, LED color will change \n from Red to Blue.\n5. Wait for the adding process to end.\n6. Successful adding will be confirmed by the Z-Wave controller's\n Message and LED Colour will change to Green",
+		"exclusion": "To remove the device from the Z-Wave network:\n1. Power the device.\n2. Set the main controller into remove mode (see the controller's\n manual).\n3. Quickly, three times click the Config button LED color will change to \n Blue.\n4. Wait for the removing process to end.\n5. Successful removing will be confirmed by the Z-Wave controller's message and Red LED color",
 		"reset": "Reset procedure allows restoring the device back to its factory settings, which means all information about the Z-Wave controller will be deleted.\n\n1. Press and Hold Config Button for 10 sec until White LED Indication \n to start blinking.\n2. Release Config button. Now you have 5sec to Reset Device \n otherwise it back to Normal Mode.\n3. Single Click Config Button.\n4. After a few seconds, the device will be restarted, which is signaled\n with the red LED indicator color.\n\nNOTE:- Please use this procedure only when the network primary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3397/JR-4C01_USER_MANUAL_V1_EN.pdf"
 	}

package/config/devices/0x042a/zd2105us-5.json

@@ -15,9 +15,9 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "For “Inclusion” in (adding to) a network: Put the Z-Wave™ Interface Controller into “inclusion” mode, and following its instruction to add the ZD2105 to your controller. To get in the “inclusion” mode, the distance between sensor and controller is suggested to be in one meter. Press the program switch of ZD2105 then the device will send a signal to be included (or excluded) to/from the network; otherwise, ZD2105 will go to sleep after 20 seconds",
-		"exclusion": "For “Exclusion” from (removing from) a network: Put the Z-Wave™ Interface Controller into “exclusion” mode, and following its instruction to remove the ZD2105 from your controller. Press the program switch of ZD2105 for 1 second at least to be excluded.\nNote: All user and network settings will be cleared and the device reset to factory defaults when the device is excluded",
-		"reset": "Factory Default Reset: Trigger the rear cover switch to send the Alarm Report and trigger the reed switch (close & open) 5 times in 10 seconds, ZD2105 will send the “Device Reset Locally Notification” command and reset to the factory default. \n\n (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
+		"inclusion": "For 'Inclusion' in (adding to) a network: Put the Z-Wave™ Interface Controller into 'inclusion' mode, and following its instruction to add the ZD2105 to your controller. To get in the 'inclusion' mode, the distance between sensor and controller is suggested to be in one meter. Press the program switch of ZD2105 then the device will send a signal to be included (or excluded) to/from the network; otherwise, ZD2105 will go to sleep after 20 seconds",
+		"exclusion": "For 'Exclusion' from (removing from) a network: Put the Z-Wave™ Interface Controller into 'exclusion' mode, and following its instruction to remove the ZD2105 from your controller. Press the program switch of ZD2105 for 1 second at least to be excluded.\nNote: All user and network settings will be cleared and the device reset to factory defaults when the device is excluded",
+		"reset": "Factory Default Reset: Trigger the rear cover switch to send the Alarm Report and trigger the reed switch (close & open) 5 times in 10 seconds, ZD2105 will send the 'Device Reset Locally Notification' command and reset to the factory default. \n\n (Remark: This is to be used only in the case of primary controller being inoperable or otherwise unavailable.)",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=MarketCertificationFiles/3583/ZD2105-5%20GCS.pdf"
 	}
 }

package/config/devices/0x042c/wmbr.json

@@ -15,8 +15,8 @@
 		"max": "255.255"
 	},
 	"metadata": {
-		"inclusion": "1. From the home screen, navigate to the Settings page by pressing the (insert gear icon)\n2. Select the About page\n3. Select ‘Advanced Z-Wave Utilities’\n4. Select ‘Add device’\n5. Refer to the manufacturer’s instruction for inclusion using the DSK (device specific key). A user may attempt to use classic inclusion by entering `00000` as the DSK.\n6. The app will indicate when device inclusion is successful",
-		"exclusion": "EXCLUSION\n1. From the home screen, navigate to the Settings page by pressing the (insert gear icon)\n2. Select the About page\n3. Select ‘Advanced Z-Wave Utilities’\n4. Select ‘Exclude garage opener’ to put the bridge in Exclusion Mode. Refer to the manufacturer’s instruction for exclusion.\n5. The app will indicate when device exclusion is successful.",
+		"inclusion": "1. From the home screen, navigate to the Settings page by pressing the (insert gear icon)\n2. Select the About page\n3. Select ‘Advanced Z-Wave Utilities'\n4. Select ‘Add device'\n5. Refer to the manufacturer's instruction for inclusion using the DSK (device specific key). A user may attempt to use classic inclusion by entering `00000` as the DSK.\n6. The app will indicate when device inclusion is successful",
+		"exclusion": "EXCLUSION\n1. From the home screen, navigate to the Settings page by pressing the (insert gear icon)\n2. Select the About page\n3. Select ‘Advanced Z-Wave Utilities'\n4. Select ‘Exclude garage opener' to put the bridge in Exclusion Mode. Refer to the manufacturer's instruction for exclusion.\n5. The app will indicate when device exclusion is successful.",
 		"reset": "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo factory reset the WiFi Bridge, which will also factory reset and delete all Z-Wave network information, press and hold the button on the back of the bridge for 20 seconds",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3673/Updated%20User%20Manual%209.20.pdf"
 	}

package/config/devices/0x0438/4512711.json

@@ -38,7 +38,7 @@
 	},
 	"metadata": {
 		"inclusion": "Step 1. Make sure the remote control does not belong to any Z-Wave network, short press any button, if LED\nindicator does not turn on, the remote control does not belong to any network, then continue step 2,if LED\nindicator turns on, it means the remote control has already been included to a network, please first set the\nremote control to exclusion mode (refer to the part \"Exclusion\" of this manual),then continue step 2.\nStep 2. Set primary controller/gateway into inclusion mode (Please refer to your primary controllers manual on\nhow to turn your controller into inclusion).\nStep 3. Press and hold down both buttons I and O of Group 2 over 3 seconds, LED indicator turns on, the\nremote control will be set to inclusion mode, and waiting to be included, after 10s LED indicator blinks 6 times\nquickly to indicate successful inclusion. The remote control is a sleepy device, after inclusion it will not enter\ninto sleepy mode immediately, and will continue activation status for 30s and wait data interaction from the\ngateway, the LED indicator will stay solid on, please be patient to wait LED indicator to turn off",
-		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part “Factory Reset” of this manual)",
+		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part 'Factory Reset' of this manual)",
 		"reset": "Press and hold down both buttons I and O of Group 2 for over 10 seconds, LED indicator turns on and then\nblinks 4 times quickly to indicate successful factory reset.Please use this procedure only when the network\nprimary controller is missing or otherwise inoperable",
 		"manual": "https://www.elektroimportoren.no/docs/lib/4512711-Brukerveiledning-5.pdf"
 	}

package/config/devices/0x0438/4512744.json

@@ -374,9 +374,9 @@
 		"preserveEndpoints": "*"
 	},
 	"metadata": {
-		"inclusion": "Adding to a Z-Wave Network (Inclusion)\nMethod 1: Select “Add”, then short press button , the device will send out inclusion request, “Status” will show “Inclusion...”. If there is no response from a gateway within 30 seconds, or inclusion failed, “Status” will show “Fail”. If included successfully, “Status” will show “Inclusion OK” and device ID.\nMethod 2: Operate the gateway into inclusion mode, make sure the device is already removed from previous network, reset power of the device, the device will be included to the gateway automatically",
-		"exclusion": "Removing from a Z-Wave Network (Exclusion)\nSelect “Remove”, then short press button , the device will send out exclusion request, “Status” will show “Exclusion...”. If there is no response from a gateway within 30 seconds, or exclusion failed, “Status” will show “Fail”. If excluded successfully, “Status” will show “Exclusion OK” and device ID will be showed as 0",
-		"reset": "Select “Reset”, then short press button F, the device will start reset, “Status” will show “Reset...”. If there is no response from a gateway within 6 seconds, or exclusion failed, “Status” will show “Fail”. If reset successfully, “Status” will show “Reset OK”",
+		"inclusion": "Adding to a Z-Wave Network (Inclusion)\nMethod 1: Select 'Add', then short press button , the device will send out inclusion request, 'Status' will show 'Inclusion...'. If there is no response from a gateway within 30 seconds, or inclusion failed, 'Status' will show 'Fail'. If included successfully, 'Status' will show 'Inclusion OK' and device ID.\nMethod 2: Operate the gateway into inclusion mode, make sure the device is already removed from previous network, reset power of the device, the device will be included to the gateway automatically",
+		"exclusion": "Removing from a Z-Wave Network (Exclusion)\nSelect 'Remove', then short press button , the device will send out exclusion request, 'Status' will show 'Exclusion...'. If there is no response from a gateway within 30 seconds, or exclusion failed, 'Status' will show 'Fail'. If excluded successfully, 'Status' will show 'Exclusion OK' and device ID will be showed as 0",
+		"reset": "Select 'Reset', then short press button F, the device will start reset, 'Status' will show 'Reset...'. If there is no response from a gateway within 6 seconds, or exclusion failed, 'Status' will show 'Fail'. If reset successfully, 'Status' will show 'Reset OK'",
 		"manual": "https://www.elektroimportoren.no/docs/lib/4512744-Brukerveiledning-5.pdf"
 	}
 }

package/config/devices/0x0438/4512745.json

@@ -374,9 +374,9 @@
 		"preserveEndpoints": "*"
 	},
 	"metadata": {
-		"inclusion": "Adding to a Z-Wave Network (Inclusion)\nMethod 1: Select “Add”, then short press button , the device will send out inclusion request, “Status” will show “Inclusion...”. If there is no response from a gateway within 30 seconds, or inclusion failed, “Status” will show “Fail”. If included successfully, “Status” will show “Inclusion OK” and device ID.\nMethod 2: Operate the gateway into inclusion mode, make sure the device is already removed from previous network, reset power of the device, the device will be included to the gateway automatically",
-		"exclusion": "Removing from a Z-Wave Network (Exclusion)\nSelect “Remove”, then short press button , the device will send out exclusion request, “Status” will show “Exclusion...”. If there is no response from a gateway within 30 seconds, or exclusion failed, “Status” will show “Fail”. If excluded successfully, “Status” will show “Exclusion OK” and device ID will be showed as 0",
-		"reset": "Select “Reset”, then short press button F, the device will start reset, “Status” will show “Reset...”. If there is no response from a gateway within 6 seconds, or exclusion failed, “Status” will show “Fail”. If reset successfully, “Status” will show “Reset OK”",
+		"inclusion": "Adding to a Z-Wave Network (Inclusion)\nMethod 1: Select 'Add', then short press button , the device will send out inclusion request, 'Status' will show 'Inclusion...'. If there is no response from a gateway within 30 seconds, or inclusion failed, 'Status' will show 'Fail'. If included successfully, 'Status' will show 'Inclusion OK' and device ID.\nMethod 2: Operate the gateway into inclusion mode, make sure the device is already removed from previous network, reset power of the device, the device will be included to the gateway automatically",
+		"exclusion": "Removing from a Z-Wave Network (Exclusion)\nSelect 'Remove', then short press button , the device will send out exclusion request, 'Status' will show 'Exclusion...'. If there is no response from a gateway within 30 seconds, or exclusion failed, 'Status' will show 'Fail'. If excluded successfully, 'Status' will show 'Exclusion OK' and device ID will be showed as 0",
+		"reset": "Select 'Reset', then short press button F, the device will start reset, 'Status' will show 'Reset...'. If there is no response from a gateway within 6 seconds, or exclusion failed, 'Status' will show 'Fail'. If reset successfully, 'Status' will show 'Reset OK'",
 		"manual": "https://www.elektroimportoren.no/docs/lib/4512745-Brukerveiledning-5.pdf"
 	}
 }

package/config/devices/0x0438/4512757.json

@@ -404,9 +404,9 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Select menu item “Net”, then find IN and long-press M for 2s.",
-		"exclusion": "Select menu item “Net”, then find OUT and long-press M for 2s.",
-		"reset": "Select menu item “Net”, then find OUT and long-press M for 2s.",
+		"inclusion": "Select menu item 'Net', then find IN and long-press M for 2s.",
+		"exclusion": "Select menu item 'Net', then find OUT and long-press M for 2s.",
+		"reset": "Select menu item 'Net', then find OUT and long-press M for 2s.",
 		"manual": "https://www.elektroimportoren.no/docs/lib/4512757-Manual-18.pdf"
 	},
 	"compat": {

package/config/devices/0x0438/k2.json

@@ -47,7 +47,7 @@
 	],
 	"metadata": {
 		"inclusion": "Step 1. Make sure the remote control does not belong to any Z-Wave network, short press any button, if LED\nindicator does not turn on, the remote control does not belong to any network, then continue step 2,if LED\nindicator turns on, it means the remote control has already been included to a network, please first set the\nremote control to exclusion mode (refer to the part \"Exclusion\" of this manual),then continue step 2.\nStep 2. Set primary controller/gateway into inclusion mode (Please refer to your primary controllers manual on\nhow to turn your controller into inclusion).\nStep 3. Press and hold down both two buttons of Group 2 over 3 seconds, LED indicator turns on, the\nremote control will be set to inclusion mode, and waiting to be included, after 10s LED indicator blinks 6 times\nquickly to indicate successful inclusion. The remote control is a sleepy device, after inclusion it will not enter\ninto sleepy mode immediately, and will continue activation status for 30s and wait data interaction from the\ngateway, the LED indicator will stay solid on, please be patient to wait LED indicator to turn off",
-		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both two buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part “Factory Reset” of this manual)",
+		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both two buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part 'Factory Reset' of this manual)",
 		"reset": "Press and hold down both two buttons for over 10 seconds, LED indicator turns on and then\nblinks 4 times quickly to indicate successful factory reset.Please use this procedure only when the network\nprimary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3910/4512712%20INSTRUCTION%20MANUAL.pdf"
 	}

package/config/devices/0x0438/k4.json

@@ -51,7 +51,7 @@
 	],
 	"metadata": {
 		"inclusion": "Step 1. Make sure the remote control does not belong to any Z-Wave network, short press any button, if LED\nindicator does not turn on, the remote control does not belong to any network, then continue step 2,if LED\nindicator turns on, it means the remote control has already been included to a network, please first set the\nremote control to exclusion mode (refer to the part \"Exclusion\" of this manual),then continue step 2.\nStep 2. Set primary controller/gateway into inclusion mode (Please refer to your primary controllers manual on\nhow to turn your controller into inclusion).\nStep 3. Press and hold down both buttons I and O of Group 2 over 3 seconds, LED indicator turns on, the\nremote control will be set to inclusion mode, and waiting to be included, after 10s LED indicator blinks 6 times\nquickly to indicate successful inclusion. The remote control is a sleepy device, after inclusion it will not enter\ninto sleepy mode immediately, and will continue activation status for 30s and wait data interaction from the\ngateway, the LED indicator will stay solid on, please be patient to wait LED indicator to turn off",
-		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part “Factory Reset” of this manual)",
+		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part 'Factory Reset' of this manual)",
 		"reset": "Press and hold down both buttons I and O of Group 2 for over 10 seconds, LED indicator turns on and then\nblinks 4 times quickly to indicate successful factory reset.Please use this procedure only when the network\nprimary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3911/4512720%20INSTRUCTION%20MANUAL.pdf"
 	}

package/config/devices/0x0438/k8.json

@@ -59,7 +59,7 @@
 	],
 	"metadata": {
 		"inclusion": "Step 1. Make sure the remote control does not belong to any Z-Wave network, short press any button, if LED\nindicator does not turn on, the remote control does not belong to any network, then continue step 2,if LED\nindicator turns on, it means the remote control has already been included to a network, please first set the\nremote control to exclusion mode (refer to the part \"Exclusion\" of this manual),then continue step 2.\nStep 2. Set primary controller/gateway into inclusion mode (Please refer to your primary controllers manual on\nhow to turn your controller into inclusion).\nStep 3. Press and hold down both buttons I and O of Group 2 over 3 seconds, LED indicator turns on, the\nremote control will be set to inclusion mode, and waiting to be included, after 10s LED indicator blinks 6 times\nquickly to indicate successful inclusion. The remote control is a sleepy device, after inclusion it will not enter\ninto sleepy mode immediately, and will continue activation status for 30s and wait data interaction from the\ngateway, the LED indicator will stay solid on, please be patient to wait LED indicator to turn off",
-		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part “Factory Reset” of this manual)",
+		"exclusion": "There are two exclusion methods:\nMethod 1: Exclusion from the primary controller/gateway as follows:\n1. Set the primary controller/gateway into exclusion mode (Please refer to your primary controllers manual on\nhow to set your controller into exclusion).\n2. Press and hold down both buttons and of Group 2 over 3 seconds, LED indicator turns on, the remote\ncontrol will be set to exclusion mode, and waiting to be excluded, after 7s LED indicator blinks 4 times quickly to indicate successful exclusion.\nMethod 2: Factory reset the remote control will force the remote control to be excluded from a network. (please refer to the part 'Factory Reset' of this manual)",
 		"reset": "Press and hold down both buttons I and O of Group 2 for over 10 seconds, LED indicator turns on and then\nblinks 4 times quickly to indicate successful factory reset.Please use this procedure only when the network\nprimary controller is missing or otherwise inoperable",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3639/4512714%20INSTRUCTION%20MANUAL%2020190916.pdf"
 	}

package/config/devices/0x043d/pgd728f_zpu.json

@@ -33,8 +33,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "1. Bring the DoorLock within direct range of your controller.\n2. Carefully remove the battery compartment cover. \n3. Put your Z-Wave controller into inclusion mode. \n4. Simply press the Program button to enter programming mode.\n5. Select “2HB” to enter hub action menu.\n6. Select “AD” and wait doorlock to finish the inclusion",
-		"exclusion": "1. Make sure the DoorLock is powered on and located within direct\n range of your Z-Wave gateway controller .\n2. Put your Z-Wave controller into exclusion mode .\n3. Simply press the Program button to enter programming mode.\n4. Select “2HB” to enter hub action menu.\n5. Select “DE” and wait doorlock to finish the exclusion",
-		"reset": "When your network’s primary controller is missing or otherwise \ninoperable, you may need to reset the device to factory settings \nmanually. Tocomplete \nthe process, make sure your doorlock has not been synced tothe \nsmart phone, then press and hold the reset button at least 3 sec to \nreset the doorlock and Z-Wave module. Also, you can restore the \nlock to factory default settings while the lock is synching with the \nsmartphone.\nWhen executing factory reset, Z-Wave module will issue the following \ninstructions to smart home controller.\nGroup：\"LIFELINE\" group\nInstruction: DEVICE_RESET_LOCALLY_NOTIFICATION"
+		"inclusion": "1. Bring the DoorLock within direct range of your controller.\n2. Carefully remove the battery compartment cover. \n3. Put your Z-Wave controller into inclusion mode. \n4. Simply press the Program button to enter programming mode.\n5. Select '2HB' to enter hub action menu.\n6. Select 'AD' and wait doorlock to finish the inclusion",
+		"exclusion": "1. Make sure the DoorLock is powered on and located within direct\n range of your Z-Wave gateway controller .\n2. Put your Z-Wave controller into exclusion mode .\n3. Simply press the Program button to enter programming mode.\n4. Select '2HB' to enter hub action menu.\n5. Select 'DE' and wait doorlock to finish the exclusion",
+		"reset": "When your network's primary controller is missing or otherwise \ninoperable, you may need to reset the device to factory settings \nmanually. Tocomplete \nthe process, make sure your doorlock has not been synced tothe \nsmart phone, then press and hold the reset button at least 3 sec to \nreset the doorlock and Z-Wave module. Also, you can restore the \nlock to factory default settings while the lock is synching with the \nsmartphone.\nWhen executing factory reset, Z-Wave module will issue the following \ninstructions to smart home controller.\nGroup：\"LIFELINE\" group\nInstruction: DEVICE_RESET_LOCALLY_NOTIFICATION"
 	}
 }

package/config/devices/0x0441/ibt4zwave.json

@@ -267,8 +267,8 @@
 		}
 	],
 	"metadata": {
-		"inclusion": "Install the external antenna before powering the device and adding to the Z-Wave network for the device to automatically detect and enable it (use only antennas and cables compliant with technical specification).\n\n01. Set the Z-Wave gateway into adding mode (see the Z-Wave gateway’s manual)\n02. On the IBT4ZWAVE press and release the S1 button 3 times x3 S1\n03. LEDs on the IBT4ZW AVE will start slow flashing alter nately\n04. If you are adding in Security S2 Authenticated, input the underlined part\nof the DSK (label on the box) DSK: XXXXX-XXXXX-XXXXX-XXXXX XXXXX-XXXXX-XXXXX-XXXXX\n05. When the adding process ends, the LEDs on the IBT4ZWAVE will show adding and antenna status (Table 1 in manual)",
-		"exclusion": "01. Set the Z-Wave gateway into remove mode (see the Z-Wave gateway’s manual)\n02. On the IBT4ZWAVE press and release the S1 button 3 times x3 S1\n03. LEDs on the IBT4ZW AVE will start slow flashing alternately\n04. Wait for the removing process to end",
+		"inclusion": "Install the external antenna before powering the device and adding to the Z-Wave network for the device to automatically detect and enable it (use only antennas and cables compliant with technical specification).\n\n01. Set the Z-Wave gateway into adding mode (see the Z-Wave gateway's manual)\n02. On the IBT4ZWAVE press and release the S1 button 3 times x3 S1\n03. LEDs on the IBT4ZW AVE will start slow flashing alter nately\n04. If you are adding in Security S2 Authenticated, input the underlined part\nof the DSK (label on the box) DSK: XXXXX-XXXXX-XXXXX-XXXXX XXXXX-XXXXX-XXXXX-XXXXX\n05. When the adding process ends, the LEDs on the IBT4ZWAVE will show adding and antenna status (Table 1 in manual)",
+		"exclusion": "01. Set the Z-Wave gateway into remove mode (see the Z-Wave gateway's manual)\n02. On the IBT4ZWAVE press and release the S1 button 3 times x3 S1\n03. LEDs on the IBT4ZW AVE will start slow flashing alternately\n04. Wait for the removing process to end",
 		"reset": "01. Press and hold the S1 button\n03. Wait 3 seconds\n04. LEDs will show adding and antenna status (Table 1 in manual) for 3 seconds\n05. LEDs will turn off for 3 seconds\n06. LEDs will show selected antenna (Table 2 in manual) for 3 seconds\n07. When both LEDs light up simultaneously, release the button\n08. Press and release the S1 button\n09. Both LEDs will flash once at the end of the procedure",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/3837/IBT4ZWAVE-T-v0.7.pdf"
 	},

package/config/devices/0x0445/trf-zw10.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"reset": "Resets the memory of the TRF-ZW10 to factory settings. All existing programming is erased. The gateway requires a download from the URC software in order to be programmed again.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo factory default the TRF-ZW10, turn the gateway over and locate the Reset button. Using a thin object, press and hold the button down for fifteen (15) seconds. \n\nWARNING! Only use this button when instructed by URC’s Technical Support team",
+		"reset": "Resets the memory of the TRF-ZW10 to factory settings. All existing programming is erased. The gateway requires a download from the URC software in order to be programmed again.\n\nIf this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network. If this controller is being used as a secondary controller in the network, use this procedure to reset this controller only in the event that the network primary controller is missing or otherwise inoperable.\n\nTo factory default the TRF-ZW10, turn the gateway over and locate the Reset button. Using a thin object, press and hold the button down for fifteen (15) seconds. \n\nWARNING! Only use this button when instructed by URC's Technical Support team",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4287/URC_Total_Control_TRF-ZW10_OM_rev1.6_08132021.pdf"
 	}
 }

package/config/devices/0x0450/h3ps-wc1.json

@@ -22,7 +22,7 @@
 		}
 	},
 	"metadata": {
-		"reset": "Using the console application you can execute the “Network-Reset” command to factory reset the Z-Wave controller",
+		"reset": "Using the console application you can execute the 'Network-Reset' command to factory reset the Z-Wave controller",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4299/Yardi_Hub_Manual_Console.pdf"
 	}
 }

package/config/devices/0x0452/u-bolt-pro-zwave.json

@@ -24,7 +24,7 @@
 	"metadata": {
 		"inclusion": "Step1\nSet the Z-Wave network main controller or hub into inclusion mode.\n\nStep2\nPress the button 5 on the lock keypad, until you hear beep sound and the indicator light flashes blue. \nIf your Z-Wave hub is Security 2 enabled and requires the Z-Wave QR code or pin code to add the lock automatically, please find it on the back of the battery cover of your smart lock.\n\nStep3\nFollow the instructions of your Z-Wave hub to finish the inclusion process",
 		"exclusion": "Step1\nSet the Z-Wave network main controller or hub into exclusion mode.\n\nStep2\nPress the button 5 on the lock keypad, until you hear the beep sound and the indicator light flashes red. \n\nStep3\nFollow the instructions of your Z-Wave hub to finish the exclusion process",
-		"reset": "CAUTION: Resetting a Z-Wave device without notifying the hub may cause performance problems. Use this procedure only when the Z-Wave hub is missing or otherwise inoperable.\n\nIf you are using U-tec App as Owner, please click “Delete and Reset” to remove the lock from your U-tec Account, then use a Reset Needle to push the Reset Button (at the bottom of Interior Assembly) for around 3 seconds until you hear one long beep and two short beeps.\n\nIf U-Bolt Pro Z-Wave is working as Standalone Mode without the App, please use a Reset Needle to push the Reset Button (at the bottom of Interior Assembly) for around 3 seconds until you hear one long beep and two short beeps.",
+		"reset": "CAUTION: Resetting a Z-Wave device without notifying the hub may cause performance problems. Use this procedure only when the Z-Wave hub is missing or otherwise inoperable.\n\nIf you are using U-tec App as Owner, please click 'Delete and Reset' to remove the lock from your U-tec Account, then use a Reset Needle to push the Reset Button (at the bottom of Interior Assembly) for around 3 seconds until you hear one long beep and two short beeps.\n\nIf U-Bolt Pro Z-Wave is working as Standalone Mode without the App, please use a Reset Needle to push the Reset Button (at the bottom of Interior Assembly) for around 3 seconds until you hear one long beep and two short beeps.",
 		"manual": "https://products.z-wavealliance.org/ProductManual/File?folder=&filename=product_documents/4115/U-Bolt%20Pro%20Z-Wave%20QuickGuide%20V1.4%20成品95x210cm(出血98mmx216mm)%2080g%20双胶纸%20共42P%20骑马钉装订.pdf"
 	}
 }