@pascal-app/core 1.0.5 → 1.0.7

package/dist/systems/stair/stair-structure.d.ts

@@ -0,0 +1,277 @@
+import type { StairConstruction as StairConstructionType, StairNode } from '../../schema/index.js';
+import { type StairStringerStock, type StairStringerType, StairStructure, type StairStructureType, type StairTreadStock } from '../../schema/nodes/stair-structure.js';
+/**
+ * The stair numbers of the IRC (R311.7 stairways, R312 guards) and AWC DCA 6 (deck stairs) the
+ * structure is checked against, in metres.
+ */
+export declare const STAIR_CODE: {
+    /** R311.7.5.1: risers 7-3/4 in at most. */
+    readonly maxRiser: number;
+    /** R311.7.5.2: treads 10 in at least. */
+    readonly minTread: number;
+    /** R311.7.5.3: a 3/4 in to 1-1/4 in nosing, required where the tread is under 11 in. */
+    readonly minNosing: number;
+    readonly maxNosing: number;
+    readonly nosingWaivedTread: number;
+    /** R311.7.1: 36 in wide. */
+    readonly minWidth: number;
+    /** R311.7.2: 6 ft 8 in of headroom. */
+    readonly minHeadroom: number;
+    /** R311.7.3: a flight rises 151 in at most between floors or landings. */
+    readonly maxFlightRise: number;
+    /** R311.7.6: landings at least 36 in in the direction of travel. */
+    readonly minLandingDepth: number;
+    /** R311.7.8: a flight of four or more risers carries a handrail, 34–38 in over the nosings. */
+    readonly handrailRisers: 4;
+    readonly minHandrailHeight: number;
+    readonly maxHandrailHeight: number;
+    /** R312.1.1: a guard where the open side drops more than 30 in. */
+    readonly guardDrop: number;
+    /** R311.7.5.1: open risers must stop a 4 in sphere once the stair rises more than 30 in. */
+    readonly openRiserSphere: number;
+    readonly openRiserFreeRise: number;
+    /** DCA 6: cut stringers at most 18 in o.c. and 6 ft between supports, with a 5 in throat. */
+    readonly cutStringerMaxSpacing: number;
+    readonly cutStringerMaxSpan: number;
+    readonly minThroat: number;
+};
+/** Wood stringer stock, dressed (m). */
+export declare const STAIR_STRINGER_STOCK: Record<StairStringerStock, {
+    thickness: number;
+    depth: number;
+}>;
+/** The steel stringer: an MC12x10.6 channel, 12 in deep with a 1-1/2 in flange. */
+export declare const STAIR_STEEL_STRINGER: {
+    name: string;
+    thickness: number;
+    depth: number;
+};
+/**
+ * Tread stock: the boards laid front to back across one tread (`boards` of `boardWidth`, `gap`
+ * apart; a sheet fills the tread), their thickness, and the finish laid over them.
+ */
+export declare const STAIR_TREAD_STOCK: Record<StairTreadStock, {
+    boards: number;
+    boardWidth: number;
+    thickness: number;
+    gap: number;
+    finish: number;
+}>;
+/** Riser boards are 1x stock, 3/4 in. */
+export declare const STAIR_RISER_THICKNESS: number;
+/** A wood or steel tread's nosing when none is set: 1 in, inside R311.7.5.3's 3/4–1-1/4 in. */
+export declare const DEFAULT_STAIR_NOSING: number;
+/** A housed stringer's top edge stands this far over the nosing line, square to it. */
+export declare const HOUSED_STRINGER_REVEAL: number;
+/** The housing (dado) a housed tread or riser sits in. */
+export declare const STAIR_HOUSING_DEPTH: number;
+export type ResolvedStairStructure = {
+    type: StairStructureType;
+    stringerStock: StairStringerStock;
+    stringerType: StairStringerType;
+    /** The most the stringers may stand apart on centre (m). */
+    stringerSpacing: number;
+    /** The count set by hand; undefined = automatic. */
+    stringerCount: number | undefined;
+    treadStock: StairTreadStock;
+    closedRisers: boolean;
+    treated: boolean;
+    nosing: number;
+    exterior: boolean;
+};
+/** What a structure is read off: the stair's own fields (any of them may be absent). */
+export type StairStructureHost = Partial<Pick<StairNode, 'structure' | 'totalRise' | 'deckSlabId' | 'destinationSurfaceId' | 'stairType'>>;
+/** An exterior stair: one fitted to a deck, porch or patio edge. */
+export declare function stairIsExterior(stair: Pick<StairNode, 'deckSlabId' | 'destinationSurfaceId'>): boolean;
+/**
+ * The stair's structure with every automatic choice made: two 2x6 treads and treated stock on an
+ * exterior stair, a 2x12 tread inside; risers closed once the stair rises more than 30 in; a 1 in
+ * nosing on wood and steel treads. `context` overrides what the stair alone cannot tell (Bones
+ * knows a stair that lands on grade is exterior). Null without a structure.
+ */
+export declare function resolveStairStructure(stair: StairStructureHost, context?: {
+    exterior?: boolean;
+    totalRise?: number;
+}): ResolvedStairStructure | null;
+/**
+ * The structure a stair is framed with: its own, or for a stair drawn before structures existed
+ * the one its body reads as — a concrete flight when it is painted concrete, wood stringers
+ * otherwise.
+ */
+export declare function inferStairStructure(stair: Pick<StairNode, 'structure' | 'material' | 'materialPreset' | 'slots'>): StairStructure;
+/**
+ * The automatic stringer count: enough that no bay between neighbours exceeds `maxSpacing` —
+ * ceil(width / spacing) + 1 — and never fewer than two, or three on a stair 36 in wide or more.
+ */
+export declare function autoStairStringerCount(width: number, maxSpacing: number): number;
+export type StairStringerBand = {
+    index: number;
+    /** Centre across the flight, in the flight's frame (m). */
+    x: number;
+    x0: number;
+    x1: number;
+    thickness: number;
+    depth: number;
+    /** 'cut' — notched under the treads; 'housed' — a solid board over the nosing line. */
+    kind: 'cut' | 'housed';
+    steel: boolean;
+};
+export type StairStringerLayout = {
+    count: number;
+    /** True when the count follows the width and the spacing. */
+    auto: boolean;
+    /** Centre to centre between neighbouring stringers (m). */
+    spacing: number;
+    thickness: number;
+    depth: number;
+    steel: boolean;
+    bands: StairStringerBand[];
+};
+/**
+ * The stringers across a flight of `width`: the outer two flush with its sides and the rest evenly
+ * between them, as many as the structure asks (or as its spacing needs). Housed wood stringers
+ * and steel channels are the outer two; any between them are cut carriages.
+ */
+export declare function resolveStairStringerLayout(width: number, structure: Pick<ResolvedStairStructure, 'type' | 'stringerStock' | 'stringerType' | 'stringerSpacing' | 'stringerCount'>): StairStringerLayout;
+/** A construction a structure draws, carrying the structure so the stringers can be laid out. */
+export type ResolvedStairConstruction = StairConstructionType & {
+    structure?: ResolvedStairStructure;
+};
+/**
+ * The body a structure draws: a solid mass for concrete (its nosing a lip over each riser); open
+ * treads of the tread stock — closed risers when it has them — over the stringers otherwise.
+ */
+export declare function stairStructureConstruction(structure: ResolvedStairStructure): ResolvedStairConstruction;
+/**
+ * The construction a straight stair's structure draws, or null (no structure, or a curved or
+ * spiral stair, which keeps its own body). Memoised on the structure object.
+ */
+export declare function stairStructureConstructionOf(stair: StairStructureHost): ResolvedStairConstruction | null;
+/** A landing's joists and rims: 2x8, 16 in o.c. — a stair landing spans a few feet at most. */
+export declare const STAIR_LANDING_JOIST: {
+    readonly size: '2x8';
+    readonly thickness: number;
+    readonly depth: number;
+};
+export declare const STAIR_LANDING_JOIST_SPACING: number;
+/** A landing's corner posts: 4x4. */
+export declare const STAIR_LANDING_POST: number;
+/** A box in a segment's frame: across `x0..x1`, along the run `z0..z1`, `bottom..top` high. */
+export type StairFrameBox = {
+    x0: number;
+    x1: number;
+    z0: number;
+    z1: number;
+    bottom: number;
+    top: number;
+};
+/**
+ * A wood landing's frame, in the landing's frame (its top at 0): rims all round under the decking
+ * (`drop` thick), joists between them along the run at 16 in o.c., and a 4x4 post under each
+ * corner down to the stair's base `baseDepth` below — none when the frame sits within 6 in of it.
+ */
+export declare function stairLandingFrame(landing: {
+    width: number;
+    length: number;
+}, drop: number, baseDepth: number): {
+    rims: StairFrameBox[];
+    joists: StairFrameBox[];
+    posts: StairFrameBox[];
+};
+/** One flight as its stringers see it. */
+export type StairStringerFlight = {
+    stepCount: number;
+    height: number;
+    length: number;
+    /** The structural tread sits this far under each walking top: the tread and its finish. */
+    treadDrop: number;
+    /** Each riser cut sits this far behind its riser face: the riser board, when there is one. */
+    riserSetback: number;
+    nosing: number;
+    /** False when the flight starts on another flight, not on a floor, pad or landing. */
+    bearsOnBase?: boolean;
+};
+/** The flight a segment and its construction make for the stringers. */
+export declare function stairStringerFlight(segment: {
+    stepCount: number;
+    height: number;
+    length: number;
+}, construction: Pick<StairConstructionType, 'treadThickness' | 'finishThickness' | 'riserThickness' | 'closedRisers' | 'nosing'>): StairStringerFlight;
+export type StairStringerSlice = {
+    index: number;
+    /** Closed (run, height) outline in the flight's frame; always convex. */
+    profile: [number, number][];
+    /** The board's underside: height = slope · run + intercept. */
+    underside: [number, number];
+    top: number;
+};
+/**
+ * The uncut board's edges, as heights over the run (height = slope · run + intercept): a cut
+ * stringer's top edge runs through the outer corners of its notches, a housed one stands
+ * `HOUSED_STRINGER_REVEAL` over the nosing line; the bottom edge is the board's depth under it.
+ */
+export declare function stairStringerEdges(band: Pick<StairStringerBand, 'kind' | 'depth'>, flight: StairStringerFlight): {
+    slope: number;
+    top: number;
+    bottom: number;
+};
+/**
+ * One stringer down a flight, sliced per step (each slice convex, so the viewer extrudes it and
+ * Bones boxes it). A cut stringer is notched for every tread and riser: each slice tops out flat
+ * at its tread seat — the walking top less the tread — its riser cut set back behind the riser
+ * board, its underside the board's bottom edge. A housed stringer is the solid board standing
+ * `HOUSED_STRINGER_REVEAL` over the nosing line. Both are cut level where they bear on the base,
+ * plumb at the top of the run, and a housed one level at the floor it reaches.
+ */
+export declare function stairStringerSlices(band: Pick<StairStringerBand, 'kind' | 'depth'>, flight: StairStringerFlight): StairStringerSlice[];
+export type StairStringerCut = {
+    slices: StairStringerSlice[];
+    /** Rise over run of the flight. */
+    slope: number;
+    /** The board's cut length: the stringer's extent along the slope. */
+    length: number;
+    /** Wood left under the notches, square to the slope (DCA 6 asks 5 in); the board depth when housed. */
+    throat: number;
+    /** The run the stringer bears on its base along (its level cut), or null when it bears on none. */
+    seat: [number, number] | null;
+    /** The plumb cut at the top of the run: its run and the heights it spans. */
+    plumb: {
+        z: number;
+        top: number;
+        bottom: number;
+    };
+    /** The uncut board's top and bottom edges (intercepts: height = slope · run + intercept). */
+    edge: {
+        top: number;
+        bottom: number;
+    };
+};
+/** A stringer's cut: its slices and the numbers the takeoff and the code checks read off them. */
+export declare function stairStringerCut(band: Pick<StairStringerBand, 'kind' | 'depth'>, flight: StairStringerFlight): StairStringerCut;
+/** Inches as a builder reads them, to the nearest eighth: 7.75 in → `7-3/4 in`. */
+export declare function formatStairInches(metres: number): string;
+export type StairStructureIssue = {
+    code: string;
+    severity: 'error' | 'warning';
+    nodeId: string;
+    message: string;
+};
+/**
+ * The IRC R311.7 / R312 and DCA 6 checks a stair with a structure owes: risers, treads, nosings,
+ * width, flight rise, headroom, the handrail on four or more risers, the guard past a 30 in drop,
+ * open risers on a tall stair, and for cut wood stringers their spacing, throat and span. Stairs
+ * without a structure keep the design-target checks alone.
+ */
+export declare function stairStructureDiagnostics(stair: StairNode, flights: readonly {
+    nodeId: string;
+    count: number;
+    rise: number;
+    length: number;
+    width: number;
+    riserHeight: number | null;
+    going: number | null;
+}[], options: {
+    totalRise: number;
+    headroom: number | null;
+}): StairStructureIssue[];
+//# sourceMappingURL=stair-structure.d.ts.map

package/dist/systems/stair/stair-structure.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"stair-structure.d.ts","sourceRoot":"","sources":["../../../src/systems/stair/stair-structure.ts"],"names":[],"mappings":"AAAA,OAAO,KAAK,EAAE,iBAAiB,IAAI,qBAAqB,EAAE,SAAS,EAAE,MAAM,cAAc,CAAA;AAEzF,OAAO,EACL,KAAK,kBAAkB,EACvB,KAAK,iBAAiB,EACtB,cAAc,EACd,KAAK,kBAAkB,EACvB,KAAK,eAAe,EACrB,MAAM,oCAAoC,CAAA;AAa3C;;;GAGG;AACH,eAAO,MAAM,UAAU;IACrB,2CAA2C;aAC3C,QAAQ;IACR,yCAAyC;aACzC,QAAQ;IACR,wFAAwF;aACxF,SAAS;aACT,SAAS;aACT,iBAAiB;IACjB,4BAA4B;aAC5B,QAAQ;IACR,uCAAuC;aACvC,WAAW;IACX,0EAA0E;aAC1E,aAAa;IACb,oEAAoE;aACpE,eAAe;IACf,+FAA+F;aAC/F,cAAc,EAAE,CAAC;aACjB,iBAAiB;aACjB,iBAAiB;IACjB,mEAAmE;aACnE,SAAS;IACT,4FAA4F;aAC5F,eAAe;aACf,iBAAiB;IACjB,6FAA6F;aAC7F,qBAAqB;aACrB,kBAAkB;aAClB,SAAS;CACD,CAAA;AAEV,wCAAwC;AACxC,eAAO,MAAM,oBAAoB,EAAE,MAAM,CACvC,kBAAkB,EAClB;IAAE,SAAS,EAAE,MAAM,CAAC;IAAC,KAAK,EAAE,MAAM,CAAA;CAAE,CAIrC,CAAA;AAED,mFAAmF;AACnF,eAAO,MAAM,oBAAoB;IAAK,IAAI;IAAe,SAAS;IAAY,KAAK;CAAW,CAAA;AAK9F;;;GAGG;AACH,eAAO,MAAM,iBAAiB,EAAE,MAAM,CACpC,eAAe,EACf;IAAE,MAAM,EAAE,MAAM,CAAC;IAAC,UAAU,EAAE,MAAM,CAAC;IAAC,SAAS,EAAE,MAAM,CAAC;IAAC,GAAG,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,CAYvF,CAAA;AAED,yCAAyC;AACzC,eAAO,MAAM,qBAAqB,QAAY,CAAA;AAC9C,+FAA+F;AAC/F,eAAO,MAAM,oBAAoB,QAAS,CAAA;AAC1C,uFAAuF;AACvF,eAAO,MAAM,sBAAsB,QAAS,CAAA;AAG5C,0DAA0D;AAC1D,eAAO,MAAM,mBAAmB,QAAW,CAAA;AAI3C,MAAM,MAAM,sBAAsB,GAAG;IACnC,IAAI,EAAE,kBAAkB,CAAA;IACxB,aAAa,EAAE,kBAAkB,CAAA;IACjC,YAAY,EAAE,iBAAiB,CAAA;IAC/B,4DAA4D;IAC5D,eAAe,EAAE,MAAM,CAAA;IACvB,oDAAoD;IACpD,aAAa,EAAE,MAAM,GAAG,SAAS,CAAA;IACjC,UAAU,EAAE,eAAe,CAAA;IAC3B,YAAY,EAAE,OAAO,CAAA;IACrB,OAAO,EAAE,OAAO,CAAA;IAChB,MAAM,EAAE,MAAM,CAAA;IACd,QAAQ,EAAE,OAAO,CAAA;CAClB,CAAA;AAED,wFAAwF;AACxF,MAAM,MAAM,kBAAkB,GAAG,OAAO,CACtC,IAAI,CAAC,SAAS,EAAE,WAAW,GAAG,WAAW,GAAG,YAAY,GAAG,sBAAsB,GAAG,WAAW,CAAC,CACjG,CAAA;AAED,oEAAoE;AACpE,wBAAgB,eAAe,CAC7B,KAAK,EAAE,IAAI,CAAC,SAAS,EAAE,YAAY,GAAG,sBAAsB,CAAC,GAC5D,OAAO,CAET;AAED;;;;;GAKG;AACH,wBAAgB,qBAAqB,CACnC,KAAK,EAAE,kBAAkB,EACzB,OAAO,GAAE;IAAE,QAAQ,CAAC,EAAE,OAAO,CAAC;IAAC,SAAS,CAAC,EAAE,MAAM,CAAA;CAAO,GACvD,sBAAsB,GAAG,IAAI,CAoB/B;AAED;;;;GAIG;AACH,wBAAgB,mBAAmB,CACjC,KAAK,EAAE,IAAI,CAAC,SAAS,EAAE,WAAW,GAAG,UAAU,GAAG,gBAAgB,GAAG,OAAO,CAAC,GAC5E,cAAc,CAQhB;AAED;;;GAGG;AACH,wBAAgB,sBAAsB,CAAC,KAAK,EAAE,MAAM,EAAE,UAAU,EAAE,MAAM,GAAG,MAAM,CAIhF;AAED,MAAM,MAAM,iBAAiB,GAAG;IAC9B,KAAK,EAAE,MAAM,CAAA;IACb,2DAA2D;IAC3D,CAAC,EAAE,MAAM,CAAA;IACT,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,SAAS,EAAE,MAAM,CAAA;IACjB,KAAK,EAAE,MAAM,CAAA;IACb,uFAAuF;IACvF,IAAI,EAAE,KAAK,GAAG,QAAQ,CAAA;IACtB,KAAK,EAAE,OAAO,CAAA;CACf,CAAA;AAED,MAAM,MAAM,mBAAmB,GAAG;IAChC,KAAK,EAAE,MAAM,CAAA;IACb,6DAA6D;IAC7D,IAAI,EAAE,OAAO,CAAA;IACb,2DAA2D;IAC3D,OAAO,EAAE,MAAM,CAAA;IACf,SAAS,EAAE,MAAM,CAAA;IACjB,KAAK,EAAE,MAAM,CAAA;IACb,KAAK,EAAE,OAAO,CAAA;IACd,KAAK,EAAE,iBAAiB,EAAE,CAAA;CAC3B,CAAA;AAED;;;;GAIG;AACH,wBAAgB,0BAA0B,CACxC,KAAK,EAAE,MAAM,EACb,SAAS,EAAE,IAAI,CACb,sBAAsB,EACtB,MAAM,GAAG,eAAe,GAAG,cAAc,GAAG,iBAAiB,GAAG,eAAe,CAChF,GACA,mBAAmB,CAmCrB;AAED,iGAAiG;AACjG,MAAM,MAAM,yBAAyB,GAAG,qBAAqB,GAAG;IAC9D,SAAS,CAAC,EAAE,sBAAsB,CAAA;CACnC,CAAA;AAED;;;GAGG;AACH,wBAAgB,0BAA0B,CACxC,SAAS,EAAE,sBAAsB,GAChC,yBAAyB,CA6B3B;AAID;;;GAGG;AACH,wBAAgB,4BAA4B,CAC1C,KAAK,EAAE,kBAAkB,GACxB,yBAAyB,GAAG,IAAI,CAUlC;AAED,+FAA+F;AAC/F,eAAO,MAAM,mBAAmB;aAAK,IAAI,EAAE,KAAK;aAAE,SAAS;aAAY,KAAK;CAAsB,CAAA;AAClG,eAAO,MAAM,2BAA2B,QAAU,CAAA;AAClD,qCAAqC;AACrC,eAAO,MAAM,kBAAkB,QAAW,CAAA;AAI1C,+FAA+F;AAC/F,MAAM,MAAM,aAAa,GAAG;IAC1B,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,EAAE,EAAE,MAAM,CAAA;IACV,MAAM,EAAE,MAAM,CAAA;IACd,GAAG,EAAE,MAAM,CAAA;CACZ,CAAA;AAED;;;;GAIG;AACH,wBAAgB,iBAAiB,CAC/B,OAAO,EAAE;IAAE,KAAK,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,EAC1C,IAAI,EAAE,MAAM,EACZ,SAAS,EAAE,MAAM,GAChB;IAAE,IAAI,EAAE,aAAa,EAAE,CAAC;IAAC,MAAM,EAAE,aAAa,EAAE,CAAC;IAAC,KAAK,EAAE,aAAa,EAAE,CAAA;CAAE,CAiC5E;AAED,0CAA0C;AAC1C,MAAM,MAAM,mBAAmB,GAAG;IAChC,SAAS,EAAE,MAAM,CAAA;IACjB,MAAM,EAAE,MAAM,CAAA;IACd,MAAM,EAAE,MAAM,CAAA;IACd,2FAA2F;IAC3F,SAAS,EAAE,MAAM,CAAA;IACjB,8FAA8F;IAC9F,YAAY,EAAE,MAAM,CAAA;IACpB,MAAM,EAAE,MAAM,CAAA;IACd,sFAAsF;IACtF,WAAW,CAAC,EAAE,OAAO,CAAA;CACtB,CAAA;AAED,wEAAwE;AACxE,wBAAgB,mBAAmB,CACjC,OAAO,EAAE;IAAE,SAAS,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,EAC9D,YAAY,EAAE,IAAI,CAChB,qBAAqB,EACrB,gBAAgB,GAAG,iBAAiB,GAAG,gBAAgB,GAAG,cAAc,GAAG,QAAQ,CACpF,GACA,mBAAmB,CASrB;AAED,MAAM,MAAM,kBAAkB,GAAG;IAC/B,KAAK,EAAE,MAAM,CAAA;IACb,yEAAyE;IACzE,OAAO,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,EAAE,CAAA;IAC3B,+DAA+D;IAC/D,SAAS,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,CAAA;IAC3B,GAAG,EAAE,MAAM,CAAA;CACZ,CAAA;AA4BD;;;;GAIG;AACH,wBAAgB,kBAAkB,CAChC,IAAI,EAAE,IAAI,CAAC,iBAAiB,EAAE,MAAM,GAAG,OAAO,CAAC,EAC/C,MAAM,EAAE,mBAAmB,GAC1B;IAAE,KAAK,EAAE,MAAM,CAAC;IAAC,GAAG,EAAE,MAAM,CAAC;IAAC,MAAM,EAAE,MAAM,CAAA;CAAE,CAUhD;AAED;;;;;;;GAOG;AACH,wBAAgB,mBAAmB,CACjC,IAAI,EAAE,IAAI,CAAC,iBAAiB,EAAE,MAAM,GAAG,OAAO,CAAC,EAC/C,MAAM,EAAE,mBAAmB,GAC1B,kBAAkB,EAAE,CAuDtB;AAED,MAAM,MAAM,gBAAgB,GAAG;IAC7B,MAAM,EAAE,kBAAkB,EAAE,CAAA;IAC5B,mCAAmC;IACnC,KAAK,EAAE,MAAM,CAAA;IACb,qEAAqE;IACrE,MAAM,EAAE,MAAM,CAAA;IACd,uGAAuG;IACvG,MAAM,EAAE,MAAM,CAAA;IACd,mGAAmG;IACnG,IAAI,EAAE,CAAC,MAAM,EAAE,MAAM,CAAC,GAAG,IAAI,CAAA;IAC7B,6EAA6E;IAC7E,KAAK,EAAE;QAAE,CAAC,EAAE,MAAM,CAAC;QAAC,GAAG,EAAE,MAAM,CAAC;QAAC,MAAM,EAAE,MAAM,CAAA;KAAE,CAAA;IACjD,6FAA6F;IAC7F,IAAI,EAAE;QAAE,GAAG,EAAE,MAAM,CAAC;QAAC,MAAM,EAAE,MAAM,CAAA;KAAE,CAAA;CACtC,CAAA;AAED,kGAAkG;AAClG,wBAAgB,gBAAgB,CAC9B,IAAI,EAAE,IAAI,CAAC,iBAAiB,EAAE,MAAM,GAAG,OAAO,CAAC,EAC/C,MAAM,EAAE,mBAAmB,GAC1B,gBAAgB,CAyBlB;AAED,mFAAmF;AACnF,wBAAgB,iBAAiB,CAAC,MAAM,EAAE,MAAM,GAAG,MAAM,CAWxD;AAED,MAAM,MAAM,mBAAmB,GAAG;IAChC,IAAI,EAAE,MAAM,CAAA;IACZ,QAAQ,EAAE,OAAO,GAAG,SAAS,CAAA;IAC7B,MAAM,EAAE,MAAM,CAAA;IACd,OAAO,EAAE,MAAM,CAAA;CAChB,CAAA;AAED;;;;;GAKG;AACH,wBAAgB,yBAAyB,CACvC,KAAK,EAAE,SAAS,EAChB,OAAO,EAAE,SAAS;IAChB,MAAM,EAAE,MAAM,CAAA;IACd,KAAK,EAAE,MAAM,CAAA;IACb,IAAI,EAAE,MAAM,CAAA;IACZ,MAAM,EAAE,MAAM,CAAA;IACd,KAAK,EAAE,MAAM,CAAA;IACb,WAAW,EAAE,MAAM,GAAG,IAAI,CAAA;IAC1B,KAAK,EAAE,MAAM,GAAG,IAAI,CAAA;CACrB,EAAE,EACH,OAAO,EAAE;IAAE,SAAS,EAAE,MAAM,CAAC;IAAC,QAAQ,EAAE,MAAM,GAAG,IAAI,CAAA;CAAE,GACtD,mBAAmB,EAAE,CAsIvB"}