@antv/l7-layers 2.9.24 → 2.9.26-alpha.0

package/es/polygon/shaders/water/polygon_ocean_frag.glsl

@@ -1,248 +0,0 @@
-
-uniform float u_time: 0.0;
-uniform float u_opacity: 1.0;
-
-varying vec2 v_uv;
-varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
-
-float coast2water_fadedepth = 0.10;
-float large_waveheight      = .750; // change to adjust the "heavy" waves
-float large_wavesize        = 3.4;  // factor to adjust the large wave size
-float small_waveheight      = 0.6;  // change to adjust the small random waves
-float small_wavesize        = 0.5;   // factor to ajust the small wave size
-float water_softlight_fact  = 15.;  // range [1..200] (should be << smaller than glossy-fact)
-float water_glossylight_fact= 120.; // range [1..200]
-float particle_amount       = 70.;
-// vec3 watercolor             = vec3(0.43, 0.60, 0.66); // 'transparent' low-water color (RGB)
-// vec3 watercolor2            = vec3(0.06, 0.07, 0.11); // deep-water color (RGB, should be darker than the low-water color)
-uniform vec4 u_watercolor;
-uniform vec4 u_watercolor2;
-vec3 water_specularcolor    = vec3(1.3, 1.3, 0.9);    // specular Color (RGB) of the water-highlights
-#define light                 vec3(-0., sin(u_time*0.5)*.5 + .35, 2.8) // position of the sun
-
-uniform sampler2D u_texture1;
-uniform sampler2D u_texture2;
-uniform sampler2D u_texture3;
-
-  
-
-float hash( float n ) {
-    return fract(sin(n)*43758.5453123);
-}
-
-// 2d noise function
-float noise1( in vec2 x ) {
-  vec2 p  = floor(x);
-  vec2 f  = smoothstep(0.0, 1.0, fract(x));
-  float n = p.x + p.y*57.0;
-  return mix(mix( hash(n+  0.0), hash(n+  1.0),f.x),
-    mix( hash(n+ 57.0), hash(n+ 58.0),f.x),f.y);
-}
-
-float noise(vec2 p) {
-    return texture2D(u_texture2,p*vec2(1./256.)).x;
-}
-
-vec4 highness(vec2 p) {
-    vec4 t = texture2D(u_texture1,fract(p));
-    float clipped = -2.0-smoothstep(3.,10.,t.a)*6.9-smoothstep(10.,100.,t.a)*89.9-smoothstep(0.,10000.,t.a)*10000.0;
-    return clamp(t, 0.0,3.0)+clamp(t/3.0-1.0, 0.0,1.0)+clamp(t/16.0-1.0, 0.0,1.0);
-}
-
-float height_map( vec2 p ) {
-    vec4 height=highness(p);
-    /*
-    height = -0.5+
-        0.5*smoothstep(-100.,0.,-height)+
-        2.75*smoothstep(0.,2.,height)+
-        1.75*smoothstep(2.,4.,height)+
-        2.75*smoothstep(4.,16.,height)+
-        1.5*smoothstep(16.,1000.,height);
-    */
-
-    mat2 m = mat2( 0.9563*1.4,  -0.2924*1.4,  0.2924*1.4,  0.9563*1.4 );
-    //p = p*6.;
-    float f = 0.6000*noise1( p ); p = m*p*1.1*6.;
-    f += 0.2500*noise( p ); p = m*p*1.32;
-    f += 0.1666*noise( p ); p = m*p*1.11;
-    f += 0.0834*noise( p ); p = m*p*1.12;
-    f += 0.0634*noise( p ); p = m*p*1.13;
-    f += 0.0444*noise( p ); p = m*p*1.14;
-    f += 0.0274*noise( p ); p = m*p*1.15;
-    f += 0.0134*noise( p ); p = m*p*1.16;
-    f += 0.0104*noise( p ); p = m*p*1.17;
-    f += 0.0084*noise( p );
-    f = .25*f+dot(height,vec4(-.03125,-.125,.25,.25))*.5;
-        const float FLAT_LEVEL = 0.92525;
-        //f = f*0.25+height*0.75;
-    if (f<FLAT_LEVEL)
-        f = f;
-    else
-        f = pow((f-FLAT_LEVEL)/(1.-FLAT_LEVEL), 2.)*(1.-FLAT_LEVEL)*2.0+FLAT_LEVEL; // makes a smooth coast-increase
-    return clamp(f, 0., 10.);
-}
-
-vec3 plasma_quintic( float x ) {
-    x = clamp( x, 0.0, 1.0);
-    vec4 x1 = vec4( 1.0, x, x * x, x * x * x ); // 1 x x2 x3
-    vec4 x2 = x1 * x1.w * x; // x4 x5 x6 x7
-    return vec3(
-        dot( x1.xyzw, vec4( +0.063861086, +1.992659096, -1.023901152, -0.490832805 ) ) + dot( x2.xy, vec2( +1.308442123, -0.914547012 ) ),
-        dot( x1.xyzw, vec4( +0.049718590, -0.791144343, +2.892305078, +0.811726816 ) ) + dot( x2.xy, vec2( -4.686502417, +2.717794514 ) ),
-        dot( x1.xyzw, vec4( +0.513275779, +1.580255060, -5.164414457, +4.559573646 ) ) + dot( x2.xy, vec2( -1.916810682, +0.570638854 ) ) );
-}
-
-vec4 color(vec2 p){
-    vec4 c1 = vec4(1.7,1.6,.9,1);
-    vec4 c2 = vec4(.2,.94,.1,1);
-    vec4 c3 = vec4(.3,.2,.0,1);
-    vec4 c4 = vec4(.99,.99,1.6,1);
-    vec4 v = highness(p);
-    float los = smoothstep(0.1,1.1,v.b);
-    float his = smoothstep(3.5,6.5,v.b);
-    float ces = smoothstep(1.,5.,v.a);
-    vec4 lo = mix(c1,c2,los);
-    vec4 hi = mix(c3,c4,his);
-    vec4 ce = mix(lo,hi,ces);
-
-    return vec4(plasma_quintic(ces),1).ragb;
-}
-
-vec3 terrain_map( vec2 p )
-{
-  return color(p).rgb*0.75+0.25*vec3(0.7, .55, .4)+texture2D(u_texture3, fract(p*5.)).rgb*.5; // test-terrain is simply 'sandstone'
-}
-
-const mat2 m = mat2( 0.72, -1.60,  1.60,  0.72 );
-
-float water_map( vec2 p, float height ) {
-    vec2 p2 = p*large_wavesize;
-    vec2 shift1 = 0.001*vec2( u_time*160.0*2.0, u_time*120.0*2.0 );
-    vec2 shift2 = 0.001*vec2( u_time*190.0*2.0, -u_time*130.0*2.0 );
-
-    // coarse crossing 'ocean' waves...
-    float f = 0.6000*noise( p );
-    f += 0.2500*noise( p*m );
-    f += 0.1666*noise( p*m*m );
-    float wave = sin(p2.x*0.622+p2.y*0.622+shift2.x*4.269)*large_waveheight*f*height*height ;
-
-    p *= small_wavesize;
-    f = 0.;
-    float amp = 1.0, s = .5;
-    for (int i=0; i<9; i++)
-    { p = m*p*.947; f -= amp*abs(sin((noise( p+shift1*s )-.5)*2.)); amp = amp*.59; s*=-1.329; }
-    
-    return wave+f*small_waveheight;
-}
-
-float nautic(vec2 p) {
-    p *= 18.;
-    float f = 0.;
-    float amp = 1.0, s = .5;
-    for (int i=0; i<3; i++)
-    { p = m*p*1.2; f += amp*abs(smoothstep(0., 1., noise( p+u_time*s ))-.5); amp = amp*.5; s*=-1.227; }
-    return pow(1.-f, 5.);
-}
-
-float particles(vec2 p) {
-    p *= 200.;
-    float f = 0.;
-    float amp = 1.0, s = 1.5;
-    for (int i=0; i<3; i++)
-    { p = m*p*1.2; f += amp*noise( p+u_time*s ); amp = amp*.5; s*=-1.227; }
-    return pow(f*.35, 7.)*particle_amount;
-}
-
-float test_shadow( vec2 xy, float height) {
-    vec3 r0 = vec3(xy, height);
-    vec3 rd = normalize( light - r0 );
-    
-    float hit = 1.0;
-    float t   = 0.001;
-    for (int j=1; j<25; j++)
-    {
-        vec3 p = r0 + t*rd;
-        float h = height_map( p.xy );
-        float height_diff = p.z - h;
-        if (height_diff<0.0)
-        {
-            return 0.0;
-        }
-        t += 0.01+height_diff*.02;
-        hit = min(hit, 2.*height_diff/t); // soft shaddow   
-    }
-    return hit;
-}
-
-vec3 CalcTerrain(vec2 uv, float height) {
-    vec3 col = terrain_map( uv );
-    vec2 iResolution = vec2(512.);
-    float h1 = height_map(uv-vec2(0., 0.5)/ iResolution.xy);
-    float h2 = height_map(uv+vec2(0., 0.5)/ iResolution.xy);
-    float h3 = height_map(uv-vec2(0.5, 0.)/ iResolution.xy);
-    float h4 = height_map(uv+vec2(0.5, 0.)/ iResolution.xy);
-    vec3 norm = normalize(vec3(h3-h4, h1-h2, 1.));
-    vec3 r0 = vec3(uv, height);
-    vec3 rd = normalize( light - r0 );
-    float grad = dot(norm, rd);
-    col *= grad+pow(grad, 8.);
-    float terrainshade = test_shadow( uv, height );
-    col = mix(col*.25, col, terrainshade);
-    return col;
-}
-
-
-void main() {
-  vec3 watercolor = u_watercolor.rgb;
-  vec3 watercolor2 = u_watercolor2.rgb;
-  vec2 uv = v_uv;
-  float WATER_LEVEL = 0.84; // Water level (range: 0.0 - 2.0)
-  float deepwater_fadedepth   = 0.4 + coast2water_fadedepth;
-  float height = height_map( uv );
-  vec3 col;
-
-    float waveheight = clamp(WATER_LEVEL*3.-1.5, 0., 1.);
-    float level = WATER_LEVEL + .2*water_map(uv*15. + vec2(u_time*.1), waveheight);
-    if (height > level)
-    {
-        col = CalcTerrain(uv, height);
-    }
-    if (height <= level)
-    {
-        vec2 dif = vec2(.0, .01);
-        vec2 pos = uv*15. + vec2(u_time*.01);
-        float h1 = water_map(pos-dif,waveheight);
-        float h2 = water_map(pos+dif,waveheight);
-        float h3 = water_map(pos-dif.yx,waveheight);
-        float h4 = water_map(pos+dif.yx,waveheight);
-        vec3 normwater = normalize(vec3(h3-h4, h1-h2, .125)); // norm-vector of the 'bumpy' water-plane
-        uv += normwater.xy*.002*(level-height);
-        
-        col = CalcTerrain(uv, height);
-
-        float coastfade = clamp((level-height)/coast2water_fadedepth, 0., 1.);
-        float coastfade2= clamp((level-height)/deepwater_fadedepth, 0., 1.);
-        float intensity = col.r*.2126+col.g*.7152+col.b*.0722;
-        watercolor = mix(watercolor*intensity, watercolor2, smoothstep(0., 1., coastfade2));
-
-        vec3 r0 = vec3(uv, WATER_LEVEL);
-        vec3 rd = normalize( light - r0 ); // ray-direction to the light from water-position
-        float grad     = dot(normwater, rd); // dot-product of norm-vector and light-direction
-        float specular = pow(grad, water_softlight_fact);  // used for soft highlights                          
-        float specular2= pow(grad, water_glossylight_fact); // used for glossy highlights
-        float gradpos  = dot(vec3(0., 0., 1.), rd);
-        float specular1= smoothstep(0., 1., pow(gradpos, 5.));  // used for diffusity (some darker corona around light's specular reflections...)                          
-        float watershade  = test_shadow( uv, level );
-        watercolor *= 2.2+watershade;
-        watercolor += (.2+.8*watershade) * ((grad-1.0)*.5+specular) * .25;
-        watercolor /= (1.+specular1*1.25);
-        watercolor += watershade*specular2*water_specularcolor;
-        watercolor += watershade*coastfade*(1.-coastfade2)*(vec3(.5, .6, .7)*nautic(uv)+vec3(1., 1., 1.)*particles(uv));
-        
-        col = mix(col, watercolor, coastfade);
-    }
-    
-
-  float opacity = styleMappingMat[0][0];
-  gl_FragColor = vec4(col, opacity);  
-}

package/es/polygon/shaders/water/polygon_ocean_vert.glsl

@@ -1,52 +0,0 @@
-attribute vec2 a_uv;
-attribute vec3 a_Position;
-uniform mat4 u_ModelMatrix;
-uniform mat4 u_Mvp;
-
-varying vec2 v_uv;
-uniform float u_opacity: 1.0;
-varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
-
-#pragma include "styleMapping"
-#pragma include "styleMappingCalOpacity"
-
-#pragma include "projection"
-
-void main() {
-  v_uv = a_uv;
-  // cal style mapping - 数据纹理映射部分的计算
-styleMappingMat = mat4(
-    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
-    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
-    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
-    0.0, 0.0, 0.0, 0.0
-  );
-
-  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
-  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
-  float columnWidth = 1.0/columnCount;  // 列宽
-  float rowHeight = 1.0/rowCount;       // 行高
-  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
-  float id = a_vertexId; // 第n个顶点
-  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
-  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
-  
-  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
-  // 按顺序从 cell 中取值、若没有则自动往下取值
-  float textureOffset = 0.0; // 在 cell 中取值的偏移量
-
-  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
-  styleMappingMat[0][0] = opacityAndOffset.r;
-  textureOffset = opacityAndOffset.g;
-  // cal style mapping - 数据纹理映射部分的计算
-
-  vec4 project_pos = project_position(vec4(a_Position, 1.0));
-  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
-
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
-  } else {
-    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
-  }
-}
-

package/es/polygon/shaders/water/polygon_water_frag.glsl

@@ -1,73 +0,0 @@
-uniform sampler2D u_texture;
-uniform float u_time: 0.0;
-uniform float u_speed: 1.0;
-uniform float u_opacity: 1.0;
-
-varying vec4 v_Color;
-varying vec2 v_uv;
-varying mat4 styleMappingMat; // 传递从片元中传递的映射数据
-
-
-float rand(vec2 n) { return 0.5 + 0.5 * fract(sin(dot(n.xy, vec2(12.9898, 78.233)))* 43758.5453); }
-
-float water(vec3 p) {
-  float t = u_time * u_speed;
-  p.z += t * 2.; p.x += t * 2.;
-  vec3 c1 = texture2D(u_texture, p.xz / 30.).xyz;
-  p.z += t * 3.; p.x += t * 0.52;
-  vec3 c2 = texture2D(u_texture, p.xz / 30.).xyz;
-  p.z += t * 4.; p.x += t * 0.8;
-  vec3 c3 = texture2D(u_texture, p.xz / 30.).xyz;
-  c1 += c2 - c3;
-  float z = (c1.x + c1.y + c1.z) / 3.;
-  return p.y + z / 4.;
-}
-
-float map(vec3 p) {
-  float d = 100.0;
-  d = water(p);
-  return d;
-}
-
-float intersect(vec3 ro, vec3 rd) {
-  float d = 0.0;
-  for (int i = 0; i <= 100; i++) {
-    float h = map(ro + rd * d);
-    if (h < 0.1) return  d;
-    d += h;
-  }
-  return 0.0;
-}
-
-vec3 norm(vec3 p) {
-  float eps = .1;
-  return normalize(vec3(
-    map(p + vec3(eps, 0, 0)) - map(p + vec3(-eps, 0, 0)),
-    map(p + vec3(0, eps, 0)) - map(p + vec3(0, -eps, 0)),
-    map(p + vec3(0, 0, eps)) - map(p + vec3(0, 0, -eps))
-  ));
-} 
-
-float calSpc() {
-  vec3 l1 = normalize(vec3(1, 1, 1));
-  vec3 ro = vec3(-3, 20, -8);
-  vec3 rc = vec3(0, 0, 0);
-  vec3 ww = normalize(rc - ro);
-  vec3 uu = normalize(cross(vec3(0,1,0), ww));
-  vec3 vv = normalize(cross(rc - ro, uu));
-  vec3 rd = normalize(uu * v_uv.x + vv * v_uv.y + ww);
-  float d = intersect(ro, rd);
-  vec3 p = ro + rd * d;
-  vec3 n = norm(p);
-  float spc = pow(max(0.0, dot(reflect(l1, n), rd)), 30.0);
-  return spc;
-}
-
-void main() {
-  float opacity = styleMappingMat[0][0];
-  gl_FragColor = v_Color;
-  gl_FragColor.a *= opacity;
-
-  float spc = calSpc();
-  gl_FragColor += spc * 0.4;
-}

package/es/polygon/shaders/water/polygon_water_vert.glsl

@@ -1,55 +0,0 @@
-attribute vec4 a_Color;
-attribute vec2 a_uv;
-attribute vec3 a_Position;
-uniform mat4 u_ModelMatrix;
-uniform mat4 u_Mvp;
-
-varying vec4 v_Color;
-varying vec2 v_uv;
-uniform float u_opacity: 1.0;
-varying mat4 styleMappingMat; // 用于将在顶点着色器中计算好的样式值传递给片元
-
-#pragma include "styleMapping"
-#pragma include "styleMappingCalOpacity"
-
-#pragma include "projection"
-
-void main() {
-  v_uv = a_uv;
-  // cal style mapping - 数据纹理映射部分的计算
-styleMappingMat = mat4(
-    0.0, 0.0, 0.0, 0.0, // opacity - strokeOpacity - strokeWidth - empty
-    0.0, 0.0, 0.0, 0.0, // strokeR - strokeG - strokeB - strokeA
-    0.0, 0.0, 0.0, 0.0, // offsets[0] - offsets[1]
-    0.0, 0.0, 0.0, 0.0
-  );
-
-  float rowCount = u_cellTypeLayout[0][0];    // 当前的数据纹理有几行
-  float columnCount = u_cellTypeLayout[0][1]; // 当看到数据纹理有几列
-  float columnWidth = 1.0/columnCount;  // 列宽
-  float rowHeight = 1.0/rowCount;       // 行高
-  float cellCount = calCellCount(); // opacity - strokeOpacity - strokeWidth - stroke - offsets
-  float id = a_vertexId; // 第n个顶点
-  float cellCurrentRow = floor(id * cellCount / columnCount) + 1.0; // 起始点在第几行
-  float cellCurrentColumn = mod(id * cellCount, columnCount) + 1.0; // 起始点在第几列
-  
-  // cell 固定顺序 opacity -> strokeOpacity -> strokeWidth -> stroke ... 
-  // 按顺序从 cell 中取值、若没有则自动往下取值
-  float textureOffset = 0.0; // 在 cell 中取值的偏移量
-
-  vec2 opacityAndOffset = calOpacityAndOffset(cellCurrentRow, cellCurrentColumn, columnCount, textureOffset, columnWidth, rowHeight);
-  styleMappingMat[0][0] = opacityAndOffset.r;
-  textureOffset = opacityAndOffset.g;
-  // cal style mapping - 数据纹理映射部分的计算
-
-  v_Color = a_Color;
-  vec4 project_pos = project_position(vec4(a_Position, 1.0));
-  // gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
-
-  if(u_CoordinateSystem == COORDINATE_SYSTEM_P20_2) { // gaode2.x
-    gl_Position = u_Mvp * (vec4(project_pos.xyz, 1.0));
-  } else {
-    gl_Position = project_common_position_to_clipspace(vec4(project_pos.xyz, 1.0));
-  }
-}
-

package/es/raster/buffers/triangulation.d.ts

@@ -1,6 +0,0 @@
-import { IParseDataItem } from '@antv/l7-core';
-export declare function RasterTriangulation(parserData: IParseDataItem): {
-    vertices: number[];
-    indices: number[];
-    size: number;
-};

package/es/raster/buffers/triangulation.js

@@ -1,28 +0,0 @@
-// @ts-ignore
-import Martini from '@mapbox/martini';
-export function RasterTriangulation(parserData) {
-  var coordinates = parserData.coordinates,
-      data = parserData.data,
-      min = parserData.min,
-      max = parserData.max,
-      width = parserData.width,
-      height = parserData.height;
-  var maxlength = Math.max(width, height);
-  var gridSize = Math.pow(2, Math.ceil(Math.log2(maxlength))) + 1;
-  var terrain = new Float32Array(gridSize * gridSize);
-
-  for (var i = 0; i < width; i++) {
-    for (var j = 0; j < height; j++) {
-      terrain[i * gridSize + j] = data[i * width + j];
-    }
-  }
-
-  var martini = new Martini(gridSize);
-  var tile = martini.createTile(terrain);
-  var mesh = tile.getMesh(gridSize / 2);
-  return {
-    vertices: Array.from(mesh.vertices),
-    indices: Array.from(mesh.triangles),
-    size: 2
-  };
-}

package/es/raster/index.d.ts

@@ -1,19 +0,0 @@
-import BaseLayer from '../core/BaseLayer';
-import { IRasterLayerStyleOptions } from '../core/interface';
-import { RasterModelType } from './models/index';
-export default class RaterLayer extends BaseLayer<IRasterLayerStyleOptions> {
-    type: string;
-    buildModels(): void;
-    rebuildModels(): void;
-    protected getConfigSchema(): {
-        properties: {
-            opacity: {
-                type: string;
-                minimum: number;
-                maximum: number;
-            };
-        };
-    };
-    protected getDefaultConfig(): {} | {} | {};
-    protected getModelType(): RasterModelType;
-}

package/es/raster/index.js

@@ -1,104 +0,0 @@
-import _classCallCheck from "@babel/runtime/helpers/classCallCheck";
-import _createClass from "@babel/runtime/helpers/createClass";
-import _assertThisInitialized from "@babel/runtime/helpers/assertThisInitialized";
-import _inherits from "@babel/runtime/helpers/inherits";
-import _possibleConstructorReturn from "@babel/runtime/helpers/possibleConstructorReturn";
-import _getPrototypeOf from "@babel/runtime/helpers/getPrototypeOf";
-import _defineProperty from "@babel/runtime/helpers/defineProperty";
-
-function _createSuper(Derived) { var hasNativeReflectConstruct = _isNativeReflectConstruct(); return function _createSuperInternal() { var Super = _getPrototypeOf(Derived), result; if (hasNativeReflectConstruct) { var NewTarget = _getPrototypeOf(this).constructor; result = Reflect.construct(Super, arguments, NewTarget); } else { result = Super.apply(this, arguments); } return _possibleConstructorReturn(this, result); }; }
-
-function _isNativeReflectConstruct() { if (typeof Reflect === "undefined" || !Reflect.construct) return false; if (Reflect.construct.sham) return false; if (typeof Proxy === "function") return true; try { Boolean.prototype.valueOf.call(Reflect.construct(Boolean, [], function () {})); return true; } catch (e) { return false; } }
-
-import BaseLayer from "../core/BaseLayer";
-import RasterModels from "./models/index";
-
-var RaterLayer = /*#__PURE__*/function (_BaseLayer) {
-  _inherits(RaterLayer, _BaseLayer);
-
-  var _super = _createSuper(RaterLayer);
-
-  function RaterLayer() {
-    var _this;
-
-    _classCallCheck(this, RaterLayer);
-
-    for (var _len = arguments.length, args = new Array(_len), _key = 0; _key < _len; _key++) {
-      args[_key] = arguments[_key];
-    }
-
-    _this = _super.call.apply(_super, [this].concat(args));
-
-    _defineProperty(_assertThisInitialized(_this), "type", 'RasterLayer');
-
-    return _this;
-  }
-
-  _createClass(RaterLayer, [{
-    key: "buildModels",
-    value: function buildModels() {
-      var _this2 = this;
-
-      var modelType = this.getModelType();
-      this.layerModel = new RasterModels[modelType](this);
-      this.layerModel.initModels(function (models) {
-        _this2.models = models;
-
-        _this2.renderLayers();
-      });
-    }
-  }, {
-    key: "rebuildModels",
-    value: function rebuildModels() {
-      var _this3 = this;
-
-      this.layerModel.buildModels(function (models) {
-        return _this3.models = models;
-      });
-    }
-  }, {
-    key: "getConfigSchema",
-    value: function getConfigSchema() {
-      return {
-        properties: {
-          opacity: {
-            type: 'number',
-            minimum: 0,
-            maximum: 1
-          }
-        }
-      };
-    }
-  }, {
-    key: "getDefaultConfig",
-    value: function getDefaultConfig() {
-      var type = this.getModelType();
-      var defaultConfig = {
-        raster: {},
-        raster3d: {},
-        rasterTile: {}
-      };
-      return defaultConfig[type];
-    }
-  }, {
-    key: "getModelType",
-    value: function getModelType() {
-      // 根据 source 的类型判断 model type
-      switch (this.layerSource.parser.type) {
-        case 'raster':
-          return 'raster';
-
-        case 'rasterTile':
-          return 'rasterTile';
-
-        default:
-          return 'raster';
-      } // return 'raster';
-
-    }
-  }]);
-
-  return RaterLayer;
-}(BaseLayer);
-
-export { RaterLayer as default };

package/es/raster/models/index.d.ts

@@ -1,5 +0,0 @@
-export declare type RasterModelType = 'raster' | 'raster3d' | 'rasterTile';
-declare const RasterModels: {
-    [key in RasterModelType]: any;
-};
-export default RasterModels;

package/es/raster/models/index.js

@@ -1,8 +0,0 @@
-import RasterTileModel from "../../tile/models/tileModel";
-import RasterModel from "./raster";
-var RasterModels = {
-  raster: RasterModel,
-  raster3d: RasterModel,
-  rasterTile: RasterTileModel
-};
-export default RasterModels;

package/es/raster/models/raster.d.ts

@@ -1,21 +0,0 @@
-import { IModel, ITexture2D } from '@antv/l7-core';
-import BaseModel from '../../core/BaseModel';
-export default class RasterModel extends BaseModel {
-    protected texture: ITexture2D;
-    protected colorTexture: ITexture2D;
-    private rampColors;
-    getUninforms(): {
-        u_opacity: number;
-        u_texture: ITexture2D;
-        u_domain: [number, number];
-        u_clampLow: boolean;
-        u_clampHigh: boolean;
-        u_noDataValue: number;
-        u_colorTexture: ITexture2D;
-    };
-    initModels(callbackModel: (models: IModel[]) => void): void;
-    buildModels(callbackModel: (models: IModel[]) => void): void;
-    clearModels(): void;
-    protected registerBuiltinAttributes(): void;
-    private updateColorTexure;
-}