wasmtime 19.0.2 → 20.0.0

data/ext/cargo-vendor/cranelift-codegen-0.106.2/src/machinst/vcode.rs

@@ -1,1809 +0,0 @@
-//! This implements the VCode container: a CFG of Insts that have been lowered.
-//!
-//! VCode is virtual-register code. An instruction in VCode is almost a machine
-//! instruction; however, its register slots can refer to virtual registers in
-//! addition to real machine registers.
-//!
-//! VCode is structured with traditional basic blocks, and
-//! each block must be terminated by an unconditional branch (one target), a
-//! conditional branch (two targets), or a return (no targets). Note that this
-//! slightly differs from the machine code of most ISAs: in most ISAs, a
-//! conditional branch has one target (and the not-taken case falls through).
-//! However, we expect that machine backends will elide branches to the following
-//! block (i.e., zero-offset jumps), and will be able to codegen a branch-cond /
-//! branch-uncond pair if *both* targets are not fallthrough. This allows us to
-//! play with layout prior to final binary emission, as well, if we want.
-//!
-//! See the main module comment in `mod.rs` for more details on the VCode-based
-//! backend pipeline.
-
-use crate::fx::FxHashMap;
-use crate::fx::FxHashSet;
-use crate::ir::pcc::*;
-use crate::ir::{self, types, Constant, ConstantData, ValueLabel};
-use crate::machinst::*;
-use crate::timing;
-use crate::trace;
-use crate::CodegenError;
-use crate::{LabelValueLoc, ValueLocRange};
-use regalloc2::{
-    Edit, Function as RegallocFunction, InstOrEdit, InstRange, MachineEnv, Operand, OperandKind,
-    PRegSet, RegClass,
-};
-
-use cranelift_entity::{entity_impl, Keys};
-use std::collections::hash_map::Entry;
-use std::collections::HashMap;
-use std::fmt;
-
-/// Index referring to an instruction in VCode.
-pub type InsnIndex = regalloc2::Inst;
-
-/// Index referring to a basic block in VCode.
-pub type BlockIndex = regalloc2::Block;
-
-/// VCodeInst wraps all requirements for a MachInst to be in VCode: it must be
-/// a `MachInst` and it must be able to emit itself at least to a `SizeCodeSink`.
-pub trait VCodeInst: MachInst + MachInstEmit {}
-impl<I: MachInst + MachInstEmit> VCodeInst for I {}
-
-/// A function in "VCode" (virtualized-register code) form, after
-/// lowering.  This is essentially a standard CFG of basic blocks,
-/// where each basic block consists of lowered instructions produced
-/// by the machine-specific backend.
-///
-/// Note that the VCode is immutable once produced, and is not
-/// modified by register allocation in particular. Rather, register
-/// allocation on the `VCode` produces a separate `regalloc2::Output`
-/// struct, and this can be passed to `emit`. `emit` in turn does not
-/// modify the vcode, but produces an `EmitResult`, which contains the
-/// machine code itself, and the associated disassembly and/or
-/// metadata as requested.
-pub struct VCode<I: VCodeInst> {
-    /// VReg IR-level types.
-    vreg_types: Vec<Type>,
-
-    /// Lowered machine instructions in order corresponding to the original IR.
-    insts: Vec<I>,
-
-    /// Operands: pre-regalloc references to virtual registers with
-    /// constraints, in one flattened array. This allows the regalloc
-    /// to efficiently access all operands without requiring expensive
-    /// matches or method invocations on insts.
-    operands: Vec<Operand>,
-
-    /// Operand index ranges: for each instruction in `insts`, there
-    /// is a tuple here providing the range in `operands` for that
-    /// instruction's operands.
-    operand_ranges: Vec<(u32, u32)>,
-
-    /// Clobbers: a sparse map from instruction indices to clobber masks.
-    clobbers: FxHashMap<InsnIndex, PRegSet>,
-
-    /// Source locations for each instruction. (`SourceLoc` is a `u32`, so it is
-    /// reasonable to keep one of these per instruction.)
-    srclocs: Vec<RelSourceLoc>,
-
-    /// Entry block.
-    entry: BlockIndex,
-
-    /// Block instruction indices.
-    block_ranges: Vec<(InsnIndex, InsnIndex)>,
-
-    /// Block successors: index range in the `block_succs_preds` list.
-    block_succ_range: Vec<(u32, u32)>,
-
-    /// Block predecessors: index range in the `block_succs_preds` list.
-    block_pred_range: Vec<(u32, u32)>,
-
-    /// Block successor and predecessor lists, concatenated into one
-    /// Vec. The `block_succ_range` and `block_pred_range` lists of
-    /// tuples above give (start, end) ranges within this list that
-    /// correspond to each basic block's successors or predecessors,
-    /// respectively.
-    block_succs_preds: Vec<regalloc2::Block>,
-
-    /// Block parameters: index range in `block_params` below.
-    block_params_range: Vec<(u32, u32)>,
-
-    /// Block parameter lists, concatenated into one vec. The
-    /// `block_params_range` list of tuples above gives (start, end)
-    /// ranges within this list that correspond to each basic block's
-    /// blockparam vregs.
-    block_params: Vec<regalloc2::VReg>,
-
-    /// Outgoing block arguments on branch instructions, concatenated
-    /// into one list.
-    ///
-    /// Note that this is conceptually a 3D array: we have a VReg list
-    /// per block, per successor. We flatten those three dimensions
-    /// into this 1D vec, then store index ranges in two levels of
-    /// indirection.
-    ///
-    /// Indexed by the indices in `branch_block_arg_succ_range`.
-    branch_block_args: Vec<regalloc2::VReg>,
-
-    /// Array of sequences of (start, end) tuples in
-    /// `branch_block_args`, one for each successor; these sequences
-    /// for each block are concatenated.
-    ///
-    /// Indexed by the indices in `branch_block_arg_succ_range`.
-    branch_block_arg_range: Vec<(u32, u32)>,
-
-    /// For a given block, indices in `branch_block_arg_range`
-    /// corresponding to all of its successors.
-    branch_block_arg_succ_range: Vec<(u32, u32)>,
-
-    /// VReg aliases. Each key in this table is translated to its
-    /// value when gathering Operands from instructions. Aliases are
-    /// not chased transitively (we do not further look up the
-    /// translated reg to see if it is another alias).
-    ///
-    /// We use these aliases to rename an instruction's expected
-    /// result vregs to the returned vregs from lowering, which are
-    /// usually freshly-allocated temps.
-    ///
-    /// Operands and branch arguments will already have been
-    /// translated through this alias table; but it helps to make
-    /// sense of instructions when pretty-printed, for example.
-    vreg_aliases: FxHashMap<regalloc2::VReg, regalloc2::VReg>,
-
-    /// Block-order information.
-    block_order: BlockLoweringOrder,
-
-    /// ABI object.
-    pub(crate) abi: Callee<I::ABIMachineSpec>,
-
-    /// Constant information used during code emission. This should be
-    /// immutable across function compilations within the same module.
-    emit_info: I::Info,
-
-    /// Reference-typed `regalloc2::VReg`s. The regalloc requires
-    /// these in a dense slice (as opposed to querying the
-    /// reftype-status of each vreg) for efficient iteration.
-    reftyped_vregs: Vec<VReg>,
-
-    /// Constants.
-    pub(crate) constants: VCodeConstants,
-
-    /// Value labels for debuginfo attached to vregs.
-    debug_value_labels: Vec<(VReg, InsnIndex, InsnIndex, u32)>,
-
-    pub(crate) sigs: SigSet,
-
-    /// Facts on VRegs, for proof-carrying code verification.
-    facts: Vec<Option<Fact>>,
-}
-
-/// The result of `VCode::emit`. Contains all information computed
-/// during emission: actual machine code, optionally a disassembly,
-/// and optionally metadata about the code layout.
-pub struct EmitResult {
-    /// The MachBuffer containing the machine code.
-    pub buffer: MachBufferFinalized<Stencil>,
-
-    /// Offset of each basic block, recorded during emission. Computed
-    /// only if `debug_value_labels` is non-empty.
-    pub bb_offsets: Vec<CodeOffset>,
-
-    /// Final basic-block edges, in terms of code offsets of
-    /// bb-starts. Computed only if `debug_value_labels` is non-empty.
-    pub bb_edges: Vec<(CodeOffset, CodeOffset)>,
-
-    /// Final length of function body.
-    pub func_body_len: CodeOffset,
-
-    /// The pretty-printed disassembly, if any. This uses the same
-    /// pretty-printing for MachInsts as the pre-regalloc VCode Debug
-    /// implementation, but additionally includes the prologue and
-    /// epilogue(s), and makes use of the regalloc results.
-    pub disasm: Option<String>,
-
-    /// Offsets of sized stackslots.
-    pub sized_stackslot_offsets: PrimaryMap<StackSlot, u32>,
-
-    /// Offsets of dynamic stackslots.
-    pub dynamic_stackslot_offsets: PrimaryMap<DynamicStackSlot, u32>,
-
-    /// Value-labels information (debug metadata).
-    pub value_labels_ranges: ValueLabelsRanges,
-
-    /// Stack frame size.
-    pub frame_size: u32,
-}
-
-/// A builder for a VCode function body.
-///
-/// This builder has the ability to accept instructions in either
-/// forward or reverse order, depending on the pass direction that
-/// produces the VCode. The lowering from CLIF to VCode<MachInst>
-/// ordinarily occurs in reverse order (in order to allow instructions
-/// to be lowered only if used, and not merged) so a reversal will
-/// occur at the end of lowering to ensure the VCode is in machine
-/// order.
-///
-/// If built in reverse, block and instruction indices used once the
-/// VCode is built are relative to the final (reversed) order, not the
-/// order of construction. Note that this means we do not know the
-/// final block or instruction indices when building, so we do not
-/// hand them out. (The user is assumed to know them when appending
-/// terminator instructions with successor blocks.)
-pub struct VCodeBuilder<I: VCodeInst> {
-    /// In-progress VCode.
-    pub(crate) vcode: VCode<I>,
-
-    /// In what direction is the build occuring?
-    direction: VCodeBuildDirection,
-
-    /// Index of the last block-start in the vcode.
-    block_start: usize,
-
-    /// Start of succs for the current block in the concatenated succs list.
-    succ_start: usize,
-
-    /// Start of blockparams for the current block in the concatenated
-    /// blockparams list.
-    block_params_start: usize,
-
-    /// Start of successor blockparam arg list entries in
-    /// the concatenated branch_block_arg_range list.
-    branch_block_arg_succ_start: usize,
-
-    /// Current source location.
-    cur_srcloc: RelSourceLoc,
-
-    /// Debug-value label in-progress map, keyed by label. For each
-    /// label, we keep disjoint ranges mapping to vregs. We'll flatten
-    /// this into (vreg, range, label) tuples when done.
-    debug_info: FxHashMap<ValueLabel, Vec<(InsnIndex, InsnIndex, VReg)>>,
-}
-
-/// Direction in which a VCodeBuilder builds VCode.
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum VCodeBuildDirection {
-    // TODO: add `Forward` once we need it and can test it adequately.
-    /// Backward-build pass: we expect the producer to call `emit()`
-    /// with instructions in reverse program order within each block.
-    Backward,
-}
-
-impl<I: VCodeInst> VCodeBuilder<I> {
-    /// Create a new VCodeBuilder.
-    pub fn new(
-        sigs: SigSet,
-        abi: Callee<I::ABIMachineSpec>,
-        emit_info: I::Info,
-        block_order: BlockLoweringOrder,
-        constants: VCodeConstants,
-        direction: VCodeBuildDirection,
-    ) -> VCodeBuilder<I> {
-        let vcode = VCode::new(sigs, abi, emit_info, block_order, constants);
-
-        VCodeBuilder {
-            vcode,
-            direction,
-            block_start: 0,
-            succ_start: 0,
-            block_params_start: 0,
-            branch_block_arg_succ_start: 0,
-            cur_srcloc: Default::default(),
-            debug_info: FxHashMap::default(),
-        }
-    }
-
-    pub fn init_abi(&mut self, temps: Vec<Writable<Reg>>) {
-        self.vcode.abi.init(&self.vcode.sigs, temps);
-    }
-
-    /// Access the ABI object.
-    pub fn abi(&self) -> &Callee<I::ABIMachineSpec> {
-        &self.vcode.abi
-    }
-
-    /// Access the ABI object.
-    pub fn abi_mut(&mut self) -> &mut Callee<I::ABIMachineSpec> {
-        &mut self.vcode.abi
-    }
-
-    pub fn sigs(&self) -> &SigSet {
-        &self.vcode.sigs
-    }
-
-    pub fn sigs_mut(&mut self) -> &mut SigSet {
-        &mut self.vcode.sigs
-    }
-
-    /// Access to the BlockLoweringOrder object.
-    pub fn block_order(&self) -> &BlockLoweringOrder {
-        &self.vcode.block_order
-    }
-
-    /// Set the current block as the entry block.
-    pub fn set_entry(&mut self, block: BlockIndex) {
-        self.vcode.entry = block;
-    }
-
-    /// End the current basic block. Must be called after emitting vcode insts
-    /// for IR insts and prior to ending the function (building the VCode).
-    pub fn end_bb(&mut self) {
-        let start_idx = self.block_start;
-        let end_idx = self.vcode.insts.len();
-        self.block_start = end_idx;
-        // Add the instruction index range to the list of blocks.
-        self.vcode
-            .block_ranges
-            .push((InsnIndex::new(start_idx), InsnIndex::new(end_idx)));
-        // End the successors list.
-        let succ_end = self.vcode.block_succs_preds.len();
-        self.vcode
-            .block_succ_range
-            .push((self.succ_start as u32, succ_end as u32));
-        self.succ_start = succ_end;
-        // End the blockparams list.
-        let block_params_end = self.vcode.block_params.len();
-        self.vcode
-            .block_params_range
-            .push((self.block_params_start as u32, block_params_end as u32));
-        self.block_params_start = block_params_end;
-        // End the branch blockparam args list.
-        let branch_block_arg_succ_end = self.vcode.branch_block_arg_range.len();
-        self.vcode.branch_block_arg_succ_range.push((
-            self.branch_block_arg_succ_start as u32,
-            branch_block_arg_succ_end as u32,
-        ));
-        self.branch_block_arg_succ_start = branch_block_arg_succ_end;
-    }
-
-    pub fn add_block_param(&mut self, param: VirtualReg) {
-        self.vcode.block_params.push(param.into());
-    }
-
-    fn add_branch_args_for_succ(&mut self, args: &[Reg]) {
-        let start = self.vcode.branch_block_args.len();
-        self.vcode
-            .branch_block_args
-            .extend(args.iter().map(|&arg| VReg::from(arg)));
-        let end = self.vcode.branch_block_args.len();
-        self.vcode
-            .branch_block_arg_range
-            .push((start as u32, end as u32));
-    }
-
-    /// Push an instruction for the current BB and current IR inst
-    /// within the BB.
-    pub fn push(&mut self, insn: I) {
-        self.vcode.insts.push(insn);
-        self.vcode.srclocs.push(self.cur_srcloc);
-    }
-
-    /// Add a successor block with branch args.
-    pub fn add_succ(&mut self, block: BlockIndex, args: &[Reg]) {
-        self.vcode.block_succs_preds.push(block);
-        self.add_branch_args_for_succ(args);
-    }
-
-    /// Set the current source location.
-    pub fn set_srcloc(&mut self, srcloc: RelSourceLoc) {
-        self.cur_srcloc = srcloc;
-    }
-
-    /// Add a debug value label to a register.
-    pub fn add_value_label(&mut self, reg: Reg, label: ValueLabel) {
-        // We'll fix up labels in reverse(). Because we're generating
-        // code bottom-to-top, the liverange of the label goes *from*
-        // the last index at which was defined (or 0, which is the end
-        // of the eventual function) *to* just this instruction, and
-        // no further.
-        let inst = InsnIndex::new(self.vcode.insts.len());
-        let labels = self.debug_info.entry(label).or_insert_with(|| vec![]);
-        let last = labels
-            .last()
-            .map(|(_start, end, _vreg)| *end)
-            .unwrap_or(InsnIndex::new(0));
-        labels.push((last, inst, reg.into()));
-    }
-
-    pub fn set_vreg_alias(&mut self, from: Reg, to: Reg) {
-        let from = from.into();
-        let resolved_to = self.vcode.resolve_vreg_alias(to.into());
-        // Disallow cycles (see below).
-        assert_ne!(resolved_to, from);
-        self.vcode.vreg_aliases.insert(from, resolved_to);
-    }
-
-    /// Access the constants.
-    pub fn constants(&mut self) -> &mut VCodeConstants {
-        &mut self.vcode.constants
-    }
-
-    fn compute_preds_from_succs(&mut self) {
-        // Compute predecessors from successors. In order to gather
-        // all preds for a block into a contiguous sequence, we build
-        // a list of (succ, pred) tuples and then sort.
-        let mut succ_pred_edges: Vec<(BlockIndex, BlockIndex)> =
-            Vec::with_capacity(self.vcode.block_succs_preds.len());
-        for (pred, &(start, end)) in self.vcode.block_succ_range.iter().enumerate() {
-            let pred = BlockIndex::new(pred);
-            for i in start..end {
-                let succ = BlockIndex::new(self.vcode.block_succs_preds[i as usize].index());
-                succ_pred_edges.push((succ, pred));
-            }
-        }
-        succ_pred_edges.sort_unstable();
-
-        let mut i = 0;
-        for succ in 0..self.vcode.num_blocks() {
-            let succ = BlockIndex::new(succ);
-            let start = self.vcode.block_succs_preds.len();
-            while i < succ_pred_edges.len() && succ_pred_edges[i].0 == succ {
-                let pred = succ_pred_edges[i].1;
-                self.vcode.block_succs_preds.push(pred);
-                i += 1;
-            }
-            let end = self.vcode.block_succs_preds.len();
-            self.vcode.block_pred_range.push((start as u32, end as u32));
-        }
-    }
-
-    /// Called once, when a build in Backward order is complete, to
-    /// perform the overall reversal (into final forward order) and
-    /// finalize metadata accordingly.
-    fn reverse_and_finalize(&mut self) {
-        let n_insts = self.vcode.insts.len();
-        if n_insts == 0 {
-            return;
-        }
-
-        // Reverse the per-block and per-inst sequences.
-        self.vcode.block_ranges.reverse();
-        // block_params_range is indexed by block (and blocks were
-        // traversed in reverse) so we reverse it; but block-param
-        // sequences in the concatenated vec can remain in reverse
-        // order (it is effectively an arena of arbitrarily-placed
-        // referenced sequences).
-        self.vcode.block_params_range.reverse();
-        // Likewise, we reverse block_succ_range, but the block_succ
-        // concatenated array can remain as-is.
-        self.vcode.block_succ_range.reverse();
-        self.vcode.insts.reverse();
-        self.vcode.srclocs.reverse();
-        // Likewise, branch_block_arg_succ_range is indexed by block
-        // so must be reversed.
-        self.vcode.branch_block_arg_succ_range.reverse();
-
-        // To translate an instruction index *endpoint* in reversed
-        // order to forward order, compute `n_insts - i`.
-        //
-        // Why not `n_insts - 1 - i`? That would be correct to
-        // translate an individual instruction index (for ten insts 0
-        // to 9 inclusive, inst 0 becomes 9, and inst 9 becomes
-        // 0). But for the usual inclusive-start, exclusive-end range
-        // idiom, inclusive starts become exclusive ends and
-        // vice-versa, so e.g. an (inclusive) start of 0 becomes an
-        // (exclusive) end of 10.
-        let translate = |inst: InsnIndex| InsnIndex::new(n_insts - inst.index());
-
-        // Edit the block-range instruction indices.
-        for tuple in &mut self.vcode.block_ranges {
-            let (start, end) = *tuple;
-            *tuple = (translate(end), translate(start)); // Note reversed order.
-        }
-
-        // Generate debug-value labels based on per-label maps.
-        for (label, tuples) in &self.debug_info {
-            for &(start, end, vreg) in tuples {
-                let vreg = self.vcode.resolve_vreg_alias(vreg);
-                let fwd_start = translate(end);
-                let fwd_end = translate(start);
-                self.vcode
-                    .debug_value_labels
-                    .push((vreg, fwd_start, fwd_end, label.as_u32()));
-            }
-        }
-
-        // Now sort debug value labels by VReg, as required
-        // by regalloc2.
-        self.vcode
-            .debug_value_labels
-            .sort_unstable_by_key(|(vreg, _, _, _)| *vreg);
-    }
-
-    fn collect_operands(&mut self) {
-        for (i, insn) in self.vcode.insts.iter().enumerate() {
-            // Push operands from the instruction onto the operand list.
-            //
-            // We rename through the vreg alias table as we collect
-            // the operands. This is better than a separate post-pass
-            // over operands, because it has more cache locality:
-            // operands only need to pass through L1 once. This is
-            // also better than renaming instructions'
-            // operands/registers while lowering, because here we only
-            // need to do the `match` over the instruction to visit
-            // its register fields (which is slow, branchy code) once.
-
-            let vreg_aliases = &self.vcode.vreg_aliases;
-            let allocatable = PRegSet::from(self.vcode.machine_env());
-            let mut op_collector =
-                OperandCollector::new(&mut self.vcode.operands, allocatable, |vreg| {
-                    VCode::<I>::resolve_vreg_alias_impl(vreg_aliases, vreg)
-                });
-            insn.get_operands(&mut op_collector);
-            let (ops, clobbers) = op_collector.finish();
-            self.vcode.operand_ranges.push(ops);
-
-            if clobbers != PRegSet::default() {
-                self.vcode.clobbers.insert(InsnIndex::new(i), clobbers);
-            }
-
-            if let Some((dst, src)) = insn.is_move() {
-                // We should never see non-virtual registers present in move
-                // instructions.
-                assert!(
-                    src.is_virtual(),
-                    "the real register {:?} was used as the source of a move instruction",
-                    src
-                );
-                assert!(
-                    dst.to_reg().is_virtual(),
-                    "the real register {:?} was used as the destination of a move instruction",
-                    dst.to_reg()
-                );
-            }
-        }
-
-        // Translate blockparam args via the vreg aliases table as well.
-        for arg in &mut self.vcode.branch_block_args {
-            let new_arg = VCode::<I>::resolve_vreg_alias_impl(&self.vcode.vreg_aliases, *arg);
-            trace!("operandcollector: block arg {:?} -> {:?}", arg, new_arg);
-            *arg = new_arg;
-        }
-    }
-
-    /// Build the final VCode.
-    pub fn build(mut self, vregs: VRegAllocator<I>) -> VCode<I> {
-        self.vcode.vreg_types = vregs.vreg_types;
-        self.vcode.facts = vregs.facts;
-        self.vcode.reftyped_vregs = vregs.reftyped_vregs;
-
-        if self.direction == VCodeBuildDirection::Backward {
-            self.reverse_and_finalize();
-        }
-        self.collect_operands();
-
-        // Apply register aliases to the `reftyped_vregs` list since this list
-        // will be returned directly to `regalloc2` eventually and all
-        // operands/results of instructions will use the alias-resolved vregs
-        // from `regalloc2`'s perspective.
-        //
-        // Also note that `reftyped_vregs` can't have duplicates, so after the
-        // aliases are applied duplicates are removed.
-        for reg in self.vcode.reftyped_vregs.iter_mut() {
-            *reg = VCode::<I>::resolve_vreg_alias_impl(&self.vcode.vreg_aliases, *reg);
-        }
-        self.vcode.reftyped_vregs.sort();
-        self.vcode.reftyped_vregs.dedup();
-
-        self.compute_preds_from_succs();
-        self.vcode.debug_value_labels.sort_unstable();
-        self.vcode
-    }
-}
-
-/// Is this type a reference type?
-fn is_reftype(ty: Type) -> bool {
-    ty == types::R64 || ty == types::R32
-}
-
-const NO_INST_OFFSET: CodeOffset = u32::MAX;
-
-impl<I: VCodeInst> VCode<I> {
-    /// New empty VCode.
-    fn new(
-        sigs: SigSet,
-        abi: Callee<I::ABIMachineSpec>,
-        emit_info: I::Info,
-        block_order: BlockLoweringOrder,
-        constants: VCodeConstants,
-    ) -> VCode<I> {
-        let n_blocks = block_order.lowered_order().len();
-        VCode {
-            sigs,
-            vreg_types: vec![],
-            insts: Vec::with_capacity(10 * n_blocks),
-            operands: Vec::with_capacity(30 * n_blocks),
-            operand_ranges: Vec::with_capacity(10 * n_blocks),
-            clobbers: FxHashMap::default(),
-            srclocs: Vec::with_capacity(10 * n_blocks),
-            entry: BlockIndex::new(0),
-            block_ranges: Vec::with_capacity(n_blocks),
-            block_succ_range: Vec::with_capacity(n_blocks),
-            block_succs_preds: Vec::with_capacity(2 * n_blocks),
-            block_pred_range: Vec::with_capacity(n_blocks),
-            block_params_range: Vec::with_capacity(n_blocks),
-            block_params: Vec::with_capacity(5 * n_blocks),
-            branch_block_args: Vec::with_capacity(10 * n_blocks),
-            branch_block_arg_range: Vec::with_capacity(2 * n_blocks),
-            branch_block_arg_succ_range: Vec::with_capacity(n_blocks),
-            block_order,
-            abi,
-            emit_info,
-            reftyped_vregs: vec![],
-            constants,
-            debug_value_labels: vec![],
-            vreg_aliases: FxHashMap::with_capacity_and_hasher(10 * n_blocks, Default::default()),
-            facts: vec![],
-        }
-    }
-
-    /// Get the ABI-dependent MachineEnv for managing register allocation.
-    pub fn machine_env(&self) -> &MachineEnv {
-        self.abi.machine_env(&self.sigs)
-    }
-
-    /// Get the number of blocks. Block indices will be in the range `0 ..
-    /// (self.num_blocks() - 1)`.
-    pub fn num_blocks(&self) -> usize {
-        self.block_ranges.len()
-    }
-
-    /// The number of lowered instructions.
-    pub fn num_insts(&self) -> usize {
-        self.insts.len()
-    }
-
-    /// Get the successors for a block.
-    pub fn succs(&self, block: BlockIndex) -> &[BlockIndex] {
-        let (start, end) = self.block_succ_range[block.index()];
-        &self.block_succs_preds[start as usize..end as usize]
-    }
-
-    fn compute_clobbers(&self, regalloc: &regalloc2::Output) -> Vec<Writable<RealReg>> {
-        // Compute clobbered registers.
-        let mut clobbered = vec![];
-        let mut clobbered_set = FxHashSet::default();
-
-        // All moves are included in clobbers.
-        for edit in &regalloc.edits {
-            let Edit::Move { to, .. } = edit.1;
-            if let Some(preg) = to.as_reg() {
-                let reg = RealReg::from(preg);
-                if clobbered_set.insert(reg) {
-                    clobbered.push(Writable::from_reg(reg));
-                }
-            }
-        }
-
-        for (i, (start, end)) in self.operand_ranges.iter().enumerate() {
-            // Skip this instruction if not "included in clobbers" as
-            // per the MachInst. (Some backends use this to implement
-            // ABI specifics; e.g., excluding calls of the same ABI as
-            // the current function from clobbers, because by
-            // definition everything clobbered by the call can be
-            // clobbered by this function without saving as well.)
-            if !self.insts[i].is_included_in_clobbers() {
-                continue;
-            }
-
-            let start = *start as usize;
-            let end = *end as usize;
-            let operands = &self.operands[start..end];
-            let allocs = &regalloc.allocs[start..end];
-            for (operand, alloc) in operands.iter().zip(allocs.iter()) {
-                // We're interested only in writes (Mods or Defs).
-                if operand.kind() == OperandKind::Use {
-                    continue;
-                }
-                if let Some(preg) = alloc.as_reg() {
-                    let reg = RealReg::from(preg);
-                    if clobbered_set.insert(reg) {
-                        clobbered.push(Writable::from_reg(reg));
-                    }
-                }
-            }
-
-            // Also add explicitly-clobbered registers.
-            for preg in self
-                .clobbers
-                .get(&InsnIndex::new(i))
-                .cloned()
-                .unwrap_or_default()
-            {
-                let reg = RealReg::from(preg);
-                if clobbered_set.insert(reg) {
-                    clobbered.push(Writable::from_reg(reg));
-                }
-            }
-        }
-
-        clobbered
-    }
-
-    /// Emit the instructions to a `MachBuffer`, containing fixed-up
-    /// code and external reloc/trap/etc. records ready for use. Takes
-    /// the regalloc results as well.
-    ///
-    /// Returns the machine code itself, and optionally metadata
-    /// and/or a disassembly, as an `EmitResult`. The `VCode` itself
-    /// is consumed by the emission process.
-    pub fn emit(
-        mut self,
-        regalloc: &regalloc2::Output,
-        want_disasm: bool,
-        flags: &settings::Flags,
-        ctrl_plane: &mut ControlPlane,
-    ) -> EmitResult
-    where
-        I: VCodeInst,
-    {
-        // To write into disasm string.
-        use core::fmt::Write;
-
-        let _tt = timing::vcode_emit();
-        let mut buffer = MachBuffer::new();
-        let mut bb_starts: Vec<Option<CodeOffset>> = vec![];
-
-        // The first M MachLabels are reserved for block indices.
-        buffer.reserve_labels_for_blocks(self.num_blocks());
-
-        // Register all allocated constants with the `MachBuffer` to ensure that
-        // any references to the constants during instructions can be handled
-        // correctly.
-        buffer.register_constants(&self.constants);
-
-        // Construct the final order we emit code in: cold blocks at the end.
-        let mut final_order: SmallVec<[BlockIndex; 16]> = smallvec![];
-        let mut cold_blocks: SmallVec<[BlockIndex; 16]> = smallvec![];
-        for block in 0..self.num_blocks() {
-            let block = BlockIndex::new(block);
-            if self.block_order.is_cold(block) {
-                cold_blocks.push(block);
-            } else {
-                final_order.push(block);
-            }
-        }
-        final_order.extend(cold_blocks.clone());
-
-        // Compute/save info we need for the prologue: clobbers and
-        // number of spillslots.
-        //
-        // We clone `abi` here because we will mutate it as we
-        // generate the prologue and set other info, but we can't
-        // mutate `VCode`. The info it usually carries prior to
-        // setting clobbers is fairly minimal so this should be
-        // relatively cheap.
-        let clobbers = self.compute_clobbers(regalloc);
-        self.abi.set_num_spillslots(regalloc.num_spillslots);
-        self.abi.set_clobbered(clobbers);
-        self.abi.compute_frame_layout(&self.sigs);
-
-        // Emit blocks.
-        let mut cur_srcloc = None;
-        let mut last_offset = None;
-        let mut inst_offsets = vec![];
-        let mut state = I::State::new(&self.abi, std::mem::take(ctrl_plane));
-
-        let mut disasm = String::new();
-
-        if !self.debug_value_labels.is_empty() {
-            inst_offsets.resize(self.insts.len(), NO_INST_OFFSET);
-        }
-
-        // Count edits per block ahead of time; this is needed for
-        // lookahead island emission. (We could derive it per-block
-        // with binary search in the edit list, but it's more
-        // efficient to do it in one pass here.)
-        let mut ra_edits_per_block: SmallVec<[u32; 64]> = smallvec![];
-        let mut edit_idx = 0;
-        for block in 0..self.num_blocks() {
-            let end_inst = self.block_ranges[block].1;
-            let start_edit_idx = edit_idx;
-            while edit_idx < regalloc.edits.len() && regalloc.edits[edit_idx].0.inst() < end_inst {
-                edit_idx += 1;
-            }
-            let end_edit_idx = edit_idx;
-            ra_edits_per_block.push((end_edit_idx - start_edit_idx) as u32);
-        }
-
-        let is_forward_edge_cfi_enabled = self.abi.is_forward_edge_cfi_enabled();
-        let mut bb_padding = match flags.bb_padding_log2_minus_one() {
-            0 => Vec::new(),
-            n => vec![0; 1 << (n - 1)],
-        };
-        let mut total_bb_padding = 0;
-
-        for (block_order_idx, &block) in final_order.iter().enumerate() {
-            trace!("emitting block {:?}", block);
-
-            // Call the new block hook for state
-            state.on_new_block();
-
-            // Emit NOPs to align the block.
-            let new_offset = I::align_basic_block(buffer.cur_offset());
-            while new_offset > buffer.cur_offset() {
-                // Pad with NOPs up to the aligned block offset.
-                let nop = I::gen_nop((new_offset - buffer.cur_offset()) as usize);
-                nop.emit(&[], &mut buffer, &self.emit_info, &mut Default::default());
-            }
-            assert_eq!(buffer.cur_offset(), new_offset);
-
-            let do_emit = |inst: &I,
-                           allocs: &[Allocation],
-                           disasm: &mut String,
-                           buffer: &mut MachBuffer<I>,
-                           state: &mut I::State| {
-                if want_disasm && !inst.is_args() {
-                    let mut s = state.clone();
-                    writeln!(disasm, "  {}", inst.pretty_print_inst(allocs, &mut s)).unwrap();
-                }
-                inst.emit(allocs, buffer, &self.emit_info, state);
-            };
-
-            // Is this the first block? Emit the prologue directly if so.
-            if block == self.entry {
-                trace!(" -> entry block");
-                buffer.start_srcloc(Default::default());
-                state.pre_sourceloc(Default::default());
-                for inst in &self.abi.gen_prologue() {
-                    do_emit(&inst, &[], &mut disasm, &mut buffer, &mut state);
-                }
-                buffer.end_srcloc();
-            }
-
-            // Now emit the regular block body.
-
-            buffer.bind_label(MachLabel::from_block(block), state.ctrl_plane_mut());
-
-            if want_disasm {
-                writeln!(&mut disasm, "block{}:", block.index()).unwrap();
-            }
-
-            if flags.machine_code_cfg_info() {
-                // Track BB starts. If we have backed up due to MachBuffer
-                // branch opts, note that the removed blocks were removed.
-                let cur_offset = buffer.cur_offset();
-                if last_offset.is_some() && cur_offset <= last_offset.unwrap() {
-                    for i in (0..bb_starts.len()).rev() {
-                        if bb_starts[i].is_some() && cur_offset > bb_starts[i].unwrap() {
-                            break;
-                        }
-                        bb_starts[i] = None;
-                    }
-                }
-                bb_starts.push(Some(cur_offset));
-                last_offset = Some(cur_offset);
-            }
-
-            if let Some(block_start) = I::gen_block_start(
-                self.block_order.is_indirect_branch_target(block),
-                is_forward_edge_cfi_enabled,
-            ) {
-                do_emit(&block_start, &[], &mut disasm, &mut buffer, &mut state);
-            }
-
-            for inst_or_edit in regalloc.block_insts_and_edits(&self, block) {
-                match inst_or_edit {
-                    InstOrEdit::Inst(iix) => {
-                        if !self.debug_value_labels.is_empty() {
-                            // If we need to produce debug info,
-                            // record the offset of each instruction
-                            // so that we can translate value-label
-                            // ranges to machine-code offsets.
-
-                            // Cold blocks violate monotonicity
-                            // assumptions elsewhere (that
-                            // instructions in inst-index order are in
-                            // order in machine code), so we omit
-                            // their offsets here. Value-label range
-                            // generation below will skip empty ranges
-                            // and ranges with to-offsets of zero.
-                            if !self.block_order.is_cold(block) {
-                                inst_offsets[iix.index()] = buffer.cur_offset();
-                            }
-                        }
-
-                        // Update the srcloc at this point in the buffer.
-                        let srcloc = self.srclocs[iix.index()];
-                        if cur_srcloc != Some(srcloc) {
-                            if cur_srcloc.is_some() {
-                                buffer.end_srcloc();
-                            }
-                            buffer.start_srcloc(srcloc);
-                            cur_srcloc = Some(srcloc);
-                        }
-                        state.pre_sourceloc(cur_srcloc.unwrap_or_default());
-
-                        // If this is a safepoint, compute a stack map
-                        // and pass it to the emit state.
-                        if self.insts[iix.index()].is_safepoint() {
-                            let mut safepoint_slots: SmallVec<[SpillSlot; 8]> = smallvec![];
-                            // Find the contiguous range of
-                            // (progpoint, allocation) safepoint slot
-                            // records in `regalloc.safepoint_slots`
-                            // for this instruction index.
-                            let safepoint_slots_start = regalloc
-                                .safepoint_slots
-                                .binary_search_by(|(progpoint, _alloc)| {
-                                    if progpoint.inst() >= iix {
-                                        std::cmp::Ordering::Greater
-                                    } else {
-                                        std::cmp::Ordering::Less
-                                    }
-                                })
-                                .unwrap_err();
-
-                            for (_, alloc) in regalloc.safepoint_slots[safepoint_slots_start..]
-                                .iter()
-                                .take_while(|(progpoint, _)| progpoint.inst() == iix)
-                            {
-                                let slot = alloc.as_stack().unwrap();
-                                safepoint_slots.push(slot);
-                            }
-                            if !safepoint_slots.is_empty() {
-                                let stack_map = self
-                                    .abi
-                                    .spillslots_to_stack_map(&safepoint_slots[..], &state);
-                                state.pre_safepoint(stack_map);
-                            }
-                        }
-
-                        // Get the allocations for this inst from the regalloc result.
-                        let allocs = regalloc.inst_allocs(iix);
-
-                        // If the instruction we are about to emit is
-                        // a return, place an epilogue at this point
-                        // (and don't emit the return; the actual
-                        // epilogue will contain it).
-                        if self.insts[iix.index()].is_term() == MachTerminator::Ret {
-                            for inst in self.abi.gen_epilogue() {
-                                do_emit(&inst, &[], &mut disasm, &mut buffer, &mut state);
-                            }
-                        } else {
-                            // Emit the instruction!
-                            do_emit(
-                                &self.insts[iix.index()],
-                                allocs,
-                                &mut disasm,
-                                &mut buffer,
-                                &mut state,
-                            );
-                        }
-                    }
-
-                    InstOrEdit::Edit(Edit::Move { from, to }) => {
-                        // Create a move/spill/reload instruction and
-                        // immediately emit it.
-                        match (from.as_reg(), to.as_reg()) {
-                            (Some(from), Some(to)) => {
-                                // Reg-to-reg move.
-                                let from_rreg = Reg::from(from);
-                                let to_rreg = Writable::from_reg(Reg::from(to));
-                                debug_assert_eq!(from.class(), to.class());
-                                let ty = I::canonical_type_for_rc(from.class());
-                                let mv = I::gen_move(to_rreg, from_rreg, ty);
-                                do_emit(&mv, &[], &mut disasm, &mut buffer, &mut state);
-                            }
-                            (Some(from), None) => {
-                                // Spill from register to spillslot.
-                                let to = to.as_stack().unwrap();
-                                let from_rreg = RealReg::from(from);
-                                let spill = self.abi.gen_spill(to, from_rreg);
-                                do_emit(&spill, &[], &mut disasm, &mut buffer, &mut state);
-                            }
-                            (None, Some(to)) => {
-                                // Load from spillslot to register.
-                                let from = from.as_stack().unwrap();
-                                let to_rreg = Writable::from_reg(RealReg::from(to));
-                                let reload = self.abi.gen_reload(to_rreg, from);
-                                do_emit(&reload, &[], &mut disasm, &mut buffer, &mut state);
-                            }
-                            (None, None) => {
-                                panic!("regalloc2 should have eliminated stack-to-stack moves!");
-                            }
-                        }
-                    }
-                }
-            }
-
-            if cur_srcloc.is_some() {
-                buffer.end_srcloc();
-                cur_srcloc = None;
-            }
-
-            // Do we need an island? Get the worst-case size of the next BB, add
-            // it to the optional padding behind the block, and pass this to the
-            // `MachBuffer` to determine if an island is necessary.
-            let worst_case_next_bb = if block_order_idx < final_order.len() - 1 {
-                let next_block = final_order[block_order_idx + 1];
-                let next_block_range = self.block_ranges[next_block.index()];
-                let next_block_size =
-                    (next_block_range.1.index() - next_block_range.0.index()) as u32;
-                let next_block_ra_insertions = ra_edits_per_block[next_block.index()];
-                I::worst_case_size() * (next_block_size + next_block_ra_insertions)
-            } else {
-                0
-            };
-            let padding = if bb_padding.is_empty() {
-                0
-            } else {
-                bb_padding.len() as u32 + I::LabelUse::ALIGN - 1
-            };
-            if buffer.island_needed(padding + worst_case_next_bb) {
-                buffer.emit_island(padding + worst_case_next_bb, ctrl_plane);
-            }
-
-            // Insert padding, if configured, to stress the `MachBuffer`'s
-            // relocation and island calculations.
-            //
-            // Padding can get quite large during fuzzing though so place a
-            // total cap on it where when a per-function threshold is exceeded
-            // the padding is turned back down to zero. This avoids a small-ish
-            // test case generating a GB+ memory footprint in Cranelift for
-            // example.
-            if !bb_padding.is_empty() {
-                buffer.put_data(&bb_padding);
-                buffer.align_to(I::LabelUse::ALIGN);
-                total_bb_padding += bb_padding.len();
-                if total_bb_padding > (150 << 20) {
-                    bb_padding = Vec::new();
-                }
-            }
-        }
-
-        // Do any optimizations on branches at tail of buffer, as if we had
-        // bound one last label.
-        buffer.optimize_branches(ctrl_plane);
-
-        // emission state is not needed anymore, move control plane back out
-        *ctrl_plane = state.take_ctrl_plane();
-
-        let func_body_len = buffer.cur_offset();
-
-        // Create `bb_edges` and final (filtered) `bb_starts`.
-        let mut bb_edges = vec![];
-        let mut bb_offsets = vec![];
-        if flags.machine_code_cfg_info() {
-            for block in 0..self.num_blocks() {
-                if bb_starts[block].is_none() {
-                    // Block was deleted by MachBuffer; skip.
-                    continue;
-                }
-                let from = bb_starts[block].unwrap();
-
-                bb_offsets.push(from);
-                // Resolve each `succ` label and add edges.
-                let succs = self.block_succs(BlockIndex::new(block));
-                for &succ in succs.iter() {
-                    let to = buffer.resolve_label_offset(MachLabel::from_block(succ));
-                    bb_edges.push((from, to));
-                }
-            }
-        }
-
-        self.monotonize_inst_offsets(&mut inst_offsets[..], func_body_len);
-        let value_labels_ranges =
-            self.compute_value_labels_ranges(regalloc, &inst_offsets[..], func_body_len);
-        let frame_size = self.abi.frame_size();
-
-        EmitResult {
-            buffer: buffer.finish(&self.constants, ctrl_plane),
-            bb_offsets,
-            bb_edges,
-            func_body_len,
-            disasm: if want_disasm { Some(disasm) } else { None },
-            sized_stackslot_offsets: self.abi.sized_stackslot_offsets().clone(),
-            dynamic_stackslot_offsets: self.abi.dynamic_stackslot_offsets().clone(),
-            value_labels_ranges,
-            frame_size,
-        }
-    }
-
-    fn monotonize_inst_offsets(&self, inst_offsets: &mut [CodeOffset], func_body_len: u32) {
-        if self.debug_value_labels.is_empty() {
-            return;
-        }
-
-        // During emission, branch removal can make offsets of instructions incorrect.
-        // Consider the following sequence: [insi][jmp0][jmp1][jmp2][insj]
-        // It will be recorded as (say):    [30]  [34]  [38]  [42]  [<would be 46>]
-        // When the jumps get removed we are left with (in "inst_offsets"):
-        // [insi][jmp0][jmp1][jmp2][insj][...]
-        // [30]  [34]  [38]  [42]  [34]
-        // Which violates the monotonicity invariant. This method sets offsets of these
-        // removed instructions such as to make them appear zero-sized:
-        // [insi][jmp0][jmp1][jmp2][insj][...]
-        // [30]  [34]  [34]  [34]  [34]
-        //
-        let mut next_offset = func_body_len;
-        for inst_index in (0..(inst_offsets.len() - 1)).rev() {
-            let inst_offset = inst_offsets[inst_index];
-
-            // Not all instructions get their offsets recorded.
-            if inst_offset == NO_INST_OFFSET {
-                continue;
-            }
-
-            if inst_offset > next_offset {
-                trace!(
-                    "Fixing code offset of the removed Inst {}: {} -> {}",
-                    inst_index,
-                    inst_offset,
-                    next_offset
-                );
-                inst_offsets[inst_index] = next_offset;
-                continue;
-            }
-
-            next_offset = inst_offset;
-        }
-    }
-
-    fn compute_value_labels_ranges(
-        &self,
-        regalloc: &regalloc2::Output,
-        inst_offsets: &[CodeOffset],
-        func_body_len: u32,
-    ) -> ValueLabelsRanges {
-        if self.debug_value_labels.is_empty() {
-            return ValueLabelsRanges::default();
-        }
-
-        let mut value_labels_ranges: ValueLabelsRanges = HashMap::new();
-        for &(label, from, to, alloc) in &regalloc.debug_locations {
-            let ranges = value_labels_ranges
-                .entry(ValueLabel::from_u32(label))
-                .or_insert_with(|| vec![]);
-            let from_offset = inst_offsets[from.inst().index()];
-            let to_offset = if to.inst().index() == inst_offsets.len() {
-                func_body_len
-            } else {
-                inst_offsets[to.inst().index()]
-            };
-
-            // Empty ranges or unavailable offsets can happen
-            // due to cold blocks and branch removal (see above).
-            if from_offset == NO_INST_OFFSET
-                || to_offset == NO_INST_OFFSET
-                || from_offset == to_offset
-            {
-                continue;
-            }
-
-            let loc = if let Some(preg) = alloc.as_reg() {
-                LabelValueLoc::Reg(Reg::from(preg))
-            } else {
-                let slot = alloc.as_stack().unwrap();
-                let sp_offset = self.abi.get_spillslot_offset(slot);
-                let sp_to_caller_sp_offset = self.abi.nominal_sp_to_caller_sp_offset();
-                let caller_sp_to_cfa_offset =
-                    crate::isa::unwind::systemv::caller_sp_to_cfa_offset();
-                let cfa_to_sp_offset = -((sp_to_caller_sp_offset + caller_sp_to_cfa_offset) as i64);
-                LabelValueLoc::CFAOffset(cfa_to_sp_offset + sp_offset)
-            };
-
-            // ValueLocRanges are recorded by *instruction-end
-            // offset*. `from_offset` is the *start* of the
-            // instruction; that is the same as the end of another
-            // instruction, so we only want to begin coverage once
-            // we are past the previous instruction's end.
-            let start = from_offset + 1;
-
-            // Likewise, `end` is exclusive, but we want to
-            // *include* the end of the last
-            // instruction. `to_offset` is the start of the
-            // `to`-instruction, which is the exclusive end, i.e.,
-            // the first instruction not covered. That
-            // instruction's start is the same as the end of the
-            // last instruction that is included, so we go one
-            // byte further to be sure to include it.
-            let end = to_offset + 1;
-
-            // Coalesce adjacent ranges that for the same location
-            // to minimize output size here and for the consumers.
-            if let Some(last_loc_range) = ranges.last_mut() {
-                if last_loc_range.loc == loc && last_loc_range.end == start {
-                    trace!(
-                        "Extending debug range for VL{} in {:?} to {}",
-                        label,
-                        loc,
-                        end
-                    );
-                    last_loc_range.end = end;
-                    continue;
-                }
-            }
-
-            trace!(
-                "Recording debug range for VL{} in {:?}: [Inst {}..Inst {}) [{}..{})",
-                label,
-                loc,
-                from.inst().index(),
-                to.inst().index(),
-                start,
-                end
-            );
-
-            ranges.push(ValueLocRange { loc, start, end });
-        }
-
-        value_labels_ranges
-    }
-
-    /// Get the IR block for a BlockIndex, if one exists.
-    pub fn bindex_to_bb(&self, block: BlockIndex) -> Option<ir::Block> {
-        self.block_order.lowered_order()[block.index()].orig_block()
-    }
-
-    pub fn resolve_vreg_alias(&self, from: regalloc2::VReg) -> regalloc2::VReg {
-        Self::resolve_vreg_alias_impl(&self.vreg_aliases, from)
-    }
-
-    /// Implementation of alias resolution. Separate helper that does
-    /// not borrow `self` in order to allow working around borrowing
-    /// restrictions.
-    fn resolve_vreg_alias_impl(
-        aliases: &FxHashMap<regalloc2::VReg, regalloc2::VReg>,
-        from: regalloc2::VReg,
-    ) -> regalloc2::VReg {
-        // We prevent cycles from existing by resolving targets of
-        // aliases eagerly before setting them. If the target resolves
-        // to the origin of the alias, then a cycle would be created
-        // and the alias is disallowed. Because of the structure of
-        // SSA code (one instruction can refer to another's defs but
-        // not vice-versa, except indirectly through
-        // phis/blockparams), cycles should not occur as we use
-        // aliases to redirect vregs to the temps that actually define
-        // them.
-
-        let mut vreg = from;
-        while let Some(to) = aliases.get(&vreg) {
-            vreg = *to;
-        }
-        vreg
-    }
-
-    #[inline]
-    fn assert_no_vreg_aliases<'a>(&self, list: &'a [VReg]) -> &'a [VReg] {
-        for vreg in list {
-            self.assert_not_vreg_alias(*vreg);
-        }
-        list
-    }
-
-    #[inline]
-    fn assert_not_vreg_alias(&self, vreg: VReg) -> VReg {
-        debug_assert!(self.resolve_vreg_alias(vreg) == vreg);
-        vreg
-    }
-
-    #[inline]
-    fn assert_operand_not_vreg_alias(&self, op: Operand) -> Operand {
-        // It should be true by construction that `Operand`s do not contain any
-        // aliased vregs since they're all collected and mapped when the VCode
-        // is itself constructed.
-        self.assert_not_vreg_alias(op.vreg());
-        op
-    }
-
-    /// Get the type of a VReg.
-    pub fn vreg_type(&self, vreg: VReg) -> Type {
-        self.vreg_types[vreg.vreg()]
-    }
-
-    /// Get the fact, if any, for a given VReg.
-    pub fn vreg_fact(&self, vreg: VReg) -> Option<&Fact> {
-        let vreg = self.resolve_vreg_alias(vreg);
-        self.facts[vreg.vreg()].as_ref()
-    }
-
-    /// Set the fact for a given VReg.
-    pub fn set_vreg_fact(&mut self, vreg: VReg, fact: Fact) {
-        let vreg = self.resolve_vreg_alias(vreg);
-        trace!("set fact on {}: {:?}", vreg, fact);
-        self.facts[vreg.vreg()] = Some(fact);
-    }
-
-    /// Does a given instruction define any facts?
-    pub fn inst_defines_facts(&self, inst: InsnIndex) -> bool {
-        self.inst_operands(inst)
-            .iter()
-            .filter(|o| o.kind() == OperandKind::Def)
-            .map(|o| o.vreg())
-            .any(|vreg| self.facts[vreg.vreg()].is_some())
-    }
-}
-
-impl<I: VCodeInst> std::ops::Index<InsnIndex> for VCode<I> {
-    type Output = I;
-    fn index(&self, idx: InsnIndex) -> &Self::Output {
-        &self.insts[idx.index()]
-    }
-}
-
-impl<I: VCodeInst> RegallocFunction for VCode<I> {
-    fn num_insts(&self) -> usize {
-        self.insts.len()
-    }
-
-    fn num_blocks(&self) -> usize {
-        self.block_ranges.len()
-    }
-
-    fn entry_block(&self) -> BlockIndex {
-        self.entry
-    }
-
-    fn block_insns(&self, block: BlockIndex) -> InstRange {
-        let (start, end) = self.block_ranges[block.index()];
-        InstRange::forward(start, end)
-    }
-
-    fn block_succs(&self, block: BlockIndex) -> &[BlockIndex] {
-        let (start, end) = self.block_succ_range[block.index()];
-        &self.block_succs_preds[start as usize..end as usize]
-    }
-
-    fn block_preds(&self, block: BlockIndex) -> &[BlockIndex] {
-        let (start, end) = self.block_pred_range[block.index()];
-        &self.block_succs_preds[start as usize..end as usize]
-    }
-
-    fn block_params(&self, block: BlockIndex) -> &[VReg] {
-        // As a special case we don't return block params for the entry block, as all the arguments
-        // will be defined by the `Inst::Args` instruction.
-        if block == self.entry {
-            return &[];
-        }
-
-        let (start, end) = self.block_params_range[block.index()];
-        let ret = &self.block_params[start as usize..end as usize];
-        // Currently block params are never aliased to another vreg, but
-        // double-check just to be sure.
-        self.assert_no_vreg_aliases(ret)
-    }
-
-    fn branch_blockparams(&self, block: BlockIndex, _insn: InsnIndex, succ_idx: usize) -> &[VReg] {
-        let (succ_range_start, succ_range_end) = self.branch_block_arg_succ_range[block.index()];
-        let succ_ranges =
-            &self.branch_block_arg_range[succ_range_start as usize..succ_range_end as usize];
-        let (branch_block_args_start, branch_block_args_end) = succ_ranges[succ_idx];
-        let ret = &self.branch_block_args
-            [branch_block_args_start as usize..branch_block_args_end as usize];
-        self.assert_no_vreg_aliases(ret)
-    }
-
-    fn is_ret(&self, insn: InsnIndex) -> bool {
-        match self.insts[insn.index()].is_term() {
-            // We treat blocks terminated by an unconditional trap like a return for regalloc.
-            MachTerminator::None => self.insts[insn.index()].is_trap(),
-            MachTerminator::Ret | MachTerminator::RetCall => true,
-            MachTerminator::Uncond | MachTerminator::Cond | MachTerminator::Indirect => false,
-        }
-    }
-
-    fn is_branch(&self, insn: InsnIndex) -> bool {
-        match self.insts[insn.index()].is_term() {
-            MachTerminator::Cond | MachTerminator::Uncond | MachTerminator::Indirect => true,
-            _ => false,
-        }
-    }
-
-    fn requires_refs_on_stack(&self, insn: InsnIndex) -> bool {
-        self.insts[insn.index()].is_safepoint()
-    }
-
-    fn inst_operands(&self, insn: InsnIndex) -> &[Operand] {
-        let (start, end) = self.operand_ranges[insn.index()];
-        let ret = &self.operands[start as usize..end as usize];
-        for op in ret {
-            self.assert_operand_not_vreg_alias(*op);
-        }
-        ret
-    }
-
-    fn inst_clobbers(&self, insn: InsnIndex) -> PRegSet {
-        self.clobbers.get(&insn).cloned().unwrap_or_default()
-    }
-
-    fn num_vregs(&self) -> usize {
-        std::cmp::max(self.vreg_types.len(), first_user_vreg_index())
-    }
-
-    fn reftype_vregs(&self) -> &[VReg] {
-        self.assert_no_vreg_aliases(&self.reftyped_vregs[..])
-    }
-
-    fn debug_value_labels(&self) -> &[(VReg, InsnIndex, InsnIndex, u32)] {
-        // VRegs here are inserted into `debug_value_labels` after code is
-        // generated and aliases are fully defined, so no double-check that
-        // aliases are not lingering.
-        for (vreg, ..) in self.debug_value_labels.iter() {
-            self.assert_not_vreg_alias(*vreg);
-        }
-        &self.debug_value_labels[..]
-    }
-
-    fn spillslot_size(&self, regclass: RegClass) -> usize {
-        self.abi.get_spillslot_size(regclass) as usize
-    }
-
-    fn allow_multiple_vreg_defs(&self) -> bool {
-        // At least the s390x backend requires this, because the
-        // `Loop` pseudo-instruction aggregates all Operands so pinned
-        // vregs (RealRegs) may occur more than once.
-        true
-    }
-}
-
-impl<I: VCodeInst> fmt::Debug for VCode<I> {
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        writeln!(f, "VCode {{")?;
-        writeln!(f, "  Entry block: {}", self.entry.index())?;
-
-        let mut state = Default::default();
-
-        let mut alias_keys = self.vreg_aliases.keys().cloned().collect::<Vec<_>>();
-        alias_keys.sort_unstable();
-        for key in alias_keys {
-            let dest = self.vreg_aliases.get(&key).unwrap();
-            writeln!(f, "  {:?} := {:?}", Reg::from(key), Reg::from(*dest))?;
-        }
-
-        for block in 0..self.num_blocks() {
-            let block = BlockIndex::new(block);
-            writeln!(f, "Block {}:", block.index())?;
-            if let Some(bb) = self.bindex_to_bb(block) {
-                writeln!(f, "    (original IR block: {})", bb)?;
-            }
-            for succ in self.succs(block) {
-                writeln!(f, "    (successor: Block {})", succ.index())?;
-            }
-            let (start, end) = self.block_ranges[block.index()];
-            writeln!(
-                f,
-                "    (instruction range: {} .. {})",
-                start.index(),
-                end.index()
-            )?;
-            for inst in start.index()..end.index() {
-                writeln!(
-                    f,
-                    "  Inst {}: {}",
-                    inst,
-                    self.insts[inst].pretty_print_inst(&[], &mut state)
-                )?;
-                for operand in self.inst_operands(InsnIndex::new(inst)) {
-                    if operand.kind() == OperandKind::Def {
-                        if let Some(fact) = &self.facts[operand.vreg().vreg()] {
-                            writeln!(f, "    v{} ! {}", operand.vreg().vreg(), fact)?;
-                        }
-                    }
-                }
-            }
-        }
-
-        writeln!(f, "}}")?;
-        Ok(())
-    }
-}
-
-/// This structure manages VReg allocation during the lifetime of the VCodeBuilder.
-pub struct VRegAllocator<I> {
-    /// Next virtual register number to allocate.
-    next_vreg: usize,
-
-    /// VReg IR-level types.
-    vreg_types: Vec<Type>,
-
-    /// A set with the same contents as `reftyped_vregs`, in order to
-    /// avoid inserting more than once.
-    reftyped_vregs_set: FxHashSet<VReg>,
-
-    /// Reference-typed `regalloc2::VReg`s. The regalloc requires
-    /// these in a dense slice (as opposed to querying the
-    /// reftype-status of each vreg) for efficient iteration.
-    reftyped_vregs: Vec<VReg>,
-
-    /// A deferred error, to be bubbled up to the top level of the
-    /// lowering algorithm. We take this approach because we cannot
-    /// currently propagate a `Result` upward through ISLE code (the
-    /// lowering rules) or some ABI code.
-    deferred_error: Option<CodegenError>,
-
-    /// Facts on VRegs, for proof-carrying code.
-    facts: Vec<Option<Fact>>,
-
-    /// The type of instruction that this allocator makes registers for.
-    _inst: core::marker::PhantomData<I>,
-}
-
-impl<I: VCodeInst> VRegAllocator<I> {
-    /// Make a new VRegAllocator.
-    pub fn new() -> Self {
-        Self {
-            next_vreg: first_user_vreg_index(),
-            vreg_types: vec![],
-            facts: vec![],
-            reftyped_vregs_set: FxHashSet::default(),
-            reftyped_vregs: vec![],
-            deferred_error: None,
-            _inst: core::marker::PhantomData::default(),
-        }
-    }
-
-    /// Allocate a fresh ValueRegs.
-    pub fn alloc(&mut self, ty: Type) -> CodegenResult<ValueRegs<Reg>> {
-        if self.deferred_error.is_some() {
-            return Err(CodegenError::CodeTooLarge);
-        }
-        let v = self.next_vreg;
-        let (regclasses, tys) = I::rc_for_type(ty)?;
-        self.next_vreg += regclasses.len();
-        if self.next_vreg >= VReg::MAX {
-            return Err(CodegenError::CodeTooLarge);
-        }
-
-        let regs: ValueRegs<Reg> = match regclasses {
-            &[rc0] => ValueRegs::one(VReg::new(v, rc0).into()),
-            &[rc0, rc1] => ValueRegs::two(VReg::new(v, rc0).into(), VReg::new(v + 1, rc1).into()),
-            // We can extend this if/when we support 32-bit targets; e.g.,
-            // an i128 on a 32-bit machine will need up to four machine regs
-            // for a `Value`.
-            _ => panic!("Value must reside in 1 or 2 registers"),
-        };
-        for (&reg_ty, &reg) in tys.iter().zip(regs.regs().iter()) {
-            self.set_vreg_type(reg.to_virtual_reg().unwrap(), reg_ty);
-        }
-
-        // Create empty facts for each allocated vreg.
-        self.facts
-            .resize(usize::try_from(self.next_vreg).unwrap(), None);
-
-        Ok(regs)
-    }
-
-    /// Allocate a fresh ValueRegs, deferring any out-of-vregs
-    /// errors. This is useful in places where we cannot bubble a
-    /// `CodegenResult` upward easily, and which are known to be
-    /// invoked from within the lowering loop that checks the deferred
-    /// error status below.
-    pub fn alloc_with_deferred_error(&mut self, ty: Type) -> ValueRegs<Reg> {
-        match self.alloc(ty) {
-            Ok(x) => x,
-            Err(e) => {
-                self.deferred_error = Some(e);
-                self.bogus_for_deferred_error(ty)
-            }
-        }
-    }
-
-    /// Take any deferred error that was accumulated by `alloc_with_deferred_error`.
-    pub fn take_deferred_error(&mut self) -> Option<CodegenError> {
-        self.deferred_error.take()
-    }
-
-    /// Produce an bogus VReg placeholder with the proper number of
-    /// registers for the given type. This is meant to be used with
-    /// deferred allocation errors (see `Lower::alloc_tmp()`).
-    fn bogus_for_deferred_error(&self, ty: Type) -> ValueRegs<Reg> {
-        let (regclasses, _tys) = I::rc_for_type(ty).expect("must have valid type");
-        match regclasses {
-            &[rc0] => ValueRegs::one(VReg::new(0, rc0).into()),
-            &[rc0, rc1] => ValueRegs::two(VReg::new(0, rc0).into(), VReg::new(1, rc1).into()),
-            _ => panic!("Value must reside in 1 or 2 registers"),
-        }
-    }
-
-    /// Set the type of this virtual register.
-    pub fn set_vreg_type(&mut self, vreg: VirtualReg, ty: Type) {
-        if self.vreg_types.len() <= vreg.index() {
-            self.vreg_types.resize(vreg.index() + 1, ir::types::INVALID);
-        }
-        self.vreg_types[vreg.index()] = ty;
-        if is_reftype(ty) {
-            let vreg: VReg = vreg.into();
-            if self.reftyped_vregs_set.insert(vreg) {
-                self.reftyped_vregs.push(vreg);
-            }
-        }
-    }
-
-    /// Set the proof-carrying code fact on a given virtual register.
-    ///
-    /// Returns the old fact, if any (only one fact can be stored).
-    pub fn set_fact(&mut self, vreg: VirtualReg, fact: Fact) -> Option<Fact> {
-        trace!("vreg {:?} has fact: {:?}", vreg, fact);
-        self.facts[vreg.index()].replace(fact)
-    }
-
-    /// Take (and remove) a fact about a VReg. Used when setting up
-    /// aliases: we want to move a fact from the alias vreg to the
-    /// aliased vreg, to preserve facts about a value that were stated
-    /// before we lowered its producer.
-    pub fn take_fact(&mut self, vreg: VirtualReg) -> Option<Fact> {
-        self.facts[vreg.index()].take()
-    }
-
-    /// Set a fact only if one doesn't already exist.
-    pub fn set_fact_if_missing(&mut self, vreg: VirtualReg, fact: Fact) {
-        if self.facts[vreg.index()].is_none() {
-            self.set_fact(vreg, fact);
-        }
-    }
-
-    /// Allocate a fresh ValueRegs, with a given fact to apply if
-    /// the value fits in one VReg.
-    pub fn alloc_with_maybe_fact(
-        &mut self,
-        ty: Type,
-        fact: Option<Fact>,
-    ) -> CodegenResult<ValueRegs<Reg>> {
-        let result = self.alloc(ty)?;
-
-        // Ensure that we don't lose a fact on a value that splits
-        // into multiple VRegs.
-        assert!(result.len() == 1 || fact.is_none());
-        if let Some(fact) = fact {
-            self.set_fact(result.regs()[0].to_virtual_reg().unwrap(), fact);
-        }
-
-        Ok(result)
-    }
-}
-
-/// This structure tracks the large constants used in VCode that will be emitted separately by the
-/// [MachBuffer].
-///
-/// First, during the lowering phase, constants are inserted using
-/// [VCodeConstants.insert]; an intermediate handle, [VCodeConstant], tracks what constants are
-/// used in this phase. Some deduplication is performed, when possible, as constant
-/// values are inserted.
-///
-/// Secondly, during the emission phase, the [MachBuffer] assigns [MachLabel]s for each of the
-/// constants so that instructions can refer to the value's memory location. The [MachBuffer]
-/// then writes the constant values to the buffer.
-#[derive(Default)]
-pub struct VCodeConstants {
-    constants: PrimaryMap<VCodeConstant, VCodeConstantData>,
-    pool_uses: HashMap<Constant, VCodeConstant>,
-    well_known_uses: HashMap<*const [u8], VCodeConstant>,
-    u64s: HashMap<[u8; 8], VCodeConstant>,
-}
-impl VCodeConstants {
-    /// Initialize the structure with the expected number of constants.
-    pub fn with_capacity(expected_num_constants: usize) -> Self {
-        Self {
-            constants: PrimaryMap::with_capacity(expected_num_constants),
-            pool_uses: HashMap::with_capacity(expected_num_constants),
-            well_known_uses: HashMap::new(),
-            u64s: HashMap::new(),
-        }
-    }
-
-    /// Insert a constant; using this method indicates that a constant value will be used and thus
-    /// will be emitted to the `MachBuffer`. The current implementation can deduplicate constants
-    /// that are [VCodeConstantData::Pool] or [VCodeConstantData::WellKnown] but not
-    /// [VCodeConstantData::Generated].
-    pub fn insert(&mut self, data: VCodeConstantData) -> VCodeConstant {
-        match data {
-            VCodeConstantData::Generated(_) => self.constants.push(data),
-            VCodeConstantData::Pool(constant, _) => match self.pool_uses.get(&constant) {
-                None => {
-                    let vcode_constant = self.constants.push(data);
-                    self.pool_uses.insert(constant, vcode_constant);
-                    vcode_constant
-                }
-                Some(&vcode_constant) => vcode_constant,
-            },
-            VCodeConstantData::WellKnown(data_ref) => {
-                match self.well_known_uses.entry(data_ref as *const [u8]) {
-                    Entry::Vacant(v) => {
-                        let vcode_constant = self.constants.push(data);
-                        v.insert(vcode_constant);
-                        vcode_constant
-                    }
-                    Entry::Occupied(o) => *o.get(),
-                }
-            }
-            VCodeConstantData::U64(value) => match self.u64s.entry(value) {
-                Entry::Vacant(v) => {
-                    let vcode_constant = self.constants.push(data);
-                    v.insert(vcode_constant);
-                    vcode_constant
-                }
-                Entry::Occupied(o) => *o.get(),
-            },
-        }
-    }
-
-    /// Return the number of constants inserted.
-    pub fn len(&self) -> usize {
-        self.constants.len()
-    }
-
-    /// Iterate over the [VCodeConstant] keys inserted in this structure.
-    pub fn keys(&self) -> Keys<VCodeConstant> {
-        self.constants.keys()
-    }
-
-    /// Iterate over the [VCodeConstant] keys and the data (as a byte slice) inserted in this
-    /// structure.
-    pub fn iter(&self) -> impl Iterator<Item = (VCodeConstant, &VCodeConstantData)> {
-        self.constants.iter()
-    }
-
-    /// Returns the data associated with the specified constant.
-    pub fn get(&self, c: VCodeConstant) -> &VCodeConstantData {
-        &self.constants[c]
-    }
-
-    /// Checks if the given [VCodeConstantData] is registered as
-    /// used by the pool.
-    pub fn pool_uses(&self, constant: &VCodeConstantData) -> bool {
-        match constant {
-            VCodeConstantData::Pool(c, _) => self.pool_uses.contains_key(c),
-            _ => false,
-        }
-    }
-}
-
-/// A use of a constant by one or more VCode instructions; see [VCodeConstants].
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub struct VCodeConstant(u32);
-entity_impl!(VCodeConstant);
-
-/// Identify the different types of constant that can be inserted into [VCodeConstants]. Tracking
-/// these separately instead of as raw byte buffers allows us to avoid some duplication.
-pub enum VCodeConstantData {
-    /// A constant already present in the Cranelift IR
-    /// [ConstantPool](crate::ir::constant::ConstantPool).
-    Pool(Constant, ConstantData),
-    /// A reference to a well-known constant value that is statically encoded within the compiler.
-    WellKnown(&'static [u8]),
-    /// A constant value generated during lowering; the value may depend on the instruction context
-    /// which makes it difficult to de-duplicate--if possible, use other variants.
-    Generated(ConstantData),
-    /// A constant of at most 64 bits. These are deduplicated as
-    /// well. Stored as a fixed-size array of `u8` so that we do not
-    /// encounter endianness problems when cross-compiling.
-    U64([u8; 8]),
-}
-impl VCodeConstantData {
-    /// Retrieve the constant data as a byte slice.
-    pub fn as_slice(&self) -> &[u8] {
-        match self {
-            VCodeConstantData::Pool(_, d) | VCodeConstantData::Generated(d) => d.as_slice(),
-            VCodeConstantData::WellKnown(d) => d,
-            VCodeConstantData::U64(value) => &value[..],
-        }
-    }
-
-    /// Calculate the alignment of the constant data.
-    pub fn alignment(&self) -> u32 {
-        if self.as_slice().len() <= 8 {
-            8
-        } else {
-            16
-        }
-    }
-}
-
-#[cfg(test)]
-mod test {
-    use super::*;
-    use std::mem::size_of;
-
-    #[test]
-    fn size_of_constant_structs() {
-        assert_eq!(size_of::<Constant>(), 4);
-        assert_eq!(size_of::<VCodeConstant>(), 4);
-        assert_eq!(size_of::<ConstantData>(), 24);
-        assert_eq!(size_of::<VCodeConstantData>(), 32);
-        assert_eq!(
-            size_of::<PrimaryMap<VCodeConstant, VCodeConstantData>>(),
-            24
-        );
-        // TODO The VCodeConstants structure's memory size could be further optimized.
-        // With certain versions of Rust, each `HashMap` in `VCodeConstants` occupied at
-        // least 48 bytes, making an empty `VCodeConstants` cost 120 bytes.
-    }
-}