wasmtime 19.0.2 → 20.0.0

data/ext/cargo-vendor/cranelift-codegen-0.106.2/src/machinst/abi.rs

@@ -1,2657 +0,0 @@
-//! Implementation of a vanilla ABI, shared between several machines. The
-//! implementation here assumes that arguments will be passed in registers
-//! first, then additional args on the stack; that the stack grows downward,
-//! contains a standard frame (return address and frame pointer), and the
-//! compiler is otherwise free to allocate space below that with its choice of
-//! layout; and that the machine has some notion of caller- and callee-save
-//! registers. Most modern machines, e.g. x86-64 and AArch64, should fit this
-//! mold and thus both of these backends use this shared implementation.
-//!
-//! See the documentation in specific machine backends for the "instantiation"
-//! of this generic ABI, i.e., which registers are caller/callee-save, arguments
-//! and return values, and any other special requirements.
-//!
-//! For now the implementation here assumes a 64-bit machine, but we intend to
-//! make this 32/64-bit-generic shortly.
-//!
-//! # Vanilla ABI
-//!
-//! First, arguments and return values are passed in registers up to a certain
-//! fixed count, after which they overflow onto the stack. Multiple return
-//! values either fit in registers, or are returned in a separate return-value
-//! area on the stack, given by a hidden extra parameter.
-//!
-//! Note that the exact stack layout is up to us. We settled on the
-//! below design based on several requirements. In particular, we need
-//! to be able to generate instructions (or instruction sequences) to
-//! access arguments, stack slots, and spill slots before we know how
-//! many spill slots or clobber-saves there will be, because of our
-//! pass structure. We also prefer positive offsets to negative
-//! offsets because of an asymmetry in some machines' addressing modes
-//! (e.g., on AArch64, positive offsets have a larger possible range
-//! without a long-form sequence to synthesize an arbitrary
-//! offset). We also need clobber-save registers to be "near" the
-//! frame pointer: Windows unwind information requires it to be within
-//! 240 bytes of RBP. Finally, it is not allowed to access memory
-//! below the current SP value.
-//!
-//! We assume that a prologue first pushes the frame pointer (and
-//! return address above that, if the machine does not do that in
-//! hardware). We set FP to point to this two-word frame record. We
-//! store all other frame slots below this two-word frame record, with
-//! the stack pointer remaining at or below this fixed frame storage
-//! for the rest of the function. We can then access frame storage
-//! slots using positive offsets from SP. In order to allow codegen
-//! for the latter before knowing how SP might be adjusted around
-//! callsites, we implement a "nominal SP" tracking feature by which a
-//! fixup (distance between actual SP and a "nominal" SP) is known at
-//! each instruction.
-//!
-//! Note that if we ever support dynamic stack-space allocation (for
-//! `alloca`), we will need a way to reference spill slots and stack
-//! slots without "nominal SP", because we will no longer be able to
-//! know a static offset from SP to the slots at any particular
-//! program point. Probably the best solution at that point will be to
-//! revert to using the frame pointer as the reference for all slots,
-//! and creating a "nominal FP" synthetic addressing mode (analogous
-//! to "nominal SP" today) to allow generating spill/reload and
-//! stackslot accesses before we know how large the clobber-saves will
-//! be.
-//!
-//! # Stack Layout
-//!
-//! The stack looks like:
-//!
-//! ```plain
-//!   (high address)
-//!
-//!                              +---------------------------+
-//!                              |          ...              |
-//!                              | stack args                |
-//!                              | (accessed via FP)         |
-//!                              +---------------------------+
-//! SP at function entry ----->  | return address            |
-//!                              +---------------------------+
-//! FP after prologue -------->  | FP (pushed by prologue)   |
-//!                              +---------------------------+
-//!                              |          ...              |
-//!                              | clobbered callee-saves    |
-//! unwind-frame base     ---->  | (pushed by prologue)      |
-//!                              +---------------------------+
-//!                              |          ...              |
-//!                              | spill slots               |
-//!                              | (accessed via nominal SP) |
-//!                              |          ...              |
-//!                              | stack slots               |
-//!                              | (accessed via nominal SP) |
-//! nominal SP --------------->  | (alloc'd by prologue)     |
-//! (SP at end of prologue)      +---------------------------+
-//!                              | [alignment as needed]     |
-//!                              |          ...              |
-//!                              | args for call             |
-//! SP before making a call -->  | (pushed at callsite)      |
-//!                              +---------------------------+
-//!
-//!   (low address)
-//! ```
-//!
-//! # Multi-value Returns
-//!
-//! We support multi-value returns by using multiple return-value
-//! registers. In some cases this is an extension of the base system
-//! ABI. See each platform's `abi.rs` implementation for details.
-
-use crate::entity::SecondaryMap;
-use crate::fx::FxHashMap;
-use crate::ir::types::*;
-use crate::ir::{ArgumentExtension, ArgumentPurpose, Signature};
-use crate::isa::TargetIsa;
-use crate::settings::ProbestackStrategy;
-use crate::CodegenError;
-use crate::{ir, isa};
-use crate::{machinst::*, trace};
-use regalloc2::{MachineEnv, PReg, PRegSet};
-use smallvec::smallvec;
-use std::collections::HashMap;
-use std::marker::PhantomData;
-use std::mem;
-
-/// A small vector of instructions (with some reasonable size); appropriate for
-/// a small fixed sequence implementing one operation.
-pub type SmallInstVec<I> = SmallVec<[I; 4]>;
-
-/// A type used by backends to track argument-binding info in the "args"
-/// pseudoinst. The pseudoinst holds a vec of `ArgPair` structs.
-#[derive(Clone, Debug)]
-pub struct ArgPair {
-    /// The vreg that is defined by this args pseudoinst.
-    pub vreg: Writable<Reg>,
-    /// The preg that the arg arrives in; this constrains the vreg's
-    /// placement at the pseudoinst.
-    pub preg: Reg,
-}
-
-/// A type used by backends to track return register binding info in the "ret"
-/// pseudoinst. The pseudoinst holds a vec of `RetPair` structs.
-#[derive(Clone, Debug)]
-pub struct RetPair {
-    /// The vreg that is returned by this pseudionst.
-    pub vreg: Reg,
-    /// The preg that the arg is returned through; this constrains the vreg's
-    /// placement at the pseudoinst.
-    pub preg: Reg,
-}
-
-/// A location for (part of) an argument or return value. These "storage slots"
-/// are specified for each register-sized part of an argument.
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum ABIArgSlot {
-    /// In a real register.
-    Reg {
-        /// Register that holds this arg.
-        reg: RealReg,
-        /// Value type of this arg.
-        ty: ir::Type,
-        /// Should this arg be zero- or sign-extended?
-        extension: ir::ArgumentExtension,
-    },
-    /// Arguments only: on stack, at given offset from SP at entry.
-    Stack {
-        /// Offset of this arg relative to the base of stack args.
-        offset: i64,
-        /// Value type of this arg.
-        ty: ir::Type,
-        /// Should this arg be zero- or sign-extended?
-        extension: ir::ArgumentExtension,
-    },
-}
-
-impl ABIArgSlot {
-    /// The type of the value that will be stored in this slot.
-    pub fn get_type(&self) -> ir::Type {
-        match self {
-            ABIArgSlot::Reg { ty, .. } => *ty,
-            ABIArgSlot::Stack { ty, .. } => *ty,
-        }
-    }
-}
-
-/// A vector of `ABIArgSlot`s. Inline capacity for one element because basically
-/// 100% of values use one slot. Only `i128`s need multiple slots, and they are
-/// super rare (and never happen with Wasm).
-pub type ABIArgSlotVec = SmallVec<[ABIArgSlot; 1]>;
-
-/// An ABIArg is composed of one or more parts. This allows for a CLIF-level
-/// Value to be passed with its parts in more than one location at the ABI
-/// level. For example, a 128-bit integer may be passed in two 64-bit registers,
-/// or even a 64-bit register and a 64-bit stack slot, on a 64-bit machine. The
-/// number of "parts" should correspond to the number of registers used to store
-/// this type according to the machine backend.
-///
-/// As an invariant, the `purpose` for every part must match. As a further
-/// invariant, a `StructArg` part cannot appear with any other part.
-#[derive(Clone, Debug)]
-pub enum ABIArg {
-    /// Storage slots (registers or stack locations) for each part of the
-    /// argument value. The number of slots must equal the number of register
-    /// parts used to store a value of this type.
-    Slots {
-        /// Slots, one per register part.
-        slots: ABIArgSlotVec,
-        /// Purpose of this arg.
-        purpose: ir::ArgumentPurpose,
-    },
-    /// Structure argument. We reserve stack space for it, but the CLIF-level
-    /// semantics are a little weird: the value passed to the call instruction,
-    /// and received in the corresponding block param, is a *pointer*. On the
-    /// caller side, we memcpy the data from the passed-in pointer to the stack
-    /// area; on the callee side, we compute a pointer to this stack area and
-    /// provide that as the argument's value.
-    StructArg {
-        /// Register or stack slot holding a pointer to the buffer as passed
-        /// by the caller to the callee.  If None, the ABI defines the buffer
-        /// to reside at a well-known location (i.e. at `offset` below).
-        pointer: Option<ABIArgSlot>,
-        /// Offset of this arg relative to base of stack args.
-        offset: i64,
-        /// Size of this arg on the stack.
-        size: u64,
-        /// Purpose of this arg.
-        purpose: ir::ArgumentPurpose,
-    },
-    /// Implicit argument. Similar to a StructArg, except that we have the
-    /// target type, not a pointer type, at the CLIF-level. This argument is
-    /// still being passed via reference implicitly.
-    ImplicitPtrArg {
-        /// Register or stack slot holding a pointer to the buffer.
-        pointer: ABIArgSlot,
-        /// Offset of the argument buffer.
-        offset: i64,
-        /// Type of the implicit argument.
-        ty: Type,
-        /// Purpose of this arg.
-        purpose: ir::ArgumentPurpose,
-    },
-}
-
-impl ABIArg {
-    /// Create an ABIArg from one register.
-    pub fn reg(
-        reg: RealReg,
-        ty: ir::Type,
-        extension: ir::ArgumentExtension,
-        purpose: ir::ArgumentPurpose,
-    ) -> ABIArg {
-        ABIArg::Slots {
-            slots: smallvec![ABIArgSlot::Reg { reg, ty, extension }],
-            purpose,
-        }
-    }
-
-    /// Create an ABIArg from one stack slot.
-    pub fn stack(
-        offset: i64,
-        ty: ir::Type,
-        extension: ir::ArgumentExtension,
-        purpose: ir::ArgumentPurpose,
-    ) -> ABIArg {
-        ABIArg::Slots {
-            slots: smallvec![ABIArgSlot::Stack {
-                offset,
-                ty,
-                extension,
-            }],
-            purpose,
-        }
-    }
-}
-
-/// Are we computing information about arguments or return values? Much of the
-/// handling is factored out into common routines; this enum allows us to
-/// distinguish which case we're handling.
-#[derive(Clone, Copy, Debug, PartialEq, Eq)]
-pub enum ArgsOrRets {
-    /// Arguments.
-    Args,
-    /// Return values.
-    Rets,
-}
-
-/// Abstract location for a machine-specific ABI impl to translate into the
-/// appropriate addressing mode.
-#[derive(Clone, Copy, Debug)]
-pub enum StackAMode {
-    /// Offset from the frame pointer, possibly making use of a specific type
-    /// for a scaled indexing operation.
-    FPOffset(i64, ir::Type),
-    /// Offset from the nominal stack pointer, possibly making use of a specific
-    /// type for a scaled indexing operation.
-    NominalSPOffset(i64, ir::Type),
-    /// Offset from the real stack pointer, possibly making use of a specific
-    /// type for a scaled indexing operation.
-    SPOffset(i64, ir::Type),
-}
-
-impl StackAMode {
-    /// Offset by an addend.
-    pub fn offset(self, addend: i64) -> Self {
-        match self {
-            StackAMode::FPOffset(off, ty) => StackAMode::FPOffset(off + addend, ty),
-            StackAMode::NominalSPOffset(off, ty) => StackAMode::NominalSPOffset(off + addend, ty),
-            StackAMode::SPOffset(off, ty) => StackAMode::SPOffset(off + addend, ty),
-        }
-    }
-}
-
-/// Trait implemented by machine-specific backend to represent ISA flags.
-pub trait IsaFlags: Clone {
-    /// Get a flag indicating whether forward-edge CFI is enabled.
-    fn is_forward_edge_cfi_enabled(&self) -> bool {
-        false
-    }
-}
-
-/// Used as an out-parameter to accumulate a sequence of `ABIArg`s in
-/// `ABIMachineSpec::compute_arg_locs`. Wraps the shared allocation for all
-/// `ABIArg`s in `SigSet` and exposes just the args for the current
-/// `compute_arg_locs` call.
-pub struct ArgsAccumulator<'a> {
-    sig_set_abi_args: &'a mut Vec<ABIArg>,
-    start: usize,
-    non_formal_flag: bool,
-}
-
-impl<'a> ArgsAccumulator<'a> {
-    fn new(sig_set_abi_args: &'a mut Vec<ABIArg>) -> Self {
-        let start = sig_set_abi_args.len();
-        ArgsAccumulator {
-            sig_set_abi_args,
-            start,
-            non_formal_flag: false,
-        }
-    }
-
-    #[inline]
-    pub fn push(&mut self, arg: ABIArg) {
-        debug_assert!(!self.non_formal_flag);
-        self.sig_set_abi_args.push(arg)
-    }
-
-    #[inline]
-    pub fn push_non_formal(&mut self, arg: ABIArg) {
-        self.non_formal_flag = true;
-        self.sig_set_abi_args.push(arg)
-    }
-
-    #[inline]
-    pub fn args(&self) -> &[ABIArg] {
-        &self.sig_set_abi_args[self.start..]
-    }
-
-    #[inline]
-    pub fn args_mut(&mut self) -> &mut [ABIArg] {
-        &mut self.sig_set_abi_args[self.start..]
-    }
-}
-
-/// Trait implemented by machine-specific backend to provide information about
-/// register assignments and to allow generating the specific instructions for
-/// stack loads/saves, prologues/epilogues, etc.
-pub trait ABIMachineSpec {
-    /// The instruction type.
-    type I: VCodeInst;
-
-    /// The ISA flags type.
-    type F: IsaFlags;
-
-    /// Returns the number of bits in a word, that is 32/64 for 32/64-bit architecture.
-    fn word_bits() -> u32;
-
-    /// Returns the number of bytes in a word.
-    fn word_bytes() -> u32 {
-        return Self::word_bits() / 8;
-    }
-
-    /// Returns word-size integer type.
-    fn word_type() -> Type {
-        match Self::word_bits() {
-            32 => I32,
-            64 => I64,
-            _ => unreachable!(),
-        }
-    }
-
-    /// Returns word register class.
-    fn word_reg_class() -> RegClass {
-        RegClass::Int
-    }
-
-    /// Returns required stack alignment in bytes.
-    fn stack_align(call_conv: isa::CallConv) -> u32;
-
-    /// Process a list of parameters or return values and allocate them to registers
-    /// and stack slots.
-    ///
-    /// The argument locations should be pushed onto the given `ArgsAccumulator`
-    /// in order. Any extra arguments added (such as return area pointers)
-    /// should come at the end of the list so that the first N lowered
-    /// parameters align with the N clif parameters.
-    ///
-    /// Returns the stack-space used (rounded up to as alignment requires), and
-    /// if `add_ret_area_ptr` was passed, the index of the extra synthetic arg
-    /// that was added.
-    fn compute_arg_locs<'a, I>(
-        call_conv: isa::CallConv,
-        flags: &settings::Flags,
-        params: I,
-        args_or_rets: ArgsOrRets,
-        add_ret_area_ptr: bool,
-        args: ArgsAccumulator<'_>,
-    ) -> CodegenResult<(u32, Option<usize>)>
-    where
-        I: IntoIterator<Item = &'a ir::AbiParam>;
-
-    /// Returns the offset from FP to the argument area, i.e., jumping over the saved FP, return
-    /// address, and maybe other standard elements depending on ABI (e.g. Wasm TLS reg).
-    fn fp_to_arg_offset(call_conv: isa::CallConv, flags: &settings::Flags) -> i64;
-
-    /// Generate a load from the stack.
-    fn gen_load_stack(mem: StackAMode, into_reg: Writable<Reg>, ty: Type) -> Self::I;
-
-    /// Generate a store to the stack.
-    fn gen_store_stack(mem: StackAMode, from_reg: Reg, ty: Type) -> Self::I;
-
-    /// Generate a move.
-    fn gen_move(to_reg: Writable<Reg>, from_reg: Reg, ty: Type) -> Self::I;
-
-    /// Generate an integer-extend operation.
-    fn gen_extend(
-        to_reg: Writable<Reg>,
-        from_reg: Reg,
-        is_signed: bool,
-        from_bits: u8,
-        to_bits: u8,
-    ) -> Self::I;
-
-    /// Generate an "args" pseudo-instruction to capture input args in
-    /// registers.
-    fn gen_args(args: Vec<ArgPair>) -> Self::I;
-
-    /// Generate a "rets" pseudo-instruction that moves vregs to return
-    /// registers.
-    fn gen_rets(rets: Vec<RetPair>) -> Self::I;
-
-    /// Generate an add-with-immediate. Note that even if this uses a scratch
-    /// register, it must satisfy two requirements:
-    ///
-    /// - The add-imm sequence must only clobber caller-save registers that are
-    ///   not used for arguments, because it will be placed in the prologue
-    ///   before the clobbered callee-save registers are saved.
-    ///
-    /// - The add-imm sequence must work correctly when `from_reg` and/or
-    ///   `into_reg` are the register returned by `get_stacklimit_reg()`.
-    fn gen_add_imm(
-        call_conv: isa::CallConv,
-        into_reg: Writable<Reg>,
-        from_reg: Reg,
-        imm: u32,
-    ) -> SmallInstVec<Self::I>;
-
-    /// Generate a sequence that traps with a `TrapCode::StackOverflow` code if
-    /// the stack pointer is less than the given limit register (assuming the
-    /// stack grows downward).
-    fn gen_stack_lower_bound_trap(limit_reg: Reg) -> SmallInstVec<Self::I>;
-
-    /// Generate an instruction to compute an address of a stack slot (FP- or
-    /// SP-based offset).
-    fn gen_get_stack_addr(mem: StackAMode, into_reg: Writable<Reg>, ty: Type) -> Self::I;
-
-    /// Get a fixed register to use to compute a stack limit. This is needed for
-    /// certain sequences generated after the register allocator has already
-    /// run. This must satisfy two requirements:
-    ///
-    /// - It must be a caller-save register that is not used for arguments,
-    ///   because it will be clobbered in the prologue before the clobbered
-    ///   callee-save registers are saved.
-    ///
-    /// - It must be safe to pass as an argument and/or destination to
-    ///   `gen_add_imm()`. This is relevant when an addition with a large
-    ///   immediate needs its own temporary; it cannot use the same fixed
-    ///   temporary as this one.
-    fn get_stacklimit_reg(call_conv: isa::CallConv) -> Reg;
-
-    /// Generate a load to the given [base+offset] address.
-    fn gen_load_base_offset(into_reg: Writable<Reg>, base: Reg, offset: i32, ty: Type) -> Self::I;
-
-    /// Generate a store from the given [base+offset] address.
-    fn gen_store_base_offset(base: Reg, offset: i32, from_reg: Reg, ty: Type) -> Self::I;
-
-    /// Adjust the stack pointer up or down.
-    fn gen_sp_reg_adjust(amount: i32) -> SmallInstVec<Self::I>;
-
-    /// Generate a meta-instruction that adjusts the nominal SP offset.
-    fn gen_nominal_sp_adj(amount: i32) -> Self::I;
-
-    /// Compute a FrameLayout structure containing a sorted list of all clobbered
-    /// registers that are callee-saved according to the ABI, as well as the sizes
-    /// of all parts of the stack frame.  The result is used to emit the prologue
-    /// and epilogue routines.
-    fn compute_frame_layout(
-        call_conv: isa::CallConv,
-        flags: &settings::Flags,
-        sig: &Signature,
-        regs: &[Writable<RealReg>],
-        is_leaf: bool,
-        stack_args_size: u32,
-        fixed_frame_storage_size: u32,
-        outgoing_args_size: u32,
-    ) -> FrameLayout;
-
-    /// Generate the usual frame-setup sequence for this architecture: e.g.,
-    /// `push rbp / mov rbp, rsp` on x86-64, or `stp fp, lr, [sp, #-16]!` on
-    /// AArch64.
-    fn gen_prologue_frame_setup(
-        call_conv: isa::CallConv,
-        flags: &settings::Flags,
-        isa_flags: &Self::F,
-        frame_layout: &FrameLayout,
-    ) -> SmallInstVec<Self::I>;
-
-    /// Generate the usual frame-restore sequence for this architecture.
-    /// This includes generating the actual return instruction(s).
-    fn gen_epilogue_frame_restore(
-        call_conv: isa::CallConv,
-        flags: &settings::Flags,
-        isa_flags: &Self::F,
-        frame_layout: &FrameLayout,
-    ) -> SmallInstVec<Self::I>;
-
-    /// Generate a probestack call.
-    fn gen_probestack(insts: &mut SmallInstVec<Self::I>, frame_size: u32);
-
-    /// Generate a inline stack probe.
-    fn gen_inline_probestack(
-        insts: &mut SmallInstVec<Self::I>,
-        call_conv: isa::CallConv,
-        frame_size: u32,
-        guard_size: u32,
-    );
-
-    /// Generate a clobber-save sequence. The implementation here should return
-    /// a sequence of instructions that "push" or otherwise save to the stack all
-    /// registers written/modified by the function body that are callee-saved.
-    /// The sequence of instructions should adjust the stack pointer downward,
-    /// and should align as necessary according to ABI requirements.
-    fn gen_clobber_save(
-        call_conv: isa::CallConv,
-        flags: &settings::Flags,
-        frame_layout: &FrameLayout,
-    ) -> SmallVec<[Self::I; 16]>;
-
-    /// Generate a clobber-restore sequence. This sequence should perform the
-    /// opposite of the clobber-save sequence generated above, assuming that SP
-    /// going into the sequence is at the same point that it was left when the
-    /// clobber-save sequence finished.
-    fn gen_clobber_restore(
-        call_conv: isa::CallConv,
-        flags: &settings::Flags,
-        frame_layout: &FrameLayout,
-    ) -> SmallVec<[Self::I; 16]>;
-
-    /// Generate a call instruction/sequence. This method is provided one
-    /// temporary register to use to synthesize the called address, if needed.
-    fn gen_call(
-        dest: &CallDest,
-        uses: CallArgList,
-        defs: CallRetList,
-        clobbers: PRegSet,
-        opcode: ir::Opcode,
-        tmp: Writable<Reg>,
-        callee_conv: isa::CallConv,
-        caller_conv: isa::CallConv,
-        callee_pop_size: u32,
-    ) -> SmallVec<[Self::I; 2]>;
-
-    /// Generate a memcpy invocation. Used to set up struct
-    /// args. Takes `src`, `dst` as read-only inputs and passes a temporary
-    /// allocator.
-    fn gen_memcpy<F: FnMut(Type) -> Writable<Reg>>(
-        call_conv: isa::CallConv,
-        dst: Reg,
-        src: Reg,
-        size: usize,
-        alloc_tmp: F,
-    ) -> SmallVec<[Self::I; 8]>;
-
-    /// Get the number of spillslots required for the given register-class.
-    fn get_number_of_spillslots_for_value(
-        rc: RegClass,
-        target_vector_bytes: u32,
-        isa_flags: &Self::F,
-    ) -> u32;
-
-    /// Get the current virtual-SP offset from an instruction-emission state.
-    fn get_virtual_sp_offset_from_state(s: &<Self::I as MachInstEmit>::State) -> i64;
-
-    /// Get the "nominal SP to FP" offset from an instruction-emission state.
-    fn get_nominal_sp_to_fp(s: &<Self::I as MachInstEmit>::State) -> i64;
-
-    /// Get the ABI-dependent MachineEnv for managing register allocation.
-    fn get_machine_env(flags: &settings::Flags, call_conv: isa::CallConv) -> &MachineEnv;
-
-    /// Get all caller-save registers, that is, registers that we expect
-    /// not to be saved across a call to a callee with the given ABI.
-    fn get_regs_clobbered_by_call(call_conv_of_callee: isa::CallConv) -> PRegSet;
-
-    /// Get the needed extension mode, given the mode attached to the argument
-    /// in the signature and the calling convention. The input (the attribute in
-    /// the signature) specifies what extension type should be done *if* the ABI
-    /// requires extension to the full register; this method's return value
-    /// indicates whether the extension actually *will* be done.
-    fn get_ext_mode(
-        call_conv: isa::CallConv,
-        specified: ir::ArgumentExtension,
-    ) -> ir::ArgumentExtension;
-}
-
-/// The id of an ABI signature within the `SigSet`.
-#[derive(Copy, Clone, PartialEq, Eq, Hash, PartialOrd, Ord)]
-pub struct Sig(u32);
-cranelift_entity::entity_impl!(Sig);
-
-impl Sig {
-    fn prev(self) -> Option<Sig> {
-        self.0.checked_sub(1).map(Sig)
-    }
-}
-
-/// ABI information shared between body (callee) and caller.
-#[derive(Clone, Debug)]
-pub struct SigData {
-    /// Currently both return values and arguments are stored in a continuous space vector
-    /// in `SigSet::abi_args`.
-    ///
-    /// ```plain
-    ///                  +----------------------------------------------+
-    ///                  | return values                                |
-    ///                  | ...                                          |
-    ///   rets_end   --> +----------------------------------------------+
-    ///                  | arguments                                    |
-    ///                  | ...                                          |
-    ///   args_end   --> +----------------------------------------------+
-    ///
-    /// ```
-    ///
-    /// Note we only store two offsets as rets_end == args_start, and rets_start == prev.args_end.
-    ///
-    /// Argument location ending offset (regs or stack slots). Stack offsets are relative to
-    /// SP on entry to function.
-    ///
-    /// This is a index into the `SigSet::abi_args`.
-    args_end: u32,
-
-    /// Return-value location ending offset. Stack offsets are relative to the return-area
-    /// pointer.
-    ///
-    /// This is a index into the `SigSet::abi_args`.
-    rets_end: u32,
-
-    /// Space on stack used to store arguments. We're storing the size in u32 to
-    /// reduce the size of the struct.
-    sized_stack_arg_space: u32,
-
-    /// Space on stack used to store return values. We're storing the size in u32 to
-    /// reduce the size of the struct.
-    sized_stack_ret_space: u32,
-
-    /// Index in `args` of the stack-return-value-area argument.
-    stack_ret_arg: Option<u16>,
-
-    /// Calling convention used.
-    call_conv: isa::CallConv,
-}
-
-impl SigData {
-    /// Get total stack space required for arguments.
-    pub fn sized_stack_arg_space(&self) -> i64 {
-        self.sized_stack_arg_space.into()
-    }
-
-    /// Get total stack space required for return values.
-    pub fn sized_stack_ret_space(&self) -> i64 {
-        self.sized_stack_ret_space.into()
-    }
-
-    /// Get calling convention used.
-    pub fn call_conv(&self) -> isa::CallConv {
-        self.call_conv
-    }
-
-    /// The index of the stack-return-value-area argument, if any.
-    pub fn stack_ret_arg(&self) -> Option<u16> {
-        self.stack_ret_arg
-    }
-}
-
-/// A (mostly) deduplicated set of ABI signatures.
-///
-/// We say "mostly" because we do not dedupe between signatures interned via
-/// `ir::SigRef` (direct and indirect calls; the vast majority of signatures in
-/// this set) vs via `ir::Signature` (the callee itself and libcalls). Doing
-/// this final bit of deduplication would require filling out the
-/// `ir_signature_to_abi_sig`, which is a bunch of allocations (not just the
-/// hash map itself but params and returns vecs in each signature) that we want
-/// to avoid.
-///
-/// In general, prefer using the `ir::SigRef`-taking methods to the
-/// `ir::Signature`-taking methods when you can get away with it, as they don't
-/// require cloning non-copy types that will trigger heap allocations.
-///
-/// This type can be indexed by `Sig` to access its associated `SigData`.
-pub struct SigSet {
-    /// Interned `ir::Signature`s that we already have an ABI signature for.
-    ir_signature_to_abi_sig: FxHashMap<ir::Signature, Sig>,
-
-    /// Interned `ir::SigRef`s that we already have an ABI signature for.
-    ir_sig_ref_to_abi_sig: SecondaryMap<ir::SigRef, Option<Sig>>,
-
-    /// A single, shared allocation for all `ABIArg`s used by all
-    /// `SigData`s. Each `SigData` references its args/rets via indices into
-    /// this allocation.
-    abi_args: Vec<ABIArg>,
-
-    /// The actual ABI signatures, keyed by `Sig`.
-    sigs: PrimaryMap<Sig, SigData>,
-}
-
-impl SigSet {
-    /// Construct a new `SigSet`, interning all of the signatures used by the
-    /// given function.
-    pub fn new<M>(func: &ir::Function, flags: &settings::Flags) -> CodegenResult<Self>
-    where
-        M: ABIMachineSpec,
-    {
-        let arg_estimate = func.dfg.signatures.len() * 6;
-
-        let mut sigs = SigSet {
-            ir_signature_to_abi_sig: FxHashMap::default(),
-            ir_sig_ref_to_abi_sig: SecondaryMap::with_capacity(func.dfg.signatures.len()),
-            abi_args: Vec::with_capacity(arg_estimate),
-            sigs: PrimaryMap::with_capacity(1 + func.dfg.signatures.len()),
-        };
-
-        sigs.make_abi_sig_from_ir_signature::<M>(func.signature.clone(), flags)?;
-        for sig_ref in func.dfg.signatures.keys() {
-            sigs.make_abi_sig_from_ir_sig_ref::<M>(sig_ref, &func.dfg, flags)?;
-        }
-
-        Ok(sigs)
-    }
-
-    /// Have we already interned an ABI signature for the given `ir::Signature`?
-    pub fn have_abi_sig_for_signature(&self, signature: &ir::Signature) -> bool {
-        self.ir_signature_to_abi_sig.contains_key(signature)
-    }
-
-    /// Construct and intern an ABI signature for the given `ir::Signature`.
-    pub fn make_abi_sig_from_ir_signature<M>(
-        &mut self,
-        signature: ir::Signature,
-        flags: &settings::Flags,
-    ) -> CodegenResult<Sig>
-    where
-        M: ABIMachineSpec,
-    {
-        // Because the `HashMap` entry API requires taking ownership of the
-        // lookup key -- and we want to avoid unnecessary clones of
-        // `ir::Signature`s, even at the cost of duplicate lookups -- we can't
-        // have a single, get-or-create-style method for interning
-        // `ir::Signature`s into ABI signatures. So at least (debug) assert that
-        // we aren't creating duplicate ABI signatures for the same
-        // `ir::Signature`.
-        debug_assert!(!self.have_abi_sig_for_signature(&signature));
-
-        let sig_data = self.from_func_sig::<M>(&signature, flags)?;
-        let sig = self.sigs.push(sig_data);
-        self.ir_signature_to_abi_sig.insert(signature, sig);
-        Ok(sig)
-    }
-
-    fn make_abi_sig_from_ir_sig_ref<M>(
-        &mut self,
-        sig_ref: ir::SigRef,
-        dfg: &ir::DataFlowGraph,
-        flags: &settings::Flags,
-    ) -> CodegenResult<Sig>
-    where
-        M: ABIMachineSpec,
-    {
-        if let Some(sig) = self.ir_sig_ref_to_abi_sig[sig_ref] {
-            return Ok(sig);
-        }
-        let signature = &dfg.signatures[sig_ref];
-        let sig_data = self.from_func_sig::<M>(signature, flags)?;
-        let sig = self.sigs.push(sig_data);
-        self.ir_sig_ref_to_abi_sig[sig_ref] = Some(sig);
-        Ok(sig)
-    }
-
-    /// Get the already-interned ABI signature id for the given `ir::SigRef`.
-    pub fn abi_sig_for_sig_ref(&self, sig_ref: ir::SigRef) -> Sig {
-        self.ir_sig_ref_to_abi_sig
-            .get(sig_ref)
-            // Should have a secondary map entry...
-            .expect("must call `make_abi_sig_from_ir_sig_ref` before `get_abi_sig_for_sig_ref`")
-            // ...and that entry should be initialized.
-            .expect("must call `make_abi_sig_from_ir_sig_ref` before `get_abi_sig_for_sig_ref`")
-    }
-
-    /// Get the already-interned ABI signature id for the given `ir::Signature`.
-    pub fn abi_sig_for_signature(&self, signature: &ir::Signature) -> Sig {
-        self.ir_signature_to_abi_sig
-            .get(signature)
-            .copied()
-            .expect("must call `make_abi_sig_from_ir_signature` before `get_abi_sig_for_signature`")
-    }
-
-    pub fn from_func_sig<M: ABIMachineSpec>(
-        &mut self,
-        sig: &ir::Signature,
-        flags: &settings::Flags,
-    ) -> CodegenResult<SigData> {
-        let sret = missing_struct_return(sig);
-        let returns = sret.as_ref().into_iter().chain(&sig.returns);
-
-        // Compute args and retvals from signature. Handle retvals first,
-        // because we may need to add a return-area arg to the args.
-
-        // NOTE: We rely on the order of the args (rets -> args) inserted to compute the offsets in
-        // `SigSet::args()` and `SigSet::rets()`. Therefore, we cannot change the two
-        // compute_arg_locs order.
-        let (sized_stack_ret_space, _) = M::compute_arg_locs(
-            sig.call_conv,
-            flags,
-            returns,
-            ArgsOrRets::Rets,
-            /* extra ret-area ptr = */ false,
-            ArgsAccumulator::new(&mut self.abi_args),
-        )?;
-        let rets_end = u32::try_from(self.abi_args.len()).unwrap();
-
-        let need_stack_return_area = sized_stack_ret_space > 0;
-        let (sized_stack_arg_space, stack_ret_arg) = M::compute_arg_locs(
-            sig.call_conv,
-            flags,
-            &sig.params,
-            ArgsOrRets::Args,
-            need_stack_return_area,
-            ArgsAccumulator::new(&mut self.abi_args),
-        )?;
-        let args_end = u32::try_from(self.abi_args.len()).unwrap();
-
-        trace!(
-            "ABISig: sig {:?} => args end = {} rets end = {}
-             arg stack = {} ret stack = {} stack_ret_arg = {:?}",
-            sig,
-            args_end,
-            rets_end,
-            sized_stack_arg_space,
-            sized_stack_ret_space,
-            need_stack_return_area,
-        );
-
-        let stack_ret_arg = stack_ret_arg.map(|s| u16::try_from(s).unwrap());
-        Ok(SigData {
-            args_end,
-            rets_end,
-            sized_stack_arg_space,
-            sized_stack_ret_space,
-            stack_ret_arg,
-            call_conv: sig.call_conv,
-        })
-    }
-
-    /// Get this signature's ABI arguments.
-    pub fn args(&self, sig: Sig) -> &[ABIArg] {
-        let sig_data = &self.sigs[sig];
-        // Please see comments in `SigSet::from_func_sig` of how we store the offsets.
-        let start = usize::try_from(sig_data.rets_end).unwrap();
-        let end = usize::try_from(sig_data.args_end).unwrap();
-        &self.abi_args[start..end]
-    }
-
-    /// Get information specifying how to pass the implicit pointer
-    /// to the return-value area on the stack, if required.
-    pub fn get_ret_arg(&self, sig: Sig) -> Option<ABIArg> {
-        let sig_data = &self.sigs[sig];
-        if let Some(i) = sig_data.stack_ret_arg {
-            Some(self.args(sig)[usize::from(i)].clone())
-        } else {
-            None
-        }
-    }
-
-    /// Get information specifying how to pass one argument.
-    pub fn get_arg(&self, sig: Sig, idx: usize) -> ABIArg {
-        self.args(sig)[idx].clone()
-    }
-
-    /// Get this signature's ABI returns.
-    pub fn rets(&self, sig: Sig) -> &[ABIArg] {
-        let sig_data = &self.sigs[sig];
-        // Please see comments in `SigSet::from_func_sig` of how we store the offsets.
-        let start = usize::try_from(sig.prev().map_or(0, |prev| self.sigs[prev].args_end)).unwrap();
-        let end = usize::try_from(sig_data.rets_end).unwrap();
-        &self.abi_args[start..end]
-    }
-
-    /// Get information specifying how to pass one return value.
-    pub fn get_ret(&self, sig: Sig, idx: usize) -> ABIArg {
-        self.rets(sig)[idx].clone()
-    }
-
-    /// Return all clobbers for the callsite.
-    pub fn call_clobbers<M: ABIMachineSpec>(&self, sig: Sig) -> PRegSet {
-        let sig_data = &self.sigs[sig];
-        // Get clobbers: all caller-saves. These may include return value
-        // regs, which we will remove from the clobber set below.
-        let mut clobbers = M::get_regs_clobbered_by_call(sig_data.call_conv);
-
-        // Remove retval regs from clobbers. Skip StructRets: these
-        // are not, semantically, returns at the CLIF level, so we
-        // treat such a value as a clobber instead.
-        for ret in self.rets(sig) {
-            if let &ABIArg::Slots {
-                ref slots, purpose, ..
-            } = ret
-            {
-                if purpose == ir::ArgumentPurpose::StructReturn {
-                    continue;
-                }
-                for slot in slots {
-                    match slot {
-                        &ABIArgSlot::Reg { reg, .. } => {
-                            crate::trace!("call_clobbers: retval reg {:?}", reg);
-                            clobbers.remove(PReg::from(reg));
-                        }
-                        _ => {}
-                    }
-                }
-            }
-        }
-
-        clobbers
-    }
-
-    /// Get the number of arguments expected.
-    pub fn num_args(&self, sig: Sig) -> usize {
-        let len = self.args(sig).len();
-        if self.sigs[sig].stack_ret_arg.is_some() {
-            len - 1
-        } else {
-            len
-        }
-    }
-
-    /// Get the number of return values expected.
-    pub fn num_rets(&self, sig: Sig) -> usize {
-        self.rets(sig).len()
-    }
-}
-
-// NB: we do _not_ implement `IndexMut` because these signatures are
-// deduplicated and shared!
-impl std::ops::Index<Sig> for SigSet {
-    type Output = SigData;
-
-    fn index(&self, sig: Sig) -> &Self::Output {
-        &self.sigs[sig]
-    }
-}
-
-/// Structure describing the layout of a function's stack frame.
-pub struct FrameLayout {
-    /// N.B. The areas whose sizes are given in this structure fully
-    /// cover the current function's stack frame, from high to low
-    /// stack addresses in the sequence below.  Each size contains
-    /// any alignment padding that may be required by the ABI.
-
-    /// Size of incoming arguments on the stack.  This is not technically
-    /// part of this function's frame, but code in the function will still
-    /// need to access it.  Depending on the ABI, we may need to set up a
-    /// frame pointer to do so; we also may need to pop this area from the
-    /// stack upon return.
-    pub stack_args_size: u32,
-
-    /// Size of the "setup area", typically holding the return address
-    /// and/or the saved frame pointer.  This may be written either during
-    /// the call itself (e.g. a pushed return address) or by code emitted
-    /// from gen_prologue_frame_setup.  In any case, after that code has
-    /// completed execution, the stack pointer is expected to point to the
-    /// bottom of this area.  The same holds at the start of code emitted
-    /// by gen_epilogue_frame_restore.
-    pub setup_area_size: u32,
-
-    /// Size of the area used to save callee-saved clobbered registers.
-    /// This area is accessed by code emitted from gen_clobber_save and
-    /// gen_clobber_restore.
-    pub clobber_size: u32,
-
-    /// Storage allocated for the fixed part of the stack frame.
-    /// This contains stack slots and spill slots.  The "nominal SP"
-    /// during execution of the function points to the bottom of this.
-    pub fixed_frame_storage_size: u32,
-
-    /// Stack size to be reserved for outgoing arguments, if used by
-    /// the current ABI, or 0 otherwise.  After gen_clobber_save and
-    /// before gen_clobber_restore, the stack pointer points to the
-    /// bottom of this area.
-    pub outgoing_args_size: u32,
-
-    /// Sorted list of callee-saved registers that are clobbered
-    /// according to the ABI.  These registers will be saved and
-    /// restored by gen_clobber_save and gen_clobber_restore.
-    pub clobbered_callee_saves: Vec<Writable<RealReg>>,
-}
-
-/// ABI object for a function body.
-pub struct Callee<M: ABIMachineSpec> {
-    /// CLIF-level signature, possibly normalized.
-    ir_sig: ir::Signature,
-    /// Signature: arg and retval regs.
-    sig: Sig,
-    /// Defined dynamic types.
-    dynamic_type_sizes: HashMap<Type, u32>,
-    /// Offsets to each dynamic stackslot.
-    dynamic_stackslots: PrimaryMap<DynamicStackSlot, u32>,
-    /// Offsets to each sized stackslot.
-    sized_stackslots: PrimaryMap<StackSlot, u32>,
-    /// Total stack size of all stackslots
-    stackslots_size: u32,
-    /// Stack size to be reserved for outgoing arguments.
-    outgoing_args_size: u32,
-    /// Register-argument defs, to be provided to the `args`
-    /// pseudo-inst, and pregs to constrain them to.
-    reg_args: Vec<ArgPair>,
-    /// Clobbered registers, from regalloc.
-    clobbered: Vec<Writable<RealReg>>,
-    /// Total number of spillslots, including for 'dynamic' types, from regalloc.
-    spillslots: Option<usize>,
-    /// Finalized frame layout for this function.
-    frame_layout: Option<FrameLayout>,
-    /// The register holding the return-area pointer, if needed.
-    ret_area_ptr: Option<Writable<Reg>>,
-    /// Temp registers required for argument setup, if needed.
-    arg_temp_reg: Vec<Option<Writable<Reg>>>,
-    /// Calling convention this function expects.
-    call_conv: isa::CallConv,
-    /// The settings controlling this function's compilation.
-    flags: settings::Flags,
-    /// The ISA-specific flag values controlling this function's compilation.
-    isa_flags: M::F,
-    /// Whether or not this function is a "leaf", meaning it calls no other
-    /// functions
-    is_leaf: bool,
-    /// If this function has a stack limit specified, then `Reg` is where the
-    /// stack limit will be located after the instructions specified have been
-    /// executed.
-    ///
-    /// Note that this is intended for insertion into the prologue, if
-    /// present. Also note that because the instructions here execute in the
-    /// prologue this happens after legalization/register allocation/etc so we
-    /// need to be extremely careful with each instruction. The instructions are
-    /// manually register-allocated and carefully only use caller-saved
-    /// registers and keep nothing live after this sequence of instructions.
-    stack_limit: Option<(Reg, SmallInstVec<M::I>)>,
-    /// Are we to invoke the probestack function in the prologue? If so,
-    /// what is the minimum size at which we must invoke it?
-    probestack_min_frame: Option<u32>,
-
-    _mach: PhantomData<M>,
-}
-
-fn get_special_purpose_param_register(
-    f: &ir::Function,
-    sigs: &SigSet,
-    sig: Sig,
-    purpose: ir::ArgumentPurpose,
-) -> Option<Reg> {
-    let idx = f.signature.special_param_index(purpose)?;
-    match &sigs.args(sig)[idx] {
-        &ABIArg::Slots { ref slots, .. } => match &slots[0] {
-            &ABIArgSlot::Reg { reg, .. } => Some(reg.into()),
-            _ => None,
-        },
-        _ => None,
-    }
-}
-
-fn checked_round_up(val: u32, mask: u32) -> Option<u32> {
-    Some(val.checked_add(mask)? & !mask)
-}
-
-impl<M: ABIMachineSpec> Callee<M> {
-    /// Create a new body ABI instance.
-    pub fn new<'a>(
-        f: &ir::Function,
-        isa: &dyn TargetIsa,
-        isa_flags: &M::F,
-        sigs: &SigSet,
-    ) -> CodegenResult<Self> {
-        trace!("ABI: func signature {:?}", f.signature);
-
-        let flags = isa.flags().clone();
-        let sig = sigs.abi_sig_for_signature(&f.signature);
-
-        let call_conv = f.signature.call_conv;
-        // Only these calling conventions are supported.
-        debug_assert!(
-            call_conv == isa::CallConv::SystemV
-                || call_conv == isa::CallConv::Tail
-                || call_conv == isa::CallConv::Fast
-                || call_conv == isa::CallConv::Cold
-                || call_conv.extends_windows_fastcall()
-                || call_conv == isa::CallConv::WasmtimeSystemV
-                || call_conv == isa::CallConv::AppleAarch64,
-            "Unsupported calling convention: {:?}",
-            call_conv
-        );
-
-        // Compute sized stackslot locations and total stackslot size.
-        let mut sized_stack_offset: u32 = 0;
-        let mut sized_stackslots = PrimaryMap::new();
-        for (stackslot, data) in f.sized_stack_slots.iter() {
-            let off = sized_stack_offset;
-            sized_stack_offset = sized_stack_offset
-                .checked_add(data.size)
-                .ok_or(CodegenError::ImplLimitExceeded)?;
-            let mask = M::word_bytes() - 1;
-            sized_stack_offset = checked_round_up(sized_stack_offset, mask)
-                .ok_or(CodegenError::ImplLimitExceeded)?;
-            debug_assert_eq!(stackslot.as_u32() as usize, sized_stackslots.len());
-            sized_stackslots.push(off);
-        }
-
-        // Compute dynamic stackslot locations and total stackslot size.
-        let mut dynamic_stackslots = PrimaryMap::new();
-        let mut dynamic_stack_offset: u32 = sized_stack_offset;
-        for (stackslot, data) in f.dynamic_stack_slots.iter() {
-            debug_assert_eq!(stackslot.as_u32() as usize, dynamic_stackslots.len());
-            let off = dynamic_stack_offset;
-            let ty = f.get_concrete_dynamic_ty(data.dyn_ty).ok_or_else(|| {
-                CodegenError::Unsupported(format!("invalid dynamic vector type: {}", data.dyn_ty))
-            })?;
-            dynamic_stack_offset = dynamic_stack_offset
-                .checked_add(isa.dynamic_vector_bytes(ty))
-                .ok_or(CodegenError::ImplLimitExceeded)?;
-            let mask = M::word_bytes() - 1;
-            dynamic_stack_offset = checked_round_up(dynamic_stack_offset, mask)
-                .ok_or(CodegenError::ImplLimitExceeded)?;
-            dynamic_stackslots.push(off);
-        }
-        let stackslots_size = dynamic_stack_offset;
-
-        let mut dynamic_type_sizes = HashMap::with_capacity(f.dfg.dynamic_types.len());
-        for (dyn_ty, _data) in f.dfg.dynamic_types.iter() {
-            let ty = f
-                .get_concrete_dynamic_ty(dyn_ty)
-                .unwrap_or_else(|| panic!("invalid dynamic vector type: {}", dyn_ty));
-            let size = isa.dynamic_vector_bytes(ty);
-            dynamic_type_sizes.insert(ty, size);
-        }
-
-        // Figure out what instructions, if any, will be needed to check the
-        // stack limit. This can either be specified as a special-purpose
-        // argument or as a global value which often calculates the stack limit
-        // from the arguments.
-        let stack_limit =
-            get_special_purpose_param_register(f, sigs, sig, ir::ArgumentPurpose::StackLimit)
-                .map(|reg| (reg, smallvec![]))
-                .or_else(|| {
-                    f.stack_limit
-                        .map(|gv| gen_stack_limit::<M>(f, sigs, sig, gv))
-                });
-
-        // Determine whether a probestack call is required for large enough
-        // frames (and the minimum frame size if so).
-        let probestack_min_frame = if flags.enable_probestack() {
-            assert!(
-                !flags.probestack_func_adjusts_sp(),
-                "SP-adjusting probestack not supported in new backends"
-            );
-            Some(1 << flags.probestack_size_log2())
-        } else {
-            None
-        };
-
-        Ok(Self {
-            ir_sig: ensure_struct_return_ptr_is_returned(&f.signature),
-            sig,
-            dynamic_stackslots,
-            dynamic_type_sizes,
-            sized_stackslots,
-            stackslots_size,
-            outgoing_args_size: 0,
-            reg_args: vec![],
-            clobbered: vec![],
-            spillslots: None,
-            frame_layout: None,
-            ret_area_ptr: None,
-            arg_temp_reg: vec![],
-            call_conv,
-            flags,
-            isa_flags: isa_flags.clone(),
-            is_leaf: f.is_leaf(),
-            stack_limit,
-            probestack_min_frame,
-            _mach: PhantomData,
-        })
-    }
-
-    /// Inserts instructions necessary for checking the stack limit into the
-    /// prologue.
-    ///
-    /// This function will generate instructions necessary for perform a stack
-    /// check at the header of a function. The stack check is intended to trap
-    /// if the stack pointer goes below a particular threshold, preventing stack
-    /// overflow in wasm or other code. The `stack_limit` argument here is the
-    /// register which holds the threshold below which we're supposed to trap.
-    /// This function is known to allocate `stack_size` bytes and we'll push
-    /// instructions onto `insts`.
-    ///
-    /// Note that the instructions generated here are special because this is
-    /// happening so late in the pipeline (e.g. after register allocation). This
-    /// means that we need to do manual register allocation here and also be
-    /// careful to not clobber any callee-saved or argument registers. For now
-    /// this routine makes do with the `spilltmp_reg` as one temporary
-    /// register, and a second register of `tmp2` which is caller-saved. This
-    /// should be fine for us since no spills should happen in this sequence of
-    /// instructions, so our register won't get accidentally clobbered.
-    ///
-    /// No values can be live after the prologue, but in this case that's ok
-    /// because we just need to perform a stack check before progressing with
-    /// the rest of the function.
-    fn insert_stack_check(
-        &self,
-        stack_limit: Reg,
-        stack_size: u32,
-        insts: &mut SmallInstVec<M::I>,
-    ) {
-        // With no explicit stack allocated we can just emit the simple check of
-        // the stack registers against the stack limit register, and trap if
-        // it's out of bounds.
-        if stack_size == 0 {
-            insts.extend(M::gen_stack_lower_bound_trap(stack_limit));
-            return;
-        }
-
-        // Note that the 32k stack size here is pretty special. See the
-        // documentation in x86/abi.rs for why this is here. The general idea is
-        // that we're protecting against overflow in the addition that happens
-        // below.
-        if stack_size >= 32 * 1024 {
-            insts.extend(M::gen_stack_lower_bound_trap(stack_limit));
-        }
-
-        // Add the `stack_size` to `stack_limit`, placing the result in
-        // `scratch`.
-        //
-        // Note though that `stack_limit`'s register may be the same as
-        // `scratch`. If our stack size doesn't fit into an immediate this
-        // means we need a second scratch register for loading the stack size
-        // into a register.
-        let scratch = Writable::from_reg(M::get_stacklimit_reg(self.call_conv));
-        insts.extend(M::gen_add_imm(self.call_conv, scratch, stack_limit, stack_size).into_iter());
-        insts.extend(M::gen_stack_lower_bound_trap(scratch.to_reg()));
-    }
-}
-
-/// Generates the instructions necessary for the `gv` to be materialized into a
-/// register.
-///
-/// This function will return a register that will contain the result of
-/// evaluating `gv`. It will also return any instructions necessary to calculate
-/// the value of the register.
-///
-/// Note that global values are typically lowered to instructions via the
-/// standard legalization pass. Unfortunately though prologue generation happens
-/// so late in the pipeline that we can't use these legalization passes to
-/// generate the instructions for `gv`. As a result we duplicate some lowering
-/// of `gv` here and support only some global values. This is similar to what
-/// the x86 backend does for now, and hopefully this can be somewhat cleaned up
-/// in the future too!
-///
-/// Also note that this function will make use of `writable_spilltmp_reg()` as a
-/// temporary register to store values in if necessary. Currently after we write
-/// to this register there's guaranteed to be no spilled values between where
-/// it's used, because we're not participating in register allocation anyway!
-fn gen_stack_limit<M: ABIMachineSpec>(
-    f: &ir::Function,
-    sigs: &SigSet,
-    sig: Sig,
-    gv: ir::GlobalValue,
-) -> (Reg, SmallInstVec<M::I>) {
-    let mut insts = smallvec![];
-    let reg = generate_gv::<M>(f, sigs, sig, gv, &mut insts);
-    return (reg, insts);
-}
-
-fn generate_gv<M: ABIMachineSpec>(
-    f: &ir::Function,
-    sigs: &SigSet,
-    sig: Sig,
-    gv: ir::GlobalValue,
-    insts: &mut SmallInstVec<M::I>,
-) -> Reg {
-    match f.global_values[gv] {
-        // Return the direct register the vmcontext is in
-        ir::GlobalValueData::VMContext => {
-            get_special_purpose_param_register(f, sigs, sig, ir::ArgumentPurpose::VMContext)
-                .expect("no vmcontext parameter found")
-        }
-        // Load our base value into a register, then load from that register
-        // in to a temporary register.
-        ir::GlobalValueData::Load {
-            base,
-            offset,
-            global_type: _,
-            flags: _,
-        } => {
-            let base = generate_gv::<M>(f, sigs, sig, base, insts);
-            let into_reg = Writable::from_reg(M::get_stacklimit_reg(f.stencil.signature.call_conv));
-            insts.push(M::gen_load_base_offset(
-                into_reg,
-                base,
-                offset.into(),
-                M::word_type(),
-            ));
-            return into_reg.to_reg();
-        }
-        ref other => panic!("global value for stack limit not supported: {}", other),
-    }
-}
-
-fn gen_load_stack_multi<M: ABIMachineSpec>(
-    from: StackAMode,
-    dst: ValueRegs<Writable<Reg>>,
-    ty: Type,
-) -> SmallInstVec<M::I> {
-    let mut ret = smallvec![];
-    let (_, tys) = M::I::rc_for_type(ty).unwrap();
-    let mut offset = 0;
-    // N.B.: registers are given in the `ValueRegs` in target endian order.
-    for (&dst, &ty) in dst.regs().iter().zip(tys.iter()) {
-        ret.push(M::gen_load_stack(from.offset(offset), dst, ty));
-        offset += ty.bytes() as i64;
-    }
-    ret
-}
-
-fn gen_store_stack_multi<M: ABIMachineSpec>(
-    from: StackAMode,
-    src: ValueRegs<Reg>,
-    ty: Type,
-) -> SmallInstVec<M::I> {
-    let mut ret = smallvec![];
-    let (_, tys) = M::I::rc_for_type(ty).unwrap();
-    let mut offset = 0;
-    // N.B.: registers are given in the `ValueRegs` in target endian order.
-    for (&src, &ty) in src.regs().iter().zip(tys.iter()) {
-        ret.push(M::gen_store_stack(from.offset(offset), src, ty));
-        offset += ty.bytes() as i64;
-    }
-    ret
-}
-
-/// If the signature needs to be legalized, then return the struct-return
-/// parameter that should be prepended to its returns. Otherwise, return `None`.
-fn missing_struct_return(sig: &ir::Signature) -> Option<ir::AbiParam> {
-    let struct_ret_index = sig.special_param_index(ArgumentPurpose::StructReturn)?;
-    if !sig.uses_special_return(ArgumentPurpose::StructReturn) {
-        return Some(sig.params[struct_ret_index]);
-    }
-
-    None
-}
-
-fn ensure_struct_return_ptr_is_returned(sig: &ir::Signature) -> ir::Signature {
-    let mut sig = sig.clone();
-    if let Some(sret) = missing_struct_return(&sig) {
-        sig.returns.insert(0, sret);
-    }
-    sig
-}
-
-/// ### Pre-Regalloc Functions
-///
-/// These methods of `Callee` may only be called before regalloc.
-impl<M: ABIMachineSpec> Callee<M> {
-    /// Access the (possibly legalized) signature.
-    pub fn signature(&self) -> &ir::Signature {
-        debug_assert!(
-            missing_struct_return(&self.ir_sig).is_none(),
-            "`Callee::ir_sig` is always legalized"
-        );
-        &self.ir_sig
-    }
-
-    /// Does the ABI-body code need temp registers (and if so, of what type)?
-    /// They will be provided to `init()` as the `temps` arg if so.
-    pub fn temps_needed(&self, sigs: &SigSet) -> Vec<Type> {
-        let mut temp_tys = vec![];
-        for arg in sigs.args(self.sig) {
-            match arg {
-                &ABIArg::ImplicitPtrArg { pointer, .. } => match &pointer {
-                    &ABIArgSlot::Reg { .. } => {}
-                    &ABIArgSlot::Stack { ty, .. } => {
-                        temp_tys.push(ty);
-                    }
-                },
-                _ => {}
-            }
-        }
-        if sigs[self.sig].stack_ret_arg.is_some() {
-            temp_tys.push(M::word_type());
-        }
-        temp_tys
-    }
-
-    /// Initialize. This is called after the Callee is constructed because it
-    /// may be provided with a vector of temp vregs, which can only be allocated
-    /// once the lowering context exists.
-    pub fn init(&mut self, sigs: &SigSet, temps: Vec<Writable<Reg>>) {
-        let mut temps_iter = temps.into_iter();
-        for arg in sigs.args(self.sig) {
-            let temp = match arg {
-                &ABIArg::ImplicitPtrArg { pointer, .. } => match &pointer {
-                    &ABIArgSlot::Reg { .. } => None,
-                    &ABIArgSlot::Stack { .. } => Some(temps_iter.next().unwrap()),
-                },
-                _ => None,
-            };
-            self.arg_temp_reg.push(temp);
-        }
-        if sigs[self.sig].stack_ret_arg.is_some() {
-            self.ret_area_ptr = Some(temps_iter.next().unwrap());
-        }
-    }
-
-    /// Accumulate outgoing arguments.
-    ///
-    /// This ensures that at least `size` bytes are allocated in the prologue to
-    /// be available for use in function calls to hold arguments and/or return
-    /// values. If this function is called multiple times, the maximum of all
-    /// `size` values will be available.
-    pub fn accumulate_outgoing_args_size(&mut self, size: u32) {
-        if size > self.outgoing_args_size {
-            self.outgoing_args_size = size;
-        }
-    }
-
-    pub fn is_forward_edge_cfi_enabled(&self) -> bool {
-        self.isa_flags.is_forward_edge_cfi_enabled()
-    }
-
-    /// Get the calling convention implemented by this ABI object.
-    pub fn call_conv(&self, sigs: &SigSet) -> isa::CallConv {
-        sigs[self.sig].call_conv
-    }
-
-    /// Get the ABI-dependent MachineEnv for managing register allocation.
-    pub fn machine_env(&self, sigs: &SigSet) -> &MachineEnv {
-        M::get_machine_env(&self.flags, self.call_conv(sigs))
-    }
-
-    /// The offsets of all sized stack slots (not spill slots) for debuginfo purposes.
-    pub fn sized_stackslot_offsets(&self) -> &PrimaryMap<StackSlot, u32> {
-        &self.sized_stackslots
-    }
-
-    /// The offsets of all dynamic stack slots (not spill slots) for debuginfo purposes.
-    pub fn dynamic_stackslot_offsets(&self) -> &PrimaryMap<DynamicStackSlot, u32> {
-        &self.dynamic_stackslots
-    }
-
-    /// Generate an instruction which copies an argument to a destination
-    /// register.
-    pub fn gen_copy_arg_to_regs(
-        &mut self,
-        sigs: &SigSet,
-        idx: usize,
-        into_regs: ValueRegs<Writable<Reg>>,
-        vregs: &mut VRegAllocator<M::I>,
-    ) -> SmallInstVec<M::I> {
-        let mut insts = smallvec![];
-        let mut copy_arg_slot_to_reg = |slot: &ABIArgSlot, into_reg: &Writable<Reg>| {
-            match slot {
-                &ABIArgSlot::Reg { reg, .. } => {
-                    // Add a preg -> def pair to the eventual `args`
-                    // instruction.  Extension mode doesn't matter
-                    // (we're copying out, not in; we ignore high bits
-                    // by convention).
-                    let arg = ArgPair {
-                        vreg: *into_reg,
-                        preg: reg.into(),
-                    };
-                    self.reg_args.push(arg);
-                }
-                &ABIArgSlot::Stack {
-                    offset,
-                    ty,
-                    extension,
-                    ..
-                } => {
-                    // However, we have to respect the extention mode for stack
-                    // slots, or else we grab the wrong bytes on big-endian.
-                    let ext = M::get_ext_mode(sigs[self.sig].call_conv, extension);
-                    let ty = match (ext, ty_bits(ty) as u32) {
-                        (ArgumentExtension::Uext, n) | (ArgumentExtension::Sext, n)
-                            if n < M::word_bits() =>
-                        {
-                            M::word_type()
-                        }
-                        _ => ty,
-                    };
-                    insts.push(M::gen_load_stack(
-                        StackAMode::FPOffset(
-                            M::fp_to_arg_offset(self.call_conv, &self.flags) + offset,
-                            ty,
-                        ),
-                        *into_reg,
-                        ty,
-                    ));
-                }
-            }
-        };
-
-        match &sigs.args(self.sig)[idx] {
-            &ABIArg::Slots { ref slots, .. } => {
-                assert_eq!(into_regs.len(), slots.len());
-                for (slot, into_reg) in slots.iter().zip(into_regs.regs().iter()) {
-                    copy_arg_slot_to_reg(&slot, &into_reg);
-                }
-            }
-            &ABIArg::StructArg {
-                pointer, offset, ..
-            } => {
-                let into_reg = into_regs.only_reg().unwrap();
-                if let Some(slot) = pointer {
-                    // Buffer address is passed in a register or stack slot.
-                    copy_arg_slot_to_reg(&slot, &into_reg);
-                } else {
-                    // Buffer address is implicitly defined by the ABI.
-                    insts.push(M::gen_get_stack_addr(
-                        StackAMode::FPOffset(
-                            M::fp_to_arg_offset(self.call_conv, &self.flags) + offset,
-                            I8,
-                        ),
-                        into_reg,
-                        I8,
-                    ));
-                }
-            }
-            &ABIArg::ImplicitPtrArg { pointer, ty, .. } => {
-                let into_reg = into_regs.only_reg().unwrap();
-                // We need to dereference the pointer.
-                let base = match &pointer {
-                    &ABIArgSlot::Reg { reg, ty, .. } => {
-                        let tmp = vregs.alloc_with_deferred_error(ty).only_reg().unwrap();
-                        self.reg_args.push(ArgPair {
-                            vreg: Writable::from_reg(tmp),
-                            preg: reg.into(),
-                        });
-                        tmp
-                    }
-                    &ABIArgSlot::Stack { offset, ty, .. } => {
-                        // In this case we need a temp register to hold the address.
-                        // This was allocated in the `init` routine.
-                        let addr_reg = self.arg_temp_reg[idx].unwrap();
-                        insts.push(M::gen_load_stack(
-                            StackAMode::FPOffset(
-                                M::fp_to_arg_offset(self.call_conv, &self.flags) + offset,
-                                ty,
-                            ),
-                            addr_reg,
-                            ty,
-                        ));
-                        addr_reg.to_reg()
-                    }
-                };
-                insts.push(M::gen_load_base_offset(into_reg, base, 0, ty));
-            }
-        }
-        insts
-    }
-
-    /// Is the given argument needed in the body (as opposed to, e.g., serving
-    /// only as a special ABI-specific placeholder)? This controls whether
-    /// lowering will copy it to a virtual reg use by CLIF instructions.
-    pub fn arg_is_needed_in_body(&self, _idx: usize) -> bool {
-        true
-    }
-
-    /// Generate an instruction which copies a source register to a return value slot.
-    pub fn gen_copy_regs_to_retval(
-        &self,
-        sigs: &SigSet,
-        idx: usize,
-        from_regs: ValueRegs<Reg>,
-        vregs: &mut VRegAllocator<M::I>,
-    ) -> (SmallVec<[RetPair; 2]>, SmallInstVec<M::I>) {
-        let mut reg_pairs = smallvec![];
-        let mut ret = smallvec![];
-        let word_bits = M::word_bits() as u8;
-        match &sigs.rets(self.sig)[idx] {
-            &ABIArg::Slots { ref slots, .. } => {
-                assert_eq!(from_regs.len(), slots.len());
-                for (slot, &from_reg) in slots.iter().zip(from_regs.regs().iter()) {
-                    match slot {
-                        &ABIArgSlot::Reg {
-                            reg, ty, extension, ..
-                        } => {
-                            let from_bits = ty_bits(ty) as u8;
-                            let ext = M::get_ext_mode(sigs[self.sig].call_conv, extension);
-                            let vreg = match (ext, from_bits) {
-                                (ir::ArgumentExtension::Uext, n)
-                                | (ir::ArgumentExtension::Sext, n)
-                                    if n < word_bits =>
-                                {
-                                    let signed = ext == ir::ArgumentExtension::Sext;
-                                    let dst =
-                                        writable_value_regs(vregs.alloc_with_deferred_error(ty))
-                                            .only_reg()
-                                            .unwrap();
-                                    ret.push(M::gen_extend(
-                                        dst, from_reg, signed, from_bits,
-                                        /* to_bits = */ word_bits,
-                                    ));
-                                    dst.to_reg()
-                                }
-                                _ => {
-                                    // No move needed, regalloc2 will emit it using the constraint
-                                    // added by the RetPair.
-                                    from_reg
-                                }
-                            };
-                            reg_pairs.push(RetPair {
-                                vreg,
-                                preg: Reg::from(reg),
-                            });
-                        }
-                        &ABIArgSlot::Stack {
-                            offset,
-                            ty,
-                            extension,
-                            ..
-                        } => {
-                            let mut ty = ty;
-                            let from_bits = ty_bits(ty) as u8;
-                            // A machine ABI implementation should ensure that stack frames
-                            // have "reasonable" size. All current ABIs for machinst
-                            // backends (aarch64 and x64) enforce a 128MB limit.
-                            let off = i32::try_from(offset).expect(
-                                "Argument stack offset greater than 2GB; should hit impl limit first",
-                                );
-                            let ext = M::get_ext_mode(sigs[self.sig].call_conv, extension);
-                            // Trash the from_reg; it should be its last use.
-                            match (ext, from_bits) {
-                                (ir::ArgumentExtension::Uext, n)
-                                | (ir::ArgumentExtension::Sext, n)
-                                    if n < word_bits =>
-                                {
-                                    assert_eq!(M::word_reg_class(), from_reg.class());
-                                    let signed = ext == ir::ArgumentExtension::Sext;
-                                    let dst =
-                                        writable_value_regs(vregs.alloc_with_deferred_error(ty))
-                                            .only_reg()
-                                            .unwrap();
-                                    ret.push(M::gen_extend(
-                                        dst, from_reg, signed, from_bits,
-                                        /* to_bits = */ word_bits,
-                                    ));
-                                    // Store the extended version.
-                                    ty = M::word_type();
-                                }
-                                _ => {}
-                            };
-                            ret.push(M::gen_store_base_offset(
-                                self.ret_area_ptr.unwrap().to_reg(),
-                                off,
-                                from_reg,
-                                ty,
-                            ));
-                        }
-                    }
-                }
-            }
-            ABIArg::StructArg { .. } => {
-                panic!("StructArg in return position is unsupported");
-            }
-            ABIArg::ImplicitPtrArg { .. } => {
-                panic!("ImplicitPtrArg in return position is unsupported");
-            }
-        }
-        (reg_pairs, ret)
-    }
-
-    /// Generate any setup instruction needed to save values to the
-    /// return-value area. This is usually used when were are multiple return
-    /// values or an otherwise large return value that must be passed on the
-    /// stack; typically the ABI specifies an extra hidden argument that is a
-    /// pointer to that memory.
-    pub fn gen_retval_area_setup(
-        &mut self,
-        sigs: &SigSet,
-        vregs: &mut VRegAllocator<M::I>,
-    ) -> Option<M::I> {
-        if let Some(i) = sigs[self.sig].stack_ret_arg {
-            let insts = self.gen_copy_arg_to_regs(
-                sigs,
-                i.into(),
-                ValueRegs::one(self.ret_area_ptr.unwrap()),
-                vregs,
-            );
-            insts.into_iter().next().map(|inst| {
-                trace!(
-                    "gen_retval_area_setup: inst {:?}; ptr reg is {:?}",
-                    inst,
-                    self.ret_area_ptr.unwrap().to_reg()
-                );
-                inst
-            })
-        } else {
-            trace!("gen_retval_area_setup: not needed");
-            None
-        }
-    }
-
-    /// Generate a return instruction.
-    pub fn gen_rets(&self, rets: Vec<RetPair>) -> M::I {
-        M::gen_rets(rets)
-    }
-
-    /// Produce an instruction that computes a sized stackslot address.
-    pub fn sized_stackslot_addr(
-        &self,
-        slot: StackSlot,
-        offset: u32,
-        into_reg: Writable<Reg>,
-    ) -> M::I {
-        // Offset from beginning of stackslot area, which is at nominal SP (see
-        // [MemArg::NominalSPOffset] for more details on nominal SP tracking).
-        let stack_off = self.sized_stackslots[slot] as i64;
-        let sp_off: i64 = stack_off + (offset as i64);
-        M::gen_get_stack_addr(StackAMode::NominalSPOffset(sp_off, I8), into_reg, I8)
-    }
-
-    /// Produce an instruction that computes a dynamic stackslot address.
-    pub fn dynamic_stackslot_addr(&self, slot: DynamicStackSlot, into_reg: Writable<Reg>) -> M::I {
-        let stack_off = self.dynamic_stackslots[slot] as i64;
-        M::gen_get_stack_addr(
-            StackAMode::NominalSPOffset(stack_off, I64X2XN),
-            into_reg,
-            I64X2XN,
-        )
-    }
-
-    /// Load from a spillslot.
-    pub fn load_spillslot(
-        &self,
-        slot: SpillSlot,
-        ty: Type,
-        into_regs: ValueRegs<Writable<Reg>>,
-    ) -> SmallInstVec<M::I> {
-        let sp_off = self.get_spillslot_offset(slot);
-        trace!("load_spillslot: slot {:?} -> sp_off {}", slot, sp_off);
-
-        gen_load_stack_multi::<M>(StackAMode::NominalSPOffset(sp_off, ty), into_regs, ty)
-    }
-
-    /// Store to a spillslot.
-    pub fn store_spillslot(
-        &self,
-        slot: SpillSlot,
-        ty: Type,
-        from_regs: ValueRegs<Reg>,
-    ) -> SmallInstVec<M::I> {
-        let sp_off = self.get_spillslot_offset(slot);
-        trace!("store_spillslot: slot {:?} -> sp_off {}", slot, sp_off);
-
-        gen_store_stack_multi::<M>(StackAMode::NominalSPOffset(sp_off, ty), from_regs, ty)
-    }
-
-    /// Get an `args` pseudo-inst, if any, that should appear at the
-    /// very top of the function body prior to regalloc.
-    pub fn take_args(&mut self) -> Option<M::I> {
-        if self.reg_args.len() > 0 {
-            // Very first instruction is an `args` pseudo-inst that
-            // establishes live-ranges for in-register arguments and
-            // constrains them at the start of the function to the
-            // locations defined by the ABI.
-            Some(M::gen_args(std::mem::take(&mut self.reg_args)))
-        } else {
-            None
-        }
-    }
-}
-
-/// ### Post-Regalloc Functions
-///
-/// These methods of `Callee` may only be called after
-/// regalloc.
-impl<M: ABIMachineSpec> Callee<M> {
-    /// Update with the number of spillslots, post-regalloc.
-    pub fn set_num_spillslots(&mut self, slots: usize) {
-        self.spillslots = Some(slots);
-    }
-
-    /// Update with the clobbered registers, post-regalloc.
-    pub fn set_clobbered(&mut self, clobbered: Vec<Writable<RealReg>>) {
-        self.clobbered = clobbered;
-    }
-
-    /// Generate a stack map, given a list of spillslots and the emission state
-    /// at a given program point (prior to emission of the safepointing
-    /// instruction).
-    pub fn spillslots_to_stack_map(
-        &self,
-        slots: &[SpillSlot],
-        state: &<M::I as MachInstEmit>::State,
-    ) -> StackMap {
-        let virtual_sp_offset = M::get_virtual_sp_offset_from_state(state);
-        let nominal_sp_to_fp = M::get_nominal_sp_to_fp(state);
-        assert!(virtual_sp_offset >= 0);
-        trace!(
-            "spillslots_to_stackmap: slots = {:?}, state = {:?}",
-            slots,
-            state
-        );
-        let map_size = (virtual_sp_offset + nominal_sp_to_fp) as u32;
-        let bytes = M::word_bytes();
-        let map_words = (map_size + bytes - 1) / bytes;
-        let mut bits = std::iter::repeat(false)
-            .take(map_words as usize)
-            .collect::<Vec<bool>>();
-
-        let first_spillslot_word =
-            ((self.stackslots_size + virtual_sp_offset as u32) / bytes) as usize;
-        for &slot in slots {
-            let slot = slot.index();
-            bits[first_spillslot_word + slot] = true;
-        }
-
-        StackMap::from_slice(&bits[..])
-    }
-
-    /// Compute the final frame layout, post-regalloc.
-    ///
-    /// This must be called before gen_prologue or gen_epilogue.
-    pub fn compute_frame_layout(&mut self, sigs: &SigSet) {
-        let bytes = M::word_bytes();
-        let total_stacksize = self.stackslots_size + bytes * self.spillslots.unwrap() as u32;
-        let mask = M::stack_align(self.call_conv) - 1;
-        let total_stacksize = (total_stacksize + mask) & !mask; // 16-align the stack.
-        self.frame_layout = Some(M::compute_frame_layout(
-            self.call_conv,
-            &self.flags,
-            self.signature(),
-            &self.clobbered,
-            self.is_leaf,
-            self.stack_args_size(sigs),
-            total_stacksize,
-            self.outgoing_args_size,
-        ));
-    }
-
-    /// Generate a prologue, post-regalloc.
-    ///
-    /// This should include any stack frame or other setup necessary to use the
-    /// other methods (`load_arg`, `store_retval`, and spillslot accesses.)
-    pub fn gen_prologue(&self) -> SmallInstVec<M::I> {
-        let frame_layout = self.frame_layout.as_ref().unwrap();
-        let mut insts = smallvec![];
-
-        // Set up frame.
-        insts.extend(M::gen_prologue_frame_setup(
-            self.call_conv,
-            &self.flags,
-            &self.isa_flags,
-            &frame_layout,
-        ));
-
-        // The stack limit check needs to cover all the stack adjustments we
-        // might make, up to the next stack limit check in any function we
-        // call. Since this happens after frame setup, the current function's
-        // setup area needs to be accounted for in the caller's stack limit
-        // check, but we need to account for any setup area that our callees
-        // might need. Note that s390x may also use the outgoing args area for
-        // backtrace support even in leaf functions, so that should be accounted
-        // for unconditionally.
-        let total_stacksize = frame_layout.clobber_size
-            + frame_layout.fixed_frame_storage_size
-            + frame_layout.outgoing_args_size
-            + if self.is_leaf {
-                0
-            } else {
-                frame_layout.setup_area_size
-            };
-
-        // Leaf functions with zero stack don't need a stack check if one's
-        // specified, otherwise always insert the stack check.
-        if total_stacksize > 0 || !self.is_leaf {
-            if let Some((reg, stack_limit_load)) = &self.stack_limit {
-                insts.extend(stack_limit_load.clone());
-                self.insert_stack_check(*reg, total_stacksize, &mut insts);
-            }
-
-            let needs_probestack = self
-                .probestack_min_frame
-                .map_or(false, |min_frame| total_stacksize >= min_frame);
-
-            if needs_probestack {
-                match self.flags.probestack_strategy() {
-                    ProbestackStrategy::Inline => {
-                        let guard_size = 1 << self.flags.probestack_size_log2();
-                        M::gen_inline_probestack(
-                            &mut insts,
-                            self.call_conv,
-                            total_stacksize,
-                            guard_size,
-                        )
-                    }
-                    ProbestackStrategy::Outline => M::gen_probestack(&mut insts, total_stacksize),
-                }
-            }
-        }
-
-        // Save clobbered registers.
-        insts.extend(M::gen_clobber_save(
-            self.call_conv,
-            &self.flags,
-            &frame_layout,
-        ));
-
-        // N.B.: "nominal SP", which we use to refer to stackslots and
-        // spillslots, is defined to be equal to the stack pointer at this point
-        // in the prologue.
-        //
-        // If we push any further data onto the stack in the function
-        // body, we emit a virtual-SP adjustment meta-instruction so
-        // that the nominal SP references behave as if SP were still
-        // at this point. See documentation for
-        // [crate::machinst::abi](this module) for more details
-        // on stackframe layout and nominal SP maintenance.
-
-        insts
-    }
-
-    /// Generate an epilogue, post-regalloc.
-    ///
-    /// Note that this must generate the actual return instruction (rather than
-    /// emitting this in the lowering logic), because the epilogue code comes
-    /// before the return and the two are likely closely related.
-    pub fn gen_epilogue(&self) -> SmallInstVec<M::I> {
-        let frame_layout = self.frame_layout.as_ref().unwrap();
-        let mut insts = smallvec![];
-
-        // Restore clobbered registers.
-        insts.extend(M::gen_clobber_restore(
-            self.call_conv,
-            &self.flags,
-            &frame_layout,
-        ));
-
-        // N.B.: we do *not* emit a nominal SP adjustment here, because (i) there will be no
-        // references to nominal SP offsets before the return below, and (ii) the instruction
-        // emission tracks running SP offset linearly (in straight-line order), not according to
-        // the CFG, so early returns in the middle of function bodies would cause an incorrect
-        // offset for the rest of the body.
-
-        // Tear down frame and return.
-        insts.extend(M::gen_epilogue_frame_restore(
-            self.call_conv,
-            &self.flags,
-            &self.isa_flags,
-            &frame_layout,
-        ));
-
-        trace!("Epilogue: {:?}", insts);
-        insts
-    }
-
-    /// Returns the full frame size for the given function, after prologue
-    /// emission has run. This comprises the spill slots and stack-storage
-    /// slots as well as storage for clobbered callee-save registers, but
-    /// not arguments arguments pushed at callsites within this function,
-    /// or other ephemeral pushes.
-    pub fn frame_size(&self) -> u32 {
-        let frame_layout = self
-            .frame_layout
-            .as_ref()
-            .expect("frame size not computed before prologue generation");
-        frame_layout.clobber_size + frame_layout.fixed_frame_storage_size
-    }
-
-    /// Returns offset from the nominal SP to caller's SP.
-    pub fn nominal_sp_to_caller_sp_offset(&self) -> u32 {
-        let frame_layout = self
-            .frame_layout
-            .as_ref()
-            .expect("frame size not computed before prologue generation");
-        frame_layout.clobber_size
-            + frame_layout.fixed_frame_storage_size
-            + frame_layout.setup_area_size
-    }
-
-    /// Returns the size of arguments expected on the stack.
-    pub fn stack_args_size(&self, sigs: &SigSet) -> u32 {
-        sigs[self.sig].sized_stack_arg_space
-    }
-
-    /// Get the spill-slot size.
-    pub fn get_spillslot_size(&self, rc: RegClass) -> u32 {
-        let max = if self.dynamic_type_sizes.len() == 0 {
-            16
-        } else {
-            *self
-                .dynamic_type_sizes
-                .iter()
-                .max_by(|x, y| x.1.cmp(&y.1))
-                .map(|(_k, v)| v)
-                .unwrap()
-        };
-        M::get_number_of_spillslots_for_value(rc, max, &self.isa_flags)
-    }
-
-    /// Get the spill slot offset relative to nominal SP.
-    pub fn get_spillslot_offset(&self, slot: SpillSlot) -> i64 {
-        // Offset from beginning of spillslot area, which is at nominal SP + stackslots_size.
-        let islot = slot.index() as i64;
-        let spill_off = islot * M::word_bytes() as i64;
-        let sp_off = self.stackslots_size as i64 + spill_off;
-
-        sp_off
-    }
-
-    /// Generate a spill.
-    pub fn gen_spill(&self, to_slot: SpillSlot, from_reg: RealReg) -> M::I {
-        let ty = M::I::canonical_type_for_rc(Reg::from(from_reg).class());
-        self.store_spillslot(to_slot, ty, ValueRegs::one(Reg::from(from_reg)))
-            .into_iter()
-            .next()
-            .unwrap()
-    }
-
-    /// Generate a reload (fill).
-    pub fn gen_reload(&self, to_reg: Writable<RealReg>, from_slot: SpillSlot) -> M::I {
-        let ty = M::I::canonical_type_for_rc(to_reg.to_reg().class());
-        self.load_spillslot(
-            from_slot,
-            ty,
-            writable_value_regs(ValueRegs::one(Reg::from(to_reg.to_reg()))),
-        )
-        .into_iter()
-        .next()
-        .unwrap()
-    }
-}
-
-/// An input argument to a call instruction: the vreg that is used,
-/// and the preg it is constrained to (per the ABI).
-#[derive(Clone, Debug)]
-pub struct CallArgPair {
-    /// The virtual register to use for the argument.
-    pub vreg: Reg,
-    /// The real register into which the arg goes.
-    pub preg: Reg,
-}
-
-/// An output return value from a call instruction: the vreg that is
-/// defined, and the preg it is constrained to (per the ABI).
-#[derive(Clone, Debug)]
-pub struct CallRetPair {
-    /// The virtual register to define from this return value.
-    pub vreg: Writable<Reg>,
-    /// The real register from which the return value is read.
-    pub preg: Reg,
-}
-
-pub type CallArgList = SmallVec<[CallArgPair; 8]>;
-pub type CallRetList = SmallVec<[CallRetPair; 8]>;
-
-/// ABI object for a callsite.
-pub struct CallSite<M: ABIMachineSpec> {
-    /// The called function's signature.
-    sig: Sig,
-    /// All register uses for the callsite, i.e., function args, with
-    /// VReg and the physical register it is constrained to.
-    uses: CallArgList,
-    /// All defs for the callsite, i.e., return values.
-    defs: CallRetList,
-    /// Caller-save clobbers.
-    clobbers: PRegSet,
-    /// Call destination.
-    dest: CallDest,
-    /// Actual call opcode; used to distinguish various types of calls.
-    opcode: ir::Opcode,
-    /// Caller's calling convention.
-    caller_conv: isa::CallConv,
-    /// The settings controlling this compilation.
-    flags: settings::Flags,
-
-    _mach: PhantomData<M>,
-}
-
-/// Destination for a call.
-#[derive(Debug, Clone)]
-pub enum CallDest {
-    /// Call to an ExtName (named function symbol).
-    ExtName(ir::ExternalName, RelocDistance),
-    /// Indirect call to a function pointer in a register.
-    Reg(Reg),
-}
-
-impl<M: ABIMachineSpec> CallSite<M> {
-    /// Create a callsite ABI object for a call directly to the specified function.
-    pub fn from_func(
-        sigs: &SigSet,
-        sig_ref: ir::SigRef,
-        extname: &ir::ExternalName,
-        dist: RelocDistance,
-        caller_conv: isa::CallConv,
-        flags: settings::Flags,
-    ) -> CallSite<M> {
-        let sig = sigs.abi_sig_for_sig_ref(sig_ref);
-        let clobbers = sigs.call_clobbers::<M>(sig);
-        CallSite {
-            sig,
-            uses: smallvec![],
-            defs: smallvec![],
-            clobbers,
-            dest: CallDest::ExtName(extname.clone(), dist),
-            opcode: ir::Opcode::Call,
-            caller_conv,
-            flags,
-            _mach: PhantomData,
-        }
-    }
-
-    /// Create a callsite ABI object for a call directly to the specified
-    /// libcall.
-    pub fn from_libcall(
-        sigs: &SigSet,
-        sig: &ir::Signature,
-        extname: &ir::ExternalName,
-        dist: RelocDistance,
-        caller_conv: isa::CallConv,
-        flags: settings::Flags,
-    ) -> CallSite<M> {
-        let sig = sigs.abi_sig_for_signature(sig);
-        let clobbers = sigs.call_clobbers::<M>(sig);
-        CallSite {
-            sig,
-            uses: smallvec![],
-            defs: smallvec![],
-            clobbers,
-            dest: CallDest::ExtName(extname.clone(), dist),
-            opcode: ir::Opcode::Call,
-            caller_conv,
-            flags,
-            _mach: PhantomData,
-        }
-    }
-
-    /// Create a callsite ABI object for a call to a function pointer with the
-    /// given signature.
-    pub fn from_ptr(
-        sigs: &SigSet,
-        sig_ref: ir::SigRef,
-        ptr: Reg,
-        opcode: ir::Opcode,
-        caller_conv: isa::CallConv,
-        flags: settings::Flags,
-    ) -> CallSite<M> {
-        let sig = sigs.abi_sig_for_sig_ref(sig_ref);
-        let clobbers = sigs.call_clobbers::<M>(sig);
-        CallSite {
-            sig,
-            uses: smallvec![],
-            defs: smallvec![],
-            clobbers,
-            dest: CallDest::Reg(ptr),
-            opcode,
-            caller_conv,
-            flags,
-            _mach: PhantomData,
-        }
-    }
-
-    pub(crate) fn dest(&self) -> &CallDest {
-        &self.dest
-    }
-
-    pub(crate) fn opcode(&self) -> ir::Opcode {
-        self.opcode
-    }
-
-    pub(crate) fn take_uses(self) -> CallArgList {
-        self.uses
-    }
-}
-
-fn adjust_stack_and_nominal_sp<M: ABIMachineSpec>(ctx: &mut Lower<M::I>, amount: i32) {
-    if amount == 0 {
-        return;
-    }
-    for inst in M::gen_sp_reg_adjust(amount) {
-        ctx.emit(inst);
-    }
-    ctx.emit(M::gen_nominal_sp_adj(-amount));
-}
-
-impl<M: ABIMachineSpec> CallSite<M> {
-    /// Get the number of arguments expected.
-    pub fn num_args(&self, sigs: &SigSet) -> usize {
-        sigs.num_args(self.sig)
-    }
-
-    /// Allocate space for building a `return_call`'s temporary frame before we
-    /// copy it over the current frame.
-    pub fn emit_allocate_tail_call_frame(&self, ctx: &mut Lower<M::I>) -> u32 {
-        // The necessary stack space is:
-        //
-        //     sizeof(callee_sig.stack_args)
-        //
-        // Note that any stack return space conceptually belongs to our caller
-        // and the function we are tail calling to has the same return type and
-        // will reuse that stack return space.
-        //
-        // The return address is pushed later on, after the stack arguments are
-        // filled in.
-        let frame_size = ctx.sigs()[self.sig].sized_stack_arg_space;
-
-        let adjustment = -i32::try_from(frame_size).unwrap();
-        adjust_stack_and_nominal_sp::<M>(ctx, adjustment);
-
-        frame_size
-    }
-
-    /// Emit code to pre-adjust the stack, prior to argument copies and call.
-    pub fn emit_stack_pre_adjust(&self, ctx: &mut Lower<M::I>) {
-        let sig = &ctx.sigs()[self.sig];
-        let stack_space = sig.sized_stack_arg_space + sig.sized_stack_ret_space;
-        let stack_space = i32::try_from(stack_space).unwrap();
-        adjust_stack_and_nominal_sp::<M>(ctx, -stack_space);
-    }
-
-    /// Emit code to post-adjust the stack, after call return and return-value copies.
-    pub fn emit_stack_post_adjust(&self, ctx: &mut Lower<M::I>) {
-        let sig = &ctx.sigs()[self.sig];
-
-        let stack_space = if sig.call_conv() == isa::CallConv::Tail {
-            // The "tail" calling convention has callees clean up stack
-            // arguments, not callers. Callers still clean up any stack return
-            // space, however.
-            sig.sized_stack_ret_space
-        } else {
-            sig.sized_stack_arg_space + sig.sized_stack_ret_space
-        };
-        let stack_space = i32::try_from(stack_space).unwrap();
-
-        adjust_stack_and_nominal_sp::<M>(ctx, stack_space);
-    }
-
-    /// Emit a copy of a large argument into its associated stack buffer, if
-    /// any.  We must be careful to perform all these copies (as necessary)
-    /// before setting up the argument registers, since we may have to invoke
-    /// memcpy(), which could clobber any registers already set up.  The
-    /// back-end should call this routine for all arguments before calling
-    /// `gen_arg` for all arguments.
-    pub fn emit_copy_regs_to_buffer(
-        &self,
-        ctx: &mut Lower<M::I>,
-        idx: usize,
-        from_regs: ValueRegs<Reg>,
-    ) {
-        match &ctx.sigs().args(self.sig)[idx] {
-            &ABIArg::Slots { .. } | &ABIArg::ImplicitPtrArg { .. } => {}
-            &ABIArg::StructArg { offset, size, .. } => {
-                let src_ptr = from_regs.only_reg().unwrap();
-                let dst_ptr = ctx.alloc_tmp(M::word_type()).only_reg().unwrap();
-                ctx.emit(M::gen_get_stack_addr(
-                    StackAMode::SPOffset(offset, I8),
-                    dst_ptr,
-                    I8,
-                ));
-                // Emit a memcpy from `src_ptr` to `dst_ptr` of `size` bytes.
-                // N.B.: because we process StructArg params *first*, this is
-                // safe w.r.t. clobbers: we have not yet filled in any other
-                // arg regs.
-                let memcpy_call_conv =
-                    isa::CallConv::for_libcall(&self.flags, ctx.sigs()[self.sig].call_conv);
-                for insn in M::gen_memcpy(
-                    memcpy_call_conv,
-                    dst_ptr.to_reg(),
-                    src_ptr,
-                    size as usize,
-                    |ty| ctx.alloc_tmp(ty).only_reg().unwrap(),
-                )
-                .into_iter()
-                {
-                    ctx.emit(insn);
-                }
-            }
-        }
-    }
-
-    /// Add a constraint for an argument value from a source register.
-    /// For large arguments with associated stack buffer, this may
-    /// load the address of the buffer into the argument register, if
-    /// required by the ABI.
-    pub fn gen_arg(
-        &mut self,
-        ctx: &mut Lower<M::I>,
-        idx: usize,
-        from_regs: ValueRegs<Reg>,
-    ) -> SmallInstVec<M::I> {
-        let mut insts = smallvec![];
-        let word_rc = M::word_reg_class();
-        let word_bits = M::word_bits() as usize;
-
-        // How many temps do we need for extends? Allocate them ahead
-        // of time, since we can't do it while we're iterating over
-        // the sig and immutably borrowing `ctx`.
-        let needed_tmps = match &ctx.sigs().args(self.sig)[idx] {
-            &ABIArg::Slots { ref slots, .. } => slots
-                .iter()
-                .map(|slot| match slot {
-                    &ABIArgSlot::Reg { extension, .. }
-                        if extension != ir::ArgumentExtension::None =>
-                    {
-                        1
-                    }
-                    &ABIArgSlot::Reg { ty, .. } if ty.is_ref() => 1,
-                    &ABIArgSlot::Reg { .. } => 0,
-                    &ABIArgSlot::Stack { extension, .. }
-                        if extension != ir::ArgumentExtension::None =>
-                    {
-                        1
-                    }
-                    &ABIArgSlot::Stack { .. } => 0,
-                })
-                .sum(),
-            ABIArg::ImplicitPtrArg { .. } => 1,
-            _ => 0,
-        };
-        let mut temps: SmallVec<[Writable<Reg>; 16]> = (0..needed_tmps)
-            .map(|_| ctx.alloc_tmp(M::word_type()).only_reg().unwrap())
-            .collect();
-
-        match &ctx.sigs().args(self.sig)[idx] {
-            &ABIArg::Slots { ref slots, .. } => {
-                assert_eq!(from_regs.len(), slots.len());
-                for (slot, from_reg) in slots.iter().zip(from_regs.regs().iter()) {
-                    match slot {
-                        &ABIArgSlot::Reg {
-                            reg, ty, extension, ..
-                        } => {
-                            let ext = M::get_ext_mode(ctx.sigs()[self.sig].call_conv, extension);
-                            if ext != ir::ArgumentExtension::None && ty_bits(ty) < word_bits {
-                                assert_eq!(word_rc, reg.class());
-                                let signed = match ext {
-                                    ir::ArgumentExtension::Uext => false,
-                                    ir::ArgumentExtension::Sext => true,
-                                    _ => unreachable!(),
-                                };
-                                let extend_result =
-                                    temps.pop().expect("Must have allocated enough temps");
-                                insts.push(M::gen_extend(
-                                    extend_result,
-                                    *from_reg,
-                                    signed,
-                                    ty_bits(ty) as u8,
-                                    word_bits as u8,
-                                ));
-                                self.uses.push(CallArgPair {
-                                    vreg: extend_result.to_reg(),
-                                    preg: reg.into(),
-                                });
-                            } else if ty.is_ref() {
-                                // Reference-typed args need to be
-                                // passed as a copy; the original vreg
-                                // is constrained to the stack and
-                                // this copy is in a reg.
-                                let ref_copy =
-                                    temps.pop().expect("Must have allocated enough temps");
-                                insts.push(M::gen_move(ref_copy, *from_reg, M::word_type()));
-                                self.uses.push(CallArgPair {
-                                    vreg: ref_copy.to_reg(),
-                                    preg: reg.into(),
-                                });
-                            } else {
-                                self.uses.push(CallArgPair {
-                                    vreg: *from_reg,
-                                    preg: reg.into(),
-                                });
-                            }
-                        }
-                        &ABIArgSlot::Stack {
-                            offset,
-                            ty,
-                            extension,
-                            ..
-                        } => {
-                            let ext = M::get_ext_mode(ctx.sigs()[self.sig].call_conv, extension);
-                            let (data, ty) =
-                                if ext != ir::ArgumentExtension::None && ty_bits(ty) < word_bits {
-                                    assert_eq!(word_rc, from_reg.class());
-                                    let signed = match ext {
-                                        ir::ArgumentExtension::Uext => false,
-                                        ir::ArgumentExtension::Sext => true,
-                                        _ => unreachable!(),
-                                    };
-                                    let extend_result =
-                                        temps.pop().expect("Must have allocated enough temps");
-                                    insts.push(M::gen_extend(
-                                        extend_result,
-                                        *from_reg,
-                                        signed,
-                                        ty_bits(ty) as u8,
-                                        word_bits as u8,
-                                    ));
-                                    // Store the extended version.
-                                    (extend_result.to_reg(), M::word_type())
-                                } else {
-                                    (*from_reg, ty)
-                                };
-                            insts.push(M::gen_store_stack(
-                                StackAMode::SPOffset(offset, ty),
-                                data,
-                                ty,
-                            ));
-                        }
-                    }
-                }
-            }
-            &ABIArg::StructArg { pointer, .. } => {
-                assert!(pointer.is_none()); // Only supported via ISLE.
-            }
-            &ABIArg::ImplicitPtrArg {
-                offset,
-                pointer,
-                ty,
-                purpose: _,
-            } => {
-                assert_eq!(from_regs.len(), 1);
-                let vreg = from_regs.regs()[0];
-                let amode = StackAMode::SPOffset(offset, ty);
-                let tmp = temps[0];
-                insts.push(M::gen_get_stack_addr(amode, tmp, ty));
-                let tmp = tmp.to_reg();
-                insts.push(M::gen_store_base_offset(tmp, 0, vreg, ty));
-                match pointer {
-                    ABIArgSlot::Reg { reg, .. } => {
-                        self.uses.push(CallArgPair {
-                            vreg: tmp,
-                            preg: reg.into(),
-                        });
-                    }
-                    ABIArgSlot::Stack { offset, .. } => {
-                        let ty = M::word_type();
-                        insts.push(M::gen_store_stack(
-                            StackAMode::SPOffset(offset, ty),
-                            tmp,
-                            ty,
-                        ));
-                    }
-                };
-            }
-        }
-        insts
-    }
-
-    /// Call `gen_arg` for each non-hidden argument and emit all instructions
-    /// generated.
-    pub fn emit_args(&mut self, ctx: &mut Lower<M::I>, (inputs, off): isle::ValueSlice) {
-        let num_args = self.num_args(ctx.sigs());
-        assert_eq!(inputs.len(&ctx.dfg().value_lists) - off, num_args);
-
-        let mut arg_value_regs: SmallVec<[_; 16]> = smallvec![];
-        for i in 0..num_args {
-            let input = inputs.get(off + i, &ctx.dfg().value_lists).unwrap();
-            arg_value_regs.push(ctx.put_value_in_regs(input));
-        }
-        for (i, arg_regs) in arg_value_regs.iter().enumerate() {
-            self.emit_copy_regs_to_buffer(ctx, i, *arg_regs);
-        }
-        for (i, value_regs) in arg_value_regs.iter().enumerate() {
-            for inst in self.gen_arg(ctx, i, *value_regs) {
-                ctx.emit(inst);
-            }
-        }
-    }
-
-    /// Emit the code to forward a stack-return pointer argument through a tail
-    /// call.
-    pub fn emit_stack_ret_arg_for_tail_call(&mut self, ctx: &mut Lower<M::I>) {
-        if let Some(i) = ctx.sigs()[self.sig].stack_ret_arg() {
-            let ret_area_ptr = ctx.abi().ret_area_ptr.expect(
-                "if the tail callee has a return pointer, then the tail caller \
-                 must as well",
-            );
-            for inst in self.gen_arg(ctx, i.into(), ValueRegs::one(ret_area_ptr.to_reg())) {
-                ctx.emit(inst);
-            }
-        }
-    }
-
-    /// Builds a new temporary callee frame for the tail call and puts arguments into
-    /// registers and stack slots (within the new temporary frame).
-    ///
-    /// It is the caller's responsibility to move the temporary callee frame on
-    /// top of the current caller frame before performing the actual tail call.
-    ///
-    /// Returns a pair of the old caller's stack argument size and the new
-    /// callee's stack argument size.
-    pub fn emit_temporary_tail_call_frame(
-        &mut self,
-        ctx: &mut Lower<M::I>,
-        args: isle::ValueSlice,
-    ) -> (u32, u32) {
-        // Allocate additional stack space for the new stack frame. We will
-        // build it in the newly allocated space, but then copy it over our
-        // current frame at the last moment.
-        let new_stack_arg_size = self.emit_allocate_tail_call_frame(ctx);
-        let old_stack_arg_size = ctx.abi().stack_args_size(ctx.sigs());
-
-        // Put all arguments in registers and stack slots (within that newly
-        // allocated stack space).
-        self.emit_args(ctx, args);
-        self.emit_stack_ret_arg_for_tail_call(ctx);
-
-        (new_stack_arg_size, old_stack_arg_size)
-    }
-
-    /// Define a return value after the call returns.
-    pub fn gen_retval(
-        &mut self,
-        ctx: &Lower<M::I>,
-        idx: usize,
-        into_regs: ValueRegs<Writable<Reg>>,
-    ) -> SmallInstVec<M::I> {
-        let mut insts = smallvec![];
-        match &ctx.sigs().rets(self.sig)[idx] {
-            &ABIArg::Slots { ref slots, .. } => {
-                assert_eq!(into_regs.len(), slots.len());
-                for (slot, into_reg) in slots.iter().zip(into_regs.regs().iter()) {
-                    match slot {
-                        // Extension mode doesn't matter because we're copying out, not in,
-                        // and we ignore high bits in our own registers by convention.
-                        &ABIArgSlot::Reg { reg, .. } => {
-                            self.defs.push(CallRetPair {
-                                vreg: *into_reg,
-                                preg: reg.into(),
-                            });
-                        }
-                        &ABIArgSlot::Stack { offset, ty, .. } => {
-                            let sig_data = &ctx.sigs()[self.sig];
-                            let ret_area_base = if sig_data.call_conv() == isa::CallConv::Tail {
-                                // The callee already popped the stack argument
-                                // space for us, so the return area is on top of
-                                // the stack.
-                                0
-                            } else {
-                                // The return area is just below the stack
-                                // argument area on the stack.
-                                sig_data.sized_stack_arg_space()
-                            };
-                            insts.push(M::gen_load_stack(
-                                StackAMode::SPOffset(offset + ret_area_base, ty),
-                                *into_reg,
-                                ty,
-                            ));
-                        }
-                    }
-                }
-            }
-            &ABIArg::StructArg { .. } => {
-                panic!("StructArg not supported in return position");
-            }
-            &ABIArg::ImplicitPtrArg { .. } => {
-                panic!("ImplicitPtrArg not supported in return position");
-            }
-        }
-        insts
-    }
-
-    /// Emit the call itself.
-    ///
-    /// The returned instruction should have proper use- and def-sets according
-    /// to the argument registers, return-value registers, and clobbered
-    /// registers for this function signature in this ABI.
-    ///
-    /// (Arg registers are uses, and retval registers are defs. Clobbered
-    /// registers are also logically defs, but should never be read; their
-    /// values are "defined" (to the regalloc) but "undefined" in every other
-    /// sense.)
-    ///
-    /// This function should only be called once, as it is allowed to re-use
-    /// parts of the `CallSite` object in emitting instructions.
-    pub fn emit_call(&mut self, ctx: &mut Lower<M::I>) {
-        let word_type = M::word_type();
-        if let Some(i) = ctx.sigs()[self.sig].stack_ret_arg {
-            let rd = ctx.alloc_tmp(word_type).only_reg().unwrap();
-            let ret_area_base = ctx.sigs()[self.sig].sized_stack_arg_space();
-            ctx.emit(M::gen_get_stack_addr(
-                StackAMode::SPOffset(ret_area_base, I8),
-                rd,
-                I8,
-            ));
-            for inst in self.gen_arg(ctx, i.into(), ValueRegs::one(rd.to_reg())) {
-                ctx.emit(inst);
-            }
-        }
-
-        let (uses, defs) = (
-            mem::replace(&mut self.uses, Default::default()),
-            mem::replace(&mut self.defs, Default::default()),
-        );
-
-        let sig = &ctx.sigs()[self.sig];
-        let callee_pop_size = if sig.call_conv() == isa::CallConv::Tail {
-            // The tail calling convention has callees pop stack arguments.
-            sig.sized_stack_arg_space
-        } else {
-            0
-        };
-
-        let tmp = ctx.alloc_tmp(word_type).only_reg().unwrap();
-        for inst in M::gen_call(
-            &self.dest,
-            uses,
-            defs,
-            self.clobbers,
-            self.opcode,
-            tmp,
-            ctx.sigs()[self.sig].call_conv,
-            self.caller_conv,
-            callee_pop_size,
-        )
-        .into_iter()
-        {
-            ctx.emit(inst);
-        }
-    }
-}
-
-#[cfg(test)]
-mod tests {
-    use super::SigData;
-
-    #[test]
-    fn sig_data_size() {
-        // The size of `SigData` is performance sensitive, so make sure
-        // we don't regress it unintentionally.
-        assert_eq!(std::mem::size_of::<SigData>(), 24);
-    }
-}