wasmtime 12.0.1 → 13.0.0

data/ext/cargo-vendor/wasmtime-12.0.1/src/store.rs

@@ -1,2212 +0,0 @@
-//! Wasmtime's "store" type
-//!
-//! This module, and its submodules, contain the `Store` type and various types
-//! used to interact with it. At first glance this is a pretty confusing module
-//! where you need to know the difference between:
-//!
-//! * `Store<T>`
-//! * `StoreContext<T>`
-//! * `StoreContextMut<T>`
-//! * `AsContext`
-//! * `AsContextMut`
-//! * `StoreInner<T>`
-//! * `StoreOpaque`
-//! * `StoreData`
-//!
-//! There's... quite a lot going on here, and it's easy to be confused. This
-//! comment is ideally going to serve the purpose of clarifying what all these
-//! types are for and why they're motivated.
-//!
-//! First it's important to know what's "internal" and what's "external". Almost
-//! everything above is defined as `pub`, but only some of the items are
-//! reexported to the outside world to be usable from this crate. Otherwise all
-//! items are `pub` within this `store` module, and the `store` module is
-//! private to the `wasmtime` crate. Notably `Store<T>`, `StoreContext<T>`,
-//! `StoreContextMut<T>`, `AsContext`, and `AsContextMut` are all public
-//! interfaces to the `wasmtime` crate. You can think of these as:
-//!
-//! * `Store<T>` - an owned reference to a store, the "root of everything"
-//! * `StoreContext<T>` - basically `&StoreInner<T>`
-//! * `StoreContextMut<T>` - more-or-less `&mut StoreInner<T>` with caveats.
-//!   Explained later.
-//! * `AsContext` - similar to `AsRef`, but produces `StoreContext<T>`
-//! * `AsContextMut` - similar to `AsMut`, but produces `StoreContextMut<T>`
-//!
-//! Next comes the internal structure of the `Store<T>` itself. This looks like:
-//!
-//! * `Store<T>` - this type is just a pointer large. It's primarily just
-//!   intended to be consumed by the outside world. Note that the "just a
-//!   pointer large" is a load-bearing implementation detail in Wasmtime. This
-//!   enables it to store a pointer to its own trait object which doesn't need
-//!   to change over time.
-//!
-//! * `StoreInner<T>` - the first layer of the contents of a `Store<T>`, what's
-//!   stored inside the `Box`. This is the general Rust pattern when one struct
-//!   is a layer over another. The surprising part, though, is that this is
-//!   further subdivided. This structure only contains things which actually
-//!   need `T` itself. The downside of this structure is that it's always
-//!   generic and means that code is monomorphized into consumer crates. We
-//!   strive to have things be as monomorphic as possible in `wasmtime` so this
-//!   type is not heavily used.
-//!
-//! * `StoreOpaque` - this is the primary contents of the `StoreInner<T>` type.
-//!   Stored inline in the outer type the "opaque" here means that it's a
-//!   "store" but it doesn't have access to the `T`. This is the primary
-//!   "internal" reference that Wasmtime uses since `T` is rarely needed by the
-//!   internals of Wasmtime.
-//!
-//! * `StoreData` - this is a final helper struct stored within `StoreOpaque`.
-//!   All references of Wasm items into a `Store` are actually indices into a
-//!   table in this structure, and the `StoreData` being separate makes it a bit
-//!   easier to manage/define/work with. There's no real fundamental reason this
-//!   is split out, although sometimes it's useful to have separate borrows into
-//!   these tables than the `StoreOpaque`.
-//!
-//! A major caveat with these representations is that the internal `&mut
-//! StoreInner<T>` is never handed out publicly to consumers of this crate, only
-//! through a wrapper of `StoreContextMut<'_, T>`. The reason for this is that
-//! we want to provide mutable, but not destructive, access to the contents of a
-//! `Store`. For example if a `StoreInner<T>` were replaced with some other
-//! `StoreInner<T>` then that would drop live instances, possibly those
-//! currently executing beneath the current stack frame. This would not be a
-//! safe operation.
-//!
-//! This means, though, that the `wasmtime` crate, which liberally uses `&mut
-//! StoreOpaque` internally, has to be careful to never actually destroy the
-//! contents of `StoreOpaque`. This is an invariant that we, as the authors of
-//! `wasmtime`, must uphold for the public interface to be safe.
-
-use crate::instance::InstanceData;
-use crate::linker::Definition;
-use crate::module::BareModuleInfo;
-use crate::trampoline::VMHostGlobalContext;
-use crate::{module::ModuleRegistry, Engine, Module, Trap, Val, ValRaw};
-use crate::{Global, Instance, Memory};
-use anyhow::{anyhow, bail, Result};
-use std::cell::UnsafeCell;
-use std::convert::TryFrom;
-use std::fmt;
-use std::future::Future;
-use std::marker;
-use std::mem::{self, ManuallyDrop};
-use std::ops::{Deref, DerefMut};
-use std::pin::Pin;
-use std::ptr;
-use std::sync::atomic::AtomicU64;
-use std::sync::Arc;
-use std::task::{Context, Poll};
-use wasmtime_runtime::{
-    ExportGlobal, ExportMemory, InstanceAllocationRequest, InstanceAllocator, InstanceHandle,
-    ModuleInfo, OnDemandInstanceAllocator, SignalHandler, StoreBox, StorePtr, VMContext,
-    VMExternRef, VMExternRefActivationsTable, VMFuncRef, VMRuntimeLimits, WasmFault,
-};
-
-mod context;
-pub use self::context::*;
-mod data;
-pub use self::data::*;
-mod func_refs;
-use func_refs::FuncRefs;
-
-/// A [`Store`] is a collection of WebAssembly instances and host-defined state.
-///
-/// All WebAssembly instances and items will be attached to and refer to a
-/// [`Store`]. For example instances, functions, globals, and tables are all
-/// attached to a [`Store`]. Instances are created by instantiating a
-/// [`Module`](crate::Module) within a [`Store`].
-///
-/// A [`Store`] is intended to be a short-lived object in a program. No form
-/// of GC is implemented at this time so once an instance is created within a
-/// [`Store`] it will not be deallocated until the [`Store`] itself is dropped.
-/// This makes [`Store`] unsuitable for creating an unbounded number of
-/// instances in it because [`Store`] will never release this memory. It's
-/// recommended to have a [`Store`] correspond roughly to the lifetime of a "main
-/// instance" that an embedding is interested in executing.
-///
-/// ## Type parameter `T`
-///
-/// Each [`Store`] has a type parameter `T` associated with it. This `T`
-/// represents state defined by the host. This state will be accessible through
-/// the [`Caller`](crate::Caller) type that host-defined functions get access
-/// to. This `T` is suitable for storing `Store`-specific information which
-/// imported functions may want access to.
-///
-/// The data `T` can be accessed through methods like [`Store::data`] and
-/// [`Store::data_mut`].
-///
-/// ## Stores, contexts, oh my
-///
-/// Most methods in Wasmtime take something of the form
-/// [`AsContext`](crate::AsContext) or [`AsContextMut`](crate::AsContextMut) as
-/// the first argument. These two traits allow ergonomically passing in the
-/// context you currently have to any method. The primary two sources of
-/// contexts are:
-///
-/// * `Store<T>`
-/// * `Caller<'_, T>`
-///
-/// corresponding to what you create and what you have access to in a host
-/// function. You can also explicitly acquire a [`StoreContext`] or
-/// [`StoreContextMut`] and pass that around as well.
-///
-/// Note that all methods on [`Store`] are mirrored onto [`StoreContext`],
-/// [`StoreContextMut`], and [`Caller`](crate::Caller). This way no matter what
-/// form of context you have you can call various methods, create objects, etc.
-///
-/// ## Stores and `Default`
-///
-/// You can create a store with default configuration settings using
-/// `Store::default()`. This will create a brand new [`Engine`] with default
-/// configuration (see [`Config`](crate::Config) for more information).
-pub struct Store<T> {
-    // for comments about `ManuallyDrop`, see `Store::into_data`
-    inner: ManuallyDrop<Box<StoreInner<T>>>,
-}
-
-#[derive(Copy, Clone, Debug)]
-/// Passed to the argument of [`Store::call_hook`] to indicate a state transition in
-/// the WebAssembly VM.
-pub enum CallHook {
-    /// Indicates the VM is calling a WebAssembly function, from the host.
-    CallingWasm,
-    /// Indicates the VM is returning from a WebAssembly function, to the host.
-    ReturningFromWasm,
-    /// Indicates the VM is calling a host function, from WebAssembly.
-    CallingHost,
-    /// Indicates the VM is returning from a host function, to WebAssembly.
-    ReturningFromHost,
-}
-
-impl CallHook {
-    /// Indicates the VM is entering host code (exiting WebAssembly code)
-    pub fn entering_host(&self) -> bool {
-        match self {
-            CallHook::ReturningFromWasm | CallHook::CallingHost => true,
-            _ => false,
-        }
-    }
-    /// Indicates the VM is exiting host code (entering WebAssembly code)
-    pub fn exiting_host(&self) -> bool {
-        match self {
-            CallHook::ReturningFromHost | CallHook::CallingWasm => true,
-            _ => false,
-        }
-    }
-}
-
-/// Internal contents of a `Store<T>` that live on the heap.
-///
-/// The members of this struct are those that need to be generic over `T`, the
-/// store's internal type storage. Otherwise all things that don't rely on `T`
-/// should go into `StoreOpaque`.
-pub struct StoreInner<T> {
-    /// Generic metadata about the store that doesn't need access to `T`.
-    inner: StoreOpaque,
-
-    limiter: Option<ResourceLimiterInner<T>>,
-    call_hook: Option<CallHookInner<T>>,
-    epoch_deadline_behavior:
-        Option<Box<dyn FnMut(StoreContextMut<T>) -> Result<UpdateDeadline> + Send + Sync>>,
-    // for comments about `ManuallyDrop`, see `Store::into_data`
-    data: ManuallyDrop<T>,
-}
-
-enum ResourceLimiterInner<T> {
-    Sync(Box<dyn FnMut(&mut T) -> &mut (dyn crate::ResourceLimiter) + Send + Sync>),
-    #[cfg(feature = "async")]
-    Async(Box<dyn FnMut(&mut T) -> &mut (dyn crate::ResourceLimiterAsync) + Send + Sync>),
-}
-
-/// An object that can take callbacks when the runtime enters or exits hostcalls.
-#[cfg(feature = "async")]
-#[async_trait::async_trait]
-pub trait CallHookHandler<T>: Send {
-    /// A callback to run when wasmtime is about to enter a host call, or when about to
-    /// exit the hostcall.
-    async fn handle_call_event(&self, t: &mut T, ch: CallHook) -> Result<()>;
-}
-
-enum CallHookInner<T> {
-    Sync(Box<dyn FnMut(&mut T, CallHook) -> Result<()> + Send + Sync>),
-    #[cfg(feature = "async")]
-    Async(Box<dyn CallHookHandler<T> + Send + Sync>),
-}
-
-/// What to do after returning from a callback when the engine epoch reaches
-/// the deadline for a Store during execution of a function using that store.
-pub enum UpdateDeadline {
-    /// Extend the deadline by the specified number of ticks.
-    Continue(u64),
-    /// Extend the deadline by the specified number of ticks after yielding to
-    /// the async executor loop. This can only be used with an async [`Store`]
-    /// configured via [`Config::async_support`](crate::Config::async_support).
-    #[cfg(feature = "async")]
-    Yield(u64),
-}
-
-// Forward methods on `StoreOpaque` to also being on `StoreInner<T>`
-impl<T> Deref for StoreInner<T> {
-    type Target = StoreOpaque;
-    fn deref(&self) -> &Self::Target {
-        &self.inner
-    }
-}
-
-impl<T> DerefMut for StoreInner<T> {
-    fn deref_mut(&mut self) -> &mut Self::Target {
-        &mut self.inner
-    }
-}
-
-/// Monomorphic storage for a `Store<T>`.
-///
-/// This structure contains the bulk of the metadata about a `Store`. This is
-/// used internally in Wasmtime when dependence on the `T` of `Store<T>` isn't
-/// necessary, allowing code to be monomorphic and compiled into the `wasmtime`
-/// crate itself.
-pub struct StoreOpaque {
-    // This `StoreOpaque` structure has references to itself. These aren't
-    // immediately evident, however, so we need to tell the compiler that it
-    // contains self-references. This notably suppresses `noalias` annotations
-    // when this shows up in compiled code because types of this structure do
-    // indeed alias itself. An example of this is `default_callee` holds a
-    // `*mut dyn Store` to the address of this `StoreOpaque` itself, indeed
-    // aliasing!
-    //
-    // It's somewhat unclear to me at this time if this is 100% sufficient to
-    // get all the right codegen in all the right places. For example does
-    // `Store` need to internally contain a `Pin<Box<StoreInner<T>>>`? Do the
-    // contexts need to contain `Pin<&mut StoreInner<T>>`? I'm not familiar
-    // enough with `Pin` to understand if it's appropriate here (we do, for
-    // example want to allow movement in and out of `data: T`, just not movement
-    // of most of the other members). It's also not clear if using `Pin` in a
-    // few places buys us much other than a bunch of `unsafe` that we already
-    // sort of hand-wave away.
-    //
-    // In any case this seems like a good mid-ground for now where we're at
-    // least telling the compiler something about all the aliasing happening
-    // within a `Store`.
-    _marker: marker::PhantomPinned,
-
-    engine: Engine,
-    runtime_limits: VMRuntimeLimits,
-    instances: Vec<StoreInstance>,
-    signal_handler: Option<Box<SignalHandler<'static>>>,
-    externref_activations_table: VMExternRefActivationsTable,
-    modules: ModuleRegistry,
-    func_refs: FuncRefs,
-    host_globals: Vec<StoreBox<VMHostGlobalContext>>,
-
-    // Numbers of resources instantiated in this store, and their limits
-    instance_count: usize,
-    instance_limit: usize,
-    memory_count: usize,
-    memory_limit: usize,
-    table_count: usize,
-    table_limit: usize,
-    /// An adjustment to add to the fuel consumed value in `runtime_limits` above
-    /// to get the true amount of fuel consumed.
-    fuel_adj: i64,
-    #[cfg(feature = "async")]
-    async_state: AsyncState,
-    out_of_gas_behavior: OutOfGas,
-    /// Indexed data within this `Store`, used to store information about
-    /// globals, functions, memories, etc.
-    ///
-    /// Note that this is `ManuallyDrop` because it needs to be dropped before
-    /// `rooted_host_funcs` below. This structure contains pointers which are
-    /// otherwise kept alive by the `Arc` references in `rooted_host_funcs`.
-    store_data: ManuallyDrop<StoreData>,
-    default_caller: InstanceHandle,
-
-    /// Used to optimzed wasm->host calls when the host function is defined with
-    /// `Func::new` to avoid allocating a new vector each time a function is
-    /// called.
-    hostcall_val_storage: Vec<Val>,
-    /// Same as `hostcall_val_storage`, but for the direction of the host
-    /// calling wasm.
-    wasm_val_raw_storage: Vec<ValRaw>,
-
-    /// A list of lists of definitions which have been used to instantiate
-    /// within this `Store`.
-    ///
-    /// Note that not all instantiations end up pushing to this list. At the
-    /// time of this writing only the `InstancePre<T>` type will push to this
-    /// list. Pushes to this list are typically accompanied with
-    /// `HostFunc::to_func_store_rooted` to clone an `Arc` here once which
-    /// preserves a strong reference to the `Arc` for each `HostFunc` stored
-    /// within the list of `Definition`s.
-    ///
-    /// Note that this is `ManuallyDrop` as it must be dropped after
-    /// `store_data` above, where the function pointers are stored.
-    rooted_host_funcs: ManuallyDrop<Vec<Arc<[Definition]>>>,
-
-    /// Runtime state for components used in the handling of resources, borrow,
-    /// and calls. These also interact with the `ResourceAny` type and its
-    /// internal representation.
-    #[cfg(feature = "component-model")]
-    component_host_table: wasmtime_runtime::component::ResourceTable,
-    #[cfg(feature = "component-model")]
-    component_calls: wasmtime_runtime::component::CallContexts,
-}
-
-#[cfg(feature = "async")]
-struct AsyncState {
-    current_suspend: UnsafeCell<*const wasmtime_fiber::Suspend<Result<()>, (), Result<()>>>,
-    current_poll_cx: UnsafeCell<*mut Context<'static>>,
-}
-
-// Lots of pesky unsafe cells and pointers in this structure. This means we need
-// to declare explicitly that we use this in a threadsafe fashion.
-#[cfg(feature = "async")]
-unsafe impl Send for AsyncState {}
-#[cfg(feature = "async")]
-unsafe impl Sync for AsyncState {}
-
-/// An RAII type to automatically mark a region of code as unsafe for GC.
-pub(crate) struct AutoAssertNoGc<T>
-where
-    T: std::ops::DerefMut<Target = StoreOpaque>,
-{
-    #[cfg(debug_assertions)]
-    prev_okay: bool,
-    store: T,
-}
-
-impl<T> AutoAssertNoGc<T>
-where
-    T: std::ops::DerefMut<Target = StoreOpaque>,
-{
-    pub fn new(mut store: T) -> Self {
-        let _ = &mut store;
-        #[cfg(debug_assertions)]
-        {
-            let prev_okay = store.externref_activations_table.set_gc_okay(false);
-            return AutoAssertNoGc { store, prev_okay };
-        }
-        #[cfg(not(debug_assertions))]
-        {
-            return AutoAssertNoGc { store };
-        }
-    }
-}
-
-impl<T> std::ops::Deref for AutoAssertNoGc<T>
-where
-    T: std::ops::DerefMut<Target = StoreOpaque>,
-{
-    type Target = T;
-
-    fn deref(&self) -> &Self::Target {
-        &self.store
-    }
-}
-
-impl<T> std::ops::DerefMut for AutoAssertNoGc<T>
-where
-    T: std::ops::DerefMut<Target = StoreOpaque>,
-{
-    fn deref_mut(&mut self) -> &mut Self::Target {
-        &mut self.store
-    }
-}
-
-impl<T> Drop for AutoAssertNoGc<T>
-where
-    T: std::ops::DerefMut<Target = StoreOpaque>,
-{
-    fn drop(&mut self) {
-        #[cfg(debug_assertions)]
-        {
-            self.store
-                .externref_activations_table
-                .set_gc_okay(self.prev_okay);
-        }
-    }
-}
-
-/// Used to associate instances with the store.
-///
-/// This is needed to track if the instance was allocated explicitly with the on-demand
-/// instance allocator.
-struct StoreInstance {
-    handle: InstanceHandle,
-    // Stores whether or not to use the on-demand allocator to deallocate the instance
-    ondemand: bool,
-}
-
-#[derive(Copy, Clone)]
-enum OutOfGas {
-    Trap,
-    InjectFuel {
-        injection_count: u64,
-        fuel_to_inject: u64,
-    },
-}
-
-impl<T> Store<T> {
-    /// Creates a new [`Store`] to be associated with the given [`Engine`] and
-    /// `data` provided.
-    ///
-    /// The created [`Store`] will place no additional limits on the size of
-    /// linear memories or tables at runtime. Linear memories and tables will
-    /// be allowed to grow to any upper limit specified in their definitions.
-    /// The store will limit the number of instances, linear memories, and
-    /// tables created to 10,000. This can be overridden with the
-    /// [`Store::limiter`] configuration method.
-    pub fn new(engine: &Engine, data: T) -> Self {
-        let mut inner = Box::new(StoreInner {
-            inner: StoreOpaque {
-                _marker: marker::PhantomPinned,
-                engine: engine.clone(),
-                runtime_limits: Default::default(),
-                instances: Vec::new(),
-                signal_handler: None,
-                externref_activations_table: VMExternRefActivationsTable::new(),
-                modules: ModuleRegistry::default(),
-                func_refs: FuncRefs::default(),
-                host_globals: Vec::new(),
-                instance_count: 0,
-                instance_limit: crate::DEFAULT_INSTANCE_LIMIT,
-                memory_count: 0,
-                memory_limit: crate::DEFAULT_MEMORY_LIMIT,
-                table_count: 0,
-                table_limit: crate::DEFAULT_TABLE_LIMIT,
-                fuel_adj: 0,
-                #[cfg(feature = "async")]
-                async_state: AsyncState {
-                    current_suspend: UnsafeCell::new(ptr::null()),
-                    current_poll_cx: UnsafeCell::new(ptr::null_mut()),
-                },
-                out_of_gas_behavior: OutOfGas::Trap,
-                store_data: ManuallyDrop::new(StoreData::new()),
-                default_caller: InstanceHandle::null(),
-                hostcall_val_storage: Vec::new(),
-                wasm_val_raw_storage: Vec::new(),
-                rooted_host_funcs: ManuallyDrop::new(Vec::new()),
-                #[cfg(feature = "component-model")]
-                component_host_table: Default::default(),
-                #[cfg(feature = "component-model")]
-                component_calls: Default::default(),
-            },
-            limiter: None,
-            call_hook: None,
-            epoch_deadline_behavior: None,
-            data: ManuallyDrop::new(data),
-        });
-
-        // Wasmtime uses the callee argument to host functions to learn about
-        // the original pointer to the `Store` itself, allowing it to
-        // reconstruct a `StoreContextMut<T>`. When we initially call a `Func`,
-        // however, there's no "callee" to provide. To fix this we allocate a
-        // single "default callee" for the entire `Store`. This is then used as
-        // part of `Func::call` to guarantee that the `callee: *mut VMContext`
-        // is never null.
-        inner.default_caller = {
-            let module = Arc::new(wasmtime_environ::Module::default());
-            let shim = BareModuleInfo::empty(module).into_traitobj();
-            let mut instance = OnDemandInstanceAllocator::default()
-                .allocate(InstanceAllocationRequest {
-                    host_state: Box::new(()),
-                    imports: Default::default(),
-                    store: StorePtr::empty(),
-                    runtime_info: &shim,
-                })
-                .expect("failed to allocate default callee");
-
-            // Note the erasure of the lifetime here into `'static`, so in
-            // general usage of this trait object must be strictly bounded to
-            // the `Store` itself, and is a variant that we have to maintain
-            // throughout Wasmtime.
-            unsafe {
-                let traitobj = std::mem::transmute::<
-                    *mut (dyn wasmtime_runtime::Store + '_),
-                    *mut (dyn wasmtime_runtime::Store + 'static),
-                >(&mut *inner);
-                instance.set_store(traitobj);
-            }
-            instance
-        };
-
-        Self {
-            inner: ManuallyDrop::new(inner),
-        }
-    }
-
-    /// Access the underlying data owned by this `Store`.
-    #[inline]
-    pub fn data(&self) -> &T {
-        self.inner.data()
-    }
-
-    /// Access the underlying data owned by this `Store`.
-    #[inline]
-    pub fn data_mut(&mut self) -> &mut T {
-        self.inner.data_mut()
-    }
-
-    /// Consumes this [`Store`], destroying it, and returns the underlying data.
-    pub fn into_data(mut self) -> T {
-        // This is an unsafe operation because we want to avoid having a runtime
-        // check or boolean for whether the data is actually contained within a
-        // `Store`. The data itself is stored as `ManuallyDrop` since we're
-        // manually managing the memory here, and there's also a `ManuallyDrop`
-        // around the `Box<StoreInner<T>>`. The way this works though is a bit
-        // tricky, so here's how things get dropped appropriately:
-        //
-        // * When a `Store<T>` is normally dropped, the custom destructor for
-        //   `Store<T>` will drop `T`, then the `self.inner` field. The
-        //   rustc-glue destructor runs for `Box<StoreInner<T>>` which drops
-        //   `StoreInner<T>`. This cleans up all internal fields and doesn't
-        //   touch `T` because it's wrapped in `ManuallyDrop`.
-        //
-        // * When calling this method we skip the top-level destructor for
-        //   `Store<T>` with `mem::forget`. This skips both the destructor for
-        //   `T` and the destructor for `StoreInner<T>`. We do, however, run the
-        //   destructor for `Box<StoreInner<T>>` which, like above, will skip
-        //   the destructor for `T` since it's `ManuallyDrop`.
-        //
-        // In both cases all the other fields of `StoreInner<T>` should all get
-        // dropped, and the manual management of destructors is basically
-        // between this method and `Drop for Store<T>`. Note that this also
-        // means that `Drop for StoreInner<T>` cannot access `self.data`, so
-        // there is a comment indicating this as well.
-        unsafe {
-            let mut inner = ManuallyDrop::take(&mut self.inner);
-            std::mem::forget(self);
-            ManuallyDrop::take(&mut inner.data)
-        }
-    }
-
-    /// Configures the [`ResourceLimiter`] used to limit resource creation
-    /// within this [`Store`].
-    ///
-    /// Whenever resources such as linear memory, tables, or instances are
-    /// allocated the `limiter` specified here is invoked with the store's data
-    /// `T` and the returned [`ResourceLimiter`] is used to limit the operation
-    /// being allocated. The returned [`ResourceLimiter`] is intended to live
-    /// within the `T` itself, for example by storing a
-    /// [`StoreLimits`](crate::StoreLimits).
-    ///
-    /// Note that this limiter is only used to limit the creation/growth of
-    /// resources in the future, this does not retroactively attempt to apply
-    /// limits to the [`Store`].
-    ///
-    /// # Examples
-    ///
-    /// ```
-    /// use wasmtime::*;
-    ///
-    /// struct MyApplicationState {
-    ///     my_state: u32,
-    ///     limits: StoreLimits,
-    /// }
-    ///
-    /// let engine = Engine::default();
-    /// let my_state = MyApplicationState {
-    ///     my_state: 42,
-    ///     limits: StoreLimitsBuilder::new()
-    ///         .memory_size(1 << 20 /* 1 MB */)
-    ///         .instances(2)
-    ///         .build(),
-    /// };
-    /// let mut store = Store::new(&engine, my_state);
-    /// store.limiter(|state| &mut state.limits);
-    ///
-    /// // Creation of smaller memories is allowed
-    /// Memory::new(&mut store, MemoryType::new(1, None)).unwrap();
-    ///
-    /// // Creation of a larger memory, however, will exceed the 1MB limit we've
-    /// // configured
-    /// assert!(Memory::new(&mut store, MemoryType::new(1000, None)).is_err());
-    ///
-    /// // The number of instances in this store is limited to 2, so the third
-    /// // instance here should fail.
-    /// let module = Module::new(&engine, "(module)").unwrap();
-    /// assert!(Instance::new(&mut store, &module, &[]).is_ok());
-    /// assert!(Instance::new(&mut store, &module, &[]).is_ok());
-    /// assert!(Instance::new(&mut store, &module, &[]).is_err());
-    /// ```
-    ///
-    /// [`ResourceLimiter`]: crate::ResourceLimiter
-    pub fn limiter(
-        &mut self,
-        mut limiter: impl FnMut(&mut T) -> &mut (dyn crate::ResourceLimiter) + Send + Sync + 'static,
-    ) {
-        // Apply the limits on instances, tables, and memory given by the limiter:
-        let inner = &mut self.inner;
-        let (instance_limit, table_limit, memory_limit) = {
-            let l = limiter(&mut inner.data);
-            (l.instances(), l.tables(), l.memories())
-        };
-        let innermost = &mut inner.inner;
-        innermost.instance_limit = instance_limit;
-        innermost.table_limit = table_limit;
-        innermost.memory_limit = memory_limit;
-
-        // Save the limiter accessor function:
-        inner.limiter = Some(ResourceLimiterInner::Sync(Box::new(limiter)));
-    }
-
-    /// Configures the [`ResourceLimiterAsync`](crate::ResourceLimiterAsync)
-    /// used to limit resource creation within this [`Store`].
-    ///
-    /// This method is an asynchronous variant of the [`Store::limiter`] method
-    /// where the embedder can block the wasm request for more resources with
-    /// host `async` execution of futures.
-    ///
-    /// By using a [`ResourceLimiterAsync`](`crate::ResourceLimiterAsync`)
-    /// with a [`Store`], you can no longer use
-    /// [`Memory::new`](`crate::Memory::new`),
-    /// [`Memory::grow`](`crate::Memory::grow`),
-    /// [`Table::new`](`crate::Table::new`), and
-    /// [`Table::grow`](`crate::Table::grow`). Instead, you must use their
-    /// `async` variants: [`Memory::new_async`](`crate::Memory::new_async`),
-    /// [`Memory::grow_async`](`crate::Memory::grow_async`),
-    /// [`Table::new_async`](`crate::Table::new_async`), and
-    /// [`Table::grow_async`](`crate::Table::grow_async`).
-    ///
-    /// Note that this limiter is only used to limit the creation/growth of
-    /// resources in the future, this does not retroactively attempt to apply
-    /// limits to the [`Store`]. Additionally this must be used with an async
-    /// [`Store`] configured via
-    /// [`Config::async_support`](crate::Config::async_support).
-    #[cfg(feature = "async")]
-    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
-    pub fn limiter_async(
-        &mut self,
-        mut limiter: impl FnMut(&mut T) -> &mut (dyn crate::ResourceLimiterAsync)
-            + Send
-            + Sync
-            + 'static,
-    ) {
-        debug_assert!(self.inner.async_support());
-        // Apply the limits on instances, tables, and memory given by the limiter:
-        let inner = &mut self.inner;
-        let (instance_limit, table_limit, memory_limit) = {
-            let l = limiter(&mut inner.data);
-            (l.instances(), l.tables(), l.memories())
-        };
-        let innermost = &mut inner.inner;
-        innermost.instance_limit = instance_limit;
-        innermost.table_limit = table_limit;
-        innermost.memory_limit = memory_limit;
-
-        // Save the limiter accessor function:
-        inner.limiter = Some(ResourceLimiterInner::Async(Box::new(limiter)));
-    }
-
-    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
-    /// Configures an async function that runs on calls and returns between
-    /// WebAssembly and host code. For the non-async equivalent of this method,
-    /// see [`Store::call_hook`].
-    ///
-    /// The function is passed a [`CallHook`] argument, which indicates which
-    /// state transition the VM is making.
-    ///
-    /// This function's future may return a [`Trap`]. If a trap is returned
-    /// when an import was called, it is immediately raised as-if the host
-    /// import had returned the trap. If a trap is returned after wasm returns
-    /// to the host then the wasm function's result is ignored and this trap is
-    /// returned instead.
-    ///
-    /// After this function returns a trap, it may be called for subsequent
-    /// returns to host or wasm code as the trap propagates to the root call.
-    #[cfg(feature = "async")]
-    pub fn call_hook_async(&mut self, hook: impl CallHookHandler<T> + Send + Sync + 'static) {
-        self.inner.call_hook = Some(CallHookInner::Async(Box::new(hook)));
-    }
-
-    /// Configure a function that runs on calls and returns between WebAssembly
-    /// and host code.
-    ///
-    /// The function is passed a [`CallHook`] argument, which indicates which
-    /// state transition the VM is making.
-    ///
-    /// This function may return a [`Trap`]. If a trap is returned when an
-    /// import was called, it is immediately raised as-if the host import had
-    /// returned the trap. If a trap is returned after wasm returns to the host
-    /// then the wasm function's result is ignored and this trap is returned
-    /// instead.
-    ///
-    /// After this function returns a trap, it may be called for subsequent returns
-    /// to host or wasm code as the trap propagates to the root call.
-    pub fn call_hook(
-        &mut self,
-        hook: impl FnMut(&mut T, CallHook) -> Result<()> + Send + Sync + 'static,
-    ) {
-        self.inner.call_hook = Some(CallHookInner::Sync(Box::new(hook)));
-    }
-
-    /// Returns the [`Engine`] that this store is associated with.
-    pub fn engine(&self) -> &Engine {
-        self.inner.engine()
-    }
-
-    /// Perform garbage collection of `ExternRef`s.
-    ///
-    /// Note that it is not required to actively call this function. GC will
-    /// automatically happen when internal buffers fill up. This is provided if
-    /// fine-grained control over the GC is desired.
-    pub fn gc(&mut self) {
-        self.inner.gc()
-    }
-
-    /// Returns the amount of fuel consumed by this store's execution so far.
-    ///
-    /// If fuel consumption is not enabled via
-    /// [`Config::consume_fuel`](crate::Config::consume_fuel) then this
-    /// function will return `None`. Also note that fuel, if enabled, must be
-    /// originally configured via [`Store::add_fuel`].
-    pub fn fuel_consumed(&self) -> Option<u64> {
-        self.inner.fuel_consumed()
-    }
-
-    /// Returns remaining fuel in this [`Store`].
-    ///
-    /// If fuel consumption is not enabled via
-    /// [`Config::consume_fuel`](crate::Config::consume_fuel) then this
-    /// function will return `None`. Also note that fuel, if enabled, must be
-    /// originally configured via [`Store::add_fuel`].
-    pub fn fuel_remaining(&mut self) -> Option<u64> {
-        self.inner.fuel_remaining()
-    }
-
-    /// Adds fuel to this [`Store`] for wasm to consume while executing.
-    ///
-    /// For this method to work fuel consumption must be enabled via
-    /// [`Config::consume_fuel`](crate::Config::consume_fuel). By default a
-    /// [`Store`] starts with 0 fuel for wasm to execute with (meaning it will
-    /// immediately trap). This function must be called for the store to have
-    /// some fuel to allow WebAssembly to execute.
-    ///
-    /// Most WebAssembly instructions consume 1 unit of fuel. Some
-    /// instructions, such as `nop`, `drop`, `block`, and `loop`, consume 0
-    /// units, as any execution cost associated with them involves other
-    /// instructions which do consume fuel.
-    ///
-    /// Note that at this time when fuel is entirely consumed it will cause
-    /// wasm to trap. More usages of fuel are planned for the future.
-    ///
-    /// # Errors
-    ///
-    /// This function will return an error if fuel consumption is not enabled via
-    /// [`Config::consume_fuel`](crate::Config::consume_fuel).
-    pub fn add_fuel(&mut self, fuel: u64) -> Result<()> {
-        self.inner.add_fuel(fuel)
-    }
-
-    /// Synthetically consumes fuel from this [`Store`].
-    ///
-    /// For this method to work fuel consumption must be enabled via
-    /// [`Config::consume_fuel`](crate::Config::consume_fuel).
-    ///
-    /// WebAssembly execution will automatically consume fuel but if so desired
-    /// the embedder can also consume fuel manually to account for relative
-    /// costs of host functions, for example.
-    ///
-    /// This function will attempt to consume `fuel` units of fuel from within
-    /// this store. If the remaining amount of fuel allows this then `Ok(N)` is
-    /// returned where `N` is the amount of remaining fuel. Otherwise an error
-    /// is returned and no fuel is consumed.
-    ///
-    /// # Errors
-    ///
-    /// This function will return an error either if fuel consumption is not
-    /// enabled via [`Config::consume_fuel`](crate::Config::consume_fuel) or if
-    /// `fuel` exceeds the amount of remaining fuel within this store.
-    pub fn consume_fuel(&mut self, fuel: u64) -> Result<u64> {
-        self.inner.consume_fuel(fuel)
-    }
-
-    /// Configures a [`Store`] to generate a [`Trap`] whenever it runs out of
-    /// fuel.
-    ///
-    /// When a [`Store`] is configured to consume fuel with
-    /// [`Config::consume_fuel`](crate::Config::consume_fuel) this method will
-    /// configure what happens when fuel runs out. Specifically a WebAssembly
-    /// trap will be raised and the current execution of WebAssembly will be
-    /// aborted.
-    ///
-    /// This is the default behavior for running out of fuel.
-    pub fn out_of_fuel_trap(&mut self) {
-        self.inner.out_of_fuel_trap()
-    }
-
-    /// Configures a [`Store`] to yield execution of async WebAssembly code
-    /// periodically.
-    ///
-    /// When a [`Store`] is configured to consume fuel with
-    /// [`Config::consume_fuel`](crate::Config::consume_fuel) this method will
-    /// configure what happens when fuel runs out. Specifically executing
-    /// WebAssembly will be suspended and control will be yielded back to the
-    /// caller. This is only suitable with use of a store associated with an [async
-    /// config](crate::Config::async_support) because only then are futures used and yields
-    /// are possible.
-    ///
-    /// The purpose of this behavior is to ensure that futures which represent
-    /// execution of WebAssembly do not execute too long inside their
-    /// `Future::poll` method. This allows for some form of cooperative
-    /// multitasking where WebAssembly will voluntarily yield control
-    /// periodically (based on fuel consumption) back to the running thread.
-    ///
-    /// Note that futures returned by this crate will automatically flag
-    /// themselves to get re-polled if a yield happens. This means that
-    /// WebAssembly will continue to execute, just after giving the host an
-    /// opportunity to do something else.
-    ///
-    /// The `fuel_to_inject` parameter indicates how much fuel should be
-    /// automatically re-injected after fuel runs out. This is how much fuel
-    /// will be consumed between yields of an async future.
-    ///
-    /// The `injection_count` parameter indicates how many times this fuel will
-    /// be injected. Multiplying the two parameters is the total amount of fuel
-    /// this store is allowed before wasm traps.
-    ///
-    /// # Panics
-    ///
-    /// This method will panic if it is not called on a store associated with an [async
-    /// config](crate::Config::async_support).
-    pub fn out_of_fuel_async_yield(&mut self, injection_count: u64, fuel_to_inject: u64) {
-        self.inner
-            .out_of_fuel_async_yield(injection_count, fuel_to_inject)
-    }
-
-    /// Sets the epoch deadline to a certain number of ticks in the future.
-    ///
-    /// When the Wasm guest code is compiled with epoch-interruption
-    /// instrumentation
-    /// ([`Config::epoch_interruption()`](crate::Config::epoch_interruption)),
-    /// and when the `Engine`'s epoch is incremented
-    /// ([`Engine::increment_epoch()`](crate::Engine::increment_epoch))
-    /// past a deadline, execution can be configured to either trap or
-    /// yield and then continue.
-    ///
-    /// This deadline is always set relative to the current epoch:
-    /// `delta_beyond_current` ticks in the future. The deadline can
-    /// be set explicitly via this method, or refilled automatically
-    /// on a yield if configured via
-    /// [`epoch_deadline_async_yield_and_update()`](Store::epoch_deadline_async_yield_and_update). After
-    /// this method is invoked, the deadline is reached when
-    /// [`Engine::increment_epoch()`] has been invoked at least
-    /// `ticks_beyond_current` times.
-    ///
-    /// By default a store will trap immediately with an epoch deadline of 0
-    /// (which has always "elapsed"). This method is required to be configured
-    /// for stores with epochs enabled to some future epoch deadline.
-    ///
-    /// See documentation on
-    /// [`Config::epoch_interruption()`](crate::Config::epoch_interruption)
-    /// for an introduction to epoch-based interruption.
-    pub fn set_epoch_deadline(&mut self, ticks_beyond_current: u64) {
-        self.inner.set_epoch_deadline(ticks_beyond_current);
-    }
-
-    /// Configures epoch-deadline expiration to trap.
-    ///
-    /// When epoch-interruption-instrumented code is executed on this
-    /// store and the epoch deadline is reached before completion,
-    /// with the store configured in this way, execution will
-    /// terminate with a trap as soon as an epoch check in the
-    /// instrumented code is reached.
-    ///
-    /// This behavior is the default if the store is not otherwise
-    /// configured via
-    /// [`epoch_deadline_trap()`](Store::epoch_deadline_trap),
-    /// [`epoch_deadline_callback()`](Store::epoch_deadline_callback) or
-    /// [`epoch_deadline_async_yield_and_update()`](Store::epoch_deadline_async_yield_and_update).
-    ///
-    /// This setting is intended to allow for coarse-grained
-    /// interruption, but not a deterministic deadline of a fixed,
-    /// finite interval. For deterministic interruption, see the
-    /// "fuel" mechanism instead.
-    ///
-    /// Note that when this is used it's required to call
-    /// [`Store::set_epoch_deadline`] or otherwise wasm will always immediately
-    /// trap.
-    ///
-    /// See documentation on
-    /// [`Config::epoch_interruption()`](crate::Config::epoch_interruption)
-    /// for an introduction to epoch-based interruption.
-    pub fn epoch_deadline_trap(&mut self) {
-        self.inner.epoch_deadline_trap();
-    }
-
-    /// Configures epoch-deadline expiration to invoke a custom callback
-    /// function.
-    ///
-    /// When epoch-interruption-instrumented code is executed on this
-    /// store and the epoch deadline is reached before completion, the
-    /// provided callback function is invoked.
-    ///
-    /// This callback should either return an [`UpdateDeadline`], or
-    /// return an error, which will terminate execution with a trap.
-    ///
-    /// The [`UpdateDeadline`] is a positive number of ticks to
-    /// add to the epoch deadline, as well as indicating what
-    /// to do after the callback returns. If the [`Store`] is
-    /// configured with async support, then the callback may return
-    /// [`UpdateDeadline::Yield`] to yield to the async executor before
-    /// updating the epoch deadline. Alternatively, the callback may
-    /// return [`UpdateDeadline::Continue`] to update the epoch deadline
-    /// immediately.
-    ///
-    /// This setting is intended to allow for coarse-grained
-    /// interruption, but not a deterministic deadline of a fixed,
-    /// finite interval. For deterministic interruption, see the
-    /// "fuel" mechanism instead.
-    ///
-    /// See documentation on
-    /// [`Config::epoch_interruption()`](crate::Config::epoch_interruption)
-    /// for an introduction to epoch-based interruption.
-    pub fn epoch_deadline_callback(
-        &mut self,
-        callback: impl FnMut(StoreContextMut<T>) -> Result<UpdateDeadline> + Send + Sync + 'static,
-    ) {
-        self.inner.epoch_deadline_callback(Box::new(callback));
-    }
-
-    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
-    /// Configures epoch-deadline expiration to yield to the async
-    /// caller and the update the deadline.
-    ///
-    /// When epoch-interruption-instrumented code is executed on this
-    /// store and the epoch deadline is reached before completion,
-    /// with the store configured in this way, execution will yield
-    /// (the future will return `Pending` but re-awake itself for
-    /// later execution) and, upon resuming, the store will be
-    /// configured with an epoch deadline equal to the current epoch
-    /// plus `delta` ticks.
-    ///
-    /// This setting is intended to allow for cooperative timeslicing
-    /// of multiple CPU-bound Wasm guests in different stores, all
-    /// executing under the control of an async executor. To drive
-    /// this, stores should be configured to "yield and update"
-    /// automatically with this function, and some external driver (a
-    /// thread that wakes up periodically, or a timer
-    /// signal/interrupt) should call
-    /// [`Engine::increment_epoch()`](crate::Engine::increment_epoch).
-    ///
-    /// See documentation on
-    /// [`Config::epoch_interruption()`](crate::Config::epoch_interruption)
-    /// for an introduction to epoch-based interruption.
-    #[cfg(feature = "async")]
-    pub fn epoch_deadline_async_yield_and_update(&mut self, delta: u64) {
-        self.inner.epoch_deadline_async_yield_and_update(delta);
-    }
-}
-
-impl<'a, T> StoreContext<'a, T> {
-    pub(crate) fn async_support(&self) -> bool {
-        self.0.async_support()
-    }
-
-    /// Returns the underlying [`Engine`] this store is connected to.
-    pub fn engine(&self) -> &Engine {
-        self.0.engine()
-    }
-
-    /// Access the underlying data owned by this `Store`.
-    ///
-    /// Same as [`Store::data`].
-    pub fn data(&self) -> &'a T {
-        self.0.data()
-    }
-
-    /// Returns the fuel consumed by this store.
-    ///
-    /// For more information see [`Store::fuel_consumed`].
-    pub fn fuel_consumed(&self) -> Option<u64> {
-        self.0.fuel_consumed()
-    }
-
-    /// Returns remaining fuel in this store.
-    ///
-    /// For more information see [`Store::fuel_remaining`]
-    pub fn fuel_remaining(&mut self) -> Option<u64> {
-        self.0.fuel_remaining()
-    }
-}
-
-impl<'a, T> StoreContextMut<'a, T> {
-    /// Access the underlying data owned by this `Store`.
-    ///
-    /// Same as [`Store::data`].
-    pub fn data(&self) -> &T {
-        self.0.data()
-    }
-
-    /// Access the underlying data owned by this `Store`.
-    ///
-    /// Same as [`Store::data_mut`].
-    pub fn data_mut(&mut self) -> &mut T {
-        self.0.data_mut()
-    }
-
-    /// Returns the underlying [`Engine`] this store is connected to.
-    pub fn engine(&self) -> &Engine {
-        self.0.engine()
-    }
-
-    /// Perform garbage collection of `ExternRef`s.
-    ///
-    /// Same as [`Store::gc`].
-    pub fn gc(&mut self) {
-        self.0.gc()
-    }
-
-    /// Returns the fuel consumed by this store.
-    ///
-    /// For more information see [`Store::fuel_consumed`].
-    pub fn fuel_consumed(&self) -> Option<u64> {
-        self.0.fuel_consumed()
-    }
-
-    /// Returns remaining fuel in this store.
-    ///
-    /// For more information see [`Store::fuel_remaining`]
-    pub fn fuel_remaining(&self) -> Option<u64> {
-        self.0.fuel_remaining()
-    }
-
-    /// Inject more fuel into this store to be consumed when executing wasm code.
-    ///
-    /// For more information see [`Store::add_fuel`]
-    pub fn add_fuel(&mut self, fuel: u64) -> Result<()> {
-        self.0.add_fuel(fuel)
-    }
-
-    /// Synthetically consume fuel from this store.
-    ///
-    /// For more information see [`Store::consume_fuel`]
-    pub fn consume_fuel(&mut self, fuel: u64) -> Result<u64> {
-        self.0.consume_fuel(fuel)
-    }
-
-    /// Configures this `Store` to trap whenever fuel runs out.
-    ///
-    /// For more information see [`Store::out_of_fuel_trap`]
-    pub fn out_of_fuel_trap(&mut self) {
-        self.0.out_of_fuel_trap()
-    }
-
-    /// Configures this `Store` to yield while executing futures whenever fuel
-    /// runs out.
-    ///
-    /// For more information see [`Store::out_of_fuel_async_yield`]
-    pub fn out_of_fuel_async_yield(&mut self, injection_count: u64, fuel_to_inject: u64) {
-        self.0
-            .out_of_fuel_async_yield(injection_count, fuel_to_inject)
-    }
-
-    /// Sets the epoch deadline to a certain number of ticks in the future.
-    ///
-    /// For more information see [`Store::set_epoch_deadline`].
-    pub fn set_epoch_deadline(&mut self, ticks_beyond_current: u64) {
-        self.0.set_epoch_deadline(ticks_beyond_current);
-    }
-
-    /// Configures epoch-deadline expiration to trap.
-    ///
-    /// For more information see [`Store::epoch_deadline_trap`].
-    pub fn epoch_deadline_trap(&mut self) {
-        self.0.epoch_deadline_trap();
-    }
-
-    #[cfg_attr(nightlydoc, doc(cfg(feature = "async")))]
-    /// Configures epoch-deadline expiration to yield to the async
-    /// caller and the update the deadline.
-    ///
-    /// For more information see
-    /// [`Store::epoch_deadline_async_yield_and_update`].
-    #[cfg(feature = "async")]
-    pub fn epoch_deadline_async_yield_and_update(&mut self, delta: u64) {
-        self.0.epoch_deadline_async_yield_and_update(delta);
-    }
-}
-
-impl<T> StoreInner<T> {
-    #[inline]
-    fn data(&self) -> &T {
-        &self.data
-    }
-
-    #[inline]
-    fn data_mut(&mut self) -> &mut T {
-        &mut self.data
-    }
-
-    pub fn call_hook(&mut self, s: CallHook) -> Result<()> {
-        match &mut self.call_hook {
-            Some(CallHookInner::Sync(hook)) => hook(&mut self.data, s),
-
-            #[cfg(feature = "async")]
-            Some(CallHookInner::Async(handler)) => unsafe {
-                Ok(self
-                    .inner
-                    .async_cx()
-                    .ok_or_else(|| anyhow!("couldn't grab async_cx for call hook"))?
-                    .block_on(handler.handle_call_event(&mut self.data, s).as_mut())??)
-            },
-
-            None => Ok(()),
-        }
-    }
-}
-
-#[doc(hidden)]
-impl StoreOpaque {
-    pub fn id(&self) -> StoreId {
-        self.store_data.id()
-    }
-
-    pub fn bump_resource_counts(&mut self, module: &Module) -> Result<()> {
-        fn bump(slot: &mut usize, max: usize, amt: usize, desc: &str) -> Result<()> {
-            let new = slot.saturating_add(amt);
-            if new > max {
-                bail!(
-                    "resource limit exceeded: {} count too high at {}",
-                    desc,
-                    new
-                );
-            }
-            *slot = new;
-            Ok(())
-        }
-
-        let module = module.env_module();
-        let memories = module.memory_plans.len() - module.num_imported_memories;
-        let tables = module.table_plans.len() - module.num_imported_tables;
-
-        bump(&mut self.instance_count, self.instance_limit, 1, "instance")?;
-        bump(
-            &mut self.memory_count,
-            self.memory_limit,
-            memories,
-            "memory",
-        )?;
-        bump(&mut self.table_count, self.table_limit, tables, "table")?;
-
-        Ok(())
-    }
-
-    #[inline]
-    pub fn async_support(&self) -> bool {
-        cfg!(feature = "async") && self.engine().config().async_support
-    }
-
-    #[inline]
-    pub fn engine(&self) -> &Engine {
-        &self.engine
-    }
-
-    #[inline]
-    pub fn store_data(&self) -> &StoreData {
-        &self.store_data
-    }
-
-    #[inline]
-    pub fn store_data_mut(&mut self) -> &mut StoreData {
-        &mut self.store_data
-    }
-
-    #[inline]
-    pub(crate) fn modules(&self) -> &ModuleRegistry {
-        &self.modules
-    }
-
-    #[inline]
-    pub(crate) fn modules_mut(&mut self) -> &mut ModuleRegistry {
-        &mut self.modules
-    }
-
-    pub(crate) fn func_refs(&mut self) -> &mut FuncRefs {
-        &mut self.func_refs
-    }
-
-    pub(crate) fn fill_func_refs(&mut self) {
-        self.func_refs.fill(&mut self.modules);
-    }
-
-    pub(crate) fn push_instance_pre_func_refs(&mut self, func_refs: Arc<[VMFuncRef]>) {
-        self.func_refs.push_instance_pre_func_refs(func_refs);
-    }
-
-    pub(crate) fn host_globals(&mut self) -> &mut Vec<StoreBox<VMHostGlobalContext>> {
-        &mut self.host_globals
-    }
-
-    pub unsafe fn add_instance(&mut self, handle: InstanceHandle, ondemand: bool) -> InstanceId {
-        self.instances.push(StoreInstance {
-            handle: handle.clone(),
-            ondemand,
-        });
-        InstanceId(self.instances.len() - 1)
-    }
-
-    pub fn instance(&self, id: InstanceId) -> &InstanceHandle {
-        &self.instances[id.0].handle
-    }
-
-    pub fn instance_mut(&mut self, id: InstanceId) -> &mut InstanceHandle {
-        &mut self.instances[id.0].handle
-    }
-
-    pub fn all_instances(&self) -> impl ExactSizeIterator<Item = Instance> {
-        self.store_data()
-            .iter::<InstanceData>()
-            .map(Instance::from_stored)
-    }
-
-    pub fn all_memories(&self) -> impl ExactSizeIterator<Item = Memory> {
-        self.store_data()
-            .iter::<ExportMemory>()
-            .map(Memory::from_stored)
-    }
-
-    pub fn all_globals(&self) -> impl ExactSizeIterator<Item = Global> {
-        self.store_data()
-            .iter::<ExportGlobal>()
-            .map(Global::from_stored)
-    }
-
-    #[cfg_attr(not(target_os = "linux"), allow(dead_code))] // not used on all platforms
-    pub fn set_signal_handler(&mut self, handler: Option<Box<SignalHandler<'static>>>) {
-        self.signal_handler = handler;
-    }
-
-    #[inline]
-    pub fn runtime_limits(&self) -> &VMRuntimeLimits {
-        &self.runtime_limits
-    }
-
-    #[inline]
-    pub fn externref_activations_table(&mut self) -> &mut VMExternRefActivationsTable {
-        &mut self.externref_activations_table
-    }
-
-    pub fn gc(&mut self) {
-        // For this crate's API, we ensure that `set_stack_canary` invariants
-        // are upheld for all host-->Wasm calls.
-        unsafe {
-            wasmtime_runtime::gc(
-                self.runtime_limits(),
-                &self.modules,
-                &mut self.externref_activations_table,
-            )
-        }
-    }
-
-    /// Yields the async context, assuming that we are executing on a fiber and
-    /// that fiber is not in the process of dying. This function will return
-    /// None in the latter case (the fiber is dying), and panic if
-    /// `async_support()` is false.
-    #[cfg(feature = "async")]
-    #[inline]
-    pub fn async_cx(&self) -> Option<AsyncCx> {
-        debug_assert!(self.async_support());
-
-        let poll_cx_box_ptr = self.async_state.current_poll_cx.get();
-        if poll_cx_box_ptr.is_null() {
-            return None;
-        }
-
-        let poll_cx_inner_ptr = unsafe { *poll_cx_box_ptr };
-        if poll_cx_inner_ptr.is_null() {
-            return None;
-        }
-
-        Some(AsyncCx {
-            current_suspend: self.async_state.current_suspend.get(),
-            current_poll_cx: poll_cx_box_ptr,
-        })
-    }
-
-    pub fn fuel_consumed(&self) -> Option<u64> {
-        if !self.engine.config().tunables.consume_fuel {
-            return None;
-        }
-        let consumed = unsafe { *self.runtime_limits.fuel_consumed.get() };
-        Some(u64::try_from(self.fuel_adj + consumed).unwrap())
-    }
-
-    fn fuel_remaining(&self) -> Option<u64> {
-        if !self.engine.config().tunables.consume_fuel {
-            return None;
-        }
-        let consumed = unsafe { *self.runtime_limits.fuel_consumed.get() };
-        Some(u64::try_from(-consumed).unwrap())
-    }
-
-    fn out_of_fuel_trap(&mut self) {
-        self.out_of_gas_behavior = OutOfGas::Trap;
-    }
-
-    fn out_of_fuel_async_yield(&mut self, injection_count: u64, fuel_to_inject: u64) {
-        assert!(
-            self.async_support(),
-            "cannot use `out_of_fuel_async_yield` without enabling async support in the config"
-        );
-        self.out_of_gas_behavior = OutOfGas::InjectFuel {
-            injection_count,
-            fuel_to_inject,
-        };
-    }
-
-    /// Yields execution to the caller on out-of-gas or epoch interruption.
-    ///
-    /// This only works on async futures and stores, and assumes that we're
-    /// executing on a fiber. This will yield execution back to the caller once.
-    #[cfg(feature = "async")]
-    fn async_yield_impl(&mut self) -> Result<()> {
-        // Small future that yields once and then returns ()
-        #[derive(Default)]
-        struct Yield {
-            yielded: bool,
-        }
-
-        impl Future for Yield {
-            type Output = ();
-
-            fn poll(mut self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<()> {
-                if self.yielded {
-                    Poll::Ready(())
-                } else {
-                    // Flag ourselves as yielded to return next time, and also
-                    // flag the waker that we're already ready to get
-                    // re-enqueued for another poll.
-                    self.yielded = true;
-                    cx.waker().wake_by_ref();
-                    Poll::Pending
-                }
-            }
-        }
-
-        let mut future = Yield::default();
-
-        // When control returns, we have a `Result<()>` passed
-        // in from the host fiber. If this finished successfully then
-        // we were resumed normally via a `poll`, so keep going.  If
-        // the future was dropped while we were yielded, then we need
-        // to clean up this fiber. Do so by raising a trap which will
-        // abort all wasm and get caught on the other side to clean
-        // things up.
-        unsafe {
-            self.async_cx()
-                .expect("attempted to pull async context during shutdown")
-                .block_on(Pin::new_unchecked(&mut future))
-        }
-    }
-
-    fn add_fuel(&mut self, fuel: u64) -> Result<()> {
-        anyhow::ensure!(
-            self.engine().config().tunables.consume_fuel,
-            "fuel is not configured in this store"
-        );
-
-        // Fuel is stored as an i64, so we need to cast it. If the provided fuel
-        // value overflows that just assume that i64::max will suffice. Wasm
-        // execution isn't fast enough to burn through i64::max fuel in any
-        // reasonable amount of time anyway.
-        let fuel = i64::try_from(fuel).unwrap_or(i64::max_value());
-        let adj = self.fuel_adj;
-        let consumed_ptr = unsafe { &mut *self.runtime_limits.fuel_consumed.get() };
-
-        match (consumed_ptr.checked_sub(fuel), adj.checked_add(fuel)) {
-            // If we succesfully did arithmetic without overflowing then we can
-            // just update our fields.
-            (Some(consumed), Some(adj)) => {
-                self.fuel_adj = adj;
-                *consumed_ptr = consumed;
-            }
-
-            // Otherwise something overflowed. Make sure that we preserve the
-            // amount of fuel that's already consumed, but otherwise assume that
-            // we were given infinite fuel.
-            _ => {
-                self.fuel_adj = i64::max_value();
-                *consumed_ptr = (*consumed_ptr + adj) - i64::max_value();
-            }
-        }
-
-        Ok(())
-    }
-
-    fn consume_fuel(&mut self, fuel: u64) -> Result<u64> {
-        let consumed_ptr = unsafe { &mut *self.runtime_limits.fuel_consumed.get() };
-        match i64::try_from(fuel)
-            .ok()
-            .and_then(|fuel| consumed_ptr.checked_add(fuel))
-        {
-            Some(consumed) if consumed <= 0 => {
-                *consumed_ptr = consumed;
-                Ok(u64::try_from(-consumed).unwrap())
-            }
-            _ => bail!("not enough fuel remaining in store"),
-        }
-    }
-
-    #[inline]
-    pub fn signal_handler(&self) -> Option<*const SignalHandler<'static>> {
-        let handler = self.signal_handler.as_ref()?;
-        Some(&**handler as *const _)
-    }
-
-    #[inline]
-    pub fn vmruntime_limits(&self) -> *mut VMRuntimeLimits {
-        &self.runtime_limits as *const VMRuntimeLimits as *mut VMRuntimeLimits
-    }
-
-    pub unsafe fn insert_vmexternref_without_gc(&mut self, r: VMExternRef) {
-        self.externref_activations_table.insert_without_gc(r);
-    }
-
-    #[inline]
-    pub fn default_caller(&self) -> *mut VMContext {
-        self.default_caller.vmctx()
-    }
-
-    pub fn traitobj(&self) -> *mut dyn wasmtime_runtime::Store {
-        self.default_caller.store()
-    }
-
-    /// Takes the cached `Vec<Val>` stored internally across hostcalls to get
-    /// used as part of calling the host in a `Func::new` method invocation.
-    #[inline]
-    pub fn take_hostcall_val_storage(&mut self) -> Vec<Val> {
-        mem::take(&mut self.hostcall_val_storage)
-    }
-
-    /// Restores the vector previously taken by `take_hostcall_val_storage`
-    /// above back into the store, allowing it to be used in the future for the
-    /// next wasm->host call.
-    #[inline]
-    pub fn save_hostcall_val_storage(&mut self, storage: Vec<Val>) {
-        if storage.capacity() > self.hostcall_val_storage.capacity() {
-            self.hostcall_val_storage = storage;
-        }
-    }
-
-    /// Same as `take_hostcall_val_storage`, but for the direction of the host
-    /// calling wasm.
-    #[inline]
-    pub fn take_wasm_val_raw_storage(&mut self) -> Vec<ValRaw> {
-        mem::take(&mut self.wasm_val_raw_storage)
-    }
-
-    /// Same as `save_hostcall_val_storage`, but for the direction of the host
-    /// calling wasm.
-    #[inline]
-    pub fn save_wasm_val_raw_storage(&mut self, storage: Vec<ValRaw>) {
-        if storage.capacity() > self.wasm_val_raw_storage.capacity() {
-            self.wasm_val_raw_storage = storage;
-        }
-    }
-
-    pub(crate) fn push_rooted_funcs(&mut self, funcs: Arc<[Definition]>) {
-        self.rooted_host_funcs.push(funcs);
-    }
-
-    /// Translates a WebAssembly fault at the native `pc` and native `addr` to a
-    /// WebAssembly-relative fault.
-    ///
-    /// This function may abort the process if `addr` is not found to actually
-    /// reside in any linear memory. In such a situation it means that the
-    /// segfault was erroneously caught by Wasmtime and is possibly indicative
-    /// of a code generator bug.
-    ///
-    /// This function returns `None` for dynamically-bounds-checked-memories
-    /// with spectre mitigations enabled since the hardware fault address is
-    /// always zero in these situations which means that the trapping context
-    /// doesn't have enough information to report the fault address.
-    pub(crate) fn wasm_fault(&self, pc: usize, addr: usize) -> Option<WasmFault> {
-        // Explicitly bounds-checked memories with spectre-guards enabled will
-        // cause out-of-bounds accesses to get routed to address 0, so allow
-        // wasm instructions to fault on the null address.
-        if addr == 0 {
-            return None;
-        }
-
-        // Search all known instances in this store for this address. Note that
-        // this is probably not the speediest way to do this. Traps, however,
-        // are generally not expected to be super fast and additionally stores
-        // probably don't have all that many instances or memories.
-        //
-        // If this loop becomes hot in the future, however, it should be
-        // possible to precompute maps about linear memories in a store and have
-        // a quicker lookup.
-        let mut fault = None;
-        for instance in self.instances.iter() {
-            if let Some(f) = instance.handle.wasm_fault(addr) {
-                assert!(fault.is_none());
-                fault = Some(f);
-            }
-        }
-        if fault.is_some() {
-            return fault;
-        }
-
-        eprintln!(
-            "\
-Wasmtime caught a segfault for a wasm program because the faulting instruction
-is allowed to segfault due to how linear memories are implemented. The address
-that was accessed, however, is not known to any linear memory in use within this
-Store. This may be indicative of a critical bug in Wasmtime's code generation
-because all addresses which are known to be reachable from wasm won't reach this
-message.
-
-    pc:      0x{pc:x}
-    address: 0x{addr:x}
-
-This is a possible security issue because WebAssembly has accessed something it
-shouldn't have been able to. Other accesses may have succeeded and this one just
-happened to be caught. The process will now be aborted to prevent this damage
-from going any further and to alert what's going on. If this is a security
-issue please reach out to the Wasmtime team via its security policy
-at https://bytecodealliance.org/security.
-"
-        );
-        std::process::abort();
-    }
-
-    #[cfg(feature = "component-model")]
-    pub(crate) fn component_calls_and_host_table(
-        &mut self,
-    ) -> (
-        &mut wasmtime_runtime::component::CallContexts,
-        &mut wasmtime_runtime::component::ResourceTable,
-    ) {
-        (&mut self.component_calls, &mut self.component_host_table)
-    }
-}
-
-impl<T> StoreContextMut<'_, T> {
-    /// Executes a synchronous computation `func` asynchronously on a new fiber.
-    ///
-    /// This function will convert the synchronous `func` into an asynchronous
-    /// future. This is done by running `func` in a fiber on a separate native
-    /// stack which can be suspended and resumed from.
-    ///
-    /// Most of the nitty-gritty here is how we juggle the various contexts
-    /// necessary to suspend the fiber later on and poll sub-futures. It's hoped
-    /// that the various comments are illuminating as to what's going on here.
-    #[cfg(feature = "async")]
-    pub(crate) async fn on_fiber<R>(
-        &mut self,
-        func: impl FnOnce(&mut StoreContextMut<'_, T>) -> R + Send,
-    ) -> Result<R>
-    where
-        T: Send,
-    {
-        let config = self.engine().config();
-        debug_assert!(self.0.async_support());
-        debug_assert!(config.async_stack_size > 0);
-
-        let mut slot = None;
-        let future = {
-            let current_poll_cx = self.0.async_state.current_poll_cx.get();
-            let current_suspend = self.0.async_state.current_suspend.get();
-            let stack = self.engine().allocator().allocate_fiber_stack()?;
-
-            let engine = self.engine().clone();
-            let slot = &mut slot;
-            let fiber = wasmtime_fiber::Fiber::new(stack, move |keep_going, suspend| {
-                // First check and see if we were interrupted/dropped, and only
-                // continue if we haven't been.
-                keep_going?;
-
-                // Configure our store's suspension context for the rest of the
-                // execution of this fiber. Note that a raw pointer is stored here
-                // which is only valid for the duration of this closure.
-                // Consequently we at least replace it with the previous value when
-                // we're done. This reset is also required for correctness because
-                // otherwise our value will overwrite another active fiber's value.
-                // There should be a test that segfaults in `async_functions.rs` if
-                // this `Replace` is removed.
-                unsafe {
-                    let _reset = Reset(current_suspend, *current_suspend);
-                    *current_suspend = suspend;
-
-                    *slot = Some(func(self));
-                    Ok(())
-                }
-            })?;
-
-            // Once we have the fiber representing our synchronous computation, we
-            // wrap that in a custom future implementation which does the
-            // translation from the future protocol to our fiber API.
-            FiberFuture {
-                fiber,
-                current_poll_cx,
-                engine,
-                state: Some(wasmtime_runtime::AsyncWasmCallState::new()),
-            }
-        };
-        future.await?;
-
-        return Ok(slot.unwrap());
-
-        struct FiberFuture<'a> {
-            fiber: wasmtime_fiber::Fiber<'a, Result<()>, (), Result<()>>,
-            current_poll_cx: *mut *mut Context<'static>,
-            engine: Engine,
-            // See comments in `FiberFuture::resume` for this
-            state: Option<wasmtime_runtime::AsyncWasmCallState>,
-        }
-
-        // This is surely the most dangerous `unsafe impl Send` in the entire
-        // crate. There are two members in `FiberFuture` which cause it to not
-        // be `Send`. One is `current_poll_cx` and is entirely uninteresting.
-        // This is just used to manage `Context` pointers across `await` points
-        // in the future, and requires raw pointers to get it to happen easily.
-        // Nothing too weird about the `Send`-ness, values aren't actually
-        // crossing threads.
-        //
-        // The really interesting piece is `fiber`. Now the "fiber" here is
-        // actual honest-to-god Rust code which we're moving around. What we're
-        // doing is the equivalent of moving our thread's stack to another OS
-        // thread. Turns out we, in general, have no idea what's on the stack
-        // and would generally have no way to verify that this is actually safe
-        // to do!
-        //
-        // Thankfully, though, Wasmtime has the power. Without being glib it's
-        // actually worth examining what's on the stack. It's unfortunately not
-        // super-local to this function itself. Our closure to `Fiber::new` runs
-        // `func`, which is given to us from the outside. Thankfully, though, we
-        // have tight control over this. Usage of `on_fiber` is typically done
-        // *just* before entering WebAssembly itself, so we'll have a few stack
-        // frames of Rust code (all in Wasmtime itself) before we enter wasm.
-        //
-        // Once we've entered wasm, well then we have a whole bunch of wasm
-        // frames on the stack. We've got this nifty thing called Cranelift,
-        // though, which allows us to also have complete control over everything
-        // on the stack!
-        //
-        // Finally, when wasm switches back to the fiber's starting pointer
-        // (this future we're returning) then it means wasm has reentered Rust.
-        // Suspension can only happen via the `block_on` function of an
-        // `AsyncCx`. This, conveniently, also happens entirely in Wasmtime
-        // controlled code!
-        //
-        // There's an extremely important point that should be called out here.
-        // User-provided futures **are not on the stack** during suspension
-        // points. This is extremely crucial because we in general cannot reason
-        // about Send/Sync for stack-local variables since rustc doesn't analyze
-        // them at all. With our construction, though, we are guaranteed that
-        // Wasmtime owns all stack frames between the stack of a fiber and when
-        // the fiber suspends (and it could move across threads). At this time
-        // the only user-provided piece of data on the stack is the future
-        // itself given to us. Lo-and-behold as you might notice the future is
-        // required to be `Send`!
-        //
-        // What this all boils down to is that we, as the authors of Wasmtime,
-        // need to be extremely careful that on the async fiber stack we only
-        // store Send things. For example we can't start using `Rc` willy nilly
-        // by accident and leave a copy in TLS somewhere. (similarly we have to
-        // be ready for TLS to change while we're executing wasm code between
-        // suspension points).
-        //
-        // While somewhat onerous it shouldn't be too too hard (the TLS bit is
-        // the hardest bit so far). This does mean, though, that no user should
-        // ever have to worry about the `Send`-ness of Wasmtime. If rustc says
-        // it's ok, then it's ok.
-        //
-        // With all that in mind we unsafely assert here that wasmtime is
-        // correct. We declare the fiber as only containing Send data on its
-        // stack, despite not knowing for sure at compile time that this is
-        // correct. That's what `unsafe` in Rust is all about, though, right?
-        unsafe impl Send for FiberFuture<'_> {}
-
-        impl FiberFuture<'_> {
-            /// This is a helper function to call `resume` on the underlying
-            /// fiber while correctly managing Wasmtime's thread-local data.
-            ///
-            /// Wasmtime's implementation of traps leverages thread-local data
-            /// to get access to metadata during a signal. This thread-local
-            /// data is a linked list of "activations" where the nodes of the
-            /// linked list are stored on the stack. It would be invalid as a
-            /// result to suspend a computation with the head of the linked list
-            /// on this stack then move the stack to another thread and resume
-            /// it. That means that a different thread would point to our stack
-            /// and our thread doesn't point to our stack at all!
-            ///
-            /// Basically management of TLS is required here one way or another.
-            /// The strategy currently settled on is to manage the list of
-            /// activations created by this fiber as a unit. When a fiber
-            /// resumes the linked list is prepended to the current thread's
-            /// list. When the fiber is suspended then the fiber's list of
-            /// activations are all removed en-masse and saved within the fiber.
-            fn resume(&mut self, val: Result<()>) -> Result<Result<()>, ()> {
-                unsafe {
-                    let prev = self.state.take().unwrap().push();
-                    let restore = Restore {
-                        fiber: self,
-                        state: Some(prev),
-                    };
-                    return restore.fiber.fiber.resume(val);
-                }
-
-                struct Restore<'a, 'b> {
-                    fiber: &'a mut FiberFuture<'b>,
-                    state: Option<wasmtime_runtime::PreviousAsyncWasmCallState>,
-                }
-
-                impl Drop for Restore<'_, '_> {
-                    fn drop(&mut self) {
-                        unsafe {
-                            self.fiber.state = Some(self.state.take().unwrap().restore());
-                        }
-                    }
-                }
-            }
-        }
-
-        impl Future for FiberFuture<'_> {
-            type Output = Result<()>;
-
-            fn poll(mut self: Pin<&mut Self>, cx: &mut Context) -> Poll<Self::Output> {
-                // We need to carry over this `cx` into our fiber's runtime
-                // for when it tries to poll sub-futures that are created. Doing
-                // this must be done unsafely, however, since `cx` is only alive
-                // for this one singular function call. Here we do a `transmute`
-                // to extend the lifetime of `Context` so it can be stored in
-                // our `Store`, and then we replace the current polling context
-                // with this one.
-                //
-                // Note that the replace is done for weird situations where
-                // futures might be switching contexts and there's multiple
-                // wasmtime futures in a chain of futures.
-                //
-                // On exit from this function, though, we reset the polling
-                // context back to what it was to signify that `Store` no longer
-                // has access to this pointer.
-                unsafe {
-                    let _reset = Reset(self.current_poll_cx, *self.current_poll_cx);
-                    *self.current_poll_cx =
-                        std::mem::transmute::<&mut Context<'_>, *mut Context<'static>>(cx);
-
-                    // After that's set up we resume execution of the fiber, which
-                    // may also start the fiber for the first time. This either
-                    // returns `Ok` saying the fiber finished (yay!) or it
-                    // returns `Err` with the payload passed to `suspend`, which
-                    // in our case is `()`.
-                    match self.resume(Ok(())) {
-                        Ok(result) => Poll::Ready(result),
-
-                        // If `Err` is returned that means the fiber polled a
-                        // future but it said "Pending", so we propagate that
-                        // here.
-                        //
-                        // An additional safety check is performed when leaving
-                        // this function to help bolster the guarantees of
-                        // `unsafe impl Send` above. Notably this future may get
-                        // re-polled on a different thread. Wasmtime's
-                        // thread-local state points to the stack, however,
-                        // meaning that it would be incorrect to leave a pointer
-                        // in TLS when this function returns. This function
-                        // performs a runtime assert to verify that this is the
-                        // case, notably that the one TLS pointer Wasmtime uses
-                        // is not pointing anywhere within the stack. If it is
-                        // then that's a bug indicating that TLS management in
-                        // Wasmtime is incorrect.
-                        Err(()) => {
-                            if let Some(range) = self.fiber.stack().range() {
-                                wasmtime_runtime::AsyncWasmCallState::assert_current_state_not_in_range(range);
-                            }
-                            Poll::Pending
-                        }
-                    }
-                }
-            }
-        }
-
-        // Dropping futures is pretty special in that it means the future has
-        // been requested to be cancelled. Here we run the risk of dropping an
-        // in-progress fiber, and if we were to do nothing then the fiber would
-        // leak all its owned stack resources.
-        //
-        // To handle this we implement `Drop` here and, if the fiber isn't done,
-        // resume execution of the fiber saying "hey please stop you're
-        // interrupted". Our `Trap` created here (which has the stack trace
-        // of whomever dropped us) will then get propagated in whatever called
-        // `block_on`, and the idea is that the trap propagates all the way back
-        // up to the original fiber start, finishing execution.
-        //
-        // We don't actually care about the fiber's return value here (no one's
-        // around to look at it), we just assert the fiber finished to
-        // completion.
-        impl Drop for FiberFuture<'_> {
-            fn drop(&mut self) {
-                if !self.fiber.done() {
-                    let result = self.resume(Err(anyhow!("future dropped")));
-                    // This resumption with an error should always complete the
-                    // fiber. While it's technically possible for host code to catch
-                    // the trap and re-resume, we'd ideally like to signal that to
-                    // callers that they shouldn't be doing that.
-                    debug_assert!(result.is_ok());
-                }
-
-                self.state.take().unwrap().assert_null();
-
-                unsafe {
-                    self.engine
-                        .allocator()
-                        .deallocate_fiber_stack(self.fiber.stack());
-                }
-            }
-        }
-    }
-}
-
-#[cfg(feature = "async")]
-pub struct AsyncCx {
-    current_suspend: *mut *const wasmtime_fiber::Suspend<Result<()>, (), Result<()>>,
-    current_poll_cx: *mut *mut Context<'static>,
-}
-
-#[cfg(feature = "async")]
-impl AsyncCx {
-    /// Blocks on the asynchronous computation represented by `future` and
-    /// produces the result here, in-line.
-    ///
-    /// This function is designed to only work when it's currently executing on
-    /// a native fiber. This fiber provides the ability for us to handle the
-    /// future's `Pending` state as "jump back to whomever called the fiber in
-    /// an asynchronous fashion and propagate `Pending`". This tight coupling
-    /// with `on_fiber` below is what powers the asynchronicity of calling wasm.
-    /// Note that the asynchronous part only applies to host functions, wasm
-    /// itself never really does anything asynchronous at this time.
-    ///
-    /// This function takes a `future` and will (appear to) synchronously wait
-    /// on the result. While this function is executing it will fiber switch
-    /// to-and-from the original frame calling `on_fiber` which should be a
-    /// guarantee due to how async stores are configured.
-    ///
-    /// The return value here is either the output of the future `T`, or a trap
-    /// which represents that the asynchronous computation was cancelled. It is
-    /// not recommended to catch the trap and try to keep executing wasm, so
-    /// we've tried to liberally document this.
-    pub unsafe fn block_on<U>(
-        &self,
-        mut future: Pin<&mut (dyn Future<Output = U> + Send)>,
-    ) -> Result<U> {
-        // Take our current `Suspend` context which was configured as soon as
-        // our fiber started. Note that we must load it at the front here and
-        // save it on our stack frame. While we're polling the future other
-        // fibers may be started for recursive computations, and the current
-        // suspend context is only preserved at the edges of the fiber, not
-        // during the fiber itself.
-        //
-        // For a little bit of extra safety we also replace the current value
-        // with null to try to catch any accidental bugs on our part early.
-        // This is all pretty unsafe so we're trying to be careful...
-        //
-        // Note that there should be a segfaulting test  in `async_functions.rs`
-        // if this `Reset` is removed.
-        let suspend = *self.current_suspend;
-        let _reset = Reset(self.current_suspend, suspend);
-        *self.current_suspend = ptr::null();
-        assert!(!suspend.is_null());
-
-        loop {
-            let future_result = {
-                let poll_cx = *self.current_poll_cx;
-                let _reset = Reset(self.current_poll_cx, poll_cx);
-                *self.current_poll_cx = ptr::null_mut();
-                assert!(!poll_cx.is_null());
-                future.as_mut().poll(&mut *poll_cx)
-            };
-
-            match future_result {
-                Poll::Ready(t) => break Ok(t),
-                Poll::Pending => {}
-            }
-
-            (*suspend).suspend(())?;
-        }
-    }
-}
-
-unsafe impl<T> wasmtime_runtime::Store for StoreInner<T> {
-    fn vmruntime_limits(&self) -> *mut VMRuntimeLimits {
-        <StoreOpaque>::vmruntime_limits(self)
-    }
-
-    fn epoch_ptr(&self) -> *const AtomicU64 {
-        self.engine.epoch_counter() as *const _
-    }
-
-    fn externref_activations_table(
-        &mut self,
-    ) -> (
-        &mut VMExternRefActivationsTable,
-        &dyn wasmtime_runtime::ModuleInfoLookup,
-    ) {
-        let inner = &mut self.inner;
-        (&mut inner.externref_activations_table, &inner.modules)
-    }
-
-    fn memory_growing(
-        &mut self,
-        current: usize,
-        desired: usize,
-        maximum: Option<usize>,
-    ) -> Result<bool, anyhow::Error> {
-        match self.limiter {
-            Some(ResourceLimiterInner::Sync(ref mut limiter)) => {
-                limiter(&mut self.data).memory_growing(current, desired, maximum)
-            }
-            #[cfg(feature = "async")]
-            Some(ResourceLimiterInner::Async(ref mut limiter)) => unsafe {
-                self.inner
-                    .async_cx()
-                    .expect("ResourceLimiterAsync requires async Store")
-                    .block_on(
-                        limiter(&mut self.data)
-                            .memory_growing(current, desired, maximum)
-                            .as_mut(),
-                    )?
-            },
-            None => Ok(true),
-        }
-    }
-
-    fn memory_grow_failed(&mut self, error: &anyhow::Error) {
-        match self.limiter {
-            Some(ResourceLimiterInner::Sync(ref mut limiter)) => {
-                limiter(&mut self.data).memory_grow_failed(error)
-            }
-            #[cfg(feature = "async")]
-            Some(ResourceLimiterInner::Async(ref mut limiter)) => {
-                limiter(&mut self.data).memory_grow_failed(error)
-            }
-            None => {}
-        }
-    }
-
-    fn table_growing(
-        &mut self,
-        current: u32,
-        desired: u32,
-        maximum: Option<u32>,
-    ) -> Result<bool, anyhow::Error> {
-        // Need to borrow async_cx before the mut borrow of the limiter.
-        // self.async_cx() panicks when used with a non-async store, so
-        // wrap this in an option.
-        #[cfg(feature = "async")]
-        let async_cx = if self.async_support() {
-            Some(self.async_cx().unwrap())
-        } else {
-            None
-        };
-
-        match self.limiter {
-            Some(ResourceLimiterInner::Sync(ref mut limiter)) => {
-                limiter(&mut self.data).table_growing(current, desired, maximum)
-            }
-            #[cfg(feature = "async")]
-            Some(ResourceLimiterInner::Async(ref mut limiter)) => unsafe {
-                async_cx
-                    .expect("ResourceLimiterAsync requires async Store")
-                    .block_on(
-                        limiter(&mut self.data)
-                            .table_growing(current, desired, maximum)
-                            .as_mut(),
-                    )?
-            },
-            None => Ok(true),
-        }
-    }
-
-    fn table_grow_failed(&mut self, error: &anyhow::Error) {
-        match self.limiter {
-            Some(ResourceLimiterInner::Sync(ref mut limiter)) => {
-                limiter(&mut self.data).table_grow_failed(error)
-            }
-            #[cfg(feature = "async")]
-            Some(ResourceLimiterInner::Async(ref mut limiter)) => {
-                limiter(&mut self.data).table_grow_failed(error)
-            }
-            None => {}
-        }
-    }
-
-    fn out_of_gas(&mut self) -> Result<(), anyhow::Error> {
-        return match &mut self.out_of_gas_behavior {
-            OutOfGas::Trap => Err(Trap::OutOfFuel.into()),
-            #[cfg(feature = "async")]
-            OutOfGas::InjectFuel {
-                injection_count,
-                fuel_to_inject,
-            } => {
-                if *injection_count == 0 {
-                    return Err(Trap::OutOfFuel.into());
-                }
-                *injection_count -= 1;
-                let fuel = *fuel_to_inject;
-                self.async_yield_impl()?;
-                if fuel > 0 {
-                    self.add_fuel(fuel).unwrap();
-                }
-                Ok(())
-            }
-            #[cfg(not(feature = "async"))]
-            OutOfGas::InjectFuel { .. } => unreachable!(),
-        };
-    }
-
-    fn new_epoch(&mut self) -> Result<u64, anyhow::Error> {
-        // Temporarily take the configured behavior to avoid mutably borrowing
-        // multiple times.
-        let mut behavior = self.epoch_deadline_behavior.take();
-        let delta_result = match &mut behavior {
-            None => Err(Trap::Interrupt.into()),
-            Some(callback) => callback((&mut *self).as_context_mut()).and_then(|update| {
-                let delta = match update {
-                    UpdateDeadline::Continue(delta) => delta,
-
-                    #[cfg(feature = "async")]
-                    UpdateDeadline::Yield(delta) => {
-                        assert!(
-                            self.async_support(),
-                            "cannot use `UpdateDeadline::Yield` without enabling async support in the config"
-                        );
-                        // Do the async yield. May return a trap if future was
-                        // canceled while we're yielded.
-                        self.async_yield_impl()?;
-                        delta
-                    }
-                };
-
-                // Set a new deadline and return the new epoch deadline so
-                // the Wasm code doesn't have to reload it.
-                self.set_epoch_deadline(delta);
-                Ok(self.get_epoch_deadline())
-            })
-        };
-
-        // Put back the original behavior which was replaced by `take`.
-        self.epoch_deadline_behavior = behavior;
-        delta_result
-    }
-
-    #[cfg(feature = "component-model")]
-    fn component_calls(&mut self) -> &mut wasmtime_runtime::component::CallContexts {
-        &mut self.component_calls
-    }
-}
-
-impl<T> StoreInner<T> {
-    pub(crate) fn set_epoch_deadline(&mut self, delta: u64) {
-        // Set a new deadline based on the "epoch deadline delta".
-        //
-        // Safety: this is safe because the epoch deadline in the
-        // `VMRuntimeLimits` is accessed only here and by Wasm guest code
-        // running in this store, and we have a `&mut self` here.
-        //
-        // Also, note that when this update is performed while Wasm is
-        // on the stack, the Wasm will reload the new value once we
-        // return into it.
-        let epoch_deadline = unsafe { (*self.vmruntime_limits()).epoch_deadline.get_mut() };
-        *epoch_deadline = self.engine().current_epoch() + delta;
-    }
-
-    fn epoch_deadline_trap(&mut self) {
-        self.epoch_deadline_behavior = None;
-    }
-
-    fn epoch_deadline_callback(
-        &mut self,
-        callback: Box<dyn FnMut(StoreContextMut<T>) -> Result<UpdateDeadline> + Send + Sync>,
-    ) {
-        self.epoch_deadline_behavior = Some(callback);
-    }
-
-    fn epoch_deadline_async_yield_and_update(&mut self, delta: u64) {
-        assert!(
-            self.async_support(),
-            "cannot use `epoch_deadline_async_yield_and_update` without enabling async support in the config"
-        );
-        #[cfg(feature = "async")]
-        {
-            self.epoch_deadline_behavior =
-                Some(Box::new(move |_store| Ok(UpdateDeadline::Yield(delta))));
-        }
-        let _ = delta; // suppress warning in non-async build
-    }
-
-    fn get_epoch_deadline(&self) -> u64 {
-        // Safety: this is safe because, as above, it is only invoked
-        // from within `new_epoch` which is called from guest Wasm
-        // code, which will have an exclusive borrow on the Store.
-        let epoch_deadline = unsafe { (*self.vmruntime_limits()).epoch_deadline.get_mut() };
-        *epoch_deadline
-    }
-}
-
-impl<T: Default> Default for Store<T> {
-    fn default() -> Store<T> {
-        Store::new(&Engine::default(), T::default())
-    }
-}
-
-impl<T: fmt::Debug> fmt::Debug for Store<T> {
-    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
-        let inner = &**self.inner as *const StoreInner<T>;
-        f.debug_struct("Store")
-            .field("inner", &inner)
-            .field("data", &self.inner.data)
-            .finish()
-    }
-}
-
-impl<T> Drop for Store<T> {
-    fn drop(&mut self) {
-        // for documentation on this `unsafe`, see `into_data`.
-        unsafe {
-            ManuallyDrop::drop(&mut self.inner.data);
-            ManuallyDrop::drop(&mut self.inner);
-        }
-    }
-}
-
-impl Drop for StoreOpaque {
-    fn drop(&mut self) {
-        // NB it's important that this destructor does not access `self.data`.
-        // That is deallocated by `Drop for Store<T>` above.
-
-        unsafe {
-            let allocator = self.engine.allocator();
-            let ondemand = OnDemandInstanceAllocator::default();
-            for instance in self.instances.iter_mut() {
-                if instance.ondemand {
-                    ondemand.deallocate(&mut instance.handle);
-                } else {
-                    allocator.deallocate(&mut instance.handle);
-                }
-            }
-            ondemand.deallocate(&mut self.default_caller);
-
-            // See documentation for these fields on `StoreOpaque` for why they
-            // must be dropped in this order.
-            ManuallyDrop::drop(&mut self.store_data);
-            ManuallyDrop::drop(&mut self.rooted_host_funcs);
-        }
-    }
-}
-
-impl wasmtime_runtime::ModuleInfoLookup for ModuleRegistry {
-    fn lookup(&self, pc: usize) -> Option<&dyn ModuleInfo> {
-        self.lookup_module(pc)
-    }
-}
-
-struct Reset<T: Copy>(*mut T, T);
-
-impl<T: Copy> Drop for Reset<T> {
-    fn drop(&mut self) {
-        unsafe {
-            *self.0 = self.1;
-        }
-    }
-}