openstudio-standards 0.8.3 → 0.8.5.rc1

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2010/ashrae_90_1_2010.AirTerminalSingleDuctVAVReheat.rb

@@ -8,7 +8,7 @@ class ASHRAE9012010 < ASHRAE901
   # @param zone_oa_per_area [Double] the zone outdoor air per area in m^3/s*m^2
   # @return [Boolean] returns true if successful, false if not
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = case air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
+    min_damper_position = case OpenstudioStandards::HVAC.air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
                           when 'Electricity', 'NaturalGas'
                             0.3
                           else # 'HotWater', other

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2013/ashrae_90_1_2013.AirTerminalSingleDuctVAVReheat.rb

@@ -8,7 +8,7 @@ class ASHRAE9012013 < ASHRAE901
   # @param zone_oa_per_area [Double] the zone outdoor air per area in m^3/s*m^2
   # @return [Boolean] returns true if successful, false if not
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = case air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
+    min_damper_position = case OpenstudioStandards::HVAC.air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
                           when 'Electricity', 'NaturalGas'
                             0.3
                           else # 'HotWater', other

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.AirTerminalSingleDuctVAVReheat.rb

@@ -8,7 +8,7 @@ class ASHRAE9012016 < ASHRAE901
   # @param zone_oa_per_area [Double] the zone outdoor air per area in m^3/s*m^2
   # @return [Boolean] returns true if successful, false if not
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = case air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
+    min_damper_position = case OpenstudioStandards::HVAC.air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
                           when 'Electricity', 'NaturalGas'
                             0.3
                           else # 'HotWater', other

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2016/ashrae_90_1_2016.Model.rb

@@ -300,7 +300,7 @@ class ASHRAE9012016 < ASHRAE901
         key_name = space.name.to_s
       end
       light_sensor.setKeyName(key_name)
-      light_sensor_name_ems = "#{ems_friendly_name(key_name)}_LSr"
+      light_sensor_name_ems = "#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_LSr"
       light_sensor.setName(light_sensor_name_ems)
 
       # get the space floor area for calculations
@@ -328,7 +328,7 @@ class ASHRAE9012016 < ASHRAE901
         else
           light_x_actuator = OpenStudio::Model::EnergyManagementSystemActuator.new(light_x, 'Lights', 'Electricity Rate')
         end
-        light_x_actuator_name_ems = "#{ems_friendly_name(key_name)}_Light#{light_id}_Actuator"
+        light_x_actuator_name_ems = "#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_Light#{light_id}_Actuator"
         light_x_actuator.setName(light_x_actuator_name_ems)
         add_lights_prog_null += "\n      SET #{light_x_actuator_name_ems} = NULL,"
         if light_x == big_light
@@ -339,7 +339,7 @@ class ASHRAE9012016 < ASHRAE901
       end
 
       light_ems_prog = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
-      light_ems_prog.setName("SET_#{ems_friendly_name(key_name)}_Light_EMS_Program")
+      light_ems_prog.setName("SET_#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_Light_EMS_Program")
       light_ems_prog_body = <<-EMS
       SET #{light_sensor_name_ems}_IP=0.093*#{light_sensor_name_ems}/#{space_floor_area},
       IF (#{business_sensor_name} <= 0) && (#{light_sensor_name_ems}_IP >= 0.02),#{add_lights_prog_0}
@@ -349,7 +349,7 @@ class ASHRAE9012016 < ASHRAE901
       light_ems_prog.setBody(light_ems_prog_body)
 
       light_ems_prog_manager = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
-      light_ems_prog_manager.setName("SET_#{ems_friendly_name(key_name)}_Light_EMS_Program_Manager")
+      light_ems_prog_manager.setName("SET_#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_Light_EMS_Program_Manager")
       light_ems_prog_manager.setCallingPoint('AfterPredictorAfterHVACManagers')
       light_ems_prog_manager.addProgram(light_ems_prog)
     end

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.AirTerminalSingleDuctVAVReheat.rb

@@ -8,7 +8,7 @@ class ASHRAE9012019 < ASHRAE901
   # @param zone_oa_per_area [Double] the zone outdoor air per area in m^3/s*m^2
   # @return [Boolean] returns true if successful, false if not
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = case air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
+    min_damper_position = case OpenstudioStandards::HVAC.air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
                           when 'Electricity', 'NaturalGas'
                             0.3
                           else # 'HotWater', other

data/lib/openstudio-standards/prototypes/ashrae_90_1/ashrae_90_1_2019/ashrae_90_1_2019.Model.rb

@@ -300,7 +300,7 @@ class ASHRAE9012019 < ASHRAE901
         key_name = space.name.to_s
       end
       light_sensor.setKeyName(key_name)
-      light_sensor_name_ems = "#{ems_friendly_name(key_name)}_LSr"
+      light_sensor_name_ems = "#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_LSr"
       light_sensor.setName(light_sensor_name_ems)
 
       # get the space floor area for calculations
@@ -328,7 +328,7 @@ class ASHRAE9012019 < ASHRAE901
         else
           light_x_actuator = OpenStudio::Model::EnergyManagementSystemActuator.new(light_x, 'Lights', 'Electricity Rate')
         end
-        light_x_actuator_name_ems = "#{ems_friendly_name(key_name)}_Light#{light_id}_Actuator"
+        light_x_actuator_name_ems = "#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_Light#{light_id}_Actuator"
         light_x_actuator.setName(light_x_actuator_name_ems)
         add_lights_prog_null += "\n      SET #{light_x_actuator_name_ems} = NULL,"
         if light_x == big_light
@@ -339,7 +339,7 @@ class ASHRAE9012019 < ASHRAE901
       end
 
       light_ems_prog = OpenStudio::Model::EnergyManagementSystemProgram.new(model)
-      light_ems_prog.setName("SET_#{ems_friendly_name(key_name)}_Light_EMS_Program")
+      light_ems_prog.setName("SET_#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_Light_EMS_Program")
       light_ems_prog_body = <<-EMS
       SET #{light_sensor_name_ems}_IP=0.093*#{light_sensor_name_ems}/#{space_floor_area},
       IF (#{business_sensor_name} <= 0) && (#{light_sensor_name_ems}_IP >= 0.02),#{add_lights_prog_0}
@@ -349,7 +349,7 @@ class ASHRAE9012019 < ASHRAE901
       light_ems_prog.setBody(light_ems_prog_body)
 
       light_ems_prog_manager = OpenStudio::Model::EnergyManagementSystemProgramCallingManager.new(model)
-      light_ems_prog_manager.setName("SET_#{ems_friendly_name(key_name)}_Light_EMS_Program_Manager")
+      light_ems_prog_manager.setName("SET_#{OpenstudioStandards::HVAC.ems_friendly_name(key_name)}_Light_EMS_Program_Manager")
       light_ems_prog_manager.setCallingPoint('AfterPredictorAfterHVACManagers')
       light_ems_prog_manager.addProgram(light_ems_prog)
     end

data/lib/openstudio-standards/prototypes/ashrae_90_1/nrel_nze_ready_2017/nrel_zne_ready_2017.AirTerminalSingleDuctVAVReheat.rb

@@ -8,7 +8,7 @@ class NRELZNEReady2017 < ASHRAE901
   # @param zone_oa_per_area [Double] the zone outdoor air per area in m^3/s*m^2
   # @return [Boolean] returns true if successful, false if not
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = case air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
+    min_damper_position = case OpenstudioStandards::HVAC.air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
                           when 'HotWater'
                             0.2
                           when 'Electricity', 'NaturalGas'

data/lib/openstudio-standards/prototypes/ashrae_90_1/ze_aedg_multifamily/ze_aedg_multifamily.AirTerminalSingleDuctVAVReheat.rb

@@ -8,7 +8,7 @@ class ZEAEDGMultifamily < ASHRAE901
   # @param zone_oa_per_area [Double] the zone outdoor air per area in m^3/s*m^2
   # @return [Boolean] returns true if successful, false if not
   def air_terminal_single_duct_vav_reheat_apply_initial_prototype_damper_position(air_terminal_single_duct_vav_reheat, zone_oa_per_area)
-    min_damper_position = case air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
+    min_damper_position = case OpenstudioStandards::HVAC.air_terminal_single_duct_vav_reheat_reheat_type(air_terminal_single_duct_vav_reheat)
                           when 'HotWater'
                             0.2
                           when 'Electricity', 'NaturalGas'

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.HighRiseApartment.rb

@@ -37,13 +37,12 @@ module HighriseApartment
                                         'Electric Equipment Electricity Energy'
                                       end
 
-    model_add_transformer(model,
-                          wired_lighting_frac: 0.0015,
-                          transformer_size: 75000,
-                          transformer_efficiency: transformer_efficiency,
-                          excluded_interiorequip_key: 'T Corridor_Elevators_Equip',
-                          excluded_interiorequip_meter: excluded_interiorequip_variable)
-
+    OpenstudioStandards::Equipment.create_transformer(model,
+                                                      wired_lighting_frac: 0.0015,
+                                                      transformer_size: 75000,
+                                                      transformer_efficiency: transformer_efficiency,
+                                                      excluded_interiorequip_key: 'T Corridor_Elevators_Equip',
+                                                      excluded_interiorequip_meter: excluded_interiorequip_variable)
     return true
   end
 

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.Hospital.rb

@@ -25,10 +25,10 @@ module Hospital
     end
 
     unless transformer_efficiency.nil?
-      model_add_transformer(model,
-                            wired_lighting_frac: 0.022,
-                            transformer_size: 500000,
-                            transformer_efficiency: transformer_efficiency)
+      OpenstudioStandards::Equipment.create_transformer(model,
+                                                        wired_lighting_frac: 0.022,
+                                                        transformer_size: 500000,
+                                                        transformer_efficiency: transformer_efficiency)
     end
 
     # add extra equipment for kitchen
@@ -85,10 +85,10 @@ module Hospital
 
         # replace main supply air fan
         air_loop.supplyFan.get.remove
-        fan = create_fan_by_name(model,
-                                 'Hospital_CAV_Sytem_Fan',
-                                 fan_name: "#{air_loop.name} Fan",
-                                 end_use_subcategory: 'CAV System Fans')
+        fan = OpenstudioStandards::HVAC.create_typical_fan(model,
+                                                           'Hospital_CAV_Sytem_Fan',
+                                                           fan_name: "#{air_loop.name} Fan",
+                                                           end_use_subcategory: 'CAV System Fans')
         fan.setAvailabilitySchedule(model.alwaysOnDiscreteSchedule)
         fan.addToNode(air_loop.supplyOutletNode)
 
@@ -276,13 +276,13 @@ module Hospital
         humidity_spm = OpenStudio::Model::SetpointManagerSingleZoneHumidityMinimum.new(model)
         case template
         when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
-          create_coil_heating_electric(model,
-                                       air_loop_node: supply_outlet_node,
-                                       name: "#{space_name} Electric Htg Coil")
-          create_coil_heating_water(model,
-                                    hot_water_loop,
-                                    air_loop_node: supply_outlet_node,
-                                    name: "#{space_name} Water Htg Coil")
+          OpenstudioStandards::HVAC.create_coil_heating_electric(model,
+                                                                 air_loop_node: supply_outlet_node,
+                                                                 name: "#{space_name} Electric Htg Coil")
+          OpenstudioStandards::HVAC.create_coil_heating_water(model,
+                                                              hot_water_loop,
+                                                              air_loop_node: supply_outlet_node,
+                                                              name: "#{space_name} Water Htg Coil")
         end
         # humidity_spm.addToNode(supply_outlet_node)
         humidity_spm.addToNode(humidifier.outletModelObject.get.to_Node.get)

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.LargeHotel.rb

@@ -25,10 +25,10 @@ module LargeHotel
     end
     return true if transformer_efficiency.nil?
 
-    model_add_transformer(model,
-                          wired_lighting_frac: 0.0352,
-                          transformer_size: 150000,
-                          transformer_efficiency: transformer_efficiency)
+    OpenstudioStandards::Equipment.create_transformer(model,
+                                                      wired_lighting_frac: 0.0352,
+                                                      transformer_size: 150000,
+                                                      transformer_efficiency: transformer_efficiency)
 
     # add extra equipment for kitchen
     add_extra_equip_kitchen(model)

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.LargeOffice.rb

@@ -32,11 +32,11 @@ module LargeOffice
       end
     end
 
-    model_add_transformer(model,
-                          wired_lighting_frac: 0.0281,
-                          transformer_size: 500000,
-                          transformer_efficiency: transformer_efficiency,
-                          excluded_interiorequip_meter: 'DataCenterPlugLoads:InteriorEquipment:Electricity')
+    OpenstudioStandards::Equipment.create_transformer(model,
+                                                      wired_lighting_frac: 0.0281,
+                                                      transformer_size: 500000,
+                                                      transformer_efficiency: transformer_efficiency,
+                                                      excluded_interiorequip_meter: 'DataCenterPlugLoads:InteriorEquipment:Electricity')
 
     system_to_space_map = define_hvac_system_map(building_type, climate_zone)
 

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.MediumOffice.rb

@@ -32,12 +32,12 @@ module MediumOffice
                                         'Electric Equipment Electricity Energy'
                                       end
 
-    model_add_transformer(model,
-                          wired_lighting_frac: 0.0281,
-                          transformer_size: 45000,
-                          transformer_efficiency: transformer_efficiency,
-                          excluded_interiorequip_key: '2 Elevator Lift Motors',
-                          excluded_interiorequip_meter: excluded_interiorequip_variable)
+    OpenstudioStandards::Equipment.create_transformer(model,
+                                                      wired_lighting_frac: 0.0281,
+                                                      transformer_size: 45000,
+                                                      transformer_efficiency: transformer_efficiency,
+                                                      excluded_interiorequip_key: '2 Elevator Lift Motors',
+                                                      excluded_interiorequip_meter: excluded_interiorequip_variable)
 
     model.getSpaces.sort.each do |space|
       if space.name.get.to_s == 'Core_bottom'

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.Outpatient.rb

@@ -273,13 +273,13 @@ module Outpatient
         humidity_spm = OpenStudio::Model::SetpointManagerSingleZoneHumidityMinimum.new(model)
         case template
           when '90.1-2004', '90.1-2007', '90.1-2010', '90.1-2013', '90.1-2016', '90.1-2019'
-            create_coil_heating_electric(model,
-                                         air_loop_node: supply_outlet_node,
-                                         name: 'AHU1 extra Electric Htg Coil')
-            create_coil_heating_water(model,
-                                      hot_water_loop,
-                                      air_loop_node: supply_outlet_node,
-                                      name: 'AHU1 extra Water Htg Coil')
+            OpenstudioStandards::HVAC.create_coil_heating_electric(model,
+                                                                   air_loop_node: supply_outlet_node,
+                                                                   name: 'AHU1 extra Electric Htg Coil')
+            OpenstudioStandards::HVAC.create_coil_heating_water(model,
+                                                                hot_water_loop,
+                                                                air_loop_node: supply_outlet_node,
+                                                                name: 'AHU1 extra Water Htg Coil')
         end
         # humidity_spm.addToNode(supply_outlet_node)
         humidity_spm.addToNode(humidifier.outletModelObject.get.to_Node.get)

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.PrimarySchool.rb

@@ -25,10 +25,10 @@ module PrimarySchool
     end
     return true if transformer_efficiency.nil?
 
-    model_add_transformer(model,
-                          wired_lighting_frac: 0.0119,
-                          transformer_size: 112500,
-                          transformer_efficiency: transformer_efficiency)
+    OpenstudioStandards::Equipment.create_transformer(model,
+                                                      wired_lighting_frac: 0.0119,
+                                                      transformer_size: 112500,
+                                                      transformer_efficiency: transformer_efficiency)
 
     # add extra equipment for kitchen
     add_extra_equip_kitchen(model)

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.SecondarySchool.rb

@@ -32,12 +32,12 @@ module SecondarySchool
                                         'Electric Equipment Electricity Energy'
                                       end
 
-    model_add_transformer(model,
-                          wired_lighting_frac: 0.0194,
-                          transformer_size: 225000,
-                          transformer_efficiency: transformer_efficiency,
-                          excluded_interiorequip_key: '2 Elevator Lift Motors',
-                          excluded_interiorequip_meter: excluded_interiorequip_variable)
+    OpenstudioStandards::Equipment.create_transformer(model,
+                                                      wired_lighting_frac: 0.0194,
+                                                      transformer_size: 225000,
+                                                      transformer_efficiency: transformer_efficiency,
+                                                      excluded_interiorequip_key: '2 Elevator Lift Motors',
+                                                      excluded_interiorequip_meter: excluded_interiorequip_variable)
 
     # add extra equipment for kitchen
     add_extra_equip_kitchen(model)

data/lib/openstudio-standards/prototypes/common/buildings/Prototype.SmallOfficeDetailed.rb

@@ -68,7 +68,11 @@ module SmallOfficeDetailed
     # add extra infiltration for attic in m3/s (there is no attic in 'DOE Ref Pre-1980')
     return false if template == 'DOE Ref 1980-2004' || template == 'DOE Ref Pre-1980'
 
-    entry_space = model.getSpaceByName('Attic').get
+    if model.getSpaceByName('Attic').is_initialized
+      entry_space = model.getSpaceByName('Attic').get
+    elsif model.getSpaceByName('Attic 1').is_initialized
+      entry_space = model.getSpaceByName('Attic 1').get
+    end
     infiltration_attic = OpenStudio::Model::SpaceInfiltrationDesignFlowRate.new(model)
     infiltration_attic.setName('attic Infiltration')
     infiltration_per_zone_attic = 0.2001