openstudio-standards 0.2.14 → 0.2.15.pre.rc1

data/lib/openstudio-standards/standards/necb/BTAPPRE1980/hvac_system_6.rb

@@ -1,5 +1,4 @@
 class BTAPPRE1980
-
   # end add_sys4_single_zone_make_up_air_unit_with_baseboard_heating
 
   def add_sys6_multi_zone_built_up_system_with_baseboard_heating(model:,
@@ -24,7 +23,7 @@ class BTAPPRE1980
     # "chiller_type": "Scroll";"Centrifugal";""Screw";"Reciprocating"
     # "fan_type": "AF_or_BI_rdg_fancurve";"AF_or_BI_inletvanes";"fc_inletvanes";"var_speed_drive"
     #
-    system_data = Hash.new
+    system_data = {}
     system_data[:name] = 'Sys_6_VAV with Reheat'
     system_data[:CentralCoolingDesignSupplyAirTemperature] = 13.0
     system_data[:CentralHeatingDesignSupplyAirTemperature] = 20.0
@@ -32,8 +31,7 @@ class BTAPPRE1980
     system_data[:AllOutdoorAirinHeating] = false
     system_data[:MinimumSystemAirFlowRatio] = 0.3
 
-    
-    #zone data
+    # zone data
     system_data[:max_system_supply_air_temperature] = 43.0
     system_data[:min_system_supply_air_temperature] = 13.0
     system_data[:ZoneCoolingDesignSupplyAirTemperature] = 13.0
@@ -49,18 +47,18 @@ class BTAPPRE1980
     # Chilled Water Plant
 
     chw_loop = OpenStudio::Model::PlantLoop.new(model)
-    chiller1, chiller2 = self.setup_chw_loop_with_components(model, chw_loop, chiller_type)
+    chiller1, chiller2 = setup_chw_loop_with_components(model, chw_loop, chiller_type)
 
     # Condenser System
 
     cw_loop = OpenStudio::Model::PlantLoop.new(model)
-    ctower = self.setup_cw_loop_with_components(model, cw_loop, chiller1, chiller2)
+    ctower = setup_cw_loop_with_components(model, cw_loop, chiller1, chiller2)
 
     # Make a Packaged VAV w/ PFP Boxes for each story of the building
     model.getBuildingStorys.sort.each do |story|
       unless (BTAP::Geometry::BuildingStoreys.get_zones_from_storey(story) & zones).empty?
 
-        air_loop = common_air_loop( model: model, system_data: system_data)
+        air_loop = common_air_loop(model: model, system_data: system_data)
         air_loop.setName('Sys_6_VAV with Reheat')
 
         supply_fan = OpenStudio::Model::FanVariableVolume.new(model, always_on)
@@ -82,6 +80,10 @@ class BTAPPRE1980
         oa_controller = OpenStudio::Model::ControllerOutdoorAir.new(model)
         oa_controller.autosizeMinimumOutdoorAirFlowRate
 
+        # Set mechanical ventilation controller outdoor air to ZoneSum (used to be defaulted to ZoneSum but now should be
+        # set explicitly)
+        oa_controller.controllerMechanicalVentilation.setSystemOutdoorAirMethod('ZoneSum')
+
         oa_system = OpenStudio::Model::AirLoopHVACOutdoorAirSystem.new(model, oa_controller)
 
         # Add the components to the air loop
@@ -98,11 +100,11 @@ class BTAPPRE1980
         # Add a setpoint manager to control the supply air.  The controller will set the supply air to be the warmest
         # that can still meet the cooling load of the warmest thermal zone it services.  This differs from the NECB
         # which uses a constant 13 C supply air temperature.
-        #sat_sch = OpenStudio::Model::ScheduleRuleset.new(model)
-        #sat_sch.setName('Supply Air Temp')
-        #sat_sch.defaultDaySchedule.setName('Supply Air Temp Default')
-        #sat_sch.defaultDaySchedule.addValue(OpenStudio::Time.new(0, 24, 0, 0), system_data[:system_supply_air_temperature])
-        #sat_stpt_manager = OpenStudio::Model::SetpointManagerScheduled.new(model, sat_sch)
+        # sat_sch = OpenStudio::Model::ScheduleRuleset.new(model)
+        # sat_sch.setName('Supply Air Temp')
+        # sat_sch.defaultDaySchedule.setName('Supply Air Temp Default')
+        # sat_sch.defaultDaySchedule.addValue(OpenStudio::Time.new(0, 24, 0, 0), system_data[:system_supply_air_temperature])
+        # sat_stpt_manager = OpenStudio::Model::SetpointManagerScheduled.new(model, sat_sch)
         sat_stpt_manager = OpenStudio::Model::SetpointManagerWarmest.new(model)
         sat_stpt_manager.setMaximumSetpointTemperature(system_data[:max_system_supply_air_temperature])
         sat_stpt_manager.setMinimumSetpointTemperature(system_data[:min_system_supply_air_temperature])
@@ -128,7 +130,7 @@ class BTAPPRE1980
           vav_terminal = OpenStudio::Model::AirTerminalSingleDuctVAVReheat.new(model, always_on, reheat_coil)
           air_loop.addBranchForZone(zone, vav_terminal.to_StraightComponent)
           # NECB2011 minimum zone airflow setting
-          vav_terminal.setFixedMinimumAirFlowRate(system_data[:ZoneVAVMinFlowFactorPerFloorArea] * zone.floorArea )
+          vav_terminal.setFixedMinimumAirFlowRate(system_data[:ZoneVAVMinFlowFactorPerFloorArea] * zone.floorArea)
           vav_terminal.setMaximumReheatAirTemperature(system_data[:ZoneVAVMaxReheatTemp])
           vav_terminal.setDamperHeatingAction(system_data[:ZoneVAVDamperAction])
 
@@ -141,19 +143,20 @@ class BTAPPRE1980
 
         # Modifying airloop name.
         sys_name_pars = {}
-        sys_name_pars["sys_hr"] = "none"
-        sys_name_pars["sys_htg"] = heating_coil_type
-        sys_name_pars["sys_clg"] = "Chilled Water"
-        sys_name_pars["sys_sf"] = "vv"
-        sys_name_pars["zone_htg"] = baseboard_type
-        sys_name_pars["zone_clg"] = "none"
-        sys_name_pars["sys_rf"] = "vv"
+        sys_name_pars['sys_hr'] = 'none'
+        sys_name_pars['sys_htg'] = heating_coil_type
+        sys_name_pars['sys_clg'] = 'Chilled Water'
+        sys_name_pars['sys_sf'] = 'vv'
+        sys_name_pars['zone_htg'] = baseboard_type
+        sys_name_pars['zone_clg'] = 'none'
+        sys_name_pars['sys_rf'] = 'vv'
         assign_base_sys_name(air_loop,
-                             sys_abbr: "sys_6",
-                             sys_oa: "mixed",
+                             sys_abbr: 'sys_6',
+                             sys_oa: 'mixed',
                              sys_name_pars: sys_name_pars)
       end
-    end # next story
+    end
+    # next story
 
     # for debugging
     # puts "end add_sys6_multi_zone_built_up_with_baseboard_heating"
@@ -161,16 +164,15 @@ class BTAPPRE1980
     return true
   end
 
-
-
-
-  def new_add_sys6_multi_zone_built_up_system_with_baseboard_heating(model:,
-                                                                 zones:,
-                                                                 heating_coil_type:,
-                                                                 baseboard_type:,
-                                                                 chiller_type:,
-                                                                 fan_type:,
-                                                                 hw_loop:)
+  def new_add_sys6_multi_zone_built_up_system_with_baseboard_heating(
+    model:,
+    zones:,
+    heating_coil_type:,
+    baseboard_type:,
+    chiller_type:,
+    fan_type:,
+    hw_loop:
+  )
     # System Type 6: VAV w/ Reheat
     # This measure creates:
     # a single hot water loop with a natural gas or electric boiler or for the building
@@ -185,14 +187,14 @@ class BTAPPRE1980
     # "baseboard_type": "Electric" and "Hot Water"
     # "chiller_type": "Scroll";"Centrifugal";""Screw";"Reciprocating"
     # "fan_type": "AF_or_BI_rdg_fancurve";"AF_or_BI_inletvanes";"fc_inletvanes";"var_speed_drive"
-    system_6_data = Hash.new
+    system_6_data = {}
     system_6_data[:name] = 'Sys_6_VAV with Reheat'
     system_6_data[:CentralCoolingDesignSupplyAirTemperature] = 13.0
     system_6_data[:CentralHeatingDesignSupplyAirTemperature] = 20.0
     system_6_data[:AllOutdoorAirinCooling] = false
     system_6_data[:AllOutdoorAirinHeating] = false
     system_6_data[:MinimumSystemAirFlowRatio] = 0.03
-    #zone data
+    # zone data
     system_6_data[:max_system_supply_air_temperature] = 43.0
     system_6_data[:min_system_supply_air_temperature] = 13.0
     system_6_data[:ZoneCoolingDesignSupplyAirTemperature] = 13.0
@@ -209,12 +211,12 @@ class BTAPPRE1980
     # Chilled Water Plant
 
     chw_loop = OpenStudio::Model::PlantLoop.new(model)
-    chiller1, chiller2 = self.setup_chw_loop_with_components(model, chw_loop, chiller_type)
+    chiller1, chiller2 = setup_chw_loop_with_components(model, chw_loop, chiller_type)
 
     # Condenser System
 
     cw_loop = OpenStudio::Model::PlantLoop.new(model)
-    ctower = self.setup_cw_loop_with_components(model, cw_loop, chiller1, chiller2)
+    ctower = setup_cw_loop_with_components(model, cw_loop, chiller1, chiller2)
 
     # Make a Packaged VAV w/ PFP Boxes for each story of the building
     model.getBuildingStorys.sort.each do |story|
@@ -223,13 +225,12 @@ class BTAPPRE1980
         air_loop = common_air_loop(model: model, system_data: system_data)
         air_loop.setName(system_data[:name])
         air_loop_sizing = air_loop.sizingSystem
-        air_loop_sizing.setCentralCoolingDesignSupplyAirTemperature(system_data[:CentralCoolingDesignSupplyAirTemperature] )
-        air_loop_sizing.setCentralHeatingDesignSupplyAirTemperature(system_data[:CentralHeatingDesignSupplyAirTemperature] )
+        air_loop_sizing.setCentralCoolingDesignSupplyAirTemperature(system_data[:CentralCoolingDesignSupplyAirTemperature])
+        air_loop_sizing.setCentralHeatingDesignSupplyAirTemperature(system_data[:CentralHeatingDesignSupplyAirTemperature])
         air_loop_sizing.setAllOutdoorAirinCooling(system_data[:AllOutdoorAirinCooling])
         air_loop_sizing.setAllOutdoorAirinHeating(system_data[:AllOutdoorAirinHeating])
         air_loop_sizing.setMinimumSystemAirFlowRatio(system_data[:MinimumSystemAirFlowRatio])
 
-
         supply_fan = OpenStudio::Model::FanVariableVolume.new(model, always_on)
         supply_fan.setName('Sys6 Supply Fan')
         return_fan = OpenStudio::Model::FanVariableVolume.new(model, always_on)
@@ -249,6 +250,10 @@ class BTAPPRE1980
         oa_controller = OpenStudio::Model::ControllerOutdoorAir.new(model)
         oa_controller.autosizeMinimumOutdoorAirFlowRate
 
+        # Set mechanical ventilation controller outdoor air to ZoneSum (used to be defaulted to ZoneSum but now should be
+        # set explicitly)
+        oa_controller.controllerMechanicalVentilation.setSystemOutdoorAirMethod('ZoneSum')
+
         oa_system = OpenStudio::Model::AirLoopHVACOutdoorAirSystem.new(model, oa_controller)
 
         # Add the components to the air loop
@@ -266,10 +271,10 @@ class BTAPPRE1980
         # that can still meet the cooling load of the warmest thermal zone it services.  This differs from the NECB
         # which uses a constant 13 C supply air temperature.
 
-        #sat_sch = OpenStudio::Model::ScheduleRuleset.new(model)
-        #sat_sch.setName('Supply Air Temp')
-        #sat_sch.defaultDaySchedule.setName('Supply Air Temp Default')
-        #sat_sch.defaultDaySchedule.addValue(OpenStudio::Time.new(0, 24, 0, 0), system_data[:system_supply_air_temperature])
+        # sat_sch = OpenStudio::Model::ScheduleRuleset.new(model)
+        # sat_sch.setName('Supply Air Temp')
+        # sat_sch.defaultDaySchedule.setName('Supply Air Temp Default')
+        # sat_sch.defaultDaySchedule.addValue(OpenStudio::Time.new(0, 24, 0, 0), system_data[:system_supply_air_temperature])
         sat_stpt_manager = OpenStudio::Model::SetpointManagerWarmest.new(model)
         sat_stpt_manager.setMaximumSetpointTemperature(system_data[:max_system_supply_air_temperature])
         sat_stpt_manager.setMinimumSetpointTemperature(system_data[:min_system_supply_air_temperature])
@@ -299,7 +304,6 @@ class BTAPPRE1980
           vav_terminal.setMaximumReheatAirTemperature(system_data[:ZoneVAVMaxReheatTemp])
           vav_terminal.setDamperHeatingAction(system_data[:ZoneVAVDamperAction])
 
-
           # Set zone baseboards
           add_zone_baseboards(model: model,
                               zone: zone,
@@ -307,11 +311,12 @@ class BTAPPRE1980
                               hw_loop: hw_loop)
         end
       end
-    end # next story
+    end
+    # next story
 
     # for debugging
     # puts "end add_sys6_multi_zone_built_up_with_baseboard_heating"
 
     return true
   end
-end
+end

data/lib/openstudio-standards/standards/necb/BTAPPRE1980/hvac_systems.rb

@@ -33,7 +33,7 @@ class BTAPPRE1980
     if (capacity_w / 1000.0) <= 700.0
       # As per MNECB if chiller capacity <= 700 kW the compressor should be reciprocating so change the type here in
       # the name, compressor_type and search_criteria which is where the compressor type is used.
-      search_criteria['compressor_type'] = "Reciprocating"
+      search_criteria['compressor_type'] = 'Reciprocating'
       compressor_type = search_criteria['compressor_type']
       chiller_electric_eir = replace_compressor_name(chiller: chiller_electric_eir, comp_type: compressor_type, chillers: chillers)
       if chiller_electric_eir.name.to_s.include? 'Primary Chiller'
@@ -44,7 +44,7 @@ class BTAPPRE1980
     elsif ((capacity_w / 1000.0) > 700.0) && ((capacity_w / 1000.0) <= 2100.0)
       # As per MNECB if chiller capacity > 700 kW the compressor should be centrifugal so change the type here in
       # the name, compressor_type and search_criteria which is where the compressor type is used.
-      search_criteria['compressor_type'] = "Centrifugal"
+      search_criteria['compressor_type'] = 'Centrifugal'
       compressor_type = search_criteria['compressor_type']
       chiller_electric_eir = replace_compressor_name(chiller: chiller_electric_eir, comp_type: compressor_type, chillers: chillers)
       if chiller_electric_eir.name.to_s.include? 'Primary Chiller'
@@ -53,7 +53,7 @@ class BTAPPRE1980
         chiller_capacity = 0.001
       end
     else
-      search_criteria['compressor_type'] = "Centrifugal"
+      search_criteria['compressor_type'] = 'Centrifugal'
       compressor_type = search_criteria['compressor_type']
       chiller_electric_eir = replace_compressor_name(chiller: chiller_electric_eir, comp_type: compressor_type, chillers: chillers)
       chiller_capacity = capacity_w / 2.0
@@ -160,9 +160,9 @@ class BTAPPRE1980
 
     # Assuming all pump motors are 4-pole ODP
     search_criteria = {
-        'motor_use' => 'PUMP',
-        'number_of_poles' => 4.0,
-        'type' => 'Enclosed'
+      'motor_use' => 'PUMP',
+      'number_of_poles' => 4.0,
+      'type' => 'Enclosed'
     }
 
     motor_properties = model_find_object(motors, search_criteria, motor_bhp)
@@ -193,11 +193,11 @@ class BTAPPRE1980
   end
 
   # Replace the chiller compressor type in the chiller name.
-  def replace_compressor_name(chiller: ,comp_type:, chillers:)
+  def replace_compressor_name(chiller:, comp_type:, chillers:)
     # Get the current name.
     chiller_name = chiller.name.to_s
     # Get the unique compressor types from the chiller table (from the chillers.json file.)
-    chiller_types = chillers.uniq{|chill_param| chill_param['compressor_type']}
+    chiller_types = chillers.uniq { |chill_param| chill_param['compressor_type'] }
     new_name = chiller_name
     # Go through each chiller compressor type from the chiller table and see if it is in the chiller name.  If it is,
     # then replace the old compressor type in the name with the new one.
@@ -222,12 +222,14 @@ class BTAPPRE1980
     # type of plant loop get the combined pump efficiency from pump_data
     pump.plantLoop.get.supplyComponents.each do |comp|
       obj_type = comp.iddObjectType.valueName.to_s
-      break if pump_info = pump_data.find { |pump| pump['components'].find {|component| component.include?(obj_type)}}
+      break if pump_info == pump_data.find { |plant_pump| plant_pump['components'].find { |component| component.include?(obj_type) } }
     end
+
     return if pump_info.nil?
+
     # DesignShaftPowerPerUnitFlowRatePerUnitHead seems to be the inverse of an efficiency so get the inverse efficiency
     # by dividing the motor efficiency from the total pump efficiency.
-    inv_impeller_eff = motor_eff/pump_info['comb_eff'].to_f
+    inv_impeller_eff = motor_eff / pump_info['comb_eff'].to_f
     pump.setDesignShaftPowerPerUnitFlowRatePerUnitHead(inv_impeller_eff)
   end
 
@@ -236,27 +238,28 @@ class BTAPPRE1980
   # I wrote this.  So far it applies fan performance to system 3 return fans and to zone exhaust fans which were added
   # to BTAPPRE1980 and BTAP1980TO2010 since they are not used in NECB2011, NECB2015, or NECB2017.
   def model_apply_existing_building_fan_performance(model:)
-    ret_fans = model.getFanConstantVolumes.select {|ret_fan| ret_fan.endUseSubcategory.to_s == "Return_Fan"}
-    unless ret_fans.empty?
-      fan_type = 'CONSTANT-RETURN'
-      motor_type = 'CONSTANT-RETURN'
-      pressure_rise = 'return_fan_constant_volume_pressure_rise_value'
-      fan_hash = get_fan_chars(fan_type: fan_type, motor_type: motor_type, press_rise: pressure_rise)
-      ret_fans.each do |ret_fan|
-        ret_fan.setPressureRise(fan_hash[:press_rise].to_f)
-        ret_fan.setFanTotalEfficiency(fan_hash[:total_eff].to_f)
-        ret_fan.setMotorEfficiency(fan_hash[:motor_eff].to_f)
-      end
-      exhaust_fans = model.getFanZoneExhausts
-      unless exhaust_fans.empty?
-        fan_type = 'EXHAUST'
-        pressure_rise = 'exhaust_fan_pressure_rise_value'
-        fan_hash = get_fan_chars(fan_type: fan_type, press_rise: pressure_rise)
-        exhaust_fans.sort.each do |exhaust_fan|
-          exhaust_fan.setFanTotalEfficiency(fan_hash[:total_eff])
-          exhaust_fan.setPressureRise(fan_hash[:press_rise])
-        end
-      end
+    ret_fans = model.getFanConstantVolumes.select { |ret_fan| ret_fan.endUseSubcategory.to_s == 'Return_Fan' }
+    return if ret_fans.empty?
+
+    fan_type = 'CONSTANT-RETURN'
+    motor_type = 'CONSTANT-RETURN'
+    pressure_rise = 'return_fan_constant_volume_pressure_rise_value'
+    fan_hash = get_fan_chars(fan_type: fan_type, motor_type: motor_type, press_rise: pressure_rise)
+    ret_fans.each do |ret_fan|
+      ret_fan.setPressureRise(fan_hash[:press_rise].to_f)
+      ret_fan.setFanTotalEfficiency(fan_hash[:total_eff].to_f)
+      ret_fan.setMotorEfficiency(fan_hash[:motor_eff].to_f)
+    end
+    exhaust_fans = model.getFanZoneExhausts
+
+    return if exhaust_fans.empty?
+
+    fan_type = 'EXHAUST'
+    pressure_rise = 'exhaust_fan_pressure_rise_value'
+    fan_hash = get_fan_chars(fan_type: fan_type, press_rise: pressure_rise)
+    exhaust_fans.sort.each do |exhaust_fan|
+      exhaust_fan.setFanTotalEfficiency(fan_hash[:total_eff])
+      exhaust_fan.setPressureRise(fan_hash[:press_rise])
     end
   end
 
@@ -269,32 +272,32 @@ class BTAPPRE1980
   # If the above cannot be found it defaults values (this should not happen).
   # The method return a hash containing the total fan efficiency, motor efficiency and pressure rise.
   def get_fan_chars(fan_type:, motor_type: nil, press_rise:)
-    standards_fan_total_efficiency = @standards_data["fans"].select {|standards_fan| standards_fan["fan_type"] == fan_type}
+    standards_fan_total_efficiency = @standards_data['fans'].select { |standards_fan| standards_fan['fan_type'] == fan_type }
     if standards_fan_total_efficiency.empty?
       fan_total_efficiency = 0.25
       OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.model_apply_existing_building_fan_characteristics', "Cannot find fan data in standards fans data.  Defaulting total fan efficiency to #{fan_total_efficiency}.")
     else
-      fan_total_efficiency = standards_fan_total_efficiency[0]["fan_total_efficiency"]
+      fan_total_efficiency = standards_fan_total_efficiency[0]['fan_total_efficiency']
     end
     fan_motor_efficiency = nil
     unless motor_type.nil?
-      standards_fan_motor_efficiency = @standards_data["motors"].select {|standards_motor| (standards_motor["motor_use"] == "FAN" && standards_motor["motor_type"] == motor_type)}
+      standards_fan_motor_efficiency = @standards_data['motors'].select { |standards_motor| (standards_motor['motor_use'] == 'FAN' && standards_motor['motor_type'] == motor_type) }
       if standards_fan_motor_efficiency.empty?
         fan_motor_efficiency = 0.385
         OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.model_apply_existing_building_fan_characteristics', "Cannot find fan motor data in standards fans data.  Defaulting fan moter efficinecy to #{fan_motor_efficiency}.")
       else
-        fan_motor_efficiency = standards_fan_motor_efficiency[0]["nominal_full_load_efficiency"]
+        fan_motor_efficiency = standards_fan_motor_efficiency[0]['nominal_full_load_efficiency']
       end
     end
-    fan_pressure_rise = @standards_data["constants"][press_rise]["value"]
+    fan_pressure_rise = @standards_data['constants'][press_rise]['value']
     if fan_pressure_rise.nil?
       fan_pressure_rise = 150.0
       OpenStudio.logFree(OpenStudio::Warn, 'openstudio.standards.model_apply_existing_building_fan_characteristics', "Cannot find fan pressure data in constants data.  Defaulting total fan pressure rise to #{fan_pressure_rise}.")
     end
     return {
-        total_eff: fan_total_efficiency,
-        motor_eff: fan_motor_efficiency,
-        press_rise: fan_pressure_rise
+      total_eff: fan_total_efficiency,
+      motor_eff: fan_motor_efficiency,
+      press_rise: fan_pressure_rise
     }
   end
 
@@ -305,7 +308,7 @@ class BTAPPRE1980
     zone.spaces.sort.each do |space|
       outdoor_air_rate = space.designSpecificationOutdoorAir.get.outdoorAirFlowperFloorArea
       floor_area = space.floorArea
-      outdoor_air += (outdoor_air_rate*floor_area)
+      outdoor_air += (outdoor_air_rate * floor_area)
     end
     exhaust_fan = OpenStudio::Model::FanZoneExhaust.new(model)
     exhaust_fan.setName(name)

data/lib/openstudio-standards/standards/necb/ECMS/data/boiler_set.json

@@ -11,12 +11,30 @@
           "part_load_curve": null,
           "notes": "Do nothing."
         },
+        {
+          "name": "NECB 85% Efficient Condensing Boiler",
+          "efficiency": 0.85,
+          "part_load_curve": "BOILER-EFFPLR-COND-NECB2011",
+          "notes": "From NECB 2011 and AHRI."
+        },
         {
           "name": "NECB 88% Efficient Condensing Boiler",
           "efficiency": 0.88,
           "part_load_curve": "BOILER-EFFPLR-COND-NECB2011",
           "notes": "From NECB 2011 and AHRI."
         },
+        {
+          "name": "NECB 91% Efficient Condensing Boiler",
+          "efficiency": 0.91,
+          "part_load_curve": "BOILER-EFFPLR-COND-NECB2011",
+          "notes": "From NECB 2011 and AHRI."
+        },
+        {
+          "name": "NECB 94% Efficient Condensing Boiler",
+          "efficiency": 0.94,
+          "part_load_curve": "BOILER-EFFPLR-COND-NECB2011",
+          "notes": "From NECB 2011 and AHRI."
+        },
         {
           "name": "Viessmann Vitocrossal 300 CT3-17 96.2% Efficient Condensing Gas Boiler",
           "efficiency": 0.962,

data/lib/openstudio-standards/standards/necb/ECMS/data/chiller_set.json

@@ -0,0 +1,211 @@
+{
+  "tables": {
+    "chiller_eff_ecm": {
+      "refs": [
+        "assumption"
+      ],
+      "table": [
+        {
+          "name": "NECB_Default",
+          "minimum_capacity": null,
+          "maximum_capacity": null,
+          "notes": "NECB_Default",
+          "capacity_w": null,
+          "cop_w_by_w": null,
+          "ref_leaving_chilled_water_temp_c": null,
+          "ref_entering_condenser_fluid_temp_c": null,
+          "ref_chilled_water_flow_rate_m3_s": null,
+          "ref_condenser_fluid_flow_rate_m3_s": null,
+          "capft_curve": null,
+          "eirft_curve": null,
+          "eirfplr_curve": null,
+          "min_part_load_ratio": null,
+          "max_part_load_ratio": null,
+          "opt_part_load_ratio": null,
+          "min_unloading_ratio": null,
+          "condenser_type": null,
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": null,
+          "leaving_chilled_water_lower_temperature_limit_c": null,
+          "chiller_flow_mode": null,
+          "design_heat_recovery_water_flow_rate_m3_s": null,
+          "description": "Do nothing."
+        },
+        {
+          "name": "VSD",
+          "minimum_capacity": 0.0,
+          "maximum_capacity": 471200.0,
+          "notes": "ElectricEIRChiller McQuay WSC 471kW/5.89COP/Vanes",
+          "capacity_w": 471200.0,
+          "cop_w_by_w": 5.89,
+          "ref_leaving_chilled_water_temp_c": 8.89,
+          "ref_entering_condenser_fluid_temp_c": 26.67,
+          "ref_chilled_water_flow_rate_m3_s": 0.01035,
+          "ref_condenser_fluid_flow_rate_m3_s": 0.01924,
+          "capft_curve": "ElectricEIRChiller McQuay WSC 471kW/5.89COP/Vanes CAPFT",
+          "eirft_curve": "ElectricEIRChiller McQuay WSC 471kW/5.89COP/Vanes EIRFT",
+          "eirfplr_curve": "ElectricEIRChiller McQuay WSC 471kW/5.89COP/Vanes EIRFPLR",
+          "min_part_load_ratio": 0.10,
+          "max_part_load_ratio": 1.15,
+          "opt_part_load_ratio": 1.0,
+          "min_unloading_ratio": 0.10,
+          "condenser_type": "WaterCooled",
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": 1.0,
+          "leaving_chilled_water_lower_temperature_limit_c": 2.0,
+          "chiller_flow_mode": "ConstantFlow",
+          "design_heat_recovery_water_flow_rate_m3_s": 0.0,
+          "description": "Manufacturer:McQuay, CompressorType:Centrifugal, CondenserType:Water (Ref: E+/DataSets/Chillers.idf)"
+        },
+        {
+          "name": "VSD",
+          "minimum_capacity": 471200.0,
+          "maximum_capacity": 742000.0,
+          "notes": "ElectricEIRChiller Carrier 19XR 742kW/5.42COP/VSD",
+          "capacity_w": 742000.0,
+          "cop_w_by_w": 5.42,
+          "ref_leaving_chilled_water_temp_c": 5.56,
+          "ref_entering_condenser_fluid_temp_c": 21.11,
+          "ref_chilled_water_flow_rate_m3_s": 0.01779,
+          "ref_condenser_fluid_flow_rate_m3_s": 0.01956,
+          "capft_curve": "ElectricEIRChiller Carrier 19XR 742kW/5.42COP/VSD CAPFT",
+          "eirft_curve": "ElectricEIRChiller Carrier 19XR 742kW/5.42COP/VSD EIRFT",
+          "eirfplr_curve": "ElectricEIRChiller Carrier 19XR 742kW/5.42COP/VSD EIRFPLR",
+          "min_part_load_ratio": 0.19,
+          "max_part_load_ratio": 1.02,
+          "opt_part_load_ratio": 1.0,
+          "min_unloading_ratio": 0.19,
+          "condenser_type": "WaterCooled",
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": 1.0,
+          "leaving_chilled_water_lower_temperature_limit_c": 2.0,
+          "chiller_flow_mode": "ConstantFlow",
+          "design_heat_recovery_water_flow_rate_m3_s": 0.0,
+          "description": "Manufacturer:Carrier, CompressorType:Centrifugal, CondenserType:Water (Ref: E+/DataSets/Chillers.idf)"
+        },
+        {
+          "name": "VSD",
+          "minimum_capacity": 742000.0,
+          "maximum_capacity": 896700.0,
+          "notes": "ElectricEIRChiller Carrier 19XR 897kW/7.23COP/VSD",
+          "capacity_w": 896700.0,
+          "cop_w_by_w": 7.23,
+          "ref_leaving_chilled_water_temp_c": 9.82,
+          "ref_entering_condenser_fluid_temp_c": 23.89,
+          "ref_chilled_water_flow_rate_m3_s": 0.06782,
+          "ref_condenser_fluid_flow_rate_m3_s": 0.0436,
+          "capft_curve": "ElectricEIRChiller Carrier 19XR 897kW/7.23COP/VSD CAPFT",
+          "eirft_curve": "ElectricEIRChiller Carrier 19XR 897kW/7.23COP/VSD EIRFT",
+          "eirfplr_curve": "ElectricEIRChiller Carrier 19XR 897kW/7.23COP/VSD EIRFPLR",
+          "min_part_load_ratio": 0.20,
+          "max_part_load_ratio": 1.04,
+          "opt_part_load_ratio": 1.0,
+          "min_unloading_ratio": 0.20,
+          "condenser_type": "WaterCooled",
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": 1.0,
+          "leaving_chilled_water_lower_temperature_limit_c": 2.0,
+          "chiller_flow_mode": "ConstantFlow",
+          "design_heat_recovery_water_flow_rate_m3_s": 0.0,
+          "description": "Manufacturer:Carrier, CompressorType:Centrifugal, CondenserType:Water (Ref: E+/DataSets/Chillers.idf)"
+        },
+        {
+          "name": "VSD",
+          "minimum_capacity": 896700.0,
+          "maximum_capacity": 1090100.0,
+          "notes": "ElectricEIRChiller York YT 1090kW/7.57COP/VSD",
+          "capacity_w": 1090100.0,
+          "cop_w_by_w": 7.57,
+          "ref_leaving_chilled_water_temp_c": 6.67,
+          "ref_entering_condenser_fluid_temp_c": 22.78,
+          "ref_chilled_water_flow_rate_m3_s": 0.06782,
+          "ref_condenser_fluid_flow_rate_m3_s": 0.05142,
+          "capft_curve": "ElectricEIRChiller York YT 1090kW/7.57COP/VSD CAPFT",
+          "eirft_curve": "ElectricEIRChiller York YT 1090kW/7.57COP/VSD EIRFT",
+          "eirfplr_curve": "ElectricEIRChiller York YT 1090kW/7.57COP/VSD EIRFPLR",
+          "min_part_load_ratio": 0.14,
+          "max_part_load_ratio": 1.02,
+          "opt_part_load_ratio": 1.0,
+          "min_unloading_ratio": 0.14,
+          "condenser_type": "WaterCooled",
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": 1.0,
+          "leaving_chilled_water_lower_temperature_limit_c": 2.0,
+          "chiller_flow_mode": "ConstantFlow",
+          "design_heat_recovery_water_flow_rate_m3_s": 0.0,
+          "description": "Manufacturer:York, CompressorType:Centrifugal, CondenserType:Water (Ref: E+/DataSets/Chillers.idf)"
+        },
+        {
+          "name": "VSD",
+          "minimum_capacity": 1090100.0,
+          "maximum_capacity": 1350400.0,
+          "notes": "ElectricEIRChiller Carrier 19XR 1350kW/7.90COP/VSD",
+          "capacity_w": 1350400.0,
+          "cop_w_by_w": 7.90,
+          "ref_leaving_chilled_water_temp_c": 5.56,
+          "ref_entering_condenser_fluid_temp_c": 12.78,
+          "ref_chilled_water_flow_rate_m3_s": 0.03684,
+          "ref_condenser_fluid_flow_rate_m3_s": 0.05337,
+          "capft_curve": "ElectricEIRChiller Carrier 19XR 1350kW/7.90COP/VSD CAPFT",
+          "eirft_curve": "ElectricEIRChiller Carrier 19XR 1350kW/7.90COP/VSD EIRFT",
+          "eirfplr_curve": "ElectricEIRChiller Carrier 19XR 1350kW/7.90COP/VSD EIRFPLR",
+          "min_part_load_ratio": 0.19,
+          "max_part_load_ratio": 1.02,
+          "opt_part_load_ratio": 1.0,
+          "min_unloading_ratio": 0.19,
+          "condenser_type": "WaterCooled",
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": 1.0,
+          "leaving_chilled_water_lower_temperature_limit_c": 2.0,
+          "chiller_flow_mode": "ConstantFlow",
+          "design_heat_recovery_water_flow_rate_m3_s": 0.0,
+          "description": "Manufacturer:Carrier, CompressorType:Centrifugal, CondenserType:Water (Ref: E+/DataSets/Chillers.idf)"
+        },
+        {
+          "name": "VSD",
+          "minimum_capacity": 1350400.0,
+          "maximum_capacity": 1723100.0,
+          "notes": "ElectricEIRChiller Carrier 19XR 1723kW/8.32COP/VSD",
+          "capacity_w": 1723100.0,
+          "cop_w_by_w": 8.32,
+          "ref_leaving_chilled_water_temp_c": 6.11,
+          "ref_entering_condenser_fluid_temp_c": 12.78,
+          "ref_chilled_water_flow_rate_m3_s": 0.04757,
+          "ref_condenser_fluid_flow_rate_m3_s": 0.06934,
+          "capft_curve": "ElectricEIRChiller Carrier 19XR 1723kW/8.32COP/VSD CAPFT",
+          "eirft_curve": "ElectricEIRChiller Carrier 19XR 1723kW/8.32COP/VSD EIRFT",
+          "eirfplr_curve": "ElectricEIRChiller Carrier 19XR 1723kW/8.32COP/VSD EIRFPLR",
+          "min_part_load_ratio": 0.18,
+          "max_part_load_ratio": 1.04,
+          "opt_part_load_ratio": 1.0,
+          "min_unloading_ratio": 0.18,
+          "condenser_type": "WaterCooled",
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": 1.0,
+          "leaving_chilled_water_lower_temperature_limit_c": 2.0,
+          "chiller_flow_mode": "ConstantFlow",
+          "design_heat_recovery_water_flow_rate_m3_s": 0.0,
+          "description": "Manufacturer:Carrier, CompressorType:Centrifugal, CondenserType:Water (Ref: E+/DataSets/Chillers.idf)"
+        },
+        {
+          "name": "VSD",
+          "minimum_capacity": 1723100.0,
+          "maximum_capacity": 999999999.0,
+          "notes": "ElectricEIRChiller York YT 2233kW/9.54COP/VSD_2",
+          "capacity_w": 2233000.0,
+          "cop_w_by_w": 9.54,
+          "ref_leaving_chilled_water_temp_c": 5.56,
+          "ref_entering_condenser_fluid_temp_c": 12.78,
+          "ref_chilled_water_flow_rate_m3_s": 0.06107,
+          "ref_condenser_fluid_flow_rate_m3_s": 0.11451,
+          "capft_curve": "ElectricEIRChiller York YT 2233kW/9.54COP/VSD CAPFT_2",
+          "eirft_curve": "ElectricEIRChiller York YT 2233kW/9.54COP/VSD EIRFT_2",
+          "eirfplr_curve": "ElectricEIRChiller York YT 2233kW/9.54COP/VSD EIRFPLR_2",
+          "min_part_load_ratio": 0.10,
+          "max_part_load_ratio": 1.04,
+          "opt_part_load_ratio": 1.0,
+          "min_unloading_ratio": 0.10,
+          "condenser_type": "WaterCooled",
+          "fraction_of_compressor_electric_consumption_rejected_by_condenser": 1.0,
+          "leaving_chilled_water_lower_temperature_limit_c": 2.0,
+          "chiller_flow_mode": "ConstantFlow",
+          "design_heat_recovery_water_flow_rate_m3_s": 0.0,
+          "description": "Manufacturer:York, CompressorType:Centrifugal, CondenserType:Water (Ref: E+/DataSets/Chillers.idf)"
+        }
+      ]
+    }
+  }
+}