logstash-integration-snmp 4.0.0-java

data/lib/mibs/ietf/GMPLS-LSR-STD-MIB.dic

@@ -0,0 +1,693 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python GMPLS-LSR-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/GMPLS-LSR-STD-MIB"
+
+MIB = {
+    "moduleName" : "GMPLS-LSR-STD-MIB",
+
+    "GMPLS-LSR-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Common Control And Measurement Plane (CCAMP) Working Group""",
+        "contact" : 
+            """       Thomas D. Nadeau
+Cisco Systems, Inc.
+Email: tnadeau@cisco.com
+Adrian Farrel
+Old Dog Consulting
+
+
+
+Email: adrian@olddog.co.uk
+Comments about this document should be emailed directly to the
+CCAMP working group mailing list at ccamp@ops.ietf.org.""",
+        "description" :
+            """Copyright (C) The IETF Trust (2007).  This version of
+this MIB module is part of RFC 4803; see the RFC itself for
+full legal notices.
+
+This MIB module contains managed object definitions for the
+Generalized Multiprotocol (GMPLS) Label Switching Router as
+defined in Generalized Multi-Protocol Label Switching (GMPLS)
+Architecture, Mannie et al., RFC 3945, October 2004.""",
+        "revisions" : (
+            {
+                "date" : "2007-02-27 00:00",
+                "description" :
+                    """Initial version issued as part of RFC 4803.""",
+            },
+        ),
+        "identity node" : "gmplsLsrStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "zeroDotZero"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "RowPointer"},
+        {"module" : "GMPLS-TC-STD-MIB", "name" : "GmplsSegmentDirectionTC"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsInterfaceIndex"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsInSegmentIndex"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsOutSegmentIndex"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsInterfaceGroup"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsInSegmentGroup"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsOutSegmentGroup"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsXCGroup"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsPerfGroup"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "mplsLsrNotificationGroup"},
+        {"module" : "IF-MIB", "name" : "ifGeneralInformationGroup"},
+        {"module" : "IF-MIB", "name" : "ifCounterDiscontinuityGroup"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "mplsStdMIB"},
+    ),
+
+    "nodes" : {
+        "gmplsLsrStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15",
+            "status" : "current",
+        }, # node
+        "gmplsLsrObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1",
+        }, # node
+        "gmplsInterfaceTable" : {
+            "nodetype" : "table",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.1",
+            "status" : "current",
+            "description" :
+                """This table specifies per-interface GMPLS capability and
+associated information.  It extends the information in the
+mplsInterfaceTable of MPLS-LSR-STD-MIB through a
+sparse augmentation relationship.""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # table
+        "gmplsInterfaceEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsInterfaceIndex",
+            ],
+            "description" :
+                """A conceptual row in this table is created automatically by an
+LSR for each interface that is both capable of supporting
+GMPLS and configured to support GMPLS.  Note that
+support of GMPLS is not limited to control plane signaling,
+but may include data-plane-only function configured through
+SNMP SET commands performed on this MIB module.
+
+
+
+A conceptual row in this table may also be created via SNMP
+SET commands or automatically by the LSR to supplement a
+conceptual row in the mplsInterfaceTable where the interface
+is not capable of GMPLS but where the other objects carried
+in this row provide useful additional information for an
+MPLS interface.
+
+A conceptual row in this table will exist if and only if a
+corresponding entry in the mplsInterfaceTable exists, and a
+corresponding entry in the ifTable exists with ifType = mpls(166).
+If the associated entry in the ifTable is operationally disabled
+(thus removing the GMPLS capabilities on the interface) or the
+entry in the mplsInterfaceTable is deleted, the corresponding entry
+in this table MUST be deleted shortly thereafter.
+
+The indexes are the same as for the mplsInterfaceTable.  Thus, the
+entry with index 0 represents the per-platform label space and
+contains parameters that apply to all interfaces that
+participate in the per-platform label space.""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # row
+        "gmplsInterfaceSignalingCaps" : {
+            "nodetype" : "column",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "rsvpGmpls" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "crldpGmpls" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "otherGmpls" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "(rsvpGmpls)",
+            "description" :
+                """Defines the signaling capabilities on this interface.  Multiple
+bits may legitimately be set at once, but if 'unknown' is set
+then no other bit may be set.  Setting no bits implies that GMPLS
+signaling cannot be performed on this interface and all LSPs
+must be manually provisioned or that this table entry is only
+present to supplement an entry in the mplsInterfaceTable by
+providing the information carried in other objects in this row.""",
+            "reference" :
+                """1. Generalized MPLS Signaling - CR-LDP Extensions, RFC 3472.
+2. The Multiprotocol Label Switching (MPLS) Working Group
+   decision on MPLS signaling protocols, RFC 3468.
+3. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473.""",
+        }, # column
+        "gmplsInterfaceRsvpHelloPeriod" : {
+            "nodetype" : "column",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "3000",
+            "units" : "milliseconds",
+            "description" :
+                """Period, in milliseconds, between sending Resource Reservation
+Protocol (RSVP) Hello messages on this interface.  A value of 0
+indicates that no Hello messages should be sent on this
+interface.
+
+This object is only valid if gmplsInterfaceSignalingCaps has no
+bits set or includes the rsvpGmpls bit.""",
+            "reference" :
+                """1. RSVP-TE: Extensions to RSVP for LSP Tunnels, RFC 3209,
+section 5.
+2. Generalized MPLS Signaling - RSVP-TE Extensions, RFC 3473,
+section 9.3.""",
+        }, # column
+        "gmplsInSegmentTable" : {
+            "nodetype" : "table",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.2",
+            "status" : "current",
+            "description" :
+                """This table sparse augments the mplsInSegmentTable of
+MPLS-LSR-STD-MIB to provide GMPLS-specific information about
+incoming segments to an LSR.""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # table
+        "gmplsInSegmentEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsInSegmentIndex",
+            ],
+            "description" :
+                """An entry in this table extends the representation of an incoming
+segment represented by an entry in the mplsInSegmentTable in
+
+
+
+MPLS-LSR-STD-MIB through a sparse augmentation.  An entry can be
+created by a network administrator via SNMP SET commands, or in
+response to signaling protocol events.
+
+Note that the storage type for this entry is given by the value
+of mplsInSegmentStorageType in the corresponding entry of the
+mplsInSegmentTable.""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # row
+        "gmplsInSegmentDirection" : {
+            "nodetype" : "column",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"GMPLS-TC-STD-MIB", "name" : "GmplsSegmentDirectionTC"},
+            },
+            "access" : "readwrite",
+            "default" : "forward",
+            "description" :
+                """This object indicates the direction of data flow on this
+segment.  This object cannot be modified if
+mplsInSegmentRowStatus for the corresponding entry in the
+mplsInSegmentTable is active(1).""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # column
+        "gmplsInSegmentExtraParamsPtr" : {
+            "nodetype" : "column",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowPointer"},
+            },
+            "access" : "readwrite",
+            "default" : "0.0",
+            "description" :
+                """Some tunnels will run over transports that can usefully support
+technology-specific additional parameters (for example,
+Synchronous Optical Network (SONET) resource usage).  Such can be
+supplied from an external table and referenced from here.  A value
+of zeroDotZero in this attribute indicates that there is no such
+additional information.""",
+        }, # column
+        "gmplsOutSegmentTable" : {
+            "nodetype" : "table",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.3",
+            "status" : "current",
+            "description" :
+                """This table sparse augments the mplsOutSegmentTable of
+MPLS-LSR-STD-MIB to provide GMPLS-specific information about
+outgoing segments from an LSR.""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # table
+        "gmplsOutSegmentEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsOutSegmentIndex",
+            ],
+            "description" :
+                """An entry in this table extends the representation of an outgoing
+segment represented by an entry in the mplsOutSegmentTable of
+MPLS-LSR-STD-MIB through a sparse augmentation.  An entry can be
+created by a network administrator via SNMP SET commands, or in
+response to signaling protocol events.
+
+Note that the storage type for this entry is given by the value
+of mplsOutSegmentStorageType in the corresponding entry of the
+mplsOutSegmentTable.""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # row
+        "gmplsOutSegmentDirection" : {
+            "nodetype" : "column",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"GMPLS-TC-STD-MIB", "name" : "GmplsSegmentDirectionTC"},
+            },
+            "access" : "readwrite",
+            "default" : "forward",
+            "description" :
+                """This object indicates the direction of data flow on this
+segment.  This object cannot be modified if
+mplsOutSegmentRowStatus for the corresponding entry in the
+mplsOutSegmentTable is active(1).""",
+            "reference" :
+                """1. Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information Base (MIB), RFC 3813.""",
+        }, # column
+        "gmplsOutSegmentTTLDecrement" : {
+            "nodetype" : "column",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """This object indicates the amount by which to decrement the Time
+to Live (TTL) of any payload packets forwarded on this segment if
+per-hop decrementing is being done.
+
+A value of zero indicates that no decrement should be made or
+that per-hop decrementing is not in use.
+
+See the gmplsTunnelTTLDecrement object in the gmplsTunnelTable
+of GMPLS-TE-STD-MIB for a value by which to decrement the TTL
+for the whole of a tunnel.
+
+This object cannot be modified if mplsOutSegmentRowStatus for
+the associated entry in the mplsOutSegmentTable is active(1).""",
+            "reference" :
+                """1. Time To Live (TTL) Processing in Multi-Protocol Label
+Switching (MPLS) Networks, RFC 3443.
+2. Generalized Multiprotocol Label Switching (GMPLS) Traffic
+Engineering Management Information Base, RFC 4802.""",
+        }, # column
+        "gmplsOutSegmentExtraParamsPtr" : {
+            "nodetype" : "column",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowPointer"},
+            },
+            "access" : "readwrite",
+            "default" : "0.0",
+            "description" :
+                """Some tunnels will run over transports that can usefully support
+technology-specific additional parameters (for example, SONET
+resource usage).  Such can be supplied from an external table and
+referenced from here.
+
+A value of zeroDotZero in this attribute indicates that there is
+no such additional information.""",
+        }, # column
+        "gmplsLsrConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2",
+        }, # node
+        "gmplsLsrGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2.1",
+        }, # node
+        "gmplsLsrCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "gmplsInterfaceGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2.1.1",
+            "status" : "current",
+            "members" : {
+                "gmplsInterfaceSignalingCaps" : {
+                    "nodetype" : "member",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsInterfaceRsvpHelloPeriod" : {
+                    "nodetype" : "member",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects that provide additional
+information for an MPLS interface and are needed
+for GMPLS interface configuration and performance
+information.""",
+        }, # group
+        "gmplsInSegmentGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2.1.2",
+            "status" : "current",
+            "members" : {
+                "gmplsInSegmentDirection" : {
+                    "nodetype" : "member",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsInSegmentExtraParamsPtr" : {
+                    "nodetype" : "member",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects that provide additional
+information for an MPLS in-segment and are needed
+for GMPLS in-segment configuration and performance
+information.""",
+        }, # group
+        "gmplsOutSegmentGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2.1.3",
+            "status" : "current",
+            "members" : {
+                "gmplsOutSegmentDirection" : {
+                    "nodetype" : "member",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsOutSegmentTTLDecrement" : {
+                    "nodetype" : "member",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsOutSegmentExtraParamsPtr" : {
+                    "nodetype" : "member",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects that provide additional
+information for an MPLS out-segment and are needed
+for GMPLS out-segment configuration and performance
+information.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "gmplsLsrModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2.2.1",
+            "status" : "current",
+            "description" :
+                """Compliance statement for agents that provide full support for
+GMPLS-LSR-STD-MIB.
+
+The mandatory group has to be implemented by all LSRs that
+originate, terminate, or act as transit for TE-LSPs/tunnels.
+In addition, depending on the type of tunnels supported, other
+groups become mandatory as explained below.""",
+            "requires" : {
+                "ifGeneralInformationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "ifCounterDiscontinuityGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "mplsInterfaceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsInSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsOutSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsXCGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsLsrNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "gmplsInterfaceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsInSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsOutSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "gmplsInSegmentDirection" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "GMPLS-TC-STD-MIB",
+                                "type" : "GmplsSegmentDirectionTC",
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """The only valid value for unidirectional LSPs is forward(1).""",
+                },
+                "gmplsOutSegmentDirection" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "GMPLS-TC-STD-MIB",
+                                "type" : "GmplsSegmentDirectionTC",
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """The only valid value for unidirectional LSPs is forward(1).""",
+                },
+                "gmplsOutSegmentTTLDecrement" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "gmplsInSegmentExtraParamsPtr" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "gmplsOutSegmentExtraParamsPtr" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "gmplsLsrModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "GMPLS-LSR-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.15.2.2.2",
+            "status" : "current",
+            "description" :
+                """Compliance requirement for implementations that only provide
+read-only support for GMPLS-LSR-STD-MIB.  Such devices can then
+be monitored but cannot be configured using this MIB module.""",
+            "requires" : {
+                "ifGeneralInformationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "ifCounterDiscontinuityGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "mplsInterfaceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsInSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsOutSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsXCGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "mplsPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LSR-STD-MIB"
+                },
+                "gmplsInterfaceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsInSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+                "gmplsOutSegmentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "GMPLS-LSR-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "gmplsInterfaceSignalingCaps" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "gmplsInterfaceRsvpHelloPeriod" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "gmplsInSegmentDirection" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "GMPLS-TC-STD-MIB",
+                                "type" : "GmplsSegmentDirectionTC",
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """The only valid value for unidirectional LSPs is forward(1).""",
+                },
+                "gmplsInSegmentExtraParamsPtr" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "gmplsOutSegmentDirection" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """The only valid value for unidirectional LSPs is forward(1).""",
+                },
+                "gmplsOutSegmentTTLDecrement" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "gmplsOutSegmentExtraParamsPtr" : {
+                    "module" : "GMPLS-LSR-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}