logstash-integration-snmp 4.0.0-java

data/lib/mibs/ietf/MPLS-TC-STD-MIB.dic

@@ -0,0 +1,911 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python MPLS-TC-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/MPLS-TC-STD-MIB"
+
+MIB = {
+    "moduleName" : "MPLS-TC-STD-MIB",
+
+    "MPLS-TC-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Multiprotocol Label Switching (MPLS) Working
+Group.""",
+        "contact" : 
+            """        Thomas D. Nadeau
+
+
+
+Cisco Systems, Inc.
+tnadeau@cisco.com
+
+Joan Cucchiara
+Marconi Communications, Inc.
+jcucchiara@mindspring.com
+
+Cheenu Srinivasan
+Bloomberg L.P.
+cheenu@bloomberg.net
+
+Arun Viswanathan
+Force10 Networks, Inc.
+arunv@force10networks.com
+
+Hans Sjostrand
+ipUnplugged
+hans@ipunplugged.com
+
+Kireeti Kompella
+Juniper Networks
+kireeti@juniper.net
+
+Email comments to the MPLS WG Mailing List at
+mpls@uu.net.""",
+        "description" :
+            """Copyright (C) The Internet Society (2004). The
+initial version of this MIB module was published
+in RFC 3811. For full legal notices see the RFC
+itself or see:
+http://www.ietf.org/copyrights/ianamib.html
+
+This MIB module defines TEXTUAL-CONVENTIONs
+for concepts used in Multiprotocol Label
+Switching (MPLS) networks.""",
+        "revisions" : (
+            {
+                "date" : "2004-06-03 00:00",
+                "description" :
+                    """Initial version published as part of RFC 3811.""",
+            },
+        ),
+        "identity node" : "mplsTCStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+    ),
+
+    "typedefs" : {
+        "MplsAtmVcIdentifier" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "32",
+                "max" : "65535"
+            },
+            ],
+            "range" : {
+                "min" : "32",
+                "max" : "65535"
+            },
+            "format" : "d",
+            "description" :
+                """A Label Switching Router (LSR) that
+creates LDP sessions on ATM interfaces
+uses the VCI or VPI/VCI field to hold the
+LDP Label.
+
+VCI values MUST NOT be in the 0-31 range.
+The values 0 to 31 are reserved for other uses
+by the ITU and ATM Forum.  The value
+of 32 can only be used for the Control VC,
+although values greater than 32 could be
+configured for the Control VC.
+
+If a value from 0 to 31 is used for a VCI
+the management entity controlling the LDP
+subsystem should reject this with an
+inconsistentValue error.  Also, if
+the value of 32 is used for a VC which is
+NOT the Control VC, this should
+result in an inconsistentValue error.""",
+            "reference" :
+                """MPLS using LDP and ATM VC Switching, RFC3035.""",
+        },
+        "MplsBitRate" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "format" : "d",
+            "description" :
+                """If the value of this object is greater than zero,
+then this represents the bandwidth of this MPLS
+interface (or Label Switched Path) in units of
+'1,000 bits per second'.
+
+The value, when greater than zero, represents the
+bandwidth of this MPLS interface (rounded to the
+nearest 1,000) in units of 1,000 bits per second.
+If the bandwidth of the MPLS interface is between
+((n * 1000) - 500) and ((n * 1000) + 499), the value
+of this object is n, such that n > 0.
+
+If the value of this object is 0 (zero), this
+means that the traffic over this MPLS interface is
+considered to be best effort.""",
+        },
+        "MplsBurstSize" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "format" : "d",
+            "description" :
+                """The number of octets of MPLS data that the stream
+may send back-to-back without concern for policing.
+The value of zero indicates that an implementation
+does not support Burst Size.""",
+        },
+        "MplsExtendedTunnelId" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "description" :
+                """A unique identifier for an MPLS Tunnel.  This may
+represent an IPv4 address of the ingress or egress
+LSR for the tunnel.  This value is derived from the
+Extended Tunnel Id in RSVP or the Ingress Router ID
+for CR-LDP.""",
+            "reference" :
+                """RSVP-TE: Extensions to RSVP for LSP Tunnels,
+[RFC3209].
+
+Constraint-Based LSP Setup using LDP, [RFC3212].""",
+        },
+        "MplsLabel" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "description" :
+                """This value represents an MPLS label as defined in
+[RFC3031],  [RFC3032], [RFC3034], [RFC3035] and
+[RFC3471].
+
+The label contents are specific to the label being
+represented, such as:
+
+* The label carried in an MPLS shim header
+  (for LDP this is the Generic Label) is a 20-bit
+  number represented by 4 octets.  Bits 0-19 contain
+  a label or a reserved label value.  Bits 20-31
+  MUST be zero.
+
+  The following is quoted directly from [RFC3032].
+  There are several reserved label values:
+
+     i. A value of 0 represents the
+        'IPv4 Explicit NULL Label'.  This label
+        value is only legal at the bottom of the
+        label stack.  It indicates that the label
+        stack must be popped, and the forwarding
+        of the packet must then be based on the
+
+
+
+        IPv4 header.
+
+    ii. A value of 1 represents the
+        'Router Alert Label'.  This label value is
+        legal anywhere in the label stack except at
+        the bottom.  When a received packet
+        contains this label value at the top of
+        the label stack, it is delivered to a
+        local software module for processing.
+        The actual forwarding of the packet
+        is determined by the label beneath it
+        in the stack.  However, if the packet is
+        forwarded further, the Router Alert Label
+        should be pushed back onto the label stack
+        before forwarding.  The use of this label
+        is analogous to the use of the
+        'Router Alert Option' in IP packets
+        [RFC2113].  Since this label
+        cannot occur at the bottom of the stack,
+        it is not associated with a
+        particular network layer protocol.
+
+   iii. A value of 2 represents the
+        'IPv6 Explicit NULL Label'.  This label
+        value is only legal at the bottom of the
+        label stack.  It indicates that the label
+        stack must be popped, and the forwarding
+        of the packet must then be based on the
+        IPv6 header.
+
+    iv. A value of 3 represents the
+        'Implicit NULL Label'.
+        This is a label that an LSR may assign and
+        distribute, but which never actually
+        appears in the encapsulation.  When an
+        LSR would otherwise replace the label
+        at the top of the stack with a new label,
+        but the new label is 'Implicit NULL',
+        the LSR will pop the stack instead of
+        doing the replacement.  Although
+        this value may never appear in the
+        encapsulation, it needs to be specified in
+        the Label Distribution Protocol, so a value
+        is reserved.
+
+     v. Values 4-15 are reserved.
+
+* The frame relay label can be either 10-bits or
+
+
+
+  23-bits depending on the DLCI field size and the
+  upper 22-bits or upper 9-bits must be zero,
+  respectively.
+
+* For an ATM label the lower 16-bits represents the
+  VCI, the next 12-bits represents the VPI and the
+  remaining bits MUST be zero.
+
+* The Generalized-MPLS (GMPLS) label contains a
+  value greater than 2^24-1 and used in GMPLS
+  as defined in [RFC3471].""",
+            "reference" :
+                """Multiprotocol Label Switching Architecture,
+RFC3031.
+
+MPLS Label Stack Encoding, [RFC3032].
+
+Use of Label Switching on Frame Relay Networks,
+RFC3034.
+
+MPLS using LDP and ATM VC Switching, RFC3035.
+Generalized Multiprotocol Label Switching
+(GMPLS) Architecture, [RFC3471].""",
+        },
+        "MplsLabelDistributionMethod" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "downstreamOnDemand" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "downstreamUnsolicited" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """The label distribution method which is also called
+the label advertisement mode [RFC3036].
+Each interface on an LSR is configured to operate
+in either Downstream Unsolicited or Downstream
+on Demand.""",
+            "reference" :
+                """Multiprotocol Label Switching Architecture,
+RFC3031.
+
+LDP Specification, RFC3036, Section 2.6.3.""",
+        },
+        "MplsLdpIdentifier" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "6",
+                "max" : "6"
+            },
+            ],
+            "range" : {
+                "min" : "6",
+                "max" : "6"
+            },
+            "format" : "1d.1d.1d.1d:2d",
+            "description" :
+                """The LDP identifier is a six octet
+
+
+
+quantity which is used to identify a
+Label Switching Router (LSR) label space.
+
+The first four octets identify the LSR and
+must be a globally unique value, such as a
+32-bit router ID assigned to the LSR, and the
+last two octets identify a specific label
+space within the LSR.""",
+        },
+        "MplsLsrIdentifier" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "4",
+                "max" : "4"
+            },
+            ],
+            "range" : {
+                "min" : "4",
+                "max" : "4"
+            },
+            "description" :
+                """The Label Switching Router (LSR) identifier is the
+first 4 bytes of the Label Distribution Protocol
+(LDP) identifier.""",
+        },
+        "MplsLdpLabelType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "generic" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "atm" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "frameRelay" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """The Layer 2 label types which are defined for MPLS
+LDP and/or CR-LDP are generic(1), atm(2), or
+frameRelay(3).""",
+        },
+        "MplsLSPID" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "2",
+                "max" : "2"
+            },
+            {
+                "min" : "6",
+                "max" : "6"
+            },
+            ],
+            "range" : {
+                "min" : "2",
+                "max" : "6"
+            },
+            "description" :
+                """A unique identifier within an MPLS network that is
+assigned to each LSP.  This is assigned at the head
+end of the LSP and can be used by all LSRs
+to identify this LSP.  This value is piggybacked by
+the signaling protocol when this LSP is signaled
+within the network.  This identifier can then be
+used at each LSR to identify which labels are
+being swapped to other labels for this LSP.  This
+object  can also be used to disambiguate LSPs that
+share the same RSVP sessions between the same
+source and destination.
+
+For LSPs established using CR-LDP, the LSPID is
+composed of the ingress LSR Router ID (or any of
+its own IPv4 addresses) and a locally unique
+CR-LSP ID to that LSR.  The first two bytes carry
+
+
+
+the CR-LSPID, and the remaining 4 bytes carry
+the Router ID.  The LSPID is useful in network
+management, in CR-LSP repair, and in using
+an already established CR-LSP as a hop in
+an ER-TLV.
+
+For LSPs signaled using RSVP-TE, the LSP ID is
+defined as a 16-bit (2 byte) identifier used
+in the SENDER_TEMPLATE and the FILTER_SPEC
+that can be changed to allow a sender to
+share resources with itself.  The length of this
+object should only be 2 or 6 bytes.  If the length
+of this octet string is 2 bytes, then it must
+identify an RSVP-TE LSPID, or it is 6 bytes,
+it must contain a CR-LDP LSPID.""",
+            "reference" :
+                """RSVP-TE:  Extensions to RSVP for LSP Tunnels,
+[RFC3209].
+
+Constraint-Based LSP Setup using LDP,
+[RFC3212].""",
+        },
+        "MplsLspType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "unknown" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "terminatingLsp" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "originatingLsp" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "crossConnectingLsp" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "description" :
+                """Types of Label Switch Paths (LSPs)
+on a Label Switching Router (LSR) or a
+Label Edge Router (LER) are:
+
+   unknown(1)         -- if the LSP is not known
+                         to be one of the following.
+
+   terminatingLsp(2)  -- if the LSP terminates
+                         on the LSR/LER, then this
+                         is an egressing LSP
+                         which ends on the LSR/LER,
+
+   originatingLsp(3)  -- if the LSP originates
+                         from this LSR/LER, then
+                         this is an ingressing LSP
+                         which is the head-end of
+                         the LSP,
+
+crossConnectingLsp(4) -- if the LSP ingresses
+                         and egresses on the LSR,
+                         then it is
+                         cross-connecting on that
+
+
+
+                         LSR.""",
+        },
+        "MplsOwner" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "unknown" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "other" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "snmp" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "ldp" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "crldp" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "rsvpTe" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "policyAgent" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "description" :
+                """This object indicates the local network
+management subsystem that originally created
+the object(s) in question.  The values of
+this enumeration are defined as follows:
+
+unknown(1) - the local network management
+subsystem cannot discern which
+component created the object.
+
+other(2) - the local network management
+subsystem is able to discern which component
+created the object, but the component is not
+listed within the following choices,
+e.g., command line interface (cli).
+
+snmp(3) - The Simple Network Management Protocol
+was used to configure this object initially.
+
+ldp(4) - The Label Distribution Protocol was
+used to configure this object initially.
+
+crldp(5) - The Constraint-Based Label Distribution
+Protocol was used to configure this object
+initially.
+
+rsvpTe(6) - The Resource Reservation Protocol was
+used to configure this object initially.
+
+policyAgent(7) - A policy agent (perhaps in
+combination with one of the above protocols) was
+used to configure this object initially.
+
+An object created by any of the above choices
+MAY be modified or destroyed by the same or a
+different choice.""",
+        },
+        "MplsPathIndexOrZero" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "description" :
+                """A unique identifier used to identify a specific
+path used by a tunnel.  A value of 0 (zero) means
+that no path is in use.""",
+        },
+        "MplsPathIndex" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            "description" :
+                """A unique value to index (by Path number) an
+entry in a table.""",
+        },
+        "MplsRetentionMode" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "conservative" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "liberal" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """The label retention mode which specifies whether
+an LSR maintains a label binding for a FEC
+learned from a neighbor that is not its next hop
+for the FEC.
+
+If the value is conservative(1) then advertised
+label mappings are retained only if they will be
+used to forward packets, i.e., if label came from
+a valid next hop.
+
+If the value is liberal(2) then all advertised
+label mappings are retained whether they are from
+a valid next hop or not.""",
+            "reference" :
+                """Multiprotocol Label Switching Architecture,
+RFC3031.
+
+LDP Specification, RFC3036, Section 2.6.2.""",
+        },
+        "MplsTunnelAffinity" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "description" :
+                """Describes the configured 32-bit Include-any,
+include-all, or exclude-all constraint for
+constraint-based link selection.""",
+            "reference" :
+                """RSVP-TE:  Extensions to RSVP for LSP Tunnels,
+RFC3209, Section 4.7.4.""",
+        },
+        "MplsTunnelIndex" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "65535"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "65535"
+            },
+            "description" :
+                """A unique index into mplsTunnelTable.
+For tunnels signaled using RSVP, this value
+should correspond to the RSVP Tunnel ID
+used for the RSVP-TE session.""",
+        },
+        "MplsTunnelInstanceIndex" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "description" :
+                """The tunnel entry with instance index 0
+should refer to the configured tunnel
+interface (if one exists).
+
+Values greater than 0, but less than or
+equal to 65535, should be used to indicate
+signaled (or backup) tunnel LSP instances.
+For tunnel LSPs signaled using RSVP,
+this value should correspond to the
+RSVP LSP ID used for the RSVP-TE
+LSP.
+
+Values greater than 65535 apply to FRR
+detour instances.""",
+        },
+        "TeHopAddressType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "unknown" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "ipv4" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "ipv6" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "asnumber" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "unnum" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "lspid" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "description" :
+                """A value that represents a type of address for a
+Traffic Engineered (TE) Tunnel hop.
+
+unknown(0)   An unknown address type.  This value
+             MUST be used if the value of the
+             corresponding TeHopAddress object is a
+
+
+
+             zero-length string.  It may also be
+             used to indicate a TeHopAddress which
+             is not in one of the formats defined
+             below.
+
+ipv4(1)      An IPv4 network address as defined by
+             the InetAddressIPv4 TEXTUAL-CONVENTION
+             [RFC3291].
+
+ipv6(2)      A global IPv6 address as defined by
+             the InetAddressIPv6 TEXTUAL-CONVENTION
+             [RFC3291].
+
+asnumber(3)  An Autonomous System (AS) number as
+             defined by the TeHopAddressAS
+             TEXTUAL-CONVENTION.
+
+unnum(4)     An unnumbered interface index as
+             defined by the TeHopAddressUnnum
+             TEXTUAL-CONVENTION.
+
+lspid(5)     An LSP ID for TE Tunnels
+             (RFC3212) as defined by the
+             MplsLSPID TEXTUAL-CONVENTION.
+
+Each definition of a concrete TeHopAddressType
+value must be accompanied by a definition
+of a TEXTUAL-CONVENTION for use with that
+TeHopAddress.
+
+To support future extensions, the TeHopAddressType
+TEXTUAL-CONVENTION SHOULD NOT be sub-typed in
+object type definitions.  It MAY be sub-typed in
+compliance statements in order to require only a
+subset of these address types for a compliant
+implementation.
+
+Implementations must ensure that TeHopAddressType
+objects and any dependent objects
+(e.g., TeHopAddress objects) are consistent.
+An inconsistentValue error must be generated
+if an attempt to change a TeHopAddressType
+object would, for example, lead to an
+undefined TeHopAddress value that is
+not defined herein.  In particular,
+TeHopAddressType/TeHopAddress pairs
+must be changed together if the address
+type changes (e.g., from ipv6(2) to ipv4(1)).""",
+            "reference" :
+                """TEXTUAL-CONVENTIONs for Internet Network
+Addresses, RFC3291.
+
+Constraint-Based LSP Setup using LDP,
+[RFC3212]""",
+        },
+        "TeHopAddress" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "32"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "32"
+            },
+            "description" :
+                """Denotes a generic Tunnel hop address,
+that is, the address of a node which
+an LSP traverses, including the source
+and destination nodes.  An address may be
+very concrete, for example, an IPv4 host
+address (i.e., with prefix length 32);
+if this IPv4 address is an interface
+address, then that particular interface
+must be traversed.  An address may also
+specify an 'abstract node', for example,
+an IPv4 address with prefix length
+less than 32, in which case, the LSP
+can traverse any node whose address
+falls in that range.  An address may
+also specify an Autonomous System (AS),
+in which  case the LSP can traverse any
+node that falls within that AS.
+
+A TeHopAddress value is always interpreted within
+the context of an TeHopAddressType value.  Every
+usage of the TeHopAddress TEXTUAL-CONVENTION
+is required to specify the TeHopAddressType object
+which provides the context.  It is suggested that
+the TeHopAddressType object is logically registered
+before the object(s) which use the TeHopAddress
+TEXTUAL-CONVENTION if they appear in the
+same logical row.
+
+The value of a TeHopAddress object must always be
+
+
+
+consistent with the value of the associated
+TeHopAddressType object.  Attempts to set a
+TeHopAddress object to a value which is
+inconsistent with the associated TeHopAddressType
+must fail with an inconsistentValue error.""",
+        },
+        "TeHopAddressAS" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "4",
+                "max" : "4"
+            },
+            ],
+            "range" : {
+                "min" : "4",
+                "max" : "4"
+            },
+            "description" :
+                """Represents a two or four octet AS number.
+The AS number is represented in network byte
+order (MSB first).  A two-octet AS number has
+the two MSB octets set to zero.""",
+            "reference" :
+                """Textual Conventions for Internet Network
+Addresses, [RFC3291].  The
+InetAutonomousSystemsNumber TEXTUAL-CONVENTION
+has a SYNTAX of Unsigned32, whereas this TC
+has a SYNTAX of OCTET STRING (SIZE (4)).
+Both TCs represent an autonomous system number
+but use different syntaxes to do so.""",
+        },
+        "TeHopAddressUnnum" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "4",
+                "max" : "4"
+            },
+            ],
+            "range" : {
+                "min" : "4",
+                "max" : "4"
+            },
+            "description" :
+                """Represents an unnumbered interface:
+
+octets   contents               encoding
+ 1-4     unnumbered interface   network-byte order
+
+The corresponding TeHopAddressType value is
+unnum(5).""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "mplsStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-TC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166",
+        }, # node
+        "mplsTCStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-TC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.1",
+            "status" : "current",
+        }, # node
+    }, # nodes
+
+}