logstash-integration-snmp 4.0.0-java

data/lib/mibs/ietf/EFM-CU-MIB.dic

@@ -0,0 +1,4335 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python EFM-CU-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/EFM-CU-MIB"
+
+MIB = {
+    "moduleName" : "EFM-CU-MIB",
+
+    "EFM-CU-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Ethernet Interfaces and Hub MIB Working Group""",
+        "contact" : 
+            """WG charter:
+http://www.ietf.org/html.charters/OLD/hubmib-charter.html
+
+
+
+Mailing Lists:
+General Discussion: hubmib@ietf.org
+To Subscribe: hubmib-request@ietf.org
+In Body: subscribe your_email_address
+
+Chair:  Bert Wijnen
+Postal: Alcatel-Lucent
+      Schagen 33
+      3461 GL Linschoten
+      Netherlands
+Phone: +31-348-407-775
+EMail: bwijnen@alcatel-lucent.com
+
+Editor: Edward Beili
+Postal: Actelis Networks Inc.
+      25 Bazel St., P.O.B. 10173
+      Petach-Tikva 10173
+      Israel
+Phone: +972-3-924-3491
+Email: edward.beili@actelis.com""",
+        "description" :
+            """The objects in this MIB module are used to manage
+the Ethernet in the First Mile (EFM) Copper (EFMCu) Interfaces
+2BASE-TL and 10PASS-TS, defined in IEEE Std. 802.3ah-2004,
+which is now a part of IEEE Std. 802.3-2005.
+
+The following references are used throughout this MIB module:
+
+[802.3ah] refers to:
+  IEEE Std 802.3ah-2004: 'IEEE Standard for Information
+  technology - Telecommunications and information exchange
+  between systems - Local and metropolitan area networks -
+  Specific requirements -
+  Part 3: Carrier Sense Multiple Access with Collision
+  Detection (CSMA/CD) Access Method and Physical Layer
+  Specifications -
+  Amendment: Media Access Control Parameters, Physical
+  Layers and Management Parameters for Subscriber Access
+  Networks', 07 September 2004.
+
+Of particular interest are Clause 61, 'Physical Coding
+Sublayer (PCS) and common specifications, type 10PASS-TS and
+type 2BASE-TL', Clause 30, 'Management', Clause 45,
+'Management Data Input/Output (MDIO) Interface', Annex 62A,
+'PMD profiles for 10PASS-TS' and Annex 63A, 'PMD profiles for
+2BASE-TL'.
+
+
+
+
+[G.991.2] refers to:
+  ITU-T Recommendation G.991.2: 'Single-pair High-speed Digital
+  Subscriber Line (SHDSL) transceivers', December 2003.
+
+[ANFP] refers to:
+  NICC Document ND1602:2005/08: 'Specification of the Access
+  Network Frequency Plan (ANFP) applicable to transmission
+  systems used on the BT Access Network,' August 2005.
+
+The following normative documents are quoted by the DESCRIPTION
+clauses in this MIB module:
+
+[G.993.1] refers to:
+  ITU-T Recommendation G.993.1: 'Very High speed Digital
+  Subscriber Line transceivers', June 2004.
+
+[T1.424] refers to:
+  ANSI T1.424-2004: 'Interface Between Networks and Customer
+  Installation Very-high-bit-rate Digital Subscriber Lines
+  (VDSL) Metallic Interface (DMT Based)', June 2004.
+
+[TS 101 270-1] refers to:
+  ETSI TS 101 270-1: 'Transmission and Multiplexing (TM);
+  Access transmission systems on metallic access cables;
+  Very high speed Digital Subscriber Line (VDSL); Part 1:
+  Functional requirements', October 2005.
+
+Naming Conventions:
+  Atn   - Attenuation
+  CO    - Central Office
+  CPE   - Customer Premises Equipment
+  EFM   - Ethernet in the First Mile
+  EFMCu - EFM Copper
+  MDIO  - Management Data Input/Output
+  Mgn   - Margin
+  PAF   - PME Aggregation Function
+  PBO   - Power Back-Off
+  PCS   - Physical Coding Sublayer
+  PMD   - Physical Medium Dependent
+  PME   - Physical Medium Entity
+  PSD   - Power Spectral Density
+  SNR   - Signal to Noise Ratio
+  TCPAM - Trellis Coded Pulse Amplitude Modulation
+
+Copyright (C) The IETF Trust (2007).  This version
+of this MIB module is part of RFC 5066;  see the RFC
+itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2007-11-14 00:00",
+                "description" :
+                    """Initial version, published as RFC 5066.""",
+            },
+        ),
+        "identity node" : "efmCuMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "PhysAddress"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "IF-MIB", "name" : "ifSpeed"},
+    ),
+
+    "typedefs" : {
+        "EfmProfileIndex" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "255"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "255"
+            },
+            "format" : "d",
+            "description" :
+                """A unique value, greater than zero, for each PME configuration
+profile in the managed EFMCu port.  It is RECOMMENDED that
+values are assigned contiguously starting from 1.  The value
+for each profile MUST remain constant at least from one
+re-initialization of the entity's network management system
+to the next re-initialization.""",
+        },
+        "EfmProfileIndexOrZero" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "255"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "255"
+            },
+            "format" : "d",
+            "description" :
+                """This textual convention is an extension of the
+EfmProfileIndex convention.  The latter defines a greater than
+zero value used to identify a PME profile in the managed EFMCu
+port.  This extension permits the additional value of zero.
+The value of zero is object-specific and MUST therefore be
+defined as part of the description of any object that uses
+this syntax.
+Examples of the usage of zero value might include situations
+where the current operational profile is unknown.""",
+        },
+        "EfmProfileIndexList" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "6"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "6"
+            },
+            "format" : "1d:",
+            "description" :
+                """This textual convention represents a list of up to 6
+EfmProfileIndex values, any of which can be chosen for
+configuration of a PME in a managed EFMCu port.
+The EfmProfileIndex textual convention defines a greater than
+zero value used to identify a PME profile.
+The value of this object is a concatenation of zero or
+more (up to 6) octets, where each octet contains an 8-bit
+EfmProfileIndex value.
+A zero-length octet string is object-specific and MUST
+therefore be defined as part of the description of any object
+that uses this syntax.  Examples of the usage of a zero-length
+value might include situations where an object using this
+textual convention is irrelevant for a specific EFMCu port
+type.""",
+        },
+        "EfmTruthValueOrUnknown" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "unknown" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "true" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "false" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """This textual convention is an extension of the TruthValue
+convention.  The latter defines a boolean value with possible
+values of true(1) and false(2).  This extension permits the
+additional value of unknown(0), which can be returned as the
+result of a GET operation when an exact true or false value
+of the object cannot be determined.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "efmCuMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167",
+            "status" : "current",
+        }, # node
+        "efmCuObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1",
+        }, # node
+        "efmCuPort" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1",
+        }, # node
+        "efmCuPortNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.0",
+        }, # node
+        "efmCuPortConfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1",
+            "status" : "current",
+            "description" :
+                """Table for Configuration of EFMCu 2BASE-TL/10PASS-TS (PCS)
+Ports.  Entries in this table MUST be maintained in a
+persistent manner.""",
+        }, # table
+        "efmCuPortConfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the EFMCu Port Configuration table.
+Each entry represents an EFMCu port indexed by the ifIndex.
+Note that an EFMCu PCS port runs on top of a single
+or multiple PME port(s), which are also indexed by ifIndex.""",
+        }, # row
+        "efmCuPAFAdminState" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Administrative (desired) state of the PAF of the EFMCu port
+(PCS).
+When 'disabled', PME aggregation will not be performed by the
+PCS.  No more than a single PME can be assigned to this PCS in
+this case.
+When 'enabled', PAF will be performed by the PCS when the link
+is Up, even on a single attached PME, if PAF is supported.
+
+PCS ports incapable of supporting PAF SHALL return a value of
+'disabled'.  Attempts to 'enable' such ports SHALL be
+rejected.
+
+A PAF 'enabled' port with multiple PMEs assigned cannot be
+'disabled'.  Attempts to 'disable' such port SHALL be
+rejected, until at most one PME is left assigned.
+
+Changing PAFAdminState is a traffic-disruptive operation and
+as such SHALL be done when the link is Down.  Attempts to
+change this object SHALL be rejected if the link is Up or
+Initializing.
+
+This object maps to the Clause 30 attribute aPAFAdminState.
+
+If a Clause 45 MDIO Interface to the PCS is present, then this
+object maps to the PAF enable bit in the 10P/2B PCS control
+register.
+
+This object MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] 61.2.2, 45.2.3.18.3""",
+        }, # column
+        "efmCuPAFDiscoveryCode" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "PhysAddress",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "6",
+                        "max" : "6"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """PAF Discovery Code of the EFMCu port (PCS).
+A unique 6-octet code used by the Discovery function,
+when PAF is supported.
+PCS ports incapable of supporting PAF SHALL return a
+zero-length octet string on an attempt to read this object.
+An attempt to write to this object SHALL be rejected for such
+ports.
+This object MUST be instantiated for the -O subtype PCS before
+writing operations on the efmCuPAFRemoteDiscoveryCode
+(Set_if_Clear and Clear_if_Same) are performed by PMEs
+associated with the PCS.
+The initial value of this object for -R subtype ports after
+reset is all zeroes.  For -R subtype ports, the value of this
+object cannot be changed directly.  This value may be changed
+as a result of writing operation on the
+efmCuPAFRemoteDiscoveryCode object of remote PME of -O
+subtype, connected to one of the local PMEs associated with
+the PCS.
+
+Discovery MUST be performed when the link is Down.
+Attempts to change this object MUST be rejected (in case of
+SNMP with the error inconsistentValue), if the link is Up or
+Initializing.
+
+The PAF Discovery Code maps to the local Discovery code
+variable in PAF (note that it does not have a corresponding
+Clause 45 register).""",
+            "reference" :
+                """[802.3ah] 61.2.2.8.3, 61.2.2.8.4, 45.2.6.6.1, 45.2.6.8,
+61A.2""",
+        }, # column
+        "efmCuAdminProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndexList"},
+            },
+            "access" : "readwrite",
+            "default" : "0x01",
+            "description" :
+                """Desired configuration profile(s), common for all PMEs in the
+EFMCu port.  This object is a list of pointers to entries in
+either efmCuPme2BProfileTable or
+efmCuPme10PProfileTable, depending on the current
+operating SubType of the EFMCu port as indicated by
+efmCuPortSide.
+
+
+
+The value of this object is a list of up to 6 indices of
+profiles.  If this list consists of a single profile index,
+then all PMEs assigned to this EFMCu port SHALL be configured
+according to the profile referenced by that index, unless it
+is overwritten by a corresponding non-zero
+efmCuPmeAdminProfile instance, which takes precedence over
+efmCuAdminProfile.
+A list consisting of more than one index allows each PME
+in the port to be configured according to any profile
+specified in the list.
+By default, this object has a value of 0x01, referencing the
+1st entry in efmCuPme2BProfileTable or
+efmCuPme10PProfileTable.
+
+This object is writable and readable for the -O subtype
+(2BaseTL-O or 10PassTS-O) EFMCu ports.  It is irrelevant for
+the -R  subtype (2BaseTL-R or 10PassTS-R) ports -- a
+zero-length octet string SHALL be returned on an attempt to
+read this object and an attempt to change this object MUST be
+rejected in this case.
+
+Note that the current operational profile value is available
+via the efmCuPmeOperProfile object.
+
+Any modification of this object MUST be performed when the
+link is Down.  Attempts to change this object MUST be
+rejected, if the link is Up or Initializing.
+Attempts to set this object to a list with a member value that
+is not the value of the index for an active entry in the
+corresponding profile table MUST be rejected.
+
+This object maps to the Clause 30 attribute aProfileSelect.
+
+This object MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] 30.11.2.1.6""",
+        }, # column
+        "efmCuTargetDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "100000"
+                    },
+                    {
+                        "min" : "999999",
+                        "max" : "999999"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "999999"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Kbps",
+            "description" :
+                """Desired EFMCu port 'net' (as seen across MII) Data Rate in
+Kbps, to be achieved during initialization, under spectral
+restrictions placed on each PME via efmCuAdminProfile or
+
+
+
+efmCuPmeAdminProfile, with the desired SNR margin specified by
+efmCuTargetSnrMgn.
+In case of PAF, this object represents a sum of individual PME
+data rates, modified to compensate for fragmentation and
+64/65-octet encapsulation overhead (e.g., target data rate of
+10 Mbps SHALL allow lossless transmission of a full-duplex
+10 Mbps Ethernet frame stream with minimal inter-frame gap).
+
+The value is limited above by 100 Mbps as this is the max
+burst rate across MII for EFMCu ports.
+
+The value between 1 and 100000 indicates that the total data
+rate (ifSpeed) of the EFMCu port after initialization SHALL be
+equal to the target data rate or less, if the target data rate
+cannot be achieved under spectral restrictions specified by
+efmCuAdminProfile/efmCuPmeAdminProfile and with the desired
+SNR margin.  In case the copper environment allows a higher
+total data rate to be achieved than that specified by the
+target, the excess capability SHALL be either converted to
+additional SNR margin or reclaimed by minimizing transmit
+power as controlled by efmCuAdaptiveSpectra.
+
+The value of 999999 means that the target data rate is not
+fixed and SHALL be set to the maximum attainable rate during
+initialization (Best Effort), under specified spectral
+restrictions and with the desired SNR margin.
+
+This object is read-write for the -O subtype EFMCu ports
+(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+Changing of the Target Data Rate MUST be performed when the
+link is Down.  Attempts to change this object MUST be rejected
+(in case of SNMP with the error inconsistentValue), if the
+link is Up or Initializing.
+
+Note that the current Data Rate of the EFMCu port is
+represented by the ifSpeed object of IF-MIB.
+
+This object MUST be maintained in a persistent manner.""",
+        }, # column
+        "efmCuTargetSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "21"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "21"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "dB",
+            "description" :
+                """Desired EFMCu port SNR margin to be achieved on all PMEs
+
+
+
+assigned to the port, during initialization. (The SNR margin
+is the difference between the desired SNR and the actual SNR).
+
+Note that 802.3ah recommends using a default target SNR margin
+of 5 dB for 2BASE-TL ports and 6 dB for 10PASS-TS ports in
+order to achieve a mean Bit Error Rate (BER) of 10^-7 at the
+PMA service interface.
+
+This object is read-write for the -O subtype EFMCu ports
+(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+Changing of the target SNR margin MUST be performed when the
+link is Down.  Attempts to change this object MUST be rejected
+(in case of SNMP with the error inconsistentValue), if the
+link is Up or Initializing.
+
+Note that the current SNR margin of the PMEs comprising the
+EFMCu port is represented by efmCuPmeSnrMgn.
+
+This object MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] 61.1.2""",
+        }, # column
+        "efmCuAdaptiveSpectra" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates how to utilize excess capacity when the copper
+environment allows a higher total data rate to be achieved
+than that specified by the efmCuTargetDataRate.
+
+A value of true(1) indicates that the excess capability SHALL
+be reclaimed by minimizing transmit power, e.g., using higher
+constellations and Power Back-Off, in order to reduce
+interference to other copper pairs in the binder and the
+adverse impact to link/system performance.
+
+A value of false(2) indicates that the excess capability SHALL
+be converted to additional SNR margin and spread evenly across
+all active PMEs assigned to the (PCS) port, to increase link
+robustness.
+
+This object is read-write for the -O subtype EFMCu ports
+(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+Changing of this object MUST be performed when the link is
+
+
+
+Down.  Attempts to change this object MUST be rejected (in
+case of SNMP with the error inconsistentValue), if the link
+is Up or Initializing.
+
+This object MUST be maintained in a persistent manner.""",
+        }, # column
+        "efmCuThreshLowRate" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "100000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "100000"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Kbps",
+            "description" :
+                """This object configures the EFMCu port low-rate crossing alarm
+threshold.  When the current value of ifSpeed for this port
+reaches/drops below or exceeds this threshold, an
+efmCuLowRateCrossing notification MAY be generated if enabled
+by efmCuLowRateCrossingEnable.
+
+This object is read-write for the -O subtype EFMCu ports
+(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+This object MUST be maintained in a persistent manner.""",
+        }, # column
+        "efmCuLowRateCrossingEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether efmCuLowRateCrossing notifications should
+be generated for this interface.
+
+A value of true(1) indicates that efmCuLowRateCrossing
+notification is enabled.  A value of false(2) indicates that
+the notification is disabled.
+
+This object is read-write for the -O subtype EFMCu ports
+(2BaseTL-O/10PassTS-O) and not available for the -R subtypes.
+
+This object MUST be maintained in a persistent manner.""",
+        }, # column
+        "efmCuPortCapabilityTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.2",
+            "status" : "current",
+            "description" :
+                """Table for Capabilities of EFMCu 2BASE-TL/10PASS-TS (PCS)
+Ports.  Entries in this table MUST be maintained in a
+persistent manner""",
+        }, # table
+        "efmCuPortCapabilityEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the EFMCu Port Capability table.
+Each entry represents an EFMCu port indexed by the ifIndex.
+Note that an EFMCu PCS port runs on top of a single
+or multiple PME port(s), which are also indexed by ifIndex.""",
+        }, # row
+        "efmCuPAFSupported" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """PME Aggregation Function (PAF) capability of the EFMCu port
+(PCS).
+This object has a value of true(1) when the PCS can perform
+PME aggregation on the available PMEs.
+Ports incapable of PAF SHALL return a value of false(2).
+
+This object maps to the Clause 30 attribute aPAFSupported.
+
+If a Clause 45 MDIO Interface to the PCS is present,
+then this object maps to the PAF available bit in the
+10P/2B capability register.""",
+            "reference" :
+                """[802.3ah] 61.2.2, 30.11.1.1.4, 45.2.3.17.1""",
+        }, # column
+        "efmCuPeerPAFSupported" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmTruthValueOrUnknown"},
+            },
+            "access" : "readonly",
+            "description" :
+                """PME Aggregation Function (PAF) capability of the EFMCu port
+(PCS) link partner.
+This object has a value of true(1) when the remote PCS can
+perform PME aggregation on its available PMEs.
+Ports whose peers are incapable of PAF SHALL return a value
+of false(2).
+Ports whose peers cannot be reached because of the link
+state SHALL return a value of unknown(0).
+
+This object maps to the Clause 30 attribute
+aRemotePAFSupported.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the Remote PAF supported bit in the
+10P/2B capability register.""",
+            "reference" :
+                """[802.3ah] 61.2.2, 30.11.1.1.9, 45.2.3.17.2""",
+        }, # column
+        "efmCuPAFCapacity" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of PMEs that can be aggregated by the local PAF.
+The number of PMEs currently assigned to a particular
+EFMCu port (efmCuNumPMEs) is never greater than
+efmCuPAFCapacity.
+
+This object maps to the Clause 30 attribute
+aLocalPAFCapacity.""",
+            "reference" :
+                """[802.3ah] 61.2.2, 30.11.1.1.6""",
+        }, # column
+        "efmCuPeerPAFCapacity" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of PMEs that can be aggregated by the PAF of the peer
+PHY (PCS port).
+A value of 0 is returned when peer PAF capacity is unknown
+(peer cannot be reached).
+
+
+
+
+This object maps to the Clause 30 attribute
+aRemotePAFCapacity.""",
+            "reference" :
+                """[802.3ah] 61.2.2, 30.11.1.1.10""",
+        }, # column
+        "efmCuPortStatusTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3",
+            "status" : "current",
+            "description" :
+                """This table provides overall status information of EFMCu
+2BASE-TL/10PASS-TS ports, complementing the generic status
+information from the ifTable of IF-MIB and ifMauTable of
+MAU-MIB.  Additional status information about connected PMEs
+is available from the efmCuPmeStatusTable.
+
+This table contains live data from the equipment.  As such,
+it is NOT persistent.""",
+        }, # table
+        "efmCuPortStatusEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the EFMCu Port Status table.
+Each entry represents an EFMCu port indexed by the ifIndex.
+Note that an EFMCu PCS port runs on top of a single
+or multiple PME port(s), which are also indexed by ifIndex.""",
+        }, # row
+        "efmCuFltStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "noPeer" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "peerPowerLoss" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "pmeSubTypeMismatch" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "lowRate" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """EFMCu (PCS) port Fault Status.  This is a bitmap of possible
+conditions.  The various bit positions are:
+  noPeer              - the peer PHY cannot be reached (e.g.,
+                        no PMEs attached, all PMEs are Down,
+                        etc.). More info is available in
+                        efmCuPmeFltStatus.
+  peerPowerLoss       - the peer PHY has indicated impending
+                        unit failure due to loss of local
+                        power ('Dying Gasp').
+  pmeSubTypeMismatch  - local PMEs in the aggregation group
+                        are not of the same subtype, e.g.,
+                        some PMEs in the local device are -O
+                        while others are -R subtype.
+  lowRate             - ifSpeed of the port reached or dropped
+                        below efmCuThreshLowRate.
+
+This object is intended to supplement the ifOperStatus object
+in IF-MIB and ifMauMediaAvailable in MAU-MIB.
+
+Additional information is available via the efmCuPmeFltStatus
+object for each PME in the aggregation group (single PME if
+PAF is disabled).""",
+            "reference" :
+                """IF-MIB, ifOperStatus; MAU-MIB, ifMauMediaAvailable;
+efmCuPmeFltStatus""",
+        }, # column
+        "efmCuPortSide" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "subscriber" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "office" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """EFM port mode of operation (subtype).
+The value of 'subscriber' indicates that the port is
+
+
+
+designated as '-R' subtype (all PMEs assigned to this port are
+of subtype '-R').
+The value of the 'office' indicates that the port is
+designated as '-O' subtype (all PMEs assigned to this port are
+of subtype '-O').
+The value of 'unknown' indicates that the port has no assigned
+PMEs yet or that the assigned PMEs are not of the same side
+(subTypePMEMismatch).
+
+This object partially maps to the Clause 30 attribute
+aPhyEnd.""",
+            "reference" :
+                """[802.3ah] 61.1, 30.11.1.1.2""",
+        }, # column
+        "efmCuNumPMEs" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of PMEs that is currently aggregated by the local
+PAF (assigned to the EFMCu port using the ifStackTable).
+This number is never greater than efmCuPAFCapacity.
+
+This object SHALL be automatically incremented or decremented
+when a PME is added or deleted to/from the EFMCu port using
+the ifStackTable.""",
+            "reference" :
+                """[802.3ah] 61.2.2, 30.11.1.1.6""",
+        }, # column
+        "efmCuPAFInErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of fragments that have been received across the
+gamma interface with RxErr asserted and discarded.
+This read-only counter is inactive (not incremented) when the
+PAF is unsupported or disabled.  Upon disabling the PAF, the
+counter retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF RX error register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+
+
+
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.21""",
+        }, # column
+        "efmCuPAFInSmallFragments" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of fragments smaller than minFragmentSize
+(64 bytes) that have been received across the gamma interface
+and discarded.
+This read-only counter is inactive when the PAF is
+unsupported or disabled.  Upon disabling the PAF, the counter
+retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF small fragments register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.22""",
+        }, # column
+        "efmCuPAFInLargeFragments" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of fragments larger than maxFragmentSize
+(512 bytes) that have been received across the gamma interface
+and discarded.
+This read-only counter is inactive when the PAF is
+unsupported or disabled.  Upon disabling the PAF, the counter
+retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF large fragments register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.23""",
+        }, # column
+        "efmCuPAFInBadFragments" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of fragments that do not fit into the sequence
+expected by the frame assembly function and that have been
+received across the gamma interface and discarded (the
+frame buffer is flushed to the next valid frame start).
+This read-only counter is inactive when the PAF is
+unsupported or disabled.  Upon disabling the PAF, the counter
+retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF bad fragments register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.25""",
+        }, # column
+        "efmCuPAFInLostFragments" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of gaps in the sequence of fragments that have
+been received across the gamma interface (the frame buffer is
+flushed to the next valid frame start, when fragment/fragments
+expected by the frame assembly function is/are not received).
+This read-only counter is inactive when the PAF is
+unsupported or disabled.  Upon disabling the PAF, the counter
+retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF lost fragment register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.26""",
+        }, # column
+        "efmCuPAFInLostStarts" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of missing StartOfPacket indicators expected by
+the frame assembly function.
+This read-only counter is inactive when the PAF is
+unsupported or disabled.  Upon disabling the PAF, the counter
+retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF lost start of fragment
+register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.27""",
+        }, # column
+        "efmCuPAFInLostEnds" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of missing EndOfPacket indicators expected by the
+frame assembly function.
+This read-only counter is inactive when the PAF is
+unsupported or disabled.  Upon disabling the PAF, the counter
+retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF lost start of fragment
+register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.28""",
+        }, # column
+        "efmCuPAFInOverflows" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of fragments, received across the gamma interface
+and discarded, which would have caused the frame assembly
+buffer to overflow.
+This read-only counter is inactive when the PAF is
+unsupported or disabled.  Upon disabling the PAF, the counter
+retains its previous value.
+
+If a Clause 45 MDIO Interface to the PCS is present, then
+this object maps to the 10P/2B PAF overflow register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.3.24""",
+        }, # column
+        "efmCuPme" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2",
+        }, # node
+        "efmCuPmeNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.0",
+        }, # node
+        "efmCuPmeConfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1",
+            "status" : "current",
+            "description" :
+                """Table for Configuration of common aspects for EFMCu
+2BASE-TL/10PASS-TS PME ports (modems).  Configuration of
+aspects specific to 2BASE-TL or 10PASS-TS PME types is
+represented in efmCuPme2BConfTable and efmCuPme10PConfTable,
+respectively.
+
+Entries in this table MUST be maintained in a persistent
+manner.""",
+        }, # table
+        "efmCuPmeConfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the EFMCu PME Configuration table.
+Each entry represents common aspects of an EFMCu PME port
+indexed by the ifIndex.  Note that an EFMCu PME port can be
+stacked below a single PCS port, also indexed by ifIndex,
+possibly together with other PME ports if PAF is enabled.""",
+        }, # row
+        "efmCuPmeAdminSubType" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "ieee2BaseTLO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ieee2BaseTLR" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "ieee10PassTSO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "ieee10PassTSR" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "ieee2BaseTLor10PassTSR" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "ieee2BaseTLor10PassTSO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "ieee10PassTSor2BaseTLO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Administrative (desired) subtype of the PME.
+Possible values are:
+  ieee2BaseTLO           - PME SHALL operate as 2BaseTL-O
+  ieee2BaseTLR           - PME SHALL operate as 2BaseTL-R
+  ieee10PassTSO          - PME SHALL operate as 10PassTS-O
+  ieee10PassTSR          - PME SHALL operate as 10PassTS-R
+  ieee2BaseTLor10PassTSR - PME SHALL operate as 2BaseTL-R or
+                           10PassTS-R.  The actual value will
+                           be set by the -O link partner
+                           during initialization (handshake).
+  ieee2BaseTLor10PassTSO - PME SHALL operate as 2BaseTL-O
+                           (preferred) or 10PassTS-O.  The
+                           actual value will be set during
+                           initialization depending on the -R
+                           link partner capability (i.e., if
+                           -R is incapable of the preferred
+                           2BaseTL mode, 10PassTS will be
+                           used).
+  ieee10PassTSor2BaseTLO - PME SHALL operate as 10PassTS-O
+
+
+
+                           (preferred) or 2BaseTL-O.  The
+                           actual value will be set during
+                           initialization depending on the -R
+                           link partner capability (i.e., if
+                           -R is incapable of the preferred
+                           10PassTS mode, 2BaseTL will be
+                           used).
+
+Changing efmCuPmeAdminSubType is a traffic-disruptive
+operation and as such SHALL be done when the link is Down.
+Attempts to change this object SHALL be rejected if the link
+is Up or Initializing.
+Attempts to change this object to an unsupported subtype
+(see efmCuPmeSubTypesSupported) SHALL be rejected.
+
+The current operational subtype is indicated by the
+efmCuPmeOperSubType variable.
+
+If a Clause 45 MDIO Interface to the PMA/PMD is present, then
+this object combines values of the Port subtype select bits
+and the PMA/PMD type selection bits in the 10P/2B PMA/PMD
+control register.""",
+            "reference" :
+                """[802.3ah] 61.1, 45.2.1.11.4, 45.2.1.11.7""",
+        }, # column
+        "efmCuPmeAdminProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Desired PME configuration profile.  This object is a pointer
+to an entry in either the efmCuPme2BProfileTable or the
+efmCuPme10PProfileTable, depending on the current operating
+SubType of the PME.  The value of this object is the index of
+the referenced profile.
+The value of zero (default) indicates that the PME is
+configured via the efmCuAdminProfile object for the PCS port
+to which this PME is assigned.  That is, the profile
+referenced by efmCuPmeAdminProfile takes precedence
+over the profile(s) referenced by efmCuAdminProfile.
+
+This object is writable and readable for the CO subtype PMEs
+(2BaseTL-O or 10PassTS-O). It is irrelevant for the CPE
+subtype (2BaseTL-R or 10PassTS-R) -- a zero value SHALL be
+returned on an attempt to read this object and any attempt
+to change this object MUST be rejected in this case.
+
+
+
+
+Note that the current operational profile value is available
+via efmCuPmeOperProfile object.
+
+Any modification of this object MUST be performed when the
+link is Down.  Attempts to change this object MUST be
+rejected, if the link is Up or Initializing.
+
+Attempts to set this object to a value that is not the value
+of the index for an active entry in the corresponding profile
+table MUST be rejected.
+
+This object maps to the Clause 30 attribute aProfileSelect.
+
+This object MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] 30.11.2.1.6""",
+        }, # column
+        "efmCuPAFRemoteDiscoveryCode" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "PhysAddress",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "6",
+                        "max" : "6"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """PAF Remote Discovery Code of the PME port at the CO.
+The 6-octet Discovery Code of the peer PCS connected via
+the PME.
+Reading this object results in a Discovery Get operation.
+Setting this object to all zeroes results in a Discovery
+Clear_if_Same operation (the value of efmCuPAFDiscoveryCode
+at the peer PCS SHALL be the same as efmCuPAFDiscoveryCode of
+the local PCS associated with the PME for the operation to
+succeed).
+Writing a non-zero value to this object results in a
+Discovery Set_if_Clear operation.
+A zero-length octet string SHALL be returned on an attempt to
+read this object when PAF aggregation is not enabled.
+
+This object is irrelevant in CPE port (-R) subtypes: in this
+case, a zero-length octet string SHALL be returned on an
+attempt to read this object; writing to this object SHALL
+be rejected.
+
+Discovery MUST be performed when the link is Down.
+Attempts to change this object MUST be rejected (in case of
+SNMP with the error inconsistentValue), if the link is Up or
+Initializing.
+
+
+
+
+If a Clause 45 MDIO Interface to the PMA/PMD is present, then
+this object is a function of 10P/2B aggregation discovery
+control register, Discovery operation result bits in 10P/2B
+aggregation and discovery status register and
+10P/2B aggregation discovery code register.""",
+            "reference" :
+                """[802.3ah] 61.2.2.8.4, 45.2.6.6-45.2.6.8""",
+        }, # column
+        "efmCuPmeThreshLineAtn" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "dB",
+            "description" :
+                """Desired Line Attenuation threshold for the 2B/10P PME.
+This object configures the line attenuation alarm threshold.
+When the current value of Line Attenuation reaches or
+exceeds this threshold, an efmCuPmeLineAtnCrossing
+notification MAY be generated, if enabled by
+efmCuPmeLineAtnCrossingEnable.
+
+This object is writable for the CO subtype PMEs (-O).
+It is read-only for the CPE subtype (-R).
+
+Changing of the Line Attenuation threshold MUST be performed
+when the link is Down.  Attempts to change this object MUST be
+rejected (in case of SNMP with the error inconsistentValue),
+if the link is Up or Initializing.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object maps to the loop attenuation threshold bits in
+the 2B PMD line quality thresholds register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.36""",
+        }, # column
+        "efmCuPmeThreshSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "dB",
+            "description" :
+                """Desired SNR margin threshold for the 2B/10P PME.
+This object configures the SNR margin alarm threshold.
+When the current value of SNR margin reaches or exceeds this
+threshold, an efmCuPmeSnrMgnCrossing notification MAY be
+generated, if enabled by efmCuPmeSnrMgnCrossingEnable.
+
+
+
+This object is writable for the CO subtype PMEs
+(2BaseTL-O/10PassTS-O).  It is read-only for the CPE subtype
+(2BaseTL-R/10PassTS-R).
+
+Changing of the SNR margin threshold MUST be performed when
+the link is Down.  Attempts to change this object MUST be
+rejected (in case of SNMP with the error inconsistentValue),
+if the link is Up or Initializing.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object maps to the SNR margin threshold bits in the 2B PMD
+line quality thresholds register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.36""",
+        }, # column
+        "efmCuPmeLineAtnCrossingEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether efmCuPmeLineAtnCrossing notifications
+should be generated for this interface.
+
+A value of true(1) indicates that efmCuPmeLineAtnCrossing
+notification is enabled.  A value of false(2) indicates that
+the notification is disabled.""",
+        }, # column
+        "efmCuPmeSnrMgnCrossingEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether efmCuPmeSnrMgnCrossing notifications
+should be generated for this interface.
+
+A value of true(1) indicates that efmCuPmeSnrMgnCrossing
+notification is enabled.  A value of false(2) indicates that
+the notification is disabled.""",
+        }, # column
+        "efmCuPmeDeviceFaultEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether efmCuPmeDeviceFault notifications
+
+
+
+should be generated for this interface.
+
+A value of true(1) indicates that efmCuPmeDeviceFault
+notification is enabled.  A value of false(2) indicates that
+the notification is disabled.""",
+        }, # column
+        "efmCuPmeConfigInitFailEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether efmCuPmeConfigInitFailure notifications
+should be generated for this interface.
+
+A value of true(1) indicates that efmCuPmeConfigInitFailure
+notification is enabled.  A value of false(2) indicates that
+the notification is disabled.""",
+        }, # column
+        "efmCuPmeProtocolInitFailEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether efmCuPmeProtocolInitFailure notifications
+should be generated for this interface.
+
+A value of true(1) indicates that efmCuPmeProtocolInitFailure
+notification is enabled.  A value of false(2) indicates that
+the notification is disabled.""",
+        }, # column
+        "efmCuPmeCapabilityTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.2",
+            "status" : "current",
+            "description" :
+                """Table for the configuration of common aspects for EFMCu
+2BASE-TL/10PASS-TS PME ports (modems).  The configuration of
+aspects specific to 2BASE-TL or 10PASS-TS PME types is
+represented in the efmCuPme2BConfTable and the
+efmCuPme10PConfTable, respectively.
+
+Entries in this table MUST be maintained in a persistent
+manner.""",
+        }, # table
+        "efmCuPmeCapabilityEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the EFMCu PME Capability table.
+Each entry represents common aspects of an EFMCu PME port
+indexed by the ifIndex.  Note that an EFMCu PME port can be
+stacked below a single PCS port, also indexed by ifIndex,
+possibly together with other PME ports if PAF is enabled.""",
+        }, # row
+        "efmCuPmeSubTypesSupported" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "ieee2BaseTLO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "ieee2BaseTLR" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ieee10PassTSO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "ieee10PassTSR" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """PME supported subtypes.  This is a bitmap of possible
+subtypes.  The various bit positions are:
+  ieee2BaseTLO    - PME is capable of operating as 2BaseTL-O
+  ieee2BaseTLR    - PME is capable of operating as 2BaseTL-R
+  ieee10PassTSO   - PME is capable of operating as 10PassTS-O
+  ieee10PassTSR   - PME is capable of operating as 10PassTS-R
+
+The desired mode of operation is determined by
+efmCuPmeAdminSubType, while efmCuPmeOperSubType reflects the
+current operating mode.
+
+If a Clause 45 MDIO Interface to the PCS is present, then this
+object combines the 10PASS-TS capable and 2BASE-TL capable
+bits in the 10P/2B PMA/PMD speed ability register and the
+CO supported and CPE supported bits in the 10P/2B PMA/PMD
+status register.""",
+            "reference" :
+                """[802.3ah] 61.1, 45.2.1.4.1, 45.2.1.4.2, 45.2.1.12.2,
+45.2.1.12.3""",
+        }, # column
+        "efmCuPmeStatusTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3",
+            "status" : "current",
+            "description" :
+                """This table provides common status information of EFMCu
+2BASE-TL/10PASS-TS PME ports.  Status information specific
+to 10PASS-TS PME is represented in efmCuPme10PStatusTable.
+
+This table contains live data from the equipment.  As such,
+it is NOT persistent.""",
+        }, # table
+        "efmCuPmeStatusEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the EFMCu PME Status table.
+Each entry represents common aspects of an EFMCu PME port
+indexed by the ifIndex.  Note that an EFMCu PME port can be
+stacked below a single PCS port, also indexed by ifIndex,
+possibly together with other PME ports if PAF is enabled.""",
+        }, # row
+        "efmCuPmeOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "up" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "downNotReady" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "downReady" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "init" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Current PME link Operational Status.  Possible values are:
+up(1)           - The link is Up and ready to pass
+                  64/65-octet encoded frames or fragments.
+downNotReady(2) - The link is Down and the PME does not
+                  detect Handshake tones from its peer.
+                  This value may indicate a possible
+                  problem with the peer PME.
+downReady(3)    - The link is Down and the PME detects
+                  Handshake tones from its peer.
+init(4)         - The link is Initializing, as a result of
+                  ifAdminStatus being set to 'up' for a
+                  particular PME or a PCS to which the PME
+                  is connected.
+
+This object is intended to supplement the Down(2) state of
+ifOperStatus.
+
+This object partially maps to the Clause 30 attribute
+aPMEStatus.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object partially maps to PMA/PMD link status bits in 10P/2B
+PMA/PMD status register.""",
+            "reference" :
+                """[802.3ah] 30.11.2.1.3, 45.2.1.12.4""",
+        }, # column
+        "efmCuPmeFltStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "lossOfFraming" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "snrMgnDefect" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "lineAtnDefect" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "deviceFault" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "configInitFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "protocolInitFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Current/Last PME link Fault Status.  This is a bitmap of
+possible conditions.  The various bit positions are:
+
+  lossOfFraming       - Loss of Framing for 10P or
+                        Loss of Sync word for 2B PMD or
+                        Loss of 64/65-octet framing.
+
+
+
+  snrMgnDefect        - SNR margin dropped below the
+                        threshold.
+  lineAtnDefect       - Line Attenuation exceeds the
+                        threshold.
+  deviceFault         - Indicates a vendor-dependent
+                        diagnostic or self-test fault
+                        has been detected.
+  configInitFailure   - Configuration initialization failure,
+                        due to inability of the PME link to
+                        support the configuration profile,
+                        requested during initialization.
+  protocolInitFailure - Protocol initialization failure, due
+                        to an incompatible protocol used by
+                        the peer PME during init (that could
+                        happen if a peer PMD is a regular
+                        G.SDHSL/VDSL modem instead of a
+                        2BASE-TL/10PASS-TS PME).
+
+This object is intended to supplement ifOperStatus in IF-MIB.
+
+This object holds information about the last fault.
+efmCuPmeFltStatus is cleared by the device restart.
+In addition, lossOfFraming, configInitFailure, and
+protocolInitFailure are cleared by PME init;
+deviceFault is cleared by successful diagnostics/test;
+snrMgnDefect and lineAtnDefect are cleared by SNR margin
+and Line attenuation, respectively, returning to norm and by
+PME init.
+
+This object partially maps to the Clause 30 attribute
+aPMEStatus.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object consolidates information from various PMA/PMD
+registers, namely: Fault bit in PMA/PMD status 1 register,
+10P/2B PMA/PMD link loss register,
+10P outgoing indicator bits status register,
+10P incoming indicator bits status register,
+2B state defects register.""",
+            "reference" :
+                """[802.3ah] 30.11.2.1.3, 45.2.1.2.1, 45.2.1.38,
+45.2.1.39, 45.2.1.54""",
+        }, # column
+        "efmCuPmeOperSubType" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "ieee2BaseTLO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ieee2BaseTLR" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "ieee10PassTSO" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "ieee10PassTSR" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Current operational subtype of the PME.
+Possible values are:
+  ieee2BaseTLO           - PME operates as 2BaseTL-O
+  ieee2BaseTLR           - PME operates as 2BaseTL-R
+  ieee10PassTSO          - PME operates as 10PassTS-O
+  ieee10PassTSR          - PME operates as 10PassTS-R
+
+The desired operational subtype of the PME can be configured
+via the efmCuPmeAdminSubType variable.
+
+If a Clause 45 MDIO Interface to the PMA/PMD is present, then
+this object combines values of the Port subtype select
+bits, the PMA/PMD type selection bits in the 10P/2B
+PMA/PMD control register, and the PMA/PMD link status bits in
+the 10P/2B PMA/PMD status register.""",
+            "reference" :
+                """[802.3ah] 61.1, 45.2.1.11.4, 45.2.1.11.7, 45.2.1.12.4""",
+        }, # column
+        "efmCuPmeOperProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndexOrZero"},
+            },
+            "access" : "readonly",
+            "description" :
+                """PME current operating profile.  This object is a pointer to
+an entry in either the efmCuPme2BProfileTable or the
+efmCuPme10PProfileTable, depending on the current operating
+SubType of the PME as indicated by efmCuPmeOperSubType.
+Note that a profile entry to which efmCuPmeOperProfile is
+pointing can be created automatically to reflect achieved
+parameters in adaptive (not fixed) initialization,
+i.e., values of efmCuPmeOperProfile and efmCuAdminProfile or
+efmCuPmeAdminProfile may differ.
+The value of zero indicates that the PME is Down or
+Initializing.
+
+This object partially maps to the aOperatingProfile attribute
+in Clause 30.""",
+            "reference" :
+                """[802.3ah] 30.11.2.1.7""",
+        }, # column
+        "efmCuPmeSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    {
+                        "min" : "65535",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "dB",
+            "description" :
+                """The current Signal to Noise Ratio (SNR) margin with respect
+to the received signal as perceived by the local PME.
+The value of 65535 is returned when the PME is Down or
+Initializing.
+
+This object maps to the aPMESNRMgn attribute in Clause 30.
+
+If a Clause 45 MDIO Interface is present, then this
+object maps to the 10P/2B RX SNR margin register.""",
+            "reference" :
+                """[802.3ah] 30.11.2.1.4, 45.2.1.16""",
+        }, # column
+        "efmCuPmePeerSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    {
+                        "min" : "65535",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "dB",
+            "description" :
+                """The current SNR margin in dB with respect to the received
+signal, as perceived by the remote (link partner) PME.
+The value of 65535 is returned when the PME is Down or
+Initializing.
+
+This object is irrelevant for the -R PME subtypes.  The value
+of 65535 SHALL be returned in this case.
+
+If a Clause 45 MDIO Interface is present, then this
+object maps to the 10P/2B link partner RX SNR margin
+register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.17""",
+        }, # column
+        "efmCuPmeLineAtn" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    {
+                        "min" : "65535",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "dB",
+            "description" :
+                """The current Line Attenuation in dB as perceived by the local
+PME.
+
+
+
+The value of 65535 is returned when the PME is Down or
+Initializing.
+
+If a Clause 45 MDIO Interface is present, then this
+object maps to the Line Attenuation register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.18""",
+        }, # column
+        "efmCuPmePeerLineAtn" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    {
+                        "min" : "65535",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "dB",
+            "description" :
+                """The current Line Attenuation in dB as perceived by the remote
+(link partner) PME.
+The value of 65535 is returned when the PME is Down or
+Initializing.
+
+This object is irrelevant for the -R PME subtypes.  The value
+of 65535 SHALL be returned in this case.
+
+If a Clause 45 MDIO Interface is present, then this
+object maps to the 20P/2B link partner Line Attenuation
+register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.19""",
+        }, # column
+        "efmCuPmeEquivalentLength" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "8192"
+                    },
+                    {
+                        "min" : "65535",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "m",
+            "description" :
+                """An estimate of the equivalent loop's physical length in
+meters, as perceived by the PME after the link is established.
+An equivalent loop is a hypothetical 26AWG (0.4mm) loop with a
+perfect square root attenuation characteristic, without any
+bridged taps.
+The value of 65535 is returned if the link is Down or
+Initializing or the PME is unable to estimate the equivalent
+length.
+
+For a 10BASE-TL PME, if a Clause 45 MDIO Interface to the PME
+is present, then this object maps to the 10P Electrical Length
+register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.21""",
+        }, # column
+        "efmCuPmeTCCodingErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of 64/65-octet encapsulation errors.  This counter
+is incremented for each 64/65-octet encapsulation error
+detected by the 64/65-octet receive function.
+
+This object maps to aTCCodingViolations attribute in
+Clause 30.
+
+If a Clause 45 MDIO Interface to the PME TC is present, then
+this object maps to the TC coding violations register
+(see 45.2.6.12).
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 61.3.3.1, 30.11.2.1.5, 45.2.6.12""",
+        }, # column
+        "efmCuPmeTCCrcErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of TC-CRC errors.  This counter is incremented for
+each TC-CRC error detected by the 64/65-octet receive function
+(see 61.3.3.3 and Figure 61-19).
+
+This object maps to aTCCRCErrors attribute in
+Clause 30.
+
+If a Clause 45 MDIO Interface to the PME TC is present, then
+this object maps to the TC CRC error register
+(see 45.2.6.11).
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 61.3.3.3, 30.11.2.1.10, 45.2.6.11""",
+        }, # column
+        "efmCuPme2B" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5",
+        }, # node
+        "efmCuPme2BProfileTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2",
+            "status" : "current",
+            "description" :
+                """This table supports definitions of administrative and
+operating profiles for 2BASE-TL PMEs.
+The first 14 entries in this table SHALL always be defined as
+follows (see 802.3ah Annex 63A):
+-------+-------+-------+-----+------+-------------+-----------
+Profile MinRate MaxRate Power Region Constellation Comment
+ index  (Kbps)  (Kbps)  (dBm)
+-------+-------+-------+-----+------+-------------+-----------
+   1     5696    5696    13.5    1   32-TCPAM      default
+   2     3072    3072    13.5    1   32-TCPAM
+   3     2048    2048    13.5    1   16-TCPAM
+   4     1024    1024    13.5    1   16-TCPAM
+   5      704     704    13.5    1   16-TCPAM
+   6      512     512    13.5    1   16-TCPAM
+   7     5696    5696    14.5    2   32-TCPAM
+   8     3072    3072    14.5    2   32-TCPAM
+   9     2048    2048    14.5    2   16-TCPAM
+  10     1024    1024    13.5    2   16-TCPAM
+  11      704     704    13.5    2   16-TCPAM
+  12      512     512    13.5    2   16-TCPAM
+  13      192    5696       0    1   0             best effort
+  14      192    5696       0    2   0             best effort
+-------+-------+-------+-----+------+-------------+-----------
+
+These default entries SHALL be created during agent
+initialization and MUST NOT be deleted.
+
+Entries following the first 14 can be dynamically created and
+deleted to provide custom administrative (configuration)
+profiles and automatic operating profiles.
+
+This table MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] Annex 63A, 30.11.2.1.6""",
+        }, # table
+        "efmCuPme2BProfileEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "efmCuPme2BProfileIndex",
+            ],
+            "description" :
+                """Each entry corresponds to a single 2BASE-TL PME profile.
+Each profile contains a set of parameters, used either for
+configuration or representation of a 2BASE-TL PME.
+In case a particular profile is referenced via the
+efmCuPmeAdminProfile object (or efmCuAdminProfile if
+efmCuPmeAdminProfile is zero), it represents the desired
+parameters for the 2BaseTL-O PME initialization.
+If a profile is referenced via an efmCuPmeOperProfile object,
+it represents the current operating parameters of an
+operational PME.
+
+Profiles may be created/deleted using the row creation/
+deletion mechanism via efmCuPme2BProfileRowStatus.  If an
+active entry is referenced, the entry MUST remain 'active'
+until all references are removed.
+Default entries MUST NOT be removed.""",
+        }, # row
+        "efmCuPme2BProfileIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """2BASE-TL PME profile index.
+This object is the unique index associated with this profile.
+Entries in this table are referenced via efmCuAdminProfile or
+efmCuPmeAdminProfile objects.""",
+        }, # column
+        "efmCuPme2BProfileDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """A textual string containing information about a 2BASE-TL PME
+profile.  The string may include information about the data
+rate and spectral limitations of this particular profile.""",
+        }, # column
+        "efmCuPme2BRegion" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "region1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "region2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Regional settings for a 2BASE-TL PME, as specified in the
+relevant Regional Annex of [G.991.2].
+Regional settings specify the Power Spectral Density (PSD)
+mask and the Power Back-Off (PBO) values, and place
+limitations on the max allowed data rate, power, and
+constellation.
+
+Possible values for this object are:
+  region1      - Annexes A and F (e.g., North America)
+  region2      - Annexes B and G (e.g., Europe)
+
+Annex A/B specify regional settings for data rates 192-2304
+Kbps using 16-TCPAM encoding.
+Annex F/G specify regional settings for rates 2320-3840 Kbps
+using 16-TCPAM encoding and 768-5696 Kbps using 32-TCPAM
+encoding.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object partially maps to the Region bits in the 2B general
+parameter register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.42; [G.991.2] Annexes A, B, F and G""",
+        }, # column
+        "efmCuPme2BsMode" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Desired custom Spectral Mode for a 2BASE-TL PME.  This object
+
+
+
+is a pointer to an entry in efmCuPme2BsModeTable and a block
+of entries in efmCuPme2BRateReachTable, which together define
+(country-specific) reach-dependent rate limitations in
+addition to those defined by efmCuPme2BRegion.
+
+The value of this object is the index of the referenced
+spectral mode.
+The value of zero (default) indicates that no specific
+spectral mode is applicable.
+
+Attempts to set this object to a value that is not the value
+of the index for an active entry in the corresponding spectral
+mode table MUST be rejected.""",
+            "reference" :
+                """efmCuPme2BsModeTable, efmCuPme2BRateReachTable""",
+        }, # column
+        "efmCuPme2BMinDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "192",
+                        "max" : "5696"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "192",
+                        "max" : "5696"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Kbps",
+            "description" :
+                """Minimum Data Rate for the 2BASE-TL PME.
+This object can take values of (n x 64)Kbps,
+where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
+
+The data rate of the 2BASE-TL PME is considered 'fixed' when
+the value of this object equals that of efmCuPme2BMaxDataRate.
+If efmCuPme2BMinDataRate is less than efmCuPme2BMaxDataRate in
+the administrative profile, the data rate is considered
+'adaptive', and SHALL be set to the maximum attainable rate
+not exceeding efmCuPme2BMaxDataRate, under the spectral
+limitations placed by the efmCuPme2BRegion and
+efmCuPme2BsMode.
+
+Note that the current operational data rate of the PME is
+represented by the ifSpeed object of IF-MIB.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object maps to the Min Data Rate1 bits in the 2B PMD
+parameters register.
+
+This object MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] 45.2.1.43""",
+        }, # column
+        "efmCuPme2BMaxDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "192",
+                        "max" : "5696"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "192",
+                        "max" : "5696"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Kbps",
+            "description" :
+                """Maximum Data Rate for the 2BASE-TL PME.
+This object can take values of (n x 64)Kbps,
+where n=3..60 for 16-TCPAM and n=12..89 for 32-TCPAM encoding.
+
+The data rate of the 2BASE-TL PME is considered 'fixed' when
+the value of this object equals that of efmCuPme2BMinDataRate.
+If efmCuPme2BMinDataRate is less than efmCuPme2BMaxDataRate in
+the administrative profile, the data rate is considered
+'adaptive', and SHALL be set to the maximum attainable rate
+not exceeding efmCuPme2BMaxDataRate, under the spectral
+limitations placed by the efmCuPme2BRegion and
+efmCuPme2BsMode.
+
+Note that the current operational data rate of the PME is
+represented by the ifSpeed object of IF-MIB.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object maps to the Max Data Rate1 bits in the 2B PMD
+parameters register.
+
+This object MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] 45.2.1.43""",
+        }, # column
+        "efmCuPme2BPower" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "10",
+                        "max" : "42"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "42"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "0.5 dBm",
+            "description" :
+                """Signal Transmit Power.  Multiple of 0.5 dBm.
+The value of 0 in the administrative profile means that the
+signal transmit power is not fixed and SHALL be set to
+maximize the attainable rate, under the spectral limitations
+placed by the efmCuPme2BRegion and efmCuPme2BsMode.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object maps to the Power1 bits in the 2B PMD parameters
+register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.43""",
+        }, # column
+        "efmCuPme2BConstellation" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "adaptive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "tcpam16" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "tcpam32" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """TCPAM Constellation of the 2BASE-TL PME.
+The possible values are:
+  adaptive(0)    - either 16- or 32-TCPAM
+  tcpam16(1)     - 16-TCPAM
+  tcpam32(2)     - 32-TCPAM
+
+The value of adaptive(0) in the administrative profile means
+that the constellation is not fixed and SHALL be set to
+maximize the attainable rate, under the spectral limitations
+placed by the efmCuPme2BRegion and efmCuPme2BsMode.
+
+If a Clause 45 MDIO Interface to the PME is present, then this
+object maps to the Constellation1 bits in the 2B general
+parameter register.""",
+            "reference" :
+                """[802.3ah] 45.2.1.43""",
+        }, # column
+        "efmCuPme2BProfileRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls the creation, modification, or deletion
+of the associated entry in the efmCuPme2BProfileTable per the
+semantics of RowStatus.
+
+If an 'active' entry is referenced via efmCuAdminProfile or
+efmCuPmeAdminProfile instance(s), the entry MUST remain
+'active'.
+
+An 'active' entry SHALL NOT be modified.  In order to modify
+an existing entry, it MUST be taken out of service (by setting
+this object to 'notInService'), modified, and set 'active'
+again.""",
+        }, # column
+        "efmCuPme2BsModeTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.3",
+            "status" : "current",
+            "description" :
+                """This table, together with efmCu2BReachRateTable, supports
+definition of administrative custom spectral modes for
+2BASE-TL PMEs, describing spectral limitations in addition to
+those specified by efmCuPme2BRegion.
+
+In some countries, spectral regulations (e.g., UK ANFP) limit
+the length of the loops for certain data rates.  This table
+allows these country-specific limitations to be specified.
+
+Entries in this table referenced by the efmCuPme2BsMode
+MUST NOT be deleted until all the active references are
+removed.
+
+This table MUST be maintained in a persistent manner.""",
+            "reference" :
+                """efmCu2BReachRateTable""",
+        }, # table
+        "efmCuPme2BsModeEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "efmCuPme2BsModeIndex",
+            ],
+            "description" :
+                """Each entry specifies a spectral mode description and its
+index, which is used to reference corresponding entries in the
+efmCu2BReachRateTable.
+
+Entries may be created/deleted using the row creation/
+deletion mechanism via efmCuPme2BsModeRowStatus.""",
+        }, # row
+        "efmCuPme2BsModeIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """2BASE-TL PME Spectral Mode index.
+This object is the unique index associated with this spectral
+mode.
+Entries in this table are referenced via the efmCuPme2BsMode
+object.""",
+        }, # column
+        "efmCuPme2BsModeDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """A textual string containing information about a 2BASE-TL PME
+spectral mode.  The string may include information about
+corresponding (country-specific) spectral regulations
+and rate/reach limitations of this particular spectral mode.""",
+        }, # column
+        "efmCuPme2BsModeRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls creation, modification, or deletion of
+the associated entry in efmCuPme2BsModeTable per the semantics
+of RowStatus.
+
+If an 'active' entry is referenced via efmCuPme2BsMode
+instance(s), the entry MUST remain 'active'.
+
+An 'active' entry SHALL NOT be modified.  In order to modify
+an existing entry, it MUST be taken out of service (by setting
+this object to 'notInService'), modified, and set 'active'
+again.""",
+        }, # column
+        "efmCuPme2BReachRateTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.4",
+            "status" : "current",
+            "description" :
+                """This table supports the definition of administrative custom
+spectral modes for 2BASE-TL PMEs, providing spectral
+limitations in addition to those specified by
+efmCuPme2BRegion.
+
+
+
+
+The spectral regulations in some countries (e.g., UK ANFP)
+limit the length of the loops for certain data rates.
+This table allows these country-specific limitations to be
+specified.
+
+Below is an example of this table for [ANFP]:
+----------+-------+-------
+Equivalent MaxRate MaxRate
+  Length    PAM16   PAM32
+    (m)     (Kbps)  (Kbps)
+----------+-------+-------
+    975      2304    5696
+   1125      2304    5504
+   1275      2304    5120
+   1350      2304    4864
+   1425      2304    4544
+   1500      2304    4288
+   1575      2304    3968
+   1650      2304    3776
+   1725      2304    3520
+   1800      2304    3264
+   1875      2304    3072
+   1950      2048    2688
+   2100      1792    2368
+   2250      1536       0
+   2400      1408       0
+   2550      1280       0
+   2775      1152       0
+   2925      1152       0
+   3150      1088       0
+   3375      1024       0
+----------+-------+-------
+
+Entries in this table referenced by an efmCuPme2BsMode
+instance MUST NOT be deleted.
+
+This table MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[ANFP]""",
+        }, # table
+        "efmCuPme2BReachRateEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.4.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "efmCuPme2BsModeIndex",
+                "efmCuPme2BReachRateIndex",
+            ],
+            "description" :
+                """Each entry specifies maximum 2BASE-TL PME data rates
+allowed for a certain equivalent loop length, when using
+
+
+
+16-TCPAM or 32-TCPAM encoding.
+
+When a 2BASE-TL PME is initialized, its data rate MUST NOT
+exceed one of the following limitations:
+- the value of efmCuPme2BMaxDataRate
+- maximum data rate allowed by efmCuPme2BRegion and
+  efmCuPme2BPower
+- maximum data rate for a given encoding specified in the
+  efmCuPme2BsModeEntry, corresponding to the equivalent loop
+  length, estimated by the PME
+
+It is RECOMMENDED that the efmCuPme2BEquivalentLength values
+are assigned in increasing order, starting from the minimum
+value.
+
+Entries may be created/deleted using the row creation/
+deletion mechanism via efmCuPme2ReachRateRowStatus.""",
+        }, # row
+        "efmCuPme2BReachRateIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """2BASE-TL custom spectral mode Reach-Rate table index.
+This object is the unique index associated with each entry.""",
+        }, # column
+        "efmCuPme2BEquivalentLength" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "8192"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "8192"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "m",
+            "description" :
+                """Maximum allowed equivalent loop's physical length in meters
+for the specified data rates.
+An equivalent loop is a hypothetical 26AWG (0.4mm) loop with a
+perfect square root attenuation characteristic, without any
+
+
+
+bridged taps.""",
+        }, # column
+        "efmCuPme2BMaxDataRatePam16" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "192",
+                        "max" : "5696"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5696"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Kbps",
+            "description" :
+                """Maximum data rate for a 2BASE-TL PME at the specified
+equivalent loop's length using TC-PAM16 encoding.
+The value of zero means that TC-PAM16 encoding should not be
+used at this distance.""",
+        }, # column
+        "efmCuPme2BMaxDataRatePam32" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "192",
+                        "max" : "5696"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5696"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Kbps",
+            "description" :
+                """Maximum data rate for a 2BASE-TL PME at the specified
+equivalent loop's length using TC-PAM32 encoding.
+The value of zero means that TC-PAM32 encoding should not be
+used at this distance.""",
+        }, # column
+        "efmCuPme2BReachRateRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.5.4.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls the creation, modification, or deletion
+of the associated entry in the efmCuPme2BReachRateTable per
+the semantics of RowStatus.
+
+If an 'active' entry is referenced via efmCuPme2BsMode
+instance(s), the entry MUST remain 'active'.
+
+An 'active' entry SHALL NOT be modified.  In order to modify
+an existing entry, it MUST be taken out of service (by setting
+this object to 'notInService'), modified, and set 'active'
+again.""",
+        }, # column
+        "efmCuPme10P" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6",
+        }, # node
+        "efmCuPme10PProfileTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1",
+            "status" : "current",
+            "description" :
+                """This table supports definitions of configuration profiles for
+10PASS-TS PMEs.
+The first 22 entries in this table SHALL always be defined as
+follows (see 802.3ah Annex 62B.3, table 62B-1):
+-------+--------+----+---------+-----+-----+---------------
+Profile Bandplan UPBO BandNotch DRate URate Comment
+ Index  PSDMask#  p#    p#        p#    p#
+-------+--------+----+---------+-----+-----+---------------
+   1      1      3    2,6,10,11    20    20 default profile
+   2     13      5    0            20    20
+   3      1      1    0            20    20
+   4     16      0    0           100   100
+   5     16      0    0            70    50
+   6      6      0    0            50    10
+   7     17      0    0            30    30
+   8      8      0    0            30     5
+   9      4      0    0            25    25
+  10      4      0    0            15    15
+  11     23      0    0            10    10
+  12     23      0    0             5     5
+  13     16      0    2,5,9,11    100   100
+  14     16      0    2,5,9,11     70    50
+  15      6      0    2,6,10,11    50    10
+  16     17      0    2,5,9,11     30    30
+  17      8      0    2,6,10,11    30     5
+  18      4      0    2,6,10,11    25    25
+  19      4      0    2,6,10,11    15    15
+  20     23      0    2,5,9,11     10    10
+  21     23      0    2,5,9,11      5     5
+  22     30      0    0           200    50
+-------+--------+----+---------+-----+-----+---------------
+
+These default entries SHALL be created during agent
+initialization and MUST NOT be deleted.
+
+Entries following the first 22 can be dynamically created and
+deleted to provide custom administrative (configuration)
+profiles and automatic operating profiles.
+
+This table MUST be maintained in a persistent manner.""",
+            "reference" :
+                """[802.3ah] Annex 62B.3, 30.11.2.1.6""",
+        }, # table
+        "efmCuPme10PProfileEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "efmCuPme10PProfileIndex",
+            ],
+            "description" :
+                """Each entry corresponds to a single 10PASS-TS PME profile.
+
+Each profile contains a set of parameters, used either for
+configuration or representation of a 10PASS-TS PME.
+In case a particular profile is referenced via the
+efmCuPmeAdminProfile object (or efmCuAdminProfile if
+efmCuPmeAdminProfile is zero), it represents the desired
+parameters for the 10PassTS-O PME initialization.
+If a profile is referenced via an efmCuPmeOperProfile object,
+it represents the current operating parameters of the PME.
+
+Profiles may be created/deleted using the row creation/
+deletion mechanism via efmCuPme10PProfileRowStatus.  If an
+'active' entry is referenced, the entry MUST remain 'active'
+until all references are removed.
+Default entries MUST NOT be removed.""",
+        }, # row
+        "efmCuPme10PProfileIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"EFM-CU-MIB", "name" : "EfmProfileIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """10PASS-TS PME profile index.
+This object is the unique index associated with this profile.
+Entries in this table are referenced via efmCuAdminProfile or
+efmCuPmeAdminProfile.""",
+        }, # column
+        "efmCuPme10PProfileDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """A textual string containing information about a 10PASS-TS PME
+profile.  The string may include information about data rate
+and spectral limitations of this particular profile.""",
+        }, # column
+        "efmCuPme10PBandplanPSDMskProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "profile1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "profile2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "profile3" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "profile4" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "profile5" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "profile6" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "profile7" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "profile8" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "profile9" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "profile10" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "profile11" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                    "profile12" : {
+                        "nodetype" : "namednumber",
+                        "number" : "12"
+                    },
+                    "profile13" : {
+                        "nodetype" : "namednumber",
+                        "number" : "13"
+                    },
+                    "profile14" : {
+                        "nodetype" : "namednumber",
+                        "number" : "14"
+                    },
+                    "profile15" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                    "profile16" : {
+                        "nodetype" : "namednumber",
+                        "number" : "16"
+                    },
+                    "profile17" : {
+                        "nodetype" : "namednumber",
+                        "number" : "17"
+                    },
+                    "profile18" : {
+                        "nodetype" : "namednumber",
+                        "number" : "18"
+                    },
+                    "profile19" : {
+                        "nodetype" : "namednumber",
+                        "number" : "19"
+                    },
+                    "profile20" : {
+                        "nodetype" : "namednumber",
+                        "number" : "20"
+                    },
+                    "profile21" : {
+                        "nodetype" : "namednumber",
+                        "number" : "21"
+                    },
+                    "profile22" : {
+                        "nodetype" : "namednumber",
+                        "number" : "22"
+                    },
+                    "profile23" : {
+                        "nodetype" : "namednumber",
+                        "number" : "23"
+                    },
+                    "profile24" : {
+                        "nodetype" : "namednumber",
+                        "number" : "24"
+                    },
+                    "profile25" : {
+                        "nodetype" : "namednumber",
+                        "number" : "25"
+                    },
+                    "profile26" : {
+                        "nodetype" : "namednumber",
+                        "number" : "26"
+                    },
+                    "profile27" : {
+                        "nodetype" : "namednumber",
+                        "number" : "27"
+                    },
+                    "profile28" : {
+                        "nodetype" : "namednumber",
+                        "number" : "28"
+                    },
+                    "profile29" : {
+                        "nodetype" : "namednumber",
+                        "number" : "29"
+                    },
+                    "profile30" : {
+                        "nodetype" : "namednumber",
+                        "number" : "30"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The 10PASS-TS PME Bandplan and PSD Mask Profile, as specified
+in 802.3ah Annex 62A, table 62A-1.  Possible values are:
+--------------+------------------------+------------+--------
+Profile Name    PSD Mask                  Bands      G.993.1
+                                        0/1/2/3/4/5  Bandplan
+--------------+------------------------+------------+--------
+profile1(1)    T1.424 FTTCab.M1         x/D/U/D/U    A
+profile2(2)    T1.424 FTTEx.M1          x/D/U/D/U    A
+profile3(3)    T1.424 FTTCab.M2         x/D/U/D/U    A
+profile4(4)    T1.424 FTTEx.M2          x/D/U/D/U    A
+profile5(5)    T1.424 FTTCab.M1         D/D/U/D/U    A
+profile6(6)    T1.424 FTTEx.M1          D/D/U/D/U    A
+profile7(7)    T1.424 FTTCab.M2         D/D/U/D/U    A
+profile8(8)    T1.424 FTTEx.M2          D/D/U/D/U    A
+profile9(9)    T1.424 FTTCab.M1         U/D/U/D/x    A
+profile10(10)  T1.424 FTTEx.M1          U/D/U/D/x    A
+profile11(11)  T1.424 FTTCab.M2         U/D/U/D/x    A
+profile12(12)  T1.424 FTTEx.M2          U/D/U/D/x    A
+profile13(13)  TS 101 270-1 Pcab.M1.A   x/D/U/D/U    B
+profile14(14)  TS 101 270-1 Pcab.M1.B   x/D/U/D/U    B
+profile15(15)  TS 101 270-1 Pex.P1.M1   x/D/U/D/U    B
+profile16(16)  TS 101 270-1 Pex.P2.M1   x/D/U/D/U    B
+profile17(17)  TS 101 270-1 Pcab.M2     x/D/U/D/U    B
+profile18(18)  TS 101 270-1 Pex.P1.M2   x/D/U/D/U    B
+profile19(19)  TS 101 270-1 Pex.P2.M2   x/D/U/D/U    B
+profile20(20)  TS 101 270-1 Pcab.M1.A   U/D/U/D/x    B
+profile21(21)  TS 101 270-1 Pcab.M1.B   U/D/U/D/x    B
+profile22(22)  TS 101 270-1 Pex.P1.M1   U/D/U/D/x    B
+profile23(23)  TS 101 270-1 Pex.P2.M1   U/D/U/D/x    B
+profile24(24)  TS 101 270-1 Pcab.M2     U/D/U/D/x    B
+profile25(25)  TS 101 270-1 Pex.P1.M2   U/D/U/D/x    B
+profile26(26)  TS 101 270-1 Pex.P2.M2   U/D/U/D/x    B
+profile27(27)  G.993.1 F.1.2.1          x/D/U/D/U    Annex F
+profile28(28)  G.993.1 F.1.2.2          x/D/U/D/U    Annex F
+profile29(29)  G.993.1 F.1.2.3          x/D/U/D/U    Annex F
+profile30(30)  T1.424 FTTCab.M1 (ext.)  x/D/U/D/U/D  Annex A
+--------------+------------------------+------------+--------""",
+            "reference" :
+                """[802.3ah] Annex 62A""",
+        }, # column
+        "efmCuPme10PUPBOReferenceProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "profile0" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "profile1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "profile2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "profile3" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "profile4" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "profile5" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "profile6" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "profile7" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "profile8" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "profile9" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The 10PASS-TS PME Upstream Power Back-Off (UPBO) Reference
+PSD Profile, as specified in 802.3 Annex 62A, table 62A-3.
+Possible values are:
+------------+-----------------------------
+Profile Name   Reference PSD
+------------+-----------------------------
+profile0(0)  no profile
+profile1(1)  T1.424        Noise A    M1
+profile2(2)  T1.424        Noise A    M2
+profile3(3)  T1.424        Noise F    M1
+profile4(4)  T1.424        Noise F    M2
+profile5(5)  TS 101 270-1  Noise A&B
+profile6(6)  TS 101 270-1  Noise C
+profile7(7)  TS 101 270-1  Noise D
+profile8(8)  TS 101 270-1  Noise E
+profile9(9)  TS 101 270-1  Noise F
+------------+-----------------------------""",
+            "reference" :
+                """[802.3ah] Annex 62A.3.5""",
+        }, # column
+        "efmCuPme10PBandNotchProfiles" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "profile0" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "profile1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "profile2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "profile3" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "profile4" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "profile5" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "profile6" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "profile7" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "profile8" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "profile9" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "profile10" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "profile11" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The 10PASS-TS PME Egress Control Band Notch Profile bitmap,
+as specified in 802.3 Annex 62A, table 62A-4.  Possible values
+are:
+--------------+--------+------+------------+------+------
+Profile Name   G.991.3  T1.424 TS 101 270-1 StartF EndF
+               table    table  table        (MHz)  (MHz)
+--------------+--------+------+------------+------+------
+profile0(0)    no profile
+profile1(1)    F-5 #01  -      -            1.810  1.825
+profile2(2)    6-2      15-1   17           1.810  2.000
+profile3(3)    F-5 #02  -      -            1.907  1.912
+profile4(4)    F-5 #03  -      -            3.500  3.575
+profile5(5)    6-2      -      17           3.500  3.800
+profile6(6)    -        15-1   -            3.500  4.000
+profile7(7)    F-5 #04  -      -            3.747  3.754
+profile8(8)    F-5 #05  -      -            3.791  3.805
+profile9(9)    6-2      -      17           7.000  7.100
+profile10(10)  F-5 #06  15-1   -            7.000  7.300
+profile11(11)  6-2      15-1   1            10.100 10.150
+--------------+--------+------+------------+------+------
+
+Any combination of profiles can be specified by ORing
+individual profiles, for example, a value of 0x2230 selects
+profiles 2, 6, 10, and 11.""",
+            "reference" :
+                """[802.3ah] Annex 62A.3.5""",
+        }, # column
+        "efmCuPme10PPayloadDRateProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "profile5" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "profile10" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "profile15" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                    "profile20" : {
+                        "nodetype" : "namednumber",
+                        "number" : "20"
+                    },
+                    "profile25" : {
+                        "nodetype" : "namednumber",
+                        "number" : "25"
+                    },
+                    "profile30" : {
+                        "nodetype" : "namednumber",
+                        "number" : "30"
+                    },
+                    "profile50" : {
+                        "nodetype" : "namednumber",
+                        "number" : "50"
+                    },
+                    "profile70" : {
+                        "nodetype" : "namednumber",
+                        "number" : "70"
+                    },
+                    "profile100" : {
+                        "nodetype" : "namednumber",
+                        "number" : "100"
+                    },
+                    "profile140" : {
+                        "nodetype" : "namednumber",
+                        "number" : "140"
+                    },
+                    "profile200" : {
+                        "nodetype" : "namednumber",
+                        "number" : "200"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The 10PASS-TS PME Downstream Payload Rate Profile, as
+
+
+
+specified in 802.3 Annex 62A.  Possible values are:
+  profile5(5)      - 2.5 Mbps
+  profile10(10)    - 5 Mbps
+  profile15(15)    - 7.5 Mbps
+  profile20(20)    - 10 Mbps
+  profile25(25)    - 12.5 Mbps
+  profile30(30)    - 15 Mbps
+  profile50(50)    - 25 Mbps
+  profile70(70)    - 35 Mbps
+  profile100(100)  - 50 Mbps
+  profile140(140)  - 70 Mbps
+  profile200(200)  - 100 Mbps
+
+Each value represents a target for the PME's Downstream
+Payload Bitrate as seen at the MII.  If the payload rate of
+the selected profile cannot be achieved based on the loop
+environment, bandplan, and PSD mask, the PME initialization
+SHALL fail.""",
+            "reference" :
+                """[802.3ah] Annex 62A.3.6""",
+        }, # column
+        "efmCuPme10PPayloadURateProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "profile5" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "profile10" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "profile15" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                    "profile20" : {
+                        "nodetype" : "namednumber",
+                        "number" : "20"
+                    },
+                    "profile25" : {
+                        "nodetype" : "namednumber",
+                        "number" : "25"
+                    },
+                    "profile30" : {
+                        "nodetype" : "namednumber",
+                        "number" : "30"
+                    },
+                    "profile50" : {
+                        "nodetype" : "namednumber",
+                        "number" : "50"
+                    },
+                    "profile70" : {
+                        "nodetype" : "namednumber",
+                        "number" : "70"
+                    },
+                    "profile100" : {
+                        "nodetype" : "namednumber",
+                        "number" : "100"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The 10PASS-TS PME Upstream Payload Rate Profile, as specified
+in 802.3 Annex 62A.  Possible values are:
+ profile5(5)       - 2.5 Mbps
+ profile10(10)     - 5 Mbps
+ profile15(15)     - 7.5 Mbps
+ profile20(20)     - 10 Mbps
+ profile25(25)     - 12.5 Mbps
+ profile30(30)     - 15 Mbps
+ profile50(50)     - 25 Mbps
+ profile70(70)     - 35 Mbps
+ profile100(100)   - 50 Mbps
+
+
+
+Each value represents a target for the PME's Upstream Payload
+Bitrate as seen at the MII.  If the payload rate of the
+selected profile cannot be achieved based on the loop
+environment, bandplan, and PSD mask, the PME initialization
+SHALL fail.""",
+            "reference" :
+                """[802.3ah] Annex 62A.3.6""",
+        }, # column
+        "efmCuPme10PProfileRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls creation, modification, or deletion of
+the associated entry in efmCuPme10PProfileTable per the
+semantics of RowStatus.
+
+If an active entry is referenced via efmCuAdminProfile or
+efmCuPmeAdminProfile, the entry MUST remain 'active' until
+all references are removed.
+
+An 'active' entry SHALL NOT be modified.  In order to modify
+an existing entry, it MUST be taken out of service (by setting
+this object to 'notInService'), modified, and set 'active'
+again.""",
+        }, # column
+        "efmCuPme10PStatusTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.2",
+            "status" : "current",
+            "description" :
+                """This table provides status information of EFMCu 10PASS-TS
+PMEs (modems).
+
+This table contains live data from the equipment.  As such,
+it is NOT persistent.""",
+        }, # table
+        "efmCuPme10PStatusEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the EFMCu 10PASS-TS PME Status table.""",
+        }, # row
+        "efmCuPme10PFECCorrectedBlocks" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of received and corrected Forward Error Correction
+(FEC) codewords in this 10PASS-TS PME.
+
+This object maps to the aPMEFECCorrectedBlocks attribute in
+Clause 30.
+
+If a Clause 45 MDIO Interface to the PMA/PMD is present,
+then this object maps to the 10P FEC correctable errors
+register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.1.22, 30.11.2.1.8""",
+        }, # column
+        "efmCuPme10PFECUncorrectedBlocks" : {
+            "nodetype" : "column",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.6.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of received uncorrectable FEC codewords in this
+10PASS-TS PME.
+
+This object maps to the aPMEFECUncorrectableBlocks attribute
+in Clause 30.
+
+If a Clause 45 MDIO Interface to the PMA/PMD is present,
+then this object maps to the 10P FEC uncorrectable errors
+register.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other times
+
+
+
+as indicated by the value of ifCounterDiscontinuityTime,
+defined in IF-MIB.""",
+            "reference" :
+                """[802.3ah] 45.2.1.23, 30.11.2.1.9""",
+        }, # column
+        "efmCuConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2",
+        }, # node
+        "efmCuGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1",
+        }, # node
+        "efmCuCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "efmCuLowRateCrossing" : {
+            "nodetype" : "notification",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.1.0.1",
+            "status" : "current",
+            "objects" : {
+                "ifSpeed" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "efmCuThreshLowRate" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the EFMCu port's data rate
+has reached/dropped below or exceeded the low rate threshold,
+specified by efmCuThreshLowRate.
+
+This notification MAY be sent for the -O subtype ports
+(2BaseTL-O/10PassTS-O) while the port is Up, on the crossing
+event in both directions: from normal (rate is above the
+threshold) to low (rate equals the threshold or below it) and
+
+
+
+from low to normal.  This notification is not applicable to
+the -R subtypes.
+
+It is RECOMMENDED that a small debouncing period of 2.5 sec,
+between the detection of the condition and the notification,
+is implemented to prevent simultaneous LinkUp/LinkDown and
+efmCuLowRateCrossing notifications to be sent.
+
+The adaptive nature of the EFMCu technology allows the port to
+adapt itself to the changes in the copper environment, e.g.,
+an impulse noise, alien crosstalk, or a micro-interruption may
+temporarily drop one or more PMEs in the aggregation group,
+causing a rate degradation of the aggregated EFMCu link.
+The dropped PMEs would then try to re-initialize, possibly at
+a lower rate than before, adjusting the rate to provide
+required target SNR margin.
+
+Generation of this notification is controlled by the
+efmCuLowRateCrossingEnable object.""",
+        }, # notification
+        "efmCuPmeLineAtnCrossing" : {
+            "nodetype" : "notification",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.0.1",
+            "status" : "current",
+            "objects" : {
+                "efmCuPmeLineAtn" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeThreshLineAtn" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the loop attenuation
+threshold (as per the efmCuPmeThreshLineAtn
+value) has been reached/exceeded for the 2BASE-TL/10PASS-TS
+PME.  This notification MAY be sent on the crossing event in
+both directions: from normal to exceeded and from exceeded
+to normal.
+
+It is RECOMMENDED that a small debouncing period of 2.5 sec,
+between the detection of the condition and the notification,
+is implemented to prevent intermittent notifications from
+being sent.
+
+Generation of this notification is controlled by the
+efmCuPmeLineAtnCrossingEnable object.""",
+        }, # notification
+        "efmCuPmeSnrMgnCrossing" : {
+            "nodetype" : "notification",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.0.2",
+            "status" : "current",
+            "objects" : {
+                "efmCuPmeSnrMgn" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeThreshSnrMgn" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the SNR margin threshold
+(as per the efmCuPmeThreshSnrMgn value) has been
+reached/exceeded for the 2BASE-TL/10PASS-TS PME.
+This notification MAY be sent on the crossing event in
+both directions: from normal to exceeded and from exceeded
+to normal.
+
+It is RECOMMENDED that a small debouncing period of 2.5 sec,
+between the detection of the condition and the notification,
+is implemented to prevent intermittent notifications from
+being sent.
+
+Generation of this notification is controlled by the
+efmCuPmeSnrMgnCrossingEnable object.""",
+        }, # notification
+        "efmCuPmeDeviceFault" : {
+            "nodetype" : "notification",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.0.3",
+            "status" : "current",
+            "objects" : {
+                "efmCuPmeFltStatus" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that a fault in the PME has been
+detected by a vendor-specific diagnostic or a self-test.
+
+Generation of this notification is controlled by the
+efmCuPmeDeviceFaultEnable object.""",
+        }, # notification
+        "efmCuPmeConfigInitFailure" : {
+            "nodetype" : "notification",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.0.4",
+            "status" : "current",
+            "objects" : {
+                "efmCuPmeFltStatus" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuAdminProfile" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeAdminProfile" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that PME initialization has
+failed, due to inability of the PME link to achieve the
+
+
+
+requested configuration profile.
+
+Generation of this notification is controlled by the
+efmCuPmeConfigInitFailEnable object.""",
+        }, # notification
+        "efmCuPmeProtocolInitFailure" : {
+            "nodetype" : "notification",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.1.2.0.5",
+            "status" : "current",
+            "objects" : {
+                "efmCuPmeFltStatus" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeOperSubType" : {
+                    "nodetype" : "object",
+                    "module" : "EFM-CU-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the peer PME was using
+an incompatible protocol during initialization.
+
+Generation of this notification is controlled by the
+efmCuPmeProtocolInitFailEnable object.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "efmCuBasicGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.1",
+            "status" : "current",
+            "members" : {
+                "efmCuPAFSupported" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuAdminProfile" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuTargetDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuTargetSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuAdaptiveSpectra" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPortSide" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuFltStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects representing management information
+common for all types of EFMCu ports.""",
+        }, # group
+        "efmCuPAFGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.2",
+            "status" : "current",
+            "members" : {
+                "efmCuPeerPAFSupported" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPeerPAFCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFAdminState" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFDiscoveryCode" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFRemoteDiscoveryCode" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuNumPMEs" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects supporting OPTIONAL PME
+Aggregation Function (PAF) and PAF discovery in EFMCu ports.""",
+        }, # group
+        "efmCuPAFErrorsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.3",
+            "status" : "current",
+            "members" : {
+                "efmCuPAFInErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFInSmallFragments" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFInLargeFragments" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFInBadFragments" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFInLostFragments" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFInLostStarts" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFInLostEnds" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFInOverflows" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects supporting OPTIONAL error counters
+of PAF on EFMCu ports.""",
+        }, # group
+        "efmCuPmeGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.4",
+            "status" : "current",
+            "members" : {
+                "efmCuPmeAdminProfile" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeFltStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeSubTypesSupported" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeAdminSubType" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeOperSubType" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPAFRemoteDiscoveryCode" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeOperProfile" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmePeerSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeLineAtn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmePeerLineAtn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeEquivalentLength" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeTCCodingErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeTCCrcErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeThreshLineAtn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeThreshSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information about
+a 2BASE-TL/10PASS-TS PME.""",
+        }, # group
+        "efmCuAlarmConfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.5",
+            "status" : "current",
+            "members" : {
+                "efmCuThreshLowRate" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuLowRateCrossingEnable" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeThreshLineAtn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeLineAtnCrossingEnable" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeThreshSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeSnrMgnCrossingEnable" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeDeviceFaultEnable" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeConfigInitFailEnable" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeProtocolInitFailEnable" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects supporting configuration of alarm
+thresholds and notifications in EFMCu ports.""",
+        }, # group
+        "efmCuNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.6",
+            "status" : "current",
+            "members" : {
+                "efmCuLowRateCrossing" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeLineAtnCrossing" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeSnrMgnCrossing" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeDeviceFault" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeConfigInitFailure" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeProtocolInitFailure" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports notifications of significant conditions
+associated with EFMCu ports.""",
+        }, # group
+        "efmCuPme2BProfileGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.7",
+            "status" : "current",
+            "members" : {
+                "efmCuPme2BProfileDescr" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BRegion" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BsMode" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BMinDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BMaxDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BPower" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BConstellation" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BProfileRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BsModeDescr" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BsModeRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BEquivalentLength" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BMaxDataRatePam16" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BMaxDataRatePam32" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BReachRateRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects that constitute a configuration
+
+
+
+profile for configuration of 2BASE-TL ports.""",
+        }, # group
+        "efmCuPme10PProfileGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.8",
+            "status" : "current",
+            "members" : {
+                "efmCuPme10PProfileDescr" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme10PBandplanPSDMskProfile" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme10PUPBOReferenceProfile" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme10PBandNotchProfiles" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme10PPayloadDRateProfile" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme10PPayloadURateProfile" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme10PProfileRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects that constitute a configuration
+profile for configuration of 10PASS-TS ports.""",
+        }, # group
+        "efmCuPme10PStatusGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.1.9",
+            "status" : "current",
+            "members" : {
+                "efmCuPme10PFECCorrectedBlocks" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme10PFECUncorrectedBlocks" : {
+                    "nodetype" : "member",
+                    "module" : "EFM-CU-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing status information
+specific to 10PASS-TS PMEs.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "efmCuCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "EFM-CU-MIB",
+            "oid" : "1.3.6.1.2.1.167.2.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for 2BASE-TL/10PASS-TS interfaces.
+Compliance with the following external compliance statements
+is REQUIRED:
+
+MIB Module             Compliance Statement
+----------             --------------------
+IF-MIB                 ifCompliance3
+EtherLike-MIB          dot3Compliance2
+MAU-MIB                mauModIfCompl3
+
+Compliance with the following external compliance statements
+is OPTIONAL for implementations supporting PME Aggregation
+Function (PAF) with flexible cross-connect between the PCS
+
+
+
+and PME ports:
+
+MIB Module             Compliance Statement
+----------             --------------------
+IF-INVERTED-STACK-MIB  ifInvCompliance
+IF-CAP-STACK-MIB       ifCapStackCompliance""",
+            "requires" : {
+                "efmCuBasicGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPmeGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuAlarmConfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EFM-CU-MIB"
+                },
+                "efmCuPme2BProfileGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EFM-CU-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting 2BASE-TL PHY.""",
+                },
+                "efmCuPme10PProfileGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EFM-CU-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting 10PASS-TS PHY.""",
+                },
+                "efmCuPAFGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EFM-CU-MIB",
+                    "description" :
+                        """Support for this group is only required for
+implementations supporting PME Aggregation Function (PAF).""",
+                },
+                "efmCuPAFErrorsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EFM-CU-MIB",
+                    "description" :
+                        """Support for this group is OPTIONAL for implementations
+supporting PME Aggregation Function (PAF).""",
+                },
+                "efmCuPme10PStatusGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EFM-CU-MIB",
+                    "description" :
+                        """Support for this group is OPTIONAL for implementations
+supporting 10PASS-TS PHY.""",
+                },
+            }, # requires
+            "refinements" : {
+                "efmCuPmeSubTypesSupported" : {
+                    "module" : "EFM-CU-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Bits",
+                            "ieee2BaseTLO" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ieee2BaseTLR" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ieee10PassTSO" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "ieee10PassTSR" : {
+                                "nodetype" : "namednumber",
+                                "number" : "3"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Support for all subtypes is not required.  However, at
+least one value SHALL be supported.""",
+                },
+                "efmCuPmeAdminSubType" : {
+                    "module" : "EFM-CU-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required (needed only for PMEs
+supporting more than a single subtype, e.g.,
+ieee2BaseTLO and ieee2BaseTLR or ieee10PassTSO and
+ieee10PassTSR).""",
+                },
+                "efmCuTargetSnrMgn" : {
+                    "module" : "EFM-CU-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is OPTIONAL.  For PHYs without write access,
+the target SNR margin SHALL be fixed at 5dB for 2BASE-TL
+and 6dB for 10PASS-TS.""",
+                },
+                "efmCuAdaptiveSpectra" : {
+                    "module" : "EFM-CU-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is OPTIONAL.  For PHYs without write access,
+the default value SHOULD be false.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}