logstash-integration-snmp 4.0.0-java

data/lib/mibs/ietf/BFD-TC-STD-MIB.dic

@@ -0,0 +1,202 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python BFD-TC-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/BFD-TC-STD-MIB"
+
+MIB = {
+    "moduleName" : "BFD-TC-STD-MIB",
+
+    "BFD-TC-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Bidirectional Forwarding Detection
+Working Group""",
+        "contact" : 
+            """Thomas D. Nadeau
+Brocade
+Email:  tnadeau@lucidvision.com
+
+Zafar Ali
+Cisco Systems, Inc.
+Email:  zali@cisco.com
+
+Nobo Akiya
+Cisco Systems, Inc.
+Email:  nobo@cisco.com
+
+Comments about this document should be emailed directly
+to the BFD working group mailing list at
+rtg-bfd@ietf.org""",
+        "description" :
+            """Copyright (c) 2014 IETF Trust and the persons identified as
+authors of the code.  All rights reserved.
+
+Redistribution and use in source and binary forms, with or
+without modification, is permitted pursuant to, and subject
+
+
+
+to the license terms contained in, the Simplified BSD License
+set forth in Section 4.c of the IETF Trust's Legal Provisions
+Relating to IETF Documents
+(http://trustee.ietf.org/license-info).""",
+        "revisions" : (
+            {
+                "date" : "2014-08-12 00:00",
+                "description" :
+                    """Initial version.  Published as RFC 7330.""",
+            },
+        ),
+        "identity node" : "bfdTCStdMib",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+    ),
+
+    "typedefs" : {
+        "BfdSessIndexTC" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            "format" : "d",
+            "description" :
+                """An index used to uniquely identify BFD sessions.""",
+        },
+        "BfdIntervalTC" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "format" : "d",
+            "description" :
+                """The BFD interval in microseconds.""",
+        },
+        "BfdMultiplierTC" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "255"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "255"
+            },
+            "format" : "d",
+            "description" :
+                """The BFD failure detection multiplier.""",
+        },
+        "BfdCtrlDestPortNumberTC" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "65535"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "65535"
+            },
+            "format" : "d",
+            "description" :
+                """UDP destination port number of BFD control packets.
+3784 represents single-hop BFD session.
+4784 represents multi-hop BFD session.
+6784 represents BFD on Link Aggregation Group (LAG) session.
+
+However, syntax is left open to wider range of values
+purposely for two reasons:
+1. Implementation uses non-compliant port number for
+   valid proprietary reason.
+2. Potential future extension documents.
+
+
+
+
+
+The value of 0 is a special, reserved value used
+to indicate special conditions and should not be considered
+a valid port number.""",
+            "reference" :
+                """Use of port 3784 from Katz, D. and D. Ward,
+Bidirectional Forwarding Detection (BFD) for
+IPv4 and IPv6 (Single Hop), RFC 5881, June 2010.
+
+Use of port 4784 from Katz, D. and D. Ward,
+Bidirectional Forwarding Detection (BFD) for
+Multihop Paths, RFC 5883, June 2010.
+
+Use of port 6784 from Bhatia, M., Chen, M., Boutros, S.,
+Binderberger, M., and J. Haas, Bidirectional Forwarding
+Detection (BFD) on Link Aggregation Group (LAG)
+Interfaces, RFC 7130, February 2014.""",
+        },
+        "BfdCtrlSourcePortNumberTC" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "65535"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "65535"
+            },
+            "format" : "d",
+            "description" :
+                """UDP source port number of BFD control packets.
+However, syntax is left open to wider range of values
+purposely for two reasons:
+1. Implementation uses non-compliant port number for
+   valid proprietary reason.
+2. Potential future extension documents.
+
+The value of 0 is a special, reserved value used
+to indicate special conditions and should not be considered
+a valid port number.""",
+            "reference" :
+                """Port 49152..65535 from RFC5881""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "bfdTCStdMib" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-TC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.223",
+            "status" : "current",
+        }, # node
+    }, # nodes
+
+}