logstash-integration-snmp 4.0.0-java

data/lib/mibs/ietf/RS-232-MIB.dic

@@ -0,0 +1,1335 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python RS-232-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/RS-232-MIB"
+
+MIB = {
+    "moduleName" : "RS-232-MIB",
+
+    "RS-232-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Character MIB Working Group""",
+        "contact" : 
+            """        Bob Stewart
+Postal: Xyplex, Inc.
+        295 Foster Street
+        Littleton, MA 01460
+
+   Tel: 508-952-4816
+   Fax: 508-952-4887
+E-mail: rlstewart@eng.xyplex.com""",
+        "description" :
+            """The MIB module for RS-232-like hardware devices.""",
+        "revisions" : (
+            {
+                "date" : "1994-05-26 17:00",
+                "description" :
+                    """[Revision added by libsmi due to a LAST-UPDATED clause.]""",
+            },
+        ),
+        "identity node" : "rs232",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndex"},
+        {"module" : "RFC1213-MIB", "name" : "transmission"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+    ),
+
+    "nodes" : {
+        "rs232" : {
+            "nodetype" : "node",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33",
+            "status" : "current",
+        }, # node
+        "rs232Number" : {
+            "nodetype" : "scalar",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of ports (regardless of their current
+state) in the RS-232-like general port table.""",
+        }, # scalar
+        "rs232PortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2",
+            "status" : "current",
+            "description" :
+                """A list of port entries.  The number of entries is
+given by the value of rs232Number.""",
+        }, # table
+        "rs232PortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1",
+            "status" : "current",
+            "linkage" : [
+                "rs232PortIndex",
+            ],
+            "description" :
+                """Status and parameter values for a port.""",
+        }, # row
+        "rs232PortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of ifIndex for the port.  By convention
+and if possible, hardware port numbers map directly
+to external connectors.  The value for each port must
+remain constant at least from one re-initialization
+of the network management agent to the next.""",
+        }, # column
+        "rs232PortType" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "rs232" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "rs422" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "rs423" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "v35" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "x21" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The port's hardware type.""",
+        }, # column
+        "rs232PortInSigNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of input signals for the port in the
+input signal table (rs232PortInSigTable).  The table
+contains entries only for those signals the software
+can detect and that are useful to observe.""",
+        }, # column
+        "rs232PortOutSigNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of output signals for the port in the
+output signal table (rs232PortOutSigTable).  The
+table contains entries only for those signals the
+software can assert and that are useful to observe.""",
+        }, # column
+        "rs232PortInSpeed" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The port's input speed in bits per second.  Note that
+non-standard values, such as 9612, are probably not allowed
+on most implementations.""",
+        }, # column
+        "rs232PortOutSpeed" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The port's output speed in bits per second.  Note that
+non-standard values, such as 9612, are probably not allowed
+on most implementations.""",
+        }, # column
+        "rs232PortInFlowType" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ctsRts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dsrDtr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The port's type of input flow control.  'none'
+indicates no flow control at this level.
+'ctsRts' and 'dsrDtr' indicate use of the indicated
+hardware signals.""",
+        }, # column
+        "rs232PortOutFlowType" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ctsRts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dsrDtr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The port's type of output flow control.  'none'
+indicates no flow control at this level.
+'ctsRts' and 'dsrDtr' indicate use of the indicated
+hardware signals.""",
+        }, # column
+        "rs232AsyncPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3",
+            "status" : "current",
+            "description" :
+                """A list of asynchronous port entries.  Entries need
+not exist for synchronous ports.""",
+        }, # table
+        "rs232AsyncPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1",
+            "status" : "current",
+            "linkage" : [
+                "rs232AsyncPortIndex",
+            ],
+            "description" :
+                """Status and parameter values for an asynchronous
+port.""",
+        }, # row
+        "rs232AsyncPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A unique value for each port.  Its value is the
+same as rs232PortIndex for the port.""",
+        }, # column
+        "rs232AsyncPortBits" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "5",
+                        "max" : "8"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "5",
+                        "max" : "8"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The port's number of bits in a character.""",
+        }, # column
+        "rs232AsyncPortStopBits" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "one" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "two" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "oneAndHalf" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "dynamic" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The port's number of stop bits.""",
+        }, # column
+        "rs232AsyncPortParity" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "odd" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "even" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "mark" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "space" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The port's sense of a character parity bit.""",
+        }, # column
+        "rs232AsyncPortAutobaud" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """A control for the port's ability to automatically
+sense input speed.
+
+When rs232PortAutoBaud is 'enabled', a port may
+autobaud to values different from the set values for
+speed, parity, and character size.  As a result a
+network management system may temporarily observe
+values different from what was previously set.""",
+        }, # column
+        "rs232AsyncPortParityErrs" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of characters with a parity error,
+input from the port since system re-initialization
+and while the port state was 'up' or 'test'.""",
+        }, # column
+        "rs232AsyncPortFramingErrs" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of characters with a framing error,
+input from the port since system re-initialization
+and while the port state was 'up' or 'test'.""",
+        }, # column
+        "rs232AsyncPortOverrunErrs" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of characters with an overrun error,
+input from the port since system re-initialization
+and while the port state was 'up' or 'test'.""",
+        }, # column
+        "rs232SyncPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4",
+            "status" : "current",
+            "description" :
+                """A list of asynchronous port entries.  Entries need
+not exist for synchronous ports.""",
+        }, # table
+        "rs232SyncPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1",
+            "status" : "current",
+            "linkage" : [
+                "rs232SyncPortIndex",
+            ],
+            "description" :
+                """Status and parameter values for a synchronous
+port.""",
+        }, # row
+        "rs232SyncPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A unique value for each port.  Its value is the
+same as rs232PortIndex for the port.""",
+        }, # column
+        "rs232SyncPortClockSource" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "internal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "external" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "split" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Source of the port's bit rate clock. 'split' means
+the tranmit clock is internal and the receive clock
+is external.""",
+        }, # column
+        "rs232SyncPortFrameCheckErrs" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of frames with an invalid frame check
+sequence, input from the port since system
+re-initialization and while the port state was 'up'
+or 'test'.""",
+        }, # column
+        "rs232SyncPortTransmitUnderrunErrs" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of frames that failed to be
+transmitted on the port since system
+re-initialization and while the port state was 'up'
+or 'test' because data was not available to the
+transmitter in time.""",
+        }, # column
+        "rs232SyncPortReceiveOverrunErrs" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of frames that failed to be received
+on the port since system re-initialization and while
+the port state was 'up' or 'test' because the
+receiver did not accept the data in time.""",
+        }, # column
+        "rs232SyncPortInterruptedFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of frames that failed to be received
+or transmitted on the port due to loss of modem
+signals since system re-initialization and while the
+port state was 'up' or 'test'.""",
+        }, # column
+        "rs232SyncPortAbortedFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of frames aborted on the port due to
+receiving an abort sequence since system
+re-initialization and while the port state was 'up'
+or 'test'.""",
+        }, # column
+        "rs232SyncPortRole" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "dte" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "dce" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "dce",
+            "description" :
+                """The role the device is playing that is using this port.
+dte    means the device is performing the role of
+       data terminal equipment
+dce    means the device is performing the role of
+       data circuit-terminating equipment.""",
+        }, # column
+        "rs232SyncPortEncoding" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "nrz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "nrzi" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "nrz",
+            "description" :
+                """The bit stream encoding technique that is in effect
+for this port.
+  nrz    for Non-Return to Zero encoding
+  nrzi   for Non-Return to Zero Inverted encoding.""",
+        }, # column
+        "rs232SyncPortRTSControl" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "controlled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "constant" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "constant",
+            "description" :
+                """The method used to control the Request To Send (RTS)
+signal.
+
+  controlled  when the DTE is asserts RTS each time
+              data needs to be transmitted and drops
+              RTS at some point after data
+              transmission begins.
+
+              If rs232SyncPortRole is 'dte', the
+              RTS is an output signal. The device
+              will issue a RTS and wait for a CTS
+              from the DCE before starting to
+              transmit.
+
+              If rs232SyncPortRole is 'dce', the
+              RTS is an input signal. The device
+              will issue a CTS only after having
+              received RTS and waiting the
+              rs232SyncPortRTSCTSDelay interval.
+
+  constant    when the DTE constantly asserts RTS.""",
+        }, # column
+        "rs232SyncPortRTSCTSDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The interval (in milliseconds) that the DCE must wait
+after it sees RTS asserted before asserting CTS.  This
+object exists in support of older synchronous devices
+that cannot recognize CTS within a certain interval
+after it asserts RTS.""",
+        }, # column
+        "rs232SyncPortMode" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "fdx" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "hdx" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "simplex-receive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "simplex-send" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "fdx",
+            "description" :
+                """The mode of operation of the port with respect to the
+direction and simultaneity of data transfer.
+  fdx              when frames on the data link can be
+                   transmitted and received at the same
+                   time
+
+  hdx              when frames can either be received
+                   from the data link or transmitted
+                   onto the data link but not at the
+                   same time.
+
+  simplex-receive  when frames can only be received on
+                   this data link.
+
+  simplex-send     when frames can only be sent on this
+                   data link.""",
+        }, # column
+        "rs232SyncPortIdlePattern" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "mark" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "space" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "space",
+            "description" :
+                """The bit pattern used to indicate an idle line.""",
+        }, # column
+        "rs232SyncPortMinFlags" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.4.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "default" : "2",
+            "description" :
+                """The minimum number of flag patterns this port needs in
+order to recognize the end of one frame and the start
+of the next.  Plausible values are 1 and 2.""",
+        }, # column
+        "rs232InSigTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.5",
+            "status" : "current",
+            "description" :
+                """A list of port input control signal entries
+implemented and visible to the software on the port,
+and useful to monitor.""",
+        }, # table
+        "rs232InSigEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.5.1",
+            "status" : "current",
+            "linkage" : [
+                "rs232InSigPortIndex",
+                "rs232InSigName",
+            ],
+            "description" :
+                """Input control signal status for a hardware port.""",
+        }, # row
+        "rs232InSigPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of rs232PortIndex for the port to which
+this entry belongs.""",
+        }, # column
+        "rs232InSigName" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "rts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "cts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dsr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "dtr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "ri" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "dcd" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "sq" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "srs" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "srts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "scts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "sdcd" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Identification of a hardware signal, as follows:
+
+rts    Request to Send
+cts    Clear to Send
+dsr    Data Set Ready
+dtr    Data Terminal Ready
+ri     Ring Indicator
+dcd    Received Line Signal Detector
+sq     Signal Quality Detector
+srs    Data Signaling Rate Selector
+srts   Secondary Request to Send
+scts   Secondary Clear to Send
+sdcd   Secondary Received Line Signal Detector""",
+            "reference" :
+                """EIA Standard RS-232-C, August 1969.""",
+        }, # column
+        "rs232InSigState" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "on" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "off" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current signal state.""",
+        }, # column
+        "rs232InSigChanges" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the signal has changed from
+'on' to 'off' or from 'off' to 'on'.""",
+        }, # column
+        "rs232OutSigTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.6",
+            "status" : "current",
+            "description" :
+                """A list of port output control signal entries
+implemented and visible to the software on the port,
+and useful to monitor.""",
+        }, # table
+        "rs232OutSigEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.6.1",
+            "status" : "current",
+            "linkage" : [
+                "rs232OutSigPortIndex",
+                "rs232OutSigName",
+            ],
+            "description" :
+                """Output control signal status for a hardware port.""",
+        }, # row
+        "rs232OutSigPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of rs232PortIndex for the port to which
+this entry belongs.""",
+        }, # column
+        "rs232OutSigName" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "rts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "cts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dsr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "dtr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "ri" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "dcd" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "sq" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "srs" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "srts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "scts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "sdcd" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Identification of a hardware signal, as follows:
+
+rts    Request to Send
+cts    Clear to Send
+dsr    Data Set Ready
+dtr    Data Terminal Ready
+ri     Ring Indicator
+dcd    Received Line Signal Detector
+sq     Signal Quality Detector
+srs    Data Signaling Rate Selector
+srts   Secondary Request to Send
+scts   Secondary Clear to Send
+sdcd   Secondary Received Line Signal Detector""",
+            "reference" :
+                """EIA Standard RS-232-C, August 1969.""",
+        }, # column
+        "rs232OutSigState" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.6.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "on" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "off" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current signal state.""",
+        }, # column
+        "rs232OutSigChanges" : {
+            "nodetype" : "column",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.6.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the signal has changed from
+'on' to 'off' or from 'off' to 'on'.""",
+        }, # column
+        "rs232Conformance" : {
+            "nodetype" : "node",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7",
+        }, # node
+        "rs232Groups" : {
+            "nodetype" : "node",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7.1",
+        }, # node
+        "rs232Compliances" : {
+            "nodetype" : "node",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "rs232Group" : {
+            "nodetype" : "group",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7.1.1",
+            "status" : "current",
+            "members" : {
+                "rs232Number" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortType" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortInSigNumber" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortOutSigNumber" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortInSpeed" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortOutSpeed" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortInFlowType" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232PortOutFlowType" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232InSigPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232InSigName" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232InSigState" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232InSigChanges" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232OutSigPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232OutSigName" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232OutSigState" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232OutSigChanges" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+applicable to all RS-232-like interfaces.""",
+        }, # group
+        "rs232AsyncGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7.1.2",
+            "status" : "current",
+            "members" : {
+                "rs232AsyncPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncPortBits" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncPortStopBits" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncPortParity" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncPortAutobaud" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncPortParityErrs" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncPortFramingErrs" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncPortOverrunErrs" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+applicable to asynchronous RS-232-like interfaces.""",
+        }, # group
+        "rs232SyncGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7.1.3",
+            "status" : "current",
+            "members" : {
+                "rs232SyncPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortClockSource" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortFrameCheckErrs" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortTransmitUnderrunErrs" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortReceiveOverrunErrs" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortInterruptedFrames" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortAbortedFrames" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+applicable to synchronous RS-232-like interfaces.""",
+        }, # group
+        "rs232SyncSDLCGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7.1.4",
+            "status" : "current",
+            "members" : {
+                "rs232SyncPortRole" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortEncoding" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortRTSControl" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortRTSCTSDelay" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortMode" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortIdlePattern" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232SyncPortMinFlags" : {
+                    "nodetype" : "member",
+                    "module" : "RS-232-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+applicable to synchronous RS-232-like interfaces
+running SDLC.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "rs232Compliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "RS-232-MIB",
+            "oid" : "1.3.6.1.2.1.10.33.7.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for SNMPv2 entities
+which have RS-232-like hardware interfaces.""",
+            "requires" : {
+                "rs232Group" : {
+                    "nodetype" : "mandatory",
+                    "module" : "RS-232-MIB"
+                },
+                "rs232AsyncGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "RS-232-MIB",
+                    "description" :
+                        """The Asynch group is mandatory only for those
+SNMPv2 entities which have asynchronous
+interfaces Rs-232-like.""",
+                },
+                "rs232SyncGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "RS-232-MIB",
+                    "description" :
+                        """The Synch group is mandatory only for those
+SNMPv2 entities which have synchronous
+interfaces Rs-232-like.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}