logstash-integration-snmp 4.0.0-java

data/lib/mibs/ietf/DIAL-CONTROL-MIB.dic

@@ -0,0 +1,2139 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python DIAL-CONTROL-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/DIAL-CONTROL-MIB"
+
+MIB = {
+    "moduleName" : "DIAL-CONTROL-MIB",
+
+    "DIAL-CONTROL-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF ISDN Working Group""",
+        "contact" : 
+            """        Guenter Roeck
+Postal: cisco Systems
+        170 West Tasman Drive
+        San Jose, CA 95134
+        U.S.A.
+Phone:  +1 408 527 3143
+E-mail: groeck@cisco.com""",
+        "description" :
+            """The MIB module to describe peer information for
+demand access and possibly other kinds of interfaces.""",
+        "revisions" : (
+            {
+                "date" : "1996-09-23 15:44",
+                "description" :
+                    """[Revision added by libsmi due to a LAST-UPDATED clause.]""",
+            },
+        ),
+        "identity node" : "dialControlMib",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "DisplayString"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "IANAifType-MIB", "name" : "IANAifType"},
+        {"module" : "IF-MIB", "name" : "ifOperStatus"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndex"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "RFC1213-MIB", "name" : "transmission"},
+    ),
+
+    "typedefs" : {
+        "AbsoluteCounter32" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "description" :
+                """Represents a Counter32-like value that starts at zero,
+does not decrease, and does not wrap. This may be used
+only in situations where wrapping is not possible or
+extremely unlikely. Should such a counter overflow,
+it locks at the maxium value of 4,294,967,295.
+
+The primary use of this type of counter is situations
+where a counter value is to be recorded as history
+and is thus no longer subject to reading for changing
+values.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "dialControlMib" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21",
+            "status" : "current",
+        }, # node
+        "dialControlMibObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1",
+        }, # node
+        "dialCtlConfiguration" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.1",
+        }, # node
+        "dialCtlAcceptMode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "acceptNone" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "acceptAll" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "acceptKnown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The security level for acceptance of incoming calls.
+acceptNone(1)  - incoming calls will not be accepted
+acceptAll(2)   - incoming calls will be accepted,
+                 even if there is no matching entry
+                 in the dialCtlPeerCfgTable
+acceptKnown(3) - incoming calls will be accepted only
+                 if there is a matching entry in the
+                 dialCtlPeerCfgTable""",
+        }, # scalar
+        "dialCtlTrapEnable" : {
+            "nodetype" : "scalar",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "disabled",
+            "description" :
+                """This object indicates whether dialCtlPeerCallInformation
+and dialCtlPeerCallSetup traps should be generated for
+all peers. If the value of this object is enabled(1),
+traps will be generated for all peers. If the value
+of this object is disabled(2), traps will be generated
+only for peers having dialCtlPeerCfgTrapEnable set
+to enabled(1).""",
+        }, # scalar
+        "dialCtlPeer" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2",
+        }, # node
+        "dialCtlPeerCfgTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1",
+            "status" : "current",
+            "description" :
+                """The list of peers from which the managed device
+will accept calls or to which it will place them.""",
+        }, # table
+        "dialCtlPeerCfgEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "dialCtlPeerCfgId",
+                "ifIndex",
+            ],
+            "description" :
+                """Configuration data for a single Peer. This entry is
+effectively permanent, and contains information
+to identify the peer, how to connect to the peer,
+how to identify the peer and its permissions.
+The value of dialCtlPeerCfgOriginateAddress must be
+specified before a new row in this table can become
+active(1). Any writeable parameters in an existing entry
+can be modified while the entry is active. The modification
+will take effect when the peer in question will be
+called the next time.
+An entry in this table can only be created if the
+associated ifEntry already exists.""",
+        }, # row
+        "dialCtlPeerCfgId" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object identifies a single peer. There may
+be several entries in this table for one peer,
+defining different ways of reaching this peer.
+Thus, there may be several entries in this table
+with the same value of dialCtlPeerCfgId.
+Multiple entries for one peer may be used to support
+multilink as well as backup lines.
+A single peer will be identified by a unique value
+of this object. Several entries for one peer MUST
+have the same value of dialCtlPeerCfgId, but different
+ifEntries and thus different values of ifIndex.""",
+        }, # column
+        "dialCtlPeerCfgIfType" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANAifType-MIB", "name" : "IANAifType"},
+            },
+            "access" : "readwrite",
+            "default" : "other",
+            "description" :
+                """The interface type to be used for calling this peer.
+In case of ISDN, the value of isdn(63) is to be used.""",
+        }, # column
+        "dialCtlPeerCfgLowerIf" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """ifIndex value of an interface the peer will have to be
+called on. For example, on an ISDN interface, this can be
+the ifIndex value of a D channel or the ifIndex value of a
+B channel, whatever is appropriate for a given peer.
+As an example, for Basic Rate leased lines it will be
+necessary to specify a B channel ifIndex, while for
+semi-permanent connections the D channel ifIndex has
+to be specified.
+If the interface can be dynamically assigned, this object
+has a value of zero.""",
+        }, # column
+        "dialCtlPeerCfgOriginateAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Call Address at which the peer will be called.
+Think of this as the set of characters following 'ATDT '
+or the 'phone number' included in a D channel call request.
+
+The structure of this information will be switch type
+specific. If there is no address information required
+for reaching the peer, i.e., for leased lines,
+this object will be a zero length string.""",
+        }, # column
+        "dialCtlPeerCfgAnswerAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """Calling Party Number information element, as for example
+passed in an ISDN SETUP message by a PBX or switch,
+for incoming calls.
+This address can be used to identify the peer.
+If this address is either unknown or identical
+to dialCtlPeerCfgOriginateAddress, this object will be
+a zero length string.""",
+        }, # column
+        "dialCtlPeerCfgSubAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """Subaddress at which the peer will be called.
+If the subaddress is undefined for the given media or
+unused, this is a zero length string.""",
+        }, # column
+        "dialCtlPeerCfgClosedUserGroup" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """Closed User Group at which the peer will be called.
+If the Closed User Group is undefined for the given media
+or unused, this is a zero length string.""",
+            "reference" :
+                """Q.931, chapter 4.6.1.""",
+        }, # column
+        "dialCtlPeerCfgSpeed" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The desired information transfer speed in bits/second
+when calling this peer.
+The detailed media specific information, e.g. information
+type and information transfer rate for ISDN circuits,
+has to be extracted from this object.
+If the transfer speed to be used is unknown or the default
+speed for this type of interfaces, the value of this object
+may be zero.""",
+        }, # column
+        "dialCtlPeerCfgInfoType" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "speech" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "unrestrictedDigital" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "unrestrictedDigital56" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "restrictedDigital" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "audio31" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "audio7" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "video" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "packetSwitched" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "fax" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "other",
+            "description" :
+                """The Information Transfer Capability to be used when
+calling this peer.
+
+speech(2) refers to a non-data connection, whereas
+audio31(6) and audio7(7) refer to data mode
+connections.""",
+        }, # column
+        "dialCtlPeerCfgPermission" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "originate" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "answer" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "both" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "callback" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "both",
+            "description" :
+                """Applicable permissions. callback(4) either rejects the
+call and then calls back, or uses the 'Reverse charging'
+information element if it is available.
+Note that callback(4) is supposed to control charging, not
+security, and applies to callback prior to accepting a
+call. Callback for security reasons can be handled using
+PPP callback.""",
+        }, # column
+        "dialCtlPeerCfgInactivityTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """The connection will be automatically disconnected
+if no longer carrying useful data for a time
+period, in seconds, specified in this object.
+Useful data in this context refers to forwarding
+packets, including routing information; it
+excludes the encapsulator maintenance frames.
+A value of zero means the connection will not be
+automatically taken down due to inactivity,
+which implies that it is a dedicated circuit.""",
+        }, # column
+        "dialCtlPeerCfgMinDuration" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Minimum duration of a call in seconds, starting from the
+time the call is connected until the call is disconnected.
+This is to accomplish the fact that in most countries
+charging applies to units of time, which should be matched
+as closely as possible.""",
+        }, # column
+        "dialCtlPeerCfgMaxDuration" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Maximum call duration in seconds. Zero means 'unlimited'.""",
+        }, # column
+        "dialCtlPeerCfgCarrierDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """The call timeout time in seconds. The default value
+of zero means that the call timeout as specified for
+the media in question will apply.""",
+        }, # column
+        "dialCtlPeerCfgCallRetries" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The number of calls to a non-responding address
+that may be made. A retry count of zero means
+there is no bound. The intent is to bound
+the number of successive calls to an address
+which is inaccessible, or which refuses those calls.
+
+Some countries regulate the number of call retries
+to a given peer that can be made.""",
+        }, # column
+        "dialCtlPeerCfgRetryDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """The time in seconds between call retries if a peer
+cannot be reached.
+A value of zero means that call retries may be done
+without any delay.""",
+        }, # column
+        "dialCtlPeerCfgFailureDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """The time in seconds after which call attempts are
+to be placed again after a peer has been noticed
+to be unreachable, i.e. after dialCtlPeerCfgCallRetries
+unsuccessful call attempts.
+A value of zero means that a peer will not be called
+again after dialCtlPeerCfgCallRetries unsuccessful call
+attempts.""",
+        }, # column
+        "dialCtlPeerCfgTrapEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "disabled",
+            "description" :
+                """This object indicates whether dialCtlPeerCallInformation
+and dialCtlPeerCallSetup traps should be generated for
+this peer.""",
+        }, # column
+        "dialCtlPeerCfgStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.1.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Status of one row in this table.""",
+        }, # column
+        "dialCtlPeerStatsTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2",
+            "status" : "current",
+            "description" :
+                """Statistics information for each peer entry.
+There will be one entry in this table for each entry
+in the dialCtlPeerCfgTable.""",
+        }, # table
+        "dialCtlPeerStatsEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1",
+            "status" : "current",
+            "linkage" : [
+                { "DIAL-CONTROL-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "dialCtlPeerCfgEntry",
+                }},
+            ],
+            "description" :
+                """Statistics information for a single Peer. This entry
+is effectively permanent, and contains information
+describing the last call attempt as well as supplying
+statistical information.""",
+        }, # row
+        "dialCtlPeerStatsConnectTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Accumulated connect time to the peer since system startup.
+This is the total connect time, i.e. the connect time
+for outgoing calls plus the time for incoming calls.""",
+        }, # column
+        "dialCtlPeerStatsChargedUnits" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of charging units applying to this
+peer since system startup.
+Only the charging units applying to the local interface,
+i.e. for originated calls or for calls with 'Reverse
+charging' being active, will be counted here.""",
+        }, # column
+        "dialCtlPeerStatsSuccessCalls" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of completed calls to this peer.""",
+        }, # column
+        "dialCtlPeerStatsFailCalls" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of failed call attempts to this peer since system
+startup.""",
+        }, # column
+        "dialCtlPeerStatsAcceptCalls" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of calls from this peer accepted since system
+startup.""",
+        }, # column
+        "dialCtlPeerStatsRefuseCalls" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of calls from this peer refused since system
+startup.""",
+        }, # column
+        "dialCtlPeerStatsLastDisconnectCause" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The encoded network cause value associated with the last
+call.
+This object will be updated whenever a call is started
+or cleared.
+The value of this object will depend on the interface type
+as well as on the protocol and protocol version being
+used on this interface. Some references for possible cause
+values are given below.""",
+            "reference" :
+                """- Bellcore SR-NWT-001953, Generic Guidelines for
+ISDN Terminal Equipment On Basic Access Interfaces,
+chapter 5.2.5.8.
+- Bellcore SR-NWT-002343, ISDN Primary Rate Interface
+Generic Guidelines for Customer Premises Equipment,
+chapter 8.2.5.8.
+- ITU-T Q.931, Appendix I.
+- ITU-T X.25, CAUSE and DIAGNOSTIC field values.
+- German Telekom FTZ 1TR6, chapter 3.2.3.4.4.4.""",
+        }, # column
+        "dialCtlPeerStatsLastDisconnectText" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ASCII text describing the reason for the last call
+termination.
+This object exists because it would be impossible for
+a management station to store all possible cause values
+for all types of interfaces. It should be used only if
+a management station is unable to decode the value of
+dialCtlPeerStatsLastDisconnectCause.
+
+This object will be updated whenever a call is started
+or cleared.""",
+        }, # column
+        "dialCtlPeerStatsLastSetupTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.2.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the last call to this peer
+was started.
+For ISDN media, this will be the time when the setup
+message was received from or sent to the network.
+This object will be updated whenever a call is started
+or cleared.""",
+        }, # column
+        "callActive" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3",
+        }, # node
+        "callActiveTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1",
+            "status" : "current",
+            "description" :
+                """A table containing information about active
+calls to a specific destination.""",
+        }, # table
+        "callActiveEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "callActiveSetupTime",
+                "callActiveIndex",
+            ],
+            "description" :
+                """The information regarding a single active Connection.
+An entry in this table will be created when a call is
+started. An entry in this table will be deleted when
+an active call clears.""",
+        }, # row
+        "callActiveSetupTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The value of sysUpTime when the call associated to this
+entry was started. This will be useful for an NMS to
+retrieve all calls after a specific time. Also, this object
+can be useful in finding large delays between the time the
+call was started and the time the call was connected.
+For ISDN media, this will be the time when the setup
+message was received from or sent to the network.""",
+        }, # column
+        "callActiveIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Small index variable to distinguish calls that start in
+the same hundredth of a second.""",
+        }, # column
+        "callActivePeerAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number this call is connected to. If the number is
+not available, then it will have a length of zero.""",
+        }, # column
+        "callActivePeerSubAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The subaddress this call is connected to. If the subaddress
+is undefined or not available, this will be a zero length
+string.""",
+        }, # column
+        "callActivePeerId" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This is the Id value of the peer table entry
+to which this call was made. If a peer table entry
+for this call does not exist or is unknown, the value
+of this object will be zero.""",
+        }, # column
+        "callActivePeerIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This is the ifIndex value of the peer table entry
+to which this call was made. If a peer table entry
+for this call does not exist or is unknown, the value
+of this object will be zero.""",
+        }, # column
+        "callActiveLogicalIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This is the ifIndex value of the logical interface through
+which this call was made. For ISDN media, this would be
+the ifIndex of the B channel which was used for this call.
+If the ifIndex value is unknown, the value of this object
+will be zero.""",
+        }, # column
+        "callActiveConnectTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the call was connected.
+If the call is not connected, this object will have a
+value of zero.""",
+        }, # column
+        "callActiveCallState" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "connecting" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "connected" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "active" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current call state.
+unknown(1)     - The call state is unknown.
+connecting(2)  - A connection attempt (outgoing call)
+                 is being made.
+connected(3)   - An incoming call is in the process
+                 of validation.
+active(4)      - The call is active.""",
+        }, # column
+        "callActiveCallOrigin" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "originate" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "answer" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "callback" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The call origin.""",
+        }, # column
+        "callActiveChargedUnits" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of charged units for this connection.
+For incoming calls or if charging information is
+not supplied by the switch, the value of this object
+will be zero.""",
+        }, # column
+        "callActiveInfoType" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "speech" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "unrestrictedDigital" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "unrestrictedDigital56" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "restrictedDigital" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "audio31" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "audio7" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "video" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "packetSwitched" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "fax" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The information type for this call.""",
+        }, # column
+        "callActiveTransmitPackets" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of packets which were transmitted for this
+call.""",
+        }, # column
+        "callActiveTransmitBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of bytes which were transmitted for this
+call.""",
+        }, # column
+        "callActiveReceivePackets" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of packets which were received for this
+call.""",
+        }, # column
+        "callActiveReceiveBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.3.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of bytes which were received for this call.""",
+        }, # column
+        "callHistory" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4",
+        }, # node
+        "callHistoryTableMaxLength" : {
+            "nodetype" : "scalar",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The upper limit on the number of entries that the
+callHistoryTable may contain.  A value of 0
+will prevent any history from being retained. When
+this table is full, the oldest entry will be deleted
+and the new one will be created.""",
+        }, # scalar
+        "callHistoryRetainTimer" : {
+            "nodetype" : "scalar",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "minutes",
+            "description" :
+                """The minimum amount of time that an callHistoryEntry
+will be maintained before being deleted. A value of
+0 will prevent any history from being retained in the
+callHistoryTable, but will neither prevent callCompletion
+traps being generated nor affect other tables.""",
+        }, # scalar
+        "callHistoryTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3",
+            "status" : "current",
+            "description" :
+                """A table containing information about specific
+calls to a specific destination.""",
+        }, # table
+        "callHistoryEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1",
+            "status" : "current",
+            "linkage" : [
+                "callActiveSetupTime",
+                "callActiveIndex",
+            ],
+            "description" :
+                """The information regarding a single Connection.""",
+        }, # row
+        "callHistoryPeerAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number this call was connected to. If the number is
+not available, then it will have a length of zero.""",
+        }, # column
+        "callHistoryPeerSubAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The subaddress this call was connected to. If the subaddress
+is undefined or not available, this will be a zero length
+string.""",
+        }, # column
+        "callHistoryPeerId" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This is the Id value of the peer table entry
+to which this call was made. If a peer table entry
+for this call does not exist, the value of this object
+will be zero.""",
+        }, # column
+        "callHistoryPeerIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This is the ifIndex value of the peer table entry
+to which this call was made. If a peer table entry
+for this call does not exist, the value of this object
+will be zero.""",
+        }, # column
+        "callHistoryLogicalIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This is the ifIndex value of the logical interface through
+which this call was made. For ISDN media, this would be
+the ifIndex of the B channel which was used for this call.""",
+        }, # column
+        "callHistoryDisconnectCause" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The encoded network cause value associated with this call.
+
+The value of this object will depend on the interface type
+as well as on the protocol and protocol version being
+used on this interface. Some references for possible cause
+values are given below.""",
+            "reference" :
+                """- Bellcore SR-NWT-001953, Generic Guidelines for
+ISDN Terminal Equipment On Basic Access Interfaces,
+chapter 5.2.5.8.
+- Bellcore SR-NWT-002343, ISDN Primary Rate Interface
+Generic Guidelines for Customer Premises Equipment,
+chapter 8.2.5.8.
+- ITU-T Q.931, Appendix I.
+- ITU-T X.25, CAUSE and DIAGNOSTIC field values.
+- German Telekom FTZ 1TR6, chapter 3.2.3.4.4.4.""",
+        }, # column
+        "callHistoryDisconnectText" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "DisplayString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ASCII text describing the reason for call termination.
+
+This object exists because it would be impossible for
+a management station to store all possible cause values
+for all types of interfaces. It should be used only if
+a management station is unable to decode the value of
+dialCtlPeerStatsLastDisconnectCause.""",
+        }, # column
+        "callHistoryConnectTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the call was connected.""",
+        }, # column
+        "callHistoryDisconnectTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the call was disconnected.""",
+        }, # column
+        "callHistoryCallOrigin" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "originate" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "answer" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "callback" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The call origin.""",
+        }, # column
+        "callHistoryChargedUnits" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of charged units for this connection.
+For incoming calls or if charging information is
+not supplied by the switch, the value of this object
+will be zero.""",
+        }, # column
+        "callHistoryInfoType" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "speech" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "unrestrictedDigital" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "unrestrictedDigital56" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "restrictedDigital" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "audio31" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "audio7" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "video" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "packetSwitched" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "fax" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The information type for this call.""",
+        }, # column
+        "callHistoryTransmitPackets" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of packets which were transmitted while this
+call was active.""",
+        }, # column
+        "callHistoryTransmitBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of bytes which were transmitted while this
+call was active.""",
+        }, # column
+        "callHistoryReceivePackets" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of packets which were received while this
+call was active.""",
+        }, # column
+        "callHistoryReceiveBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.1.4.3.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIAL-CONTROL-MIB", "name" : "AbsoluteCounter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of bytes which were received while this
+call was active.""",
+        }, # column
+        "dialControlMibTrapPrefix" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.2",
+        }, # node
+        "dialControlMibTraps" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.2.0",
+        }, # node
+        "dialControlMibConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3",
+        }, # node
+        "dialControlMibCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3.1",
+        }, # node
+        "dialControlMibGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "dialCtlPeerCallInformation" : {
+            "nodetype" : "notification",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.2.0.1",
+            "status" : "current",
+            "objects" : {
+                "callHistoryPeerId" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryPeerIfIndex" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryLogicalIfIndex" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "ifOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "callHistoryPeerAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryPeerSubAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryDisconnectCause" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryConnectTime" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryDisconnectTime" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryInfoType" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryCallOrigin" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+            },
+            "description" :
+                """This trap/inform is sent to the manager whenever
+a successful call clears, or a failed call attempt
+is determined to have ultimately failed. In the
+event that call retry is active, then this is after
+all retry attempts have failed. However, only one such
+trap is sent in between successful call attempts;
+subsequent call attempts result in no trap.
+ifOperStatus will return the operational status of the
+virtual interface associated with the peer to whom
+this call was made to.""",
+        }, # notification
+        "dialCtlPeerCallSetup" : {
+            "nodetype" : "notification",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.2.0.2",
+            "status" : "current",
+            "objects" : {
+                "callActivePeerId" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActivePeerIfIndex" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveLogicalIfIndex" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "ifOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "callActivePeerAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActivePeerSubAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveInfoType" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveCallOrigin" : {
+                    "nodetype" : "object",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+            },
+            "description" :
+                """This trap/inform is sent to the manager whenever
+a call setup message is received or sent.
+ifOperStatus will return the operational status of the
+virtual interface associated with the peer to whom
+this call was made to.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "dialControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3.2.1",
+            "status" : "current",
+            "members" : {
+                "dialCtlAcceptMode" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlTrapEnable" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgIfType" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgLowerIf" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgOriginateAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgAnswerAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgSubAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgClosedUserGroup" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgSpeed" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgInfoType" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgPermission" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgInactivityTimer" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgMinDuration" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgMaxDuration" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgCarrierDelay" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgCallRetries" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgRetryDelay" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgFailureDelay" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgTrapEnable" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCfgStatus" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsConnectTime" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsChargedUnits" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsSuccessCalls" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsFailCalls" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsAcceptCalls" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsRefuseCalls" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsLastDisconnectCause" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsLastDisconnectText" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerStatsLastSetupTime" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing the DIAL CONTROL
+capability.""",
+        }, # group
+        "callActiveGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3.2.2",
+            "status" : "current",
+            "members" : {
+                "callActivePeerAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActivePeerSubAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActivePeerId" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActivePeerIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveLogicalIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveConnectTime" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveCallState" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveCallOrigin" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveChargedUnits" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveInfoType" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveTransmitPackets" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveTransmitBytes" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveReceivePackets" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveReceiveBytes" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing the active call
+capability.""",
+        }, # group
+        "callHistoryGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3.2.3",
+            "status" : "current",
+            "members" : {
+                "callHistoryTableMaxLength" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryRetainTimer" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryPeerAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryPeerSubAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryPeerId" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryPeerIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryLogicalIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryDisconnectCause" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryDisconnectText" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryConnectTime" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryDisconnectTime" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryCallOrigin" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryChargedUnits" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryInfoType" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryTransmitPackets" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryTransmitBytes" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryReceivePackets" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryReceiveBytes" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing the Call History
+capability.""",
+        }, # group
+        "callNotificationsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3.2.4",
+            "status" : "current",
+            "members" : {
+                "dialCtlPeerCallInformation" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "dialCtlPeerCallSetup" : {
+                    "nodetype" : "member",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+            }, # members
+            "description" :
+                """The notifications which a Dial Control MIB entity is
+required to implement.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "dialControlMibCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "DIAL-CONTROL-MIB",
+            "oid" : "1.3.6.1.2.1.10.21.3.1.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for entities which
+implement the DIAL CONTROL MIB""",
+            "requires" : {
+                "dialControlGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callActiveGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callHistoryGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+                "callNotificationsGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DIAL-CONTROL-MIB"
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}