logstash-integration-snmp 4.0.0-java

data/lib/mibs/ietf/MPLS-LDP-ATM-STD-MIB.dic

@@ -0,0 +1,1019 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python MPLS-LDP-ATM-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/MPLS-LDP-ATM-STD-MIB"
+
+MIB = {
+    "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+
+    "MPLS-LDP-ATM-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """Multiprotocol Label Switching (mpls)
+Working Group""",
+        "contact" : 
+            """Joan Cucchiara (jcucchiara@mindspring.com)
+Marconi Communications, Inc.
+
+Hans Sjostrand (hans@ipunplugged.com)
+ipUnplugged
+
+James V. Luciani (james_luciani@mindspring.com)
+Marconi Communications, Inc.
+
+Working Group Chairs:
+George Swallow,   email: swallow@cisco.com
+Loa Andersson,    email: loa@pi.se
+
+MPLS Working Group, email: mpls@uu.net""",
+        "description" :
+            """Copyright (C) The Internet Society (2004). The
+initial version of this MIB module was published
+in RFC 3815. For full legal notices see the RFC
+itself or see:
+http://www.ietf.org/copyrights/ianamib.html
+
+This MIB contains managed object definitions for
+configuring and monitoring the Multiprotocol Label
+Switching (MPLS), Label Distribution Protocol (LDP),
+utilizing Asynchronous Transfer Mode (ATM) as the Layer 2
+media.""",
+        "revisions" : (
+            {
+                "date" : "2004-06-03 00:00",
+                "description" :
+                    """Initial version published as part of RFC 3815.""",
+            },
+        ),
+        "identity node" : "mplsLdpAtmStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "ATM-TC-MIB", "name" : "AtmVpIdentifier"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "mplsStdMIB"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "MplsAtmVcIdentifier"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpEntityLdpId"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpEntityIndex"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpPeerLdpId"},
+    ),
+
+    "nodes" : {
+        "mplsLdpAtmStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5",
+            "status" : "current",
+        }, # node
+        "mplsLdpAtmObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1",
+        }, # node
+        "mplsLdpEntityAtmObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1",
+        }, # node
+        "mplsLdpEntityAtmTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1",
+            "status" : "current",
+            "description" :
+                """This table contains ATM specific information
+which could be used in the
+'Optional Parameters' and other ATM specific
+information.
+
+This table 'sparse augments' the mplsLdpEntityTable
+when ATM is the Layer 2 medium.""",
+        }, # table
+        "mplsLdpEntityAtmEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+            ],
+            "description" :
+                """An entry in this table represents the ATM parameters
+and ATM information for this LDP entity.""",
+        }, # row
+        "mplsLdpEntityAtmIfIndexOrZero" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This value represents either the InterfaceIndex
+or 0 (zero).  The value of zero means that the
+InterfaceIndex is not known.
+
+However, if the InterfaceIndex is known, then it must
+be represented by this value.
+
+If an InterfaceIndex becomes known, then the
+network management entity (e.g., SNMP agent) responsible
+for this object MUST change the value from 0 (zero) to the
+value of the InterfaceIndex.  If an ATM Label is
+being used in forwarding data, then the value of this
+object MUST be the InterfaceIndex.""",
+        }, # column
+        "mplsLdpEntityAtmMergeCap" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "notSupported" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "vpMerge" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "vcMerge" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "vpAndVcMerge" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Denotes the Merge Capability of this Entity.
+This is the EXACT value for the ATM Session
+Parameter, field M (for ATM Merge Capabilities).
+The ATM Session Parameter is an optional
+parameter in the Initialization Message.
+
+The description from rfc3036.txt is:
+
+'M, ATM Merge Capabilities
+   Specifies the merge capabilities of an ATM switch.  The
+   following values are supported in this version of the
+   specification:
+
+          Value          Meaning
+
+            0            Merge not supported
+            1            VP Merge supported
+            2            VC Merge supported
+            3            VP & VC Merge supported
+
+
+
+
+   If the merge capabilities of the LSRs differ, then:
+   -  Non-merge and VC-merge LSRs may freely interoperate.
+
+   -  The interoperability of VP-merge-capable switches
+      with non-VP-merge-capable switches is a subject
+      for future study.  When the LSRs differ on the
+      use of VP-merge, the session is established,
+      but VP merge is not used.'
+
+   Please refer to the following reference for a
+   complete description of this feature.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityAtmLRComponents" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of Label Range Components in the Initialization
+message.  This also represents the number of entries
+in the mplsLdpEntityAtmLRTable which correspond
+to this entry.
+
+This is the EXACT value for the ATM Session Parameter,
+field N (for Number of label range components).
+The ATM Session Parameter is an optional parameter
+in the Initialization Message.
+
+The description from rfc3036.txt is:
+
+'N, Number of label range components
+   Specifies the number of ATM Label Range
+   Components included in the TLV.'
+
+ Please refer to the following reference for
+ a complete description of this feature.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityAtmVcDirectionality" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "bidirectional" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "unidirectional" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """If the value of this object is 'bidirectional(0)',
+a given VCI, within a given VPI, is used as a
+label for both directions independently.
+
+If the value of this object is 'unidirectional(1)',
+a given VCI within a VPI designates one direction.
+
+This is the EXACT value for the ATM Session Parameter,
+field D (for VC Directionality).  The ATM Session
+Parameter is an optional parameter in the
+Initialization Message.
+
+The description from rfc3036.txt is:
+
+'D, VC Directionality
+   A value of 0 specifies bidirectional VC capability,
+   meaning the LSR can (within a given VPI) support
+   the use of a given VCI as a label for both link
+   directions independently.  A value of 1
+   specifies unidirectional VC capability, meaning
+   (within a given VPI) a given VCI may appear in
+   a label mapping for one direction on the link
+   only.  When either or both of the peers
+   specifies unidirectional VC capability, both
+   LSRs use unidirectional VC label assignment for
+   the link as follows.  The LSRs compare their
+   LDP Identifiers as unsigned integers.  The LSR
+   with the larger LDP Identifier may assign
+   only odd-numbered VCIs in the VPI/VCI
+   range as labels.  The system with the smaller
+   LDP Identifier may assign only even-numbered
+   VCIs in the VPI/VCI range as labels.'
+
+   Please refer to the following reference
+   for a complete description of this feature.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityAtmLsrConnectivity" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "direct" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "indirect" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "direct",
+            "description" :
+                """The peer LSR may be connected indirectly by means
+of an ATM VP so that the VPI values may be different
+on either endpoint so the label MUST be encoded
+entirely within the VCI field.""",
+        }, # column
+        "mplsLdpEntityAtmDefaultControlVpi" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"ATM-TC-MIB", "name" : "AtmVpIdentifier"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The default VPI value for the non-MPLS connection.  The
+default value of this is 0 (zero) but other values may
+be configured.  This object allows a different value
+to be configured.""",
+        }, # column
+        "mplsLdpEntityAtmDefaultControlVci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsAtmVcIdentifier"},
+            },
+            "access" : "readwrite",
+            "default" : "32",
+            "description" :
+                """The Default VCI value for a non-MPLS connection.  The
+default value of this is 32 but other values may be
+configured.  This object allows a different value to
+be configured.""",
+        }, # column
+        "mplsLdpEntityAtmUnlabTrafVpi" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"ATM-TC-MIB", "name" : "AtmVpIdentifier"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """VPI value of the VCC supporting unlabeled traffic.  This
+non-MPLS connection is used to carry unlabeled (IP)
+packets.  The default value is the same as the default
+value of the 'mplsLdpEntityAtmDefaultControlVpi', however
+another value may be configured.""",
+        }, # column
+        "mplsLdpEntityAtmUnlabTrafVci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsAtmVcIdentifier"},
+            },
+            "access" : "readwrite",
+            "default" : "32",
+            "description" :
+                """VCI value of the VCC supporting unlabeled traffic.
+This non-MPLS connection is used to carry unlabeled (IP)
+packets. The default value is the same as the default
+value of the 'mplsLdpEntityAtmDefaultControlVci', however
+another value may be configured.""",
+        }, # column
+        "mplsLdpEntityAtmStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsLdpEntityAtmRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  All writable
+objects in this row may be modified at any time,
+however, as described in detail in the section
+entitled, 'Changing Values After Session
+Establishment', and again described in the
+DESCRIPTION clause of the mplsLdpEntityAdminStatus
+object, if a session has been initiated with a Peer,
+changing objects in this table will wreak havoc
+with the session and interrupt traffic.  To repeat again:
+the recommended procedure is to set the
+mplsLdpEntityAdminStatus to down, thereby explicitly
+causing a session to be torn down. Then,
+change objects in this entry, then set the
+mplsLdpEntityAdminStatus to enable
+which enables a new session to be initiated.""",
+        }, # column
+        "mplsLdpEntityAtmLRTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2",
+            "status" : "current",
+            "description" :
+                """The MPLS LDP Entity ATM Label Range (LR) Table.
+The purpose of this table is to provide a mechanism
+for configuring a contiguous range of vpi's
+with a contiguous range of vci's, or a 'label range'
+for LDP Entities.
+
+LDP Entities which use ATM must have at least one
+entry in this table.
+
+There must exist at least one entry in this
+table for every LDP Entity that has
+'mplsLdpEntityOptionalParameters' object with
+a value of 'atmSessionParameters'.""",
+        }, # table
+        "mplsLdpEntityAtmLREntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpEntityAtmLRMinVpi",
+                "mplsLdpEntityAtmLRMinVci",
+            ],
+            "description" :
+                """A row in the LDP Entity ATM Label
+Range Table.  One entry in this table contains
+information on a single range of labels
+represented by the configured Upper and Lower
+Bounds VPI/VCI pairs.  These are the same
+data used in the Initialization Message.
+
+NOTE:  The ranges for a specific LDP Entity
+are UNIQUE and non-overlapping.  For example,
+for a specific LDP Entity index, there could
+be one entry having LowerBound vpi/vci == 0/32, and
+UpperBound vpi/vci == 0/100, and a second entry
+for this same interface with LowerBound
+vpi/vci == 0/101 and UpperBound vpi/vci == 0/200.
+However, there could not be a third entry with
+LowerBound vpi/vci == 0/200 and
+UpperBound vpi/vci == 0/300 because this label
+range overlaps with the second entry (i.e., both
+entries now have 0/200).
+
+
+
+A row will not become active unless a unique and
+non-overlapping range is specified.
+
+At least one label range entry for a
+specific LDP Entity MUST
+include the default VPI/VCI  values denoted
+in the LDP Entity Table.
+
+A request to create a row with an overlapping
+range should result in an inconsistentValue
+error.""",
+        }, # row
+        "mplsLdpEntityAtmLRMinVpi" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"ATM-TC-MIB", "name" : "AtmVpIdentifier"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The minimum VPI number configured for this range.
+The value of zero is a valid value for the VPI portion
+of the label.""",
+        }, # column
+        "mplsLdpEntityAtmLRMinVci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsAtmVcIdentifier"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The minimum VCI number configured for this range.""",
+        }, # column
+        "mplsLdpEntityAtmLRMaxVpi" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"ATM-TC-MIB", "name" : "AtmVpIdentifier"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The maximum VPI number configured for this range.""",
+        }, # column
+        "mplsLdpEntityAtmLRMaxVci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsAtmVcIdentifier"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The maximum VCI number configured for this range.""",
+        }, # column
+        "mplsLdpEntityAtmLRStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsLdpEntityAtmLRRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  All writable
+objects in this row may be modified at any time,
+however, as described in detail in the section
+entitled, 'Changing Values After Session
+Establishment', and again described in the
+DESCRIPTION clause of the
+mplsLdpEntityAdminStatus object,
+if a session has been initiated with a Peer,
+changing objects in this table will
+wreak havoc with the session and interrupt traffic.
+To repeat again:  the recommended procedure
+is to set the mplsLdpEntityAdminStatus to
+down, thereby explicitly causing a session
+to be torn down. Then, change objects in this
+entry, then set the mplsLdpEntityAdminStatus
+to enable which enables a new session
+to be initiated.""",
+        }, # column
+        "mplsLdpAtmSessionObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.2",
+        }, # node
+        "mplsLdpAtmSessionTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.2.1",
+            "status" : "current",
+            "description" :
+                """A table which relates sessions in the
+'mplsLdpSessionTable' and their label
+range intersections.  There could be one
+or more label range intersections between an
+LDP Entity and LDP Peer using ATM as the
+underlying  media.  Each row represents
+a single label range intersection.
+
+This table cannot use the 'AUGMENTS'
+clause because there is not necessarily
+a one-to-one mapping between this table
+and the mplsLdpSessionTable.""",
+        }, # table
+        "mplsLdpAtmSessionEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.2.1.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+                "mplsLdpSessionAtmLRLowerBoundVpi",
+                "mplsLdpSessionAtmLRLowerBoundVci",
+            ],
+            "description" :
+                """An entry in this table represents information on a
+single label range intersection between an LDP Entity
+and LDP Peer.
+
+The information contained in a row is read-only.""",
+        }, # row
+        "mplsLdpSessionAtmLRLowerBoundVpi" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"ATM-TC-MIB", "name" : "AtmVpIdentifier"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The minimum VPI number for this range.""",
+        }, # column
+        "mplsLdpSessionAtmLRLowerBoundVci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsAtmVcIdentifier"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The minimum VCI number for this range.""",
+        }, # column
+        "mplsLdpSessionAtmLRUpperBoundVpi" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.2.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"ATM-TC-MIB", "name" : "AtmVpIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The maximum VPI number for this range.""",
+        }, # column
+        "mplsLdpSessionAtmLRUpperBoundVci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.1.2.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsAtmVcIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The maximum VCI number for this range.""",
+        }, # column
+        "mplsLdpAtmConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.2",
+        }, # node
+        "mplsLdpAtmGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.2.1",
+        }, # node
+        "mplsLdpAtmCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "mplsLdpAtmGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.2.1.1",
+            "status" : "current",
+            "members" : {
+                "mplsLdpEntityAtmIfIndexOrZero" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmMergeCap" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmLRComponents" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmVcDirectionality" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmLsrConnectivity" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmDefaultControlVpi" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmDefaultControlVci" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmUnlabTrafVpi" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmUnlabTrafVci" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmLRMaxVpi" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmLRMaxVci" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmLRStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpEntityAtmLRRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpSessionAtmLRUpperBoundVpi" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+                "mplsLdpSessionAtmLRUpperBoundVci" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Objects that apply to all MPLS LDP implementations
+using ATM as the Layer 2.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "mplsLdpAtmModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.2.2.1",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support for
+read-create and read-write.  In other words,
+both monitoring and configuration
+are available when using this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpAtmGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityAtmRowStatus" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not required.""",
+                },
+                "mplsLdpEntityAtmLRRowStatus" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "mplsLdpAtmModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-ATM-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.5.2.2.2",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support for
+read-only.  In other words, only monitoring
+is available by implementing this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpAtmGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-ATM-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityAtmIfIndexOrZero" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmMergeCap" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmVcDirectionality" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmLsrConnectivity" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmDefaultControlVpi" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmDefaultControlVci" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmUnlabTrafVpi" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmUnlabTrafVci" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmStorageType" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmRowStatus" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+                "mplsLdpEntityAtmLRMaxVpi" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmLRMaxVci" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmLRStorageType" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAtmLRRowStatus" : {
+                    "module" : "MPLS-LDP-ATM-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}