grpc 1.9.1 → 1.10.0.pre1

data/third_party/boringssl/crypto/ec/util-64.c

@@ -1,109 +0,0 @@
-/* Copyright (c) 2015, Google Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */
-
-#include <openssl/base.h>
-
-
-#if defined(OPENSSL_64_BIT) && !defined(OPENSSL_WINDOWS)
-
-#include <openssl/ec.h>
-
-#include "internal.h"
-
-/* This function looks at 5+1 scalar bits (5 current, 1 adjacent less
- * significant bit), and recodes them into a signed digit for use in fast point
- * multiplication: the use of signed rather than unsigned digits means that
- * fewer points need to be precomputed, given that point inversion is easy (a
- * precomputed point dP makes -dP available as well).
- *
- * BACKGROUND:
- *
- * Signed digits for multiplication were introduced by Booth ("A signed binary
- * multiplication technique", Quart. Journ. Mech. and Applied Math., vol. IV,
- * pt. 2 (1951), pp. 236-240), in that case for multiplication of integers.
- * Booth's original encoding did not generally improve the density of nonzero
- * digits over the binary representation, and was merely meant to simplify the
- * handling of signed factors given in two's complement; but it has since been
- * shown to be the basis of various signed-digit representations that do have
- * further advantages, including the wNAF, using the following general
- * approach:
- *
- * (1) Given a binary representation
- *
- *       b_k  ...  b_2  b_1  b_0,
- *
- *     of a nonnegative integer (b_k in {0, 1}), rewrite it in digits 0, 1, -1
- *     by using bit-wise subtraction as follows:
- *
- *        b_k b_(k-1)  ...  b_2  b_1  b_0
- *      -     b_k      ...  b_3  b_2  b_1  b_0
- *       -------------------------------------
- *        s_k b_(k-1)  ...  s_3  s_2  s_1  s_0
- *
- *     A left-shift followed by subtraction of the original value yields a new
- *     representation of the same value, using signed bits s_i = b_(i+1) - b_i.
- *     This representation from Booth's paper has since appeared in the
- *     literature under a variety of different names including "reversed binary
- *     form", "alternating greedy expansion", "mutual opposite form", and
- *     "sign-alternating {+-1}-representation".
- *
- *     An interesting property is that among the nonzero bits, values 1 and -1
- *     strictly alternate.
- *
- * (2) Various window schemes can be applied to the Booth representation of
- *     integers: for example, right-to-left sliding windows yield the wNAF
- *     (a signed-digit encoding independently discovered by various researchers
- *     in the 1990s), and left-to-right sliding windows yield a left-to-right
- *     equivalent of the wNAF (independently discovered by various researchers
- *     around 2004).
- *
- * To prevent leaking information through side channels in point multiplication,
- * we need to recode the given integer into a regular pattern: sliding windows
- * as in wNAFs won't do, we need their fixed-window equivalent -- which is a few
- * decades older: we'll be using the so-called "modified Booth encoding" due to
- * MacSorley ("High-speed arithmetic in binary computers", Proc. IRE, vol. 49
- * (1961), pp. 67-91), in a radix-2^5 setting.  That is, we always combine five
- * signed bits into a signed digit:
- *
- *       s_(4j + 4) s_(4j + 3) s_(4j + 2) s_(4j + 1) s_(4j)
- *
- * The sign-alternating property implies that the resulting digit values are
- * integers from -16 to 16.
- *
- * Of course, we don't actually need to compute the signed digits s_i as an
- * intermediate step (that's just a nice way to see how this scheme relates
- * to the wNAF): a direct computation obtains the recoded digit from the
- * six bits b_(4j + 4) ... b_(4j - 1).
- *
- * This function takes those five bits as an integer (0 .. 63), writing the
- * recoded digit to *sign (0 for positive, 1 for negative) and *digit (absolute
- * value, in the range 0 .. 8).  Note that this integer essentially provides the
- * input bits "shifted to the left" by one position: for example, the input to
- * compute the least significant recoded digit, given that there's no bit b_-1,
- * has to be b_4 b_3 b_2 b_1 b_0 0. */
-void ec_GFp_nistp_recode_scalar_bits(uint8_t *sign, uint8_t *digit,
-                                     uint8_t in) {
-  uint8_t s, d;
-
-  s = ~((in >> 5) - 1); /* sets all bits to MSB(in), 'in' seen as
-                          * 6-bit value */
-  d = (1 << 6) - in - 1;
-  d = (d & s) | (in & ~s);
-  d = (d >> 1) + (d & 1);
-
-  *sign = s & 1;
-  *digit = d;
-}
-
-#endif  /* 64_BIT && !WINDOWS */

data/third_party/boringssl/crypto/ec/wnaf.c

@@ -1,458 +0,0 @@
-/* Originally written by Bodo Moeller for the OpenSSL project.
- * ====================================================================
- * Copyright (c) 1998-2005 The OpenSSL Project.  All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in
- *    the documentation and/or other materials provided with the
- *    distribution.
- *
- * 3. All advertising materials mentioning features or use of this
- *    software must display the following acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit. (http://www.openssl.org/)"
- *
- * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to
- *    endorse or promote products derived from this software without
- *    prior written permission. For written permission, please contact
- *    openssl-core@openssl.org.
- *
- * 5. Products derived from this software may not be called "OpenSSL"
- *    nor may "OpenSSL" appear in their names without prior written
- *    permission of the OpenSSL Project.
- *
- * 6. Redistributions of any form whatsoever must retain the following
- *    acknowledgment:
- *    "This product includes software developed by the OpenSSL Project
- *    for use in the OpenSSL Toolkit (http://www.openssl.org/)"
- *
- * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
- * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE OpenSSL PROJECT OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- * ====================================================================
- *
- * This product includes cryptographic software written by Eric Young
- * (eay@cryptsoft.com).  This product includes software written by Tim
- * Hudson (tjh@cryptsoft.com).
- *
- */
-/* ====================================================================
- * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED.
- *
- * Portions of the attached software ("Contribution") are developed by
- * SUN MICROSYSTEMS, INC., and are contributed to the OpenSSL project.
- *
- * The Contribution is licensed pursuant to the OpenSSL open source
- * license provided above.
- *
- * The elliptic curve binary polynomial software is originally written by
- * Sheueling Chang Shantz and Douglas Stebila of Sun Microsystems
- * Laboratories. */
-
-#include <openssl/ec.h>
-
-#include <string.h>
-
-#include <openssl/bn.h>
-#include <openssl/err.h>
-#include <openssl/mem.h>
-#include <openssl/thread.h>
-
-#include "internal.h"
-#include "../internal.h"
-
-
-/* This file implements the wNAF-based interleaving multi-exponentation method
- * (<URL:http://www.informatik.tu-darmstadt.de/TI/Mitarbeiter/moeller.html#multiexp>);
- * */
-
-/* Determine the modified width-(w+1) Non-Adjacent Form (wNAF) of 'scalar'.
- * This is an array  r[]  of values that are either zero or odd with an
- * absolute value less than  2^w  satisfying
- *     scalar = \sum_j r[j]*2^j
- * where at most one of any  w+1  consecutive digits is non-zero
- * with the exception that the most significant digit may be only
- * w-1 zeros away from that next non-zero digit.
- */
-static int8_t *compute_wNAF(const BIGNUM *scalar, int w, size_t *ret_len) {
-  int window_val;
-  int ok = 0;
-  int8_t *r = NULL;
-  int sign = 1;
-  int bit, next_bit, mask;
-  size_t len = 0, j;
-
-  if (BN_is_zero(scalar)) {
-    r = OPENSSL_malloc(1);
-    if (!r) {
-      OPENSSL_PUT_ERROR(EC, ERR_R_MALLOC_FAILURE);
-      goto err;
-    }
-    r[0] = 0;
-    *ret_len = 1;
-    return r;
-  }
-
-  /* 'int8_t' can represent integers with absolute values less than 2^7. */
-  if (w <= 0 || w > 7) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_INTERNAL_ERROR);
-    goto err;
-  }
-  bit = 1 << w;        /* at most 128 */
-  next_bit = bit << 1; /* at most 256 */
-  mask = next_bit - 1; /* at most 255 */
-
-  if (BN_is_negative(scalar)) {
-    sign = -1;
-  }
-
-  if (scalar->d == NULL || scalar->top == 0) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_INTERNAL_ERROR);
-    goto err;
-  }
-
-  len = BN_num_bits(scalar);
-  /* The modified wNAF may be one digit longer than binary representation
-   * (*ret_len will be set to the actual length, i.e. at most
-   * BN_num_bits(scalar) + 1). */
-  r = OPENSSL_malloc(len + 1);
-  if (r == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_MALLOC_FAILURE);
-    goto err;
-  }
-  window_val = scalar->d[0] & mask;
-  j = 0;
-  /* If j+w+1 >= len, window_val will not increase. */
-  while (window_val != 0 || j + w + 1 < len) {
-    int digit = 0;
-
-    /* 0 <= window_val <= 2^(w+1) */
-
-    if (window_val & 1) {
-      /* 0 < window_val < 2^(w+1) */
-
-      if (window_val & bit) {
-        digit = window_val - next_bit; /* -2^w < digit < 0 */
-
-#if 1 /* modified wNAF */
-        if (j + w + 1 >= len) {
-          /* special case for generating modified wNAFs:
-           * no new bits will be added into window_val,
-           * so using a positive digit here will decrease
-           * the total length of the representation */
-
-          digit = window_val & (mask >> 1); /* 0 < digit < 2^w */
-        }
-#endif
-      } else {
-        digit = window_val; /* 0 < digit < 2^w */
-      }
-
-      if (digit <= -bit || digit >= bit || !(digit & 1)) {
-        OPENSSL_PUT_ERROR(EC, ERR_R_INTERNAL_ERROR);
-        goto err;
-      }
-
-      window_val -= digit;
-
-      /* Now window_val is 0 or 2^(w+1) in standard wNAF generation;
-       * for modified window NAFs, it may also be 2^w. */
-      if (window_val != 0 && window_val != next_bit && window_val != bit) {
-        OPENSSL_PUT_ERROR(EC, ERR_R_INTERNAL_ERROR);
-        goto err;
-      }
-    }
-
-    r[j++] = sign * digit;
-
-    window_val >>= 1;
-    window_val += bit * BN_is_bit_set(scalar, j + w);
-
-    if (window_val > next_bit) {
-      OPENSSL_PUT_ERROR(EC, ERR_R_INTERNAL_ERROR);
-      goto err;
-    }
-  }
-
-  if (j > len + 1) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_INTERNAL_ERROR);
-    goto err;
-  }
-  len = j;
-  ok = 1;
-
-err:
-  if (!ok) {
-    OPENSSL_free(r);
-    r = NULL;
-  }
-  if (ok) {
-    *ret_len = len;
-  }
-  return r;
-}
-
-
-/* TODO: table should be optimised for the wNAF-based implementation,
- *       sometimes smaller windows will give better performance
- *       (thus the boundaries should be increased)
- */
-static size_t window_bits_for_scalar_size(size_t b) {
-  if (b >= 2000) {
-    return 6;
-  }
-
-  if (b >= 800) {
-    return 5;
-  }
-
-  if (b >= 300) {
-    return 4;
-  }
-
-  if (b >= 70) {
-    return 3;
-  }
-
-  if (b >= 20) {
-    return 2;
-  }
-
-  return 1;
-}
-
-int ec_wNAF_mul(const EC_GROUP *group, EC_POINT *r, const BIGNUM *g_scalar,
-                const EC_POINT *p, const BIGNUM *p_scalar, BN_CTX *ctx) {
-  BN_CTX *new_ctx = NULL;
-  const EC_POINT *generator = NULL;
-  EC_POINT *tmp = NULL;
-  size_t total_num = 0;
-  size_t i, j;
-  int k;
-  int r_is_inverted = 0;
-  int r_is_at_infinity = 1;
-  size_t *wsize = NULL;      /* individual window sizes */
-  int8_t **wNAF = NULL; /* individual wNAFs */
-  size_t *wNAF_len = NULL;
-  size_t max_len = 0;
-  size_t num_val = 0;
-  EC_POINT **val = NULL; /* precomputation */
-  EC_POINT **v;
-  EC_POINT ***val_sub = NULL; /* pointers to sub-arrays of 'val' */
-  int ret = 0;
-
-  if (ctx == NULL) {
-    ctx = new_ctx = BN_CTX_new();
-    if (ctx == NULL) {
-      goto err;
-    }
-  }
-
-  /* TODO: This function used to take |points| and |scalars| as arrays of
-   * |num| elements. The code below should be simplified to work in terms of |p|
-   * and |p_scalar|. */
-  size_t num = p != NULL ? 1 : 0;
-  const EC_POINT **points = p != NULL ? &p : NULL;
-  const BIGNUM **scalars = p != NULL ? &p_scalar : NULL;
-
-  total_num = num;
-
-  if (g_scalar != NULL) {
-    generator = EC_GROUP_get0_generator(group);
-    if (generator == NULL) {
-      OPENSSL_PUT_ERROR(EC, EC_R_UNDEFINED_GENERATOR);
-      goto err;
-    }
-
-    ++total_num; /* treat 'g_scalar' like 'num'-th element of 'scalars' */
-  }
-
-
-  wsize = OPENSSL_malloc(total_num * sizeof(wsize[0]));
-  wNAF_len = OPENSSL_malloc(total_num * sizeof(wNAF_len[0]));
-  wNAF = OPENSSL_malloc(total_num * sizeof(wNAF[0]));
-  val_sub = OPENSSL_malloc(total_num * sizeof(val_sub[0]));
-
-  /* Ensure wNAF is initialised in case we end up going to err. */
-  if (wNAF != NULL) {
-    OPENSSL_memset(wNAF, 0, total_num * sizeof(wNAF[0]));
-  }
-
-  if (!wsize || !wNAF_len || !wNAF || !val_sub) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_MALLOC_FAILURE);
-    goto err;
-  }
-
-  /* num_val will be the total number of temporarily precomputed points */
-  num_val = 0;
-
-  for (i = 0; i < total_num; i++) {
-    size_t bits;
-
-    bits = i < num ? BN_num_bits(scalars[i]) : BN_num_bits(g_scalar);
-    wsize[i] = window_bits_for_scalar_size(bits);
-    num_val += (size_t)1 << (wsize[i] - 1);
-    wNAF[i] =
-        compute_wNAF((i < num ? scalars[i] : g_scalar), wsize[i], &wNAF_len[i]);
-    if (wNAF[i] == NULL) {
-      goto err;
-    }
-    if (wNAF_len[i] > max_len) {
-      max_len = wNAF_len[i];
-    }
-  }
-
-  /* All points we precompute now go into a single array 'val'. 'val_sub[i]' is
-   * a pointer to the subarray for the i-th point. */
-  val = OPENSSL_malloc(num_val * sizeof(val[0]));
-  if (val == NULL) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_MALLOC_FAILURE);
-    goto err;
-  }
-  OPENSSL_memset(val, 0, num_val * sizeof(val[0]));
-
-  /* allocate points for precomputation */
-  v = val;
-  for (i = 0; i < total_num; i++) {
-    val_sub[i] = v;
-    for (j = 0; j < ((size_t)1 << (wsize[i] - 1)); j++) {
-      *v = EC_POINT_new(group);
-      if (*v == NULL) {
-        goto err;
-      }
-      v++;
-    }
-  }
-  if (!(v == val + num_val)) {
-    OPENSSL_PUT_ERROR(EC, ERR_R_INTERNAL_ERROR);
-    goto err;
-  }
-
-  if (!(tmp = EC_POINT_new(group))) {
-    goto err;
-  }
-
-  /* prepare precomputed values:
-   *    val_sub[i][0] :=     points[i]
-   *    val_sub[i][1] := 3 * points[i]
-   *    val_sub[i][2] := 5 * points[i]
-   *    ...
-   */
-  for (i = 0; i < total_num; i++) {
-    if (i < num) {
-      if (!EC_POINT_copy(val_sub[i][0], points[i])) {
-        goto err;
-      }
-    } else if (!EC_POINT_copy(val_sub[i][0], generator)) {
-      goto err;
-    }
-
-    if (wsize[i] > 1) {
-      if (!EC_POINT_dbl(group, tmp, val_sub[i][0], ctx)) {
-        goto err;
-      }
-      for (j = 1; j < ((size_t)1 << (wsize[i] - 1)); j++) {
-        if (!EC_POINT_add(group, val_sub[i][j], val_sub[i][j - 1], tmp, ctx)) {
-          goto err;
-        }
-      }
-    }
-  }
-
-#if 1 /* optional; window_bits_for_scalar_size assumes we do this step */
-  if (!EC_POINTs_make_affine(group, num_val, val, ctx)) {
-    goto err;
-  }
-#endif
-
-  r_is_at_infinity = 1;
-
-  for (k = max_len - 1; k >= 0; k--) {
-    if (!r_is_at_infinity && !EC_POINT_dbl(group, r, r, ctx)) {
-      goto err;
-    }
-
-    for (i = 0; i < total_num; i++) {
-      if (wNAF_len[i] > (size_t)k) {
-        int digit = wNAF[i][k];
-        int is_neg;
-
-        if (digit) {
-          is_neg = digit < 0;
-
-          if (is_neg) {
-            digit = -digit;
-          }
-
-          if (is_neg != r_is_inverted) {
-            if (!r_is_at_infinity && !EC_POINT_invert(group, r, ctx)) {
-              goto err;
-            }
-            r_is_inverted = !r_is_inverted;
-          }
-
-          /* digit > 0 */
-
-          if (r_is_at_infinity) {
-            if (!EC_POINT_copy(r, val_sub[i][digit >> 1])) {
-              goto err;
-            }
-            r_is_at_infinity = 0;
-          } else {
-            if (!EC_POINT_add(group, r, r, val_sub[i][digit >> 1], ctx)) {
-              goto err;
-            }
-          }
-        }
-      }
-    }
-  }
-
-  if (r_is_at_infinity) {
-    if (!EC_POINT_set_to_infinity(group, r)) {
-      goto err;
-    }
-  } else if (r_is_inverted && !EC_POINT_invert(group, r, ctx)) {
-    goto err;
-  }
-
-  ret = 1;
-
-err:
-  BN_CTX_free(new_ctx);
-  EC_POINT_free(tmp);
-  OPENSSL_free(wsize);
-  OPENSSL_free(wNAF_len);
-  if (wNAF != NULL) {
-    for (i = 0; i < total_num; i++) {
-      OPENSSL_free(wNAF[i]);
-    }
-
-    OPENSSL_free(wNAF);
-  }
-  if (val != NULL) {
-    for (i = 0; i < num_val; i++) {
-      EC_POINT_clear_free(val[i]);
-    }
-
-    OPENSSL_free(val);
-  }
-  OPENSSL_free(val_sub);
-  return ret;
-}