numpy 1.9.3__zip → 1.10.0__zip

numpy-1.9.3/doc/source/reference/swig.interface-file.rst

@@ -1,1055 +0,0 @@
-Numpy.i: a SWIG Interface File for NumPy
-========================================
-
-Introduction
-------------
-
-The Simple Wrapper and Interface Generator (or `SWIG
-<http://www.swig.org>`_) is a powerful tool for generating wrapper
-code for interfacing to a wide variety of scripting languages.
-`SWIG`_ can parse header files, and using only the code prototypes,
-create an interface to the target language.  But `SWIG`_ is not
-omnipotent.  For example, it cannot know from the prototype::
-
-    double rms(double* seq, int n);
-
-what exactly ``seq`` is.  Is it a single value to be altered in-place?
-Is it an array, and if so what is its length?  Is it input-only?
-Output-only?  Input-output?  `SWIG`_ cannot determine these details,
-and does not attempt to do so.
-
-If we designed ``rms``, we probably made it a routine that takes an
-input-only array of length ``n`` of ``double`` values called ``seq``
-and returns the root mean square.  The default behavior of `SWIG`_,
-however, will be to create a wrapper function that compiles, but is
-nearly impossible to use from the scripting language in the way the C
-routine was intended.
-
-For Python, the preferred way of handling contiguous (or technically,
-*strided*) blocks of homogeneous data is with NumPy, which provides full
-object-oriented access to multidimensial arrays of data.  Therefore, the most
-logical Python interface for the ``rms`` function would be (including doc
-string)::
-
-    def rms(seq):
-        """
-        rms: return the root mean square of a sequence
-        rms(numpy.ndarray) -> double
-        rms(list) -> double
-        rms(tuple) -> double
-        """
-
-where ``seq`` would be a NumPy array of ``double`` values, and its
-length ``n`` would be extracted from ``seq`` internally before being
-passed to the C routine.  Even better, since NumPy supports
-construction of arrays from arbitrary Python sequences, ``seq``
-itself could be a nearly arbitrary sequence (so long as each element
-can be converted to a ``double``) and the wrapper code would
-internally convert it to a NumPy array before extracting its data
-and length.
-
-`SWIG`_ allows these types of conversions to be defined via a
-mechanism called *typemaps*.  This document provides information on
-how to use ``numpy.i``, a `SWIG`_ interface file that defines a series
-of typemaps intended to make the type of array-related conversions
-described above relatively simple to implement.  For example, suppose
-that the ``rms`` function prototype defined above was in a header file
-named ``rms.h``.  To obtain the Python interface discussed above, your
-`SWIG`_ interface file would need the following::
-
-    %{
-    #define SWIG_FILE_WITH_INIT
-    #include "rms.h"
-    %}
-
-    %include "numpy.i"
-
-    %init %{
-    import_array();
-    %}
-
-    %apply (double* IN_ARRAY1, int DIM1) {(double* seq, int n)};
-    %include "rms.h"
-
-Typemaps are keyed off a list of one or more function arguments,
-either by type or by type and name.  We will refer to such lists as
-*signatures*.  One of the many typemaps defined by ``numpy.i`` is used
-above and has the signature ``(double* IN_ARRAY1, int DIM1)``.  The
-argument names are intended to suggest that the ``double*`` argument
-is an input array of one dimension and that the ``int`` represents the
-size of that dimension.  This is precisely the pattern in the ``rms``
-prototype.
-
-Most likely, no actual prototypes to be wrapped will have the argument
-names ``IN_ARRAY1`` and ``DIM1``.  We use the `SWIG`_ ``%apply``
-directive to apply the typemap for one-dimensional input arrays of
-type ``double`` to the actual prototype used by ``rms``.  Using
-``numpy.i`` effectively, therefore, requires knowing what typemaps are
-available and what they do.
-
-A `SWIG`_ interface file that includes the `SWIG`_ directives given
-above will produce wrapper code that looks something like::
-
-     1 PyObject *_wrap_rms(PyObject *args) {
-     2   PyObject *resultobj = 0;
-     3   double *arg1 = (double *) 0 ;
-     4   int arg2 ;
-     5   double result;
-     6   PyArrayObject *array1 = NULL ;
-     7   int is_new_object1 = 0 ;
-     8   PyObject * obj0 = 0 ;
-     9
-    10   if (!PyArg_ParseTuple(args,(char *)"O:rms",&obj0)) SWIG_fail;
-    11   {
-    12     array1 = obj_to_array_contiguous_allow_conversion(
-    13                  obj0, NPY_DOUBLE, &is_new_object1);
-    14     npy_intp size[1] = {
-    15       -1
-    16     };
-    17     if (!array1 || !require_dimensions(array1, 1) ||
-    18         !require_size(array1, size, 1)) SWIG_fail;
-    19     arg1 = (double*) array1->data;
-    20     arg2 = (int) array1->dimensions[0];
-    21   }
-    22   result = (double)rms(arg1,arg2);
-    23   resultobj = SWIG_From_double((double)(result));
-    24   {
-    25     if (is_new_object1 && array1) Py_DECREF(array1);
-    26   }
-    27   return resultobj;
-    28 fail:
-    29   {
-    30     if (is_new_object1 && array1) Py_DECREF(array1);
-    31   }
-    32   return NULL;
-    33 }
-
-The typemaps from ``numpy.i`` are responsible for the following lines
-of code: 12--20, 25 and 30.  Line 10 parses the input to the ``rms``
-function.  From the format string ``"O:rms"``, we can see that the
-argument list is expected to be a single Python object (specified
-by the ``O`` before the colon) and whose pointer is stored in
-``obj0``.  A number of functions, supplied by ``numpy.i``, are called
-to make and check the (possible) conversion from a generic Python
-object to a NumPy array.  These functions are explained in the
-section `Helper Functions`_, but hopefully their names are
-self-explanatory.  At line 12 we use ``obj0`` to construct a NumPy
-array.  At line 17, we check the validity of the result: that it is
-non-null and that it has a single dimension of arbitrary length.  Once
-these states are verified, we extract the data buffer and length in
-lines 19 and 20 so that we can call the underlying C function at line
-22.  Line 25 performs memory management for the case where we have
-created a new array that is no longer needed.
-
-This code has a significant amount of error handling.  Note the
-``SWIG_fail`` is a macro for ``goto fail``, refering to the label at
-line 28.  If the user provides the wrong number of arguments, this
-will be caught at line 10.  If construction of the NumPy array
-fails or produces an array with the wrong number of dimensions, these
-errors are caught at line 17.  And finally, if an error is detected,
-memory is still managed correctly at line 30.
-
-Note that if the C function signature was in a different order::
-
-    double rms(int n, double* seq);
-
-that `SWIG`_ would not match the typemap signature given above with
-the argument list for ``rms``.  Fortunately, ``numpy.i`` has a set of
-typemaps with the data pointer given last::
-
-    %apply (int DIM1, double* IN_ARRAY1) {(int n, double* seq)};
-
-This simply has the effect of switching the definitions of ``arg1``
-and ``arg2`` in lines 3 and 4 of the generated code above, and their
-assignments in lines 19 and 20.
-
-Using numpy.i
--------------
-
-The ``numpy.i`` file is currently located in the ``tools/swig``
-sub-directory under the ``numpy`` installation directory.  Typically,
-you will want to copy it to the directory where you are developing
-your wrappers.
-
-A simple module that only uses a single `SWIG`_ interface file should
-include the following::
-
-    %{
-    #define SWIG_FILE_WITH_INIT
-    %}
-    %include "numpy.i"
-    %init %{
-    import_array();
-    %}
-
-Within a compiled Python module, ``import_array()`` should only get
-called once.  This could be in a C/C++ file that you have written and
-is linked to the module.  If this is the case, then none of your
-interface files should ``#define SWIG_FILE_WITH_INIT`` or call
-``import_array()``.  Or, this initialization call could be in a
-wrapper file generated by `SWIG`_ from an interface file that has the
-``%init`` block as above.  If this is the case, and you have more than
-one `SWIG`_ interface file, then only one interface file should
-``#define SWIG_FILE_WITH_INIT`` and call ``import_array()``.
-
-Available Typemaps
-------------------
-
-The typemap directives provided by ``numpy.i`` for arrays of different
-data types, say ``double`` and ``int``, and dimensions of different
-types, say ``int`` or ``long``, are identical to one another except
-for the C and NumPy type specifications.  The typemaps are
-therefore implemented (typically behind the scenes) via a macro::
-
-    %numpy_typemaps(DATA_TYPE, DATA_TYPECODE, DIM_TYPE)
-
-that can be invoked for appropriate ``(DATA_TYPE, DATA_TYPECODE,
-DIM_TYPE)`` triplets.  For example::
-
-    %numpy_typemaps(double, NPY_DOUBLE, int)
-    %numpy_typemaps(int,    NPY_INT   , int)
-
-The ``numpy.i`` interface file uses the ``%numpy_typemaps`` macro to
-implement typemaps for the following C data types and ``int``
-dimension types:
-
-  * ``signed char``
-  * ``unsigned char``
-  * ``short``
-  * ``unsigned short``
-  * ``int``
-  * ``unsigned int``
-  * ``long``
-  * ``unsigned long``
-  * ``long long``
-  * ``unsigned long long``
-  * ``float``
-  * ``double``
-
-In the following descriptions, we reference a generic ``DATA_TYPE``, which
-could be any of the C data types listed above, and ``DIM_TYPE`` which
-should be one of the many types of integers.
-
-The typemap signatures are largely differentiated on the name given to
-the buffer pointer.  Names with ``FARRAY`` are for Fortran-ordered
-arrays, and names with ``ARRAY`` are for C-ordered (or 1D arrays).
-
-Input Arrays
-````````````
-
-Input arrays are defined as arrays of data that are passed into a
-routine but are not altered in-place or returned to the user.  The
-Python input array is therefore allowed to be almost any Python
-sequence (such as a list) that can be converted to the requested type
-of array.  The input array signatures are
-
-1D:
-
-  * ``(	DATA_TYPE IN_ARRAY1[ANY] )``
-  * ``(	DATA_TYPE* IN_ARRAY1, int DIM1 )``
-  * ``(	int DIM1, DATA_TYPE* IN_ARRAY1 )``
-
-2D:
-
-  * ``(	DATA_TYPE IN_ARRAY2[ANY][ANY] )``
-  * ``(	DATA_TYPE* IN_ARRAY2, int DIM1, int DIM2 )``
-  * ``(	int DIM1, int DIM2, DATA_TYPE* IN_ARRAY2 )``
-  * ``(	DATA_TYPE* IN_FARRAY2, int DIM1, int DIM2 )``
-  * ``(	int DIM1, int DIM2, DATA_TYPE* IN_FARRAY2 )``
-
-3D:
-
-  * ``(	DATA_TYPE IN_ARRAY3[ANY][ANY][ANY] )``
-  * ``(	DATA_TYPE* IN_ARRAY3, int DIM1, int DIM2, int DIM3 )``
-  * ``(	int DIM1, int DIM2, int DIM3, DATA_TYPE* IN_ARRAY3 )``
-  * ``(	DATA_TYPE* IN_FARRAY3, int DIM1, int DIM2, int DIM3 )``
-  * ``(	int DIM1, int DIM2, int DIM3, DATA_TYPE* IN_FARRAY3 )``
-
-4D:
-
-  * ``(DATA_TYPE IN_ARRAY4[ANY][ANY][ANY][ANY])``
-  * ``(DATA_TYPE* IN_ARRAY4, DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, DIM_TYPE DIM4)``
-  * ``(DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, , DIM_TYPE DIM4, DATA_TYPE* IN_ARRAY4)``
-  * ``(DATA_TYPE* IN_FARRAY4, DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, DIM_TYPE DIM4)``
-  * ``(DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, DIM_TYPE DIM4, DATA_TYPE* IN_FARRAY4)``
-
-The first signature listed, ``( DATA_TYPE IN_ARRAY[ANY] )`` is for
-one-dimensional arrays with hard-coded dimensions.  Likewise,
-``( DATA_TYPE IN_ARRAY2[ANY][ANY] )`` is for two-dimensional arrays
-with hard-coded dimensions, and similarly for three-dimensional.
-
-In-Place Arrays
-```````````````
-
-In-place arrays are defined as arrays that are modified in-place.  The
-input values may or may not be used, but the values at the time the
-function returns are significant.  The provided Python argument
-must therefore be a NumPy array of the required type.  The in-place
-signatures are
-
-1D:
-
-  * ``(	DATA_TYPE INPLACE_ARRAY1[ANY] )``
-  * ``(	DATA_TYPE* INPLACE_ARRAY1, int DIM1 )``
-  * ``(	int DIM1, DATA_TYPE* INPLACE_ARRAY1 )``
-
-2D:
-
-  * ``(	DATA_TYPE INPLACE_ARRAY2[ANY][ANY] )``
-  * ``(	DATA_TYPE* INPLACE_ARRAY2, int DIM1, int DIM2 )``
-  * ``(	int DIM1, int DIM2, DATA_TYPE* INPLACE_ARRAY2 )``
-  * ``(	DATA_TYPE* INPLACE_FARRAY2, int DIM1, int DIM2 )``
-  * ``(	int DIM1, int DIM2, DATA_TYPE* INPLACE_FARRAY2 )``
-
-3D:
-
-  * ``(	DATA_TYPE INPLACE_ARRAY3[ANY][ANY][ANY] )``
-  * ``(	DATA_TYPE* INPLACE_ARRAY3, int DIM1, int DIM2, int DIM3 )``
-  * ``(	int DIM1, int DIM2, int DIM3, DATA_TYPE* INPLACE_ARRAY3 )``
-  * ``(	DATA_TYPE* INPLACE_FARRAY3, int DIM1, int DIM2, int DIM3 )``
-  * ``(	int DIM1, int DIM2, int DIM3, DATA_TYPE* INPLACE_FARRAY3 )``
-
-4D:
-
-  * ``(DATA_TYPE INPLACE_ARRAY4[ANY][ANY][ANY][ANY])``
-  * ``(DATA_TYPE* INPLACE_ARRAY4, DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, DIM_TYPE DIM4)``
-  * ``(DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, , DIM_TYPE DIM4, DATA_TYPE* INPLACE_ARRAY4)``
-  * ``(DATA_TYPE* INPLACE_FARRAY4, DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, DIM_TYPE DIM4)``
-  * ``(DIM_TYPE DIM1, DIM_TYPE DIM2, DIM_TYPE DIM3, DIM_TYPE DIM4, DATA_TYPE* INPLACE_FARRAY4)``
-
-These typemaps now check to make sure that the ``INPLACE_ARRAY``
-arguments use native byte ordering.  If not, an exception is raised.
-
-Argout Arrays
-`````````````
-
-Argout arrays are arrays that appear in the input arguments in C, but
-are in fact output arrays.  This pattern occurs often when there is
-more than one output variable and the single return argument is
-therefore not sufficient.  In Python, the convential way to return
-multiple arguments is to pack them into a sequence (tuple, list, etc.)
-and return the sequence.  This is what the argout typemaps do.  If a
-wrapped function that uses these argout typemaps has more than one
-return argument, they are packed into a tuple or list, depending on
-the version of Python.  The Python user does not pass these
-arrays in, they simply get returned.  For the case where a dimension
-is specified, the python user must provide that dimension as an
-argument.  The argout signatures are
-
-1D:
-
-  * ``(	DATA_TYPE ARGOUT_ARRAY1[ANY] )``
-  * ``(	DATA_TYPE* ARGOUT_ARRAY1, int DIM1 )``
-  * ``(	int DIM1, DATA_TYPE* ARGOUT_ARRAY1 )``
-
-2D:
-
-  * ``(	DATA_TYPE ARGOUT_ARRAY2[ANY][ANY] )``
-
-3D:
-
-  * ``(	DATA_TYPE ARGOUT_ARRAY3[ANY][ANY][ANY] )``
-
-4D:
-
-  * ``(	DATA_TYPE ARGOUT_ARRAY4[ANY][ANY][ANY][ANY] )``
-
-These are typically used in situations where in C/C++, you would
-allocate a(n) array(s) on the heap, and call the function to fill the
-array(s) values.  In Python, the arrays are allocated for you and
-returned as new array objects.
-
-Note that we support ``DATA_TYPE*`` argout typemaps in 1D, but not 2D
-or 3D.  This is because of a quirk with the `SWIG`_ typemap syntax and
-cannot be avoided.  Note that for these types of 1D typemaps, the
-Python function will take a single argument representing ``DIM1``.
-
-Argout View Arrays
-``````````````````
-
-Argoutview arrays are for when your C code provides you with a view of
-its internal data and does not require any memory to be allocated by
-the user.  This can be dangerous.  There is almost no way to guarantee
-that the internal data from the C code will remain in existence for
-the entire lifetime of the NumPy array that encapsulates it.  If
-the user destroys the object that provides the view of the data before
-destroying the NumPy array, then using that array may result in bad
-memory references or segmentation faults.  Nevertheless, there are
-situations, working with large data sets, where you simply have no
-other choice.
-
-The C code to be wrapped for argoutview arrays are characterized by
-pointers: pointers to the dimensions and double pointers to the data,
-so that these values can be passed back to the user.  The argoutview
-typemap signatures are therefore
-
-1D:
-
-  * ``( DATA_TYPE** ARGOUTVIEW_ARRAY1, DIM_TYPE* DIM1 )``
-  * ``( DIM_TYPE* DIM1, DATA_TYPE** ARGOUTVIEW_ARRAY1 )``
-
-2D:
-
-  * ``( DATA_TYPE** ARGOUTVIEW_ARRAY2, DIM_TYPE* DIM1, DIM_TYPE* DIM2 )``
-  * ``( DIM_TYPE* DIM1, DIM_TYPE* DIM2, DATA_TYPE** ARGOUTVIEW_ARRAY2 )``
-  * ``( DATA_TYPE** ARGOUTVIEW_FARRAY2, DIM_TYPE* DIM1, DIM_TYPE* DIM2 )``
-  * ``( DIM_TYPE* DIM1, DIM_TYPE* DIM2, DATA_TYPE** ARGOUTVIEW_FARRAY2 )``
-
-3D:
-
-  * ``( DATA_TYPE** ARGOUTVIEW_ARRAY3, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3)``
-  * ``( DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DATA_TYPE** ARGOUTVIEW_ARRAY3)``
-  * ``( DATA_TYPE** ARGOUTVIEW_FARRAY3, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3)``
-  * ``( DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DATA_TYPE** ARGOUTVIEW_FARRAY3)``
-
-4D:
-
-  * ``(DATA_TYPE** ARGOUTVIEW_ARRAY4, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4, DATA_TYPE** ARGOUTVIEW_ARRAY4)``
-  * ``(DATA_TYPE** ARGOUTVIEW_FARRAY4, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4, DATA_TYPE** ARGOUTVIEW_FARRAY4)``
-
-Note that arrays with hard-coded dimensions are not supported.  These
-cannot follow the double pointer signatures of these typemaps.
-
-Memory Managed Argout View Arrays
-`````````````````````````````````
-
-A recent addition to ``numpy.i`` are typemaps that permit argout
-arrays with views into memory that is managed.  See the discussion `here
-<http://blog.enthought.com/python/numpy-arrays-with-pre-allocated-memory>`_.
-
-1D:
-
-  * ``(DATA_TYPE** ARGOUTVIEWM_ARRAY1, DIM_TYPE* DIM1)``
-  * ``(DIM_TYPE* DIM1, DATA_TYPE** ARGOUTVIEWM_ARRAY1)``
-
-2D:
-
-  * ``(DATA_TYPE** ARGOUTVIEWM_ARRAY2, DIM_TYPE* DIM1, DIM_TYPE* DIM2)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DATA_TYPE** ARGOUTVIEWM_ARRAY2)``
-  * ``(DATA_TYPE** ARGOUTVIEWM_FARRAY2, DIM_TYPE* DIM1, DIM_TYPE* DIM2)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DATA_TYPE** ARGOUTVIEWM_FARRAY2)``
-
-3D:
-
-  * ``(DATA_TYPE** ARGOUTVIEWM_ARRAY3, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DATA_TYPE** ARGOUTVIEWM_ARRAY3)``
-  * ``(DATA_TYPE** ARGOUTVIEWM_FARRAY3, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DATA_TYPE** ARGOUTVIEWM_FARRAY3)``
-
-4D:
-
-  * ``(DATA_TYPE** ARGOUTVIEWM_ARRAY4, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4, DATA_TYPE** ARGOUTVIEWM_ARRAY4)``
-  * ``(DATA_TYPE** ARGOUTVIEWM_FARRAY4, DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4)``
-  * ``(DIM_TYPE* DIM1, DIM_TYPE* DIM2, DIM_TYPE* DIM3, DIM_TYPE* DIM4, DATA_TYPE** ARGOUTVIEWM_FARRAY4)``
-
-
-Output Arrays
-`````````````
-
-The ``numpy.i`` interface file does not support typemaps for output
-arrays, for several reasons.  First, C/C++ return arguments are
-limited to a single value.  This prevents obtaining dimension
-information in a general way.  Second, arrays with hard-coded lengths
-are not permitted as return arguments.  In other words::
-
-    double[3] newVector(double x, double y, double z);
-
-is not legal C/C++ syntax.  Therefore, we cannot provide typemaps of
-the form::
-
-    %typemap(out) (TYPE[ANY]);
-
-If you run into a situation where a function or method is returning a
-pointer to an array, your best bet is to write your own version of the
-function to be wrapped, either with ``%extend`` for the case of class
-methods or ``%ignore`` and ``%rename`` for the case of functions.
-
-Other Common Types: bool
-````````````````````````
-
-Note that C++ type ``bool`` is not supported in the list in the
-`Available Typemaps`_ section.  NumPy bools are a single byte, while
-the C++ ``bool`` is four bytes (at least on my system).  Therefore::
-
-    %numpy_typemaps(bool, NPY_BOOL, int)
-
-will result in typemaps that will produce code that reference
-improper data lengths.  You can implement the following macro
-expansion::
-
-    %numpy_typemaps(bool, NPY_UINT, int)
-
-to fix the data length problem, and `Input Arrays`_ will work fine,
-but `In-Place Arrays`_ might fail type-checking.
-
-Other Common Types: complex
-```````````````````````````
-
-Typemap conversions for complex floating-point types is also not
-supported automatically.  This is because Python and NumPy are
-written in C, which does not have native complex types.  Both
-Python and NumPy implement their own (essentially equivalent)
-``struct`` definitions for complex variables::
-
-    /* Python */
-    typedef struct {double real; double imag;} Py_complex;
-
-    /* NumPy */
-    typedef struct {float  real, imag;} npy_cfloat;
-    typedef struct {double real, imag;} npy_cdouble;
-
-We could have implemented::
-
-    %numpy_typemaps(Py_complex , NPY_CDOUBLE, int)
-    %numpy_typemaps(npy_cfloat , NPY_CFLOAT , int)
-    %numpy_typemaps(npy_cdouble, NPY_CDOUBLE, int)
-
-which would have provided automatic type conversions for arrays of
-type ``Py_complex``, ``npy_cfloat`` and ``npy_cdouble``.  However, it
-seemed unlikely that there would be any independent (non-Python,
-non-NumPy) application code that people would be using `SWIG`_ to
-generate a Python interface to, that also used these definitions
-for complex types.  More likely, these application codes will define
-their own complex types, or in the case of C++, use ``std::complex``.
-Assuming these data structures are compatible with Python and
-NumPy complex types, ``%numpy_typemap`` expansions as above (with
-the user's complex type substituted for the first argument) should
-work.
-
-NumPy Array Scalars and SWIG
-----------------------------
-
-`SWIG`_ has sophisticated type checking for numerical types.  For
-example, if your C/C++ routine expects an integer as input, the code
-generated by `SWIG`_ will check for both Python integers and
-Python long integers, and raise an overflow error if the provided
-Python integer is too big to cast down to a C integer.  With the
-introduction of NumPy scalar arrays into your Python code, you
-might conceivably extract an integer from a NumPy array and attempt
-to pass this to a `SWIG`_-wrapped C/C++ function that expects an
-``int``, but the `SWIG`_ type checking will not recognize the NumPy
-array scalar as an integer.  (Often, this does in fact work -- it
-depends on whether NumPy recognizes the integer type you are using
-as inheriting from the Python integer type on the platform you are
-using.  Sometimes, this means that code that works on a 32-bit machine
-will fail on a 64-bit machine.)
-
-If you get a Python error that looks like the following::
-
-    TypeError: in method 'MyClass_MyMethod', argument 2 of type 'int'
-
-and the argument you are passing is an integer extracted from a
-NumPy array, then you have stumbled upon this problem.  The
-solution is to modify the `SWIG`_ type conversion system to accept
-Numpy array scalars in addition to the standard integer types.
-Fortunately, this capabilitiy has been provided for you.  Simply copy
-the file::
-
-    pyfragments.swg
-
-to the working build directory for you project, and this problem will
-be fixed.  It is suggested that you do this anyway, as it only
-increases the capabilities of your Python interface.
-
-Why is There a Second File?
-```````````````````````````
-
-The `SWIG`_ type checking and conversion system is a complicated
-combination of C macros, `SWIG`_ macros, `SWIG`_ typemaps and `SWIG`_
-fragments.  Fragments are a way to conditionally insert code into your
-wrapper file if it is needed, and not insert it if not needed.  If
-multiple typemaps require the same fragment, the fragment only gets
-inserted into your wrapper code once.
-
-There is a fragment for converting a Python integer to a C
-``long``.  There is a different fragment that converts a Python
-integer to a C ``int``, that calls the rountine defined in the
-``long`` fragment.  We can make the changes we want here by changing
-the definition for the ``long`` fragment.  `SWIG`_ determines the
-active definition for a fragment using a "first come, first served"
-system.  That is, we need to define the fragment for ``long``
-conversions prior to `SWIG`_ doing it internally.  `SWIG`_ allows us
-to do this by putting our fragment definitions in the file
-``pyfragments.swg``.  If we were to put the new fragment definitions
-in ``numpy.i``, they would be ignored.
-
-Helper Functions
-----------------
-
-The ``numpy.i`` file containes several macros and routines that it
-uses internally to build its typemaps.  However, these functions may
-be useful elsewhere in your interface file.  These macros and routines
-are implemented as fragments, which are described briefly in the
-previous section.  If you try to use one or more of the following
-macros or functions, but your compiler complains that it does not
-recognize the symbol, then you need to force these fragments to appear
-in your code using::
-
-    %fragment("NumPy_Fragments");
-
-in your `SWIG`_ interface file.
-
-Macros
-``````
-
-  **is_array(a)**
-    Evaluates as true if ``a`` is non-``NULL`` and can be cast to a
-    ``PyArrayObject*``.
-
-  **array_type(a)**
-    Evaluates to the integer data type code of ``a``, assuming ``a`` can
-    be cast to a ``PyArrayObject*``.
-
-  **array_numdims(a)**
-    Evaluates to the integer number of dimensions of ``a``, assuming
-    ``a`` can be cast to a ``PyArrayObject*``.
-
-  **array_dimensions(a)**
-    Evaluates to an array of type ``npy_intp`` and length
-    ``array_numdims(a)``, giving the lengths of all of the dimensions
-    of ``a``, assuming ``a`` can be cast to a ``PyArrayObject*``.
-
-  **array_size(a,i)**
-    Evaluates to the ``i``-th dimension size of ``a``, assuming ``a``
-    can be cast to a ``PyArrayObject*``.
-
-  **array_strides(a)**
-    Evaluates to an array of type ``npy_intp`` and length
-    ``array_numdims(a)``, giving the stridess of all of the dimensions
-    of ``a``, assuming ``a`` can be cast to a ``PyArrayObject*``.  A
-    stride is the distance in bytes between an element and its
-    immediate neighbor along the same axis.
-
-  **array_stride(a,i)**
-    Evaluates to the ``i``-th stride of ``a``, assuming ``a`` can be
-    cast to a ``PyArrayObject*``.
-
-  **array_data(a)**
-    Evaluates to a pointer of type ``void*`` that points to the data
-    buffer of ``a``, assuming ``a`` can be cast to a ``PyArrayObject*``.
-
-  **array_descr(a)**
-    Returns a borrowed reference to the dtype property
-    (``PyArray_Descr*``) of ``a``, assuming ``a`` can be cast to a
-    ``PyArrayObject*``.
-
-  **array_flags(a)**
-    Returns an integer representing the flags of ``a``, assuming ``a``
-    can be cast to a ``PyArrayObject*``.
-
-  **array_enableflags(a,f)**
-    Sets the flag represented by ``f`` of ``a``, assuming ``a`` can be
-    cast to a ``PyArrayObject*``.
-
-  **array_is_contiguous(a)**
-    Evaluates as true if ``a`` is a contiguous array.  Equivalent to
-    ``(PyArray_ISCONTIGUOUS(a))``.
-
-  **array_is_native(a)**
-    Evaluates as true if the data buffer of ``a`` uses native byte
-    order.  Equivalent to ``(PyArray_ISNOTSWAPPED(a))``.
-
-  **array_is_fortran(a)**
-    Evaluates as true if ``a`` is FORTRAN ordered.
-
-Routines
-````````
-
-  **pytype_string()**
-
-    Return type: ``const char*``
-
-    Arguments:
-
-    * ``PyObject* py_obj``, a general Python object.
-
-    Return a string describing the type of ``py_obj``.
-
-
-  **typecode_string()**
-
-    Return type: ``const char*``
-
-    Arguments:
-
-    * ``int typecode``, a NumPy integer typecode.
-
-    Return a string describing the type corresponding to the NumPy
-    ``typecode``.
-
-  **type_match()**
-
-    Return type: ``int``
-
-    Arguments:
-
-    * ``int actual_type``, the NumPy typecode of a NumPy array.
-
-    * ``int desired_type``, the desired NumPy typecode.
-
-    Make sure that ``actual_type`` is compatible with
-    ``desired_type``.  For example, this allows character and
-    byte types, or int and long types, to match.  This is now
-    equivalent to ``PyArray_EquivTypenums()``.
-
-
-  **obj_to_array_no_conversion()**
-
-    Return type: ``PyArrayObject*``
-
-    Arguments:
-
-    * ``PyObject* input``, a general Python object.
-
-    * ``int typecode``, the desired NumPy typecode.
-
-    Cast ``input`` to a ``PyArrayObject*`` if legal, and ensure that
-    it is of type ``typecode``.  If ``input`` cannot be cast, or the
-    ``typecode`` is wrong, set a Python error and return ``NULL``.
-
-
-  **obj_to_array_allow_conversion()**
-
-    Return type: ``PyArrayObject*``
-
-    Arguments:
-
-    * ``PyObject* input``, a general Python object.
-
-    * ``int typecode``, the desired NumPy typecode of the resulting
-      array.
-
-    * ``int* is_new_object``, returns a value of 0 if no conversion
-      performed, else 1.
-
-    Convert ``input`` to a NumPy array with the given ``typecode``.
-    On success, return a valid ``PyArrayObject*`` with the correct
-    type.  On failure, the Python error string will be set and the
-    routine returns ``NULL``.
-
-
-  **make_contiguous()**
-
-    Return type: ``PyArrayObject*``
-
-    Arguments:
-
-    * ``PyArrayObject* ary``, a NumPy array.
-
-    * ``int* is_new_object``, returns a value of 0 if no conversion
-      performed, else 1.
-
-    * ``int min_dims``, minimum allowable dimensions.
-
-    * ``int max_dims``, maximum allowable dimensions.
-
-    Check to see if ``ary`` is contiguous.  If so, return the input
-    pointer and flag it as not a new object.  If it is not contiguous,
-    create a new ``PyArrayObject*`` using the original data, flag it
-    as a new object and return the pointer.
-
-
-  **make_fortran()**
-
-    Return type: ``PyArrayObject*``
-
-    Arguments
-
-    * ``PyArrayObject* ary``, a NumPy array.
-
-    * ``int* is_new_object``, returns a value of 0 if no conversion
-      performed, else 1.
-
-    Check to see if ``ary`` is Fortran contiguous.  If so, return the
-    input pointer and flag it as not a new object.  If it is not
-    Fortran contiguous, create a new ``PyArrayObject*`` using the
-    original data, flag it as a new object and return the pointer.
-
-
-  **obj_to_array_contiguous_allow_conversion()**
-
-    Return type: ``PyArrayObject*``
-
-    Arguments:
-
-    * ``PyObject* input``, a general Python object.
-
-    * ``int typecode``, the desired NumPy typecode of the resulting
-      array.
-
-    * ``int* is_new_object``, returns a value of 0 if no conversion
-      performed, else 1.
-
-    Convert ``input`` to a contiguous ``PyArrayObject*`` of the
-    specified type.  If the input object is not a contiguous
-    ``PyArrayObject*``, a new one will be created and the new object
-    flag will be set.
-
-
-  **obj_to_array_fortran_allow_conversion()**
-
-    Return type: ``PyArrayObject*``
-
-    Arguments:
-
-    * ``PyObject* input``, a general Python object.
-
-    * ``int typecode``, the desired NumPy typecode of the resulting
-      array.
-
-    * ``int* is_new_object``, returns a value of 0 if no conversion
-      performed, else 1.
-
-    Convert ``input`` to a Fortran contiguous ``PyArrayObject*`` of
-    the specified type.  If the input object is not a Fortran
-    contiguous ``PyArrayObject*``, a new one will be created and the
-    new object flag will be set.
-
-
-  **require_contiguous()**
-
-    Return type: ``int``
-
-    Arguments:
-
-    * ``PyArrayObject* ary``, a NumPy array.
-
-    Test whether ``ary`` is contiguous.  If so, return 1.  Otherwise,
-    set a Python error and return 0.
-
-
-  **require_native()**
-
-    Return type: ``int``
-
-    Arguments:
-
-    * ``PyArray_Object* ary``, a NumPy array.
-
-    Require that ``ary`` is not byte-swapped.  If the array is not
-    byte-swapped, return 1.  Otherwise, set a Python error and
-    return 0.
-
-  **require_dimensions()**
-
-    Return type: ``int``
-
-    Arguments:
-
-    * ``PyArrayObject* ary``, a NumPy array.
-
-    * ``int exact_dimensions``, the desired number of dimensions.
-
-    Require ``ary`` to have a specified number of dimensions.  If the
-    array has the specified number of dimensions, return 1.
-    Otherwise, set a Python error and return 0.
-
-
-  **require_dimensions_n()**
-
-    Return type: ``int``
-
-    Arguments:
-
-    * ``PyArrayObject* ary``, a NumPy array.
-
-    * ``int* exact_dimensions``, an array of integers representing
-      acceptable numbers of dimensions.
-
-    * ``int n``, the length of ``exact_dimensions``.
-
-    Require ``ary`` to have one of a list of specified number of
-    dimensions.  If the array has one of the specified number of
-    dimensions, return 1.  Otherwise, set the Python error string
-    and return 0.
-
-
-  **require_size()**
-
-    Return type: ``int``
-
-    Arguments:
-
-    * ``PyArrayObject* ary``, a NumPy array.
-
-    * ``npy_int* size``, an array representing the desired lengths of
-      each dimension.
-
-    * ``int n``, the length of ``size``.
-
-    Require ``ary`` to have a specified shape.  If the array has the
-    specified shape, return 1.  Otherwise, set the Python error
-    string and return 0.
-
-
-  **require_fortran()**
-
-    Return type: ``int``
-
-    Arguments:
-
-    * ``PyArrayObject* ary``, a NumPy array.
-
-    Require the given ``PyArrayObject`` to to be Fortran ordered.  If
-    the the ``PyArrayObject`` is already Fortran ordered, do nothing.
-    Else, set the Fortran ordering flag and recompute the strides.
-
-
-Beyond the Provided Typemaps
-----------------------------
-
-There are many C or C++ array/NumPy array situations not covered by
-a simple ``%include "numpy.i"`` and subsequent ``%apply`` directives.
-
-A Common Example
-````````````````
-
-Consider a reasonable prototype for a dot product function::
-
-    double dot(int len, double* vec1, double* vec2);
-
-The Python interface that we want is::
-
-    def dot(vec1, vec2):
-        """
-        dot(PyObject,PyObject) -> double
-        """
-
-The problem here is that there is one dimension argument and two array
-arguments, and our typemaps are set up for dimensions that apply to a
-single array (in fact, `SWIG`_ does not provide a mechanism for
-associating ``len`` with ``vec2`` that takes two Python input
-arguments).  The recommended solution is the following::
-
-    %apply (int DIM1, double* IN_ARRAY1) {(int len1, double* vec1),
-                                          (int len2, double* vec2)}
-    %rename (dot) my_dot;
-    %exception my_dot {
-        $action
-	if (PyErr_Occurred()) SWIG_fail;
-    }
-    %inline %{
-    double my_dot(int len1, double* vec1, int len2, double* vec2) {
-        if (len1 != len2) {
-	    PyErr_Format(PyExc_ValueError,
-                         "Arrays of lengths (%d,%d) given",
-                         len1, len2);
-	    return 0.0;
-        }
-        return dot(len1, vec1, vec2);
-    }
-    %}
-
-If the header file that contains the prototype for ``double dot()``
-also contains other prototypes that you want to wrap, so that you need
-to ``%include`` this header file, then you will also need a ``%ignore
-dot;`` directive, placed after the ``%rename`` and before the
-``%include`` directives.  Or, if the function in question is a class
-method, you will want to use ``%extend`` rather than ``%inline`` in
-addition to ``%ignore``.
-
-**A note on error handling:** Note that ``my_dot`` returns a
-``double`` but that it can also raise a Python error.  The
-resulting wrapper function will return a Python float
-representation of 0.0 when the vector lengths do not match.  Since
-this is not ``NULL``, the Python interpreter will not know to check
-for an error.  For this reason, we add the ``%exception`` directive
-above for ``my_dot`` to get the behavior we want (note that
-``$action`` is a macro that gets expanded to a valid call to
-``my_dot``).  In general, you will probably want to write a `SWIG`_
-macro to perform this task.
-
-Other Situations
-````````````````
-
-There are other wrapping situations in which ``numpy.i`` may be
-helpful when you encounter them.
-
-  * In some situations, it is possible that you could use the
-    ``%numpy_typemaps`` macro to implement typemaps for your own
-    types.  See the `Other Common Types: bool`_ or `Other Common
-    Types: complex`_ sections for examples.  Another situation is if
-    your dimensions are of a type other than ``int`` (say ``long`` for
-    example)::
-
-        %numpy_typemaps(double, NPY_DOUBLE, long)
-
-  * You can use the code in ``numpy.i`` to write your own typemaps.
-    For example, if you had a five-dimensional array as a function
-    argument, you could cut-and-paste the appropriate four-dimensional
-    typemaps into your interface file.  The modifications for the
-    fourth dimension would be trivial.
-
-  * Sometimes, the best approach is to use the ``%extend`` directive
-    to define new methods for your classes (or overload existing ones)
-    that take a ``PyObject*`` (that either is or can be converted to a
-    ``PyArrayObject*``) instead of a pointer to a buffer.  In this
-    case, the helper routines in ``numpy.i`` can be very useful.
-
-  * Writing typemaps can be a bit nonintuitive.  If you have specific
-    questions about writing `SWIG`_ typemaps for NumPy, the
-    developers of ``numpy.i`` do monitor the
-    `Numpy-discussion <mailto:Numpy-discussion@scipy.org>`_ and
-    `Swig-user <mailto:Swig-user@lists.sourceforge.net>`_ mail lists.
-
-A Final Note
-````````````
-
-When you use the ``%apply`` directive, as is usually necessary to use
-``numpy.i``, it will remain in effect until you tell `SWIG`_ that it
-shouldn't be.  If the arguments to the functions or methods that you
-are wrapping have common names, such as ``length`` or ``vector``,
-these typemaps may get applied in situations you do not expect or
-want.  Therefore, it is always a good idea to add a ``%clear``
-directive after you are done with a specific typemap::
-
-    %apply (double* IN_ARRAY1, int DIM1) {(double* vector, int length)}
-    %include "my_header.h"
-    %clear (double* vector, int length);
-
-In general, you should target these typemap signatures specifically
-where you want them, and then clear them after you are done.
-
-Summary
--------
-
-Out of the box, ``numpy.i`` provides typemaps that support conversion
-between NumPy arrays and C arrays:
-
-  * That can be one of 12 different scalar types: ``signed char``,
-    ``unsigned char``, ``short``, ``unsigned short``, ``int``,
-    ``unsigned int``, ``long``, ``unsigned long``, ``long long``,
-    ``unsigned long long``, ``float`` and ``double``.
-
-  * That support 74 different argument signatures for each data type,
-    including:
-
-    + One-dimensional, two-dimensional, three-dimensional and
-      four-dimensional arrays.
-
-    + Input-only, in-place, argout, argoutview, and memory managed
-      argoutview behavior.
-
-    + Hard-coded dimensions, data-buffer-then-dimensions
-      specification, and dimensions-then-data-buffer specification.
-
-    + Both C-ordering ("last dimension fastest") or Fortran-ordering
-      ("first dimension fastest") support for 2D, 3D and 4D arrays.
-
-The ``numpy.i`` interface file also provides additional tools for
-wrapper developers, including:
-
-  * A `SWIG`_ macro (``%numpy_typemaps``) with three arguments for
-    implementing the 74 argument signatures for the user's choice of
-    (1) C data type, (2) NumPy data type (assuming they match), and
-    (3) dimension type.
-
-  * Fourteen C macros and fifteen C functions that can be used to
-    write specialized typemaps, extensions, or inlined functions that
-    handle cases not covered by the provided typemaps.  Note that the
-    macros and functions are coded specifically to work with the NumPy
-    C/API regardless of NumPy version number, both before and after
-    the deprecation of some aspects of the API after version 1.6.