numpy 1.9.2__zip → 1.10.0__zip

numpy-1.10.0.post2/numpy/lib/format.py

@@ -0,0 +1,814 @@
+"""
+Define a simple format for saving numpy arrays to disk with the full
+information about them.
+
+The ``.npy`` format is the standard binary file format in NumPy for
+persisting a *single* arbitrary NumPy array on disk. The format stores all
+of the shape and dtype information necessary to reconstruct the array
+correctly even on another machine with a different architecture.
+The format is designed to be as simple as possible while achieving
+its limited goals.
+
+The ``.npz`` format is the standard format for persisting *multiple* NumPy
+arrays on disk. A ``.npz`` file is a zip file containing multiple ``.npy``
+files, one for each array.
+
+Capabilities
+------------
+
+- Can represent all NumPy arrays including nested record arrays and
+  object arrays.
+
+- Represents the data in its native binary form.
+
+- Supports Fortran-contiguous arrays directly.
+
+- Stores all of the necessary information to reconstruct the array
+  including shape and dtype on a machine of a different
+  architecture.  Both little-endian and big-endian arrays are
+  supported, and a file with little-endian numbers will yield
+  a little-endian array on any machine reading the file. The
+  types are described in terms of their actual sizes. For example,
+  if a machine with a 64-bit C "long int" writes out an array with
+  "long ints", a reading machine with 32-bit C "long ints" will yield
+  an array with 64-bit integers.
+
+- Is straightforward to reverse engineer. Datasets often live longer than
+  the programs that created them. A competent developer should be
+  able to create a solution in their preferred programming language to
+  read most ``.npy`` files that he has been given without much
+  documentation.
+
+- Allows memory-mapping of the data. See `open_memmep`.
+
+- Can be read from a filelike stream object instead of an actual file.
+
+- Stores object arrays, i.e. arrays containing elements that are arbitrary
+  Python objects. Files with object arrays are not to be mmapable, but
+  can be read and written to disk.
+
+Limitations
+-----------
+
+- Arbitrary subclasses of numpy.ndarray are not completely preserved.
+  Subclasses will be accepted for writing, but only the array data will
+  be written out. A regular numpy.ndarray object will be created
+  upon reading the file.
+
+.. warning::
+
+  Due to limitations in the interpretation of structured dtypes, dtypes
+  with fields with empty names will have the names replaced by 'f0', 'f1',
+  etc. Such arrays will not round-trip through the format entirely
+  accurately. The data is intact; only the field names will differ. We are
+  working on a fix for this. This fix will not require a change in the
+  file format. The arrays with such structures can still be saved and
+  restored, and the correct dtype may be restored by using the
+  ``loadedarray.view(correct_dtype)`` method.
+
+File extensions
+---------------
+
+We recommend using the ``.npy`` and ``.npz`` extensions for files saved
+in this format. This is by no means a requirement; applications may wish
+to use these file formats but use an extension specific to the
+application. In the absence of an obvious alternative, however,
+we suggest using ``.npy`` and ``.npz``.
+
+Version numbering
+-----------------
+
+The version numbering of these formats is independent of NumPy version
+numbering. If the format is upgraded, the code in `numpy.io` will still
+be able to read and write Version 1.0 files.
+
+Format Version 1.0
+------------------
+
+The first 6 bytes are a magic string: exactly ``\\x93NUMPY``.
+
+The next 1 byte is an unsigned byte: the major version number of the file
+format, e.g. ``\\x01``.
+
+The next 1 byte is an unsigned byte: the minor version number of the file
+format, e.g. ``\\x00``. Note: the version of the file format is not tied
+to the version of the numpy package.
+
+The next 2 bytes form a little-endian unsigned short int: the length of
+the header data HEADER_LEN.
+
+The next HEADER_LEN bytes form the header data describing the array's
+format. It is an ASCII string which contains a Python literal expression
+of a dictionary. It is terminated by a newline (``\\n``) and padded with
+spaces (``\\x20``) to make the total length of
+``magic string + 4 + HEADER_LEN`` be evenly divisible by 16 for alignment
+purposes.
+
+The dictionary contains three keys:
+
+    "descr" : dtype.descr
+      An object that can be passed as an argument to the `numpy.dtype`
+      constructor to create the array's dtype.
+    "fortran_order" : bool
+      Whether the array data is Fortran-contiguous or not. Since
+      Fortran-contiguous arrays are a common form of non-C-contiguity,
+      we allow them to be written directly to disk for efficiency.
+    "shape" : tuple of int
+      The shape of the array.
+
+For repeatability and readability, the dictionary keys are sorted in
+alphabetic order. This is for convenience only. A writer SHOULD implement
+this if possible. A reader MUST NOT depend on this.
+
+Following the header comes the array data. If the dtype contains Python
+objects (i.e. ``dtype.hasobject is True``), then the data is a Python
+pickle of the array. Otherwise the data is the contiguous (either C-
+or Fortran-, depending on ``fortran_order``) bytes of the array.
+Consumers can figure out the number of bytes by multiplying the number
+of elements given by the shape (noting that ``shape=()`` means there is
+1 element) by ``dtype.itemsize``.
+
+Format Version 2.0
+------------------
+
+The version 1.0 format only allowed the array header to have a total size of
+65535 bytes.  This can be exceeded by structured arrays with a large number of
+columns.  The version 2.0 format extends the header size to 4 GiB.
+`numpy.save` will automatically save in 2.0 format if the data requires it,
+else it will always use the more compatible 1.0 format.
+
+The description of the fourth element of the header therefore has become:
+"The next 4 bytes form a little-endian unsigned int: the length of the header
+data HEADER_LEN."
+
+Notes
+-----
+The ``.npy`` format, including reasons for creating it and a comparison of
+alternatives, is described fully in the "npy-format" NEP.
+
+"""
+from __future__ import division, absolute_import, print_function
+
+import numpy
+import sys
+import io
+import warnings
+from numpy.lib.utils import safe_eval
+from numpy.compat import asbytes, asstr, isfileobj, long, basestring
+
+if sys.version_info[0] >= 3:
+    import pickle
+else:
+    import cPickle as pickle
+
+MAGIC_PREFIX = asbytes('\x93NUMPY')
+MAGIC_LEN = len(MAGIC_PREFIX) + 2
+BUFFER_SIZE = 2**18  # size of buffer for reading npz files in bytes
+
+# difference between version 1.0 and 2.0 is a 4 byte (I) header length
+# instead of 2 bytes (H) allowing storage of large structured arrays
+
+def _check_version(version):
+    if version not in [(1, 0), (2, 0), None]:
+        msg = "we only support format version (1,0) and (2, 0), not %s"
+        raise ValueError(msg % (version,))
+
+def magic(major, minor):
+    """ Return the magic string for the given file format version.
+
+    Parameters
+    ----------
+    major : int in [0, 255]
+    minor : int in [0, 255]
+
+    Returns
+    -------
+    magic : str
+
+    Raises
+    ------
+    ValueError if the version cannot be formatted.
+    """
+    if major < 0 or major > 255:
+        raise ValueError("major version must be 0 <= major < 256")
+    if minor < 0 or minor > 255:
+        raise ValueError("minor version must be 0 <= minor < 256")
+    if sys.version_info[0] < 3:
+        return MAGIC_PREFIX + chr(major) + chr(minor)
+    else:
+        return MAGIC_PREFIX + bytes([major, minor])
+
+def read_magic(fp):
+    """ Read the magic string to get the version of the file format.
+
+    Parameters
+    ----------
+    fp : filelike object
+
+    Returns
+    -------
+    major : int
+    minor : int
+    """
+    magic_str = _read_bytes(fp, MAGIC_LEN, "magic string")
+    if magic_str[:-2] != MAGIC_PREFIX:
+        msg = "the magic string is not correct; expected %r, got %r"
+        raise ValueError(msg % (MAGIC_PREFIX, magic_str[:-2]))
+    if sys.version_info[0] < 3:
+        major, minor = map(ord, magic_str[-2:])
+    else:
+        major, minor = magic_str[-2:]
+    return major, minor
+
+def dtype_to_descr(dtype):
+    """
+    Get a serializable descriptor from the dtype.
+
+    The .descr attribute of a dtype object cannot be round-tripped through
+    the dtype() constructor. Simple types, like dtype('float32'), have
+    a descr which looks like a record array with one field with '' as
+    a name. The dtype() constructor interprets this as a request to give
+    a default name.  Instead, we construct descriptor that can be passed to
+    dtype().
+
+    Parameters
+    ----------
+    dtype : dtype
+        The dtype of the array that will be written to disk.
+
+    Returns
+    -------
+    descr : object
+        An object that can be passed to `numpy.dtype()` in order to
+        replicate the input dtype.
+
+    """
+    if dtype.names is not None:
+        # This is a record array. The .descr is fine.  XXX: parts of the
+        # record array with an empty name, like padding bytes, still get
+        # fiddled with. This needs to be fixed in the C implementation of
+        # dtype().
+        return dtype.descr
+    else:
+        return dtype.str
+
+def header_data_from_array_1_0(array):
+    """ Get the dictionary of header metadata from a numpy.ndarray.
+
+    Parameters
+    ----------
+    array : numpy.ndarray
+
+    Returns
+    -------
+    d : dict
+        This has the appropriate entries for writing its string representation
+        to the header of the file.
+    """
+    d = {}
+    d['shape'] = array.shape
+    if array.flags.c_contiguous:
+        d['fortran_order'] = False
+    elif array.flags.f_contiguous:
+        d['fortran_order'] = True
+    else:
+        # Totally non-contiguous data. We will have to make it C-contiguous
+        # before writing. Note that we need to test for C_CONTIGUOUS first
+        # because a 1-D array is both C_CONTIGUOUS and F_CONTIGUOUS.
+        d['fortran_order'] = False
+
+    d['descr'] = dtype_to_descr(array.dtype)
+    return d
+
+def _write_array_header(fp, d, version=None):
+    """ Write the header for an array and returns the version used
+
+    Parameters
+    ----------
+    fp : filelike object
+    d : dict
+        This has the appropriate entries for writing its string representation
+        to the header of the file.
+    version: tuple or None
+        None means use oldest that works
+        explicit version will raise a ValueError if the format does not
+        allow saving this data.  Default: None
+    Returns
+    -------
+    version : tuple of int
+        the file version which needs to be used to store the data
+    """
+    import struct
+    header = ["{"]
+    for key, value in sorted(d.items()):
+        # Need to use repr here, since we eval these when reading
+        header.append("'%s': %s, " % (key, repr(value)))
+    header.append("}")
+    header = "".join(header)
+    # Pad the header with spaces and a final newline such that the magic
+    # string, the header-length short and the header are aligned on a
+    # 16-byte boundary.  Hopefully, some system, possibly memory-mapping,
+    # can take advantage of our premature optimization.
+    current_header_len = MAGIC_LEN + 2 + len(header) + 1  # 1 for the newline
+    topad = 16 - (current_header_len % 16)
+    header = header + ' '*topad + '\n'
+    header = asbytes(_filter_header(header))
+
+    hlen = len(header)
+    if hlen < 256*256 and version in (None, (1, 0)):
+        version = (1, 0)
+        header_prefix = magic(1, 0) + struct.pack('<H', hlen)
+    elif hlen < 2**32 and version in (None, (2, 0)):
+        version = (2, 0)
+        header_prefix = magic(2, 0) + struct.pack('<I', hlen)
+    else:
+        msg = "Header length %s too big for version=%s"
+        msg %= (hlen, version)
+        raise ValueError(msg)
+
+    fp.write(header_prefix)
+    fp.write(header)
+    return version
+
+def write_array_header_1_0(fp, d):
+    """ Write the header for an array using the 1.0 format.
+
+    Parameters
+    ----------
+    fp : filelike object
+    d : dict
+        This has the appropriate entries for writing its string
+        representation to the header of the file.
+    """
+    _write_array_header(fp, d, (1, 0))
+
+
+def write_array_header_2_0(fp, d):
+    """ Write the header for an array using the 2.0 format.
+        The 2.0 format allows storing very large structured arrays.
+
+    .. versionadded:: 1.9.0
+
+    Parameters
+    ----------
+    fp : filelike object
+    d : dict
+        This has the appropriate entries for writing its string
+        representation to the header of the file.
+    """
+    _write_array_header(fp, d, (2, 0))
+
+def read_array_header_1_0(fp):
+    """
+    Read an array header from a filelike object using the 1.0 file format
+    version.
+
+    This will leave the file object located just after the header.
+
+    Parameters
+    ----------
+    fp : filelike object
+        A file object or something with a `.read()` method like a file.
+
+    Returns
+    -------
+    shape : tuple of int
+        The shape of the array.
+    fortran_order : bool
+        The array data will be written out directly if it is either
+        C-contiguous or Fortran-contiguous. Otherwise, it will be made
+        contiguous before writing it out.
+    dtype : dtype
+        The dtype of the file's data.
+
+    Raises
+    ------
+    ValueError
+        If the data is invalid.
+
+    """
+    return _read_array_header(fp, version=(1, 0))
+
+def read_array_header_2_0(fp):
+    """
+    Read an array header from a filelike object using the 2.0 file format
+    version.
+
+    This will leave the file object located just after the header.
+
+    .. versionadded:: 1.9.0
+
+    Parameters
+    ----------
+    fp : filelike object
+        A file object or something with a `.read()` method like a file.
+
+    Returns
+    -------
+    shape : tuple of int
+        The shape of the array.
+    fortran_order : bool
+        The array data will be written out directly if it is either
+        C-contiguous or Fortran-contiguous. Otherwise, it will be made
+        contiguous before writing it out.
+    dtype : dtype
+        The dtype of the file's data.
+
+    Raises
+    ------
+    ValueError
+        If the data is invalid.
+
+    """
+    return _read_array_header(fp, version=(2, 0))
+
+
+def _filter_header(s):
+    """Clean up 'L' in npz header ints.
+
+    Cleans up the 'L' in strings representing integers. Needed to allow npz
+    headers produced in Python2 to be read in Python3.
+
+    Parameters
+    ----------
+    s : byte string
+        Npy file header.
+
+    Returns
+    -------
+    header : str
+        Cleaned up header.
+
+    """
+    import tokenize
+    if sys.version_info[0] >= 3:
+        from io import StringIO
+    else:
+        from StringIO import StringIO
+
+    tokens = []
+    last_token_was_number = False
+    for token in tokenize.generate_tokens(StringIO(asstr(s)).read):
+        token_type = token[0]
+        token_string = token[1]
+        if (last_token_was_number and
+                token_type == tokenize.NAME and
+                token_string == "L"):
+            continue
+        else:
+            tokens.append(token)
+        last_token_was_number = (token_type == tokenize.NUMBER)
+    return tokenize.untokenize(tokens)
+
+
+def _read_array_header(fp, version):
+    """
+    see read_array_header_1_0
+    """
+    # Read an unsigned, little-endian short int which has the length of the
+    # header.
+    import struct
+    if version == (1, 0):
+        hlength_str = _read_bytes(fp, 2, "array header length")
+        header_length = struct.unpack('<H', hlength_str)[0]
+        header = _read_bytes(fp, header_length, "array header")
+    elif version == (2, 0):
+        hlength_str = _read_bytes(fp, 4, "array header length")
+        header_length = struct.unpack('<I', hlength_str)[0]
+        header = _read_bytes(fp, header_length, "array header")
+    else:
+        raise ValueError("Invalid version %r" % version)
+
+    # The header is a pretty-printed string representation of a literal
+    # Python dictionary with trailing newlines padded to a 16-byte
+    # boundary. The keys are strings.
+    #   "shape" : tuple of int
+    #   "fortran_order" : bool
+    #   "descr" : dtype.descr
+    header = _filter_header(header)
+    try:
+        d = safe_eval(header)
+    except SyntaxError as e:
+        msg = "Cannot parse header: %r\nException: %r"
+        raise ValueError(msg % (header, e))
+    if not isinstance(d, dict):
+        msg = "Header is not a dictionary: %r"
+        raise ValueError(msg % d)
+    keys = sorted(d.keys())
+    if keys != ['descr', 'fortran_order', 'shape']:
+        msg = "Header does not contain the correct keys: %r"
+        raise ValueError(msg % (keys,))
+
+    # Sanity-check the values.
+    if (not isinstance(d['shape'], tuple) or
+            not numpy.all([isinstance(x, (int, long)) for x in d['shape']])):
+        msg = "shape is not valid: %r"
+        raise ValueError(msg % (d['shape'],))
+    if not isinstance(d['fortran_order'], bool):
+        msg = "fortran_order is not a valid bool: %r"
+        raise ValueError(msg % (d['fortran_order'],))
+    try:
+        dtype = numpy.dtype(d['descr'])
+    except TypeError as e:
+        msg = "descr is not a valid dtype descriptor: %r"
+        raise ValueError(msg % (d['descr'],))
+
+    return d['shape'], d['fortran_order'], dtype
+
+def write_array(fp, array, version=None, allow_pickle=True, pickle_kwargs=None):
+    """
+    Write an array to an NPY file, including a header.
+
+    If the array is neither C-contiguous nor Fortran-contiguous AND the
+    file_like object is not a real file object, this function will have to
+    copy data in memory.
+
+    Parameters
+    ----------
+    fp : file_like object
+        An open, writable file object, or similar object with a
+        ``.write()`` method.
+    array : ndarray
+        The array to write to disk.
+    version : (int, int) or None, optional
+        The version number of the format. None means use the oldest
+        supported version that is able to store the data.  Default: None
+    allow_pickle : bool, optional
+        Whether to allow writing pickled data. Default: True
+    pickle_kwargs : dict, optional
+        Additional keyword arguments to pass to pickle.dump, excluding
+        'protocol'. These are only useful when pickling objects in object
+        arrays on Python 3 to Python 2 compatible format.
+
+    Raises
+    ------
+    ValueError
+        If the array cannot be persisted. This includes the case of
+        allow_pickle=False and array being an object array.
+    Various other errors
+        If the array contains Python objects as part of its dtype, the
+        process of pickling them may raise various errors if the objects
+        are not picklable.
+
+    """
+    _check_version(version)
+    used_ver = _write_array_header(fp, header_data_from_array_1_0(array),
+                                   version)
+    # this warning can be removed when 1.9 has aged enough
+    if version != (2, 0) and used_ver == (2, 0):
+        warnings.warn("Stored array in format 2.0. It can only be"
+                      "read by NumPy >= 1.9", UserWarning)
+
+    # Set buffer size to 16 MiB to hide the Python loop overhead.
+    buffersize = max(16 * 1024 ** 2 // array.itemsize, 1)
+
+    if array.dtype.hasobject:
+        # We contain Python objects so we cannot write out the data
+        # directly.  Instead, we will pickle it out with version 2 of the
+        # pickle protocol.
+        if not allow_pickle:
+            raise ValueError("Object arrays cannot be saved when "
+                             "allow_pickle=False")
+        if pickle_kwargs is None:
+            pickle_kwargs = {}
+        pickle.dump(array, fp, protocol=2, **pickle_kwargs)
+    elif array.flags.f_contiguous and not array.flags.c_contiguous:
+        if isfileobj(fp):
+            array.T.tofile(fp)
+        else:
+            for chunk in numpy.nditer(
+                    array, flags=['external_loop', 'buffered', 'zerosize_ok'],
+                    buffersize=buffersize, order='F'):
+                fp.write(chunk.tobytes('C'))
+    else:
+        if isfileobj(fp):
+            array.tofile(fp)
+        else:
+            for chunk in numpy.nditer(
+                    array, flags=['external_loop', 'buffered', 'zerosize_ok'],
+                    buffersize=buffersize, order='C'):
+                fp.write(chunk.tobytes('C'))
+
+
+def read_array(fp, allow_pickle=True, pickle_kwargs=None):
+    """
+    Read an array from an NPY file.
+
+    Parameters
+    ----------
+    fp : file_like object
+        If this is not a real file object, then this may take extra memory
+        and time.
+    allow_pickle : bool, optional
+        Whether to allow reading pickled data. Default: True
+    pickle_kwargs : dict
+        Additional keyword arguments to pass to pickle.load. These are only
+        useful when loading object arrays saved on Python 2 when using
+        Python 3.
+
+    Returns
+    -------
+    array : ndarray
+        The array from the data on disk.
+
+    Raises
+    ------
+    ValueError
+        If the data is invalid, or allow_pickle=False and the file contains
+        an object array.
+
+    """
+    version = read_magic(fp)
+    _check_version(version)
+    shape, fortran_order, dtype = _read_array_header(fp, version)
+    if len(shape) == 0:
+        count = 1
+    else:
+        count = numpy.multiply.reduce(shape)
+
+    # Now read the actual data.
+    if dtype.hasobject:
+        # The array contained Python objects. We need to unpickle the data.
+        if not allow_pickle:
+            raise ValueError("Object arrays cannot be loaded when "
+                             "allow_pickle=False")
+        if pickle_kwargs is None:
+            pickle_kwargs = {}
+        try:
+            array = pickle.load(fp, **pickle_kwargs)
+        except UnicodeError as err:
+            if sys.version_info[0] >= 3:
+                # Friendlier error message
+                raise UnicodeError("Unpickling a python object failed: %r\n"
+                                   "You may need to pass the encoding= option "
+                                   "to numpy.load" % (err,))
+            raise
+    else:
+        if isfileobj(fp):
+            # We can use the fast fromfile() function.
+            array = numpy.fromfile(fp, dtype=dtype, count=count)
+        else:
+            # This is not a real file. We have to read it the
+            # memory-intensive way.
+            # crc32 module fails on reads greater than 2 ** 32 bytes,
+            # breaking large reads from gzip streams. Chunk reads to
+            # BUFFER_SIZE bytes to avoid issue and reduce memory overhead
+            # of the read. In non-chunked case count < max_read_count, so
+            # only one read is performed.
+
+            max_read_count = BUFFER_SIZE // min(BUFFER_SIZE, dtype.itemsize)
+
+            array = numpy.empty(count, dtype=dtype)
+            for i in range(0, count, max_read_count):
+                read_count = min(max_read_count, count - i)
+                read_size = int(read_count * dtype.itemsize)
+                data = _read_bytes(fp, read_size, "array data")
+                array[i:i+read_count] = numpy.frombuffer(data, dtype=dtype,
+                                                         count=read_count)
+
+        if fortran_order:
+            array.shape = shape[::-1]
+            array = array.transpose()
+        else:
+            array.shape = shape
+
+    return array
+
+
+def open_memmap(filename, mode='r+', dtype=None, shape=None,
+                fortran_order=False, version=None):
+    """
+    Open a .npy file as a memory-mapped array.
+
+    This may be used to read an existing file or create a new one.
+
+    Parameters
+    ----------
+    filename : str
+        The name of the file on disk.  This may *not* be a file-like
+        object.
+    mode : str, optional
+        The mode in which to open the file; the default is 'r+'.  In
+        addition to the standard file modes, 'c' is also accepted to mean
+        "copy on write."  See `memmap` for the available mode strings.
+    dtype : data-type, optional
+        The data type of the array if we are creating a new file in "write"
+        mode, if not, `dtype` is ignored.  The default value is None, which
+        results in a data-type of `float64`.
+    shape : tuple of int
+        The shape of the array if we are creating a new file in "write"
+        mode, in which case this parameter is required.  Otherwise, this
+        parameter is ignored and is thus optional.
+    fortran_order : bool, optional
+        Whether the array should be Fortran-contiguous (True) or
+        C-contiguous (False, the default) if we are creating a new file in
+        "write" mode.
+    version : tuple of int (major, minor) or None
+        If the mode is a "write" mode, then this is the version of the file
+        format used to create the file.  None means use the oldest
+        supported version that is able to store the data.  Default: None
+
+    Returns
+    -------
+    marray : memmap
+        The memory-mapped array.
+
+    Raises
+    ------
+    ValueError
+        If the data or the mode is invalid.
+    IOError
+        If the file is not found or cannot be opened correctly.
+
+    See Also
+    --------
+    memmap
+
+    """
+    if not isinstance(filename, basestring):
+        raise ValueError("Filename must be a string.  Memmap cannot use"
+                         " existing file handles.")
+
+    if 'w' in mode:
+        # We are creating the file, not reading it.
+        # Check if we ought to create the file.
+        _check_version(version)
+        # Ensure that the given dtype is an authentic dtype object rather
+        # than just something that can be interpreted as a dtype object.
+        dtype = numpy.dtype(dtype)
+        if dtype.hasobject:
+            msg = "Array can't be memory-mapped: Python objects in dtype."
+            raise ValueError(msg)
+        d = dict(
+            descr=dtype_to_descr(dtype),
+            fortran_order=fortran_order,
+            shape=shape,
+        )
+        # If we got here, then it should be safe to create the file.
+        fp = open(filename, mode+'b')
+        try:
+            used_ver = _write_array_header(fp, d, version)
+            # this warning can be removed when 1.9 has aged enough
+            if version != (2, 0) and used_ver == (2, 0):
+                warnings.warn("Stored array in format 2.0. It can only be"
+                              "read by NumPy >= 1.9", UserWarning)
+            offset = fp.tell()
+        finally:
+            fp.close()
+    else:
+        # Read the header of the file first.
+        fp = open(filename, 'rb')
+        try:
+            version = read_magic(fp)
+            _check_version(version)
+
+            shape, fortran_order, dtype = _read_array_header(fp, version)
+            if dtype.hasobject:
+                msg = "Array can't be memory-mapped: Python objects in dtype."
+                raise ValueError(msg)
+            offset = fp.tell()
+        finally:
+            fp.close()
+
+    if fortran_order:
+        order = 'F'
+    else:
+        order = 'C'
+
+    # We need to change a write-only mode to a read-write mode since we've
+    # already written data to the file.
+    if mode == 'w+':
+        mode = 'r+'
+
+    marray = numpy.memmap(filename, dtype=dtype, shape=shape, order=order,
+        mode=mode, offset=offset)
+
+    return marray
+
+
+def _read_bytes(fp, size, error_template="ran out of data"):
+    """
+    Read from file-like object until size bytes are read.
+    Raises ValueError if not EOF is encountered before size bytes are read.
+    Non-blocking objects only supported if they derive from io objects.
+
+    Required as e.g. ZipExtFile in python 2.6 can return less data than
+    requested.
+    """
+    data = bytes()
+    while True:
+        # io files (default in python3) return None or raise on
+        # would-block, python2 file will truncate, probably nothing can be
+        # done about that.  note that regular files can't be non-blocking
+        try:
+            r = fp.read(size - len(data))
+            data += r
+            if len(r) == 0 or len(data) == size:
+                break
+        except io.BlockingIOError:
+            pass
+    if len(data) != size:
+        msg = "EOF: reading %s, expected %d bytes got %d"
+        raise ValueError(msg % (error_template, size, len(data)))
+    else:
+        return data