@patleeman/pi-boy 0.1.0

package/mgba-bridge/vendor/mgba/src/third-party/zlib/contrib/infback9/inffix9.h

@@ -0,0 +1,107 @@
+    /* inffix9.h -- table for decoding deflate64 fixed codes
+     * Generated automatically by makefixed9().
+     */
+
+    /* WARNING: this file should *not* be used by applications.
+       It is part of the implementation of this library and is
+       subject to change. Applications should only use zlib.h.
+     */
+
+    static const code lenfix[512] = {
+        {96,7,0},{0,8,80},{0,8,16},{132,8,115},{130,7,31},{0,8,112},
+        {0,8,48},{0,9,192},{128,7,10},{0,8,96},{0,8,32},{0,9,160},
+        {0,8,0},{0,8,128},{0,8,64},{0,9,224},{128,7,6},{0,8,88},
+        {0,8,24},{0,9,144},{131,7,59},{0,8,120},{0,8,56},{0,9,208},
+        {129,7,17},{0,8,104},{0,8,40},{0,9,176},{0,8,8},{0,8,136},
+        {0,8,72},{0,9,240},{128,7,4},{0,8,84},{0,8,20},{133,8,227},
+        {131,7,43},{0,8,116},{0,8,52},{0,9,200},{129,7,13},{0,8,100},
+        {0,8,36},{0,9,168},{0,8,4},{0,8,132},{0,8,68},{0,9,232},
+        {128,7,8},{0,8,92},{0,8,28},{0,9,152},{132,7,83},{0,8,124},
+        {0,8,60},{0,9,216},{130,7,23},{0,8,108},{0,8,44},{0,9,184},
+        {0,8,12},{0,8,140},{0,8,76},{0,9,248},{128,7,3},{0,8,82},
+        {0,8,18},{133,8,163},{131,7,35},{0,8,114},{0,8,50},{0,9,196},
+        {129,7,11},{0,8,98},{0,8,34},{0,9,164},{0,8,2},{0,8,130},
+        {0,8,66},{0,9,228},{128,7,7},{0,8,90},{0,8,26},{0,9,148},
+        {132,7,67},{0,8,122},{0,8,58},{0,9,212},{130,7,19},{0,8,106},
+        {0,8,42},{0,9,180},{0,8,10},{0,8,138},{0,8,74},{0,9,244},
+        {128,7,5},{0,8,86},{0,8,22},{65,8,0},{131,7,51},{0,8,118},
+        {0,8,54},{0,9,204},{129,7,15},{0,8,102},{0,8,38},{0,9,172},
+        {0,8,6},{0,8,134},{0,8,70},{0,9,236},{128,7,9},{0,8,94},
+        {0,8,30},{0,9,156},{132,7,99},{0,8,126},{0,8,62},{0,9,220},
+        {130,7,27},{0,8,110},{0,8,46},{0,9,188},{0,8,14},{0,8,142},
+        {0,8,78},{0,9,252},{96,7,0},{0,8,81},{0,8,17},{133,8,131},
+        {130,7,31},{0,8,113},{0,8,49},{0,9,194},{128,7,10},{0,8,97},
+        {0,8,33},{0,9,162},{0,8,1},{0,8,129},{0,8,65},{0,9,226},
+        {128,7,6},{0,8,89},{0,8,25},{0,9,146},{131,7,59},{0,8,121},
+        {0,8,57},{0,9,210},{129,7,17},{0,8,105},{0,8,41},{0,9,178},
+        {0,8,9},{0,8,137},{0,8,73},{0,9,242},{128,7,4},{0,8,85},
+        {0,8,21},{144,8,3},{131,7,43},{0,8,117},{0,8,53},{0,9,202},
+        {129,7,13},{0,8,101},{0,8,37},{0,9,170},{0,8,5},{0,8,133},
+        {0,8,69},{0,9,234},{128,7,8},{0,8,93},{0,8,29},{0,9,154},
+        {132,7,83},{0,8,125},{0,8,61},{0,9,218},{130,7,23},{0,8,109},
+        {0,8,45},{0,9,186},{0,8,13},{0,8,141},{0,8,77},{0,9,250},
+        {128,7,3},{0,8,83},{0,8,19},{133,8,195},{131,7,35},{0,8,115},
+        {0,8,51},{0,9,198},{129,7,11},{0,8,99},{0,8,35},{0,9,166},
+        {0,8,3},{0,8,131},{0,8,67},{0,9,230},{128,7,7},{0,8,91},
+        {0,8,27},{0,9,150},{132,7,67},{0,8,123},{0,8,59},{0,9,214},
+        {130,7,19},{0,8,107},{0,8,43},{0,9,182},{0,8,11},{0,8,139},
+        {0,8,75},{0,9,246},{128,7,5},{0,8,87},{0,8,23},{77,8,0},
+        {131,7,51},{0,8,119},{0,8,55},{0,9,206},{129,7,15},{0,8,103},
+        {0,8,39},{0,9,174},{0,8,7},{0,8,135},{0,8,71},{0,9,238},
+        {128,7,9},{0,8,95},{0,8,31},{0,9,158},{132,7,99},{0,8,127},
+        {0,8,63},{0,9,222},{130,7,27},{0,8,111},{0,8,47},{0,9,190},
+        {0,8,15},{0,8,143},{0,8,79},{0,9,254},{96,7,0},{0,8,80},
+        {0,8,16},{132,8,115},{130,7,31},{0,8,112},{0,8,48},{0,9,193},
+        {128,7,10},{0,8,96},{0,8,32},{0,9,161},{0,8,0},{0,8,128},
+        {0,8,64},{0,9,225},{128,7,6},{0,8,88},{0,8,24},{0,9,145},
+        {131,7,59},{0,8,120},{0,8,56},{0,9,209},{129,7,17},{0,8,104},
+        {0,8,40},{0,9,177},{0,8,8},{0,8,136},{0,8,72},{0,9,241},
+        {128,7,4},{0,8,84},{0,8,20},{133,8,227},{131,7,43},{0,8,116},
+        {0,8,52},{0,9,201},{129,7,13},{0,8,100},{0,8,36},{0,9,169},
+        {0,8,4},{0,8,132},{0,8,68},{0,9,233},{128,7,8},{0,8,92},
+        {0,8,28},{0,9,153},{132,7,83},{0,8,124},{0,8,60},{0,9,217},
+        {130,7,23},{0,8,108},{0,8,44},{0,9,185},{0,8,12},{0,8,140},
+        {0,8,76},{0,9,249},{128,7,3},{0,8,82},{0,8,18},{133,8,163},
+        {131,7,35},{0,8,114},{0,8,50},{0,9,197},{129,7,11},{0,8,98},
+        {0,8,34},{0,9,165},{0,8,2},{0,8,130},{0,8,66},{0,9,229},
+        {128,7,7},{0,8,90},{0,8,26},{0,9,149},{132,7,67},{0,8,122},
+        {0,8,58},{0,9,213},{130,7,19},{0,8,106},{0,8,42},{0,9,181},
+        {0,8,10},{0,8,138},{0,8,74},{0,9,245},{128,7,5},{0,8,86},
+        {0,8,22},{65,8,0},{131,7,51},{0,8,118},{0,8,54},{0,9,205},
+        {129,7,15},{0,8,102},{0,8,38},{0,9,173},{0,8,6},{0,8,134},
+        {0,8,70},{0,9,237},{128,7,9},{0,8,94},{0,8,30},{0,9,157},
+        {132,7,99},{0,8,126},{0,8,62},{0,9,221},{130,7,27},{0,8,110},
+        {0,8,46},{0,9,189},{0,8,14},{0,8,142},{0,8,78},{0,9,253},
+        {96,7,0},{0,8,81},{0,8,17},{133,8,131},{130,7,31},{0,8,113},
+        {0,8,49},{0,9,195},{128,7,10},{0,8,97},{0,8,33},{0,9,163},
+        {0,8,1},{0,8,129},{0,8,65},{0,9,227},{128,7,6},{0,8,89},
+        {0,8,25},{0,9,147},{131,7,59},{0,8,121},{0,8,57},{0,9,211},
+        {129,7,17},{0,8,105},{0,8,41},{0,9,179},{0,8,9},{0,8,137},
+        {0,8,73},{0,9,243},{128,7,4},{0,8,85},{0,8,21},{144,8,3},
+        {131,7,43},{0,8,117},{0,8,53},{0,9,203},{129,7,13},{0,8,101},
+        {0,8,37},{0,9,171},{0,8,5},{0,8,133},{0,8,69},{0,9,235},
+        {128,7,8},{0,8,93},{0,8,29},{0,9,155},{132,7,83},{0,8,125},
+        {0,8,61},{0,9,219},{130,7,23},{0,8,109},{0,8,45},{0,9,187},
+        {0,8,13},{0,8,141},{0,8,77},{0,9,251},{128,7,3},{0,8,83},
+        {0,8,19},{133,8,195},{131,7,35},{0,8,115},{0,8,51},{0,9,199},
+        {129,7,11},{0,8,99},{0,8,35},{0,9,167},{0,8,3},{0,8,131},
+        {0,8,67},{0,9,231},{128,7,7},{0,8,91},{0,8,27},{0,9,151},
+        {132,7,67},{0,8,123},{0,8,59},{0,9,215},{130,7,19},{0,8,107},
+        {0,8,43},{0,9,183},{0,8,11},{0,8,139},{0,8,75},{0,9,247},
+        {128,7,5},{0,8,87},{0,8,23},{77,8,0},{131,7,51},{0,8,119},
+        {0,8,55},{0,9,207},{129,7,15},{0,8,103},{0,8,39},{0,9,175},
+        {0,8,7},{0,8,135},{0,8,71},{0,9,239},{128,7,9},{0,8,95},
+        {0,8,31},{0,9,159},{132,7,99},{0,8,127},{0,8,63},{0,9,223},
+        {130,7,27},{0,8,111},{0,8,47},{0,9,191},{0,8,15},{0,8,143},
+        {0,8,79},{0,9,255}
+    };
+
+    static const code distfix[32] = {
+        {128,5,1},{135,5,257},{131,5,17},{139,5,4097},{129,5,5},
+        {137,5,1025},{133,5,65},{141,5,16385},{128,5,3},{136,5,513},
+        {132,5,33},{140,5,8193},{130,5,9},{138,5,2049},{134,5,129},
+        {142,5,32769},{128,5,2},{135,5,385},{131,5,25},{139,5,6145},
+        {129,5,7},{137,5,1537},{133,5,97},{141,5,24577},{128,5,4},
+        {136,5,769},{132,5,49},{140,5,12289},{130,5,13},{138,5,3073},
+        {134,5,193},{142,5,49153}
+    };

package/mgba-bridge/vendor/mgba/src/third-party/zlib/contrib/infback9/inflate9.h

@@ -0,0 +1,47 @@
+/* inflate9.h -- internal inflate state definition
+ * Copyright (C) 1995-2003 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+            LEN,        /* i: waiting for length/lit code */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD         /* got a data error -- remain here until reset */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to the BAD mode -- not shown for clarity)
+
+    Read deflate blocks:
+            TYPE -> STORED or TABLE or LEN or DONE
+            STORED -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN
+    Read deflate codes:
+                LEN -> LEN or TYPE
+ */
+
+/* state maintained between inflate() calls.  Approximately 7K bytes. */
+struct inflate_state {
+        /* sliding window */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+};

package/mgba-bridge/vendor/mgba/src/third-party/zlib/contrib/infback9/inftree9.c

@@ -0,0 +1,324 @@
+/* inftree9.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2022 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftree9.h"
+
+#define MAXBITS 15
+
+const char inflate9_copyright[] =
+   " inflate9 1.2.12 Copyright 1995-2022 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int inflate_table9(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code this;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    int end;                    /* use base and extra for symbol > end */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17,
+        19, 23, 27, 31, 35, 43, 51, 59, 67, 83, 99, 115,
+        131, 163, 195, 227, 3, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
+        130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
+        133, 133, 133, 133, 144, 199, 202};
+    static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
+        65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
+        4097, 6145, 8193, 12289, 16385, 24577, 32769, 49153};
+    static const unsigned short dext[32] = { /* Distance codes 0..31 extra */
+        128, 128, 128, 128, 129, 129, 130, 130, 131, 131, 132, 132,
+        133, 133, 134, 134, 135, 135, 136, 136, 137, 137, 138, 138,
+        139, 139, 140, 140, 141, 141, 142, 142};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) return -1;            /* no codes! */
+    for (min = 1; min <= MAXBITS; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftree9.h
+       for more information.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        end = 19;
+        break;
+    case LENS:
+        base = lbase;
+        base -= 257;
+        extra = lext;
+        extra -= 257;
+        end = 256;
+        break;
+    default:            /* DISTS */
+        base = dbase;
+        extra = dext;
+        end = -1;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if ((type == LENS && used >= ENOUGH_LENS) ||
+        (type == DISTS && used >= ENOUGH_DISTS))
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        this.bits = (unsigned char)(len - drop);
+        if ((int)(work[sym]) < end) {
+            this.op = (unsigned char)0;
+            this.val = work[sym];
+        }
+        else if ((int)(work[sym]) > end) {
+            this.op = (unsigned char)(extra[work[sym]]);
+            this.val = base[work[sym]];
+        }
+        else {
+            this.op = (unsigned char)(32 + 64);         /* end of block */
+            this.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = this;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += 1U << curr;
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used >= ENOUGH_LENS) ||
+                (type == DISTS && used >= ENOUGH_DISTS))
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /*
+       Fill in rest of table for incomplete codes.  This loop is similar to the
+       loop above in incrementing huff for table indices.  It is assumed that
+       len is equal to curr + drop, so there is no loop needed to increment
+       through high index bits.  When the current sub-table is filled, the loop
+       drops back to the root table to fill in any remaining entries there.
+     */
+    this.op = (unsigned char)64;                /* invalid code marker */
+    this.bits = (unsigned char)(len - drop);
+    this.val = (unsigned short)0;
+    while (huff != 0) {
+        /* when done with sub-table, drop back to root table */
+        if (drop != 0 && (huff & mask) != low) {
+            drop = 0;
+            len = root;
+            next = *table;
+            curr = root;
+            this.bits = (unsigned char)len;
+        }
+
+        /* put invalid code marker in table */
+        next[huff >> drop] = this;
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}

package/mgba-bridge/vendor/mgba/src/third-party/zlib/contrib/infback9/inftree9.h

@@ -0,0 +1,61 @@
+/* inftree9.h -- header to use inftree9.c
+ * Copyright (C) 1995-2008 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    100eeeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1446, which is the sum of 852 for literal/length codes and 594 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 32 6 15" for distance codes returns 594.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in infback9.c.  If the root table size is changed,
+   then these maximum sizes would be need to be recalculated and updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 594
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table9() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+extern int inflate_table9 OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));

package/mgba-bridge/vendor/mgba/src/third-party/zlib/contrib/iostream/test.cpp

@@ -0,0 +1,24 @@
+
+#include "zfstream.h"
+
+int main() {
+
+  // Construct a stream object with this filebuffer.  Anything sent
+  // to this stream will go to standard out.
+  gzofstream os( 1, ios::out );
+
+  // This text is getting compressed and sent to stdout.
+  // To prove this, run 'test | zcat'.
+  os << "Hello, Mommy" << endl;
+
+  os << setcompressionlevel( Z_NO_COMPRESSION );
+  os << "hello, hello, hi, ho!" << endl;
+
+  setcompressionlevel( os, Z_DEFAULT_COMPRESSION )
+    << "I'm compressing again" << endl;
+
+  os.close();
+
+  return 0;
+
+}