@patleeman/pi-boy 0.1.0

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/arm-neon/linux-auxv.c

@@ -0,0 +1,120 @@
+/* contrib/arm-neon/linux-auxv.c
+ *
+ * Copyright (c) 2014 Glenn Randers-Pehrson
+ * Written by Mans Rullgard, 2011.
+ * Last changed in libpng 1.6.10 [March 6, 2014]
+ *
+ * This code is released under the libpng license.
+ * For conditions of distribution and use, see the disclaimer
+ * and license in png.h
+ *
+ * SEE contrib/arm-neon/README before reporting bugs
+ *
+ * STATUS: COMPILED, TESTED
+ * BUG REPORTS: png-mng-implement@sourceforge.net
+ *
+ * png_have_neon implemented for Linux versions which allow access to
+ * /proc/self/auxv.  This is probably faster, cleaner and safer than the code to
+ * read /proc/cpuinfo in contrib/arm-neon/linux, however it is yet another piece
+ * of potentially untested code and has more complex dependencies than the code
+ * to read cpuinfo.
+ *
+ * This generic __linux__ implementation requires reading /proc/self/auxv and
+ * looking at each element for one that records NEON capabilities.
+ */
+#include <unistd.h> /* for POSIX 1003.1 */
+#include <errno.h>  /* for EINTR */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <elf.h>
+#include <asm/hwcap.h>
+
+/* A read call may be interrupted, in which case it returns -1 and sets errno to
+ * EINTR if nothing was done, otherwise (if something was done) a partial read
+ * may result.
+ */
+static size_t
+safe_read(png_structp png_ptr, int fd, void *buffer_in, size_t nbytes)
+{
+   size_t ntotal = 0;
+   char *buffer = png_voidcast(char*, buffer_in);
+
+   while (nbytes > 0)
+   {
+      unsigned int nread;
+      int iread;
+
+      /* Passing nread > INT_MAX to read is implementation defined in POSIX
+       * 1003.1, therefore despite the unsigned argument portable code must
+       * limit the value to INT_MAX!
+       */
+      if (nbytes > INT_MAX)
+         nread = INT_MAX;
+
+      else
+         nread = (unsigned int)/*SAFE*/nbytes;
+
+      iread = read(fd, buffer, nread);
+
+      if (iread == -1)
+      {
+         /* This is the devil in the details, a read can terminate early with 0
+          * bytes read because of EINTR, yet it still returns -1 otherwise end
+          * of file cannot be distinguished.
+          */
+         if (errno != EINTR)
+         {
+            png_warning(png_ptr, "/proc read failed");
+            return 0; /* I.e., a permanent failure */
+         }
+      }
+
+      else if (iread < 0)
+      {
+         /* Not a valid 'read' result: */
+         png_warning(png_ptr, "OS /proc read bug");
+         return 0;
+      }
+
+      else if (iread > 0)
+      {
+         /* Continue reading until a permanent failure, or EOF */
+         buffer += iread;
+         nbytes -= (unsigned int)/*SAFE*/iread;
+         ntotal += (unsigned int)/*SAFE*/iread;
+      }
+
+      else
+         return ntotal;
+   }
+
+   return ntotal; /* nbytes == 0 */
+}
+
+static int
+png_have_neon(png_structp png_ptr)
+{
+   int fd = open("/proc/self/auxv", O_RDONLY);
+   Elf32_auxv_t aux;
+
+   /* Failsafe: failure to open means no NEON */
+   if (fd == -1)
+   {
+      png_warning(png_ptr, "/proc/self/auxv open failed");
+      return 0;
+   }
+
+   while (safe_read(png_ptr, fd, &aux, sizeof aux) == sizeof aux)
+   {
+      if (aux.a_type == AT_HWCAP && (aux.a_un.a_val & HWCAP_NEON) != 0)
+      {
+         close(fd);
+         return 1;
+      }
+   }
+
+   close(fd);
+   return 0;
+}

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/arm-neon/linux.c

@@ -0,0 +1,161 @@
+/* contrib/arm-neon/linux.c
+ *
+ * Last changed in libpng 1.6.31 [July 27, 2017]
+ * Copyright (c) 2014, 2017 Glenn Randers-Pehrson
+ * Written by John Bowler, 2014, 2017.
+ *
+ * This code is released under the libpng license.
+ * For conditions of distribution and use, see the disclaimer
+ * and license in png.h
+ *
+ * SEE contrib/arm-neon/README before reporting bugs
+ *
+ * STATUS: SUPPORTED
+ * BUG REPORTS: png-mng-implement@sourceforge.net
+ *
+ * png_have_neon implemented for Linux by reading the widely available
+ * pseudo-file /proc/cpuinfo.
+ *
+ * This code is strict ANSI-C and is probably moderately portable; it does
+ * however use <stdio.h> and it assumes that /proc/cpuinfo is never localized.
+ */
+#include <stdio.h>
+
+static int
+png_have_neon(png_structp png_ptr)
+{
+   FILE *f = fopen("/proc/cpuinfo", "rb");
+
+   if (f != NULL)
+   {
+      /* This is a simple state machine which reads the input byte-by-byte until
+       * it gets a match on the 'neon' feature or reaches the end of the stream.
+       */
+      static const char ch_feature[] = { 70, 69, 65, 84, 85, 82, 69, 83 };
+      static const char ch_neon[] = { 78, 69, 79, 78 };
+
+      enum
+      {
+         StartLine, Feature, Colon, StartTag, Neon, HaveNeon, SkipTag, SkipLine
+      }  state;
+      int counter;
+
+      for (state=StartLine, counter=0;;)
+      {
+         int ch = fgetc(f);
+
+         if (ch == EOF)
+         {
+            /* EOF means error or end-of-file, return false; neon at EOF is
+             * assumed to be a mistake.
+             */
+            fclose(f);
+            return 0;
+         }
+
+         switch (state)
+         {
+            case StartLine:
+               /* Match spaces at the start of line */
+               if (ch <= 32) /* skip control characters and space */
+                  break;
+
+               counter=0;
+               state = Feature;
+               /* FALLTHROUGH */
+
+            case Feature:
+               /* Match 'FEATURE', ASCII case insensitive. */
+               if ((ch & ~0x20) == ch_feature[counter])
+               {
+                  if (++counter == (sizeof ch_feature))
+                     state = Colon;
+                  break;
+               }
+
+               /* did not match 'feature' */
+               state = SkipLine;
+               /* FALLTHROUGH */
+
+            case SkipLine:
+            skipLine:
+               /* Skip everything until we see linefeed or carriage return */
+               if (ch != 10 && ch != 13)
+                  break;
+
+               state = StartLine;
+               break;
+
+            case Colon:
+               /* Match any number of space or tab followed by ':' */
+               if (ch == 32 || ch == 9)
+                  break;
+
+               if (ch == 58) /* i.e. ':' */
+               {
+                  state = StartTag;
+                  break;
+               }
+
+               /* Either a bad line format or a 'feature' prefix followed by
+                * other characters.
+                */
+               state = SkipLine;
+               goto skipLine;
+
+            case StartTag:
+               /* Skip space characters before a tag */
+               if (ch == 32 || ch == 9)
+                  break;
+
+               state = Neon;
+               counter = 0;
+               /* FALLTHROUGH */
+
+            case Neon:
+               /* Look for 'neon' tag */
+               if ((ch & ~0x20) == ch_neon[counter])
+               {
+                  if (++counter == (sizeof ch_neon))
+                     state = HaveNeon;
+                  break;
+               }
+
+               state = SkipTag;
+               /* FALLTHROUGH */
+
+            case SkipTag:
+               /* Skip non-space characters */
+               if (ch == 10 || ch == 13)
+                  state = StartLine;
+
+               else if (ch == 32 || ch == 9)
+                  state = StartTag;
+               break;
+
+            case HaveNeon:
+               /* Have seen a 'neon' prefix, but there must be a space or new
+                * line character to terminate it.
+                */
+               if (ch == 10 || ch == 13 || ch == 32 || ch == 9)
+               {
+                  fclose(f);
+                  return 1;
+               }
+
+               state = SkipTag;
+               break;
+
+            default:
+               png_error(png_ptr, "png_have_neon: internal error (bug)");
+         }
+      }
+   }
+
+#ifdef PNG_WARNINGS_SUPPORTED
+   else
+      png_warning(png_ptr, "/proc/cpuinfo open failed");
+#endif
+
+   return 0;
+}

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/conftest/README

@@ -0,0 +1,49 @@
+This directory contains test configuration files, currently always '.dfa' files
+intended to be used in the build by setting the make macro DFA_XTRA to the name
+of the file.
+
+These files are used in release validation of the 'configure' builds of libpng
+by building 'make check', or 'make all-am' for cross-builds, with each .dfa
+file.
+
+The files in this directory may change between minor releases, however
+contributions describing specific builds of libpng are welcomed.  There is no
+guarantee that libpng will continue to build with such configurations; support
+for given configurations can be, and has been, dropped between successive minor
+releases.  However if a .dfa file describing a configuration is not in this
+directory it is very unlikely that it will be tested before a minor release!
+
+You can use these .dfa files as the basis of new configurations.  Files in this
+directory should not have any use restrictions or restrictive licenses.
+
+This directory is not included in the .zip and .7z distributions, which do
+not contain 'configure' scripts.
+
+DOCUMENTATION
+=============
+
+Examples:
+   ${srcdir}/pngusr.dfa
+   ${srcdir}/contrib/pngminim/*/pngusr.dfa
+
+Documentation of the options:
+   ${srcdir}/scripts/pnglibconf.dfa
+
+Documentation of the file format:
+   ${srcdir}/scripts/options.awk
+
+FILE NAMING
+===========
+
+File names in this directory may NOT contain any of the five characters:
+
+   - , + * ?
+
+Neither may they contain any space character.
+
+While other characters may be used it is strongly suggested that file names be
+limited to lower case Latiin alphabetic characters (a-z), digits (0-9) and, if
+necessary the underscore (_) character.  File names should be about 8 characters
+long (excluding the .dfa extension).  Submitted .dfa files should have names
+between 7 and 16 characters long, shorter names (6 characters or less) are
+reserved for standard tests.

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/conftest/pngcp.dfa

@@ -0,0 +1,57 @@
+# pngcp.dfa
+#  Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2016
+# Usage rights:
+#  To the extent possible under law, the author has waived all copyright and
+#  related or neighboring rights to this work.  This work is published from:
+#  United States.
+#
+# Build libpng with support for pngcp.  This means just png_read_png,
+# png_write_png and small number of configuration settings.
+#
+everything = off
+
+# This option is specific to this configuration; it adds a #define to the
+# generated pnglibconf.h which turns on the (not portable) timing option for
+# pngcp.  Note that any option is automatically preceded by PNG_; there is no
+# way round this and this is deliberate.
+option PNGCP_TIMING
+
+# Because of the everything off above the option must also be turned on.  This
+# may not be done in one step because it is safer and avoids mis-spelled options
+# in user .dfa files to error out if an unrecognized option is turned on.
+option PNGCP_TIMING on
+
+# Options to turn on png_read_png and png_write_png:
+option INFO_IMAGE on
+option SEQUENTIAL_READ on
+option EASY_ACCESS on
+option WRITE on
+option WRITE_16BIT on
+option WRITE_FILTER on
+
+# pngcp needs this to preserve unknown chunks, switching all these on means that
+# pngcp can work without explicit known chunk reading support
+option UNKNOWN_CHUNKS on
+option SET_UNKNOWN_CHUNKS on
+option HANDLE_AS_UNKNOWN on
+option SAVE_UNKNOWN_CHUNKS on
+option WRITE_UNKNOWN_CHUNKS on
+
+# pngcp needs this to handle palette files with invalid indices:
+option CHECK_FOR_INVALID_INDEX on
+option GET_PALETTE_MAX on
+
+# Pre-libpng 1.7 pngcp has to stash text chunks manually, post 1.7 without this
+# text chunks should be handled as unknown ok.
+option TEXT on
+
+# this is used to turn off limits:
+option USER_LIMITS on
+option SET_USER_LIMITS on
+
+# these are just required for specific customizations
+option WRITE_CUSTOMIZE_ZTXT_COMPRESSION on
+option WRITE_CUSTOMIZE_COMPRESSION on

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/conftest/read.dfa

@@ -0,0 +1,58 @@
+# read.dfa
+#  Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+#  To the extent possible under law, the author has waived all copyright and
+#  related or neighboring rights to this work.  This work is published from:
+#  United States.
+#
+# Build libpng with basic read support.  This enables the lowest level libpng
+# read API - the one where the calling code has to use a loop to read each row.
+# At present this is the API used by most programs.
+#
+# Support is enabled only for those chunks and transformations that are
+# typically required - others can be added easily.
+#
+
+everything = off
+
+# The sequential read code is enabled here; the progressive code can be used
+# instead but there is no point enabling both.
+
+option SEQUENTIAL_READ on
+
+# Likewise it is pointless enabling both fixed and floating point APIs.  Choose
+# one or the other for both the API and the internal math.
+
+#Fixed point:
+#option FIXED_POINT on
+#option FLOATING_ARITHMETIC off
+
+#Floating point:
+option FLOATING_POINT on
+option FLOATING_ARITHMETIC on
+
+# Basic error handling, IO and user memory support.  The latter allows the
+# application program to provide its own implementations of 'malloc' and 'free'.
+option SETJMP on
+option STDIO on
+option USER_MEM on
+
+# To read the full set of PNG images correctly interlace, transparency and
+# 16-bit support is required.  The application can implement interlace itself,
+# but very few do and it's no longer possible to disable it when READ is
+# enabled.
+option READ_tRNS on
+option READ_16BIT on
+
+# Everything else is application dependent.  This file assumes the app handles
+# all the native PNG bit layouts, so it doesn't need any of layout change
+# transforms, but needs libpng to perform gamma correction.  It doesn't do any
+# colorspace stuff and ignores the 'significant bit' information.
+#
+# If your app always expands the image to a limited set of bit layouts you
+# probably want to consider using the simplified API instead of the low level
+# one - see png.h and s_read.dfa.
+option READ_GAMMA on

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/conftest/s_read.dfa

@@ -0,0 +1,35 @@
+# s_read.dfa
+#  Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+#  To the extent possible under law, the author has waived all copyright and
+#  related or neighboring rights to this work.  This work is published from:
+#  United States.
+#
+# Build libpng with simplified read support (only).  This builds a minimal
+# libpng able to read all PNG formats and convert them into a small number of
+# well understood memory formats.
+#
+
+everything = off
+
+option SIMPLIFIED_READ on
+
+# It isn't necessary to chose fixed or floating point for the APIs because the
+# simplified API doesn't need fixed or floating point numbers.  It is necessary
+# to chose an internal math implementation.  The default (because of 'everything
+# = off') is fixed point - turn the floating point implementation on if you have
+# hardware floating point or prefer your software floating point implementation.
+option FLOATING_ARITHMETIC on
+
+# This is not strictly necessary, but without it the message strings in the API
+# will not be filled in
+option ERROR_TEXT on
+
+# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't
+# need this if you don't use them, they just allow the in-memory layout to be
+# changed to match common hardware formats.
+option SIMPLIFIED_READ_AFIRST on
+option SIMPLIFIED_READ_BGR on

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/conftest/s_write.dfa

@@ -0,0 +1,33 @@
+# s_write.dfa
+#  Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+#  To the extent possible under law, the author has waived all copyright and
+#  related or neighboring rights to this work.  This work is published from:
+#  United States.
+#
+# Build libpng with (just) simplified write support
+#
+
+everything = off
+
+option SIMPLIFIED_WRITE on
+
+# It isn't necessary to chose fixed or floating point for the APIs because the
+# simplified API doesn't need fixed or floating point numbers.  It is necessary
+# to chose an internal math implementation.  The default (because of 'everything
+# = off') is fixed point - turn the floating point implementation on if you have
+# hardware floating point or prefer your software floating point implementation.
+option FLOATING_ARITHMETIC on
+
+# This is not strictly necessary, but without it the message strings in the API
+# will not be filled in
+option ERROR_TEXT on
+
+# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't
+# need this if you don't use them, they just allow the in-memory layout to be
+# changed to match common hardware formats.
+option SIMPLIFIED_WRITE_AFIRST on
+option SIMPLIFIED_WRITE_BGR on

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/conftest/simple.dfa

@@ -0,0 +1,36 @@
+# simple.dfa
+#  Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+#  To the extent possible under law, the author has waived all copyright and
+#  related or neighboring rights to this work.  This work is published from:
+#  United States.
+#
+# Build libpng with just the simplified APIs (read and write).
+#
+
+everything = off
+
+option SIMPLIFIED_WRITE on
+option SIMPLIFIED_READ on
+
+# It isn't necessary to chose fixed or floating point for the APIs because the
+# simplified API doesn't need fixed or floating point numbers.  It is necessary
+# to chose an internal math implementation.  The default (because of 'everything
+# = off') is fixed point - turn the floating point implementation on if you have
+# hardware floating point or prefer your software floating point implementation.
+option FLOATING_ARITHMETIC on
+
+# This is not strictly necessary, but without it the message strings in the API
+# will not be filled in
+option ERROR_TEXT on
+
+# Switching these options on enables the 'AFIRST' and 'BGR' formats - you don't
+# need this if you don't use them, they just allow the in-memory layout to be
+# changed to match common hardware formats.
+option SIMPLIFIED_READ_AFIRST on
+option SIMPLIFIED_READ_BGR on
+option SIMPLIFIED_WRITE_AFIRST on
+option SIMPLIFIED_WRITE_BGR on

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/conftest/write.dfa

@@ -0,0 +1,45 @@
+# write.dfa
+#  Build time configuration of libpng
+#
+# Author: John Bowler
+# Copyright: (c) John Bowler, 2013
+# Usage rights:
+#  To the extent possible under law, the author has waived all copyright and
+#  related or neighboring rights to this work.  This work is published from:
+#  United States.
+#
+# Build libpng with no read support and minimal write support.
+#
+
+everything = off
+
+# Switch on the write code - this makes a minimalist encoder
+
+option WRITE on
+
+# Choose fixed or floating point APIs and arithmetic.  The choices are
+# independent but normally they will match.  It is typically better to use the
+# floating point if you have floating point hardware.  If you don't know, or
+# (perhaps) to make libpng smaller used fixed point throughout.
+
+#Fixed point:
+#option FIXED_POINT on
+#option FLOATING_ARITHMETIC off
+
+#Floating point:
+option FLOATING_POINT on
+option FLOATING_ARITHMETIC on
+
+# Basic error handling, IO and user memory support.  The latter allows the
+# application program to provide its own implementations of 'malloc' and 'free'.
+option SETJMP on
+option STDIO on
+option USER_MEM on
+
+# Everything else is optional.  Unlike the read code in libpng the write code
+# does not need to deal with arbitrary formats, so only add support for things
+# you really do write!  For example you might only write sRGB images, sometimes
+# with transparency and never write 16 bit images, so:
+option WRITE_sRGB on
+option WRITE_tRNS on
+#option WRITE_16BIT off (this is the default with 'everything = off')

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/examples/README.txt

@@ -0,0 +1,24 @@
+
+This directory (contrib/examples) contains examples of libpng usage.
+
+NO COPYRIGHT RIGHTS ARE CLAIMED TO ANY OF THE FILES IN THIS DIRECTORY.
+
+To the extent possible under law, the authors have waived all copyright and
+related or neighboring rights to this work.  This work is published from:
+United States.
+
+The files may be used freely in any way.  The intention is that appropriate
+parts of the files be used in other libpng-using programs without any need for
+the authors of the using code to seek copyright or license from the original
+authors.
+
+The source code and comments in this directory are the original work of the
+people named below.  No other person or organization has made contributions to
+the work in this directory.
+
+ORIGINAL AUTHORS
+    The following people have contributed to the code in this directory.  None
+    of the people below claim any rights with regard to the contents of this
+    directory.
+
+    John Bowler <jbowler at acm.org>