@patleeman/pi-boy 0.1.0

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/libtests/timepng.c

@@ -0,0 +1,608 @@
+/* timepng.c
+ *
+ * Copyright (c) 2013,2016 John Cunningham Bowler
+ *
+ * Last changed in libpng 1.6.22 [May 26, 2016]
+ *
+ * This code is released under the libpng license.
+ * For conditions of distribution and use, see the disclaimer
+ * and license in png.h
+ *
+ * Load an arbitrary number of PNG files (from the command line, or, if there
+ * are no arguments on the command line, from stdin) then run a time test by
+ * reading each file by row or by image (possibly with transforms in the latter
+ * case).  The only output is a time as a floating point number of seconds with
+ * 9 decimal digits.
+ */
+#define _POSIX_C_SOURCE 199309L /* for clock_gettime */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <limits.h>
+
+#include <time.h>
+
+#if defined(HAVE_CONFIG_H) && !defined(PNG_NO_CONFIG_H)
+#  include <config.h>
+#endif
+
+/* Define the following to use this test against your installed libpng, rather
+ * than the one being built here:
+ */
+#ifdef PNG_FREESTANDING_TESTS
+#  include <png.h>
+#else
+#  include "../../png.h"
+#endif
+
+/* The following is to support direct compilation of this file as C++ */
+#ifdef __cplusplus
+#  define voidcast(type, value) static_cast<type>(value)
+#else
+#  define voidcast(type, value) (value)
+#endif /* __cplusplus */
+
+/* 'CLOCK_PROCESS_CPUTIME_ID' is one of the clock timers for clock_gettime.  It
+ * need not be supported even when clock_gettime is available.  It returns the
+ * 'CPU' time the process has consumed.  'CPU' time is assumed to include time
+ * when the CPU is actually blocked by a pending cache fill but not time
+ * waiting for page faults.  The attempt is to get a measure of the actual time
+ * the implementation takes to read a PNG ignoring the potentially very large IO
+ * overhead.
+ */
+#if defined (CLOCK_PROCESS_CPUTIME_ID) && defined(PNG_STDIO_SUPPORTED) &&\
+    defined(PNG_EASY_ACCESS_SUPPORTED) &&\
+    (PNG_LIBPNG_VER >= 10700 ? defined(PNG_READ_PNG_SUPPORTED) :\
+     defined (PNG_SEQUENTIAL_READ_SUPPORTED) &&\
+     defined(PNG_INFO_IMAGE_SUPPORTED))
+
+typedef struct
+{
+   FILE *input;
+   FILE *output;
+}  io_data;
+
+static PNG_CALLBACK(void, read_and_copy,
+      (png_structp png_ptr, png_bytep buffer, size_t cb))
+{
+   io_data *io = (io_data*)png_get_io_ptr(png_ptr);
+
+   if (fread(buffer, cb, 1, io->input) != 1)
+      png_error(png_ptr, strerror(errno));
+
+   if (fwrite(buffer, cb, 1, io->output) != 1)
+   {
+      perror("temporary file");
+      fprintf(stderr, "temporary file PNG write failed\n");
+      exit(1);
+   }
+}
+
+static void read_by_row(png_structp png_ptr, png_infop info_ptr,
+      FILE *write_ptr, FILE *read_ptr)
+{
+   /* These don't get freed on error, this is fine; the program immediately
+    * exits.
+    */
+   png_bytep row = NULL, display = NULL;
+   io_data io_copy;
+
+   if (write_ptr != NULL)
+   {
+      /* Set up for a copy to the temporary file: */
+      io_copy.input = read_ptr;
+      io_copy.output = write_ptr;
+      png_set_read_fn(png_ptr, &io_copy, read_and_copy);
+   }
+
+   png_read_info(png_ptr, info_ptr);
+
+   {
+      size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr);
+
+      row = voidcast(png_bytep,malloc(rowbytes));
+      display = voidcast(png_bytep,malloc(rowbytes));
+
+      if (row == NULL || display == NULL)
+         png_error(png_ptr, "OOM allocating row buffers");
+
+      {
+         png_uint_32 height = png_get_image_height(png_ptr, info_ptr);
+         int passes = png_set_interlace_handling(png_ptr);
+         int pass;
+
+         png_start_read_image(png_ptr);
+
+         for (pass = 0; pass < passes; ++pass)
+         {
+            png_uint_32 y = height;
+
+            /* NOTE: this trashes the row each time; interlace handling won't
+             * work, but this avoids memory thrashing for speed testing and is
+             * somewhat representative of an application that works row-by-row.
+             */
+            while (y-- > 0)
+               png_read_row(png_ptr, row, display);
+         }
+      }
+   }
+
+   /* Make sure to read to the end of the file: */
+   png_read_end(png_ptr, info_ptr);
+
+   /* Free this up: */
+   free(row);
+   free(display);
+}
+
+static PNG_CALLBACK(void, no_warnings, (png_structp png_ptr,
+         png_const_charp warning))
+{
+   (void)png_ptr;
+   (void)warning;
+}
+
+static int read_png(FILE *fp, png_int_32 transforms, FILE *write_file)
+{
+   png_structp png_ptr = png_create_read_struct(PNG_LIBPNG_VER_STRING,0,0,
+         no_warnings);
+   png_infop info_ptr = NULL;
+
+   if (png_ptr == NULL)
+      return 0;
+
+   if (setjmp(png_jmpbuf(png_ptr)))
+   {
+      png_destroy_read_struct(&png_ptr, &info_ptr, NULL);
+      return 0;
+   }
+
+#  ifdef PNG_BENIGN_ERRORS_SUPPORTED
+      png_set_benign_errors(png_ptr, 1/*allowed*/);
+#  endif
+   png_init_io(png_ptr, fp);
+
+   info_ptr = png_create_info_struct(png_ptr);
+
+   if (info_ptr == NULL)
+      png_error(png_ptr, "OOM allocating info structure");
+
+   if (transforms < 0)
+      read_by_row(png_ptr, info_ptr, write_file, fp);
+
+   else
+      png_read_png(png_ptr, info_ptr, transforms, NULL/*params*/);
+
+   png_destroy_read_struct(&png_ptr, &info_ptr, NULL);
+   return 1;
+}
+
+static int mytime(struct timespec *t)
+{
+   /* Do the timing using clock_gettime and the per-process timer. */
+   if (!clock_gettime(CLOCK_PROCESS_CPUTIME_ID, t))
+      return 1;
+
+   perror("CLOCK_PROCESS_CPUTIME_ID");
+   fprintf(stderr, "timepng: could not get the time\n");
+   return 0;
+}
+
+static int perform_one_test(FILE *fp, int nfiles, png_int_32 transforms)
+{
+   int i;
+   struct timespec before, after;
+
+   /* Clear out all errors: */
+   rewind(fp);
+
+   if (mytime(&before))
+   {
+      for (i=0; i<nfiles; ++i)
+      {
+         if (read_png(fp, transforms, NULL/*write*/))
+         {
+            if (ferror(fp))
+            {
+               perror("temporary file");
+               fprintf(stderr, "file %d: error reading PNG data\n", i);
+               return 0;
+            }
+         }
+
+         else
+         {
+            perror("temporary file");
+            fprintf(stderr, "file %d: error from libpng\n", i);
+            return 0;
+         }
+      }
+   }
+
+   else
+      return 0;
+
+   if (mytime(&after))
+   {
+      /* Work out the time difference and print it - this is the only output,
+       * so flush it immediately.
+       */
+      unsigned long s = after.tv_sec - before.tv_sec;
+      long ns = after.tv_nsec - before.tv_nsec;
+
+      if (ns < 0)
+      {
+         --s;
+         ns += 1000000000;
+
+         if (ns < 0)
+         {
+            fprintf(stderr, "timepng: bad clock from kernel\n");
+            return 0;
+         }
+      }
+
+      printf("%lu.%.9ld\n", s, ns);
+      fflush(stdout);
+      if (ferror(stdout))
+      {
+         fprintf(stderr, "timepng: error writing output\n");
+         return 0;
+      }
+
+      /* Successful return */
+      return 1;
+   }
+
+   else
+      return 0;
+}
+
+static int add_one_file(FILE *fp, char *name)
+{
+   FILE *ip = fopen(name, "rb");
+
+   if (ip != NULL)
+   {
+      /* Read the file using libpng; this detects errors and also deals with
+       * files which contain data beyond the end of the file.
+       */
+      int ok = 0;
+      fpos_t pos;
+
+      if (fgetpos(fp, &pos))
+      {
+         /* Fatal error reading the start: */
+         perror("temporary file");
+         fprintf(stderr, "temporary file fgetpos error\n");
+         exit(1);
+      }
+
+      if (read_png(ip, -1/*by row*/, fp/*output*/))
+      {
+         if (ferror(ip))
+         {
+            perror(name);
+            fprintf(stderr, "%s: read error\n", name);
+         }
+
+         else
+            ok = 1; /* read ok */
+      }
+
+      else
+         fprintf(stderr, "%s: file not added\n", name);
+
+      (void)fclose(ip);
+
+      /* An error in the output is fatal; exit immediately: */
+      if (ferror(fp))
+      {
+         perror("temporary file");
+         fprintf(stderr, "temporary file write error\n");
+         exit(1);
+      }
+
+      if (ok)
+         return 1;
+
+      /* Did not read the file successfully, simply rewind the temporary
+       * file.  This must happen after the ferror check above to avoid clearing
+       * the error.
+       */
+      if (fsetpos(fp, &pos))
+      {
+         perror("temporary file");
+         fprintf(stderr, "temporary file fsetpos error\n");
+         exit(1);
+      }
+   }
+
+   else
+   {
+      /* file open error: */
+      perror(name);
+      fprintf(stderr, "%s: open failed\n", name);
+   }
+
+   return 0; /* file not added */
+}
+
+static void
+usage(FILE *fp)
+{
+   if (fp != NULL) fclose(fp);
+
+   fprintf(stderr,
+"Usage:\n"
+" timepng --assemble <assembly> {files}\n"
+"  Read the files into <assembly>, output the count.  Options are ignored.\n"
+" timepng --dissemble <assembly> <count> [options]\n"
+"  Time <count> files from <assembly>, additional files may not be given.\n"
+" Otherwise:\n"
+"  Read the files into a temporary file and time the decode\n"
+"Transforms:\n"
+"  --by-image: read by image with png_read_png\n"
+"  --<transform>: implies by-image, use PNG_TRANSFORM_<transform>\n"
+"  Otherwise: read by row using png_read_row (to a single row buffer)\n"
+   /* ISO C90 string length max 509 */);fprintf(stderr,
+"{files}:\n"
+"  PNG files to copy into the assembly and time.  Invalid files are skipped\n"
+"  with appropriate error messages.  If no files are given the list of files\n"
+"  is read from stdin with each file name terminated by a newline\n"
+"Output:\n"
+"  For --assemble the output is the name of the assembly file followed by the\n"
+"  count of the files it contains; the arguments for --dissemble.  Otherwise\n"
+"  the output is the total decode time in seconds.\n");
+
+   exit(99);
+}
+
+int main(int argc, char **argv)
+{
+   int ok = 0;
+   int err = 0;
+   int nfiles = 0;
+   int transforms = -1; /* by row */
+   const char *assembly = NULL;
+   FILE *fp;
+
+   if (argc > 2 && strcmp(argv[1], "--assemble") == 0)
+   {
+      /* Just build the test file, argv[2] is the file name. */
+      assembly = argv[2];
+      fp = fopen(assembly, "wb");
+      if (fp == NULL)
+      {
+         perror(assembly);
+         fprintf(stderr, "timepng --assemble %s: could not open for write\n",
+               assembly);
+         usage(NULL);
+      }
+
+      argv += 2;
+      argc -= 2;
+   }
+
+   else if (argc > 3 && strcmp(argv[1], "--dissemble") == 0)
+   {
+      fp = fopen(argv[2], "rb");
+
+      if (fp == NULL)
+      {
+         perror(argv[2]);
+         fprintf(stderr, "timepng --dissemble %s: could not open for read\n",
+               argv[2]);
+         usage(NULL);
+      }
+
+      nfiles = atoi(argv[3]);
+      if (nfiles <= 0)
+      {
+         fprintf(stderr,
+               "timepng --dissemble <file> <count>: %s is not a count\n",
+               argv[3]);
+         exit(99);
+      }
+#ifdef __COVERITY__
+      else
+      {
+         nfiles &= PNG_UINT_31_MAX;
+      }
+#endif
+
+      argv += 3;
+      argc -= 3;
+   }
+
+   else /* Else use a temporary file */
+   {
+#ifndef __COVERITY__
+      fp = tmpfile();
+#else
+      /* Experimental. Coverity says tmpfile() is insecure because it
+       * generates predictable names.
+       *
+       * It is possible to satisfy Coverity by using mkstemp(); however,
+       * any platform supporting mkstemp() undoubtedly has a secure tmpfile()
+       * implementation as well, and doesn't need the fix.  Note that
+       * the fix won't work on platforms that don't support mkstemp().
+       *
+       * https://www.securecoding.cert.org/confluence/display/c/
+       * FIO21-C.+Do+not+create+temporary+files+in+shared+directories
+       * says that most historic implementations of tmpfile() provide
+       * only a limited number of possible temporary file names
+       * (usually 26) before file names are recycled. That article also
+       * provides a secure solution that unfortunately depends upon mkstemp().
+       */
+      char tmpfile[] = "timepng-XXXXXX";
+      int filedes;
+      umask(0177);
+      filedes = mkstemp(tmpfile);
+      if (filedes < 0)
+        fp = NULL;
+      else
+      {
+        fp = fdopen(filedes,"w+");
+        /* Hide the filename immediately and ensure that the file does
+         * not exist after the program ends
+         */
+        (void) unlink(tmpfile);
+      }
+#endif
+
+      if (fp == NULL)
+      {
+         perror("tmpfile");
+         fprintf(stderr, "timepng: could not open the temporary file\n");
+         exit(1); /* not a user error */
+      }
+   }
+
+   /* Handle the transforms: */
+   while (argc > 1 && argv[1][0] == '-' && argv[1][1] == '-')
+   {
+      const char *opt = *++argv + 2;
+
+      --argc;
+
+      /* Transforms turn on the by-image processing and maybe set some
+       * transforms:
+       */
+      if (transforms == -1)
+         transforms = PNG_TRANSFORM_IDENTITY;
+
+      if (strcmp(opt, "by-image") == 0)
+      {
+         /* handled above */
+      }
+
+#        define OPT(name) else if (strcmp(opt, #name) == 0)\
+         transforms |= PNG_TRANSFORM_ ## name
+
+      OPT(STRIP_16);
+      OPT(STRIP_ALPHA);
+      OPT(PACKING);
+      OPT(PACKSWAP);
+      OPT(EXPAND);
+      OPT(INVERT_MONO);
+      OPT(SHIFT);
+      OPT(BGR);
+      OPT(SWAP_ALPHA);
+      OPT(SWAP_ENDIAN);
+      OPT(INVERT_ALPHA);
+      OPT(STRIP_FILLER);
+      OPT(STRIP_FILLER_BEFORE);
+      OPT(STRIP_FILLER_AFTER);
+      OPT(GRAY_TO_RGB);
+      OPT(EXPAND_16);
+      OPT(SCALE_16);
+
+      else
+      {
+         fprintf(stderr, "timepng %s: unrecognized transform\n", opt);
+         usage(fp);
+      }
+   }
+
+   /* Handle the files: */
+   if (argc > 1 && nfiles > 0)
+      usage(fp); /* Additional files not valid with --dissemble */
+
+   else if (argc > 1)
+   {
+      int i;
+
+      for (i=1; i<argc; ++i)
+      {
+         if (nfiles == INT_MAX)
+         {
+            fprintf(stderr, "%s: skipped, too many files\n", argv[i]);
+            break;
+         }
+
+         else if (add_one_file(fp, argv[i]))
+            ++nfiles;
+      }
+   }
+
+   else if (nfiles == 0) /* Read from stdin withoout --dissemble */
+   {
+      char filename[FILENAME_MAX+1];
+
+      while (fgets(filename, FILENAME_MAX+1, stdin))
+      {
+         size_t len = strlen(filename);
+
+         if (filename[len-1] == '\n')
+         {
+            filename[len-1] = 0;
+            if (nfiles == INT_MAX)
+            {
+               fprintf(stderr, "%s: skipped, too many files\n", filename);
+               break;
+            }
+
+            else if (add_one_file(fp, filename))
+               ++nfiles;
+         }
+
+         else
+         {
+            fprintf(stderr, "timepng: file name too long: ...%s\n",
+               filename+len-32);
+            err = 1;
+            break;
+         }
+      }
+
+      if (ferror(stdin))
+      {
+         fprintf(stderr, "timepng: stdin: read error\n");
+         err = 1;
+      }
+   }
+
+   /* Perform the test, or produce the --assemble output: */
+   if (!err)
+   {
+      if (nfiles > 0)
+      {
+         if (assembly != NULL)
+         {
+            if (fflush(fp) && !ferror(fp) && fclose(fp))
+            {
+               perror(assembly);
+               fprintf(stderr, "%s: close failed\n", assembly);
+            }
+
+            else
+            {
+               printf("%s %d\n", assembly, nfiles);
+               fflush(stdout);
+               ok = !ferror(stdout);
+            }
+         }
+
+         else
+         {
+            ok = perform_one_test(fp, nfiles, transforms);
+            (void)fclose(fp);
+         }
+      }
+
+      else
+         usage(fp);
+   }
+
+   else
+      (void)fclose(fp);
+
+   /* Exit code 0 on success. */
+   return ok == 0;
+}
+#else /* !sufficient support */
+int main(void) { return 77; }
+#endif /* !sufficient support */

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/mips-msa/README

@@ -0,0 +1,83 @@
+OPERATING SYSTEM SPECIFIC MIPS MSA DETECTION
+--------------------------------------------
+
+Detection of the ability to execute MIPS MSA on an MIPS processor requires
+operating system support.  (The information is not available in user mode.)
+
+HOW TO USE THIS
+---------------
+
+This directory contains C code fragments that can be included in mips/mips_init.c
+by setting the macro PNG_MIPS_MSA_FILE to the file name in "" or <> at build
+time.  This setting is not recorded in pnglibconf.h and can be changed simply by
+rebuilding mips/msa_init.o with the required macro definition.
+
+For any of this code to be used the MIPS MSA code must be enabled and run time
+checks must be supported.  I.e.:
+
+#if PNG_MIPS_MSA_OPT > 0
+#ifdef PNG_MIPS_MSA_CHECK_SUPPORTED
+
+This is done in a 'configure' build by passing configure the argument:
+
+   --enable-mips-msa=check
+
+Apart from the basic Linux implementation in contrib/mips-msa/linux.c this code
+is unsupported.  That means that it is not even compiled on a regular basis and
+may be broken in any given minor release.
+
+FILE FORMAT
+-----------
+
+Each file documents its testing status as of the last time it was tested (which
+may have been a long time ago):
+
+STATUS: one of:
+   SUPPORTED: This indicates that the file is included in the regularly
+         performed test builds and bugs are fixed when discovered.
+   COMPILED: This indicates that the code did compile at least once.  See the
+         more detailed description for the extent to which the result was
+         successful.
+   TESTED: This means the code was fully compiled into the libpng test programs
+         and these were run at least once.
+
+BUG REPORTS: an email address to which to send reports of problems
+
+The file is a fragment of C code. It should not define any 'extern' symbols;
+everything should be static.  It must define the function:
+
+static int png_have_msa(png_structp png_ptr);
+
+That function must return 1 if MIPS MSA instructions are supported, 0 if not.
+It must not execute png_error unless it detects a bug.  A png_error will prevent
+the reading of the PNG and in the future, writing too.
+
+BUG REPORTS
+-----------
+
+If you mail a bug report for any file that is not SUPPORTED there may only be
+limited response.  Consider fixing it and sending a patch to fix the problem -
+this is more likely to result in action.
+
+CONTRIBUTIONS
+-------------
+
+You may send contributions of new implementations to
+png-mng-implement@sourceforge.net.  Please write code in strict C90 C where
+possible.  Obviously OS dependencies are to be expected.  If you submit code you
+must have the authors permission and it must have a license that is acceptable
+to the current maintainer; in particular that license must permit modification
+and redistribution.
+
+Please try to make the contribution a single file and give the file a clear and
+unambiguous name that identifies the target OS.  If multiple files really are
+required put them all in a sub-directory.
+
+You must also be prepared to handle bug reports from users of the code, either
+by joining the png-mng-implement mailing list or by providing an email for the
+"BUG REPORTS" entry or both.  Please make sure that the header of the file
+contains the STATUS and BUG REPORTS fields as above.
+
+Please list the OS requirements as precisely as possible.  Ideally you should
+also list the environment in which the code has been tested and certainly list
+any environments where you suspect it might not work.