@patleeman/pi-boy 0.1.0

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/testpngs/makepngs.sh

@@ -0,0 +1,94 @@
+#!/bin/sh
+#
+# Make a set of test PNG files, MAKEPNG is the name of the makepng executable
+# built from contrib/libtests/makepng.c
+
+# Copyright (c) 2015 John Cunningham Bowler
+
+# Last changed in libpng 1.6.20 [December 3, 2015]
+
+# This code is released under the libpng license.
+# For conditions of distribution and use, see the disclaimer
+# and license in png.h
+
+# The arguments say whether to build all the files or whether just to build the
+# ones that extend the code-coverage of libpng from the existing test files in
+# contrib/pngsuite.
+test -n "$MAKEPNG" || MAKEPNG=./makepng
+opts=
+
+mp(){
+   ${MAKEPNG} $opts $1 "$3" "$4" "$3-$4$2.png"
+}
+
+mpg(){
+   if test "$1" = "none"
+   then
+      mp "" "" "$2" "$3"
+   else
+      mp "--$1" "-$1" "$2" "$3"
+   fi
+}
+
+mptrans(){
+   if test "$1" = "none"
+   then
+      mp "--tRNS" "-tRNS" "$2" "$3"
+   else
+      mp "--tRNS --$1" "-$1-tRNS" "$2" "$3"
+   fi
+}
+
+case "$1" in
+   --small)
+      opts="--small";;&
+
+   --all|--small)
+      for g in none sRGB linear 1.8
+      do
+         for c in gray palette
+         do
+            for b in 1 2 4
+            do
+               mpg "$g" "$c" "$b"
+               mptrans "$g" "$c" "$b"
+            done
+         done
+
+         mpg "$g" palette 8
+         mptrans "$g" palette 8
+
+         for b in 8 16
+         do
+            for c in gray gray-alpha rgb rgb-alpha
+            do
+               mpg "$g" "$c" "$b"
+            done
+            for c in gray rgb
+            do
+               mptrans "$g" "$c" "$b"
+            done
+         done
+      done;;
+
+   --coverage)
+      # Comments below indicate cases known to be required and not duplicated
+      # in other (required) cases; the aim is to get a minimal set that gives
+      # the maximum code coverage.
+      mpg none gray-alpha 8 # required: code coverage, sRGB opaque component
+      mpg none palette 8 # required: basic palette read
+      mpg 1.8 gray 2 # required: tests gamma threshold code
+      mpg 1.8 palette 2 # required: code coverage
+      mpg 1.8 palette 4 # required: code coverage
+      mpg 1.8 palette 8 # error limits only
+      mpg linear palette 8 # error limits only
+      mpg linear rgb-alpha 16 # error limits only
+      mpg sRGB palette 1 # required: code coverage
+      mpg sRGB rgb-alpha 16 # required: code coverage: pngread.c:2422 untested
+      :;;
+
+   *)
+      echo "$0 $1: unknown argument, usage:" >&2
+      echo "  $0 [--all|--coverage|--small]" >&2
+      exit 1
+esac

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/tools/README.txt

@@ -0,0 +1,27 @@
+This directory (contrib/tools) contains tools used by the authors of libpng.
+
+Code and data placed in this directory is not required to build libpng,
+however the code in this directory has been used to generate data or code in
+the body of the libpng source.  The source code identifies where this has
+been done.  Code in this directory may not compile on all operating systems
+that libpng supports.
+
+NO COPYRIGHT RIGHTS ARE CLAIMED TO ANY OF THE FILES IN THIS DIRECTORY.
+
+To the extent possible under law, the authors have waived all copyright and
+related or neighboring rights to this work.  This work is published from:
+United States.
+
+The files may be used freely in any way.
+
+The source code and comments in this directory are the original work of the
+people named below.  No other person or organization has made contributions to
+the work in this directory.
+
+ORIGINAL AUTHORS
+    The following people have contributed to the code in this directory.  None
+    of the people below claim any rights with regard to the contents of this
+    directory.
+
+    John Bowler <jbowler at acm.org>
+    Glenn Randers-Pehrson <glennrp at users.sourceforge.net>

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/tools/checksum-icc.c

@@ -0,0 +1,102 @@
+/* checksum-icc.c
+ *
+ * Copyright (c) 2013 John Cunningham Bowler
+ *
+ * Last changed in libpng 1.6.0 [February 14, 2013]
+ *
+ * This code is released under the libpng license.
+ * For conditions of distribution and use, see the disclaimer
+ * and license in png.h
+ *
+ * Generate crc32 and adler32 checksums of the given input files, used to
+ * generate check-codes for use when matching ICC profiles within libpng.
+ */
+#include <stdio.h>
+
+#include <zlib.h>
+
+static int
+read_one_file(FILE *ip, const char *name)
+{
+   uLong length = 0;
+   uLong a32 = adler32(0, NULL, 0);
+   uLong c32 = crc32(0, NULL, 0);
+   Byte header[132];
+
+   for (;;)
+   {
+      int ch = getc(ip);
+      Byte b;
+
+      if (ch == EOF) break;
+
+      b = (Byte)ch;
+
+      if (length < sizeof header)
+         header[length] = b;
+
+      ++length;
+      a32 = adler32(a32, &b, 1);
+      c32 = crc32(c32, &b, 1);
+   }
+
+   if (ferror(ip))
+      return 0;
+
+   /* Success */
+   printf("PNG_ICC_CHECKSUM(0x%8.8lx, 0x%8.8lx,\n   PNG_MD5("
+      "0x%2.2x%2.2x%2.2x%2.2x, 0x%2.2x%2.2x%2.2x%2.2x, 0x%2.2x%2.2x%2.2x%2.2x,"
+      " 0x%2.2x%2.2x%2.2x%2.2x), %d,\n"
+      "   \"%4.4d/%2.2d/%2.2d %2.2d:%2.2d:%2.2d\", %lu, \"%s\")\n",
+      (unsigned long)a32, (unsigned long)c32,
+      header[84], header[85], header[86], header[87],
+      header[88], header[89], header[90], header[91],
+      header[92], header[93], header[94], header[95],
+      header[96], header[97], header[98], header[99],
+#     define u16(x) (header[x] * 256 + header[x+1])
+#     define u32(x) (u16(x) * 65536 + u16(x+2))
+      u32(64), u16(24), u16(26), u16(28), u16(30), u16(32), u16(34),
+      (unsigned long)length, name);
+
+   return 1;
+}
+
+int main(int argc, char **argv)
+{
+   int err = 0;
+
+   printf("/* adler32, crc32, MD5[16], intent, date, length, file-name */\n");
+
+   if (argc > 1)
+   {
+      int i;
+
+      for (i=1; i<argc; ++i)
+      {
+         FILE *ip = fopen(argv[i], "rb");
+
+         if (ip == NULL || !read_one_file(ip, argv[i]))
+         {
+            err = 1;
+            perror(argv[i]);
+            fprintf(stderr, "%s: read error\n", argv[i]);
+            printf("/* ERROR: %s */\n", argv[i]);
+         }
+
+         (void)fclose(ip);
+      }
+   }
+
+   else
+   {
+      if (!read_one_file(stdin, "-"))
+      {
+         err = 1;
+         perror("stdin");
+         fprintf(stderr, "stdin: read error\n");
+         printf("/* ERROR: stdin */\n");
+      }
+   }
+
+   return err;
+}

package/mgba-bridge/vendor/mgba/src/third-party/libpng/contrib/tools/chkfmt

@@ -0,0 +1,144 @@
+#!/bin/sh
+
+# chkfmt
+#
+# COPYRIGHT: Written by John Cunningham Bowler, 2010.
+# To the extent possible under law, the author has waived all copyright and
+# related or neighboring rights to this work.  This work is published from:
+# United States.
+#
+# Check the format of the source files in the current directory - checks for a
+# line length of 80 characters max and no tab characters.
+#
+# Optionally arguments are files or directories to check.
+#
+# -v: output the long lines (makes fixing them easier)
+# -e: spawn an editor for each file that needs a change ($EDITOR must be
+#     defined).  When using -e the script MUST be run from an interactive
+#     command line.
+verbose=
+edit=
+vers=
+test "$1" = "-v" && {
+   shift
+   verbose=yes
+}
+test "$1" = "-e" && {
+   shift
+   if test -n "$EDITOR"
+   then
+      edit=yes
+
+      # Copy the standard streams for the editor
+      exec 3>&0 4>&1 5>&2
+   else
+      echo "chkfmt -e: EDITOR must be defined" >&2
+      exit 1
+   fi
+}
+
+# Function to edit a single file - if the file isn't changed ask the user
+# whether or not to continue.  This stuff only works if the script is run from
+# the command line (otherwise, don't specify -e or you will be sorry).
+doed(){
+   cp "$file" "$file".orig
+   "$EDITOR" "$file" 0>&3 1>&4 2>&5 3>&- 4>&- 5>&- || exit 1
+   if cmp -s "$file".orig "$file"
+   then
+      rm "$file".orig
+      echo -n "$file: file not changed, type anything to continue: " >&5
+      read ans 0>&3
+      test -n "$ans" || return 1
+   fi
+   return 0
+}
+
+# In beta versions the version string which appears in files can be a little
+# long and cause spuriously overlong lines.  To avoid this substitute the version
+# string with a 'standard' version a.b.cc before checking for long lines.
+if test -r png.h
+then
+   vers="`sed -n -e \
+   's/^#define PNG_LIBPNG_VER_STRING .\([0-9]\.[0-9]\.[0-9][0-9a-z]*\).$/\1/p' \
+   png.h`"
+   echo "chkfmt: checking version $vers"
+fi
+if test -z "$vers"
+then
+   echo "chkfmt: png.h not found, ignoring version number" >&2
+fi
+
+test -n "$1" || set -- .
+find "$@" \( -type d \( -name '.git' -o -name '.libs' -o -name 'projects' \) \
+   -prune \) -o \( -type f \
+   ! -name '*.[oa]' ! -name '*.l[oa]' !  -name '*.png' ! -name '*.out' \
+   ! -name '*.jpg' ! -name '*.patch' ! -name '*.obj' ! -name '*.exe' \
+   ! -name '*.com' ! -name '*.tar.*' ! -name '*.zip' ! -name '*.ico' \
+   ! -name '*.res' ! -name '*.rc' ! -name '*.mms' ! -name '*.rej' \
+   ! -name '*.dsp' ! -name '*.orig' ! -name '*.dfn' ! -name '*.swp' \
+   ! -name '~*' ! -name '*.3' \
+   ! -name 'missing' ! -name 'mkinstalldirs' ! -name 'depcomp' \
+   ! -name 'aclocal.m4' ! -name 'install-sh' ! -name 'Makefile.in' \
+   ! -name 'ltmain.sh' ! -name 'config*' -print \) | {
+   st=0
+   while read file
+   do
+      case "$file" in
+      *.mak|*[Mm]akefile.*|*[Mm]akefile)
+         # Makefiles require tabs, dependency lines can be this long.
+         check_tabs=
+         line_length=100;;
+      *.awk)
+         # Includes literal tabs
+         check_tabs=
+         # The following is arbitrary
+         line_length=132;;
+      *contrib/*/*.[ch])
+         check_tabs=yes
+         line_length=96;;
+      *)
+         check_tabs=yes
+         line_length=80;;
+      esac
+
+      # Note that vers can only contain 0-9, . and a-z
+      if test -n "$vers"
+      then
+         sed -e "s/$vers/a.b.cc/g" "$file" >"$file".$$
+      else
+         cp "$file" "$file".$$
+      fi
+      splt="`fold -$line_length "$file".$$ | diff -c "$file".$$ -`"
+      rm "$file".$$
+
+      if test -n "$splt"
+      then
+         echo "$file: lines too long"
+         st=1
+         if test -n "$EDITOR" -a -n "$edit"
+         then
+            doed "$file" || exit 1
+         elif test -n "$verbose"
+         then
+            echo "$splt"
+         fi
+      fi
+      if test -n "$check_tabs"
+      then
+         tab="`tr -c -d '\t' <"$file"`"
+         if test -n "$tab"
+         then
+            echo "$file: file contains tab characters"
+            st=1
+            if test -n "$EDITOR" -a -n "$edit"
+            then
+               doed "$file" || exit 1
+            elif test -n "$verbose"
+            then
+               echo "$splt"
+            fi
+         fi
+      fi
+   done
+   exit $st
+}