079project 1.0.0

package/Redis-8.0.3-Windows-x64-cygwin-with-Service/redis-full.conf

@@ -0,0 +1,376 @@
+include redis.conf
+
+loadmodule ./modules/redisbloom/redisbloom.so
+loadmodule ./modules/redisearch/redisearch.so
+loadmodule ./modules/redisjson/rejson.so
+loadmodule ./modules/redistimeseries/redistimeseries.so
+
+############################## QUERY ENGINE CONFIG ############################
+
+# Keep numeric ranges in numeric tree parent nodes of leafs for `x` generations.
+# numeric, valid range: [0, 2], default: 0
+#
+# search-_numeric-ranges-parents 0
+
+# The number of iterations to run while performing background indexing
+# before we call usleep(1) (sleep for 1 micro-second) and make sure that we
+# allow redis to process other commands.
+# numeric, valid range: [1, UINT32_MAX], default: 100
+#
+# search-bg-index-sleep-gap 100
+
+# The default dialect used in search queries.
+# numeric, valid range: [1, 4], default: 1
+#
+# search-default-dialect 1
+
+# the fork gc will only start to clean when the number of not cleaned document
+# will exceed this threshold.
+# numeric, valid range: [1, LLONG_MAX], default: 100
+#
+# search-fork-gc-clean-threshold 100
+
+# interval (in seconds) in which to retry running the forkgc after failure.
+# numeric, valid range: [1, LLONG_MAX], default: 5
+#
+# search-fork-gc-retry-interval 5
+
+# interval (in seconds) in which to run the fork gc (relevant only when fork
+# gc is used).
+# numeric, valid range: [1, LLONG_MAX], default: 30
+#
+# search-fork-gc-run-interval 30
+
+# the amount of seconds for the fork GC to sleep before exiting.
+# numeric, valid range: [0, LLONG_MAX], default: 0
+#
+# search-fork-gc-sleep-before-exit 0
+
+# Scan this many documents at a time during every GC iteration.
+# numeric, valid range: [1, LLONG_MAX], default: 100
+#
+# search-gc-scan-size 100
+
+# Max number of cursors for a given index that can be opened inside of a shard.
+# numeric, valid range: [0, LLONG_MAX], default: 128
+#
+# search-index-cursor-limit 128
+
+# Maximum number of results from ft.aggregate command.
+# numeric, valid range: [0, (1ULL << 31)], default: 1ULL << 31
+#
+# search-max-aggregate-results 2147483648
+
+# Maximum prefix expansions to be used in a query.
+# numeric, valid range: [1, LLONG_MAX], default: 200
+#
+# search-max-prefix-expansions 200
+
+# Maximum runtime document table size (for this process).
+# numeric, valid range: [1, 100000000], default: 1000000
+#
+# search-max-doctablesize 1000000
+
+# max idle time allowed to be set for cursor, setting it high might cause
+# high memory consumption.
+# numeric, valid range: [1, LLONG_MAX], default: 300000
+#
+# search-cursor-max-idle 300000
+
+# Maximum number of results from ft.search command.
+# numeric, valid range: [0, 1ULL << 31], default: 1000000
+#
+# search-max-search-results 1000000
+
+# Number of worker threads to use for background tasks when the server is
+# in an operation event.
+# numeric, valid range: [1, 16], default: 4
+#
+# search-min-operation-workers 4
+
+# Minimum length of term to be considered for phonetic matching.
+# numeric, valid range: [1, LLONG_MAX], default: 3
+#
+# search-min-phonetic-term-len 3
+
+# the minimum prefix for expansions (`*`).
+# numeric, valid range: [1, LLONG_MAX], default: 2
+#
+# search-min-prefix 2
+
+# the minimum word length to stem.
+# numeric, valid range: [2, UINT32_MAX], default: 4
+#
+# search-min-stem-len 4
+
+# Delta used to increase positional offsets between array
+# slots for multi text values.
+# Can control the level of separation between phrases in different
+# array slots (related to the SLOP parameter of ft.search command)"
+# numeric, valid range: [1, UINT32_MAX], default: 100
+#
+# search-multi-text-slop 100
+
+# Used for setting the buffer limit threshold for vector similarity tiered
+# HNSW index, so that if we are using WORKERS for indexing, and the
+# number of vectors waiting in the buffer to be indexed exceeds this limit,
+# we insert new vectors directly into HNSW.
+# numeric, valid range: [0, LLONG_MAX], default: 1024
+#
+# search-tiered-hnsw-buffer-limit 1024
+
+# Query timeout.
+# numeric, valid range: [1, LLONG_MAX], default: 500
+#
+# search-timeout 500
+
+# minimum number of iterators in a union from which the iterator will
+# will switch to heap-based implementation.
+# numeric, valid range: [1, LLONG_MAX], default: 20
+# switch to heap based implementation.
+#
+# search-union-iterator-heap 20
+
+# The maximum memory resize for vector similarity indexes (in bytes).
+# numeric, valid range: [0, UINT32_MAX], default: 0
+#
+# search-vss-max-resize 0
+
+# Number of worker threads to use for query processing and background tasks.
+# numeric, valid range: [0, 16], default: 0
+# This configuration also affects the number of connections per shard.
+#
+# search-workers 0
+
+# The number of high priority tasks to be executed at any given time by the
+# worker thread pool, before executing low priority tasks. After this number
+# of high priority tasks are being executed, the worker thread pool will
+# execute high and low priority tasks alternately.
+# numeric, valid range: [0, LLONG_MAX], default: 1
+#
+# search-workers-priority-bias-threshold 1
+
+# Load extension scoring/expansion module. Immutable.
+# string, default: ""
+#
+# search-ext-load ""
+
+# Path to Chinese dictionary configuration file (for Chinese tokenization). Immutable.
+# string, default: ""
+#
+# search-friso-ini ""
+
+# Action to perform when search timeout is exceeded (choose RETURN or FAIL).
+# enum, valid values: ["return", "fail"], default: "fail"
+#
+# search-on-timeout fail
+
+# Determine whether some index resources are free on a second thread.
+# bool, default: yes
+#
+# search-_free-resource-on-thread yes
+
+# Enable legacy compression of double to float.
+# bool, default: no
+#
+# search-_numeric-compress no
+
+# Disable print of time for ft.profile. For testing only.
+# bool, default: yes
+#
+# search-_print-profile-clock yes
+
+# Intersection iterator orders the children iterators by their relative estimated
+# number of results in ascending order, so that if we see first iterators with
+# a lower count of results we will skip a larger number of results, which
+# translates into faster iteration. If this flag is set, we use this
+# optimization in a way where union iterators are being factorize by the number
+# of their own children, so that we sort by the number of children times the
+# overall estimated number of results instead.
+# bool, default: no
+#
+# search-_prioritize-intersect-union-children no
+
+# Set to run without memory pools.
+# bool, default: no
+#
+# search-no-mem-pools no
+
+# Disable garbage collection (for this process).
+# bool, default: no
+#
+# search-no-gc no
+
+# Enable commands filter which optimize indexing on partial hash updates.
+# bool, default: no
+#
+# search-partial-indexed-docs no
+
+# Disable compression for DocID inverted index. Boost CPU performance.
+# bool, default: no
+#
+# search-raw-docid-encoding no
+
+# Number of search threads in the coordinator thread pool.
+# numeric, valid range: [1, LLONG_MAX], default: 20
+#
+# search-threads 20
+
+# Timeout for topology validation (in milliseconds). After this timeout,
+# any pending requests will be processed, even if the topology is not fully connected.
+# numeric, valid range: [0, LLONG_MAX], default: 30000
+#
+# search-topology-validation-timeout 30000
+
+
+############################## TIME SERIES CONFIG #############################
+
+# The maximal number of per-shard threads for cross-key queries when using cluster mode
+# (TS.MRANGE, TS.MREVRANGE, TS.MGET, and TS.QUERYINDEX).
+# Note: increasing this value may either increase or decrease the performance.
+# integer, valid range: [1..16], default: 3
+# This is a load-time configuration parameter.
+#
+# ts-num-threads 3
+
+
+# Default compaction rules for newly created key with TS.ADD, TS.INCRBY, and TS.DECRBY.
+# Has no effect on keys created with TS.CREATE.
+# This default value is applied to each new time series upon its creation.
+# string, see documentation for rules format, default: no compaction rules
+#
+# ts-compaction-policy ""
+
+# Default chunk encoding for automatically-created compacted time series.
+# This default value is applied to each new compacted time series automatically
+# created when ts-compaction-policy is specified.
+# valid values: COMPRESSED, UNCOMPRESSED, default: COMPRESSED
+#
+# ts-encoding COMPRESSED
+
+
+# Default retention period, in milliseconds. 0 means no expiration.
+# This default value is applied to each new time series upon its creation.
+# If ts-compaction-policy is specified - it is overridden for created
+# compactions as specified in ts-compaction-policy.
+# integer, valid range: [0 .. LLONG_MAX], default: 0
+#
+# ts-retention-policy 0
+
+# Default policy for handling insertion (TS.ADD and TS.MADD) of multiple
+# samples with identical timestamps.
+# This default value is applied to each new time series upon its creation.
+# string, valid values: BLOCK, FIRST, LAST, MIN, MAX, SUM, default: BLOCK
+#
+# ts-duplicate-policy BLOCK
+
+# Default initial allocation size, in bytes, for the data part of each new chunk
+# This default value is applied to each new time series upon its creation.
+# integer, valid range: [48 .. 1048576]; must be a multiple of 8, default: 4096
+#
+# ts-chunk-size-bytes 4096
+
+# Default values for newly created time series.
+# Many sensors report data periodically. Often, the difference between the measured
+# value and the previous measured value is negligible and related to random noise
+# or to measurement accuracy limitations. In such situations it may be preferable
+# not to add the new measurement to the time series.
+# A new sample is considered a duplicate and is ignored if the following conditions are met:
+# - The time series is not a compaction;
+# - The time series' DUPLICATE_POLICY IS LAST;
+# - The sample is added in-order (timestamp >= max_timestamp);
+# - The difference of the current timestamp from the previous timestamp
+#   (timestamp - max_timestamp) is less than or equal to ts-ignore-max-time-diff
+# - The absolute value difference of the current value from the value at the previous maximum timestamp
+#   (abs(value - value_at_max_timestamp) is less than or equal to ts-ignore-max-val-diff.
+# where max_timestamp is the timestamp of the sample with the largest timestamp in the time series,
+# and value_at_max_timestamp is the value at max_timestamp.
+# ts-ignore-max-time-diff: integer, valid range: [0 .. LLONG_MAX], default: 0
+# ts-ignore-max-val-diff: double, Valid range: [0 .. DBL_MAX], default: 0
+#
+# ts-ignore-max-time-diff 0
+# ts-ignore-max-val-diff 0
+
+
+########################### BLOOM FILTERS CONFIG ##############################
+
+# Defaults values for new Bloom filters created with BF.ADD, BF.MADD, BF.INSERT, and BF.RESERVE
+# These defaults are applied to each new Bloom filter upon its creation.
+
+# Error ratio
+# The desired probability for false positives.
+# For a false positive rate of 0.1% (1 in 1000) - the value should be 0.001.
+# double, Valid range: (0 .. 1), value greater than 0.25 is treated as 0.25, default: 0.01
+#
+# bf-error-rate 0.01
+
+# Initial capacity
+# The number of entries intended to be added to the filter.
+# integer, valid range: [1 .. 1GB], default: 100
+#
+# bf-initial-size 100
+
+# Expansion factor
+# When capacity is reached, an additional sub-filter is created.
+# The size of the new sub-filter is the size of the last sub-filter multiplied
+# by expansion.
+# integer, [0 .. 32768]. 0 is equivalent to NONSCALING. default: 2
+#
+# bf-expansion-factor 2
+
+
+########################### CUCKOO FILTERS CONFIG #############################
+
+# Defaults values for new Cuckoo filters created with
+# CF.ADD, CF.ADDNX, CF.INSERT, CF.INSERTNX, and CF.RESERVE
+# These defaults are applied to each new Cuckoo filter upon its creation.
+
+# Initial capacity
+# A filter will likely not fill up to 100% of its capacity.
+# Make sure to reserve extra capacity if you want to avoid expansions.
+# value is rounded to the next 2^n integer.
+# integer, valid range: [2*cf-bucket-size .. 1GB], default: 1024
+#
+# cf-initial-size 1024
+
+# Number of items in each bucket
+# The minimal false positive rate is 2/255 ~ 0.78% when bucket size of 1 is used.
+# Larger buckets increase the error rate linearly, but improve the fill rate.
+# integer, valid range: [1 .. 255], default: 2
+#
+# cf-bucket-size 2
+
+# Maximum iterations
+# Number of attempts to swap items between buckets before declaring filter
+# as full and creating an additional filter.
+# A lower value improves performance. A higher value improves fill rate.
+# integer, Valid range: [1 .. 65535], default: 20
+#
+# cf-max-iterations 20
+
+# Expansion factor
+# When a new filter is created, its size is the size of the current filter
+# multiplied by this factor.
+# integer, Valid range: [0 .. 32768], 0 is equivalent to NONSCALING, default: 1
+#
+# cf-expansion-factor 1
+
+# Maximum expansions
+# integer, Valid range: [1 .. 65536], default: 32
+#
+# cf-max-expansions 32
+
+
+################################## SECURITY ###################################
+#
+# The following is a list of command categories and their meanings:
+#
+# * search - Query engine related.
+# * json - Data type: JSON related.
+# * timeseries -  Data type: time series related.
+# * bloom - Data type:  Bloom filter related.
+# * cuckoo - Data type: cuckoo filter related.
+# * topk -  Data type: top-k related.
+# * cms - Data type: count-min sketch related.
+# * tdigest -  Data type: t-digest related.
+