webruby 0.2.7 → 0.9.1

data/modules/mruby/doc/mrbgems/README.md

@@ -10,60 +10,63 @@ build configuration (i.e. *build_config.rb*), mrbgems will be activated and the
 extension integrated.
 
 To add a GEM into the *build_config.rb* add the following line for example:
-
-	conf.gem '/path/to/your/gem/dir'
+```ruby
+conf.gem '/path/to/your/gem/dir'
+```
 
 You can also use a relative path which would be relative from the mruby root:
-
-	conf.gem 'examples/mrbgems/ruby_extension_example'
+```ruby
+conf.gem 'examples/mrbgems/ruby_extension_example'
+```
 
 A remote GIT repository location for a GEM is also supported:
+```ruby
+conf.gem :git => 'https://github.com/masuidrive/mrbgems-example.git', :branch => 'master'
+conf.gem :github => 'masuidrive/mrbgems-example', :branch => 'master'
+conf.gem :bitbucket => 'mruby/mrbgems-example', :branch => 'master'
+```
 
-	conf.gem :git => 'https://github.com/masuidrive/mrbgems-example.git', :branch => 'master'
-
-	conf.gem :github => 'masuidrive/mrbgems-example', :branch => 'master'
-
-	conf.gem :bitbucket => 'mruby/mrbgems-example', :branch => 'master'
-
-To pull all gems from remote GIT repository on build, call ```./minirake -p```, 
+To pull all gems from remote GIT repository on build, call ```./minirake -p```,
 or ```./minirake --pull-gems```.
 
 NOTE: `:bitbucket` option supports only git. Hg is unsupported in this version.
 
 ## GemBox
 
-There are instances when you wish to add a collection of mrbgems into mruby at 
+There are instances when you wish to add a collection of mrbgems into mruby at
 once, or be able to substitute mrbgems based on configuration, without having to
-add each gem to the *build_config.rb* file.  A packaged collection of mrbgems 
-is called a GemBox.  A GemBox is a file that contains a list of mrbgems to load 
+add each gem to the *build_config.rb* file.  A packaged collection of mrbgems
+is called a GemBox.  A GemBox is a file that contains a list of mrbgems to load
 into mruby, in the same format as if you were adding them to *build_config.rb*
-via `config.gem`, but wrapped in an `MRuby::GemBox` object.  GemBoxes are 
+via `config.gem`, but wrapped in an `MRuby::GemBox` object.  GemBoxes are
 loaded into mruby via `config.gembox 'boxname'`.
 
 Below we have created a GemBox containing *mruby-time* and *mrbgems-example*:
-
-    MRuby::GemBox.new do |conf|
-      conf.gem "#{root}/mrbgems/mruby-time"
-      conf.gem :github => 'masuidrive/mrbgems-example'
-    end
+```ruby
+MRuby::GemBox.new do |conf|
+  conf.gem "#{root}/mrbgems/mruby-time"
+  conf.gem :github => 'masuidrive/mrbgems-example'
+end
+```
 
 As mentioned, the GemBox uses the same conventions as `MRuby::Build`.  The GemBox
 must be saved with a *.gembox* extension inside the *mrbgems* directory to to be
 picked up by mruby.
 
-To use this example GemBox, we save it as `custom.gembox` inside the *mrbgems* 
-directory in mruby, and add the following to our *build_config.rb* file inside 
+To use this example GemBox, we save it as `custom.gembox` inside the *mrbgems*
+directory in mruby, and add the following to our *build_config.rb* file inside
 the build block:
-
-    conf.gembox 'custom'
-
+```ruby
+conf.gembox 'custom'
+```
 This will cause the *custom* GemBox to be read in during the build process,
 adding *mruby-time* and *mrbgems-example* to the build.
 
-If you want, you can put GemBox outside of mruby directory. In that case you must 
-specify absolute path like below.
-
-	conf.gembox "#{ENV["HOME"]}/mygemboxes/custom"
+If you want, you can put GemBox outside of mruby directory. In that case you must
+specify an absolute path like below.
+```ruby
+conf.gembox "#{ENV["HOME"]}/mygemboxes/custom"
+```
 
 There are two GemBoxes that ship with mruby: [default](../../mrbgems/default.gembox)
 and [full-core](../../mrbgems/full-core.gembox). The [default](../../mrbgems/default.gembox) GemBox
@@ -75,6 +78,8 @@ contains every gem found in the *mrbgems* directory.
 The maximal GEM structure looks like this:
 
 	+- GEM_NAME         <- Name of GEM
+	   |
+	   +- include/      <- Header for Ruby extension (will exported)
 	   |
 	   +- mrblib/       <- Source for Ruby extension
 	   |
@@ -87,20 +92,22 @@ The maximal GEM structure looks like this:
 	   +- README.md     <- Readme for GEM
 
 The folder *mrblib* contains pure Ruby files to extend mruby. The folder *src*
-contains C files to extend mruby. The folder *test* contains C and pure Ruby files
-for testing purposes which will be used by `mrbtest`. *mrbgem.rake* contains
-the specification to compile C and Ruby files. *README.md* is a short description
-of your GEM.
+contains C/C++ files to extend mruby. The folder *include* contains C/C++ header
+files. The folder *test* contains C/C++ and pure Ruby files for testing purposes
+which will be used by `mrbtest`. *mrbgem.rake* contains the specification
+to compile C and Ruby files. *README.md* is a short description of your GEM.
 
 ## Build process
 
 mrbgems expects a specification file called *mrbgem.rake* inside of your
 GEM directory. A typical GEM specification could look like this for example:
-
-	MRuby::Gem::Specification.new('c_and_ruby_extension_example') do |spec|
-	  spec.license = 'MIT'
-	  spec.author  = 'mruby developers'
-	end
+```ruby
+MRuby::Gem::Specification.new('c_and_ruby_extension_example') do |spec|
+  spec.license = 'MIT'
+  spec.author  = 'mruby developers'
+  spec.summary = 'Example mrbgem using C and ruby'
+end
+```
 
 The mrbgems build process will use this specification to compile Object and Ruby
 files. The compilation results will be added to *lib/libmruby.a*. This file exposes
@@ -113,29 +120,71 @@ information purpose:
 * `spec.author` or `spec.authors` (Developer name or a list of them)
 * `spec.version` (Current version)
 * `spec.description` (Detailed description)
-* `spec.summary` (Short summary)
+* `spec.summary`
+  * One line short description of mrbgem.
+  * Printed in build summary of rake when set.
 * `spec.homepage` (Homepage)
 * `spec.requirements` (External requirements as information for user)
 
-The license and author properties are required in every GEM!
+The `license` and `author` properties are required in every GEM!
 
 In case your GEM is depending on other GEMs please use
-`spec.add_dependency(gem, *requirements)` like:
-
-	MRuby::Gem::Specification.new('c_and_ruby_extension_example') do |spec|
-	  spec.license = 'MIT'
-	  spec.author  = 'mruby developers'
-
-	  # add GEM dependency mruby-parser.
-	  # Version has to be between 1.0.0 and 1.5.2
-	  spec.add_dependency('mruby-parser', '> 1.0.0', '< 1.5.2')
-	end
-
-The usage of versions is optional.
-
-__ATTENTION:__
-The dependency system is currently (May 2013) under development and doesn't check
-or resolve dependencies!
+`spec.add_dependency(gem, *requirements[, default_get_info])` like:
+```ruby
+MRuby::Gem::Specification.new('c_and_ruby_extension_example') do |spec|
+  spec.license = 'MIT'
+  spec.author  = 'mruby developers'
+
+  # Add GEM dependency mruby-parser.
+  # The version must be between 1.0.0 and 1.5.2 .
+  spec.add_dependency('mruby-parser', '>= 1.0.0', '<= 1.5.2')
+
+  # Use any version of mruby-uv from github.
+  spec.add_dependency('mruby-uv', '>= 0.0.0', :github => 'mattn/mruby-uv')
+
+  # Use latest mruby-onig-regexp from github. (version requirements can be ignored)
+  spec.add_dependency('mruby-onig-regexp', :github => 'mattn/mruby-onig-regexp')
+end
+```
+
+The version requirements and default gem information are optional.
+
+Version requirement supports following operators:
+* '=': is equal
+* '!=': is not equal
+* '>': is greater
+* '<': is lesser
+* '>=': is equal or greater
+* '<=': is equal or lesser
+* '~>': is equal or greater and is lesser than the next major version
+    * example 1: '~> 2.2.2' means '>= 2.2.2' and '< 2.3.0'
+    * example 2: '~> 2.2'   means '>= 2.2.0' and '< 3.0.0'
+
+When more than one version requirements is passed, the dependency must satisfy all of it.
+
+You can have default gem to use as depedency when it's not defined in *build_config.rb*.
+When the last argument of `add_dependency` call is `Hash`, it will be treated as default gem information.
+Its format is same as argument of method `MRuby::Build#gem`, expect that it can't be treated as path gem location.
+
+When a special version of depedency is required,
+use `MRuby::Build#gem` in *build_config.rb* to override default gem.
+
+If you have conflicting GEMs use the following method:
+* `spec.add_conflict(gem, *requirements)`
+    * The `requirements` argument is same as in `add_dependency` method.
+
+like following code:
+```ruby
+MRuby::Gem::Specification.new 'some-regexp-binding' do |spec|
+  spec.license = 'BSD'
+  spec.author = 'John Doe'
+
+  spec.add_conflict 'mruby-onig-regexp', '> 0.0.0'
+  spec.add_conflict 'mruby-hs-regexp'
+  spec.add_conflict 'mruby-pcre-regexp'
+  spec.add_conflict 'mruby-regexp-pcre'
+end
+```
 
 In case your GEM has more complex build requirements you can use
 the following options additionally inside of your GEM specification:
@@ -151,6 +200,19 @@ the following options additionally inside of your GEM specification:
 * `spec.test_objs` (Object test files for integration into mrbtest)
 * `spec.test_preload` (Initialization files for mrbtest)
 
+### include_paths and depencency
+
+Your GEM can export include paths to another GEMs that depends on your GEM.
+By default, `/...absolute path.../{GEM_NAME}/include` will be exported.
+So it is recommended not to put GEM's local header files on include/.
+
+These exports are retroactive.
+For example: when B depends to C and A depends to B, A will get include paths exported by C.
+
+Exported include_paths are automatically appended to GEM local include_paths by Minirake.
+You can use `spec.export_include_paths` accessor if you want more complex build.
+
+
 ## C Extension
 
 mruby can be extended with C. This is possible by using the C API to
@@ -162,12 +224,13 @@ mrbgems expects that you have implemented a C method called
 `mrb_YOURGEMNAME_gem_init(mrb_state)`. `YOURGEMNAME` will be replaced
 by the name of your GEM. If you call your GEM *c_extension_example*, your
 initialisation method could look like this:
-
-	void
-	mrb_c_extension_example_gem_init(mrb_state* mrb) {
-	  struct RClass *class_cextension = mrb_define_module(mrb, "CExtension");
-	  mrb_define_class_method(mrb, class_cextension, "c_method", mrb_c_method, MRB_ARGS_NONE());
-	}
+```C
+void
+mrb_c_extension_example_gem_init(mrb_state* mrb) {
+  struct RClass *class_cextension = mrb_define_module(mrb, "CExtension");
+  mrb_define_class_method(mrb, class_cextension, "c_method", mrb_c_method, MRB_ARGS_NONE());
+}
+```
 
 ### Finalize
 
@@ -176,10 +239,12 @@ mrbgems expects that you have implemented a C method called
 by the name of your GEM. If you call your GEM *c_extension_example*, your
 finalizer method could look like this:
 
-	void
-	mrb_c_extension_example_gem_final(mrb_state* mrb) {
-	  free(someone);
-	}
+```C
+void
+mrb_c_extension_example_gem_final(mrb_state* mrb) {
+  free(someone);
+}
+```
 
 ### Example
 
@@ -203,6 +268,7 @@ mruby can be extended with pure Ruby. It is possible to override existing
 classes or add new ones in this way. Put all Ruby files into the *mrblib*
 folder.
 
+
 ### Pre-Conditions
 
 none
@@ -229,6 +295,10 @@ mruby can be extended with C and Ruby at the same time. It is possible to
 override existing classes or add new ones in this way. Put all Ruby files
 into the *mrblib* folder and all C files into the *src* folder.
 
+mruby codes under *mrblib* directory would be executed after gem init C
+function is called. Make sure *mruby script* depends on *C code* and
+*C code* doesn't depend on *mruby script*.
+
 ### Pre-Conditions
 
 See C and Ruby example.

data/modules/mruby/examples/mrbgems/c_and_ruby_extension_example/mrbgem.rake

@@ -1,7 +1,7 @@
 MRuby::Gem::Specification.new('c_and_ruby_extension_example') do |spec|
   spec.license = 'MIT'
   spec.author  = 'mruby developers'
- 
+
   # Add compile flags
   # spec.cc.flags << ''
 

data/modules/mruby/examples/mrbgems/c_and_ruby_extension_example/src/example.c

@@ -16,5 +16,5 @@ mrb_c_and_ruby_extension_example_gem_init(mrb_state* mrb) {
 
 void
 mrb_c_and_ruby_extension_example_gem_final(mrb_state* mrb) {
-  // finalizer
+  /* finalizer */
 }

data/modules/mruby/examples/mrbgems/c_extension_example/mrbgem.rake

@@ -1,7 +1,7 @@
 MRuby::Gem::Specification.new('c_extension_example') do |spec|
   spec.license = 'MIT'
   spec.author  = 'mruby developers'
- 
+
   # Add compile flags
   # spec.cc.flags << '-g'
 

data/modules/mruby/examples/mrbgems/c_extension_example/src/example.c

@@ -16,5 +16,5 @@ mrb_c_extension_example_gem_init(mrb_state* mrb) {
 
 void
 mrb_c_extension_example_gem_final(mrb_state* mrb) {
-  // finalizer
+  /* finalizer */
 }

data/modules/mruby/examples/mrbgems/ruby_extension_example/mrbgem.rake

@@ -1,7 +1,7 @@
 MRuby::Gem::Specification.new('ruby_extension_example') do |spec|
   spec.license = 'MIT'
   spec.author  = 'mruby developers'
- 
+
   # Add compile flags
   # spec.cc.flags << ''
 

data/modules/mruby/examples/targets/{ArduinoDue.rb → build_config_ArduinoDue.rb}

@@ -1,15 +1,36 @@
+MRuby::Build.new do |conf|
+
+  # Gets set by the VS command prompts.
+  if ENV['VisualStudioVersion'] || ENV['VSINSTALLDIR']
+    toolchain :visualcpp
+  else
+    toolchain :gcc
+  end
+
+  enable_debug
+
+  # include the default GEMs
+  conf.gembox 'default'
+
+end
+
 # Cross Compiling configuration for Arduino Due
 # http://arduino.cc/en/Main/ArduinoBoardDue
 #
 # Requires Arduino IDE >= 1.5
-MRuby::CrossBuild.new("Arduino Due") do |conf|
+MRuby::CrossBuild.new("ArduinoDue") do |conf|
   toolchain :gcc
 
-  # Mac OS X
+  # Mac OS X, Arduino IDE <= 1.5.6
   # ARDUINO_PATH = '/Applications/Arduino.app/Contents/Resources/Java'
+  # Mac OS X, Arduino IDE >= 1.5.7
+  # ARDUINO_PATH = '/Applications/Arduino.app/Contents/Java'
   # GNU Linux
   ARDUINO_PATH = '/opt/arduino'
+   # Arduino IDE <= 1.5.6
   BIN_PATH = "#{ARDUINO_PATH}/hardware/tools/g++_arm_none_eabi/bin"
+  # Arduino IDE >= 1.5.7
+  # BIN_PATH = "#{ARDUINO_PATH}/hardware/tools/gcc-arm-none-eabi-4.8.3-2014q1/bin"
   SAM_PATH = "#{ARDUINO_PATH}/hardware/arduino/sam"
   TARGET_PATH = "#{SAM_PATH}/variants/arduino_due_x"
 
@@ -18,8 +39,9 @@ MRuby::CrossBuild.new("Arduino Due") do |conf|
     cc.include_paths << ["#{SAM_PATH}/system/libsam", "#{SAM_PATH}/system/CMSIS/CMSIS/Include/",
                         "#{SAM_PATH}/system/CMSIS/Device/ATMEL/",
                         "#{SAM_PATH}/cores/arduino", "#{SAM_PATH}/libraries","#{TARGET_PATH}"]
-    cc.flags = %w(-g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500 
-                -Dprintf=iprintf -mcpu=cortex-m3 -DF_CPU=84000000L -DARDUINO=152 -D__SAM3X8E__ -mthumb -DUSB_PID=0x003e -DUSB_VID=0x2341 -DUSBCON)
+    cc.flags = %w(-g -Os -w -ffunction-sections -fdata-sections -nostdlib --param max-inline-insns-single=500
+                -Dprintf=iprintf -mcpu=cortex-m3 -DF_CPU=84000000L -DARDUINO=156 -DARDUINO_SAM_DUE -DARDUINO_ARCH_SAM
+                -D__SAM3X8E__ -mthumb -DUSB_PID=0x003e -DUSB_VID=0x2341 -DUSBCON -DUSB_MANUFACTURER="Unknown" -DUSB_PRODUCT="Arduino Due")
     cc.compile_options = "%{flags} -o %{outfile} -c %{infile}"
 
     #configuration for low memory environment
@@ -36,6 +58,7 @@ MRuby::CrossBuild.new("Arduino Due") do |conf|
     cxx.command = conf.cc.command.dup
     cxx.include_paths = conf.cc.include_paths.dup
     cxx.flags = conf.cc.flags.dup
+    cxx.flags << %w(-fno-rtti -fno-exceptions)
     cxx.defines = conf.cc.defines.dup
     cxx.compile_options = conf.cc.compile_options.dup
   end
@@ -51,13 +74,16 @@ MRuby::CrossBuild.new("Arduino Due") do |conf|
   #do not build executable test
   conf.build_mrbtest_lib_only
 
+  #disable C++ exception
+  conf.disable_cxx_exception
+
   #gems from core
-  conf.gem :core => "mruby-print" 
+  conf.gem :core => "mruby-print"
   conf.gem :core => "mruby-math"
   conf.gem :core => "mruby-enum-ext"
 
   #light-weight regular expression
-  conf.gem :github => "masamitsu-murase/mruby-hs-regexp", :branch => "master" 
+  conf.gem :github => "masamitsu-murase/mruby-hs-regexp", :branch => "master"
 
   #Arduino API
   #conf.gem :github =>"kyab/mruby-arduino", :branch => "master"

data/modules/mruby/examples/targets/build_config_IntelGalileo.rb

@@ -0,0 +1,106 @@
+MRuby::Build.new do |conf|
+
+  # Gets set by the VS command prompts.
+  if ENV['VisualStudioVersion'] || ENV['VSINSTALLDIR']
+    toolchain :visualcpp
+  else
+    toolchain :gcc
+  end
+
+  enable_debug
+
+  # include the default GEMs
+  conf.gembox 'default'
+
+end
+
+
+# Cross Compiling configuration for Intel Galileo on Arduino environment
+# http://arduino.cc/en/ArduinoCertified/IntelGalileo
+#
+# Requires Arduino IDE for Intel Galileo
+MRuby::CrossBuild.new("Galileo") do |conf|
+  toolchain :gcc
+
+  # Mac OS X
+  # Assume you renamed Arduino.app to Arduino_Galileo.app
+  GALILEO_ARDUINO_PATH = '/Applications/Arduino_Galileo.app/Contents/Resources/Java'
+  # GNU Linux
+  #ARDUINO_GALILEO_PATH = '/opt/arduino'
+
+  GALILEO_BIN_PATH = "#{GALILEO_ARDUINO_PATH}/hardware/tools/x86/i386-pokysdk-darwin/usr/bin/i586-poky-linux-uclibc"
+  GALILEO_SYSROOT =  "#{GALILEO_ARDUINO_PATH}/hardware/tools/x86/i586-poky-linux-uclibc"
+  GALILEO_X86_PATH = "#{GALILEO_ARDUINO_PATH}/hardware/arduino/x86"
+
+
+  conf.cc do |cc|
+    cc.command = "#{GALILEO_BIN_PATH}/i586-poky-linux-uclibc-gcc"
+    cc.include_paths << ["#{GALILEO_X86_PATH}/cores/arduino", "#{GALILEO_X86_PATH}/variants/galileo_fab_d"]
+    cc.flags = %w(-m32 -march=i586 -c -g -Os -w
+              -ffunction-sections -fdata-sections -MMD -DARDUINO=153)
+    cc.flags << "--sysroot=#{GALILEO_SYSROOT}"
+    cc.compile_options = "%{flags} -o %{outfile} -c %{infile}"
+  end
+
+  conf.cxx do |cxx|
+    cxx.command = "#{GALILEO_BIN_PATH}/i586-poky-linux-uclibc-g++"
+    cxx.include_paths = conf.cc.include_paths.dup
+    cxx.include_paths << "#{GALILEO_ARDUINO_PATH}/hardware/tools/x86/i586-poky-linux-uclibc/usr/include/c++"
+    cxx.include_paths << "#{GALILEO_ARDUINO_PATH}/hardware/tools/x86/i586-poky-linux-uclibc/usr/include/c++/i586-poky-linux-uclibc"
+    cxx.flags = conf.cc.flags.dup
+    cxx.defines = conf.cc.defines.dup
+    cxx.compile_options = conf.cc.compile_options.dup
+  end
+
+  conf.archiver do |archiver|
+    archiver.command = "#{GALILEO_BIN_PATH}/i586-poky-linux-uclibc-ar"
+    archiver.archive_options = 'rcs %{outfile} %{objs}'
+  end
+
+  conf.linker do |linker|
+    linker.command = "#{GALILEO_BIN_PATH}/i586-poky-linux-uclibc-g++"
+    linker.flags = %w(-m32 -march=i586)
+    linker.flags << "--sysroot=#{GALILEO_SYSROOT}"
+    linker.flags << %w(-Os -Wl,--gc-sections)
+    linker.libraries = %w(m pthread)
+  end
+
+  #no executables
+  conf.bins = []
+
+  #do not build executable test
+  conf.build_mrbtest_lib_only
+
+  #official mrbgems
+  conf.gem :core => "mruby-sprintf"
+  conf.gem :core => "mruby-print"
+  conf.gem :core => "mruby-math"
+  conf.gem :core => "mruby-time"
+  conf.gem :core => "mruby-struct"
+  conf.gem :core => "mruby-enum-ext"
+  conf.gem :core => "mruby-string-ext"
+  conf.gem :core => "mruby-numeric-ext"
+  conf.gem :core => "mruby-array-ext"
+  conf.gem :core => "mruby-hash-ext"
+  conf.gem :core => "mruby-range-ext"
+  conf.gem :core => "mruby-proc-ext"
+  conf.gem :core => "mruby-symbol-ext"
+  conf.gem :core => "mruby-random"
+  conf.gem :core => "mruby-object-ext"
+  conf.gem :core => "mruby-objectspace"
+  conf.gem :core => "mruby-fiber"
+  conf.gem :core => "mruby-toplevel-ext"
+
+  #lightweigh regular expression
+  conf.gem :github => "masamitsu-murase/mruby-hs-regexp", :branch => "master"
+
+  #Arduino API
+  #conf.gem :github =>"kyab/mruby-arduino", :branch => "master" do |g|
+  #  g.cxx.include_paths << "#{GALILEO_X86_PATH}/libraries/Wire"
+  #  g.cxx.include_paths << "#{GALILEO_X86_PATH}/libraries/Servo"
+
+    #enable unsupported Servo class
+  #  g.cxx.defines << "MRUBY_ARDUINO_GALILEO_ENABLE_SERVO"
+  #end
+
+end

data/modules/mruby/examples/targets/{chipKitMax32.rb → build_config_chipKITMax32.rb}

@@ -1,3 +1,19 @@
+MRuby::Build.new do |conf|
+
+  # Gets set by the VS command prompts.
+  if ENV['VisualStudioVersion'] || ENV['VSINSTALLDIR']
+    toolchain :visualcpp
+  else
+    toolchain :gcc
+  end
+
+  enable_debug
+
+  # include the default GEMs
+  conf.gembox 'default'
+
+end
+
 # Cross Compiling configuration for Digilent chipKIT Max32
 # http://www.digilentinc.com/Products/Detail.cfm?Prod=CHIPKIT-MAX32
 #
@@ -5,7 +21,7 @@
 #
 # This configuration is based on @kyab's version
 # http://d.hatena.ne.jp/kyab/20130201
-MRuby::CrossBuild.new("chipKitMax32") do |conf|
+MRuby::CrossBuild.new("chipKITMax32") do |conf|
   toolchain :gcc
 
   # Mac OS X
@@ -13,15 +29,15 @@ MRuby::CrossBuild.new("chipKitMax32") do |conf|
   # GNU Linux
   MPIDE_PATH = '/opt/mpide-0023-linux-20120903'
 
-  PIC32_PATH = "#{MPIDE_PATH}/hardware/pic32"  
+  PIC32_PATH = "#{MPIDE_PATH}/hardware/pic32"
 
   conf.cc do |cc|
     cc.command = "#{PIC32_PATH}/compiler/pic32-tools/bin/pic32-gcc"
     cc.include_paths << ["#{PIC32_PATH}/cores/pic32",
                         "#{PIC32_PATH}/variants/Max32",
                         "#{PIC32_PATH}/libraries"]
-    cc.flags = %w(-O2 -mno-smart-io -w -ffunction-sections -fdata-sections -g -mdebugger -Wcast-align 
-                -fno-short-double -mprocessor=32MX795F512L -DF_CPU=80000000L -DARDUINO=23 -D_BOARD_MEGA_ 
+    cc.flags = %w(-O2 -mno-smart-io -w -ffunction-sections -fdata-sections -g -mdebugger -Wcast-align
+                -fno-short-double -mprocessor=32MX795F512L -DF_CPU=80000000L -DARDUINO=23 -D_BOARD_MEGA_
                 -DMPIDEVER=0x01000202 -DMPIDE=23)
     cc.compile_options = "%{flags} -o %{outfile} -c %{infile}"
 
@@ -51,16 +67,19 @@ MRuby::CrossBuild.new("chipKitMax32") do |conf|
   #no executables
   conf.bins = []
 
-  #do not build test executable 
+  #do not build test executable
   conf.build_mrbtest_lib_only
 
+  #disable C++ exception
+  conf.disable_cxx_exception
+
   #gems from core
-  conf.gem :core => "mruby-print" 
+  conf.gem :core => "mruby-print"
   conf.gem :core => "mruby-math"
   conf.gem :core => "mruby-enum-ext"
 
   #light-weight regular expression
-  conf.gem :github => "masamitsu-murase/mruby-hs-regexp", :branch => "master" 
+  conf.gem :github => "masamitsu-murase/mruby-hs-regexp", :branch => "master"
 
   #Arduino API
   #conf.gem :github =>"kyab/mruby-arduino", :branch => "master"

data/modules/mruby/include/mrbconf.h

@@ -24,7 +24,7 @@
 //#define MRB_ENDIAN_BIG
 
 /* represent mrb_value as a word (natural unit of data for the processor) */
-// #define MRB_WORD_BOXING
+//#define MRB_WORD_BOXING
 
 /* argv max size in mrb_funcall */
 //#define MRB_FUNCALL_ARGC_MAX 16
@@ -38,6 +38,13 @@
 /* initial size for IV khash; ignored when MRB_USE_IV_SEGLIST is set */
 //#define MRB_IVHASH_INIT_SIZE 8
 
+/* if _etext and _edata available, mruby can reduce memory used by symbols */
+//#define MRB_USE_ETEXT_EDATA
+
+/* do not use __init_array_start to determine readonly data section;
+   effective only when MRB_USE_ETEXT_EDATA is defined */
+//#define MRB_NO_INIT_ARRAY_START
+
 /* turn off generational GC by default */
 //#define MRB_GC_TURN_OFF_GENERATIONAL
 
@@ -59,6 +66,12 @@
 /* fixed size GC arena */
 //#define MRB_GC_FIXED_ARENA
 
+/* state atexit stack size */
+//#define MRB_FIXED_STATE_ATEXIT_STACK_SIZE 5
+
+/* fixed size state atexit stack */
+//#define MRB_FIXED_STATE_ATEXIT_STACK
+
 /* -DDISABLE_XXXX to drop following features */
 //#define DISABLE_STDIO		/* use of stdio */
 
@@ -87,4 +100,15 @@
 # define TRUE 1
 #endif
 
+#if defined(MRB_BUILD_AS_DLL)
+
+#if defined(MRB_CORE) || defined(MRB_LIB)
+#define MRB_API __declspec(dllexport)
+#else
+#define MRB_API __declspec(dllimport)
+#endif
+#else
+#define MRB_API extern
+#endif
+
 #endif  /* MRUBYCONF_H */