webruby 0.2.7 → 0.9.1

data/modules/emscripten/third_party/lzma.js/lzip/ChangeLog

@@ -1,201 +0,0 @@
-2011-04-30  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.12 released.
-	* main.cc: Added new option `-F, --recompress'.
-	* encoder.h (update_prices): Update high length symbol prices
-	  independently of the value of `pos_state'. This gives better
-	  compression for large values of `--match-length' without being
-	  slower.
-	* encoder.h encoder.cc: Optimize pair price calculations. This
-	  reduces compression time for large values of `--match-length'
-	  by up to 6%.
-	* Compression time of option `-0' has been reduced by 2%.
-	* main.cc (decompress): Print only one status line for each
-	  multimember file when only one `-v' is specified.
-	* main.cc (decompress): Print up to 6 bytes of trailing garbage
-	  when `-vvvv' is specified.
-	* main.cc (open_instream): Do not show the message
-	  " and `--stdout' was not specified" for directories, etc.
-	* lziprecover.cc: If `-v' is not specified show errors only.
-	* testsuite/unzcrash.cc: Use Arg_parser.
-	* testsuite/unzcrash.cc: Added new options `-b', `-p' and `-s'.
-
-2010-09-16  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.11 released.
-	* Added new option `-0' which produces a compression speed and
-	  ratio comparable to those of `gzip -9'.
-	* fast_encoder.h fast_encoder.cc: New files.
-	* main.cc: Match length limit set by options -1 to -8 has been
-	  reduced to extend range of use towards gzip. Lower numbers now
-	  compress less but faster. (-1 now takes 43% less time for only
-	  20% larger compressed size).
-	* encoder.cc: Compression of option -9 has been slightly increased.
-	* lziprecover.cc: Added new option `--merge' which tries to
-	  produce a correct file merging the good parts of two or more
-	  damaged copies.
-	* lziprecover.cc: Added new option `--repair' for repairing a
-	  1-byte error in single-member files.
-	* decoder.cc (decode_member): Detect file errors earlier to
-	  improve efficiency of lziprecover's new repair capability.
-	  This change also prevents (harmless) access to uninitialized
-	  memory when decompressing a corrupt file.
-	* lziprecover.cc: Added new option `--force'.
-	* lziprecover.cc: Added new option `--output'.
-	* lziprecover.cc: Added new option `--split' to select the until
-	  now only operation of splitting multimember files.
-	* lziprecover.cc: If no operation is specified, warn the user
-	  and do nothing.
-	* main.cc: Fixed warning about fchown's return value being ignored.
-	* decoder.cc: `-tvvvv' now also shows compression ratio.
-	* main.cc: Set stdin/stdout in binary mode on MSVC and OS2.
-	* New examples have been added to the manual.
-	* testsuite: `test1' renamed to `test.txt'. Added new tests.
-	* Matchfinder types HC4 (4 bytes hash-chain) and HT4 (4 bytes
-	  hash-table) have been tested and found no better than the
-	  current BT4.
-
-2010-04-05  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.10 released.
-	* decoder.h: Input_buffer integrated in Range_decoder.
-	* main.cc: File specified with option `-o' is now created with
-	  mode 0666 if umask allows it, deleted if interrupted by user.
-	* main.cc: New constant `o_binary'.
-	* main.cc: Dictionary size for options -2, -3, -4 and -8 has
-	  been changed to improve linearity of compressed sizes.
-	* lzip.h: Fixed warnings produced by over-optimization (-O3).
-	* Makefile.in: Added quotes to directory names.
-
-2010-01-17  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.9 released.
-	* main.cc (main): Return at least 1 if closing stdout fails.
-	* Makefile.in: Added `--name' option to help2man invocation.
-	* testsuite/check.sh: Use `test1' instead of `COPYING' for testing.
-
-2009-09-02  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.8 released.
-	* Compression time has been reduced by 4%.
-	* Lzdiff and lzgrep have been moved to the new package zutils.
-	* Fixed warnings on sistems where uint32_t != unsigned int.
-
-2009-06-25  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.7 released.
-	* decoder.h (copy_block): Fixed memcpy overlap introduced in 1.6.
-
-2009-06-22  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.6 released.
-	* Decompression time has been reduced by 17%.
-	* Added decompression support for Sync Flush marker.
-	* Added support for .tbz extension to lzdiff and lzgrep.
-	* Added man pages for lzdiff, lzgrep and lziprecover.
-	* encoder.cc (Matchfinder): Reduce memory use to 9x if input file
-	  is smaller than dictionary size limit.
-	* decoder.cc: Added extra flush calls to improve partial
-	  decompression of corrupt files.
-	* `--test' no more needs `/dev/null'.
-	* Removed some `bashisms' from lzdiff and lzgrep.
-	* Dictionary size for options `-1' to `-4' has been changed.
-	* main.cc (signal_handler): Declared as `extern "C"'.
-	* Makefile.in: Extra files are now installed by default.
-	* testsuite/check.sh: Test lziprecover.
-	* Added `export LC_ALL=C' to all scripts.
-
-2009-04-12  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.5 released.
-	* lzip.h: Coded dictionary size implemented in File_header.
-	* Fixed some includes that prevented compilation with GCC 4.4.
-	* `member_size' and `volume_size' are now accurate limits.
-	* Compression speed has been improved.
-	* Implemented bt4 type matchfinder.
-	* Added chapter `Algorithm' to the manual.
-	* Lzdiff and lzgrep now accept `-h' for `--help' and
-	  `-V' for `--version'.
-	* Makefile.in: Man page is now installed by default.
-	* testsuite/check.sh: Verify that files are open in binary mode.
-
-2009-01-24  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.4 released.
-	* Implemented compression of version 1 files.
-	* Added new option `--member-size'.
-	* Added new option `--volume-size'.
-	* Added new option `--output'.
-	* main.cc: Read from non regular files if `--stdout' is specified.
-	* Added `lziprecover', a member recoverer program.
-	* testsuite/unzcrash.cc: Test all 1-byte errors.
-
-2008-12-21  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.3 released.
-	* This version automatically chooses the smallest possible
-	  dictionary size for each file during compression, saving
-	  memory during decompression.
-	* Implemented decompression of version 1 files.
-	* testsuite/check.sh: Replaced `diff -q' with `cmp'.
-
-2008-12-10  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.2 released.
-	* encoder.cc: A 1-byte read outside allocated memory has been fixed.
-	* lzip.h: Dictionary size limit has been reduced to 512MiB because
-	  setting it to 1GiB causes overflow of a 32 bit integer.
-	* Added `lzdiff', a diff/cmp wrapper for gzip, bzip2, lzip and
-	  non-compressed files.
-	* Added `lzgrep', a grep wrapper for gzip, bzip2, lzip and
-	  non-compressed files.
-	* `make install-info' should now work on Debian and OS X.
-
-2008-11-17  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.1 released.
-	* Changed short name of option `--dictionary-size' to `-s'.
-	* Changed short name of option `--match-length' to `-m'.
-	* Changed LONG_LONG_MAX to LLONG_MAX.
-
-2008-10-14  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 1.0 released.
-	* `-tvv' shows file version and dictionary size.
-
-2008-09-30  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 0.5 released.
-	* Decompression is now 1% faster.
-
-2008-09-23  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 0.4 released.
-	* Code cleanup for global variable `verbosity'.
-	* Regained the compression ratio of 0.2 with 5% faster speed.
-	* Fixed compilation on sistems where size_t != unsigned int.
-
-2008-09-15  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 0.3 released.
-	* encoder.cc: Compression is now 15% faster, 1% worse.
-	* main.cc (main): Make `-t' option override `-c'.
-	* main.cc (decompress): Show `done' instead of `ok' when not testing.
-	* encoder.h: Use trials[] to return the list of pairs.
-
-2008-09-09  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 0.2 released.
-	* encoder.cc: Small improvements in compression speed.
-	* Small documentation changes.
-
-2008-08-20  Antonio Diaz Diaz  <ant_diaz@teleline.es>
-
-	* Version 0.1 released.
-
-
-Copyright (C) 2008, 2009, 2010, 2011 Antonio Diaz Diaz.
-
-This file is a collection of facts, and thus it is not copyrightable,
-but just in case, you have unlimited permission to copy, distribute and
-modify it.

data/modules/emscripten/third_party/lzma.js/lzip/INSTALL

@@ -1,56 +0,0 @@
-Requirements
-------------
-You will need a C++ compiler.
-I use gcc 4.3.5 and 3.3.6, but the code should compile with any
-standards compliant compiler.
-Gcc is available at http://gcc.gnu.org.
-
-
-Procedure
----------
-1. Unpack the archive if you have not done so already:
-
-	lzip -cd lzip[version].tar.lz | tar -xf -
-or
-	gzip -cd lzip[version].tar.gz | tar -xf -
-
-This creates the directory ./lzip[version] containing the source from
-the main archive.
-
-2. Change to lzip directory and run configure.
-   (Try `configure --help' for usage instructions).
-
-	cd lzip[version]
-	./configure
-
-3. Run make.
-
-	make
-
-4. Optionally, type `make check' to run the tests that come with lzip.
-
-5. Type `make install' to install the programs and any data files and
-   documentation.
-
-
-Another way
------------
-You can also compile lzip into a separate directory. To do this, you
-must use a version of `make' that supports the `VPATH' variable, such
-as GNU `make'. `cd' to the directory where you want the object files
-and executables to go and run the `configure' script. `configure'
-automatically checks for the source code in `.', in `..' and in the
-directory that `configure' is in.
-
-`configure' recognizes the option `--srcdir=DIR' to control where to
-look for the sources. Usually `configure' can determine that directory
-automatically.
-
-After running `configure', you can run `make' and `make install' as
-explained above.
-
-
-Copyright (C) 2008, 2009, 2010, 2011 Antonio Diaz Diaz.
-
-This file is free documentation: you have unlimited permission to copy,
-distribute and modify it.

data/modules/emscripten/third_party/lzma.js/lzip/Makefile

@@ -1,160 +0,0 @@
-# Makefile for Lzip - Data compressor based on the LZMA algorithm
-# Copyright (C) 2008, 2009, 2010, 2011 Antonio Diaz Diaz.
-# This file was generated automatically by configure. Do not edit.
-#
-# This Makefile is free software: you have unlimited permission
-# to copy, distribute and modify it.
-
-pkgname = lzip
-pkgversion = 1.12
-progname = lzip
-VPATH = .
-prefix = /usr/local
-exec_prefix = $(prefix)
-bindir = $(exec_prefix)/bin
-datadir = $(prefix)/share
-infodir = $(datadir)/info
-mandir = $(datadir)/man
-sysconfdir = $(prefix)/etc
-CXX = g++
-CPPFLAGS = 
-CXXFLAGS = -Wall -W -O2
-LDFLAGS = 
-
-DISTNAME = $(pkgname)-$(pkgversion)
-INSTALL = install
-INSTALL_PROGRAM = $(INSTALL) -p -m 755
-INSTALL_DATA = $(INSTALL) -p -m 644
-INSTALL_DIR = $(INSTALL) -d -m 755
-SHELL = /bin/sh
-
-objs = arg_parser.o decoder.o encoder.o fast_encoder.o main.o
-recobjs = arg_parser.o decoder.o lziprecover.o
-unzobjs = arg_parser.o unzcrash.o
-
-
-.PHONY : all install install-info install-man install-strip \
-         uninstall uninstall-info uninstall-man \
-         doc info man check dist clean distclean
-
-all : $(progname) lziprecover
-
-$(progname) : $(objs)
-	$(CXX) $(LDFLAGS) -o $@ $(objs)
-
-$(progname)_profiled : $(objs)
-	$(CXX) $(LDFLAGS) -pg -o $@ $(objs)
-
-lziprecover : $(recobjs)
-	$(CXX) $(LDFLAGS) -o $@ $(recobjs)
-
-unzcrash : $(unzobjs)
-	$(CXX) $(LDFLAGS) -o $@ $(unzobjs)
-
-main.o : main.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
-
-lziprecover.o : lziprecover.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
-
-unzcrash.o : testsuite/unzcrash.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
-
-%.o : %.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c -o $@ $<
-
-$(objs)        : Makefile
-arg_parser.o   : arg_parser.h
-decoder.o      : lzip.h decoder.h
-encoder.o      : lzip.h encoder.h
-fast_encoder.o : lzip.h encoder.h fast_encoder.h
-main.o         : arg_parser.h lzip.h decoder.h encoder.h fast_encoder.h
-lziprecover.o  : arg_parser.h lzip.h decoder.h Makefile
-unzcrash.o     : arg_parser.h Makefile
-
-
-doc : info man
-
-info : $(VPATH)/doc/$(pkgname).info
-
-$(VPATH)/doc/$(pkgname).info : $(VPATH)/doc/$(pkgname).texinfo
-	cd $(VPATH)/doc && makeinfo $(pkgname).texinfo
-
-man : $(VPATH)/doc/$(progname).1 $(VPATH)/doc/lziprecover.1
-
-$(VPATH)/doc/$(progname).1 : $(progname)
-	help2man -n 'reduces the size of files' \
-	  -o $@ ./$(progname)
-
-$(VPATH)/doc/lziprecover.1 : lziprecover
-	help2man -n 'recovers data from damaged lzip files' \
-	  -o $@ --no-info ./lziprecover
-
-Makefile : $(VPATH)/configure $(VPATH)/Makefile.in
-	./config.status
-
-check : all
-	@$(VPATH)/testsuite/check.sh $(VPATH)/testsuite $(pkgversion)
-
-install : all install-info install-man
-	if [ ! -d "$(DESTDIR)$(bindir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(bindir)" ; fi
-	$(INSTALL_PROGRAM) ./$(progname) "$(DESTDIR)$(bindir)/$(progname)"
-	$(INSTALL_PROGRAM) ./lziprecover "$(DESTDIR)$(bindir)/lziprecover"
-
-install-info :
-	if [ ! -d "$(DESTDIR)$(infodir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(infodir)" ; fi
-	$(INSTALL_DATA) $(VPATH)/doc/$(pkgname).info "$(DESTDIR)$(infodir)/$(pkgname).info"
-	-install-info --info-dir="$(DESTDIR)$(infodir)" $(DESTDIR)$(infodir)/$(pkgname).info
-
-install-man :
-	if [ ! -d "$(DESTDIR)$(mandir)/man1" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" ; fi
-	$(INSTALL_DATA) $(VPATH)/doc/$(progname).1 "$(DESTDIR)$(mandir)/man1/$(progname).1"
-	$(INSTALL_DATA) $(VPATH)/doc/lziprecover.1 "$(DESTDIR)$(mandir)/man1/lziprecover.1"
-
-install-strip : all
-	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
-
-uninstall : uninstall-info uninstall-man
-	-rm -f "$(DESTDIR)$(bindir)/$(progname)"
-	-rm -f "$(DESTDIR)$(bindir)/lziprecover"
-
-uninstall-info :
-	-install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$(pkgname).info"
-	-rm -f "$(DESTDIR)$(infodir)/$(pkgname).info"
-
-uninstall-man :
-	-rm -f "$(DESTDIR)$(mandir)/man1/$(progname).1"
-	-rm -f "$(DESTDIR)$(mandir)/man1/lziprecover.1"
-
-dist : doc
-	ln -sf $(VPATH) $(DISTNAME)
-	tar -cvf $(DISTNAME).tar \
-	  $(DISTNAME)/AUTHORS \
-	  $(DISTNAME)/COPYING \
-	  $(DISTNAME)/ChangeLog \
-	  $(DISTNAME)/INSTALL \
-	  $(DISTNAME)/Makefile.in \
-	  $(DISTNAME)/NEWS \
-	  $(DISTNAME)/README \
-	  $(DISTNAME)/configure \
-	  $(DISTNAME)/doc/$(progname).1 \
-	  $(DISTNAME)/doc/lziprecover.1 \
-	  $(DISTNAME)/doc/$(pkgname).info \
-	  $(DISTNAME)/doc/$(pkgname).texinfo \
-	  $(DISTNAME)/testsuite/check.sh \
-	  $(DISTNAME)/testsuite/test.txt \
-	  $(DISTNAME)/testsuite/test_bad[1-5].lz \
-	  $(DISTNAME)/testsuite/test_sync.lz \
-	  $(DISTNAME)/testsuite/test_v[01].lz \
-	  $(DISTNAME)/testsuite/unzcrash.cc \
-	  $(DISTNAME)/*.h \
-	  $(DISTNAME)/*.cc
-	rm -f $(DISTNAME)
-	lzip -v -9 $(DISTNAME).tar
-
-clean :
-	-rm -f $(progname) $(progname)_profiled $(objs)
-	-rm -f lziprecover lziprecover.o unzcrash unzcrash.o
-
-distclean : clean
-	-rm -f Makefile config.status *.tar *.tar.lz

data/modules/emscripten/third_party/lzma.js/lzip/Makefile.in

@@ -1,138 +0,0 @@
-
-DISTNAME = $(pkgname)-$(pkgversion)
-INSTALL = install
-INSTALL_PROGRAM = $(INSTALL) -p -m 755
-INSTALL_DATA = $(INSTALL) -p -m 644
-INSTALL_DIR = $(INSTALL) -d -m 755
-SHELL = /bin/sh
-
-objs = arg_parser.o decoder.o encoder.o fast_encoder.o main.o
-recobjs = arg_parser.o decoder.o lziprecover.o
-unzobjs = arg_parser.o unzcrash.o
-
-
-.PHONY : all install install-info install-man install-strip \
-         uninstall uninstall-info uninstall-man \
-         doc info man check dist clean distclean
-
-all : $(progname) lziprecover
-
-$(progname) : $(objs)
-	$(CXX) $(LDFLAGS) -o $@ $(objs)
-
-$(progname)_profiled : $(objs)
-	$(CXX) $(LDFLAGS) -pg -o $@ $(objs)
-
-lziprecover : $(recobjs)
-	$(CXX) $(LDFLAGS) -o $@ $(recobjs)
-
-unzcrash : $(unzobjs)
-	$(CXX) $(LDFLAGS) -o $@ $(unzobjs)
-
-main.o : main.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
-
-lziprecover.o : lziprecover.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
-
-unzcrash.o : testsuite/unzcrash.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -DPROGVERSION=\"$(pkgversion)\" -c -o $@ $<
-
-%.o : %.cc
-	$(CXX) $(CPPFLAGS) $(CXXFLAGS) -c -o $@ $<
-
-$(objs)        : Makefile
-arg_parser.o   : arg_parser.h
-decoder.o      : lzip.h decoder.h
-encoder.o      : lzip.h encoder.h
-fast_encoder.o : lzip.h encoder.h fast_encoder.h
-main.o         : arg_parser.h lzip.h decoder.h encoder.h fast_encoder.h
-lziprecover.o  : arg_parser.h lzip.h decoder.h Makefile
-unzcrash.o     : arg_parser.h Makefile
-
-
-doc : info man
-
-info : $(VPATH)/doc/$(pkgname).info
-
-$(VPATH)/doc/$(pkgname).info : $(VPATH)/doc/$(pkgname).texinfo
-	cd $(VPATH)/doc && makeinfo $(pkgname).texinfo
-
-man : $(VPATH)/doc/$(progname).1 $(VPATH)/doc/lziprecover.1
-
-$(VPATH)/doc/$(progname).1 : $(progname)
-	help2man -n 'reduces the size of files' \
-	  -o $@ ./$(progname)
-
-$(VPATH)/doc/lziprecover.1 : lziprecover
-	help2man -n 'recovers data from damaged lzip files' \
-	  -o $@ --no-info ./lziprecover
-
-Makefile : $(VPATH)/configure $(VPATH)/Makefile.in
-	./config.status
-
-check : all
-	@$(VPATH)/testsuite/check.sh $(VPATH)/testsuite $(pkgversion)
-
-install : all install-info install-man
-	if [ ! -d "$(DESTDIR)$(bindir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(bindir)" ; fi
-	$(INSTALL_PROGRAM) ./$(progname) "$(DESTDIR)$(bindir)/$(progname)"
-	$(INSTALL_PROGRAM) ./lziprecover "$(DESTDIR)$(bindir)/lziprecover"
-
-install-info :
-	if [ ! -d "$(DESTDIR)$(infodir)" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(infodir)" ; fi
-	$(INSTALL_DATA) $(VPATH)/doc/$(pkgname).info "$(DESTDIR)$(infodir)/$(pkgname).info"
-	-install-info --info-dir="$(DESTDIR)$(infodir)" $(DESTDIR)$(infodir)/$(pkgname).info
-
-install-man :
-	if [ ! -d "$(DESTDIR)$(mandir)/man1" ] ; then $(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1" ; fi
-	$(INSTALL_DATA) $(VPATH)/doc/$(progname).1 "$(DESTDIR)$(mandir)/man1/$(progname).1"
-	$(INSTALL_DATA) $(VPATH)/doc/lziprecover.1 "$(DESTDIR)$(mandir)/man1/lziprecover.1"
-
-install-strip : all
-	$(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
-
-uninstall : uninstall-info uninstall-man
-	-rm -f "$(DESTDIR)$(bindir)/$(progname)"
-	-rm -f "$(DESTDIR)$(bindir)/lziprecover"
-
-uninstall-info :
-	-install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$(pkgname).info"
-	-rm -f "$(DESTDIR)$(infodir)/$(pkgname).info"
-
-uninstall-man :
-	-rm -f "$(DESTDIR)$(mandir)/man1/$(progname).1"
-	-rm -f "$(DESTDIR)$(mandir)/man1/lziprecover.1"
-
-dist : doc
-	ln -sf $(VPATH) $(DISTNAME)
-	tar -cvf $(DISTNAME).tar \
-	  $(DISTNAME)/AUTHORS \
-	  $(DISTNAME)/COPYING \
-	  $(DISTNAME)/ChangeLog \
-	  $(DISTNAME)/INSTALL \
-	  $(DISTNAME)/Makefile.in \
-	  $(DISTNAME)/NEWS \
-	  $(DISTNAME)/README \
-	  $(DISTNAME)/configure \
-	  $(DISTNAME)/doc/$(progname).1 \
-	  $(DISTNAME)/doc/lziprecover.1 \
-	  $(DISTNAME)/doc/$(pkgname).info \
-	  $(DISTNAME)/doc/$(pkgname).texinfo \
-	  $(DISTNAME)/testsuite/check.sh \
-	  $(DISTNAME)/testsuite/test.txt \
-	  $(DISTNAME)/testsuite/test_bad[1-5].lz \
-	  $(DISTNAME)/testsuite/test_sync.lz \
-	  $(DISTNAME)/testsuite/test_v[01].lz \
-	  $(DISTNAME)/testsuite/unzcrash.cc \
-	  $(DISTNAME)/*.h \
-	  $(DISTNAME)/*.cc
-	rm -f $(DISTNAME)
-	lzip -v -9 $(DISTNAME).tar
-
-clean :
-	-rm -f $(progname) $(progname)_profiled $(objs)
-	-rm -f lziprecover lziprecover.o unzcrash unzcrash.o
-
-distclean : clean
-	-rm -f Makefile config.status *.tar *.tar.lz

data/modules/emscripten/third_party/lzma.js/lzip/NEWS

@@ -1,22 +0,0 @@
-Changes in version 1.12:
-
-The option "-F, --recompress", which forces recompression of files whose
-name already has the ".lz" or ".tlz" suffix, has been added.
-
-For large values of "--match-length", compression ratio has been
-slightly increased and compression time has been reduced by up to 6%.
-
-Compression time of option "-0" has been reduced by 2%.
-
-Print only one status line for each multimember file when only one "-v"
-is specified.
-
-Print up to 6 bytes of trailing garbage when "-vvvv" is specified.
-
-Do not show the message "and `--stdout' was not specified" for file
-types that can't be read (directories, etc).
-
-If "--verbose" is not specified, lziprecover now only shows errors and
-warnings.
-
-Options "--bits", "--position" and "--size" has been added to unzcrash.

data/modules/emscripten/third_party/lzma.js/lzip/README

@@ -1,77 +0,0 @@
-Description
-
-Lzip is a lossless data compressor based on the LZMA algorithm, with
-very safe integrity checking and a user interface similar to the one of
-gzip or bzip2. Lzip decompresses almost as fast as gzip and compresses
-better than bzip2, which makes it well suited for software distribution
-and data archiving.
-
-Lziprecover is a data recovery tool for lzip compressed files able to
-repair slightly damaged files, recover badly damaged files from two or
-more copies, and extract undamaged members from multi-member files. If
-the cause of file corruption is damaged media, the combination GNU
-ddrescue + lziprecover is the best option for recovering data from
-multiple damaged copies.
-
-Lzip replaces every file given in the command line with a compressed
-version of itself, with the name "original_name.lz". Each compressed
-file has the same modification date, permissions, and, when possible,
-ownership as the corresponding original, so that these properties can be
-correctly restored at decompression time. Lzip is able to read from some
-types of non regular files if the "--stdout" option is specified.
-
-If no file names are specified, lzip compresses (or decompresses) from
-standard input to standard output. In this case, lzip will decline to
-write compressed output to a terminal, as this would be entirely
-incomprehensible and therefore pointless.
-
-Lzip will correctly decompress a file which is the concatenation of two
-or more compressed files. The result is the concatenation of the
-corresponding uncompressed files. Integrity testing of concatenated
-compressed files is also supported.
-
-Lzip can produce multimember files and safely recover, with lziprecover,
-the undamaged members in case of file damage. Lzip can also split the
-compressed output in volumes of a given size, even when reading from
-standard input. This allows the direct creation of multivolume
-compressed tar archives.
-
-Lzip will automatically use the smallest possible dictionary size
-without exceeding the given limit. Keep in mind that the decompression
-memory requirement is affected at compression time by the choice of
-dictionary size limit.
-
-As a self-check for your protection, lzip stores in the member trailer
-the 32-bit CRC of the original data and the size of the original data,
-to make sure that the decompressed version of the data is identical to
-the original. This guards against corruption of the compressed data, and
-against undetected bugs in lzip (hopefully very unlikely). The chances
-of data corruption going undetected are microscopic, less than one
-chance in 4000 million for each member processed. Be aware, though, that
-the check occurs upon decompression, so it can only tell you that
-something is wrong. It can't help you recover the original uncompressed
-data.
-
-Lzip implements a simplified version of the LZMA (Lempel-Ziv-Markov
-chain-Algorithm) algorithm. The high compression of LZMA comes from
-combining two basic, well-proven compression ideas: sliding dictionaries
-(LZ77/78) and markov models (the thing used by every compression
-algorithm that uses a range encoder or similar order-0 entropy coder as
-its last stage) with segregation of contexts according to what the bits
-are used for.
-
-The ideas embodied in lzip are due to (at least) the following people:
-Abraham Lempel and Jacob Ziv (for the LZ algorithm), Andrey Markov (for
-the definition of Markov chains), G.N.N. Martin (for the definition of
-range encoding), Igor Pavlov (for putting all the above together in
-LZMA), and Julian Seward (for bzip2's CLI and the idea of unzcrash).
-
-
-Copyright (C) 2008, 2009, 2010, 2011 Antonio Diaz Diaz.
-
-This file is free documentation: you have unlimited permission to copy,
-distribute and modify it.
-
-The file Makefile.in is a data file used by configure to produce the
-Makefile. It has the same copyright owner and permissions that configure
-itself.