webruby 0.2.7 → 0.9.1

data/modules/emscripten/system/include/SDL/SDL_hints.h

@@ -1,206 +0,0 @@
-/*
-  Simple DirectMedia Layer
-  Copyright (C) 1997-2011 Sam Lantinga <slouken@libsdl.org>
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-*/
-
-/**
- *  \file SDL_hints.h
- *  
- *  Official documentation for SDL configuration variables
- *
- *  This file contains functions to set and get configuration hints,
- *  as well as listing each of them alphabetically.
- *
- *  The convention for naming hints is SDL_HINT_X, where "SDL_X" is
- *  the environment variable that can be used to override the default.
- *
- *  In general these hints are just that - they may or may not be
- *  supported or applicable on any given platform, but they provide
- *  a way for an application or user to give the library a hint as
- *  to how they would like the library to work.
- */
-
-#ifndef _SDL_hints_h
-#define _SDL_hints_h
-
-#include "SDL_stdinc.h"
-
-#include "begin_code.h"
-/* Set up for C function definitions, even when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-extern "C" {
-/* *INDENT-ON* */
-#endif
-
-/**
- *  \brief  A variable controlling how 3D acceleration is used to accelerate the SDL 1.2 screen surface. 
- *
- *  SDL can try to accelerate the SDL 1.2 screen surface by using streaming
- *  textures with a 3D rendering engine.  This variable controls whether and
- *  how this is done.
- *
- *  This variable can be set to the following values:
- *    "0"       - Disable 3D acceleration
- *    "1"       - Enable 3D acceleration, using the default renderer.
- *    "X"       - Enable 3D acceleration, using X where X is one of the valid rendering drivers.  (e.g. "direct3d", "opengl", etc.)
- *
- *  By default SDL tries to make a best guess for each platform whether
- *  to use acceleration or not.
- */
-#define SDL_HINT_FRAMEBUFFER_ACCELERATION   "SDL_FRAMEBUFFER_ACCELERATION"
-
-/**
- *  \brief  A variable specifying which render driver to use.
- *
- *  If the application doesn't pick a specific renderer to use, this variable
- *  specifies the name of the preferred renderer.  If the preferred renderer
- *  can't be initialized, the normal default renderer is used.
- *
- *  This variable is case insensitive and can be set to the following values:
- *    "direct3d"
- *    "opengl"
- *    "opengles2"
- *    "opengles"
- *    "software"
- *
- *  The default varies by platform, but it's the first one in the list that
- *  is available on the current platform.
- */
-#define SDL_HINT_RENDER_DRIVER              "SDL_RENDER_DRIVER"
-
-/**
- *  \brief  A variable controlling whether the OpenGL render driver uses shaders if they are available.
- *
- *  This variable can be set to the following values:
- *    "0"       - Disable shaders
- *    "1"       - Enable shaders
- *
- *  By default shaders are used if OpenGL supports them.
- */
-#define SDL_HINT_RENDER_OPENGL_SHADERS      "SDL_RENDER_OPENGL_SHADERS"
-
-/**
- *  \brief  A variable controlling the scaling quality
- *
- *  This variable can be set to the following values:
- *    "0" or "nearest" - Nearest pixel sampling
- *    "1" or "linear"  - Linear filtering (supported by OpenGL and Direct3D)
- *    "2" or "best"    - Anisotropic filtering (supported by Direct3D)
- *
- *  By default nearest pixel sampling is used
- */
-#define SDL_HINT_RENDER_SCALE_QUALITY       "SDL_RENDER_SCALE_QUALITY"
-
-/**
- *  \brief  A variable controlling whether updates to the SDL 1.2 screen surface should be synchronized with the vertical refresh, to avoid tearing.
- *
- *  This variable can be set to the following values:
- *    "0"       - Disable vsync
- *    "1"       - Enable vsync
- *
- *  By default SDL does not sync screen surface updates with vertical refresh.
- */
-#define SDL_HINT_RENDER_VSYNC               "SDL_RENDER_VSYNC"
-	
-/**
- *  \brief  A variable controlling whether the idle timer is disabled on iOS.
- *
- *  When an iOS app does not receive touches for some time, the screen is
- *  dimmed automatically. For games where the accelerometer is the only input
- *  this is problematic. This functionality can be disabled by setting this
- *  hint.
- *
- *  This variable can be set to the following values:
- *    "0"       - Enable idle timer
- *    "1"       - Disable idle timer
- */
-#define SDL_HINT_IDLE_TIMER_DISABLED "SDL_IOS_IDLE_TIMER_DISABLED"
-	
-/**
- *  \brief  A variable controlling which orientations are allowed on iOS.
- *
- *  In some circumstances it is necessary to be able to explicitly control
- *  which UI orientations are allowed.
- *
- *  This variable is a space delimited list of the following values:
- *    "LandscapeLeft", "LandscapeRight", "Portrait" "PortraitUpsideDown"
- */
-#define SDL_HINT_ORIENTATIONS "SDL_IOS_ORIENTATIONS"
-
-
-/**
- *  \brief  An enumeration of hint priorities
- */
-typedef enum
-{
-    SDL_HINT_DEFAULT,
-    SDL_HINT_NORMAL,
-    SDL_HINT_OVERRIDE
-} SDL_HintPriority;
-
-
-/**
- *  \brief Set a hint with a specific priority
- *
- *  The priority controls the behavior when setting a hint that already
- *  has a value.  Hints will replace existing hints of their priority and
- *  lower.  Environment variables are considered to have override priority.
- * 
- *  \return SDL_TRUE if the hint was set, SDL_FALSE otherwise
- */
-extern DECLSPEC SDL_bool SDLCALL SDL_SetHintWithPriority(const char *name,
-                                                         const char *value,
-                                                         SDL_HintPriority priority);
-
-/**
- *  \brief Set a hint with normal priority
- * 
- *  \return SDL_TRUE if the hint was set, SDL_FALSE otherwise
- */
-extern DECLSPEC SDL_bool SDLCALL SDL_SetHint(const char *name,
-                                             const char *value);
-
-
-/**
- *  \brief Get a hint
- *  
- *  \return The string value of a hint variable.
- */
-extern DECLSPEC const char * SDLCALL SDL_GetHint(const char *name);
-
-/**
- *  \brief  Clear all hints
- *
- *  This function is called during SDL_Quit() to free stored hints.
- */
-extern DECLSPEC void SDLCALL SDL_ClearHints(void);
-
-
-/* Ends C function definitions when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-}
-/* *INDENT-ON* */
-#endif
-#include "close_code.h"
-
-#endif /* _SDL_hints_h */
-
-/* vi: set ts=4 sw=4 expandtab: */

data/modules/emscripten/system/include/SDL/SDL_image.h

@@ -1,138 +0,0 @@
-/*
-  SDL_image:  An example image loading library for use with SDL
-  Copyright (C) 1997-2012 Sam Lantinga <slouken@libsdl.org>
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-*/
-
-/* A simple library to load images of various formats as SDL surfaces */
-
-#ifndef _SDL_IMAGE_H
-#define _SDL_IMAGE_H
-
-#include "SDL.h"
-#include "SDL_version.h"
-#include "begin_code.h"
-
-/* Set up for C function definitions, even when using C++ */
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* Printable format: "%d.%d.%d", MAJOR, MINOR, PATCHLEVEL
-*/
-#define SDL_IMAGE_MAJOR_VERSION	1
-#define SDL_IMAGE_MINOR_VERSION	2
-#define SDL_IMAGE_PATCHLEVEL	12
-
-/* This macro can be used to fill a version structure with the compile-time
- * version of the SDL_image library.
- */
-#define SDL_IMAGE_VERSION(X)						\
-{									\
-	(X)->major = SDL_IMAGE_MAJOR_VERSION;				\
-	(X)->minor = SDL_IMAGE_MINOR_VERSION;				\
-	(X)->patch = SDL_IMAGE_PATCHLEVEL;				\
-}
-
-/* This function gets the version of the dynamically linked SDL_image library.
-   it should NOT be used to fill a version structure, instead you should
-   use the SDL_IMAGE_VERSION() macro.
- */
-extern DECLSPEC const SDL_version * SDLCALL IMG_Linked_Version(void);
-
-typedef enum
-{
-    IMG_INIT_JPG = 0x00000001,
-    IMG_INIT_PNG = 0x00000002,
-    IMG_INIT_TIF = 0x00000004,
-    IMG_INIT_WEBP = 0x00000008
-} IMG_InitFlags;
-
-/* Loads dynamic libraries and prepares them for use.  Flags should be
-   one or more flags from IMG_InitFlags OR'd together.
-   It returns the flags successfully initialized, or 0 on failure.
- */
-extern DECLSPEC int SDLCALL IMG_Init(int flags);
-
-/* Unloads libraries loaded with IMG_Init */
-extern DECLSPEC void SDLCALL IMG_Quit(void);
-
-/* Load an image from an SDL data source.
-   The 'type' may be one of: "BMP", "GIF", "PNG", etc.
-
-   If the image format supports a transparent pixel, SDL will set the
-   colorkey for the surface.  You can enable RLE acceleration on the
-   surface afterwards by calling:
-	SDL_SetColorKey(image, SDL_RLEACCEL, image->format->colorkey);
- */
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTyped_RW(SDL_RWops *src, int freesrc, char *type);
-/* Convenience functions */
-extern DECLSPEC SDL_Surface * SDLCALL IMG_Load(const char *file);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_Load_RW(SDL_RWops *src, int freesrc);
-
-/* Invert the alpha of a surface for use with OpenGL
-   This function is now a no-op, and only provided for backwards compatibility.
-*/
-extern DECLSPEC int SDLCALL IMG_InvertAlpha(int on);
-
-/* Functions to detect a file type, given a seekable source */
-extern DECLSPEC int SDLCALL IMG_isICO(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isCUR(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isBMP(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isGIF(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isJPG(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isLBM(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isPCX(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isPNG(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isPNM(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isTIF(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isXCF(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isXPM(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isXV(SDL_RWops *src);
-extern DECLSPEC int SDLCALL IMG_isWEBP(SDL_RWops *src);
-
-/* Individual loading functions */
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadICO_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadCUR_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadBMP_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadGIF_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadJPG_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadLBM_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPCX_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPNG_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadPNM_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTGA_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadTIF_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXCF_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXPM_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadXV_RW(SDL_RWops *src);
-extern DECLSPEC SDL_Surface * SDLCALL IMG_LoadWEBP_RW(SDL_RWops *src);
-
-extern DECLSPEC SDL_Surface * SDLCALL IMG_ReadXPMFromArray(char **xpm);
-
-/* We'll use SDL for reporting errors */
-#define IMG_SetError	SDL_SetError
-#define IMG_GetError	SDL_GetError
-
-/* Ends C function definitions when using C++ */
-#ifdef __cplusplus
-}
-#endif
-#include "close_code.h"
-
-#endif /* _SDL_IMAGE_H */

data/modules/emscripten/system/include/SDL/SDL_input.h

@@ -1,87 +0,0 @@
-/*
-  Simple DirectMedia Layer
-  Copyright (C) 1997-2011 Sam Lantinga <slouken@libsdl.org>
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-*/
-
-/**
- *  \file SDL_input.h
- *  
- *  Include file for lowlevel SDL input device handling.
- *
- *  This talks about individual devices, and not the system cursor. If you
- *  just want to know when the user moves the pointer somewhere in your
- *  window, this is NOT the API you want. This one handles things like
- *  multi-touch, drawing tablets, and multiple, separate mice.
- *
- *  The other API is in SDL_mouse.h
- */
-
-#ifndef _SDL_input_h
-#define _SDL_input_h
-
-#include "SDL_stdinc.h"
-#include "SDL_error.h"
-#include "SDL_video.h"
-
-#include "begin_code.h"
-/* Set up for C function definitions, even when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-extern "C" {
-/* *INDENT-ON* */
-#endif
-
-
-/* Function prototypes */
-
-/* !!! FIXME: real documentation
- * - Redetect devices
- * - This invalidates all existing device information from previous queries!
- * - There is an implicit (re)detect upon SDL_Init().
- */
-extern DECLSPEC int SDLCALL SDL_RedetectInputDevices(void);
-
-/**
- *  \brief Get the number of mouse input devices available.
- */
-extern DECLSPEC int SDLCALL SDL_GetNumInputDevices(void);
-
-/**
- *  \brief Gets the name of a device with the given index.
- *  
- *  \param index is the index of the device, whose name is to be returned.
- *  
- *  \return the name of the device with the specified index
- */
-extern DECLSPEC const char *SDLCALL SDL_GetInputDeviceName(int index);
-
-
-extern DECLSPEC int SDLCALL SDL_IsDeviceDisconnected(int index);
-
-/* Ends C function definitions when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-}
-/* *INDENT-ON* */
-#endif
-#include "close_code.h"
-
-#endif /* _SDL_mouse_h */
-
-/* vi: set ts=4 sw=4 expandtab: */

data/modules/emscripten/system/include/SDL/SDL_joystick.h

@@ -1,208 +0,0 @@
-/*
-  Simple DirectMedia Layer
-  Copyright (C) 1997-2011 Sam Lantinga <slouken@libsdl.org>
-
-  This software is provided 'as-is', without any express or implied
-  warranty.  In no event will the authors be held liable for any damages
-  arising from the use of this software.
-
-  Permission is granted to anyone to use this software for any purpose,
-  including commercial applications, and to alter it and redistribute it
-  freely, subject to the following restrictions:
-
-  1. The origin of this software must not be misrepresented; you must not
-     claim that you wrote the original software. If you use this software
-     in a product, an acknowledgment in the product documentation would be
-     appreciated but is not required.
-  2. Altered source versions must be plainly marked as such, and must not be
-     misrepresented as being the original software.
-  3. This notice may not be removed or altered from any source distribution.
-*/
-
-/**
- *  \file SDL_joystick.h
- *  
- *  Include file for SDL joystick event handling
- */
-
-#ifndef _SDL_joystick_h
-#define _SDL_joystick_h
-
-#include "SDL_stdinc.h"
-#include "SDL_error.h"
-
-#include "begin_code.h"
-/* Set up for C function definitions, even when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-extern "C" {
-/* *INDENT-ON* */
-#endif
-
-/**
- *  \file SDL_joystick.h
- *
- *  In order to use these functions, SDL_Init() must have been called
- *  with the ::SDL_INIT_JOYSTICK flag.  This causes SDL to scan the system
- *  for joysticks, and load appropriate drivers.
- */
-
-/* The joystick structure used to identify an SDL joystick */
-struct _SDL_Joystick;
-typedef struct _SDL_Joystick SDL_Joystick;
-
-
-/* Function prototypes */
-/**
- *  Count the number of joysticks attached to the system
- */
-extern DECLSPEC int SDLCALL SDL_NumJoysticks(void);
-
-/**
- *  Get the implementation dependent name of a joystick.
- *  This can be called before any joysticks are opened.
- *  If no name can be found, this function returns NULL.
- */
-extern DECLSPEC const char *SDLCALL SDL_JoystickName(int device_index);
-
-/**
- *  Open a joystick for use.  
- *  The index passed as an argument refers tothe N'th joystick on the system.  
- *  This index is the value which will identify this joystick in future joystick
- *  events.
- *  
- *  \return A joystick identifier, or NULL if an error occurred.
- */
-extern DECLSPEC SDL_Joystick *SDLCALL SDL_JoystickOpen(int device_index);
-
-/**
- *  Returns 1 if the joystick has been opened, or 0 if it has not.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickOpened(int device_index);
-
-/**
- *  Get the device index of an opened joystick.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickIndex(SDL_Joystick * joystick);
-
-/**
- *  Get the number of general axis controls on a joystick.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickNumAxes(SDL_Joystick * joystick);
-
-/**
- *  Get the number of trackballs on a joystick.
- *  
- *  Joystick trackballs have only relative motion events associated
- *  with them and their state cannot be polled.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickNumBalls(SDL_Joystick * joystick);
-
-/**
- *  Get the number of POV hats on a joystick.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickNumHats(SDL_Joystick * joystick);
-
-/**
- *  Get the number of buttons on a joystick.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickNumButtons(SDL_Joystick * joystick);
-
-/**
- *  Update the current state of the open joysticks.
- *  
- *  This is called automatically by the event loop if any joystick
- *  events are enabled.
- */
-extern DECLSPEC void SDLCALL SDL_JoystickUpdate(void);
-
-/**
- *  Enable/disable joystick event polling.
- *  
- *  If joystick events are disabled, you must call SDL_JoystickUpdate()
- *  yourself and check the state of the joystick when you want joystick
- *  information.
- *  
- *  The state can be one of ::SDL_QUERY, ::SDL_ENABLE or ::SDL_IGNORE.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickEventState(int state);
-
-/**
- *  Get the current state of an axis control on a joystick.
- *  
- *  The state is a value ranging from -32768 to 32767.
- *  
- *  The axis indices start at index 0.
- */
-extern DECLSPEC Sint16 SDLCALL SDL_JoystickGetAxis(SDL_Joystick * joystick,
-                                                   int axis);
-
-/**
- *  \name Hat positions
- */
-/*@{*/
-#define SDL_HAT_CENTERED	0x00
-#define SDL_HAT_UP		0x01
-#define SDL_HAT_RIGHT		0x02
-#define SDL_HAT_DOWN		0x04
-#define SDL_HAT_LEFT		0x08
-#define SDL_HAT_RIGHTUP		(SDL_HAT_RIGHT|SDL_HAT_UP)
-#define SDL_HAT_RIGHTDOWN	(SDL_HAT_RIGHT|SDL_HAT_DOWN)
-#define SDL_HAT_LEFTUP		(SDL_HAT_LEFT|SDL_HAT_UP)
-#define SDL_HAT_LEFTDOWN	(SDL_HAT_LEFT|SDL_HAT_DOWN)
-/*@}*/
-
-/**
- *  Get the current state of a POV hat on a joystick.
- *
- *  The hat indices start at index 0.
- *  
- *  \return The return value is one of the following positions:
- *           - ::SDL_HAT_CENTERED
- *           - ::SDL_HAT_UP
- *           - ::SDL_HAT_RIGHT
- *           - ::SDL_HAT_DOWN
- *           - ::SDL_HAT_LEFT
- *           - ::SDL_HAT_RIGHTUP
- *           - ::SDL_HAT_RIGHTDOWN
- *           - ::SDL_HAT_LEFTUP
- *           - ::SDL_HAT_LEFTDOWN
- */
-extern DECLSPEC Uint8 SDLCALL SDL_JoystickGetHat(SDL_Joystick * joystick,
-                                                 int hat);
-
-/**
- *  Get the ball axis change since the last poll.
- *  
- *  \return 0, or -1 if you passed it invalid parameters.
- *  
- *  The ball indices start at index 0.
- */
-extern DECLSPEC int SDLCALL SDL_JoystickGetBall(SDL_Joystick * joystick,
-                                                int ball, int *dx, int *dy);
-
-/**
- *  Get the current state of a button on a joystick.
- *  
- *  The button indices start at index 0.
- */
-extern DECLSPEC Uint8 SDLCALL SDL_JoystickGetButton(SDL_Joystick * joystick,
-                                                    int button);
-
-/**
- *  Close a joystick previously opened with SDL_JoystickOpen().
- */
-extern DECLSPEC void SDLCALL SDL_JoystickClose(SDL_Joystick * joystick);
-
-
-/* Ends C function definitions when using C++ */
-#ifdef __cplusplus
-/* *INDENT-OFF* */
-}
-/* *INDENT-ON* */
-#endif
-#include "close_code.h"
-
-#endif /* _SDL_joystick_h */
-
-/* vi: set ts=4 sw=4 expandtab: */